bump version to 4.0-87

[pve-common.git] / README.dev

diff --git a/README.dev b/README.dev
index d69f623809732c4a8acf0424c99ab65cb9f43d88..a97f1c83a4986e53f51e59a9ce19d192c26c5132 100644 (file)
--- a/README.dev
+++ b/README.dev
@@ -1,23 +1,29 @@
-====================================
-Setup PVE Development Environment
-====================================
+= Setup PVE Development Environment =
 
 1. Install Debian 'jessie'
 2. Configure pvetest repository in apt sources.list
-3. make sure you have a read IP address for your hostname in /etc/hosts
+
+ deb http://download.proxmox.com/debian jessie pvetest
+
+3. Add our repository key with apt-key:
+
+ wget -O- "http://download.proxmox.com/debian/key.asc" | apt-key add -
+
+4. make sure you have a read IP address for your hostname in /etc/hosts
    (using 127.0.1.1 will not work)
-3. run: apt-get update
-3. run: apt-get dist-upgrade
-4. run: apt-get install proxmox-ve-3.10.0
 
-5. Install prerequisites for development environment:
+5. run: apt-get update
+6. run: apt-get dist-upgrade
+7. run: apt-get install proxmox-ve
 
-# new jessie depends
+You should now have a working Proxmox VE installation.
 
-apt-get -y install build-essential git-core debhelper autotools-dev \
-autogen dh-autoreconf dkms doxygen check pkg-config groff quilt dpatch \
-automake autoconf libtool lintian libdevel-cycle-perl libjson-perl \
-libcommon-sense-perl liblinux-inotify2-perl libio-stringy-perl \
+= Install build prerequisites for development environment =
+
+apt-get -y install build-essential git-core git-email debhelper \
+autotools-dev autogen dh-autoreconf dkms doxygen check pkg-config \
+groff quilt dpatch automake autoconf libtool lintian libdevel-cycle-perl \
+libjson-perl libcommon-sense-perl liblinux-inotify2-perl libio-stringy-perl \
 libstring-shellquote-perl dh-systemd rpm2cpio libsqlite3-dev sqlite3 \
 libglib2.0-dev librrd-dev librrds-perl rrdcached libdigest-hmac-perl \
 libxml-parser-perl gdb libcrypt-openssl-random-perl \
@@ -25,7 +31,7 @@ libcrypt-openssl-rsa-perl libnet-ldap-perl libauthen-pam-perl \
 libjson-xs-perl libterm-readline-gnu-perl oathtool libmime-base32-perl \
 liboath0 libpci-dev texi2html libsdl1.2-dev libgnutls28-dev \
 libspice-protocol-dev xfslibs-dev libnuma-dev libaio-dev \
-libspice-server-dev libusbredirparser-dev glusterfs-common \
+pve-libspice-server-dev libusbredirparser-dev glusterfs-common \
 libusb-1.0-0-dev librbd-dev libpopt-dev iproute bridge-utils numactl \
 glusterfs-common ceph-common python-ceph libgoogle-perftools4 \
 libfile-chdir-perl lvm2 glusterfs-client liblockfile-simple-perl \
@@ -35,9 +41,14 @@ python-pyparsing libfilesys-df-perl libcrypt-ssleay-perl \
 libfile-readbackwards-perl libanyevent-perl libanyevent-http-perl \
 unzip liblocale-po-perl vlan ifenslave-2.6 libfile-sync-perl cstream \
 lzop dtach apt-transport-https hdparm gdisk parted ttf-dejavu-core \
-liblzma-dev dosfstools mtools libxen-dev
+liblzma-dev dosfstools mtools libxen-dev libfuse-dev libcorosync-pve-dev \
+libqb-dev libapparmor-dev docbook2x libcap-dev dh-apparmor libcgmanager-dev \
+graphviz libseccomp-dev libglib-perl libgtk3-perl libnss3-dev libdlm-dev \
+libudev-dev
+
+= Compile PVE packages from Source =
 
-3.  Download and install the following git modules in order from top to bottom:
+Download and install the following git modules in order from top to bottom:
 
 # git clone git://git.proxmox.com/git/<PACKAGE.git>
 
@@ -46,6 +57,7 @@ You currently need the following packages:
 libqb.git
 corosync-pve.git
 pve-common.git
+pve-docs.git
 pve-cluster.git
 lvm.git
 pve-access-control.git
@@ -59,10 +71,13 @@ spiceterm.git
 #fence-agents-pve.git
 #resource-agents-pve.git
 pve-manager.git
-pve-kernel-3.10.0.git
+#pve-kernel-3.10.0.git
 libiscsi.git
 #gfs2-utils.git
 ksm-control-daemon.git
+pve-container.git
+pve-firewall.git
+pve-kernel.git
 
 Most packages can be installed with 'make dinstall' command.
 
@@ -80,8 +95,7 @@ You can view the source code at:
 https://git.proxmox.com
 
 
-REST vs. SOAP
-=============
+= REST vs. SOAP =
 
 We decided to change our SOAP API (1.X) and use a REST like API. The
 concept is described in [1] (Resource Oriented Architecture
@@ -96,8 +110,7 @@ That framework, like any other AJAX toolkit, can talk directly to the
 REST API using JSON. So we were able to remove the server side
 template toolkit completely.
 
-JSON and JSON Schema
-====================
+= JSON and JSON Schema =
 
 We use JSON as data format, because it is simple and parse-able by any
 web browser.
@@ -122,8 +135,7 @@ So here is a summary of the advantage:
    - automatic generation of API documentation
    - easy way to create command line tools (using same API).
 
-API Implementation (PVE::RESTHandler)
-=====================================
+= API Implementation (PVE::RESTHandler) =
 
 All classes exposing methods on the API use PVE::RESTHandler as base class.
 
@@ -212,8 +224,8 @@ C1->find_handler('GET', "/sub2/index") => C2::list2
 The HTTP server use the URL (a path) to find the corresponding method. 
 
 
-References
-==========
+= References =
+
 [1] RESTful Web Services
 Web services for the real world