#! /bin/sh # smartmontools init file for smartd # Copyright (C) 2002-8 Bruce Allen # $Id: smartd.initd.in 3727 2012-12-13 17:23:06Z samm2 $ # For RedHat and cousins: # chkconfig: 2345 40 40 # description: Self Monitoring and Reporting Technology (SMART) Daemon # processname: smartd # For SuSE and cousins ### BEGIN INIT INFO # Provides: smartd # Required-Start: $syslog $remote_fs # Should-Start: sendmail # Required-Stop: $syslog $remote_fs # Should-Stop: sendmail # Default-Start: 2 3 5 # Default-Stop: # Short-Description: Monitors disk and tape health via S.M.A.R.T. # Description: Start S.M.A.R.T. disk and tape monitor. ### END INIT INFO # This program is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by the Free # Software Foundation; either version 2, or (at your option) any later # version. # You should have received a copy of the GNU General Public License (for # example COPYING); if not, write to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. # This code was originally developed as a Senior Thesis by Michael Cornwell # at the Concurrent Systems Laboratory (now part of the Storage Systems # Research Center), Jack Baskin School of Engineering, University of # California, Santa Cruz. http://ssrc.soe.ucsc.edu/. # Uncomment the line below to pass options to smartd on startup. # Note that distribution specific configuration files like # /etc/{default,sysconfig}/smartmontools might override these #smartd_opts="--interval=1800" SMARTD_BIN=/usr/local/sbin/smartd report_unsupported () { echo "Currently the smartmontools package has no init script for" echo "the $1 OS/distribution. If you can provide one or this" echo "one works after removing some ifdefs, please contact" echo "smartmontools-support@lists.sourceforge.net." exit 1 } # Red Hat or Yellow Dog or Mandrake if [ -f /etc/redhat-release -o -f /etc/yellowdog-release -o -f /etc/mandrake-release -o -f /etc/whitebox-release -o -f /etc/trustix-release -o -f /etc/tinysofa-release ] ; then # Source function library . /etc/rc.d/init.d/functions # Source configuration file. This should define the shell variable smartd_opts [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools RETVAL=0 prog=smartd pidfile=/var/lock/subsys/smartd config=/etc/smartd.conf start() { [ $UID -eq 0 ] || exit 4 [ -x $SMARTD_BIN ] || exit 5 [ -f $config ] || exit 6 echo -n $"Starting $prog: " daemon $SMARTD_BIN $smartd_opts RETVAL=$? echo [ $RETVAL = 0 ] && touch $pidfile return $RETVAL } stop() { [ $UID -eq 0 ] || exit 4 echo -n $"Shutting down $prog: " killproc $SMARTD_BIN RETVAL=$? echo rm -f $pidfile return $RETVAL } reload() { echo -n $"Reloading $prog daemon configuration: " killproc $SMARTD_BIN -HUP RETVAL=$? echo return $RETVAL } report() { echo -n $"Checking SMART devices now: " killproc $SMARTD_BIN -USR1 RETVAL=$? echo return $RETVAL } case "$1" in start) start ;; stop) stop ;; reload) reload ;; report) report ;; restart) stop start ;; condrestart|try-restart) if [ -f $pidfile ]; then stop start fi ;; force-reload) reload || (stop; start) ;; status) status $prog RETVAL=$? ;; *) echo $"Usage: $0 {start|stop|restart|status|condrestart|try-restart|reload|force-reload|report}" RETVAL=2 [ "$1" = 'usage' ] && RETVAL=0 esac exit $RETVAL # Slackware elif [ -f /etc/slackware-version ] ; then # Source configuration file. This should define the shell variable smartd_opts. # Email smartmontools-support@lists.sourceforge.net if there is a better choice # of path for Slackware. [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools RETVAL=0 case "$1" in start) echo -n "Starting smartd: " $SMARTD_BIN $smartd_opts RETVAL=$? echo ;; stop) echo -n "Shutting down smartd: " killall $SMARTD_BIN RETVAL=$? echo ;; restart) $0 stop sleep 1 $0 start RETVAL=$? ;; try-restart) if pidof $SMARTD_BIN >/dev/null; then $0 restart RETVAL=$? fi ;; force-reload) $0 reload || $0 restart