ifdef::manvolnum[]
-PVE({manvolnum})
-================
+PVE(8)
+======
include::attributes.txt[]
+:pve-toplevel:
+
NAME
----
pve-firewall - PVE Firewall Daemon
-SYNOPSYS
+SYNOPSIS
--------
include::pve-firewall.8-synopsis.adoc[]
include::attributes.txt[]
endif::manvolnum[]
-Proxmox VE Firewall provides an easy way to protect your IT
+ifdef::wiki[]
+:pve-toplevel:
+:title: Firewall
+endif::wiki[]
+
+{pve} Firewall provides an easy way to protect your IT
infrastructure. You can setup firewall rules for all hosts
inside a cluster, or define rules for virtual machines and
containers. Features like firewall macros, security groups, IP sets
----
-Avoiding `link-local` Addresses on `tap` and `veth` Devices
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-With IPv6 enabled by default every interface gets a MAC-derived link local
-address. However, most devices on a typical {pve} setup are connected to a
-bridge and so the bridge is the only interface which really needs one.
-
-To disable a link local address on an interface you can set the interface's
-`disable_ipv6` sysconf variable. Despite the name, this does not prevent IPv6
-traffic from passing through the interface when routing or bridging, so the
-only noticeable effect will be the removal of the link local address.
-
-The easiest method of achieving this setting for all newly started VMs is to
-set it for the `default` interface configuration and enabling it explicitly on
-the interfaces which need it. This is also the case for other settings such as
-`forwarding`, `accept_ra` or `autoconf`.
-
-Here's a possible setup:
-----
-# /etc/sysconf.d/90-ipv6.conf
-
-net.ipv6.conf.default.forwarding = 0
-net.ipv6.conf.default.proxy_ndp = 0
-net.ipv6.conf.default.autoconf = 0
-net.ipv6.conf.default.disable_ipv6 = 1
-net.ipv6.conf.default.accept_ra = 0
-
-net.ipv6.conf.lo.disable_ipv6 = 0
-----
-
-----
-# /etc/network/interfaces
-(...)
-# Dual stack:
-iface vmbr0 inet static
- address 1.2.3.4
- netmask 255.255.255.128
- gateway 1.2.3.5
-iface vmbr0 inet6 static
- address fc00::31
- netmask 16
- gateway fc00::1
- accept_ra 0
- pre-up echo 0 > /proc/sys/net/ipv6/conf/$IFACE/disable_ipv6
-
-# With IPv6-only 'pre-up' is too early and 'up' is too late.
-# Work around this by creating the bridge manually
-iface vmbr1 inet manual
- pre-up ip link add $IFACE type bridge
- up echo 0 > /proc/sys/net/ipv6/conf/$IFACE/disable_ipv6
-iface vmbr1 inet6 static
- address fc00:b:3::1
- netmask 96
- bridge_ports none
- bridge_stp off
- bridge_fd 0
- bridge_vlan_aware yes
- accept_ra 0
-(...)
-----
-
-
Notes on IPv6
-------------
<<ipfilter-section,Standard IP set `ipfilter-net*`>> section for details.)
-Ports used by Proxmox VE
-------------------------
+Ports used by {pve}
+-------------------
* Web interface: 8006
* VNC Web console: 5900-5999