+[[chapter_virtual_machines]]
ifdef::manvolnum[]
-PVE({manvolnum})
-================
-include::attributes.txt[]
+qm(1)
+=====
+:pve-toplevel:
NAME
----
qm - Qemu/KVM Virtual Machine Manager
-SYNOPSYS
+SYNOPSIS
--------
include::qm.1-synopsis.adoc[]
DESCRIPTION
-----------
endif::manvolnum[]
-
ifndef::manvolnum[]
Qemu/KVM Virtual Machines
=========================
-include::attributes.txt[]
+:pve-toplevel:
endif::manvolnum[]
-Managing Virtual Machines with 'qm'
+// deprecates
+// http://pve.proxmox.com/wiki/Container_and_Full_Virtualization
+// http://pve.proxmox.com/wiki/KVM
+// http://pve.proxmox.com/wiki/Qemu_Server
+
+Qemu (short form for Quick Emulator) is an open source hypervisor that emulates a
+physical computer. From the perspective of the host system where Qemu is
+running, Qemu is a user program which has access to a number of local resources
+like partitions, files, network cards which are then passed to an
+emulated computer which sees them as if they were real devices.
+
+A guest operating system running in the emulated computer accesses these
+devices, and runs as it were running on real hardware. For instance you can pass
+an iso image as a parameter to Qemu, and the OS running in the emulated computer
+will see a real CDROM inserted in a CD drive.
+
+Qemu can emulates a great variety of hardware from ARM to Sparc, but {pve} is
+only concerned with 32 and 64 bits PC clone emulation, since it represents the
+overwhelming majority of server hardware. The emulation of PC clones is also one
+of the fastest due to the availability of processor extensions which greatly
+speed up Qemu when the emulated architecture is the same as the host
+architecture.
+
+NOTE: You may sometimes encounter the term _KVM_ (Kernel-based Virtual Machine).
+It means that Qemu is running with the support of the virtualization processor
+extensions, via the Linux kvm module. In the context of {pve} _Qemu_ and
+_KVM_ can be use interchangeably as Qemu in {pve} will always try to load the kvm
+module.
+
+Qemu inside {pve} runs as a root process, since this is required to access block
+and PCI devices.
+
+
+Emulated devices and paravirtualized devices
+--------------------------------------------
+
+The PC hardware emulated by Qemu includes a mainboard, network controllers,
+scsi, ide and sata controllers, serial ports (the complete list can be seen in
+the `kvm(1)` man page) all of them emulated in software. All these devices
+are the exact software equivalent of existing hardware devices, and if the OS
+running in the guest has the proper drivers it will use the devices as if it
+were running on real hardware. This allows Qemu to runs _unmodified_ operating
+systems.
+
+This however has a performance cost, as running in software what was meant to
+run in hardware involves a lot of extra work for the host CPU. To mitigate this,
+Qemu can present to the guest operating system _paravirtualized devices_, where
+the guest OS recognizes it is running inside Qemu and cooperates with the
+hypervisor.
+
+Qemu relies on the virtio virtualization standard, and is thus able to presente
+paravirtualized virtio devices, which includes a paravirtualized generic disk
+controller, a paravirtualized network card, a paravirtualized serial port,
+a paravirtualized SCSI controller, etc ...
+
+It is highly recommended to use the virtio devices whenever you can, as they
+provide a big performance improvement. Using the virtio generic disk controller
+versus an emulated IDE controller will double the sequential write throughput,
+as measured with `bonnie++(8)`. Using the virtio network interface can deliver
+up to three times the throughput of an emulated Intel E1000 network card, as
+measured with `iperf(1)`. footnote:[See this benchmark on the KVM wiki
+http://www.linux-kvm.org/page/Using_VirtIO_NIC]
+
+
+[[qm_virtual_machines_settings]]
+Virtual Machines Settings
+-------------------------
+
+Generally speaking {pve} tries to choose sane defaults for virtual machines
+(VM). Make sure you understand the meaning of the settings you change, as it
+could incur a performance slowdown, or putting your data at risk.
