General Settings
~~~~~~~~~~~~~~~~
-[thumbnail="gui-create-vm-general.png"]
+[thumbnail="screenshot/gui-create-vm-general.png"]
General settings of a VM include
OS Settings
~~~~~~~~~~~
-[thumbnail="gui-create-vm-os.png"]
+[thumbnail="screenshot/gui-create-vm-os.png"]
When creating a VM, setting the proper Operating System(OS) allows {pve} to
optimize some low level parameters. For instance Windows OS expect the BIOS
is an older type of paravirtualized controller. It has been superseded by the
VirtIO SCSI Controller, in terms of features.
-[thumbnail="gui-create-vm-hard-disk.png"]
+[thumbnail="screenshot/gui-create-vm-hard-disk.png"]
On each controller you attach a number of emulated hard disks, which are backed
by a file or a block device residing in the configured storage. The choice of
a storage type will determine the format of the hard disk image. Storages which
present block devices (LVM, ZFS, Ceph) will require the *raw disk image format*,
-whereas files based storages (Ext4, NFS, GlusterFS) will let you to choose
+whereas files based storages (Ext4, NFS, CIFS, GlusterFS) will let you to choose
either the *raw disk image format* or the *QEMU image format*.
* the *QEMU image format* is a copy on write format which allows snapshots, and
CPU
~~~
-[thumbnail="gui-create-vm-cpu.png"]
+[thumbnail="screenshot/gui-create-vm-cpu.png"]
A *CPU socket* is a physical slot on a PC motherboard where you can plug a CPU.
This CPU can then contain one or many *cores*, which are independent
host.
.Fixed Memory Allocation
-[thumbnail="gui-create-vm-memory-fixed.png"]
+[thumbnail="screenshot/gui-create-vm-memory.png"]
-When choosing a *fixed size memory* {pve} will simply allocate what you
-specify to your VM.
+When setting memory and minimum memory to the same amount
+{pve} will simply allocate what you specify to your VM.
Even when using a fixed memory size, the ballooning device gets added to the
VM, because it delivers useful information such as how much memory the guest
really uses.
In general, you should leave *ballooning* enabled, but if you want to disable
it (e.g. for debugging purposes), simply uncheck
-*Ballooning* or set
+*Ballooning Device* or set
balloon: 0
in the configuration.
.Automatic Memory Allocation
-[thumbnail="gui-create-vm-memory-dynamic.png", float="left"]
// see autoballoon() in pvestatd.pm
-When choosing to *automatically allocate memory*, {pve} will make sure that the
+When setting the minimum memory lower than memory, {pve} will make sure that the
minimum amount you specified is always available to the VM, and if RAM usage on
the host is below 80%, will dynamically add memory to the guest up to the
maximum memory specified.
-When the host is becoming short on RAM, the VM will then release some memory
+When the host is running low on RAM, the VM will then release some memory
back to the host, swapping running processes if needed and starting the oom
killer in last resort. The passing around of memory between host and guest is
done via a special `balloon` kernel driver running inside the guest, which will
When multiple VMs use the autoallocate facility, it is possible to set a
*Shares* coefficient which indicates the relative amount of the free host memory
that each VM should take. Suppose for instance you have four VMs, three of them
-running a HTTP server and the last one is a database server. To cache more
+running an HTTP server and the last one is a database server. To cache more
database blocks in the database server RAM, you would like to prioritize the
database VM when spare RAM is available. For this you assign a Shares property
of 3000 to the database VM, leaving the other VMs to the Shares default setting
of 1000. The host server has 32GB of RAM, and is currently using 16GB, leaving 32
* 80/100 - 16 = 9GB RAM to be allocated to the VMs. The database VM will get 9 *
3000 / (3000 + 1000 + 1000 + 1000) = 4.5 GB extra RAM and each HTTP server will
-get 1/5 GB.
+get 1.5 GB.
All Linux distributions released after 2010 have the balloon kernel driver
included. For Windows OSes, the balloon driver needs to be added manually and can
Network Device
~~~~~~~~~~~~~~
-[thumbnail="gui-create-vm-network.png"]
+[thumbnail="screenshot/gui-create-vm-network.png"]
Each VM can have many _Network interface controllers_ (NIC), of four different
types:
the Qemu user networking stack, where a built-in router and DHCP server can
provide network access. This built-in DHCP will serve addresses in the private
10.0.2.0/24 range. The NAT mode is much slower than the bridged mode, and
-should only be used for testing.
+should only be used for testing. This mode is only available via CLI or the API,
+but not via the WebUI.
You can also skip adding a network device when creating a VM by selecting *No
network device*.
