include::attributes.txt[]
endif::manvolnum[]
-'ha-manager' handles management of user-defined cluster services. This
-includes handling of user requests including service start, service
-disable, service relocate, and service restart. The cluster resource
-manager daemon also handles restarting and relocating services in the
-event of failures.
-HOW IT WORKS
+Our modern society depends heavily on information provided by
+computers over the network. Mobile devices amplified that dependency,
+because people can access the network any time from anywhere. If you
+provide such services, it is very important that they are available
+most of the time.
+
+We can mathematically define the availability as the ratio of (A) the
+total time a service is capable of being used during a given interval
+to (B) the length of the interval. It is normally expressed as a
+percentage of uptime in a given year.
+
+.Availability - Downtime per Year
+[width="60%",cols="<d,d",options="header"]
+|===========================================================
+|Availability % |Downtime per year
+|99 |3.65 days
+|99.9 |8.76 hours
+|99.99 |52.56 minutes
+|99.999 |5.26 minutes
+|99.9999 |31.5 seconds
+|99.99999 |3.15 seconds
+|===========================================================
+
+There are several ways to increase availability. The most elegant
+solution is to rewrite your software, so that you can run it on
+several host at the same time. The software itself need to have a way
+to detect errors and do failover. This is relatively easy if you just
+want to serve read-only web pages. But in general this is complex, and
+sometimes impossible because you cannot modify the software
+yourself. The following solutions works without modifying the
+software:
+
+* Use reliable "server" components
+
+NOTE: Computer components with same functionality can have varying
+reliability numbers, depending on the component quality. Most vendors
+sell components with higher reliability as "server" components -
+usually at higher price.
+
+* Eliminate single point of failure (redundant components)
+
+ - use an uninterruptible power supply (UPS)
+ - use redundant power supplies on the main boards
+ - use ECC-RAM
+ - use redundant network hardware
+ - use RAID for local storage
+ - use distributed, redundant storage for VM data
+
+* Reduce downtime
+
+ - rapidly accessible administrators (24/7)
+ - availability of spare parts (other nodes in a {pve} cluster)
+ - automatic error detection ('ha-manager')
+ - automatic failover ('ha-manager')
+
+Virtualization environments like {pve} makes it much easier to reach
+high availability because they remove the "hardware" dependency. They
+also support to setup and use redundant storage and network
+devices. So if one host fail, you can simply start those services on
+another host within your cluster.
+
+Even better, {pve} provides a software stack called 'ha-manager',
+which can do that automatically for you. It is able to automatically
+detect errors and do automatic failover.
+
+{pve} 'ha-manager' works like an "automated" administrator. First, you
+configure what resources (VMs, containers, ...) it should
+manage. 'ha-manager' then observes correct functionality, and handles
+service failover to another node in case of errors. 'ha-manager' can
+also handle normal user requests which may start, stop, relocate and
+migrate a service.
+
+But high availability comes at a price. High quality components are
+more expensive, and making them redundant duplicates the costs at
+least. Additional spare parts increase costs further. So you should
+carefully calculate the benefits, and compare with those additional
+costs.
+
+TIP: Increasing availability from 99% to 99.9% is relatively
+simply. But increasing availability from 99.9999% to 99.99999% is very
+hard and costly. 'ha-manager' has typical error detection and failover
+times of about 2 minutes, so you can get no more than 99.999%
+availability.
+
+Requirements
------------
+* at least three cluster nodes (to get reliable quorum)
+
+* shared storage for VMs and containers
+
+* hardware redundancy (everywhere)
+
+* hardware watchdog - if not available we fall back to the
+ linux kernel software watchdog ('softdog')
+
+* optional hardware fencing devices
+
+
+Resources
+---------
+
+We call the primary management unit handled by 'ha-manager' a
+resource. A resource (also called "service") is uniquely
+identified by a service ID (SID), which consists of the resource type
+and an type specific ID, e.g.: 'vm:100'. That example would be a
+resource of type 'vm' (virtual machine) with the ID 100.