+
+
+[[qm_general_settings]]
+General Settings
+~~~~~~~~~~~~~~~~
+
+[thumbnail="gui-create-vm-general.png"]
+
+General settings of a VM include
+
+* the *Node* : the physical server on which the VM will run
+* the *VM ID*: a unique number in this {pve} installation used to identify your VM
+* *Name*: a free form text string you can use to describe the VM
+* *Resource Pool*: a logical group of VMs
+
+
+[[qm_os_settings]]
+OS Settings
+~~~~~~~~~~~
+
+[thumbnail="gui-create-vm-os.png"]
+
+When creating a VM, setting the proper Operating System(OS) allows {pve} to
+optimize some low level parameters. For instance Windows OS expect the BIOS
+clock to use the local time, while Unix based OS expect the BIOS clock to have
+the UTC time.
+
+
+[[qm_hard_disk]]
+Hard Disk
+~~~~~~~~~
+
+Qemu can emulate a number of storage controllers:
+
+* the *IDE* controller, has a design which goes back to the 1984 PC/AT disk
+controller. Even if this controller has been superseded by more more designs,
+each and every OS you can think has support for it, making it a great choice
+if you want to run an OS released before 2003. You can connect up to 4 devices
+on this controller.
+
+* the *SATA* (Serial ATA) controller, dating from 2003, has a more modern
+design, allowing higher throughput and a greater number of devices to be
+connected. You can connect up to 6 devices on this controller.
+
+* the *SCSI* controller, designed in 1985, is commonly found on server grade
+hardware, and can connect up to 14 storage devices. {pve} emulates by default a
+LSI 53C895A controller.
++
+A SCSI controller of type _VirtIO SCSI_ is the recommended setting if you aim for
+performance and is automatically selected for newly created Linux VMs since
+{pve} 4.3. Linux distributions have support for this controller since 2012, and
+FreeBSD since 2014. For Windows OSes, you need to provide an extra iso
+containing the drivers during the installation.
+// https://pve.proxmox.com/wiki/Paravirtualized_Block_Drivers_for_Windows#During_windows_installation.
+If you aim at maximum performance, you can select a SCSI controller of type
+_VirtIO SCSI single_ which will allow you to select the *IO Thread* option.
+When selecting _VirtIO SCSI single_ Qemu will create a new controller for
+each disk, instead of adding all disks to the same controller.
+
+* The *Virtio* controller, also called virtio-blk to distinguish from
+the VirtIO SCSI controller, is an older type of paravirtualized controller
+which has been superseded in features by the Virtio SCSI Controller.
+
+[thumbnail="gui-create-vm-hard-disk.png"]
+On each controller you attach a number of emulated hard disks, which are backed
+by a file or a block device residing in the configured storage. The choice of
+a storage type will determine the format of the hard disk image. Storages which
+present block devices (LVM, ZFS, Ceph) will require the *raw disk image format*,
+whereas files based storages (Ext4, NFS, GlusterFS) will let you to choose
+either the *raw disk image format* or the *QEMU image format*.
+
+ * the *QEMU image format* is a copy on write format which allows snapshots, and
+ thin provisioning of the disk image.
+ * the *raw disk image* is a bit-to-bit image of a hard disk, similar to what
+ you would get when executing the `dd` command on a block device in Linux. This
+ format do not support thin provisioning or snapshotting by itself, requiring
+ cooperation from the storage layer for these tasks. It is however 10% faster
+ than the *QEMU image format*. footnote:[See this benchmark for details
+ http://events.linuxfoundation.org/sites/events/files/slides/CloudOpen2013_Khoa_Huynh_v3.pdf]
+ * the *VMware image format* only makes sense if you intend to import/export the
+ disk image to other hypervisors.
