chomp $line;
if ($line =~ m/^(search|domain)\s+(\S+)\s*/) {
$res->{search} = $2;
- } elsif ($line =~ m/^nameserver\s+(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})\s*/) {
+ } elsif ($line =~ m/^\s*nameserver\s+($PVE::Tools::IPRE)\s*/) {
$nscount++;
if ($nscount <= 3) {
$res->{"dns$nscount"} = $1;
my $saved = $task->{saved} ? 1 : 0;
if ($task->{endtime}) {
if ($task->{status}) {
- $raw .= sprintf("$upid $saved %08X $task->{status}\n", $task->{endtime});
+ $raw .= sprintf("%s %s %08X %s\n", $upid, $saved, $task->{endtime}, $task->{status});
} else {
- $raw .= sprintf("$upid $saved %08X\n", $task->{endtime});
+ $raw .= sprintf("%s %s %08X\n", $upid, $saved, $task->{endtime});
}
} else {
$raw .= "$upid $saved\n";
return $v;
};
+# config => {
+# ifaces => {
+# $ifname => {
+# <optional> exists => BOOL,
+# <optional> active => BOOL,
+# <optional> autostart => BOOL,
+# <auto> priority => INT,
+#
+# type => "eth" | "bridge" | "bond" | "loopback" | "OVS*" | ... ,
+#
+# families => ["inet", "inet6", ...],
+#
+# method => "manual" | "static" | "dhcp" | ... ,
+# address => IP,
+# netmask => SUBNET,
+# broadcast => IP,
+# gateway => IP,
+# comments => [ "..." ],
+#
+# method6 => "manual" | "static" | "dhcp" | ... ,
+# address6 => IP,
+# netmask6 => SUBNET,
+# gateway6 => IP,
+# comments6 => [ "..." ],
+#
+# <known options>, # like bridge_ports, ovs_*
+#
+# # extra/unknown options stored by-family:
+# options => { <inet options>... }
+# options6 => { <inet6 options>... }
+# }
+# },
+# options => [
+# # mappings end up here as well, as we don't need to understand them
+# [priority,line]
+# ]
+# }
sub read_etc_network_interfaces {
my ($filename, $fh) = @_;
+ my $proc_net_dev = IO::File->new('/proc/net/dev', 'r');
+ my $active = PVE::Network::get_active_interfaces();
+ return __read_etc_network_interfaces($fh, $proc_net_dev, $active);
+}
+
+sub __read_etc_network_interfaces {
+ my ($fh, $proc_net_dev, $active_ifaces) = @_;
- my $ifaces = {};
+ my $config = {};
+ my $ifaces = $config->{ifaces} = {};
+ my $options = $config->{options} = [];
my $line;
- if (my $fd2 = IO::File->new("/proc/net/dev", "r")) {
- while (defined ($line = <$fd2>)) {
+ if ($proc_net_dev) {
+ while (defined ($line = <$proc_net_dev>)) {
if ($line =~ m/^\s*(eth\d+):.*/) {
$ifaces->{$1}->{exists} = 1;
}
}
- close($fd2);
+ close($proc_net_dev);
}
# we try to keep order inside the file
my $priority = 2; # 1 is reserved for lo
- my $gateway = 0;
-
- while (defined ($line = <$fh>)) {
+ SECTION: while (defined ($line = <$fh>)) {
chomp ($line);
- next if $line =~ m/^#/;
+ next if $line =~ m/^\s*#/;
- if ($line =~ m/^auto\s+(.*)$/) {
+ if ($line =~ m/^\s*auto\s+(.*)$/) {
my @aa = split (/\s+/, $1);
foreach my $a (@aa) {
$ifaces->{$a}->{autostart} = 1;
}
- } elsif ($line =~ m/^iface\s+(\S+)\s+inet\s+(\S+)\s*$/) {
+ } elsif ($line =~ m/^\s*iface\s+(\S+)\s+(inet6?)\s+(\S+)\s*$/) {
my $i = $1;
- $ifaces->{$i}->{method} = $2;
- $ifaces->{$i}->{priority} = $priority++;
+ my $family = $2;
+ my $f = { method => $3 }; # by family, merged to $d with a $suffix