+
+For now we have two important resources types - virtual machines and
+containers. One basic idea here is that we can bundle related software
+into such VM or container, so there is no need to compose one big
+service from other services, like it was done with 'rgmanager'. In
+general, a HA enabled resource should not depend on other resources.
+
+
+How It Works
+------------
+
+This section provides an in detail description of the {PVE} HA-manager
+internals. It describes how the CRM and the LRM work together.
+
+To provide High Availability two daemons run on each node:
+
+'pve-ha-lrm'::
+
+The local resource manager (LRM), it controls the services running on
+the local node.
+It reads the requested states for its services from the current manager
+status file and executes the respective commands.
+
+'pve-ha-crm'::
+
+The cluster resource manager (CRM), it controls the cluster wide
+actions of the services, processes the LRM results and includes the state
+machine which controls the state of each service.
+
+.Locks in the LRM & CRM
+[NOTE]
+Locks are provided by our distributed configuration file system (pmxcfs).
+They are used to guarantee that each LRM is active and working as a
+LRM only executes actions when he has its lock we can mark a failed node
+as fenced if we get its lock. This lets us then recover the failed HA services
+securely without the failed (but maybe still running) LRM interfering.
+This all gets supervised by the CRM which holds currently the manager master
+lock.
+
+Local Resource Manager
+~~~~~~~~~~~~~~~~~~~~~~
+
The local resource manager ('pve-ha-lrm') is started as a daemon on
-each node at system start and waits until the HA cluster is quorate
-and locks are working. After initialization, the LRM determines which
-services are enabled and starts them. Also the watchdog gets
-initialized.
+boot and waits until the HA cluster is quorate and thus cluster wide
+locks are working.
+
+It can be in three states:
+
+* *wait for agent lock*: the LRM waits for our exclusive lock. This is
+ also used as idle sate if no service is configured
+* *active*: the LRM holds its exclusive lock and has services configured
+* *lost agent lock*: the LRM lost its lock, this means a failure happened
+ and quorum was lost.
+
+After the LRM gets in the active state it reads the manager status
+file in '/etc/pve/ha/manager_status' and determines the commands it
+has to execute for the services it owns.
+For each command a worker gets started, this workers are running in
+parallel and are limited to maximal 4 by default. This default setting
+may be changed through the datacenter configuration key "max_worker".
+When finished the worker process gets collected and its result saved for
+the CRM.
+
+.Maximal Concurrent Worker Adjustment Tips
+[NOTE]
+The default value of 4 maximal concurrent Workers may be unsuited for
+a specific setup. For example may 4 live migrations happen at the same
+time, which can lead to network congestions with slower networks and/or
+big (memory wise) services. Ensure that also in the worst case no congestion
+happens and lower the "max_worker" value if needed. In the contrary, if you
+have a particularly powerful high end setup you may also want to increase it.
+
+Each command requested by the CRM is uniquely identifiable by an UID, when
+the worker finished its result will be processed and written in the LRM
+status file '/etc/pve/nodes/<nodename>/lrm_status'. There the CRM may collect
+it and let its state machine - respective the commands output - act on it.
+
+The actions on each service between CRM and LRM are normally always synced.
+This means that the CRM requests a state uniquely marked by an UID, the LRM
+then executes this action *one time* and writes back the result, also
+identifiable by the same UID. This is needed so that the LRM does not
+executes an outdated command.
+With the exception of the 'stop' and the 'error' command,
+those two do not depend on the result produce and are executed
+always in the case of the stopped state and once in the case of
+the error state.
+
+.Read the Logs
+[NOTE]
+The HA Stack logs every action it makes. This helps to understand what
+and also why something happens in the cluster. Here its important to see
+what both daemons, the LRM and the CRM, did. You may use
+`journalctl -u pve-ha-lrm` on the node(s) where the service is and
+the same command for the pve-ha-crm on the node which is the current master.