+
+Setting the *Cache* mode of the hard drive will impact how the host system will
+notify the guest systems of block write completions. The *No cache* default
+means that the guest system will be notified that a write is complete when each
+block reaches the physical storage write queue, ignoring the host page cache.
+This provides a good balance between safety and speed.
+
+If you want the {pve} backup manager to skip a disk when doing a backup of a VM,
+you can set the *No backup* option on that disk.
+
+If your storage supports _thin provisioning_ (see the storage chapter in the
+{pve} guide), and your VM has a *SCSI* controller you can activate the *Discard*
+option on the hard disks connected to that controller. With *Discard* enabled,
+when the filesystem of a VM marks blocks as unused after removing files, the
+emulated SCSI controller will relay this information to the storage, which will
+then shrink the disk image accordingly.
+
+.IO Thread
+The option *IO Thread* can only be used when using a disk with the
+*VirtIO* controller, or with the *SCSI* controller, when the emulated controller
+ type is *VirtIO SCSI single*.
+With this enabled, Qemu creates one I/O thread per storage controller,
+instead of a single thread for all I/O, so it increases performance when
+multiple disks are used and each disk has its own storage controller.
+Note that backups do not currently work with *IO Thread* enabled.
+
+
+[[qm_cpu]]
+CPU
+~~~
+
+[thumbnail="gui-create-vm-cpu.png"]
+
+A *CPU socket* is a physical slot on a PC motherboard where you can plug a CPU.
+This CPU can then contain one or many *cores*, which are independent
+processing units. Whether you have a single CPU socket with 4 cores, or two CPU
+sockets with two cores is mostly irrelevant from a performance point of view.
+However some software is licensed depending on the number of sockets you have in
+your machine, in that case it makes sense to set the number of of sockets to
+what the license allows you, and increase the number of cores.
+
+Increasing the number of virtual cpus (cores and sockets) will usually provide a
+performance improvement though that is heavily dependent on the use of the VM.
+Multithreaded applications will of course benefit from a large number of
+virtual cpus, as for each virtual cpu you add, Qemu will create a new thread of
+execution on the host system. If you're not sure about the workload of your VM,
+it is usually a safe bet to set the number of *Total cores* to 2.
+
+NOTE: It is perfectly safe to set the _overall_ number of total cores in all
+your VMs to be greater than the number of of cores you have on your server (ie.
+4 VMs with each 4 Total cores running in a 8 core machine is OK) In that case
+the host system will balance the Qemu execution threads between your server
+cores just like if you were running a standard multithreaded application.
+However {pve} will prevent you to allocate on a _single_ machine more vcpus than
+physically available, as this will only bring the performance down due to the
+cost of context switches.
+
+Qemu can emulate a number different of *CPU types* from 486 to the latest Xeon
+processors. Each new processor generation adds new features, like hardware
+assisted 3d rendering, random number generation, memory protection, etc ...
+Usually you should select for your VM a processor type which closely matches the
+CPU of the host system, as it means that the host CPU features (also called _CPU
+flags_ ) will be available in your VMs. If you want an exact match, you can set
+the CPU type to *host* in which case the VM will have exactly the same CPU flags
+as your host system.
+
+This has a downside though. If you want to do a live migration of VMs between
+different hosts, your VM might end up on a new system with a different CPU type.
+If the CPU flags passed to the guest are missing, the qemu process will stop. To
+remedy this Qemu has also its own CPU type *kvm64*, that {pve} uses by defaults.
+kvm64 is a Pentium 4 look a like CPU type, which has a reduced CPU flags set,
+but is guaranteed to work everywhere.
+
+In short, if you care about live migration and moving VMs between nodes, leave
+the kvm64 default. If you don’t care about live migration, set the CPU type to
+host, as in theory this will give your guests maximum performance.
