[[sysadmin_certificate_management]] Certificate Management ---------------------- ifdef::wiki[] :pve-toplevel: endif::wiki[] Certificates for Intra-Cluster Communication ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Each {PVE} cluster creates by default its own (self-signed) Certificate Authority (CA) and generates a certificate for each node which gets signed by the aforementioned CA. These certificates are used for encrypted communication with the cluster's `pveproxy` service and the Shell/Console feature if SPICE is used. The CA certificate and key are stored in the xref:chapter_pmxcfs[Proxmox Cluster File System (pmxcfs)]. [[sysadmin_certs_api_gui]] Certificates for API and Web GUI ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The REST API and web GUI are provided by the `pveproxy` service, which runs on each node. You have the following options for the certificate used by `pveproxy`: 1. By default the node-specific certificate in `/etc/pve/nodes/NODENAME/pve-ssl.pem` is used. This certificate is signed by the cluster CA and therefore not automatically trusted by browsers and operating systems. 2. use an externally provided certificate (e.g. signed by a commercial CA). 3. use ACME (Let's Encrypt) to get a trusted certificate with automatic renewal, this is also integrated in the {pve} API and Webinterface. For options 2 and 3 the file `/etc/pve/local/pveproxy-ssl.pem` (and `/etc/pve/local/pveproxy-ssl.key`, which needs to be without password) is used. NOTE: Keep in mind that `/etc/pve/local` is a node specific symlink to `/etc/pve/nodes/NODENAME`. Certificates are managed with the {PVE} Node management command (see the `pvenode(1)` manpage). WARNING: Do not replace or manually modify the automatically generated node certificate files in `/etc/pve/local/pve-ssl.pem` and `/etc/pve/local/pve-ssl.key` or the cluster CA files in `/etc/pve/pve-root-ca.pem` and `/etc/pve/priv/pve-root-ca.key`. [[sysadmin_certs_upload_custom]] Upload Custom Certificate ~~~~~~~~~~~~~~~~~~~~~~~~~ If you already have a certificate which you want to use for a {pve} node you can upload that certificate simply over the web interface. [thumbnail="screenshot/gui-node-certs-upload-custom.png"] Note that the certificates key file, if provided, mustn't be password protected. [[sysadmin_certs_get_trusted_acme_cert]] Trusted certificates via Let's Encrypt (ACME) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ {PVE} includes an implementation of the **A**utomatic **C**ertificate **M**anagement **E**nvironment **ACME** protocol, allowing {pve} admins to use an ACME provider like Let's Encrypt for easy setup of TLS certificates which are accepted and trusted on modern operating systems and web browsers out of the box. Currently, the two ACME endpoints implemented are the https://letsencrypt.org[Let's Encrypt (LE)] production and its staging environment. Our ACME client supports validation of `http-01` challenges using a built-in web server and validation of `dns-01` challenges using a DNS plugin supporting all the DNS API endpoints https://acme.sh[acme.sh] does. [[sysadmin_certs_acme_account]] ACME Account ^^^^^^^^^^^^ [thumbnail="screenshot/gui-datacenter-acme-register-account.png"] You need to register an ACME account per cluster with the endpoint you want to use. The email address used for that account will serve as contact point for renewal-due or similar notifications from the ACME endpoint. You can register and deactivate ACME accounts over the web interface `Datacenter -> ACME` or using the `pvenode` command line tool. ---- pvenode acme account register account-name mail@example.com ---- TIP: Because of https://letsencrypt.org/docs/rate-limits/[rate-limits] you should use LE `staging` for experiments or if you use ACME for the first time. [[sysadmin_certs_acme_plugins]] ACME Plugins ^^^^^^^^^^^^ The ACME plugins task is to provide automatic verification that you, and thus the {pve} cluster under your operation, are the real owner of a domain. This is the basis building block for automatic certificate management. The ACME protocol specifies different types of challenges, for example the `http-01` where a web server provides a file with a certain content to prove that it controls a domain. Sometimes this isn't possible, either because of technical limitations or if the address of a record to is not reachable from the public internet. The `dns-01` challenge can be used in these cases. This challenge is fulfilled by creating a certain DNS record in the domain's zone. [thumbnail="screenshot/gui-datacenter-acme-overview.png"] {pve} supports both of those challenge types out of the box, you can configure plugins either over the web interface under `Datacenter -> ACME`, or using the `pvenode acme plugin add` command. ACME Plugin configurations are stored in `/etc/pve/priv/acme/plugins.cfg`. A plugin is available for all nodes in the cluster. Node Domains ^^^^^^^^^^^^ Each domain is node specific. You can