-====================================
-Setup PVE v2 Development Environment
-====================================
+= Setup PVE Development Environment =
-1. Install Debian 'squeeze'
-2. Install prerequisites for development environment:
+1. Install Debian 'jessie'
+2. Configure pvetest repository in apt sources.list
+
+ deb http://download.proxmox.com/debian jessie pvetest
+
+3. Add our repository key with apt-key:
+
+ wget -O- "http://download.proxmox.com/debian/key.asc" | apt-key add -
+
+4. make sure you have a read IP address for your hostname in /etc/hosts
+ (using 127.0.1.1 will not work)
+
+5. run: apt-get update
+6. run: apt-get dist-upgrade
+7. run: apt-get install proxmox-ve-3.10.0
+
+You should now have a working Proxmox VE installation.
+
+= Install build prerequisites for development environment =
apt-get -y install build-essential git-core debhelper autotools-dev \
-doxygen check pkg-config libnss3-dev groff quilt dpatch libxml2-dev \
-libncurses5-dev libslang2-dev libldap2-dev xsltproc python-pexpect \
-python-pycurl libdbus-1-dev openipmi sg3-utils libnet-snmp-perl \
-libnet-telnet-perl snmp python-openssl libxml2-utils automake autoconf \
-libsqlite3-dev sqlite3 libfuse-dev libglib2.0-dev librrd-dev \
-librrds-perl rrdcached lintian libdevel-cycle-perl libjson-perl \
-liblinux-inotify2-perl libio-stringy-perl unzip fuse-utils \
-libcrypt-openssl-random-perl libcrypt-openssl-rsa-perl \
-libauthen-pam-perl libterm-readline-gnu-perl libssl-dev open-iscsi \
-libapache2-mod-perl2 libfilesys-df-perl libfile-readbackwards-perl \
-libpci-dev texi2html libgnutls-dev libsdl1.2-dev bridge-utils \
-libvncserver0 rpm2cpio apache2-mpm-prefork libintl-perl \
-libapache2-request-perl libnet-dns-perl vlan libio-socket-ssl-perl \
-libfile-sync-perl ifenslave-2.6 libnet-ldap-perl console-data
-
-3. Download and install the following git modules in order from top to bottom:
+autogen dh-autoreconf dkms doxygen check pkg-config groff quilt dpatch \
+automake autoconf libtool lintian libdevel-cycle-perl libjson-perl \
+libcommon-sense-perl liblinux-inotify2-perl libio-stringy-perl \
+libstring-shellquote-perl dh-systemd rpm2cpio libsqlite3-dev sqlite3 \
+libglib2.0-dev librrd-dev librrds-perl rrdcached libdigest-hmac-perl \
+libxml-parser-perl gdb libcrypt-openssl-random-perl \
+libcrypt-openssl-rsa-perl libnet-ldap-perl libauthen-pam-perl \
+libjson-xs-perl libterm-readline-gnu-perl oathtool libmime-base32-perl \
+liboath0 libpci-dev texi2html libsdl1.2-dev libgnutls28-dev \
+libspice-protocol-dev xfslibs-dev libnuma-dev libaio-dev \
+pve-libspice-server-dev libusbredirparser-dev glusterfs-common \
+libusb-1.0-0-dev librbd-dev libpopt-dev iproute bridge-utils numactl \
+glusterfs-common ceph-common python-ceph libgoogle-perftools4 \
+libfile-chdir-perl lvm2 glusterfs-client liblockfile-simple-perl \
+libsystemd-daemon-dev libreadline-gplv2-dev libio-multiplex-perl \
+libnetfilter-log-dev libipset3 ipset socat libsasl2-dev libogg-dev \
+python-pyparsing libfilesys-df-perl libcrypt-ssleay-perl \
+libfile-readbackwards-perl libanyevent-perl libanyevent-http-perl \
+unzip liblocale-po-perl vlan ifenslave-2.6 libfile-sync-perl cstream \
+lzop dtach apt-transport-https hdparm gdisk parted ttf-dejavu-core \
+liblzma-dev dosfstools mtools libxen-dev libfuse-dev libcorosync-pve-dev \
+libqb-dev libapparmor-dev docbook2x libcap-dev dh-apparmor libcgmanager-dev \
+graphviz libseccomp-dev libglib-perl libgtk3-perl libnss3-dev libdlm-dev \
+libudev-dev
+
+= Compile PVE packages from Source =
+
+Download and install the following git modules in order from top to bottom:
# git clone git://git.proxmox.com/git/<PACKAGE.git>
libqb.git
corosync-pve.git
-openais-pve.git
pve-common.git
pve-cluster.git
-redhat-cluster-pve.git
lvm.git
pve-access-control.git
pve-storage.git
pve-qemu-kvm.git
qemu-server.git
vncterm.git
+spiceterm.git
+#vzquota.git
+#vzctl.git
+#fence-agents-pve.git
+#resource-agents-pve.git
pve-manager.git
-pve-kernel-2.6.32.git
-fence-agents-pve.git
+#pve-kernel-3.10.0.git
+libiscsi.git
+#gfs2-utils.git
+ksm-control-daemon.git
+pve-container.git
+pve-firewall.git
+pve-kernel.git
-Most source can be installed with 'make dinstall' command.
+Most packages can be installed with 'make dinstall' command.
4. Reboot the system.
5. Learn to use the quilt patch scripts.
https://git.proxmox.com
-REST vs. SOAP
-=============
+= REST vs. SOAP =
We decided to change our SOAP API (1.X) and use a REST like API. The
concept is described in [1] (Resource Oriented Architecture
REST API using JSON. So we were able to remove the server side
template toolkit completely.
-JSON and JSON Schema
-====================
+= JSON and JSON Schema =
We use JSON as data format, because it is simple and parse-able by any
web browser.
we can automatically generate the whole API Documentation, and we can
verify all parameters and return values.
-An great side effect was that we are able to use JSON Schema to
+A great side effect was that we are able to use JSON Schema to
produce command line argument parsers automatically. In fact, the REST
API and the command line tools use the same code.
- automatic generation of API documentation
- easy way to create command line tools (using same API).
-API Implementation (PVE::RESTHandler)
-=====================================
+= API Implementation (PVE::RESTHandler) =
All classes exposing methods on the API use PVE::RESTHandler as base class.
The HTTP server use the URL (a path) to find the corresponding method.
-References
-==========
+= References =
+
[1] RESTful Web Services
Web services for the real world
projects / pve-common.git / blobdiff