+
+You can also optionally emulate a *NUMA* architecture in your VMs. The basics of
+the NUMA architecture mean that instead of having a global memory pool available
+to all your cores, the memory is spread into local banks close to each socket.
+This can bring speed improvements as the memory bus is not a bottleneck
+anymore. If your system has a NUMA architecture footnote:[if the command
+`numactl --hardware | grep available` returns more than one node, then your host
+system has a NUMA architecture] we recommend to activate the option, as this
+will allow proper distribution of the VM resources on the host system. This
+option is also required in {pve} to allow hotplugging of cores and RAM to a VM.
+
+If the NUMA option is used, it is recommended to set the number of sockets to
+the number of sockets of the host system.
+
+
+[[qm_memory]]
+Memory
+~~~~~~
+
+For each VM you have the option to set a fixed size memory or asking
+{pve} to dynamically allocate memory based on the current RAM usage of the
+host.
+
+.Fixed Memory Allocation
+[thumbnail="gui-create-vm-memory-fixed.png"]
+
+When choosing a *fixed size memory* {pve} will simply allocate what you
+specify to your VM.
+
+Even when using a fixed memory size, the ballooning device gets added to the
+VM, because it delivers useful information such as how much memory the guest
+really uses.
+In general, you should leave *ballooning* enabled, but if you want to disable
+it (e.g. for debugging purposes), simply uncheck
+*Ballooning* or set
+
+ balloon: 0
+
+in the configuration.
+
+.Automatic Memory Allocation
+[thumbnail="gui-create-vm-memory-dynamic.png", float="left"]
+
+// see autoballoon() in pvestatd.pm
+When choosing to *automatically allocate memory*, {pve} will make sure that the
+minimum amount you specified is always available to the VM, and if RAM usage on
+the host is below 80%, will dynamically add memory to the guest up to the
+maximum memory specified.
+
+When the host is becoming short on RAM, the VM will then release some memory
+back to the host, swapping running processes if needed and starting the oom
+killer in last resort. The passing around of memory between host and guest is
+done via a special `balloon` kernel driver running inside the guest, which will
+grab or release memory pages from the host.
+footnote:[A good explanation of the inner workings of the balloon driver can be found here https://rwmj.wordpress.com/2010/07/17/virtio-balloon/]
+
+When multiple VMs use the autoallocate facility, it is possible to set a
+*Shares* coefficient which indicates the relative amount of the free host memory
+that each VM shoud take. Suppose for instance you have four VMs, three of them
+running a HTTP server and the last one is a database server. To cache more
+database blocks in the database server RAM, you would like to prioritize the
+database VM when spare RAM is available. For this you assign a Shares property
+of 3000 to the database VM, leaving the other VMs to the Shares default setting
+of 1000. The host server has 32GB of RAM, and is curring using 16GB, leaving 32
+* 80/100 - 16 = 9GB RAM to be allocated to the VMs. The database VM will get 9 *
+3000 / (3000 + 1000 + 1000 + 1000) = 4.5 GB extra RAM and each HTTP server will
+get 1/5 GB.
+
+All Linux distributions released after 2010 have the balloon kernel driver
+included. For Windows OSes, the balloon driver needs to be added manually and can
+incur a slowdown of the guest, so we don't recommend using it on critical
+systems.
+// see https://forum.proxmox.com/threads/solved-hyper-threading-vs-no-hyper-threading-fixed-vs-variable-memory.20265/
+
+When allocating RAMs to your VMs, a good rule of thumb is always to leave 1GB
+of RAM available to the host.
+
+
+[[qm_network_device]]
+Network Device
+~~~~~~~~~~~~~~
+
+[thumbnail="gui-create-vm-network.png"]
+
+Each VM can have many _Network interface controllers_ (NIC), of four different
+types:
+
+ * *Intel E1000* is the default, and emulates an Intel Gigabit network card.
+ * the *VirtIO* paravirtualized NIC should be used if you aim for maximum
+performance. Like all VirtIO devices, the guest OS should have the proper driver
+installed.
