update copyright year to current

[pve-docs.git] / pvecm.adoc

diff --git a/pvecm.adoc b/pvecm.adoc
index 7c786bc99f7f158f442c05becf10458623be6ab6..3d62c0b6be5dafce2c3d8e27a352bb2ea62243d9 100644 (file)
--- a/pvecm.adoc
+++ b/pvecm.adoc
@@ -77,8 +77,12 @@ manually enabled first.
 
 * Root password of a cluster node is required for adding nodes.
 
-NOTE: It is not possible to mix Proxmox VE 3.x and earlier with
-Proxmox VE 4.0 cluster nodes.
+NOTE: It is not possible to mix {pve} 3.x and earlier with {pve} 4.X cluster
+nodes.
+
+NOTE: While it's possible for {pve} 4.4 and {pve} 5.0 this is not supported as
+production configuration and should only used temporarily during upgrading the
+whole cluster from one to another major version.
 
 
 Preparing Nodes
@@ -88,24 +92,37 @@ First, install {PVE} on all nodes. Make sure that each node is
 installed with the final hostname and IP configuration. Changing the
 hostname and IP is not possible after cluster creation.
 
-Currently the cluster creation can either be done on the console(login via `ssh`) or the GUI.
+Currently the cluster creation can either be done on the console (login via
+`ssh`) or the API, which we have a GUI implementation for (__Datacenter ->
+Cluster__).
+
+While it's often common use to reference all other nodenames in `/etc/hosts`
+with their IP this is not strictly necessary for a cluster, which normally uses
+multicast, to work. It maybe useful as you then can connect from one node to
+the other with SSH through the easier to remember node name.
 
 [[pvecm_create_cluster]]
 Create the Cluster
 ------------------
 
 Login via `ssh` to the first {pve} node. Use a unique name for your cluster.
-This name cannot be changed later. The cluster name follows the same rules as node names.
+This name cannot be changed later. The cluster name follows the same rules as
+node names.
 
- hp1# pvecm create YOUR-CLUSTER-NAME
+----
+ hp1# pvecm create CLUSTERNAME
+----
 
-CAUTION: The cluster name is used to compute the default multicast
-address. Please use unique cluster names if you run more than one
-cluster inside your network.
+CAUTION: The cluster name is used to compute the default multicast address.
+Please use unique cluster names if you run more than one cluster inside your
+network. To avoid human confusion, it is also recommended to choose different
+names even if clusters do not share the cluster network.
 
 To check the state of your cluster use:
 
+----
  hp1# pvecm status
+----
 
 Multiple Clusters In Same Network
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -128,7 +145,9 @@ Adding Nodes to the Cluster
 
 Login via `ssh` to the node you want to add.
 
+----
  hp2# pvecm add IP-ADDRESS-CLUSTER
+----
 
 For `IP-ADDRESS-CLUSTER` use the IP from an existing cluster node.
 
@@ -140,7 +159,9 @@ adding the node to the cluster.
 
 To check the state of cluster:
 
+----
  # pvecm status
+----
 
 .Cluster status after adding 4 nodes
 ----
@@ -173,7 +194,9 @@ Membership information
 
 If you only want the list of all nodes use:
 
+----
  # pvecm nodes
+----
 
 .List nodes in a cluster
 ----
@@ -242,7 +265,9 @@ it could be difficult to restore a clean cluster state.
 
 After powering off the node hp4, we can safely remove it from the cluster.
 
+----
  hp1# pvecm delnode hp4
+----
 
 If the operation succeeds no output is returned, just check the node
 list again with `pvecm nodes` or `pvecm status`. You should see