[thumbnail="screenshot/gui-create-vm-os.png"]
-When creating a VM, setting the proper Operating System(OS) allows {pve} to
-optimize some low level parameters. For instance Windows OS expect the BIOS
-clock to use the local time, while Unix based OS expect the BIOS clock to have
-the UTC time.
+When creating a virtual machine (VM), setting the proper Operating System(OS)
+allows {pve} to optimize some low level parameters. For instance Windows OS
+expect the BIOS clock to use the local time, while Unix based OS expect the
+BIOS clock to have the UTC time.
+[[qm_system_settings]]
+System Settings
+~~~~~~~~~~~~~~~
+
+On VM creation you can change some basic system components of the new VM. You
+can specify which xref:qm_display[display type] you want to use.
+[thumbnail="screenshot/gui-create-vm-system.png"]
+Additionally, the xref:qm_hard_disk[SCSI controller] can be changed.
+If you plan to install the QEMU Guest Agent, or if your selected ISO image
+already ships and installs it automatically, you may want to tick the 'Qemu
+Agent' box, which lets {pve} know that it can use its features to show some
+more information, and complete some actions (for example, shutdown or
+snapshots) more intelligently.
+
+{pve} allows to boot VMs with different firmware and machine types, namely
+xref:qm_bios_and_uefi[SeaBIOS and OVMF]. In most cases you want to switch from
+the default SeabBIOS to OVMF only if you plan to use
+xref:qm_pci_passthrough[PCIe pass through]. A VMs 'Machine Type' defines the
+hardware layout of the VM's virtual motherboard. You can choose between the
+default https://en.wikipedia.org/wiki/Intel_440FX[Intel 440FX] or the
+https://ark.intel.com/content/www/us/en/ark/products/31918/intel-82q35-graphics-and-memory-controller.html[Q35]
+chipset, which also provides a virtual PCIe bus, and thus may be desired if
+one wants to pass through PCIe hardware.
[[qm_hard_disk]]
Hard Disk
~~~~~~~~~
+[[qm_hard_disk_bus]]
+Bus/Controller
+^^^^^^^^^^^^^^
Qemu can emulate a number of storage controllers:
* the *IDE* controller, has a design which goes back to the 1984 PC/AT disk
VirtIO SCSI Controller, in terms of features.
[thumbnail="screenshot/gui-create-vm-hard-disk.png"]
+
+[[qm_hard_disk_formats]]
+Image Format
+^^^^^^^^^^^^
On each controller you attach a number of emulated hard disks, which are backed
by a file or a block device residing in the configured storage. The choice of
a storage type will determine the format of the hard disk image. Storages which
format does not support thin provisioning or snapshots by itself, requiring
cooperation from the storage layer for these tasks. It may, however, be up to
10% faster than the *QEMU image format*. footnote:[See this benchmark for details
- http://events.linuxfoundation.org/sites/events/files/slides/CloudOpen2013_Khoa_Huynh_v3.pdf]
+ https://events.static.linuxfound.org/sites/events/files/slides/CloudOpen2013_Khoa_Huynh_v3.pdf]
* the *VMware image format* only makes sense if you intend to import/export the
disk image to other hypervisors.
+[[qm_hard_disk_cache]]
+Cache Mode
+^^^^^^^^^^
Setting the *Cache* mode of the hard drive will impact how the host system will
notify the guest systems of block write completions. The *No cache* default
means that the guest system will be notified that a write is complete when each
`zfspool`, so adding a disk image to other storages when the VM has replication
configured requires to skip replication for this disk image.
+[[qm_hard_disk_discard]]
+Trim/Discard
+^^^^^^^^^^^^
If your storage supports _thin provisioning_ (see the storage chapter in the
-{pve} guide), and your VM has a *SCSI* controller you can activate the *Discard*
-option on the hard disks connected to that controller. With *Discard* enabled,
-when the filesystem of a VM marks blocks as unused after removing files, the
-emulated SCSI controller will relay this information to the storage, which will
-then shrink the disk image accordingly.
