ifdef::manvolnum[]
-PVE({manvolnum})
-================
-include::attributes.txt[]
+pvecm(1)
+========
+:pve-toplevel:
NAME
----
ifndef::manvolnum[]
Cluster Manager
===============
-include::attributes.txt[]
+:pve-toplevel:
endif::manvolnum[]
The {PVE} cluster manager `pvecm` is a tool to create a group of
Move all virtual machines from the node. Make sure you have no local
data or backups you want to keep, or save them accordingly.
+In the following example we will remove the node hp4 from the cluster.
-Log in to one remaining node via ssh. Issue a `pvecm nodes` command to
-identify the node ID:
-
-----
-hp1# pvecm status
-
-Quorum information
-~~~~~~~~~~~~~~~~~~
-Date: Mon Apr 20 12:30:13 2015
-Quorum provider: corosync_votequorum
-Nodes: 4
-Node ID: 0x00000001
-Ring ID: 1928
-Quorate: Yes
-
-Votequorum information
-~~~~~~~~~~~~~~~~~~~~~~
-Expected votes: 4
-Highest expected: 4
-Total votes: 4
-Quorum: 2
-Flags: Quorate
-
-Membership information
-~~~~~~~~~~~~~~~~~~~~~~
- Nodeid Votes Name
-0x00000001 1 192.168.15.91 (local)
-0x00000002 1 192.168.15.92
-0x00000003 1 192.168.15.93
-0x00000004 1 192.168.15.94
-----
-
-IMPORTANT: at this point you must power off the node to be removed and
-make sure that it will not power on again (in the network) as it
-is.
+Log in to a *different* cluster node (not hp4), and issue a `pvecm nodes`
+command to identify the node ID to remove:
----
hp1# pvecm nodes
4 1 hp4
----
-Log in to one remaining node via ssh. Issue the delete command (here
-deleting node `hp4`):
+
+At this point you must power off hp4 and
+make sure that it will not power on again (in the network) as it
+is.
+
+IMPORTANT: As said above, it is critical to power off the node
+*before* removal, and make sure that it will *never* power on again
+(in the existing cluster network) as it is.
+If you power on the node as it is, your cluster will be screwed up and
+it could be difficult to restore a clean cluster state.
+
+After powering off the node hp4, we can safely remove it from the cluster.
hp1# pvecm delnode hp4
0x00000003 1 192.168.15.92
----
-IMPORTANT: as said above, it is very important to power off the node
-*before* removal, and make sure that it will *never* power on again
-(in the existing cluster network) as it is.
-
-If you power on the node as it is, your cluster will be screwed up and
-it could be difficult to restore a clean cluster state.
-
If, for whatever reason, you want that this server joins the same
cluster again, you have to
* then join it, as explained in the previous section.
+[[pvecm_separate_node_without_reinstall]]
Separate A Node Without Reinstalling
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~
When enabling an already running cluster to use RRP you will take similar steps
-as describe in <<separate-cluster-net-after-creation,separating the cluster
-network>>. You just do it on another ring.
+as describe in
+<<separate-cluster-net-after-creation,separating the cluster network>>. You
+just do it on another ring.
First add a new `interface` subsection in the `totem` section, set its
`ringnumber` property to `1`. Set the interfaces `bindnetaddr` property to an
----
-Bring it in effect like described in the <<edit-corosync-conf,edit the
-corosync.conf file>> section.
+Bring it in effect like described in the
+<<edit-corosync-conf,edit the corosync.conf file>> section.
This is a change which cannot take live in effect and needs at least a restart
of corosync. Recommended is a restart of the whole cluster.
mind that guest startup is delayed until you reach quorum.
+Guest Migration
+---------------
+
+Migrating virtual guests to other nodes is a useful feature in a
+cluster. There are settings to control the behavior of such
+migrations. This can be done via the configuration file
+`datacenter.cfg` or for a specific migration via API or command line
+parameters.
+
+
+Migration Type
+~~~~~~~~~~~~~~
+
+The migration type defines if the migration data should be sent over a
+encrypted (`secure`) channel or an unencrypted (`insecure`) one.
+Setting the migration type to insecure means that the RAM content of a
+virtual guest gets also transfered unencrypted, which can lead to
+information disclosure of critical data from inside the guest (for
+example passwords or encryption keys).
+
+Therefore, we strongly recommend using the secure channel if you do
+not have full control over the network and can not guarantee that no
+one is eavesdropping to it.
+
+NOTE: Storage migration does not follow this setting. Currently, it
+always sends the storage content over a secure channel.
+
+Encryption requires a lot of computing power, so this setting is often
+changed to "unsafe" to achieve better performance. The impact on
+modern systems is lower because they implement AES encryption in
+hardware. The performance impact is particularly evident in fast
+networks where you can transfer 10 Gbps or more.
+
+
+Migration Network
+~~~~~~~~~~~~~~~~~
+
+By default, {pve} uses the network in which cluster communication
+takes place to send the migration traffic. This is not optimal because
+sensitive cluster traffic can be disrupted and this network may not
+have the best bandwidth available on the node.
+
+Setting the migration network parameter allows the use of a dedicated
+network for the entire migration traffic. In addition to the memory,
+this also affects the storage traffic for offline migrations.
+
+The migration network is set as a network in the CIDR notation. This
+has the advantage that you do not have to set individual IP addresses
+for each node. {pve} can determine the real address on the
+destination node from the network specified in the CIDR form. To
+enable this, the network must be specified so that each node has one,
+but only one IP in the respective network.
+
+
+Example
+^^^^^^^
+
+We assume that we have a three-node setup with three separate
+networks. One for public communication with the Internet, one for
+cluster communication and a very fast one, which we want to use as a
+dedicated network for migration.
+
+A network configuration for such a setup might look as follows:
+
+----
+iface eth0 inet manual
+
+# public network
+auto vmbr0
+iface vmbr0 inet static
+ address 192.X.Y.57
+ netmask 255.255.250.0
+ gateway 192.X.Y.1
+ bridge_ports eth0
+ bridge_stp off
+ bridge_fd 0
+
+# cluster network
+auto eth1
+iface eth1 inet static
+ address 10.1.1.1
+ netmask 255.255.255.0
+
+# fast network
+auto eth2
+iface eth2 inet static
+ address 10.1.2.1
+ netmask 255.255.255.0
+----
+
+Here, we will use the network 10.1.2.0/24 as a migration network. For
+a single migration, you can do this using the `migration_network`
+parameter of the command line tool:
+
+----
+# qm migrate 106 tre --online --migration_network 10.1.2.0/24
+----
+
+To configure this as the default network for all migrations in the
+cluster, set the `migration` property of the `/etc/pve/datacenter.cfg`
+file:
+
+----
+# use dedicated migration network
+migration: secure,network=10.1.2.0/24
+----
+
+NOTE: The migration type must always be set when the migration network
+gets set in `/etc/pve/datacenter.cfg`.
+
+
ifdef::manvolnum[]
include::pve-copyright.adoc[]
endif::manvolnum[]
projects / pve-docs.git / blobdiff