ifdef::manvolnum[] PVE({manvolnum}) ================ include::attributes.txt[] NAME ---- pvecm - Proxmox VE Cluster Manager SYNOPSYS -------- include::pvecm.1-synopsis.adoc[] DESCRIPTION ----------- endif::manvolnum[] ifndef::manvolnum[] Cluster Manager =============== include::attributes.txt[] endif::manvolnum[] The {PVE} cluster manager 'pvecm' is a tool to create a group of physical servers. Such group is called a *cluster*. We use the http://www.corosync.org[Corosync Cluster Engine] for reliable group communication, and such cluster can consists of up to 32 physical nodes (probably more, dependent on network latency). 'pvecm' can be used to create a new cluster, join nodes to a cluster, leave the cluster, get status information and do various other cluster related tasks. The Proxmox Cluster file system (pmxcfs) is used to transparently distribute the cluster configuration to all cluster nodes. Grouping nodes into a cluster has the following advantages: * Centralized, web based management * Multi-master clusters: Each node can do all management task * Proxmox Cluster file system (pmxcfs): Database-driven file system for storing configuration files, replicated in real-time on all nodes using corosync. * Easy migration of Virtual Machines and Containers between physical hosts * Fast deployment * Cluster-wide services like firewall and HA Requirements ------------ * All nodes must be in the same network as corosync uses IP Multicast to communicate between nodes (also see http://www.corosync.org[Corosync Cluster Engine]). Corosync uses UDP ports 5404 and 5405 for cluster communication. + NOTE: Some switches do not support IP multicast by default and must be manually enabled first. * Date and time have to be synchronized. * SSH tunnel on TCP port 22 between nodes is used. * If you are interested in High Availability, you need to have at least three nodes for reliable quorum. All nodes should have the same version. * We recommend a dedicated NIC for the cluster traffic, especially if you use shared storage. NOTE: It is not possible to mix Proxmox VE 3.x and earlier with Proxmox VE 4.0 cluster nodes. Preparing Nodes --------------- First, install {PVE} on all nodes. Make sure that each node is installed with the final hostname and IP configuration. Changing the hostname and IP is not possible after cluster creation. Currently the cluster creation has to be done on the console, so you need to login via 'ssh'. Create the Cluster ------------------ Login via 'ssh' to the first Proxmox VE node. Use a unique name for your cluster. This name cannot be changed later. hp1# pvecm create YOUR-CLUSTER-NAME CAUTION: The cluster name is used to compute the default multicast address. Please use unique cluster names if you run more than one cluster inside your network. To check the state of your cluster use: hp1# pvecm status Adding Nodes to the Cluster --------------------------- Login via 'ssh' to the node you want to add. hp2# pvecm add IP-ADDRESS-CLUSTER For `IP-ADDRESS-CLUSTER` use the IP from an existing cluster node. CAUTION: A new node cannot hold any VM´s, because you would get conflicts about identical VM IDs. Also, all existing configuration in '/etc/pve' is overwritten when you join a new node to the cluster. To workaround, use vzdump to backup and restore to a different VMID after adding the node to the cluster. To check the state of cluster: # pvecm status .Cluster status after adding 4 nodes ---- hp2# pvecm status Quorum information ~~~~~~~~~~~~~~~~~~ Date: Mon Apr 20 12:30:13 2015 Quorum provider: corosync_votequorum Nodes: 4 Node ID: 0x00000001 Ring ID: 1928 Quorate: Yes Votequorum information ~~~~~~~~~~~~~~~~~~~~~~ Expected votes: 4 Highest expected: 4 Total votes: 4 Quorum: 2 Flags: Quorate Membership information ~~~~~~~~~~~~~~~~~~~~~~ Nodeid Votes Name 0x00000001 1 192.168.15.91 0x00000002 1 192.168.15.92 (local) 0x00000003 1 192.168.15.93 0x00000004 1 192.168.15.94 ---- If you only want the list of all nodes use: # pvecm