+{pve} guide), you can activate the *Discard* option on a drive. With *Discard*
+set and a _TRIM_-enabled guest OS footnote:[TRIM, UNMAP, and discard
+https://en.wikipedia.org/wiki/Trim_%28computing%29], when the VM's filesystem
+marks blocks as unused after deleting files, the controller will relay this
+information to the storage, which will then shrink the disk image accordingly.
+For the guest to be able to issue _TRIM_ commands, you must enable the *Discard*
+option on the drive. Some guest operating systems may also require the
+*SSD Emulation* flag to be set. Note that *Discard* on *VirtIO Block* drives is
+only supported on guests using Linux Kernel 5.0 or higher.
If you would like a drive to be presented to the guest as a solid-state drive
rather than a rotational hard disk, you can set the *SSD emulation* option on
that drive. There is no requirement that the underlying storage actually be
backed by SSDs; this feature can be used with physical media of any type.
+Note that *SSD emulation* is not supported on *VirtIO Block* drives.
+
-.IO Thread
+[[qm_hard_disk_iothread]]
+IO Thread
+^^^^^^^^^
The option *IO Thread* can only be used when using a disk with the
*VirtIO* controller, or with the *SCSI* controller, when the emulated controller
type is *VirtIO SCSI single*.
With this enabled, Qemu creates one I/O thread per storage controller,
-instead of a single thread for all I/O, so it increases performance when
+rather than a single thread for all I/O. This can increase performance when
multiple disks are used and each disk has its own storage controller.
-Note that backups do not currently work with *IO Thread* enabled.
[[qm_cpu]]
cores on a machine with only 8 cores). In that case the host system will
balance the Qemu execution threads between your server cores, just like if you
were running a standard multithreaded application. However, {pve} will prevent
-you from assigning more virtual CPU cores than physically available, as this will
-only bring the performance down due to the cost of context switches.
+you from starting VMs with more virtual CPU cores than physically available, as
+this will only bring the performance down due to the cost of context switches.
[[qm_cpu_resource_limits]]
Resource Limits
cluster where all nodes have the same CPU, set the CPU type to host, as in
theory this will give your guests maximum performance.
+Custom CPU Types
+^^^^^^^^^^^^^^^^
+
+You can specify custom CPU types with a configurable set of features. These are
+maintained in the configuration file `/etc/pve/virtual-guest/cpu-models.conf` by
+an administrator. See `man cpu-models.conf` for format details.
+
+Specified custom types can be selected by any user with the `Sys.Audit`
+privilege on `/nodes`. When configuring a custom CPU type for a VM via the CLI
+or API, the name needs to be prefixed with 'custom-'.
+
Meltdown / Spectre related CPU flags
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This option is also required to hot-plug cores or RAM in a VM.
If the NUMA option is used, it is recommended to set the number of sockets to
-the number of sockets of the host system.
+the number of nodes of the host system.
vCPU hot-plug
^^^^^^^^^^^^^
qemu: using cirrus considered harmful], e.g., if using Windows XP or earlier
* *vmware*, is a VMWare SVGA-II compatible adapter.
* *qxl*, is the QXL paravirtualized graphics card. Selecting this also
-enables SPICE for the VM.
+enables https://www.spice-space.org/[SPICE] (a remote viewer protocol) for the
+VM.
You can edit the amount of memory given to the virtual GPU, by setting
the 'memory' option. This can enable higher resolutions inside the VM,
~~~~~~~~~~~~~
In order to properly emulate a computer, QEMU needs to use a firmware.
-By default QEMU uses *SeaBIOS* for this, which is an open-source, x86 BIOS
-implementation. SeaBIOS is a good choice for most standard setups.
+Which, on common PCs often known as BIOS or (U)EFI, is executed as one of the
+first steps when booting a VM. It is responsible for doing basic hardware
+initialization and for providing an interface to the firmware and hardware for
+the operating system. By default QEMU uses *SeaBIOS* for this, which is an
+open-source, x86 BIOS implementation. SeaBIOS is a good choice for most
+standard setups.
There are, however, some scenarios in which a BIOS is not a good firmware
to boot from, e.g. if you want to do VGA passthrough. footnote:[Alex Williamson has a very good blog entry about this.
with a press of the ESC button during boot), or you have to choose
SPICE as the display type.