+
+Cluster Resource Manager
+~~~~~~~~~~~~~~~~~~~~~~~~
The cluster resource manager ('pve-ha-crm') starts on each node and
waits there for the manager lock, which can only be held by one node
at a time. The node which successfully acquires the manager lock gets
-promoted to the CRM, it handles cluster wide actions like migrations
-and failures.
+promoted to the CRM master.
+
+It can be in three states:
+
+* *wait for agent lock*: the LRM waits for our exclusive lock. This is
+ also used as idle sate if no service is configured
+* *active*: the LRM holds its exclusive lock and has services configured
+* *lost agent lock*: the LRM lost its lock, this means a failure happened
+ and quorum was lost.
+
+It main task is to manage the services which are configured to be highly
+available and try to always enforce them to the wanted state, e.g.: a
+enabled service will be started if its not running, if it crashes it will
+be started again. Thus it dictates the LRM the actions it needs to execute.
When an node leaves the cluster quorum, its state changes to unknown.
If the current CRM then can secure the failed nodes lock, the services
When a cluster member determines that it is no longer in the cluster
quorum, the LRM waits for a new quorum to form. As long as there is no
quorum the node cannot reset the watchdog. This will trigger a reboot
-after 60 seconds.
+after the watchdog then times out, this happens after 60 seconds.
-CONFIGURATION
+Configuration
-------------
-The HA stack is well integrated int the Proxmox VE API2. So, for
+The HA stack is well integrated in the Proxmox VE API2. So, for
example, HA can be configured via 'ha-manager' or the PVE web
interface, which both provide an easy to use tool.
'/etc/pve/ha/groups.cfg'. Use the provided tools to make changes,
there shouldn't be any need to edit them manually.
-RESOURCES/SERVICES AGENTS
--------------------------
+Node Power Status
+-----------------
+
+If a node needs maintenance you should migrate and or relocate all
+services which are required to run always on another node first.
+After that you can stop the LRM and CRM services. But note that the
+watchdog triggers if you stop it with active services.
+
+Updates
+~~~~~~~
+When updating the ha-manager you should do one node after the other, never
+all at once. Further you have to ensure that no service located at the node
+is in the error state, a node with erroneous service is not able to be upgraded
+and if tried nonetheless it may even trigger a Node reset when doing so!
+When dealing with erroneous services first check what happened to them, then
+bring them in a secure state, after that disable or remove them from HA.
+Only after that you may start upgrading a Nodes LRM and CRM.
+
+Fencing
+-------
+
+What Is Fencing
+~~~~~~~~~~~~~~~
+
+Fencing secures that on a node failure the dangerous node gets will be rendered
+unable to do any damage and that no resource runs twice when it gets recovered
+from the failed node.
+
+Configure Hardware Watchdog
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+By default all watchdog modules are blocked for security reasons as they are
+like a loaded gun if not correctly initialized.
+If you have a hardware watchdog available remove its module from the blacklist
+and restart 'the watchdog-mux' service.
-A resource or also called service can be managed by the
-ha-manager. Currently we support virtual machines and container.
-GROUPS
+Groups
------
A group is a collection of cluster nodes which a service may be bound to.
-GROUP SETTINGS
+Group Settings
~~~~~~~~~~~~~~
nodes::
(re)joins the cluster.
-RECOVERY POLICY
+Recovery Policy
---------------
There are two service recover policy settings which can be configured
A relocate only happens after the max_restart value is exceeded on the
actual node. The default is set to one.
-Note that the relocate count state will only reset to zero when the
+NOTE: The relocate count state will only reset to zero when the
service had at least one successful start. That means if a service is
re-enabled without fixing the error only the restart policy gets
repeated.
-ERROR RECOVERY
+Error Recovery
--------------
If after all tries the service state could not be recovered it gets
* *after* you fixed all errors you may enable the service again
-SERVICE OPERATIONS
+Service Operations
------------------
This are how the basic user-initiated service operations (via
service state (enabled, disabled).
-SERVICE STATES
+Service States
--------------
stopped::
projects / pve-docs.git / blobdiff