+ * the *Realtek 8139* emulates an older 100 MB/s network card, and should
+only be used when emulating older operating systems ( released before 2002 )
+ * the *vmxnet3* is another paravirtualized device, which should only be used
+when importing a VM from another hypervisor.
+
+{pve} will generate for each NIC a random *MAC address*, so that your VM is
+addressable on Ethernet networks.
+
+The NIC you added to the VM can follow one of two differents models:
+
+ * in the default *Bridged mode* each virtual NIC is backed on the host by a
+_tap device_, ( a software loopback device simulating an Ethernet NIC ). This
+tap device is added to a bridge, by default vmbr0 in {pve}. In this mode, VMs
+have direct access to the Ethernet LAN on which the host is located.
+ * in the alternative *NAT mode*, each virtual NIC will only communicate with
+the Qemu user networking stack, where a builting router and DHCP server can
+provide network access. This built-in DHCP will serve adresses in the private
+10.0.2.0/24 range. The NAT mode is much slower than the bridged mode, and
+should only be used for testing.
+
+You can also skip adding a network device when creating a VM by selecting *No
+network device*.
+
+.Multiqueue
+If you are using the VirtIO driver, you can optionally activate the
+*Multiqueue* option. This option allows the guest OS to process networking
+packets using multiple virtual CPUs, providing an increase in the total number
+of packets transfered.
+
+//http://blog.vmsplice.net/2011/09/qemu-internals-vhost-architecture.html
+When using the VirtIO driver with {pve}, each NIC network queue is passed to the
+host kernel, where the queue will be processed by a kernel thread spawn by the
+vhost driver. With this option activated, it is possible to pass _multiple_
+network queues to the host kernel for each NIC.
+
+//https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Virtualization_Tuning_and_Optimization_Guide/sect-Virtualization_Tuning_Optimization_Guide-Networking-Techniques.html#sect-Virtualization_Tuning_Optimization_Guide-Networking-Multi-queue_virtio-net
+When using Multiqueue, it is recommended to set it to a value equal
+to the number of Total Cores of your guest. You also need to set in
+the VM the number of multi-purpose channels on each VirtIO NIC with the ethtool
+command:
+
+`ethtool -L eth0 combined X`
+
+where X is the number of the number of vcpus of the VM.
+
+You should note that setting the Multiqueue parameter to a value greater
+than one will increase the CPU load on the host and guest systems as the
+traffic increases. We recommend to set this option only when the VM has to
+process a great number of incoming connections, such as when the VM is running
+as a router, reverse proxy or a busy HTTP server doing long polling.
+
+
+USB Passthrough
+~~~~~~~~~~~~~~~
+
+There are two different types of USB passthrough devices:
+
+* Host USB passtrough
+* SPICE USB passthrough
+
+Host USB passthrough works by giving a VM a USB device of the host.
+This can either be done via the vendor- and product-id, or
+via the host bus and port.
+
+The vendor/product-id looks like this: *0123:abcd*,
+where *0123* is the id of the vendor, and *abcd* is the id
+of the product, meaning two pieces of the same usb device
+have the same id.
+
+The bus/port looks like this: *1-2.3.4*, where *1* is the bus
+and *2.3.4* is the port path. This represents the physical
+ports of your host (depending of the internal order of the
+usb controllers).
+
+If a device is present in a VM configuration when the VM starts up,
+but the device is not present in the host, the VM can boot without problems.
+As soon as the device/port ist available in the host, it gets passed through.
+
+WARNING: Using this kind of USB passthrough means that you cannot move
+a VM online to another host, since the hardware is only available
+on the host the VM is currently residing.
+
+The second type of passthrough is SPICE USB passthrough. This is useful
+if you use a SPICE client which supports it. If you add a SPICE USB port
+to your VM, you can passthrough a USB device from where your SPICE client is,
+directly to the VM (for example an input device or hardware dongle).