add new or manage existing domain entries under `Node -> Certificates`, or using the `pvenode config` command. [thumbnail="screenshot/gui-node-certs-add-domain.png"] After configuring the desired domain(s) for a node and ensuring that the desired ACME account is selected, you can order your new certificate over the web-interface. On success the interface will reload after 10 seconds. Renewal will happen xref:sysadmin_certs_acme_automatic_renewal[automatically]. [[sysadmin_certs_acme_http_challenge]] ACME HTTP Challenge Plugin ~~~~~~~~~~~~~~~~~~~~~~~~~~ There is always an implicitly configured `standalone` plugin for validating `http-01` challenges via the built-in webserver spawned on port 80. NOTE: The name `standalone` means that it can provide the validation on it's own, without any third party service. So, this plugin works also for cluster nodes. There are a few prerequisites to use it for certificate management with Let's Encrypts ACME. * You have to accept the ToS of Let's Encrypt to register an account. * **Port 80** of the node needs to be reachable from the internet. * There **must** be no other listener on port 80. * The requested (sub)domain needs to resolve to a public IP of the Node. [[sysadmin_certs_acme_dns_challenge]] ACME DNS API Challenge Plugin ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ On systems where external access for validation via the `http-01` method is not possible or desired, it is possible to use the `dns-01` validation method. This validation method requires a DNS server that allows provisioning of `TXT` records via an API. [[sysadmin_certs_acme_dns_api_config]] Configuring ACME DNS APIs for validation ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ {PVE} re-uses the DNS plugins developed for the `acme.sh` footnote:[acme.sh https://github.com/acmesh-official/acme.sh] project, please refer to its documentation for details on configuration of specific APIs. The easiest way to configure a new plugin with the DNS API is using the web interface (`Datacenter -> ACME`). [thumbnail="screenshot/gui-datacenter-acme-add-dns-plugin.png"] Choose `DNS` as challenge type. Then you can select your API provider, enter the credential data to access your account over their API. TIP: See the acme.sh https://github.com/acmesh-official/acme.sh/wiki/dnsapi#how-to-use-dns-api[How to use DNS API] wiki for more detailed information about getting API credentials for your provider. As there are many DNS providers and API endpoints {pve} automatically generates the form for the credentials for some providers. For the others you will see a bigger text area, simply copy all the credentials `KEY`=`VALUE` pairs in there. DNS Validation through CNAME Alias ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ A special `alias` mode can be used to handle the validation on a different domain/DNS server, in case your primary/real DNS does not support provisioning via an API. Manually set up a permanent `CNAME` record for `_acme-challenge.domain1.example` pointing to `_acme-challenge.domain2.example` and set the `alias` property in the {PVE} node configuration file to `domain2.example` to allow the DNS server of `domain2.example` to validate all challenges for `domain1.example`. Combination of Plugins ^^^^^^^^^^^^^^^^^^^^^^ Combining `http-01` and `dns-01` validation is possible in case your node is reachable via multiple domains with different requirements / DNS provisioning capabilities. Mixing DNS APIs from multiple providers or instances is also possible by specifying different plugin instances per domain. TIP: Accessing the same service over multiple domains increases complexity and should be avoided if possible. [[sysadmin_certs_acme_automatic_renewal]] Automatic renewal of ACME certificates ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If a node has been successfully configured with an ACME-provided certificate (either via pvenode or via the GUI), the certificate will be automatically renewed by the `pve-daily-update.service`. Currently, renewal will be attempted if the certificate has expired already, or will expire in the next 30 days. ACME Examples with `pvenode` ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Example: Sample `pvenode` invocation for using Let's Encrypt certificates ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ---- root@proxmox:~# pvenode acme account register default mail@example.invalid Directory endpoints: 0) Let's Encrypt V2 (https://acme-v02.api.letsencrypt.org/directory) 1) Let's Encrypt V2 Staging (https://acme-staging-v02.api.letsencrypt.org/directory) 2) Custom Enter selection: 1 Terms of Service: https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf Do you agree to the above terms? [y|N]y ... Task OK root@proxmox:~# pvenode config set --acme domains=example.invalid root@proxmox:~# pvenode acme cert order Loading ACME account details Placing ACME order ... Status is 'valid'! All domains validated! ... Downloading