nodes .List Nodes in a Cluster ---- hp2# pvecm nodes Membership information ~~~~~~~~~~~~~~~~~~~~~~ Nodeid Votes Name 1 1 hp1 2 1 hp2 (local) 3 1 hp3 4 1 hp4 ---- Remove a Cluster Node --------------------- CAUTION: Read carefully the procedure before proceeding, as it could not be what you want or need. Move all virtual machines from the node. Make sure you have no local data or backups you want to keep, or save them accordingly. Log in to one remaining node via ssh. Issue a 'pvecm nodes' command to identify the node ID: ---- hp1# pvecm status Quorum information ~~~~~~~~~~~~~~~~~~ Date: Mon Apr 20 12:30:13 2015 Quorum provider: corosync_votequorum Nodes: 4 Node ID: 0x00000001 Ring ID: 1928 Quorate: Yes Votequorum information ~~~~~~~~~~~~~~~~~~~~~~ Expected votes: 4 Highest expected: 4 Total votes: 4 Quorum: 2 Flags: Quorate Membership information ~~~~~~~~~~~~~~~~~~~~~~ Nodeid Votes Name 0x00000001 1 192.168.15.91 (local) 0x00000002 1 192.168.15.92 0x00000003 1 192.168.15.93 0x00000004 1 192.168.15.94 ---- IMPORTANT: at this point you must power off the node to be removed and make sure that it will not power on again (in the network) as it is. ---- hp1# pvecm nodes Membership information ~~~~~~~~~~~~~~~~~~~~~~ Nodeid Votes Name 1 1 hp1 (local) 2 1 hp2 3 1 hp3 4 1 hp4 ---- Log in to one remaining node via ssh. Issue the delete command (here deleting node hp4): hp1# pvecm delnode hp4 If the operation succeeds no output is returned, just check the node list again with 'pvecm nodes' or 'pvecm status'. You should see something like: ---- hp1# pvecm status Quorum information ~~~~~~~~~~~~~~~~~~ Date: Mon Apr 20 12:44:28 2015 Quorum provider: corosync_votequorum Nodes: 3 Node ID: 0x00000001 Ring ID: 1992 Quorate: Yes Votequorum information ~~~~~~~~~~~~~~~~~~~~~~ Expected votes: 3 Highest expected: 3 Total votes: 3 Quorum: 3 Flags: Quorate Membership information ~~~~~~~~~~~~~~~~~~~~~~ Nodeid Votes Name 0x00000001 1 192.168.15.90 (local) 0x00000002 1 192.168.15.91 0x00000003 1 192.168.15.92 ---- IMPORTANT: as said above, it is very important to power off the node *before* removal, and make sure that it will *never* power on again (in the existing cluster network) as it is. If you power on the node as it is, your cluster will be screwed up and it could be difficult to restore a clean cluster state. If, for whatever reason, you want that this server joins the same cluster again, you have to * reinstall pve on it from scratch * then join it, as explained in the previous section. Quorum ------ {pve} use a quorum-based technique to provide a consistent state among all cluster nodes. [quote, from Wikipedia, Quorum (distributed computing)] ____ A quorum is the minimum number of votes that a distributed transaction has to obtain in order to be allowed to perform an operation in a distributed system. ____ In case of network partitioning, state changes requires that a majority of nodes are online. The cluster switches to read-only mode if it loose quorum. NOTE: {pve} assigns a single vote to each node by default. Cluster Cold Start ------------------ It is obvious that a cluster is not quorate when all nodes are offline. This is a common case after a power failure. NOTE: It is always a good idea to use an uninterruptible power supply ('UPS', also called 'battery backup') to avoid this state. Especially if you want HA. On node startup, service 'pve-manager' waits up to 60 seconds to reach quorum, and then starts all guests. If it fails to get quorum, that service simply aborts, and you need to start your guest manually once you have quorum. If you start all nodes at the same time (for example when power comes back), it is likely that you reach quorum within above timeout. But startup can fail if some nodes starts much faster than others, so you need to start your guest manually after reaching quorum. You can do that on the GUI, or on the command line with: systemctl start pve-manager ifdef::manvolnum[] include::pve-copyright.adoc[] endif::manvolnum[]