+
+
+[[qm_bios_and_uefi]]
+BIOS and UEFI
+~~~~~~~~~~~~~
+
+In order to properly emulate a computer, QEMU needs to use a firmware.
+By default QEMU uses *SeaBIOS* for this, which is an open-source, x86 BIOS
+implementation. SeaBIOS is a good choice for most standard setups.
+
+There are, however, some scenarios in which a BIOS is not a good firmware
+to boot from, e.g. if you want to do VGA passthrough. footnote:[Alex Williamson has a very good blog entry about this.
+http://vfio.blogspot.co.at/2014/08/primary-graphics-assignment-without-vga.html]
+In such cases, you should rather use *OVMF*, which is an open-source UEFI implemenation. footnote:[See the OVMF Project http://www.tianocore.org/ovmf/]
+
+If you want to use OVMF, there are several things to consider:
+
+In order to save things like the *boot order*, there needs to be an EFI Disk.
+This disk will be included in backups and snapshots, and there can only be one.
+
+You can create such a disk with the following command:
+
+ qm set <vmid> -efidisk0 <storage>:1,format=<format>
+
+Where *<storage>* is the storage where you want to have the disk, and
+*<format>* is a format which the storage supports. Alternatively, you can
+create such a disk through the web interface with 'Add' -> 'EFI Disk' in the
+hardware section of a VM.
+
+When using OVMF with a virtual display (without VGA passthrough),
+you need to set the client resolution in the OVMF menu(which you can reach
+with a press of the ESC button during boot), or you have to choose
+SPICE as the display type.
+
+[[qm_startup_and_shutdown]]
+Automatic Start and Shutdown of Virtual Machines
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+After creating your VMs, you probably want them to start automatically
+when the host system boots. For this you need to select the option 'Start at
+boot' from the 'Options' Tab of your VM in the web interface, or set it with
+the following command:
+
+ qm set <vmid> -onboot 1
+
+.Start and Shutdown Order
+
+[thumbnail="gui-qemu-edit-start-order.png"]
+
+In some case you want to be able to fine tune the boot order of your
+VMs, for instance if one of your VM is providing firewalling or DHCP
+to other guest systems. For this you can use the following
+parameters:
+
+* *Start/Shutdown order*: Defines the start order priority. E.g. set it to 1 if
+you want the VM to be the first to be started. (We use the reverse startup
+order for shutdown, so a machine with a start order of 1 would be the last to
+be shut down)
+* *Startup delay*: Defines the interval between this VM start and subsequent
+VMs starts . E.g. set it to 240 if you want to wait 240 seconds before starting
+other VMs.
+* *Shutdown timeout*: Defines the duration in seconds {pve} should wait
+for the VM to be offline after issuing a shutdown command.
+By default this value is set to 60, which means that {pve} will issue a
+shutdown request, wait 60s for the machine to be offline, and if after 60s
+the machine is still online will notify that the shutdown action failed.
+
+Please note that machines without a Start/Shutdown order parameter will always
+start after those where the parameter is set, and this parameter only
+makes sense between the machines running locally on a host, and not
+cluster-wide.
+
+
+[[qm_migration]]
+Migration
+---------
+
+[thumbnail="gui-qemu-migrate.png"]
+
+If you have a cluster, you can migrate your VM to another host with
+
+ qm migrate <vmid> <target>
+
+There are generally two mechanisms for this
+
+* Online Migration (aka Live Migration)
+* Offline Migration
+
+Online Migration
+~~~~~~~~~~~~~~~~
+
+When your VM is running and it has no local resources defined (such as disks
+on local storage, passed through devices, etc.) you can initiate a live
+migration with the -online flag.
+
+How it works
+^^^^^^^^^^^^
+
+This starts a Qemu Process on the target host with the 'incoming' flag, which
+means that the process starts and waits for the memory data and device states
+from the source Virtual Machine (since all other resources, e.g. disks,
+are shared, the memory content and device state are the only things left
+to transmit).
