#!/bin/sh
#
# This is a "library" of sorts for use by the other FRR shell scripts.  It
# has most of the daemon start/stop logic, but expects the following shell
# functions/commands to be provided by the "calling" script:
#
#   log_success_msg
#   log_warning_msg
#   log_failure_msg
#
# (coincidentally, these are LSB standard functions.)
#
# Sourcing this file in a shell script will load FRR config variables but
# not perform any action.  Note there is an "exit 1" if the main config
# file does not exist.
#
# This script should be installed in  @CFG_SBIN@/frrcommon.sh

PATH=/bin:/usr/bin:/sbin:/usr/sbin
D_PATH="@CFG_SBIN@" # /usr/lib/frr
C_PATH="@CFG_SYSCONF@" # /etc/frr
V_PATH="@CFG_STATE@" # /var/run/frr
VTYSH="@vtysh_bin@" # /usr/bin/vtysh
FRR_USER="@enable_user@" # frr
FRR_GROUP="@enable_group@" # frr
FRR_VTY_GROUP="@enable_vty_group@" # frrvty

# ORDER MATTERS FOR $DAEMONS!
# - keep zebra first
# - watchfrr does NOT belong in this list

DAEMONS="zebra bgpd ripd ripngd ospfd ospf6d isisd babeld pimd ldpd nhrpd eigrpd sharpd pbrd staticd bfdd fabricd"
RELOAD_SCRIPT="$D_PATH/frr-reload.py"

#
# general helpers
#

debug() {
	[ -n "$watchfrr_debug" ] || return 0

	printf '%s %s(%s):' "`date +%Y-%m-%dT%H:%M:%S.%N`" "$0" $$ >&2
	# this is to show how arguments are split regarding whitespace & co.
	# (e.g. for use with `debug "message" "$@"`)
	while [ $# -gt 0 ]; do
		printf ' "%s"' "$1" >&2
		shift
	done
	printf '\n' >&2
}

chownfrr() {
	[ -n "$FRR_USER" ] && chown "$FRR_USER" "$1"
	[ -n "$FRR_GROUP" ] && chgrp "$FRR_GROUP" "$1"
}

vtysh_b () {
	[ "$1" = "watchfrr" ] && return 0
	[ -r "$C_PATH/frr.conf" ] || return 0
	if [ -n "$1" ]; then
		"$VTYSH" -b -n -d "$1"
	else
		"$VTYSH" -b -n
	fi
}

daemon_inst() {
	# note this sets global variables ($dmninst, $daemon, $inst)
	dmninst="$1"
	daemon="${dmninst%:*}"
	inst=""
	[ "$daemon" != "$dmninst" ] && inst="${dmninst#*:}"
}

daemon_list() {
	# note $1 and $2 specify names for global variables to be set
	local enabled disabled evar dvar
	enabled=""
	disabled=""
	evar="$1"
	dvar="$2"

	for daemon in $DAEMONS; do
		eval cfg=\$$daemon
		eval inst=\$${daemon}_instances
		[ "$daemon" = zebra ] && cfg=yes
		if [ -n "$cfg" -a "$cfg" != "no" -a "$cfg" != "0" ]; then
			debug "$daemon enabled"
			enabled="$enabled $daemon"
			if [ -n "$inst" ]; then
				debug "$daemon multi-instance $inst"
				for i in $inst; do
					enabled="$enabled $daemon:$inst"
				done
			fi
		else
			debug "$daemon disabled"
			disabled="$disabled $daemon"
		fi
	done

	enabled="${enabled# }"
	disabled="${disabled# }"
	[ -z "$evar" ] && echo "$enabled"
	[ -n "$evar" ] && eval $evar="\"$enabled\""
	[ -n "$dvar" ] && eval $dvar="\"$disabled\""
}

#
# individual daemon management
#

daemon_prep() {
	local daemon inst cfg
	daemon="$1"
	inst="$2"
	[ "$daemon" = "watchfrr" ] && return 0
	[ -x "$D_PATH/$daemon" ] || {
		log_failure_msg "cannot start $daemon${inst:+ (instance $inst)}: daemon binary not installed\n"
		return 1
	}
	[ -r "$C_PATH/frr.conf" ] && return 0

	cfg="$C_PATH/$daemon${inst:+-$inst}.conf"
	if [ ! -r "$cfg" ]; then
		touch "$cfg"
		chownfrr "$cfg"
	fi
	return 0
}

daemon_start() {
	local dmninst daemon inst args instopt wrap bin
	daemon_inst "$1"

	ulimit -n $MAX_FDS > /dev/null 2> /dev/null
	daemon_prep "$daemon" "$inst" || return 1

	eval wrap="\$${daemon}_wrap"
	bin="$D_PATH/$daemon"
	instopt="${inst:+-n $inst}"
	eval args="\$${daemon}_options"

	if eval "$all_wrap $wrap $bin -d $instopt $args"; then
		log_success_msg "Started $dmninst"
		vtysh_b "$daemon"
	else
		log_failure_msg "Failed to start $dmninst!"
	fi
}

daemon_stop() {
	local dmninst daemon inst pidfile vtyfile pid cnt fail
	daemon_inst "$1"

	pidfile="$V_PATH/$daemon${inst:+-$inst}.pid"
	vtyfile="$V_PATH/$daemon${inst:+-$inst}.vty"

