From e06253ba80d93bceaefc182ca882e07b0463be8d Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Wed, 23 Nov 2016 21:36:22 +0800 Subject: [PATCH] EmbeddedPkg/MmcDxe: set I/O speed and bus width in SD stack Add more SD commands to support 4-bit bus width & iospeed. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Haojian Zhuang Tested-by: Ryan Harkin Reviewed-by: Ard Biesheuvel --- EmbeddedPkg/Universal/MmcDxe/Mmc.h | 16 +++ .../Universal/MmcDxe/MmcIdentification.c | 106 ++++++++++++++++++ 2 files changed, 122 insertions(+) diff --git a/EmbeddedPkg/Universal/MmcDxe/Mmc.h b/EmbeddedPkg/Universal/MmcDxe/Mmc.h index fb3f6c9cba..c96ff2e12d 100644 --- a/EmbeddedPkg/Universal/MmcDxe/Mmc.h +++ b/EmbeddedPkg/Universal/MmcDxe/Mmc.h @@ -80,6 +80,22 @@ typedef struct { UINT32 PowerUp: 1; // This bit is set to LOW if the card has not finished the power up routine } OCR; +typedef struct { + UINT8 SD_SPEC: 4; // SD Memory Card - Spec. Version [59:56] + UINT8 SCR_STRUCTURE: 4; // SCR Structure [63:60] + UINT8 SD_BUS_WIDTHS: 4; // DAT Bus widths supported [51:48] + UINT8 DATA_STAT_AFTER_ERASE: 1; // Data Status after erases [55] + UINT8 SD_SECURITY: 3; // CPRM Security Support [54:52] + UINT8 EX_SECURITY_1: 1; // Extended Security Support [43] + UINT8 SD_SPEC4: 1; // Spec. Version 4.00 or higher [42] + UINT8 RESERVED_1: 2; // Reserved [41:40] + UINT8 SD_SPEC3: 1; // Spec. Version 3.00 or higher [47] + UINT8 EX_SECURITY_2: 3; // Extended Security Support [46:44] + UINT8 CMD_SUPPORT: 4; // Command Support bits [35:32] + UINT8 RESERVED_2: 4; // Reserved [39:36] + UINT32 RESERVED_3; // Manufacturer Usage [31:0] +} SCR; + typedef struct { UINT32 NOT_USED; // 1 [0:0] UINT32 CRC; // CRC7 checksum [7:1] diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c index decfd543cc..574a77e0fb 100644 --- a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c +++ b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c @@ -12,6 +12,9 @@ * **/ +#include +#include + #include "Mmc.h" typedef union { @@ -41,6 +44,11 @@ typedef union { #define EMMC_SWITCH_ERROR (1 << 7) +#define SD_BUS_WIDTH_1BIT (1 << 0) +#define SD_BUS_WIDTH_4BIT (1 << 2) + +#define SD_CCC_SWITCH (1 << 10) + #define DEVICE_STATE(x) (((x) >> 9) & 0xf) typedef enum _EMMC_DEVICE_STATE { EMMC_IDLE_STATE = 0, @@ -296,9 +304,12 @@ InitializeSdMmcDevice ( { UINT32 CmdArg; UINT32 Response[4]; + UINT32 Buffer[128]; UINTN BlockSize; UINTN CardSize; UINTN NumBlocks; + BOOLEAN CccSwitch; + SCR Scr; EFI_STATUS Status; EFI_MMC_HOST_PROTOCOL *MmcHost; @@ -319,6 +330,11 @@ InitializeSdMmcDevice ( return Status; } PrintCSD (Response); + if (MMC_CSD_GET_CCC(Response) & SD_CCC_SWITCH) { + CccSwitch = TRUE; + } else { + CccSwitch = FALSE; + } if (MmcHostInstance->CardInfo.CardType == SD_CARD_2_HIGH) { CardSize = HC_MMC_CSD_GET_DEVICESIZE (Response); @@ -349,6 +365,96 @@ InitializeSdMmcDevice ( return Status; } + Status = MmcHost->SendCommand (MmcHost, MMC_CMD55, CmdArg); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_ERROR, "%a(MMC_CMD55): Error and Status = %r\n", Status)); + return Status; + } + Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_ERROR, "%a(MMC_CMD55): Error and Status = %r\n", Status)); + return Status; + } + if ((Response[0] & MMC_STATUS_APP_CMD) == 0) { + return EFI_SUCCESS; + } + + /* SCR */ + Status = MmcHost->SendCommand (MmcHost, MMC_ACMD51, 0); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_ERROR, "%a(MMC_ACMD51): Error and Status = %r\n", __func__, Status)); + return Status; + } else { + Status = MmcHost->ReadBlockData (MmcHost, 0, 8, Buffer); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_ERROR, "%a(MMC_ACMD51): ReadBlockData Error and Status = %r\n", __func__, Status)); + return Status; + } + CopyMem (&Scr, Buffer, 8); + if (Scr.SD_SPEC == 2) { + if (Scr.SD_SPEC3 == 1) { + if (Scr.SD_SPEC4 == 1) { + DEBUG ((EFI_D_INFO, "Found SD Card for Spec Version 4.xx\n")); + } else { + DEBUG ((EFI_D_INFO, "Found SD Card for Spec Version 3.0x\n")); + } + } else { + if (Scr.SD_SPEC4 == 0) { + DEBUG ((EFI_D_INFO, "Found SD Card for Spec Version 2.0\n")); + } else { + DEBUG ((EFI_D_ERROR, "Found invalid SD Card\n")); + } + } + } else { + if ((Scr.SD_SPEC3 == 0) && (Scr.SD_SPEC4 == 0)) { + if (Scr.SD_SPEC == 1) { + DEBUG ((EFI_D_INFO, "Found SD Card for Spec Version 1.10\n")); + } else { + DEBUG ((EFI_D_INFO, "Found SD Card for Spec Version 1.0\n")); + } + } else { + DEBUG ((EFI_D_ERROR, "Found invalid SD Card\n")); + } + } + } + if (CccSwitch) { + /* SD Switch, Mode:1, Group:0, Value:1 */ + CmdArg = 1 << 31 | 0x00FFFFFF; + CmdArg &= ~(0xF << (0 * 4)); + CmdArg |= 1 << (0 * 4); + Status = MmcHost->SendCommand (MmcHost, MMC_CMD6, CmdArg); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_ERROR, "%a(MMC_CMD6): Error and Status = %r\n", Status)); + return Status; + } else { + Status = MmcHost->ReadBlockData (MmcHost, 0, 64, Buffer); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_ERROR, "%a(MMC_CMD6): ReadBlockData Error and Status = %r\n", Status)); + return Status; + } + } + } + if (Scr.SD_BUS_WIDTHS & SD_BUS_WIDTH_4BIT) { + CmdArg = MmcHostInstance->CardInfo.RCA << 16; + Status = MmcHost->SendCommand (MmcHost, MMC_CMD55, CmdArg); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_ERROR, "%a(MMC_CMD55): Error and Status = %r\n", Status)); + return Status; + } + /* Width: 4 */ + Status = MmcHost->SendCommand (MmcHost, MMC_CMD6, 2); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_ERROR, "%a(MMC_CMD6): Error and Status = %r\n", Status)); + return Status; + } + } + if (MMC_HOST_HAS_SETIOS(MmcHost)) { + Status = MmcHost->SetIos (MmcHost, 26 * 1000 * 1000, 4, EMMCBACKWARD); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_ERROR, "%a(SetIos): Error and Status = %r\n", Status)); + return Status; + } + } return EFI_SUCCESS; } -- 2.39.2