From df73df138d9d53f7f7570f4fe97a6cde941a2656 Mon Sep 17 00:00:00 2001 From: Laszlo Ersek Date: Thu, 9 Feb 2017 17:32:40 +0100 Subject: [PATCH] OvmfPkg/AcpiPlatformDxe: replay QEMU_LOADER_WRITE_POINTER commands at S3 Ultimately, each QEMU_LOADER_WRITE_POINTER command creates a guest memory reference in some QEMU device. When the virtual machine is reset, the device willfully forgets the guest address, since the guest memory is wholly invalidated during platform reset. ... Unless the reset is part of S3 resume. Then the guest memory is preserved intact, and the firmware must reprogram those devices with the original guest memory allocation addresses. This patch accumulates the fw_cfg select, skip and write operations of ProcessCmdWritePointer() in a validated / condensed form, and turns them into an ACPI S3 Boot Script fragment at the very end of InstallQemuFwCfgTables(). Cc: Jordan Justen Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek Reviewed-by: Jordan Justen --- OvmfPkg/AcpiPlatformDxe/AcpiPlatform.h | 27 ++ OvmfPkg/AcpiPlatformDxe/AcpiPlatformDxe.inf | 2 + OvmfPkg/AcpiPlatformDxe/BootScript.c | 414 ++++++++++++++++++ OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpi.c | 70 ++- .../QemuFwCfgAcpiPlatformDxe.inf | 2 + 5 files changed, 510 insertions(+), 5 deletions(-) create mode 100644 OvmfPkg/AcpiPlatformDxe/BootScript.c diff --git a/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.h b/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.h index 08dd7f8f7d..0f035a0d57 100644 --- a/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.h +++ b/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.h @@ -33,6 +33,8 @@ typedef struct { UINT64 PciAttributes; } ORIGINAL_ATTRIBUTES; +typedef struct S3_CONTEXT S3_CONTEXT; + EFI_STATUS EFIAPI InstallAcpiTable ( @@ -91,5 +93,30 @@ RestorePciDecoding ( IN UINTN Count ); +EFI_STATUS +AllocateS3Context ( + OUT S3_CONTEXT **S3Context, + IN UINTN WritePointerCount + ); + +VOID +ReleaseS3Context ( + IN S3_CONTEXT *S3Context + ); + +EFI_STATUS +SaveCondensedWritePointerToS3Context ( + IN OUT S3_CONTEXT *S3Context, + IN UINT16 PointerItem, + IN UINT8 PointerSize, + IN UINT32 PointerOffset, + IN UINT64 PointerValue + ); + +EFI_STATUS +TransferS3ContextToBootScript ( + IN CONST S3_CONTEXT *S3Context + ); + #endif diff --git a/OvmfPkg/AcpiPlatformDxe/AcpiPlatformDxe.inf b/OvmfPkg/AcpiPlatformDxe/AcpiPlatformDxe.inf index 654d3a0390..bb5f14e0fc 100644 --- a/OvmfPkg/AcpiPlatformDxe/AcpiPlatformDxe.inf +++ b/OvmfPkg/AcpiPlatformDxe/AcpiPlatformDxe.inf @@ -33,6 +33,7 @@ Xen.c EntryPoint.c PciDecoding.c + BootScript.c [Packages] MdePkg/MdePkg.dec @@ -59,6 +60,7 @@ [Protocols] gEfiAcpiTableProtocolGuid # PROTOCOL ALWAYS_CONSUMED gEfiPciIoProtocolGuid # PROTOCOL SOMETIMES_CONSUMED + gEfiS3SaveStateProtocolGuid # PROTOCOL SOMETIMES_CONSUMED [Guids] gEfiXenInfoGuid diff --git a/OvmfPkg/AcpiPlatformDxe/BootScript.c b/OvmfPkg/AcpiPlatformDxe/BootScript.c new file mode 100644 index 0000000000..b7a7f270f2 --- /dev/null +++ b/OvmfPkg/AcpiPlatformDxe/BootScript.c @@ -0,0 +1,414 @@ +/** @file + Append an ACPI S3 Boot Script fragment from the QEMU_LOADER_WRITE_POINTER + commands of QEMU's fully processed table linker/loader script. + + Copyright (C) 2017, Red Hat, Inc. + + This program and the accompanying materials are licensed and made available + under the terms and conditions of the BSD License which