+ (my $suffix = $family) =~ s/^inet//;
+
+ my $d = $ifaces->{$i} ||= {};
+ $d->{priority} = $priority++ if !$d->{priority};
+ push @{$d->{families}}, $family;
- my $d = $ifaces->{$i};
while (defined ($line = <$fh>)) {
- if ($line =~ m/^\s*#(.*)\s*$/) {
+ chomp $line;
+ if ($line =~ m/^\s*#(.*?)\s*$/) {
# NOTE: we use 'comments' instead of 'comment' to
# avoid automatic utf8 conversion
- $d->{comments} = '' if !$d->{comments};
- $d->{comments} .= "$1\n";
- } elsif ($line =~ m/^\s+((\S+)\s+(.+))$/) {
+ $f->{comments} = '' if !$f->{comments};
+ $f->{comments} .= "$1\n";
+ } elsif ($line =~ m/^\s*(?:iface\s
+ |mapping\s
+ |auto\s
+ |allow-
+ |source\s
+ |source-directory\s
+ )/x) {
+ last;
+ } elsif ($line =~ m/^\s*((\S+)\s+(.+))$/) {
my $option = $1;
my ($id, $value) = ($2, $3);
- if (($id eq 'address') || ($id eq 'netmask') || ($id eq 'broadcast')) {
- $d->{$id} = $value;
- } elsif ($id eq 'gateway') {
- $d->{$id} = $value;
- $gateway = 1;
+ if (($id eq 'address') || ($id eq 'netmask') || ($id eq 'broadcast') || ($id eq 'gateway')) {
+ $f->{$id} = $value;
} elsif ($id eq 'ovs_type' || $id eq 'ovs_options'|| $id eq 'ovs_bridge' ||
$id eq 'ovs_bonds' || $id eq 'ovs_ports') {
$d->{$id} = $value;
$devs->{$p} = 1;
}
my $str = join (' ', sort keys %{$devs});
- $d->{$id} = $str || '';
+ if ($d->{$id}) {
+ $d->{$id} .= ' ' . $str if $str;
+ } else {
+ $d->{$id} = $str || '';
+ }
} elsif ($id eq 'bridge_stp') {
if ($value =~ m/^\s*(on|yes)\s*$/i) {
$d->{$id} = 'on';
}
} elsif ($id eq 'bridge_fd') {
$d->{$id} = $value;
+ } elsif ($id eq 'bridge_vlan_aware') {
+ $d->{$id} = 1;
} elsif ($id eq 'bond_miimon') {
$d->{$id} = $value;
} elsif ($id eq 'bond_xmit_hash_policy') {
}
$d->{$id} = $value;
} else {
- push @{$d->{options}}, $option;
+ push @{$f->{options}}, $option;
}
} else {
last;
}
}
+ $d->{"$_$suffix"} = $f->{$_} foreach (keys %$f);
+ last SECTION if !defined($line);
+ redo SECTION;
+ } elsif ($line =~ /\w/) {
+ push @$options, [$priority++, $line];
}
}
-
+ foreach my $ifname (@$active_ifaces) {
+ if (my $iface = $ifaces->{$ifname}) {
+ $iface->{active} = 1;
+ }
+ }
if (!$ifaces->{lo}) {
$ifaces->{lo}->{priority} = 1;
$ifaces->{$1}->{exists} = 0;
$d->{exists} = 0;
}
+ } elsif ($iface =~ m/^(\S+)\.\d+$/) {
+ $d->{type} = 'vlan';
+ if (defined ($ifaces->{$1})) {
+ $d->{exists} = $ifaces->{$1}->{exists};
+ } else {
+ $ifaces->{$1}->{exists} = 0;
+ $d->{exists} = 0;
+ }
} elsif ($iface =~ m/^eth\d+$/) {
if (!$d->{ovs_type}) {
$d->{type} = 'eth';
}
$d->{method} = 'manual' if !$d->{method};
+ $d->{method6} = 'manual' if !$d->{method6};
+
+ $d->{families} ||= ['inet'];
}
- if (my $fd2 = IO::File->new("/proc/net/if_inet6", "r")) {
- while (defined ($line = <$fd2>)) {
- if ($line =~ m/^[a-f0-9]{32}\s+[a-f0-9]{2}\s+[a-f0-9]{2}\s+[a-f0-9]{2}\s+[a-f0-9]{2}\s+(\S+)$/) {
- $ifaces->{$1}->{active} = 1 if defined($ifaces->{$1});
+ # OVS bridges create "allow-$BRIDGE $IFACE" lines which we need to remove
+ # from the {options} hash for them to be removed correctly.