RETVAL=$? ;; reload) echo -n "Reloading smartd configuration: " killall -s HUP $SMARTD_BIN RETVAL=$? echo ;; report) echo -n "Checking SMART devices now: " killall -s USR1 $SMARTD_BIN RETVAL=$? echo ;; status) if pidof $SMARTD_BIN >/dev/null; then echo "$SMARTD_BIN is running." else echo "$SMARTD_BIN is not running." RETVAL=1 fi ;; *) echo "Usage: $0 {start|stop|restart|try-restart|force-reload|reload|report|status}" RETVAL=1 esac exit $RETVAL # SuSE elif [ -f /etc/SuSE-release ] ; then test -x $SMARTD_BIN || exit 5 # Existence of config file is optional SMARTD_CONFIG=/etc/smartd.conf # source configuration file. [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools smartd_opts= if test -n "$SMARTD_CHECK_INTERVAL" -a "$SMARTD_CHECK_INTERVAL" != 1800 ; then smartd_opts=" -i $SMARTD_CHECK_INTERVAL" fi if test -n "$SMARTD_LOG_FACILITY" -a "$SMARTD_LOG_FACILITY" != "daemon" ; then smartd_opts="$smartd_opts -l $SMARTD_LOG_FACILITY" fi if test -n "$SMARTD_DRIVEDB" ; then smartd_opts="$smartd_opts -B $SMARTD_DRIVEDB" fi if test "$SMARTD_SAVESTATES" = "no" ; then smartd_opts="$smartd_opts -s \"\"" fi if test "$SMARTD_ATTRLOG" = "no" ; then smartd_opts="$smartd_opts -A \"\"" fi if test -n "$SMARTD_EXTRA_OPTS" ; then smartd_opts="$smartd_opts $SMARTD_EXTRA_OPTS" fi # Shell functions sourced from /etc/rc.status: # rc_check check and set local and overall rc status # rc_status check and set local and overall rc status # rc_status -v be verbose in local rc status and clear it afterwards # rc_status -v -r ditto and clear both the local and overall rc status # rc_status -s display "skipped" and exit with status 3 # rc_status -u display "unused" and exit with status 3 # rc_failed set local and overall rc status to failed # rc_failed set local and overall rc status to # rc_reset clear both the local and overall rc status # rc_exit exit appropriate to overall rc status # rc_active checks whether a service is activated by symlinks . /etc/rc.status # Reset status of this service rc_reset # Return values acc. to LSB for all commands but status: # 0 - success # 1 - generic or unspecified error # 2 - invalid or excess argument(s) # 3 - unimplemented feature (e.g. "reload") # 4 - user had insufficient privileges # 5 - program is not installed # 6 - program is not configured # 7 - program is not running # 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl) # # Note that starting an already running service, stopping # or restarting a not-running service as well as the restart # with force-reload (in case signaling is not supported) are # considered a success. case "$1" in start) echo -n "Starting smartd " ## Start daemon with startproc(8). If this fails ## the return value is set appropriately by startproc. # We don't use startproc - we need to check for return code 17. if ! /sbin/checkproc $SMARTD_BIN ; then eval $SMARTD_BIN$smartd_opts # Remember status and be verbose if test $? -ne 17 ; then rc_status -v else rc_status -u fi else rc_reset rc_status -v fi ;; stop) echo -n "Shutting down smartd " /sbin/killproc -TERM $SMARTD_BIN # Remember status and be verbose rc_status -v ;; try-restart) ## Do a restart only if the service was active before. ## Note: try-restart is now part of LSB (as of 1.9). $0 status if test $? = 0; then $0 restart else rc_reset # Not running is not a failure. fi # Remember status and be quiet rc_status ;; restart) $0 stop $0 start # Remember status and be quiet rc_status ;; force-reload|reload) echo -n "Reload service smartd " /sbin/killproc -HUP $SMARTD_BIN rc_status -v ;; report) ## Checking SMART devices now (smartd specific function) echo -n "Checking SMART devices now " /sbin/killproc -USR1 $SMARTD_BIN rc_status -v ;; status) echo -n "Checking for service smartd " ## Check status with checkproc(8), if process is running ## checkproc will return with exit status 0. # Return value is slightly different for the