accompanies this + distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT + WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +**/ + +#include +#include +#include + +#include "AcpiPlatform.h" + + +// +// Condensed structure for capturing the fw_cfg operations -- select, skip, +// write -- inherent in executing a QEMU_LOADER_WRITE_POINTER command. +// +typedef struct { + UINT16 PointerItem; // resolved from QEMU_LOADER_WRITE_POINTER.PointerFile + UINT8 PointerSize; // copied as-is from QEMU_LOADER_WRITE_POINTER + UINT32 PointerOffset; // copied as-is from QEMU_LOADER_WRITE_POINTER + UINT64 PointerValue; // resolved from QEMU_LOADER_WRITE_POINTER.PointeeFile +} CONDENSED_WRITE_POINTER; + + +// +// Context structure to accumulate CONDENSED_WRITE_POINTER objects from +// QEMU_LOADER_WRITE_POINTER commands. +// +// Any pointers in this structure own the pointed-to objects; that is, when the +// context structure is released, all pointed-to objects must be released too. +// +struct S3_CONTEXT { + CONDENSED_WRITE_POINTER *WritePointers; // one array element per processed + // QEMU_LOADER_WRITE_POINTER + // command + UINTN Allocated; // number of elements allocated for + // WritePointers + UINTN Used; // number of elements populated in + // WritePointers +}; + + +// +// Scratch buffer, allocated in EfiReservedMemoryType type memory, for the ACPI +// S3 Boot Script opcodes to work on. We use the buffer to compose and to +// replay several fw_cfg select+skip and write operations, using the DMA access +// method. The fw_cfg operations will implement the actions dictated by +// CONDENSED_WRITE_POINTER objects. +// +#pragma pack (1) +typedef struct { + FW_CFG_DMA_ACCESS Access; // filled in from + // CONDENSED_WRITE_POINTER.PointerItem, + // CONDENSED_WRITE_POINTER.PointerSize, + // CONDENSED_WRITE_POINTER.PointerOffset + UINT64 PointerValue; // filled in from + // CONDENSED_WRITE_POINTER.PointerValue +} SCRATCH_BUFFER; +#pragma pack () + + +/** + Allocate an S3_CONTEXT object. + + @param[out] S3Context The allocated S3_CONTEXT object is returned + through this parameter. + + @param[in] WritePointerCount Number of CONDENSED_WRITE_POINTER elements to + allocate room for. WritePointerCount must be + positive. + + @retval EFI_SUCCESS Allocation successful. + + @retval EFI_OUT_OF_RESOURCES Out of memory. + + @retval EFI_INVALID_PARAMETER WritePointerCount is zero. +**/ +EFI_STATUS +AllocateS3Context ( + OUT S3_CONTEXT **S3Context, + IN UINTN WritePointerCount + ) +{ + EFI_STATUS Status; + S3_CONTEXT *Context; + + if (WritePointerCount == 0) { + return EFI_INVALID_PARAMETER; + } + + Context = AllocateZeroPool (sizeof *Context); + if (Context == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + Context->WritePointers = AllocatePool (WritePointerCount * + sizeof *Context->WritePointers); + if (Context->WritePointers == NULL) { + Status = EFI_OUT_OF_RESOURCES; + goto FreeContext; + } + + Context->Allocated = WritePointerCount; + *S3Context = Context; + return EFI_SUCCESS; + +FreeContext: + FreePool (Context); + + return Status; +} + + +/** + Release an S3_CONTEXT object. + + @param[in] S3Context The object to release. +**/ +VOID +ReleaseS3Context ( + IN S3_CONTEXT *S3Context + ) +{ + FreePool (S3Context->WritePointers); + FreePool (S3Context); +} + + +/** + Save the information necessary to replicate a QEMU_LOADER_WRITE_POINTER + command during S3 resume, in