+ @$options = grep {defined($_)} map {
+ my ($pri, $line) = @$_;
+ if ($line =~ /^allow-(\S+)\s+(.*)$/) {
+ my $bridge = $1;
+ my @ports = split(/\s+/, $2);
+ if (defined(my $br = $ifaces->{$bridge})) {
+ # if this port is part of a bridge, remove it
+ my %in_ovs_ports = map {$_=>1} split(/\s+/, $br->{ovs_ports});
+ @ports = grep { not $in_ovs_ports{$_} } @ports;
+ }
+ # create the allow line for the remaining ports, or delete if empty
+ if (@ports) {
+ [$pri, "allow-$bridge " . join(' ', @ports)];
+ } else {
+ undef;
}
+ } else {
+ # don't modify other lines
+ $_;
}
- close ($fd2);
- }
+ } @$options;
- return $ifaces;
+ return $config;
}
sub __interface_to_string {
- my ($iface, $d) = @_;
+ my ($iface, $d, $family, $first_block) = @_;
+
+ (my $suffix = $family) =~ s/^inet//;
- return '' if !($d && $d->{method});
+ return '' if !($d && $d->{"method$suffix"});
my $raw = '';
- $raw .= "iface $iface inet $d->{method}\n";
- $raw .= "\taddress $d->{address}\n" if $d->{address};
- $raw .= "\tnetmask $d->{netmask}\n" if $d->{netmask};
- $raw .= "\tgateway $d->{gateway}\n" if $d->{gateway};
- $raw .= "\tbroadcast $d->{broadcast}\n" if $d->{broadcast};
+ $raw .= "iface $iface $family " . $d->{"method$suffix"} . "\n";
+ $raw .= "\taddress " . $d->{"address$suffix"} . "\n" if $d->{"address$suffix"};
+ $raw .= "\tnetmask " . $d->{"netmask$suffix"} . "\n" if $d->{"netmask$suffix"};
+ $raw .= "\tgateway " . $d->{"gateway$suffix"} . "\n" if $d->{"gateway$suffix"};
+ $raw .= "\tbroadcast " . $d->{"broadcast$suffix"} . "\n" if $d->{"broadcast$suffix"};
my $done = { type => 1, priority => 1, method => 1, active => 1, exists => 1,
comments => 1, autostart => 1, options => 1,
- address => 1, netmask => 1, gateway => 1, broadcast => 1 };
-
- if ($d->{type} eq 'bridge') {
+ address => 1, netmask => 1, gateway => 1, broadcast => 1,
+ method6 => 1, families => 1, options6 => 1,
+ address6 => 1, netmask6 => 1, gateway6 => 1, broadcast6 => 1 };
+
+ if (!$first_block) {
+ # not printing out options
+ } elsif ($d->{type} eq 'bridge') {
my $ports = $d->{bridge_ports} || 'none';
$raw .= "\tbridge_ports $ports\n";
$v = defined($d->{bridge_fd}) ? $d->{bridge_fd} : 0;
$raw .= "\tbridge_fd $v\n";
$done->{bridge_fd} = 1;
+
+ if( defined($d->{bridge_vlan_aware})) {
+ $raw .= "\tbridge_vlan_aware yes\n";
+ }
+ $done->{bridge_vlan_aware} = 1;
} elsif ($d->{type} eq 'bond') {
$raw .= "\tovs_ports $d->{ovs_ports}\n" if $d->{ovs_ports};
$done->{ovs_ports} = 1;
-
} elsif ($d->{type} eq 'OVSPort' || $d->{type} eq 'OVSIntPort' ||
$d->{type} eq 'OVSBond') {
$done->{ovs_bonds} = 1;
}
- if ($d->{ovs_bridge}) {
- $raw = "allow-$d->{ovs_bridge} $iface\n$raw";
- }
-
$raw .= "\tovs_type $d->{type}\n";
$done->{ovs_type} = 1;
if ($d->{ovs_bridge}) {
+ $raw = "allow-$d->{ovs_bridge} $iface\n$raw";
$raw .= "\tovs_bridge $d->{ovs_bridge}\n";
$done->{ovs_bridge} = 1;
}
- # fixme: use Data::Dumper; print Dumper($d);
}
- # print other settings
- foreach my $k (keys %$d) {
- next if $done->{$k};
- next if !$d->{$k};
- $raw .= "\t$k $d->{$k}\n";
+ if ($first_block) {
+ # print other settings
+ foreach my $k (keys %$d) {
+ next if $done->{$k};
+ next if !$d->{$k};
+ $raw .= "\t$k $d->{$k}\n";
+ }
}
- foreach my $option (@{$d->{options}}) {
+ foreach my $option (@{$d->{"options$suffix"}}) {
$raw .= "\t$option\n";
}
# add comments
- my $comments = $d->{comments} || '';
+ my $comments = $d->{"comments$suffix"} || '';
foreach my $cl (split(/\n/, $comments)) {
$raw .= "#$cl\n";
}
- if ($d->{autostart}) {
- $raw = "auto $iface\n$raw";
- }
-
$raw .= "\n";
return $raw;
}
+
sub write_etc_network_interfaces {
- my ($filename, $fh, $ifaces) = @_;
+ my ($filename, $fh, $config) = @_;
+ my $raw = __write_etc_network_interfaces($config);
+ PVE::Tools::safe_print($filename, $fh, $raw);
+}
+sub __write_etc_network_interfaces {
+ my ($config) = @_;
+
+ my $ifaces = $config->{ifaces};
+ my @options = @{$config->{options}};
my $used_ports = {};
$d->{type} eq 'OVSBond') {
my $brname = $used_ports->{$iface};
if (!$brname || !$ifaces->{$brname}) {
- delete $ifaces->{$iface};
+ if ($iface =~ /^eth/) {
+ $ifaces->{$iface} = { type => 'eth',
+ exists => 1,
+ method => 'manual',
+ families => ['inet'] };
+ } else {
+ delete $ifaces->{$iface};
+ }
next;
}
my $bd = $ifaces->{$brname};
my $n = $ifaces->{$p};
die "OVS bridge '$iface' - unable to find port '$p'\n"
if !$n;
+ $n->{autostart} = 0;
if ($n->{type} eq 'eth') {
$n->{type} = 'OVSPort';
$n->{ovs_bridge} = $iface;
}
}
- my $raw = "# network interface settings\n";
+ my $raw = <<'NETWORKDOC';
+# network interface settings; autogenerated
+# Please do NOT modify this file directly, unless you know what
+# you're doing.