status command: # 0 - service up and running # 1 - service dead, but /var/run/ pid file exists # 2 - service dead, but /var/lock/ lock file exists # 3 - service not running (unused) # 4 - service status unknown :-( # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.) # NOTE: checkproc returns LSB compliant status values. /sbin/checkproc $SMARTD_BIN rc_status -v ;; probe) ## Optional: Probe for the necessity of a reload, print out the ## argument to this init script which is required for a reload. ## Note: probe is not (yet) part of LSB (as of 1.9) test $SMARTD_CONFIG -nt /var/run/smartd.pid && echo reload ;; *) echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|report|probe}" exit 1 esac rc_exit # Debian case elif [ -f /etc/debian_version ] ; then PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin SMARTDPID=/var/run/smartd.pid [ -x $SMARTD_BIN ] || exit 0 RET=0 # source configuration file [ -r /etc/default/rcS ] && . /etc/default/rcS [ -r /etc/default/smartmontools ] && . /etc/default/smartmontools smartd_opts="--pidfile $SMARTDPID $smartd_opts" case "$1" in start) echo -n "Starting S.M.A.R.T. daemon: smartd" if start-stop-daemon --start --quiet --pidfile $SMARTDPID \ --exec $SMARTD_BIN -- $smartd_opts; then echo "." else echo " (failed)" RET=1 fi ;; stop) echo -n "Stopping S.M.A.R.T. daemon: smartd" start-stop-daemon --stop --quiet --oknodo --pidfile $SMARTDPID echo "." ;; restart) $0 stop $0 start ;; force-reload) $0 reload || $0 restart ;; reload) echo -n "Reload S.M.A.R.T. daemon: smartd" if start-stop-daemon --stop --quiet --signal 1 \ --pidfile $SMARTDPID; then echo "." else echo " (failed)" RET=1 fi ;; report) echo -n "Checking SMART devices now" if start-stop-daemon --stop --quiet --signal 10 \ --pidfile $SMARTDPID; then echo "." else echo " (failed)" RET=1 fi ;; status) if pidof $SMARTD_BIN >/dev/null; then echo "$SMARTD_BIN is running." else echo "$SMARTD_BIN is not running." RET=1 fi ;; *) echo "Usage: $0 {start|stop|restart|force-reload|reload|report|status}" exit 1 esac exit $RET elif [ -f /etc/gentoo-release ] ; then report_unsupported "Gentoo" elif [ -f /etc/turbolinux-release ] ; then report_unsupported "Turbolinux" elif [ -f /etc/environment.corel ] ; then report_unsupported "Corel" # PLEASE ADD OTHER LINUX DISTRIBUTIONS JUST BEFORE THIS LINE, USING elif elif uname -a | grep FreeBSD > /dev/null 2>&1 ; then # following is replaced by port install PREFIX=@@PREFIX@@ # Updated to try both the RCNG version of things from 5.x, or fallback to # oldfashioned rc.conf if [ -r /etc/rc.subr ]; then # This is RC-NG, pick up our values . /etc/rc.subr name="smartd" rcvar="smartd_enable" command="$SMARTD_BIN" load_rc_config $name elif [ -r /etc/defaults/rc.conf ]; then # Not a 5.x system, try the default location for variables . /etc/defaults/rc.conf source_rc_confs elif [ -r /etc/rc.conf ]; then # Worst case, fallback to system config file . /etc/rc.conf fi if [ -r /etc/rc.subr ]; then # Use new functionality from RC-NG run_rc_command "$1" else PID_FILE=/var/run/smartd.pid case "$1" in start) $SMARTD_BIN -p $PID_FILE $smartd_flags echo -n " smartd" ;; stop) kill `cat $PID_FILE` echo -n " smartd" ;; restart) $0 stop sleep 1 $0 start ;; reload) kill -s HUP `cat $PID_FILE` ;; report) kill -s USR1 `cat $PID_FILE` ;; *) echo "Usage: $0 {start|stop|restart|reload|report}" exit 1 esac exit 0 fi elif uname -a | grep SunOS > /dev/null 2>&1 ; then # Source configuration file. This should define the shell variable smartd_opts. # Email smartmontools-support@lists.sourceforge.net if there is a better choice # of path for Solaris [ -r /etc/default/smartmontools ] && . /etc/default/smartmontools PID_FILE=/var/run/smartd.pid case "$1" in start) $SMARTD_BIN -p $PID_FILE $smartd_opts echo -n "smartd " ;; stop) [ -f $PID_FILE ] && kill `cat $PID_FILE` echo -n "smartd " ;; restart) $0 stop sleep 1 $0 start ;; reload) kill -s HUP `cat $PID_FILE` ;; report) kill -s USR1 `cat $PID_FILE` ;; *) echo "Usage: $0 {start|stop|restart|reload|report}" exit 1 esac exit 0 # Cygwin elif uname | grep -i CYGWIN > /dev/null 2>&1 ; then # The following settings may be changed by the configuration file below # Service Name (must be unique) smartd_svcname=smartd # Service display name smartd_svcdisp="CYGWIN smartd" # Service description smartd_svcdesc="\ Controls and monitors storage devices using the Self-Monitoring \ Analysis and Reporting Technology System (S.M.A.R.T.) \ built into ATA and SCSI Hard Drives. \ http://smartmontools.sourceforge.net/" # Source configuration file. This should define the shell variable smartd_opts. # Email smartmontools-support@lists.sourceforge.net if there is a better choice # of path for Cygwin [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools PID_FILE=/var/run/smartd.pid RETVAL=0 # Note: "[ -r $PID_FILE ]" is not used here. On Cygwin, this command may # return success even if the file is present but cannot be read by current user. # If smartd is running as service, smartd.pid is owned by local system account # which is different from any user ever executing this script. case "$1" in start) if cygrunsrv -L 2>/dev/null | grep "^${smartd_svcname}$" >/dev/null 2>&1; then echo -n "Starting service $smartd_svcname: " cygrunsrv -S "$smartd_svcname" else echo -n "Starting smartd as daemon: " $SMARTD_BIN -p $PID_FILE $smartd_opts fi RETVAL=$? ;; stop) echo -n "Shutting down smartd: " pid="`cat $PID_FILE 2>/dev/null`" && kill "$pid" RETVAL=$? ;; reload) echo -n "Reloading smartd configuration: " pid="`cat $PID_FILE 2>/dev/null`" && kill -HUP "$pid" RETVAL=$? ;; report) echo -n "Checking SMART devices now: " pid="`cat $PID_FILE 2>/dev/null`" && kill -USR1 "$pid" RETVAL=$? ;; restart) $0 stop sleep 1 $0 start exit $? ;; install) shift [ $# -eq 0 ] || smartd_opts="$*" dep=; dep2= if cygrunsrv -L 2>/dev/null | grep "^syslogd$" >/dev/null 2>&1; then dep="syslogd" fi if cygrunsrv -L 2>/dev/null | grep "^syslog-ng" >/dev/null 2>&1; then dep2="syslog-ng" fi if [ -z "$dep" ]; then if [ -z "$dep2" ]; then echo "Warning: no syslog service installed, smartd will write to windows event log."; else dep="$dep2" fi else if [ -z "$dep2" ]; then : else dep= echo "Warning: both syslogd and syslog-ng installed, dependency not set." fi fi echo "Installing service ${smartd_svcname}${dep:+ (depending on '$dep')}${smartd_opts:+ with options '$smartd_opts'}:" cygrunsrv -I "$smartd_svcname" -d "$smartd_svcdisp" -f "$smartd_svcdesc" ${dep:+-y} $dep \ -e CYGWIN="$CYGWIN" -p $SMARTD_BIN -a "-n -p ${PID_FILE}${smartd_opts:+ }$smartd_opts" RETVAL=$? ;; remove) echo "Removing service $smartd_svcname:" cygrunsrv -R "$smartd_svcname" RETVAL=$? ;; status) echo -n "Checking smartd status: " if cygrunsrv -L 2>/dev/null | grep "^${smartd_svcname}$" >/dev/null 2>&1; then if cygrunsrv -Q "$smartd_svcname" 2>/dev/null | grep "State *: Running" >/dev/null 2>&1; then echo "running as service '$smartd_svcname'." elif ps -e 2>/dev/null | grep " ${SMARTD_BIN}$" >/dev/null 2>&1; then echo "installed as service '$smartd_svcname' but running as daemon." else echo "installed as service '$smartd_svcname' but not running." RETVAL=1 fi elif ps -e 2>/dev/null | grep " ${SMARTD_BIN}$" >/dev/null 2>&1; then echo "running as daemon." else echo "not running." RETVAL=1 fi exit $RETVAL ;; *) echo "Usage: $0 {start|stop|restart|reload|report|status}" echo " $0 {install [options]|remove}" exit 1 esac if [ "$RETVAL" -eq 0 ]; then echo "done"; else echo "ERROR"; fi exit $RETVAL # Add other OSes HERE, using elif... else report_unsupported "Unknown" fi # One should NEVER arrive here, except for a badly written case above, # that fails to exit. echo "SOMETHING IS WRONG WITH THE SMARTD STARTUP SCRIPT" echo "PLEASE CONTACT smartmontools-support@lists.sourceforge.net" exit 1