condensed format. + + This function is to be called from ProcessCmdWritePointer(), after all the + sanity checks have passed, and before the fw_cfg operations are performed. + + @param[in,out] S3Context The S3_CONTEXT object into which the caller wants + to save the information that was derived from + QEMU_LOADER_WRITE_POINTER. + + @param[in] PointerItem The FIRMWARE_CONFIG_ITEM that + QEMU_LOADER_WRITE_POINTER.PointerFile was resolved + to, expressed as a UINT16 value. + + @param[in] PointerSize Copied directly from + QEMU_LOADER_WRITE_POINTER.PointerSize. + + @param[in] PointerOffset Copied directly from + QEMU_LOADER_WRITE_POINTER.PointerOffset. + + @param[in] PointerValue The base address of the allocated / downloaded + fw_cfg blob that is identified by + QEMU_LOADER_WRITE_POINTER.PointeeFile. + + @retval EFI_SUCCESS The information derived from + QEMU_LOADER_WRITE_POINTER has been successfully + absorbed into S3Context. + + @retval EFI_OUT_OF_RESOURCES No room available in S3Context. +**/ +EFI_STATUS +SaveCondensedWritePointerToS3Context ( + IN OUT S3_CONTEXT *S3Context, + IN UINT16 PointerItem, + IN UINT8 PointerSize, + IN UINT32 PointerOffset, + IN UINT64 PointerValue + ) +{ + CONDENSED_WRITE_POINTER *Condensed; + + if (S3Context->Used == S3Context->Allocated) { + return EFI_OUT_OF_RESOURCES; + } + Condensed = S3Context->WritePointers + S3Context->Used; + Condensed->PointerItem = PointerItem; + Condensed->PointerSize = PointerSize; + Condensed->PointerOffset = PointerOffset; + Condensed->PointerValue = PointerValue; + DEBUG ((DEBUG_VERBOSE, "%a: 0x%04x/[0x%08x+%d] := 0x%Lx (%Lu)\n", + __FUNCTION__, PointerItem, PointerOffset, PointerSize, PointerValue, + (UINT64)S3Context->Used)); + ++S3Context->Used; + return EFI_SUCCESS; +} + + +/** + Translate and append the information from an S3_CONTEXT object to the ACPI S3 + Boot Script. + + The effects of a successful call to this function cannot be undone. + + @param[in] S3Context The S3_CONTEXT object to translate to ACPI S3 Boot + Script opcodes. + + @retval EFI_OUT_OF_RESOURCES Out of memory. + + @retval EFI_SUCCESS The translation of S3Context to ACPI S3 Boot + Script opcodes has been successful. + + @return Error codes from underlying functions. +**/ +EFI_STATUS +TransferS3ContextToBootScript ( + IN CONST S3_CONTEXT *S3Context + ) +{ + EFI_STATUS Status; + EFI_S3_SAVE_STATE_PROTOCOL *S3SaveState; + SCRATCH_BUFFER *ScratchBuffer; + FW_CFG_DMA_ACCESS *Access; + UINT64 BigEndianAddressOfAccess; + UINT32 ControlPollData; + UINT32 ControlPollMask; + UINTN Index; + + // + // If the following protocol lookup fails, it shall not happen due to an + // unexpected DXE driver dispatch order. + // + // Namely, this function is only invoked on QEMU. Therefore it is only + // reached after Platform BDS signals gRootBridgesConnectedEventGroupGuid + // (see OnRootBridgesConnected() in "EntryPoint.c"). Hence, because + // TransferS3ContextToBootScript() is invoked in BDS, all DXE drivers, + // including S3SaveStateDxe (producing EFI_S3_SAVE_STATE_PROTOCOL), have been + // dispatched by the time we get here. (S3SaveStateDxe is not expected to + // have any stricter-than-TRUE DEPEX -- not a DEPEX that gets unblocked only + // within BDS anyway.) + // + // Reaching this function also depends on QemuFwCfgS3Enabled(). That implies + // S3SaveStateDxe has not exited immediately due to S3 being disabled. Thus + // EFI_S3_SAVE_STATE_PROTOCOL can only be missing for genuinely unforeseeable + // reasons. + // + Status = gBS->LocateProtocol (&gEfiS3SaveStateProtocolGuid, + NULL /* Registration */, (VOID **)&S3SaveState); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: LocateProtocol(): %r\n", __FUNCTION__, Status)); + return Status; + } + + ScratchBuffer = AllocateReservedPool (sizeof *ScratchBuffer); + if (ScratchBuffer == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + // + // Set up helper variables that we'll use identically for all + // CONDENSED_WRITE_POINTER elements. + // + Access = &ScratchBuffer->Access; + BigEndianAddressOfAccess = SwapBytes64 ((UINTN)Access); + ControlPollData = 0; + ControlPollMask = MAX_UINT32; + + // + // For each CONDENSED_WRITE_POINTER, we need six ACPI S3 Boot Script opcodes: + // (1) restore an FW_CFG_DMA_ACCESS object in reserved memory that selects + // the writeable fw_cfg file PointerFile (through PointerItem), and skips + // to PointerOffset in it, + // (2) call QEMU with the FW_CFG_DMA_ACCESS object, + // (3) wait for the select+skip to finish, + // (4) restore a SCRATCH_BUFFER object in reserved memory that writes + // PointerValue (base address of the allocated / downloaded PointeeFile), + // of size PointerSize, into the fw_cfg file selected in (1), at the + // offset sought to in (1), + // (5) call QEMU with the FW_CFG_DMA_ACCESS object, + // (6) wait for the write to finish. + // + // EFI_S3_SAVE_STATE_PROTOCOL does not allow rolling back opcode additions, + // therefore we treat any failure here as fatal. + // + for (Index = 0; Index < S3Context->Used; ++Index) { + CONST CONDENSED_WRITE_POINTER *Condensed; + + Condensed = &S3Context->WritePointers[Index]; + + // + // (1) restore an FW_CFG_DMA_ACCESS object in reserved memory that selects + // the writeable fw_cfg file PointerFile (through PointerItem), and + // skips to PointerOffset in it, + // + Access->Control = SwapBytes32 ((UINT32)Condensed->PointerItem << 16 | + FW_CFG_DMA_CTL_SELECT | FW_CFG_DMA_CTL_SKIP); + Access->Length = SwapBytes32 (Condensed->PointerOffset); + Access->Address = 0; + Status = S3SaveState->Write ( + S3SaveState, // This + EFI_BOOT_SCRIPT_MEM_WRITE_OPCODE, // OpCode + EfiBootScriptWidthUint8, // Width + (UINT64)(UINTN)Access, // Address + sizeof *Access, // Count + Access // Buffer + ); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: Index %Lu opcode 1: %r\n", __FUNCTION__, + (UINT64)Index, Status)); + goto FatalError; + } + + // + // (2) call QEMU with the FW_CFG_DMA_ACCESS object, + // + Status = S3SaveState->Write ( + S3SaveState, // This + EFI_BOOT_SCRIPT_IO_WRITE_OPCODE, // OpCode + EfiBootScriptWidthUint32, // Width + (UINT64)0x514, // Address + (UINTN)2, // Count + &BigEndianAddressOfAccess // Buffer + ); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: Index %Lu opcode 2: %r\n", __FUNCTION__, + (UINT64)Index, Status)); + goto FatalError; + } + + // + // (3) wait for the select+skip to finish, + // + Status = S3SaveState->Write ( + S3SaveState, // This + EFI_BOOT_SCRIPT_MEM_POLL_OPCODE, // OpCode + EfiBootScriptWidthUint32, // Width + (UINT64)(UINTN)&Access->Control, // Address + &ControlPollData, // Data + &ControlPollMask, // DataMask + MAX_UINT64 // Delay + ); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: Index %Lu opcode 3: %r\n", __FUNCTION__, + (UINT64)Index, Status)); + goto