emulated SCSI controller will relay this information to the storage, which will
then shrink the disk image accordingly.
+If you would like a drive to be presented to the guest as a solid-state drive
+rather than a rotational hard disk, you can set the *SSD emulation* option on
+that drive. There is no requirement that the underlying storage actually be
+backed by SSDs; this feature can be used with physical media of any type.
+
.IO Thread
The option *IO Thread* can only be used when using a disk with the
*VirtIO* controller, or with the *SCSI* controller, when the emulated controller
Meltdown / Spectre related CPU flags
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-There are two CPU flags related to the Meltdown and Spectre vulnerabilities
+There are several CPU flags related to the Meltdown and Spectre vulnerabilities
footnote:[Meltdown Attack https://meltdownattack.com/] which need to be set
manually unless the selected CPU type of your VM already enables them by default.
-The first, called 'pcid', helps to reduce the performance impact of the Meltdown
-mitigation called 'Kernel Page-Table Isolation (KPTI)', which effectively hides
-the Kernel memory from the user space. Without PCID, KPTI is quite an expensive
-mechanism footnote:[PCID is now a critical performance/security feature on x86
-https://groups.google.com/forum/m/#!topic/mechanical-sympathy/L9mHTbeQLNU].
-
-The second CPU flag is called 'spec-ctrl', which allows an operating system to
-selectively disable or restrict speculative execution in order to limit the
-ability of attackers to exploit the Spectre vulnerability.
-
-There are two requirements that need to be fulfilled in order to use these two
+There are two requirements that need to be fulfilled in order to use these
CPU flags:
* The host CPU(s) must support the feature and propagate it to the guest's virtual CPU(s)
* The guest operating system must be updated to a version which mitigates the
attacks and is able to utilize the CPU feature
-In order to use 'spec-ctrl', your CPU or system vendor also needs to provide a
+Otherwise you need to set the desired CPU flag of the virtual CPU, either by
+editing the CPU options in the WebUI, or by setting the 'flags' property of the
+'cpu' option in the VM configuration file.
+
+For Spectre v1,v2,v4 fixes, your CPU or system vendor also needs to provide a
so-called ``microcode update'' footnote:[You can use `intel-microcode' /
`amd-microcode' from Debian non-free if your vendor does not provide such an
update. Note that not all affected CPUs can be updated to support spec-ctrl.]
for your CPU.
-To check if the {pve} host supports PCID, execute the following command as root:
+
+To check if the {pve} host is vulnerable, execute the following command as root:
----
-# grep ' pcid ' /proc/cpuinfo
+for f in /sys/devices/system/cpu/vulnerabilities/*; do echo "${f##*/} -" $(cat "$f"); done
----
-If this does not return empty your host's CPU has support for 'pcid'.
+A community script is also available to detect is the host is still vulnerable.
+footnote:[spectre-meltdown-checker https://meltdown.ovh/]
-To check if the {pve} host supports spec-ctrl, execute the following command as root:
+Intel processors
+^^^^^^^^^^^^^^^^
+* 'pcid'
++
+This reduces the performance impact of the Meltdown (CVE-2017-5754) mitigation
+called 'Kernel Page-Table Isolation (KPTI)', which effectively hides
+the Kernel memory from the user space. Without PCID, KPTI is quite an expensive
+mechanism footnote:[PCID is now a critical performance/security feature on x86
+https://groups.google.com/forum/m/#!topic/mechanical-sympathy/L9mHTbeQLNU].
++
+To check if the {pve} host supports PCID, execute the following command as root:
++
----
-# grep ' spec_ctrl ' /proc/cpuinfo
+# grep ' pcid ' /proc/cpuinfo
----
++
+If this does not return empty your host's CPU has support for 'pcid'.
-If this does not return empty your host's CPU has support for 'spec-ctrl'.
+* 'spec-ctrl'
++
+Required to enable the Spectre v1 (CVE-2017-5753) and Spectre v2 (CVE-2017-5715) fix,
+in cases where retpolines are not sufficient.
+Included by default in Intel CPU models with -IBRS suffix.
+Must be explicitly turned on for Intel CPU models without -IBRS suffix.
