start 3.0 development
[pve-common.git] / debian / changelog
1 libpve-common-perl (3.0-1) unstable; urgency=low
2
3 * start 3.0 development
4
5 -- Proxmox Support Team <support@proxmox.com> Tue, 05 Mar 2013 11:43:46 +0100
6
7 libpve-common-perl (1.0-48) unstable; urgency=low
8
9 * depend on libnet-ip-perl
10
11 * Improved ipv4 addresses validation
12
13 -- Proxmox Support Team <support@proxmox.com> Mon, 25 Feb 2013 06:20:10 +0100
14
15 libpve-common-perl (1.0-47) unstable; urgency=low
16
17 * fix bug #335: correctly verify ipv4 network masks
18
19 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Feb 2013 09:13:35 +0100
20
21 libpve-common-perl (1.0-46) unstable; urgency=low
22
23 * revert vlan changes
24
25 * add parser for /etc/iscsi/initiatorname.iscsi
26
27 -- Proxmox Support Team <support@proxmox.com> Wed, 13 Feb 2013 10:57:20 +0100
28
29 libpve-common-perl (1.0-45) unstable; urgency=low
30
31 * read_meminfo: query KSM page sharing
32
33 * revert tc rate filter changes: they do not work as expected
34
35 -- Proxmox Support Team <support@proxmox.com> Fri, 01 Feb 2013 09:04:27 +0100
36
37 libpve-common-perl (1.0-44) unstable; urgency=low
38
39 * vlan changes: use ip command instead of old vconfig, activate gvrp
40 by default, use bridge instead of raw ethernet device as vlan bridge
41
42 -- Proxmox Support Team <support@proxmox.com> Mon, 28 Jan 2013 11:57:33 +0100
43
44 libpve-common-perl (1.0-43) unstable; urgency=low
45
46 * tc: use rate filter with mtu 64k (instead of avrate)
47
48 -- Proxmox Support Team <support@proxmox.com> Mon, 28 Jan 2013 06:59:32 +0100
49
50 libpve-common-perl (1.0-41) unstable; urgency=low
51
52 * correctly count physical sockets
53
54 -- Proxmox Support Team <support@proxmox.com> Mon, 31 Dec 2012 08:24:40 +0100
55
56 libpve-common-perl (1.0-40) unstable; urgency=low
57
58 * run_command: implement afterfork callback
59
60 -- Proxmox Support Team <support@proxmox.com> Mon, 10 Dec 2012 12:50:12 +0100
61
62 libpve-common-perl (1.0-39) unstable; urgency=low
63
64 * remove hardcoded blowfish cipher
65
66 -- Proxmox Support Team <support@proxmox.com> Wed, 31 Oct 2012 13:55:06 +0100
67
68 libpve-common-perl (1.0-38) unstable; urgency=low
69
70 * fix bug #273: retry flock if it fails with EINTR
71
72 -- Proxmox Support Team <support@proxmox.com> Wed, 31 Oct 2012 08:21:43 +0100
73
74 libpve-common-perl (1.0-37) unstable; urgency=low
75
76 * fix bug #264: use option pipefail for shell commands
77
78 -- Proxmox Support Team <support@proxmox.com> Mon, 29 Oct 2012 09:45:11 +0100
79
80 libpve-common-perl (1.0-36) unstable; urgency=low
81
82 * new helper wait_for_vnc_port()
83
84 -- Proxmox Support Team <support@proxmox.com> Wed, 24 Oct 2012 08:21:04 +0200
85
86 libpve-common-perl (1.0-35) unstable; urgency=low
87
88 * fix bug in read_memory_usage
89
90 -- Proxmox Support Team <support@proxmox.com> Mon, 15 Oct 2012 06:32:30 +0200
91
92 libpve-common-perl (1.0-34) unstable; urgency=low
93
94 * file_read_firstline: avoid warning with empty files
95
96 -- Proxmox Support Team <support@proxmox.com> Tue, 02 Oct 2012 08:05:10 +0200
97
98 libpve-common-perl (1.0-33) unstable; urgency=low
99
100 * fix run_command: restore umask correctly
101
102 -- Proxmox Support Team <support@proxmox.com> Wed, 26 Sep 2012 13:16:22 +0200
103
104 libpve-common-perl (1.0-32) unstable; urgency=low
105
106 * fix typo in error message
107
108 -- Proxmox Support Team <support@proxmox.com> Tue, 25 Sep 2012 06:08:02 +0200
109
110 libpve-common-perl (1.0-31) unstable; urgency=low
111
112 * minor fix: remove debug output
113
114 -- Proxmox Support Team <support@proxmox.com> Tue, 11 Sep 2012 09:22:13 +0200