+#
+# If you want to manage part of the network configuration manually,
+# please utilize the 'source' or 'source-directory' directives to do
+# so.
+# PVE will preserve these directives, but will NOT its network
+# configuration from sourced files, so do not attempt to move any of
+# the PVE managed interfaces into external files!
+
+NETWORKDOC
my $printed = {};
my $if_type_hash = {
- unknown => 0,
- loopback => 10,
- eth => 20,
- bond => 30,
- bridge => 40,
+ loopback => 100000,
+ eth => 200000,
+ bond => 300000,
+ bridge => 400000,
};
my $lookup_type_prio = sub {
my $iface = shift;
- my $alias = 0;
- if ($iface =~ m/^(\S+):\d+$/) {
+ my $child = 0;
+ if ($iface =~ m/^(\S+)(\.|:)\d+$/) {
$iface = $1;
- $alias = 1;
+ $child = 1;
}
my $pri;
if ($iface eq 'lo') {
$pri = $if_type_hash->{loopback};
} elsif ($iface =~ m/^eth\d+$/) {
- $pri = $if_type_hash->{eth} + $alias;
+ $pri = $if_type_hash->{eth} + $child;
} elsif ($iface =~ m/^bond\d+$/) {
- $pri = $if_type_hash->{bond} + $alias;
+ $pri = $if_type_hash->{bond} + $child;
} elsif ($iface =~ m/^vmbr\d+$/) {
- $pri = $if_type_hash->{bridge} + $alias;
+ $pri = $if_type_hash->{bridge} + $child;
}
- return $pri || ($if_type_hash->{unknown} + $alias);
+ return $pri;
};
foreach my $iface (sort {
my $ref1 = $ifaces->{$a};
my $ref2 = $ifaces->{$b};
- my $p1 = &$lookup_type_prio($a);
- my $p2 = &$lookup_type_prio($b);
+ my $tp1 = &$lookup_type_prio($a);
+ my $tp2 = &$lookup_type_prio($b);
- return $p1 <=> $p2 if $p1 != $p2;
+ # Only recognized types are in relation to each other. If one type
+ # is unknown then only consider the interfaces' priority attributes.
+ $tp1 = $tp2 = 0 if !defined($tp1) || !defined($tp2);
- $p1 = $ref1->{priority} || 100000;
- $p2 = $ref2->{priority} || 100000;
+ my $p1 = $tp1 + ($ref1->{priority} // 50000);
+ my $p2 = $tp2 + ($ref2->{priority} // 50000);
return $p1 <=> $p2 if $p1 != $p2;
return $a cmp $b;
- } keys %$ifaces) {
+ } keys %$ifaces) {
+ next if $printed->{$iface};
my $d = $ifaces->{$iface};
-
- next if $printed->{$iface};
+ my $pri = $d->{priority} // 0;
+ if (@options && $options[0]->[0] < $pri) {
+ do {
+ $raw .= (shift @options)->[1] . "\n";
+ } while (@options && $options[0]->[0] < $pri);
+ $raw .= "\n";
+ }
$printed->{$iface} = 1;
- $raw .= __interface_to_string($iface, $d);
+ $raw .= "auto $iface\n" if $d->{autostart};
+ my $i = 0; # some options should be printed only once
+ $raw .= __interface_to_string($iface, $d, $_, !$i++) foreach @{$d->{families}};
}
-
- PVE::Tools::safe_print($filename, $fh, $raw);
+
+ $raw .= $_->[1] . "\n" foreach @options;
+ return $raw;
}
register_file('interfaces', "/etc/network/interfaces",
projects / pve-common.git / blobdiff