+Requires an updated host CPU microcode (intel-microcode >= 20180425).
++
+* 'ssbd'
++
+Required to enable the Spectre V4 (CVE-2018-3639) fix. Not included by default in any Intel CPU model.
+Must be explicitly turned on for all Intel CPU models.
+Requires an updated host CPU microcode(intel-microcode >= 20180703).
-If you use `host' or another CPU type which enables the desired flags by
-default, and you updated your guest OS to make use of the associated CPU
-features, you're already set.
-Otherwise you need to set the desired CPU flag of the virtual CPU, either by
-editing the CPU options in the WebUI, or by setting the 'flags' property of the
-'cpu' option in the VM configuration file.
+AMD processors
+^^^^^^^^^^^^^^
+
+* 'ibpb'
++
+Required to enable the Spectre v1 (CVE-2017-5753) and Spectre v2 (CVE-2017-5715) fix,
+in cases where retpolines are not sufficient.
+Included by default in AMD CPU models with -IBPB suffix.
+Must be explicitly turned on for AMD CPU models without -IBPB suffix.
+Requires the host CPU microcode to support this feature before it can be used for guest CPUs.
+
+
+
+* 'virt-ssbd'
++
+Required to enable the Spectre v4 (CVE-2018-3639) fix.
+Not included by default in any AMD CPU model.
+Must be explicitly turned on for all AMD CPU models.
+This should be provided to guests, even if amd-ssbd is also provided, for maximum guest compatibility.
+Note that this must be explicitly enabled when when using the "host" cpu model,
+because this is a virtual feature which does not exist in the physical CPUs.
+
+
+* 'amd-ssbd'
++
+Required to enable the Spectre v4 (CVE-2018-3639) fix.
+Not included by default in any AMD CPU model. Must be explicitly turned on for all AMD CPU models.
+This provides higher performance than virt-ssbd, therefore a host supporting this should always expose this to guests if possible.
+virt-ssbd should none the less also be exposed for maximum guest compatibility as some kernels only know about virt-ssbd.
+
+
+* 'amd-no-ssb'
++
+Recommended to indicate the host is not vulnerable to Spectre V4 (CVE-2018-3639).
+Not included by default in any AMD CPU model.
+Future hardware generations of CPU will not be vulnerable to CVE-2018-3639,
+and thus the guest should be told not to enable its mitigations, by exposing amd-no-ssb.
+This is mutually exclusive with virt-ssbd and amd-ssbd.
+
NUMA
^^^^
the host is below 80%, will dynamically add memory to the guest up to the
maximum memory specified.
-When the host is becoming short on RAM, the VM will then release some memory
+When the host is running low on RAM, the VM will then release some memory
back to the host, swapping running processes if needed and starting the oom
killer in last resort. The passing around of memory between host and guest is
done via a special `balloon` kernel driver running inside the guest, which will
When multiple VMs use the autoallocate facility, it is possible to set a
*Shares* coefficient which indicates the relative amount of the free host memory
that each VM should take. Suppose for instance you have four VMs, three of them
-running a HTTP server and the last one is a database server. To cache more
+running an HTTP server and the last one is a database server. To cache more
database blocks in the database server RAM, you would like to prioritize the
database VM when spare RAM is available. For this you assign a Shares property
of 3000 to the database VM, leaving the other VMs to the Shares default setting
of 1000. The host server has 32GB of RAM, and is currently using 16GB, leaving 32
* 80/100 - 16 = 9GB RAM to be allocated to the VMs. The database VM will get 9 *
3000 / (3000 + 1000 + 1000 + 1000) = 4.5 GB extra RAM and each HTTP server will
-get 1/5 GB.
+get 1.5 GB.
All Linux distributions released after 2010 have the balloon kernel driver
included. For Windows OSes, the balloon driver needs to be added manually and can
//http://blog.vmsplice.net/2011/09/qemu-internals-vhost-architecture.html
When using the VirtIO driver with {pve}, each NIC network queue is passed to the
-host kernel, where the queue will be processed by a kernel thread spawn by the
+host kernel, where the queue will be processed by a kernel thread spawned by the
vhost driver. With this option activated, it is possible to pass _multiple_
network queues to the host kernel for each NIC.
process a great number of incoming connections, such as when the VM is running
as a router, reverse proxy or a busy HTTP server doing long polling.