certificate Setting pveproxy certificate and key Restarting pveproxy Task OK ---- Example: Setting up the OVH API for validating a domain ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ NOTE: the account registration steps are the same no matter which plugins are used, and are not repeated here. NOTE: `OVH_AK` and `OVH_AS` need to be obtained from OVH according to the OVH API documentation First you need to get all information so you and {pve} can access the API. ---- root@proxmox:~# cat /path/to/api-token OVH_AK=XXXXXXXXXXXXXXXX OVH_AS=YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY root@proxmox:~# source /path/to/api-token root@proxmox:~# curl -XPOST -H"X-Ovh-Application: $OVH_AK" -H "Content-type: application/json" \ https://eu.api.ovh.com/1.0/auth/credential -d '{ "accessRules": [ {"method": "GET","path": "/auth/time"}, {"method": "GET","path": "/domain"}, {"method": "GET","path": "/domain/zone/*"}, {"method": "GET","path": "/domain/zone/*/record"}, {"method": "POST","path": "/domain/zone/*/record"}, {"method": "POST","path": "/domain/zone/*/refresh"}, {"method": "PUT","path": "/domain/zone/*/record/"}, {"method": "DELETE","path": "/domain/zone/*/record/*"} ] }' {"consumerKey":"ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ","state":"pendingValidation","validationUrl":"https://eu.api.ovh.com/auth/?credentialToken=AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA"} (open validation URL and follow instructions to link Application Key with account/Consumer Key) root@proxmox:~# echo "OVH_CK=ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ" >> /path/to/api-token ---- Now you can setup the the ACME plugin: ---- root@proxmox:~# pvenode acme plugin add dns example_plugin --api ovh --data /path/to/api_token root@proxmox:~# pvenode acme plugin config example_plugin ┌────────┬──────────────────────────────────────────┐ │ key │ value │ ╞════════╪══════════════════════════════════════════╡ │ api │ ovh │ ├────────┼──────────────────────────────────────────┤ │ data │ OVH_AK=XXXXXXXXXXXXXXXX │ │ │ OVH_AS=YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY │ │ │ OVH_CK=ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ │ ├────────┼──────────────────────────────────────────┤ │ digest │ 867fcf556363ca1bea866863093fcab83edf47a1 │ ├────────┼──────────────────────────────────────────┤ │ plugin │ example_plugin │ ├────────┼──────────────────────────────────────────┤ │ type │ dns │ └────────┴──────────────────────────────────────────┘ ---- At last you can configure the domain you want to get certitficates for and place the certificate order for it: ---- root@proxmox:~# pvenode config set -acmedomain0 example.proxmox.com,plugin=example_plugin root@proxmox:~# pvenode acme cert order Loading ACME account details Placing ACME order Order URL: https://acme-staging-v02.api.letsencrypt.org/acme/order/11111111/22222222 Getting authorization details from 'https://acme-staging-v02.api.letsencrypt.org/acme/authz-v3/33333333' The validation for example.proxmox.com is pending! [Wed Apr 22 09:25:30 CEST 2020] Using OVH endpoint: ovh-eu [Wed Apr 22 09:25:30 CEST 2020] Checking authentication [Wed Apr 22 09:25:30 CEST 2020] Consumer key is ok. [Wed Apr 22 09:25:31 CEST 2020] Adding record [Wed Apr 22 09:25:32 CEST 2020] Added, sleep 10 seconds. Add TXT record: _acme-challenge.example.proxmox.com Triggering validation Sleeping for 5 seconds Status is 'valid'! [Wed Apr 22 09:25:48 CEST 2020] Using OVH endpoint: ovh-eu [Wed Apr 22 09:25:48 CEST 2020] Checking authentication [Wed Apr 22 09:25:48 CEST 2020] Consumer key is ok. Remove TXT record: _acme-challenge.example.proxmox.com All domains validated! Creating CSR Checking order status Order is ready, finalizing order valid! Downloading certificate Setting pveproxy certificate and key Restarting pveproxy Task OK ---- [[sysadmin_certs_acme_switch_from_staging]] Example: Switching from the `staging` to the regular ACME directory ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Changing the ACME directory for an account is unsupported, but as {pve} supports more than one account you can just create a new one with the production (trusted) ACME directory as endpoint. You can also deactivate the staging account and recreate it. // TODO: add example with account screenshot here .Example: Changing the `default` ACME account from `staging` to directory using `pvenode` ---- root@proxmox:~# pvenode acme account deactivate default Renaming account file from '/etc/pve/priv/acme/default' to '/etc/pve/priv/acme/_deactivated_default_4' Task OK root@proxmox:~# pvenode acme account register default example@proxmox.com Directory endpoints: 0) Let's Encrypt V2 (https://acme-v02.api.letsencrypt.org/directory) 1) Let's Encrypt V2 Staging (https://acme-staging-v02.api.letsencrypt.org/directory) 2) Custom Enter selection: 0 Terms of Service: https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf Do you agree to the above terms? [y|N]y ... Task OK ----