ifdef::manvolnum[]
pvecm(1)
========
-include::attributes.txt[]
:pve-toplevel:
NAME
ifndef::manvolnum[]
Cluster Manager
===============
-include::attributes.txt[]
:pve-toplevel:
endif::manvolnum[]
Move all virtual machines from the node. Make sure you have no local
data or backups you want to keep, or save them accordingly.
+In the following example we will remove the node hp4 from the cluster.
-Log in to one remaining node via ssh. Issue a `pvecm nodes` command to
-identify the node ID:
-
-----
-hp1# pvecm status
-
-Quorum information
-~~~~~~~~~~~~~~~~~~
-Date: Mon Apr 20 12:30:13 2015
-Quorum provider: corosync_votequorum
-Nodes: 4
-Node ID: 0x00000001
-Ring ID: 1928
-Quorate: Yes
-
-Votequorum information
-~~~~~~~~~~~~~~~~~~~~~~
-Expected votes: 4
-Highest expected: 4
-Total votes: 4
-Quorum: 2
-Flags: Quorate
-
-Membership information
-~~~~~~~~~~~~~~~~~~~~~~
- Nodeid Votes Name
-0x00000001 1 192.168.15.91 (local)
-0x00000002 1 192.168.15.92
-0x00000003 1 192.168.15.93
-0x00000004 1 192.168.15.94
-----
-
-IMPORTANT: at this point you must power off the node to be removed and
-make sure that it will not power on again (in the network) as it
-is.
+Log in to a *different* cluster node (not hp4), and issue a `pvecm nodes`
+command to identify the node ID to remove:
----
hp1# pvecm nodes
4 1 hp4
----
-Log in to one remaining node via ssh. Issue the delete command (here
-deleting node `hp4`):
+
+At this point you must power off hp4 and
+make sure that it will not power on again (in the network) as it
+is.
+
+IMPORTANT: As said above, it is critical to power off the node
+*before* removal, and make sure that it will *never* power on again
+(in the existing cluster network) as it is.
+If you power on the node as it is, your cluster will be screwed up and
+it could be difficult to restore a clean cluster state.
+
+After powering off the node hp4, we can safely remove it from the cluster.
hp1# pvecm delnode hp4
0x00000003 1 192.168.15.92
----
-IMPORTANT: as said above, it is very important to power off the node
-*before* removal, and make sure that it will *never* power on again
-(in the existing cluster network) as it is.
-
-If you power on the node as it is, your cluster will be screwed up and
-it could be difficult to restore a clean cluster state.
-
If, for whatever reason, you want that this server joins the same
cluster again, you have to
scratch. But after removing the node from the cluster it will still have
access to the shared storages! This must be resolved before you start removing
the node from the cluster. A {pve} cluster cannot share the exact same
-storage with another cluster, as it leads to VMID conflicts.
+storage with another cluster, as storage locking doesn't work over cluster
+boundary. Further, it may also lead to VMID conflicts.
Its suggested that you create a new storage where only the node which you want
to separate has access. This can be an new export on your NFS or a new Ceph
* Ensure that multicast works in general and a high package rates. This can be
done with the `omping` tool. The final "%loss" number should be < 1%.
++
[source,bash]
----
omping -c 10000 -i 0.001 -F -q NODE1-IP NODE2-IP ...
This covers up problems where IGMP snooping is activated on the network but
no multicast querier is active. This test has a duration of around 10
minutes.
++
[source,bash]
----
omping -c 600 -i 1 -q NODE1-IP NODE2-IP ...
-bindnet1_addr 10.10.20.1 -ring1_addr 10.10.20.1
----
-RRP On A Created Cluster
+RRP On Existing Clusters
~~~~~~~~~~~~~~~~~~~~~~~~
-When enabling an already running cluster to use RRP you will take similar steps
-as describe in <<separate-cluster-net-after-creation,separating the cluster
-network>>. You just do it on another ring.
+You will take similar steps as described in
+<<separate-cluster-net-after-creation,separating the cluster network>> to
+enable RRP on an already running cluster. The single difference is, that you
+will add `ring1` and use it instead of `ring0`.
