[[chapter_pveceph]] ifdef::manvolnum[] pveceph(1) ========== :pve-toplevel: NAME ---- pveceph - Manage Ceph Services on Proxmox VE Nodes SYNOPSIS -------- include::pveceph.1-synopsis.adoc[] DESCRIPTION ----------- endif::manvolnum[] ifndef::manvolnum[] pveceph - Manage Ceph Services on Proxmox VE Nodes ================================================== endif::manvolnum[] It is possible to install the {ceph} storage server directly on the Proxmox VE cluster nodes. The VMs and Containers can access that storage using the xref:ceph_rados_block_devices[Ceph RADOS Block Devices (RBD)] storage driver. To simplify management, we provide 'pveceph' - a tool to install and manage {ceph} services on {pve} nodes. Precondition ------------ There should be at least three (preferably) identical servers for setup which build together a Proxmox Cluster. A 10Gb network is recommmended, exclusively used for Ceph. If there are no 10Gb switches available meshed network is also an option, see {webwiki-url}Full_Mesh_Network_for_Ceph_Server[wiki]. Check also the recommendations from http://docs.ceph.com/docs/jewel/start/hardware-recommendations/[Ceph's website]. Installation of Ceph Packages ----------------------------- On each node run the installation script as follows: [source,bash] ---- pveceph install -version jewel ---- This sets up an `apt` package repository in `/etc/apt/sources.list.d/ceph.list` and installs the required software. Creating initial Ceph configuration ----------------------------------- After installation of packages, you need to create an initial Ceph configuration on just one node, based on your network (`10.10.10.0/24` in the following example) dedicated for Ceph: [source,bash] ---- pveceph init --network 10.10.10.0/24 ---- This creates an initial config at `/etc/pve/ceph.conf`. That file is automatically distributed to all Proxmox VE nodes by using xref:chapter_pmxcfs[pmxcfs]. The command also creates a symbolic link from `/etc/ceph/ceph.conf` pointing to that file. So you can simply run Ceph commands without the need to specify a configuration file. Creating Ceph Monitors ---------------------- On each node where a monitor is requested (three monitors are recommended) create it by using the "Ceph" item in the GUI or run. [source,bash] ---- pveceph createmon ---- Creating Ceph OSDs ------------------ via GUI or via CLI as follows: [source,bash] ---- pveceph createosd /dev/sd[X] ---- If you want to use a dedicated SSD journal disk: NOTE: In order to use a dedicated journal disk (SSD), the disk needs to have a https://en.wikipedia.org/wiki/GUID_Partition_Table[GPT] partition table. You can create this with `gdisk /dev/sd(x)`. If there is no GPT, you cannot select the disk as journal. Currently the journal size is fixed to 5 GB. [source,bash] ---- pveceph createosd /dev/sd[X] -journal_dev /dev/sd[X] ---- Example: Use /dev/sdf as data disk (4TB) and /dev/sdb is the dedicated SSD journal disk. [source,bash] ---- pveceph createosd /dev/sdf -journal_dev /dev/sdb ---- This partitions the disk (data and journal partition), creates filesystems and starts the OSD, afterwards it is running and fully functional. Please create at least 12 OSDs, distributed among your nodes (4 OSDs on each node). It should be noted that this command refuses to initialize disk when it detects existing data. So if you want to overwrite a disk you should remove existing data first. You can do that using: [source,bash] ---- ceph-disk zap /dev/sd[X] ---- You can create OSDs containing both journal and data partitions or you can place the journal on a dedicated SSD. Using a SSD journal disk is highly recommended if you expect good performance. Ceph Pools ---------- The standard installation creates per default the pool 'rbd', additional pools can be created via GUI. Ceph Client ----------- You can then configure {pve} to use such pools to store VM or Container images. Simply use the GUI too add a new `RBD` storage (see section xref:ceph_rados_block_devices[Ceph RADOS Block Devices (RBD)]). You also need to copy the keyring to a predefined location. NOTE: The file name needs to be ` + `.keyring` - `` is the expression after 'rbd:' in `/etc/pve/storage.cfg` which is `my-ceph-storage` in the following example: [source,bash] ---- mkdir /etc/pve/priv/ceph cp /etc/ceph/ceph.client.admin.keyring /etc/pve/priv/ceph/my-ceph-storage.keyring ---- ifdef::manvolnum[] include::pve-copyright.adoc[] endif::manvolnum[]