	[ -r "$pidfile" ] || fail="pid file not found"
	[ -z "$fail" ] && pid="`cat \"$pidfile\"`"
	[ -z "$fail" -a -z "$pid" ] && fail="pid file is empty"
	[ -n "$fail" ] || kill -0 "$pid" 2>/dev/null || fail="pid $pid not running"

	if [ -n "$fail" ]; then
		log_failure_msg "Cannot stop $dmninst: $fail"
		return 1
	fi

	debug "kill -2 $pid"
	kill -2 "$pid"
	cnt=1200
	while kill -0 "$pid" 2>/dev/null; do
		sleep .1
		[ $(( cnt -= 1 )) -gt 0 ] || break
	done
	if kill -0 "$pid" 2>/dev/null; then
		log_failure_msg "Failed to stop $dmninst, pid $pid still running"
		still_running=1
		return 1
	else
		log_success_msg "Stopped $dmninst"
		rm -f "$pidfile"
		return 0
	fi
}

daemon_status() {
	local dmninst daemon inst pidfile pid fail
	daemon_inst "$1"

	pidfile="$V_PATH/$daemon${inst:+-$inst}.pid"

	[ -r "$pidfile" ] || return 3
	pid="`cat \"$pidfile\"`"
	[ -z "$pid" ] && return 1
	kill -0 "$pid" 2>/dev/null || return 1
	return 0
}

print_status() {
	daemon_status "$1"
	rv=$?
	if [ "$rv" -eq 0 ]; then
		log_success_msg "Status of $1: running"
	else
		log_failure_msg "Status of $1: FAILED"
	fi
	return $rv
}

#
# all-daemon commands
#

all_start() {
	daemon_list daemons
	for dmninst in $daemons; do
		daemon_start "$dmninst"
	done
}

all_stop() {
	local pids reversed

	daemon_list daemons disabled
	[ "$1" = "--reallyall" ] && daemons="$daemons $disabled"

	reversed=""
	for dmninst in $daemons; do
		reversed="$dmninst $reversed"
	done

	for dmninst in $reversed; do
		daemon_stop "$dmninst" &
		pids="$pids $!"
	done
	for pid in $pids; do
		wait $pid
	done
}

all_status() {
	local fail

	daemon_list daemons
	fail=0
	for dmninst in $daemons; do
		print_status "$dmninst" || fail=1
	done
	return $fail
}

#
# config sourcing
#

load_old_config() {
	oldcfg="$1"
	[ -r "$oldcfg" ] || return 0
	[ -s "$oldcfg" ] || return 0
	grep -v '^[[:blank:]]*\(#\|$\)' "$oldcfg" > /dev/null || return 0

	log_warning_msg "Reading deprecated $oldcfg.  Please move its settings to $C_PATH/daemons and remove it."

	# save off settings from daemons for the OR below
	for dmn in $DAEMONS; do eval "_new_$dmn=\${$dmn:-no}"; done

	. "$oldcfg"

	# OR together the daemon enabling options between config files
	for dmn in $DAEMONS; do eval "test \$_new_$dmn != no && $dmn=\$_new_$dmn; unset _new_$dmn"; done
}

[ -r "$C_PATH/daemons" ] || {
	log_failure_msg "cannot run $@: $C_PATH/daemons does not exist\n"
	exit 1
}
. "$C_PATH/daemons"

load_old_config "$C_PATH/daemons.conf"
load_old_config "/etc/default/frr"
load_old_config "/etc/sysconfig/frr"

#
# other defaults and dispatch
#

frrcommon_main() {
	local cmd

	debug "frrcommon_main" "$@"

	cmd="$1"
	shift

	if [ "$1" = "all" -o -z "$1" ]; then
		case "$cmd" in
		start)	all_start;;
		stop)	all_stop;;
		restart)
			all_stop
			all_start
			;;
		*)	$cmd "$@";;
		esac
	else
		case "$cmd" in
		start)	daemon_start "$@";;
		stop)	daemon_stop "$@";;
		restart)
			daemon_stop "$@"
			daemon_start "$@"
			;;
		*)	$cmd "$@";;
		esac
	fi
}