From f3ccd9b4b9bad4c762c63ef144600c4e7016640f Mon Sep 17 00:00:00 2001 From: Wolfgang Bumiller Date: Thu, 29 Sep 2016 11:37:49 +0200 Subject: [PATCH] Network: add disable_ipv6 and use it Many interfaces used to get an ipv6 link-local address which was usually unusable and therefore pointless. In order to ensure consistency this is called in various places: * $bridge_add_interface() and $ovs_bridge_add_port() because it's generally a good choice for bridge ports. * tap_create() and veth_create() because the activate the interfaces and we want to avoid the link local address to exist temporarily between bringing the interface up and adding it to a bridge. * create_firewall_bridge_*() because firewall bridges aren't meant to have addresses either. * activate_bridge_vlan() - if vlan_filtering is disabled we create vlan-bridges and neither them nor their physical ports should have link local addresses. --- src/PVE/Network.pm | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/src/PVE/Network.pm b/src/PVE/Network.pm index b760c42..3a0d778 100644 --- a/src/PVE/Network.pm +++ b/src/PVE/Network.pm @@ -171,9 +171,20 @@ my $cond_create_bridge = sub { } }; +sub disable_ipv6 { + my ($iface) = @_; + return if !-d '/proc/sys/net/ipv6'; # ipv6 might be completely disabled + my $file = "/proc/sys/net/ipv6/conf/$iface/disable_ipv6"; + open(my $fh, '>', $file) or die "failed to open $file for writing: $!\n"; + print {$fh} "1\n" or die "failed to disable link-local ipv6 for $iface\n"; + close($fh); +} + my $bridge_add_interface = sub { my ($bridge, $iface, $tag, $trunks) = @_; + # drop link local address (it can't be used when on a bridge anyway) + disable_ipv6($iface); system("/sbin/brctl addif $bridge $iface") == 0 || die "can't add interface 'iface' to bridge '$bridge'\n"; @@ -215,6 +226,7 @@ my $ovs_bridge_add_port = sub { $cmd .= " -- set Interface $iface type=internal" if $internal; system($cmd) == 0 || die "can't add ovs port '$iface'\n"; + disable_ipv6($iface); }; my $activate_interface = sub { @@ -232,6 +244,7 @@ sub tap_create { my $bridgemtu = &$read_bridge_mtu($bridge); eval { + disable_ipv6($iface); PVE::Tools::run_command("/sbin/ifconfig $iface 0.0.0.0 promisc up mtu $bridgemtu"); }; die "interface activation failed\n" if $@; @@ -252,6 +265,8 @@ sub veth_create { } # up vethpair + disable_ipv6($veth); + disable_ipv6($vethpeer); &$activate_interface($veth); &$activate_interface($vethpeer); } @@ -272,6 +287,7 @@ my $create_firewall_bridge_linux = sub { my ($fwbr, $vethfw, $vethfwpeer) = &$compute_fwbr_names($vmid, $devid); &$cond_create_bridge($fwbr); + disable_ipv6($fwbr); &$activate_interface($fwbr); copy_bridge_config($bridge, $fwbr); @@ -292,6 +308,7 @@ my $create_firewall_bridge_ovs = sub { my $bridgemtu = &$read_bridge_mtu($bridge); &$cond_create_bridge($fwbr); + disable_ipv6($fwbr); &$activate_interface($fwbr); &$bridge_add_interface($fwbr, $iface); @@ -410,10 +427,13 @@ sub activate_bridge_vlan_slave { # create vlan on $iface is not already exist if (! -d "/sys/class/net/$ifacevlan") { - system("/sbin/ip link add link $iface name ${iface}.${tag} type vlan id $tag") == 0 || + system("/sbin/ip link add link $iface name $ifacevlan type vlan id $tag") == 0 || die "can't add vlan tag $tag to interface $iface\n"; } + # remove ipv6 link-local address before activation + disable_ipv6($ifacevlan); + # be sure to have the $ifacevlan up &$activate_interface($ifacevlan); @@ -468,9 +488,10 @@ sub activate_bridge_vlan { #fixme: set other bridge flags + # remove ipv6 link-local address before activation + disable_ipv6($bridgevlan); # be sure to have the bridge up - system("/sbin/ip link set $bridgevlan up") == 0 || - die "can't up bridge $bridgevlan\n"; + &$activate_interface($bridgevlan); }); return $bridgevlan; } -- 2.39.2