+[[qm_display]]
+Display
+~~~~~~~
+
+QEMU can virtualize a few types of VGA hardware. Some examples are:
+
+* *std*, the default, emulates a card with Bochs VBE extensions.
+* *vmware*, is a VMWare SVGA-II compatible adapter.
+* *qxl*, is the QXL paravirtualized graphics card. Selecting this also
+enables SPICE for the VM.
+
+You can edit the amount of memory given to the virtual GPU, by setting
+the *memory* option. This can enable higher resolutions inside the VM,
+especially with SPICE/QXL.
+
+Selecting Multi-Monitor mode for SPICE (e.g., qxl2 for dual monitors) has
+some implications:
+
+* Windows needs a device for each monitor, so if your ostype is some
+version of windows, {pve} gives the VM an extra device per monitor.
+Each device gets the specified amount of memory.
+* Linux VMs, can always enable more virtual monitors, but selecting
+a Multi-Monitor mode multiplies the memory given to the device with
+the number of monitors.
+
+Selecting *serialX* as display disables the VGA output, and redirects
+the Web Console to the selected serial port. A configured memory setting
+will be ignored in that case.
[[qm_usb_passthrough]]
USB Passthrough
the disk images. If you want to change the template, create a linked
clone and modify that.
+VM Generation ID
+----------------
+
+{pve} supports Virtual Machine Generation ID ('vmgedid') footnote:[Official
+'vmgenid' Specification
+https://docs.microsoft.com/en-us/windows/desktop/hyperv_v2/virtual-machine-generation-identifier]
+for virtual machines.
+This can be used by the guest operating system to detect any event resulting
+in a time shift event, for example, restoring a backup or a snapshot rollback.
+
+When creating new VMs, a 'vmgenid' will be automatically generated and saved
+in its configuration file.
+
+To create and add a 'vmgenid' to an already existing VM one can pass the
+special value `1' to let {pve} autogenerate one or manually set the 'UUID'
+footnote:[Online GUID generator http://guid.one/] by using it as value,
+e.g.:
+
+----
+ qm set VMID -vmgenid 1
+ qm set VMID -vmgenid 00000000-0000-0000-0000-000000000000
+----
+
+NOTE: The initial addition of a 'vmgenid' device to an existing VM, may result
+in the same effects as a change on snapshot rollback, backup restore, etc., has
+as the VM can interpret this as generation change.
+
+In the rare case the 'vmgenid' mechanism is not wanted one can pass `0' for
+its value on VM creation, or retroactively delete the property in the
+configuration with:
+
+----
+ qm set VMID -delete vmgenid
+----
+
+The most prominent use case for 'vmgenid' are newer Microsoft Windows
+operating systems, which use it to avoid problems in time sensitive or
+replicate services (e.g., databases, domain controller
+footnote:[https://docs.microsoft.com/en-us/windows-server/identity/ad-ds/get-started/virtual-dc/virtualized-domain-controller-architecture])
+on snapshot rollback, backup restore or a whole VM clone operation.
+
Importing Virtual Machines and disk images
------------------------------------------
Microsoft provides
https://developer.microsoft.com/en-us/windows/downloads/virtual-machines/[Virtual Machines downloads]
- to get started with Windows development.We are going to use one of these
+ to get started with Windows development.We are going to use one of these
to demonstrate the OVF import feature.
Download the Virtual Machine zip
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-After getting informed about the user agreement, choose the _Windows 10
+After getting informed about the user agreement, choose the _Windows 10
Enterprise (Evaluation - Build)_ for the VMware platform, and download the zip.
Extract the disk image from the zip
Adding an external disk image to a Virtual Machine
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-You can also add an existing disk image to a VM, either coming from a
+You can also add an existing disk image to a VM, either coming from a
foreign hypervisor, or one that you created yourself.
Suppose you created a Debian/Ubuntu disk image with the 'vmdebootstrap' tool:
projects / pve-docs.git / blobdiff