FatalError; + } + + // + // (4) restore a SCRATCH_BUFFER object in reserved memory that writes + // PointerValue (base address of the allocated / downloaded + // PointeeFile), of size PointerSize, into the fw_cfg file selected in + // (1), at the offset sought to in (1), + // + Access->Control = SwapBytes32 (FW_CFG_DMA_CTL_WRITE); + Access->Length = SwapBytes32 (Condensed->PointerSize); + Access->Address = SwapBytes64 ((UINTN)&ScratchBuffer->PointerValue); + ScratchBuffer->PointerValue = Condensed->PointerValue; + Status = S3SaveState->Write ( + S3SaveState, // This + EFI_BOOT_SCRIPT_MEM_WRITE_OPCODE, // OpCode + EfiBootScriptWidthUint8, // Width + (UINT64)(UINTN)ScratchBuffer, // Address + sizeof *ScratchBuffer, // Count + ScratchBuffer // Buffer + ); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: Index %Lu opcode 4: %r\n", __FUNCTION__, + (UINT64)Index, Status)); + goto FatalError; + } + + // + // (5) call QEMU with the FW_CFG_DMA_ACCESS object, + // + Status = S3SaveState->Write ( + S3SaveState, // This + EFI_BOOT_SCRIPT_IO_WRITE_OPCODE, // OpCode + EfiBootScriptWidthUint32, // Width + (UINT64)0x514, // Address + (UINTN)2, // Count + &BigEndianAddressOfAccess // Buffer + ); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: Index %Lu opcode 5: %r\n", __FUNCTION__, + (UINT64)Index, Status)); + goto FatalError; + } + + // + // (6) wait for the write to finish. + // + Status = S3SaveState->Write ( + S3SaveState, // This + EFI_BOOT_SCRIPT_MEM_POLL_OPCODE, // OpCode + EfiBootScriptWidthUint32, // Width + (UINT64)(UINTN)&Access->Control, // Address + &ControlPollData, // Data + &ControlPollMask, // DataMask + MAX_UINT64 // Delay + ); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: Index %Lu opcode 6: %r\n", __FUNCTION__, + (UINT64)Index, Status)); + goto FatalError; + } + } + + DEBUG ((DEBUG_VERBOSE, "%a: boot script fragment saved, ScratchBuffer=%p\n", + __FUNCTION__, (VOID *)ScratchBuffer)); + return EFI_SUCCESS; + +FatalError: + ASSERT (FALSE); + CpuDeadLoop (); + return Status; +} diff --git a/OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpi.c b/OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpi.c index de827c2df2..eadd690bef 100644 --- a/OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpi.c +++ b/OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpi.c @@ -360,6 +360,11 @@ ProcessCmdAddChecksum ( @param[in] Tracker The ORDERED_COLLECTION tracking the BLOB user structures created thus far. + @param[in,out] S3Context The S3_CONTEXT object capturing the fw_cfg actions + of successfully processed QEMU_LOADER_WRITE_POINTER + commands, to be replayed at S3 resume. S3Context + may be NULL if S3 is disabled. + @retval EFI_PROTOCOL_ERROR Malformed fw_cfg file name(s) have been found in WritePointer. Or, the WritePointer command references a file unknown to Tracker or the @@ -369,13 +374,21 @@ ProcessCmdAddChecksum ( does not fit in the given pointer size. @retval EFI_SUCCESS The pointer object inside the writeable fw_cfg - file has been written. + file has been written. If S3Context is not NULL, + then WritePointer has been condensed into + S3Context. + + @return Error codes propagated from + SaveCondensedWritePointerToS3Context(). The + pointer object inside the writeable fw_cfg file + has not been written. **/ STATIC EFI_STATUS ProcessCmdWritePointer ( IN CONST QEMU_LOADER_WRITE_POINTER *WritePointer, - IN CONST ORDERED_COLLECTION *Tracker + IN CONST ORDERED_COLLECTION *Tracker, + IN OUT S3_CONTEXT *S3Context OPTIONAL ) { RETURN_STATUS Status; @@ -432,6 +445,25 @@ ProcessCmdWritePointer ( return EFI_PROTOCOL_ERROR; } + // + // If S3 is enabled, we have to capture the below fw_cfg actions in condensed + // form, to be replayed during S3 resume. + // + if (S3Context != NULL) { + EFI_STATUS SaveStatus; + + SaveStatus = SaveCondensedWritePointerToS3Context ( + S3Context, + (UINT16)PointerItem, + WritePointer->PointerSize, + WritePointer->PointerOffset, + PointerValue + ); + if (EFI_ERROR (SaveStatus)) { + return SaveStatus; + } + } + QemuFwCfgSelectItem (PointerItem); QemuFwCfgSkipBytes (WritePointer->PointerOffset); QemuFwCfgWriteBytes (WritePointer->PointerSize, &PointerValue); @@ -701,6 +733,7 @@ InstallQemuFwCfgTables ( CONST QEMU_LOADER_ENTRY *WritePointerSubsetEnd; ORIGINAL_ATTRIBUTES *OriginalPciAttributes; UINTN OriginalPciAttributesCount; + S3_CONTEXT *S3Context; ORDERED_COLLECTION *Tracker; UINTN *InstalledKey; INT32 Installed; @@ -726,10 +759,22 @@ InstallQemuFwCfgTables ( RestorePciDecoding (OriginalPciAttributes, OriginalPciAttributesCount); LoaderEnd = LoaderStart + FwCfgSize / sizeof *LoaderEntry; + S3Context = NULL; + if (QemuFwCfgS3Enabled ()) { + // + // Size the allocation pessimistically, assuming that all commands in the + // script are QEMU_LOADER_WRITE_POINTER commands. + // + Status = AllocateS3Context (&S3Context, LoaderEnd - LoaderStart); + if (EFI_ERROR (Status)) { + goto FreeLoader; + } + } + Tracker = OrderedCollectionInit (BlobCompare, BlobKeyCompare); if (Tracker == NULL) { Status = EFI_OUT_OF_RESOURCES; - goto FreeLoader; + goto FreeS3Context; } // @@ -758,7 +803,7 @@ InstallQemuFwCfgTables ( case QemuLoaderCmdWritePointer: Status = ProcessCmdWritePointer (&LoaderEntry->Command.WritePointer, - Tracker); + Tracker, S3Context); if (!EFI_ERROR (Status)) { WritePointerSubsetEnd = LoaderEntry + 1; } @@ -790,11 +835,21 @@ InstallQemuFwCfgTables ( Status = Process2ndPassCmdAddPointer (&LoaderEntry->Command.AddPointer, Tracker, AcpiProtocol, InstalledKey, &Installed); if (EFI_ERROR (Status)) { - break; + goto UninstallAcpiTables; } } } + // + // Translating the condensed QEMU_LOADER_WRITE_POINTER commands to ACPI S3 + // Boot Script opcodes has to be the last operation in this function, because + // if it succeeds, it cannot be undone. + // + if (S3Context != NULL) { + Status = TransferS3ContextToBootScript (S3Context); + } + +UninstallAcpiTables: if (EFI_ERROR (Status)) { // // roll back partial installation @@ -847,6 +902,11 @@ RollbackWritePointersAndFreeTracker: } OrderedCollectionUninit (Tracker); +FreeS3Context: + if (S3Context != NULL) { + ReleaseS3Context (S3Context); + } + FreeLoader: FreePool (LoaderStart); diff --git a/OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf b/OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf index d99f2d5a95..e550ff5a47 100644 --- a/OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf +++ b/OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf @@ -31,6 +31,7 @@ QemuFwCfgAcpi.c EntryPoint.c PciDecoding.c + BootScript.c [Packages] MdePkg/MdePkg.dec @@ -49,6 +50,7 @@ [Protocols] gEfiAcpiTableProtocolGuid # PROTOCOL ALWAYS_CONSUMED gEfiPciIoProtocolGuid # PROTOCOL SOMETIMES_CONSUMED + gEfiS3SaveStateProtocolGuid # PROTOCOL SOMETIMES_CONSUMED [Guids] gRootBridgesConnectedEventGroupGuid -- 2.39.2