First add a new `interface` subsection in the `totem` section, set its
`ringnumber` property to `1`. Set the interfaces `bindnetaddr` property to an
----
-Bring it in effect like described in the <<edit-corosync-conf,edit the
-corosync.conf file>> section.
+Bring it in effect like described in the
+<<edit-corosync-conf,edit the corosync.conf file>> section.
This is a change which cannot take live in effect and needs at least a restart
of corosync. Recommended is a restart of the whole cluster.
mind that guest startup is delayed until you reach quorum.
+Guest Migration
+---------------
+
+Migrating virtual guests to other nodes is a useful feature in a
+cluster. There are settings to control the behavior of such
+migrations. This can be done via the configuration file
+`datacenter.cfg` or for a specific migration via API or command line
+parameters.
+
+It makes a difference if a Guest is online or offline, or if it has
+local resources (like a local disk).
+
+For Details about Virtual Machine Migration see the
+xref:qm_migration[QEMU/KVM Migration Chapter]
+
+For Details about Container Migration see the
+xref:pct_migration[Container Migration Chapter]
+
+Migration Type
+~~~~~~~~~~~~~~
+
+The migration type defines if the migration data should be sent over a
+encrypted (`secure`) channel or an unencrypted (`insecure`) one.
+Setting the migration type to insecure means that the RAM content of a
+virtual guest gets also transfered unencrypted, which can lead to
+information disclosure of critical data from inside the guest (for
+example passwords or encryption keys).
+
+Therefore, we strongly recommend using the secure channel if you do
+not have full control over the network and can not guarantee that no
+one is eavesdropping to it.
+
+NOTE: Storage migration does not follow this setting. Currently, it
+always sends the storage content over a secure channel.
+
+Encryption requires a lot of computing power, so this setting is often
+changed to "unsafe" to achieve better performance. The impact on
+modern systems is lower because they implement AES encryption in
+hardware. The performance impact is particularly evident in fast
+networks where you can transfer 10 Gbps or more.
+
+
+Migration Network
+~~~~~~~~~~~~~~~~~
+
+By default, {pve} uses the network in which cluster communication
+takes place to send the migration traffic. This is not optimal because
+sensitive cluster traffic can be disrupted and this network may not
+have the best bandwidth available on the node.
+
+Setting the migration network parameter allows the use of a dedicated
+network for the entire migration traffic. In addition to the memory,
+this also affects the storage traffic for offline migrations.
+
+The migration network is set as a network in the CIDR notation. This
+has the advantage that you do not have to set individual IP addresses
+for each node. {pve} can determine the real address on the
+destination node from the network specified in the CIDR form. To
+enable this, the network must be specified so that each node has one,
+but only one IP in the respective network.
+
+
+Example
+^^^^^^^
+
+We assume that we have a three-node setup with three separate
+networks. One for public communication with the Internet, one for
+cluster communication and a very fast one, which we want to use as a
+dedicated network for migration.
+
+A network configuration for such a setup might look as follows:
+
+----
+iface eth0 inet manual
+
+# public network
+auto vmbr0
+iface vmbr0 inet static
+ address 192.X.Y.57
+ netmask 255.255.250.0
+ gateway 192.X.Y.1
+ bridge_ports eth0
+ bridge_stp off
+ bridge_fd 0
+
+# cluster network
+auto eth1
+iface eth1 inet static
+ address 10.1.1.1
+ netmask 255.255.255.0
+
+# fast network
+auto eth2
+iface eth2 inet static
+ address 10.1.2.1
+ netmask 255.255.255.0
+----
+
+Here, we will use the network 10.1.2.0/24 as a migration network. For
+a single migration, you can do this using the `migration_network`
+parameter of the command line tool:
+
+----
+# qm migrate 106 tre --online --migration_network 10.1.2.0/24
+----
+
+To configure this as the default network for all migrations in the
+cluster, set the `migration` property of the `/etc/pve/datacenter.cfg`
+file:
+
+----
+# use dedicated migration network
+migration: secure,network=10.1.2.0/24
+----
+
+NOTE: The migration type must always be set when the migration network
+gets set in `/etc/pve/datacenter.cfg`.
+
+
ifdef::manvolnum[]
include::pve-copyright.adoc[]
endif::manvolnum[]
projects / pve-docs.git / blobdiff