pct-network-opts.adoc

   1 `net[n]`: `name=<string> [,bridge=<bridge>] [,firewall=<1|0>] [,gw=<GatewayIPv4>] [,gw6=<GatewayIPv6>] [,hwaddr=<XX:XX:XX:XX:XX:XX>] [,ip=<IPv4Format/CIDR>] [,ip6=<IPv6Format/CIDR>] [,mtu=<integer>] [,rate=<mbps>] [,tag=<integer>] [,trunks=<vlanid[;vlanid...]>] [,type=<veth>]` ::
   2
   3 Specifies network interfaces for the container.
   4
   5 `bridge`=`<bridge>` ;;
   6
   7 Bridge to attach the network device to.
   8
   9 `firewall`=`<boolean>` ;;
  10
  11 Controls whether this interface's firewall rules should be used.
  12
  13 `gw`=`<GatewayIPv4>` ;;
  14
  15 Default gateway for IPv4 traffic.
  16
  17 `gw6`=`<GatewayIPv6>` ;;
  18
  19 Default gateway for IPv6 traffic.
  20
  21 `hwaddr`=`<XX:XX:XX:XX:XX:XX>` ;;
  22
  23 The interface MAC address. This is dynamically allocated by default, but you can set that statically if needed, for example to always have the same link-local IPv6 address. (lxc.network.hwaddr)
  24
  25 `ip`=`<IPv4Format/CIDR>` ;;
  26
  27 IPv4 address in CIDR format.
  28
  29 `ip6`=`<IPv6Format/CIDR>` ;;
  30
  31 IPv6 address in CIDR format.
  32
  33 `mtu`=`<integer> (64 - N)` ;;
  34
  35 Maximum transfer unit of the interface. (lxc.network.mtu)
  36
  37 `name`=`<string>` ;;
  38
  39 Name of the network device as seen from inside the container. (lxc.network.name)
  40
  41 `rate`=`<mbps>` ;;
  42
  43 Apply rate limiting to the interface
  44
  45 `tag`=`<integer> (1 - 4094)` ;;
  46
  47 VLAN tag for this interface.
  48
  49 `trunks`=`<vlanid[;vlanid...]>` ;;
  50
  51 VLAN ids to pass through the interface
  52
  53 `type`=`<veth>` ;;
  54
  55 Network interface type.
  56