+[[qm_ivshmem]]
+Inter-VM shared memory
+~~~~~~~~~~~~~~~~~~~~~~
+
+You can add an Inter-VM shared memory device (`ivshmem`), which allows one to
+share memory between the host and a guest, or also between multiple guests.
+
+To add such a device, you can use `qm`:
+
+ qm set <vmid> -ivshmem size=32,name=foo
+
+Where the size is in MiB. The file will be located under
+`/dev/shm/pve-shm-$name` (the default name is the vmid).
+
+NOTE: Currently the device will get deleted as soon as any VM using it got
+shutdown or stopped. Open connections will still persist, but new connections
+to the exact same device cannot be made anymore.
+
+A use case for such a device is the Looking Glass
+footnote:[Looking Glass: https://looking-glass.io/] project, which enables high
+performance, low-latency display mirroring between host and guest.
+
+[[qm_audio_device]]
+Audio Device
+~~~~~~~~~~~~
+
+To add an audio device run the following command:
+
+----
+qm set <vmid> -audio0 device=<device>
+----
+
+Supported audio devices are:
+
+* `ich9-intel-hda`: Intel HD Audio Controller, emulates ICH9
+* `intel-hda`: Intel HD Audio Controller, emulates ICH6
+* `AC97`: Audio Codec '97, useful for older operating systems like Windows XP
+
+There are two backends available:
+
+* 'spice'
+* 'none'
+
+The 'spice' backend can be used in combination with xref:qm_display[SPICE] while
+the 'none' backend can be useful if an audio device is needed in the VM for some
+software to work. To use the physical audio device of the host use device
+passthrough (see xref:qm_pci_passthrough[PCI Passthrough] and
+xref:qm_usb_passthrough[USB Passthrough]). Remote protocols like Microsoft’s RDP
+have options to play sound.
+
+
+[[qm_virtio_rng]]
+VirtIO RNG
+~~~~~~~~~~
+
+A RNG (Random Number Generator) is a device providing entropy ('randomness') to
+a system. A virtual hardware-RNG can be used to provide such entropy from the
+host system to a guest VM. This helps to avoid entropy starvation problems in
+the guest (a situation where not enough entropy is available and the system may
+slow down or run into problems), especially during the guests boot process.
+
+To add a VirtIO-based emulated RNG, run the following command:
+
+----
+qm set <vmid> -rng0 source=<source>[,max_bytes=X,period=Y]
+----
+
+`source` specifies where entropy is read from on the host and has to be one of
+the following:
+
+* `/dev/urandom`: Non-blocking kernel entropy pool (preferred)
+* `/dev/random`: Blocking kernel pool (not recommended, can lead to entropy
+ starvation on the host system)
+* `/dev/hwrng`: To pass through a hardware RNG attached to the host (if multiple
+ are available, the one selected in
+ `/sys/devices/virtual/misc/hw_random/rng_current` will be used)
+
+A limit can be specified via the `max_bytes` and `period` parameters, they are
+read as `max_bytes` per `period` in milliseconds. However, it does not represent
+a linear relationship: 1024B/1000ms would mean that up to 1 KiB of data becomes
+available on a 1 second timer, not that 1 KiB is streamed to the guest over the
+course of one second. Reducing the `period` can thus be used to inject entropy
+into the guest at a faster rate.
+
+By default, the limit is set to 1024 bytes per 1000 ms (1 KiB/s). It is
+recommended to always use a limiter to avoid guests using too many host
+resources. If desired, a value of '0' for `max_bytes` can be used to disable
+all limits.
+
+[[qm_bootorder]]
+Device Boot Order
+~~~~~~~~~~~~~~~~~
+
+QEMU can tell the guest which devices it should boot from, and in which order.
+This can be specified in the config via the `boot` property, e.g.:
+
+----
+boot: order=scsi0;net0;hostpci0
+----
+
+[thumbnail="screenshot/gui-qemu-edit-bootorder.png"]
+
+This way, the guest would first attempt to boot from the disk `scsi0`, if that
+fails, it would go on to attempt network boot from `net0`, and in case that
+fails too, finally attempt to boot from a passed through PCIe device (seen as
+disk in case of NVMe, otherwise tries to launch into an option ROM).
