pct-network-opts.adoc

   1 `net[n]`: `name=<string> [,bridge=<bridge>] [,firewall=<1|0>] [,gw=<GatewayIPv4>] [,gw6=<GatewayIPv6>] [,hwaddr=<XX:XX:XX:XX:XX:XX>] [,ip=<IPv4Format/CIDR>] [,ip6=<IPv6Format/CIDR>] [,mtu=<integer>] [,rate=<mbps>] [,tag=<integer>] [,trunks=<vlanid[;vlanid...]>] [,type=<veth>]`
   2
   3 `bridge`: `<bridge>` ::
   4
   5 Bridge to attach the network device to.
   6
   7 `firewall`: `boolean` ::
   8
   9 Controls whether this interface's firewall rules should be used.
  10
  11 `gw`: `<GatewayIPv4>` ::
  12
  13 Default gateway for IPv4 traffic.
  14
  15 `gw6`: `<GatewayIPv6>` ::
  16
  17 Default gateway for IPv6 traffic.
  18
  19 `hwaddr`: `<XX:XX:XX:XX:XX:XX>` ::
  20
  21 The interface MAC address. This is dynamically allocated by default, but
  22 you can set that statically if needed, for example to always have the same
  23 link-local IPv6 address. (lxc.network.hwaddr)
  24
  25 `ip`: `<IPv4Format/CIDR>` ::
  26
  27 IPv4 address in CIDR format.
  28
  29 `ip6`: `<IPv6Format/CIDR>` ::
  30
  31 IPv6 address in CIDR format.
  32
  33 `mtu`: `integer (64 - N)` ::
  34
  35 Maximum transfer unit of the interface. (lxc.network.mtu)
  36
  37 `name`: `<string>` ::
  38
  39 Name of the network device as seen from inside the container.
  40 (lxc.network.name)
  41
  42 `rate`: `<mbps>` ::
  43
  44 Apply rate limiting to the interface
  45
  46 `tag`: `integer (2 - 4094)` ::
  47
  48 VLAN tag for this interface.
  49
  50 `trunks`: `<vlanid[;vlanid...]>` ::
  51
  52 VLAN ids to pass through the interface
  53
  54 `type`: `(veth)` ::
  55
  56 Network interface type.
  57