115
116 libpve-common-perl (1.0-30) unstable; urgency=low
117
118 * allow more that 10 physical network interfaces
119
120 -- Proxmox Support Team <support@proxmox.com> Thu, 02 Aug 2012 07:28:17 +0200
121
122 libpve-common-perl (1.0-29) unstable; urgency=low
123
124 * AbsrtactMigrate: use rsync flags AX (preserve ACLs and xattr)
125
126 -- Proxmox Support Team <support@proxmox.com> Thu, 14 Jun 2012 09:08:11 +0200
127
128 libpve-common-perl (1.0-28) unstable; urgency=low
129
130 * added SectionConfig.pm, base class for Storage and Auth plugins.
131
132 -- Proxmox Support Team <support@proxmox.com> Wed, 16 May 2012 07:18:53 +0200
133
134 libpve-common-perl (1.0-27) unstable; urgency=low
135
136 * fix bug #172: use DNS compatible regex in upid parser
137
138 -- Proxmox Support Team <support@proxmox.com> Fri, 20 Apr 2012 08:31:44 +0200
139
140 libpve-common-perl (1.0-26) unstable; urgency=low
141
142 * add Turkish keyboard mappings
143
144 -- Proxmox Support Team <support@proxmox.com> Wed, 11 Apr 2012 08:35:13 +0200
145
146 libpve-common-perl (1.0-25) unstable; urgency=low
147
148 * fix bug #135: use DNS compatible naming for 'pve-node'
149
150 -- Proxmox Support Team <support@proxmox.com> Mon, 02 Apr 2012 14:10:45 +0200
151
152 libpve-common-perl (1.0-24) unstable; urgency=low
153
154 * fix bug #135: allow single letter 'dns-name', allow to start names
155 with numbers
156
157 -- Proxmox Support Team <support@proxmox.com> Mon, 02 Apr 2012 12:04:02 +0200
158
159 libpve-common-perl (1.0-23) unstable; urgency=low
160
161 * moved dir_glob_regex() and dir_glob_foreach() from PVE::Storage
162 to PVE::Tools
163
164 * add vlan setup code to PVE::Network
165
166 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Mar 2012 07:56:49 +0200
167
168 libpve-common-perl (1.0-22) unstable; urgency=low
169
170 * return number of sockets in read_cpuinfo
171
172 -- Proxmox Support Team <support@proxmox.com> Mon, 26 Mar 2012 07:53:35 +0200
173
174 libpve-common-perl (1.0-21) unstable; urgency=low
175
176 * use Digest::SHA instead of Digest::SHA1
177
178 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Mar 2012 11:21:02 +0100
179
180 libpve-common-perl (1.0-20) unstable; urgency=low
181
182 * fix bug #116, #103: try to keep ordering in /etc/network/interfaces
183
184 -- Proxmox Support Team <support@proxmox.com> Mon, 19 Mar 2012 13:30:07 +0100
185
186 libpve-common-perl (1.0-19) unstable; urgency=low
187
188 * add dns-name format
189
190 -- Proxmox Support Team <support@proxmox.com> Mon, 12 Mar 2012 12:31:27 +0100
191
192 libpve-common-perl (1.0-18) unstable; urgency=low
193
194 * try to keep ordering in /etc/network/interfaces
195
196 -- Proxmox Support Team <support@proxmox.com> Fri, 02 Mar 2012 12:33:34 +0100
197
198 libpve-common-perl (1.0-17) unstable; urgency=low
199
200 * better error message for usermod command
201
202 -- Proxmox Support Team <support@proxmox.com> Thu, 01 Mar 2012 12:42:30 +0100
203
204 libpve-common-perl (1.0-16) unstable; urgency=low
205
206 * try to keep comments in /etc/network/interfaces
207
208 -- Proxmox Support Team <support@proxmox.com> Thu, 01 Mar 2012 09:49:22 +0100
209
210 libpve-common-perl (1.0-15) unstable; urgency=low
211
212 * add Swedish keymap
213
214 -- Proxmox Support Team <support@proxmox.com> Mon, 27 Feb 2012 09:46:36 +0100
215
216 libpve-common-perl (1.0-14) unstable; urgency=low
217
218 * increase version to 1.0-14 for RC1
219
220 -- Proxmox Support Team <support@proxmox.com> Thu, 16 Feb 2012 15:12:15 +0100
221
222 libpve-common-perl (1.0-13) unstable; urgency=low
223
224 * correctly decode utf8 CLI parameters.