+
+On the GUI you can use a drag-and-drop editor to specify the boot order, and use
+the checkbox to enable or disable certain devices for booting altogether.
+
+NOTE: If your guest uses multiple disks to boot the OS or load the bootloader,
+all of them must be marked as 'bootable' (that is, they must have the checkbox
+enabled or appear in the list in the config) for the guest to be able to boot.
+This is because recent SeaBIOS and OVMF versions only initialize disks if they
+are marked 'bootable'.
+
+In any case, even devices not appearing in the list or having the checkmark
+disabled will still be available to the guest, once it's operating system has
+booted and initialized them. The 'bootable' flag only affects the guest BIOS and
+bootloader.
+
+
[[qm_startup_and_shutdown]]
Automatic Start and Shutdown of Virtual Machines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cluster-wide.
+[[qm_qemu_agent]]
+Qemu Guest Agent
+~~~~~~~~~~~~~~~~
+
+The Qemu Guest Agent is a service which runs inside the VM, providing a
+communication channel between the host and the guest. It is used to exchange
+information and allows the host to issue commands to the guest.
+
+For example, the IP addresses in the VM summary panel are fetched via the guest
+agent.
+
+Or when starting a backup, the guest is told via the guest agent to sync
+outstanding writes via the 'fs-freeze' and 'fs-thaw' commands.
+
+For the guest agent to work properly the following steps must be taken:
+
+* install the agent in the guest and make sure it is running
+* enable the communication via the agent in {pve}
+
+Install Guest Agent
+^^^^^^^^^^^^^^^^^^^
+
+For most Linux distributions, the guest agent is available. The package is
+usually named `qemu-guest-agent`.
+
+For Windows, it can be installed from the
+https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/stable-virtio/virtio-win.iso[Fedora
+VirtIO driver ISO].
+
+Enable Guest Agent Communication
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Communication from {pve} with the guest agent can be enabled in the VM's
+*Options* panel. A fresh start of the VM is necessary for the changes to take
+effect.
+
+It is possible to enable the 'Run guest-trim' option. With this enabled,
+{pve} will issue a trim command to the guest after the following
+operations that have the potential to write out zeros to the storage:
+
+* moving a disk to another storage
+* live migrating a VM to another node with local storage
+
+On a thin provisioned storage, this can help to free up unused space.
+
+Troubleshooting
+^^^^^^^^^^^^^^^
+
+.VM does not shut down
+
+Make sure the guest agent is installed and running.
+
+Once the guest agent is enabled, {pve} will send power commands like
+'shutdown' via the guest agent. If the guest agent is not running, commands
+cannot get executed properly and the shutdown command will run into a timeout.
+
+[[qm_spice_enhancements]]
+SPICE Enhancements
+~~~~~~~~~~~~~~~~~~
+
+SPICE Enhancements are optional features that can improve the remote viewer
+experience.
+
+To enable them via the GUI go to the *Options* panel of the virtual machine. Run
+the following command to enable them via the CLI:
+
+----
+qm set <vmid> -spice_enhancements foldersharing=1,videostreaming=all
+----
+
+NOTE: To use these features the <<qm_display,*Display*>> of the virtual machine
+must be set to SPICE (qxl).
+
+Folder Sharing
+^^^^^^^^^^^^^^
+
+Share a local folder with the guest. The `spice-webdavd` daemon needs to be
+installed in the guest. It makes the shared folder available through a local
+WebDAV server located at http://localhost:9843.
+
+For Windows guests the installer for the 'Spice WebDAV daemon' can be downloaded
+from the
+https://www.spice-space.org/download.html#windows-binaries[official SPICE website].
+
+Most Linux distributions have a package called `spice-webdavd` that can be
+installed.
+
+To share a folder in Virt-Viewer (Remote Viewer) go to 'File -> Preferences'.
+Select the folder to share and then enable the checkbox.
+
+NOTE: Folder sharing currently only works in the Linux version of Virt-Viewer.
+
+CAUTION: Experimental! Currently this feature does not work reliably.