//http://blog.vmsplice.net/2011/09/qemu-internals-vhost-architecture.html
When using the VirtIO driver with {pve}, each NIC network queue is passed to the
-host kernel, where the queue will be processed by a kernel thread spawn by the
+host kernel, where the queue will be processed by a kernel thread spawned by the
vhost driver. With this option activated, it is possible to pass _multiple_
network queues to the host kernel for each NIC.
.Start and Shutdown Order
-[thumbnail="gui-qemu-edit-start-order.png"]
+[thumbnail="screenshot/gui-qemu-edit-start-order.png"]
In some case you want to be able to fine tune the boot order of your
VMs, for instance if one of your VM is providing firewalling or DHCP
* *Start/Shutdown order*: Defines the start order priority. E.g. set it to 1 if
you want the VM to be the first to be started. (We use the reverse startup
order for shutdown, so a machine with a start order of 1 would be the last to
-be shut down)
+be shut down). If multiple VMs have the same order defined on a host, they will
+additionally be ordered by 'VMID' in ascending order.
* *Startup delay*: Defines the interval between this VM start and subsequent
VMs starts . E.g. set it to 240 if you want to wait 240 seconds before starting
other VMs.
* *Shutdown timeout*: Defines the duration in seconds {pve} should wait
for the VM to be offline after issuing a shutdown command.
-By default this value is set to 60, which means that {pve} will issue a
-shutdown request, wait 60s for the machine to be offline, and if after 60s
-the machine is still online will notify that the shutdown action failed.
+By default this value is set to 180, which means that {pve} will issue a
+shutdown request and wait 180 seconds for the machine to be offline. If
+the machine is still online after the timeout it will be stopped forcefully.
NOTE: VMs managed by the HA stack do not follow the 'start on boot' and
'boot order' options currently. Those VMs will be skipped by the startup and
stopped.
Please note that machines without a Start/Shutdown order parameter will always
-start after those where the parameter is set, and this parameter only
-makes sense between the machines running locally on a host, and not
+start after those where the parameter is set. Further, this parameter can only
+be enforced between virtual machines running on the same host, not
cluster-wide.
Migration
---------
-[thumbnail="gui-qemu-migrate.png"]
+[thumbnail="screenshot/gui-qemu-migrate.png"]
If you have a cluster, you can migrate your VM to another host with
Copies and Clones
-----------------
-[thumbnail="gui-qemu-full-clone.png"]
+[thumbnail="screenshot/gui-qemu-full-clone.png"]
VM installation is usually done using an installation media (CD-ROM)
from the operation system vendor. Depending on the OS, this can be a
the disk images. If you want to change the template, create a linked
clone and modify that.
+VM Generation ID
+----------------
+
+{pve} supports Virtual Machine Generation ID ('vmgedid') footnote:[Official
+'vmgenid' Specification
+https://docs.microsoft.com/en-us/windows/desktop/hyperv_v2/virtual-machine-generation-identifier]
+for virtual machines.
+This can be used by the guest operating system to detect any event resulting
+in a time shift event, for example, restoring a backup or a snapshot rollback.
+
+When creating new VMs, a 'vmgenid' will be automatically generated and saved
+in its configuration file.
+
+To create and add a 'vmgenid' to an already existing VM one can pass the
+special value `1' to let {pve} autogenerate one or manually set the 'UUID'
+footnote:[Online GUID generator http://guid.one/] by using it as value,
+e.g.:
+
+----
+ qm set VMID -vmgenid 1
+ qm set VMID -vmgenid 00000000-0000-0000-0000-000000000000
+----
+
+In the rare case the 'vmgenid' mechanism is not wanted one can pass `0' for
+its value on VM creation, or retroactively delete the property in the
+configuration with:
+
+----
+ qm set VMID -delete vmgenid
+----
+
+The most prominent use case for 'vmgenid' are newer Microsoft Windows
+operating systems, which use it to avoid problems in time sensitive or
+replicate services (e.g., databases, domain controller) on snapshot
+rollback, backup restore or a whole VM clone operation.
+
Importing Virtual Machines and disk images
------------------------------------------
The VM is ready to be started.
+
+ifndef::wiki[]
+include::qm-cloud-init.adoc[]
+endif::wiki[]
+
+
+
Managing Virtual Machines with `qm`
------------------------------------
no longer running.
+ifdef::wiki[]
+
+See Also
+~~~~~~~~
+
+* link:/wiki/Cloud-Init_Support[Cloud-Init Support]
+
+endif::wiki[]
+
+
ifdef::manvolnum[]
Files
projects / pve-docs.git / blobdiff