225
226 -- Proxmox Support Team <support@proxmox.com> Thu, 19 Jan 2012 14:04:03 +0100
227
228 libpve-common-perl (1.0-12) unstable; urgency=low
229
230 * new helper kvmkeymaplist()
231
232 * fix bug 77: only use cmd2string when necessary
233
234 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Jan 2012 11:44:11 +0100
235
236 libpve-common-perl (1.0-11) unstable; urgency=low
237
238 * new helper run_with_timeout()
239
240 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Dec 2011 11:25:01 +0100
241
242 libpve-common-perl (1.0-10) unstable; urgency=low
243
244 * add helpers to implement migration
245
246 -- Proxmox Support Team <support@proxmox.com> Thu, 08 Dec 2011 11:03:54 +0100
247
248 libpve-common-perl (1.0-9) unstable; urgency=low
249
250 * bug fixes for run_command()
251
252 -- Proxmox Support Team <support@proxmox.com> Fri, 02 Dec 2011 10:28:27 +0100
253
254 libpve-common-perl (1.0-8) unstable; urgency=low
255
256 * make cli argument parser more flexible
257
258 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Nov 2011 08:36:30 +0100
259
260 libpve-common-perl (1.0-7) unstable; urgency=low
261
262 * bug fixes (see git log)
263
264 -- Proxmox Support Team <support@proxmox.com> Wed, 09 Nov 2011 10:07:38 +0100
265
266 libpve-common-perl (1.0-6) unstable; urgency=low
267
268 * add PVE::Tools::random_ether_addr()
269
270 -- Proxmox Support Team <support@proxmox.com> Wed, 05 Oct 2011 09:19:39 +0200
271
272 libpve-common-perl (1.0-5) unstable; urgency=low
273
274 * cleanups (prepare for beta release)
275
276 -- Proxmox Support Team <support@proxmox.com> Thu, 11 Aug 2011 07:23:00 +0200
277
278 libpve-common-perl (1.0-4) unstable; urgency=low
279
280 * CLIHandler.pm: new command 'printmanpod' to generate manual pages.
281
282 -- Proxmox Support Team <support@proxmox.com> Wed, 10 Aug 2011 10:17:55 +0200
283
284 libpve-common-perl (1.0-3) unstable; urgency=low
285
286 * fix CLIHandler.pm
287
288 -- Proxmox Support Team <support@proxmox.com> Fri, 05 Aug 2011 12:40:17 +0200
289
290 libpve-common-perl (1.0-2) unstable; urgency=low
291
292 * depend on liburi-perl
293
294 -- Proxmox Support Team <support@proxmox.com> Thu, 14 Jul 2011 12:03:37 +0200
295
296 libpve-common-perl (1.0-1) unstable; urgency=low
297
298 * initial package
299
300 -- Proxmox Support Team <support@proxmox.com> Mon, 09 Aug 2010 14:54:24 +0200
301