+
+Video Streaming
+^^^^^^^^^^^^^^^
+
+Fast refreshing areas are encoded into a video stream. Two options exist:
+
+* *all*: Any fast refreshing area will be encoded into a video stream.
+* *filter*: Additional filters are used to decide if video streaming should be
+ used (currently only small window surfaces are skipped).
+
+A general recommendation if video streaming should be enabled and which option
+to choose from cannot be given. Your mileage may vary depending on the specific
+circumstances.
+
+Troubleshooting
+^^^^^^^^^^^^^^^
+
+.Shared folder does not show up
+
+Make sure the WebDAV service is enabled and running in the guest. On Windows it
+is called 'Spice webdav proxy'. In Linux the name is 'spice-webdavd' but can be
+different depending on the distribution.
+
+If the service is running, check the WebDAV server by opening
+http://localhost:9843 in a browser in the guest.
+
+It can help to restart the SPICE session.
+
[[qm_migration]]
Migration
---------
disk image *Format* if the storage driver supports several formats.
+
-NOTE: A full clone need to read and copy all VM image data. This is
+NOTE: A full clone needs to read and copy all VM image data. This is
usually much slower than creating a linked clone.
+
Linked Clone::
-Modern storage drivers supports a way to generate fast linked
+Modern storage drivers support a way to generate fast linked
clones. Such a clone is a writable copy whose initial contents are the
same as the original data. Creating a linked clone is nearly
instantaneous, and initially consumes no additional space.
templates can later be used to create linked clones efficiently.
+
-NOTE: You cannot delete the original template while linked clones
-exists.
+NOTE: You cannot delete an original template while linked clones
+exist.
+
It is not possible to change the *Target storage* for linked clones,
different node. The only restriction is that the VM is on shared
storage, and that storage is also available on the target node.
-To avoid resource conflicts, all network interface MAC addresses gets
+To avoid resource conflicts, all network interface MAC addresses get
randomized, and we generate a new 'UUID' for the VM BIOS (smbios1)
setting.
include::qm-pci-passthrough.adoc[]
endif::wiki[]
+Hookscripts
+-----------
+
+You can add a hook script to VMs with the config property `hookscript`.
+
+ qm set 100 -hookscript local:snippets/hookscript.pl
+
+It will be called during various phases of the guests lifetime.
+For an example and documentation see the example script under
+`/usr/share/pve-docs/examples/guest-example-hookscript.pl`.
+
+[[qm_hibernate]]
+Hibernation
+-----------
+
+You can suspend a VM to disk with the GUI option `Hibernate` or with
+
+ qm suspend ID --todisk
+
+That means that the current content of the memory will be saved onto disk
+and the VM gets stopped. On the next start, the memory content will be
+loaded and the VM can continue where it was left off.
+
+[[qm_vmstatestorage]]
+.State storage selection
+If no target storage for the memory is given, it will be automatically
+chosen, the first of:
+
+1. The storage `vmstatestorage` from the VM config.
+2. The first shared storage from any VM disk.
+3. The first non-shared storage from any VM disk.
+4. The storage `local` as a fallback.
Managing Virtual Machines with `qm`
------------------------------------
qm shutdown 300 && qm wait 300 -timeout 40
+Destroying a VM always removes it from Access Control Lists and it always
+removes the firewall configuration of the VM. You have to activate
+'--purge', if you want to additionally remove the VM from replication jobs,
+backup jobs and HA resource configurations.
+
+ qm destroy 300 --purge
+
+
[[qm_configuration]]
Configuration
.Example VM Configuration
----
+boot: order=virtio0;net0
cores: 1
sockets: 1
memory: 512
name: webmail
ostype: l26
-bootdisk: virtio0
net0: e1000=EE:D2:28:5F:B6:3E,bridge=vmbr0
virtio0: local:vm-100-disk-1,size=32G
----
relationship between snapshots. `snaptime` is the snapshot creation
time stamp (Unix epoch).
+You can optionally save the memory of a running VM with the option `vmstate`.
+For details about how the target storage gets chosen for the VM state, see
+xref:qm_vmstatestorage[State storage selection] in the chapter
+xref:qm_hibernate[Hibernation].
[[qm_options]]
Options
projects / pve-docs.git / blobdiff