+
+Once this connection is established, the source begins to send the memory
+content asynchronously to the target. If the memory on the source changes,
+those sections are marked dirty and there will be another pass of sending data.
+This happens until the amount of data to send is so small that it can
+pause the VM on the source, send the remaining data to the target and start
+the VM on the target in under a second.
+
+Requirements
+^^^^^^^^^^^^
+
+For Live Migration to work, there are some things required:
+
+* The VM has no local resources (e.g. passed through devices, local disks, etc.)
+* The hosts are in the same {pve} cluster.
+* The hosts have a working (and reliable) network connection.
+* The target host must have the same or higher versions of the
+ {pve} packages. (It *might* work the other way, but this is never guaranteed)
+
+Offline Migration
+~~~~~~~~~~~~~~~~~
+
+If you have local resources, you can still offline migrate your VMs,
+as long as all disk are on storages, which are defined on both hosts.
+Then the migration will copy the disk over the network to the target host.
+
+[[qm_copy_and_clone]]
+Copies and Clones
+-----------------
+
+[thumbnail="gui-qemu-full-clone.png"]
+
+VM installation is usually done using an installation media (CD-ROM)
+from the operation system vendor. Depending on the OS, this can be a
+time consuming task one might want to avoid.
+
+An easy way to deploy many VMs of the same type is to copy an existing
+VM. We use the term 'clone' for such copies, and distinguish between
+'linked' and 'full' clones.
+
+Full Clone::
+
+The result of such copy is an independent VM. The
+new VM does not share any storage resources with the original.
++
+
+It is possible to select a *Target Storage*, so one can use this to
+migrate a VM to a totally different storage. You can also change the
+disk image *Format* if the storage driver supports several formats.
++
+
+NOTE: A full clone need to read and copy all VM image data. This is
+usually much slower than creating a linked clone.
++
+
+Some storage types allows to copy a specific *Snapshot*, which
+defaults to the 'current' VM data. This also means that the final copy
+never includes any additional snapshots from the original VM.
+
+
+Linked Clone::
+
+Modern storage drivers supports a way to generate fast linked
+clones. Such a clone is a writable copy whose initial contents are the
+same as the original data. Creating a linked clone is nearly
+instantaneous, and initially consumes no additional space.
++
+
+They are called 'linked' because the new image still refers to the
+original. Unmodified data blocks are read from the original image, but
+modification are written (and afterwards read) from a new
+location. This technique is called 'Copy-on-write'.
++
+
+This requires that the original volume is read-only. With {pve} one
+can convert any VM into a read-only <<qm_templates, Template>>). Such
+templates can later be used to create linked clones efficiently.
++
+
+NOTE: You cannot delete the original template while linked clones
+exists.
++
+
+It is not possible to change the *Target storage* for linked clones,
+because this is a storage internal feature.
+
+
+The *Target node* option allows you to create the new VM on a
+different node. The only restriction is that the VM is on shared
+storage, and that storage is also available on the target node.
+
+To avoid resource conflicts, all network interface MAC addresses gets
+randomized, and we generate a new 'UUID' for the VM BIOS (smbios1)
+setting.
+
+
+[[qm_templates]]
+Virtual Machine Templates
+-------------------------
+
+One can convert a VM into a Template. Such templates are read-only,
+and you can use them to create linked clones.
+
+NOTE: It is not possible to start templates, because this would modify
+the disk images. If you want to change the template, create a linked
+clone and modify that.
+
+
+Managing Virtual Machines with `qm`
------------------------------------
qm is the tool to manage Qemu/Kvm virtual machines on {pve}. You can
qm shutdown 300 && qm wait 300 -timeout 40
+
+[[qm_configuration]]
Configuration
-------------
-All configuration files consists of lines in the form
+VM configuration files are stored inside the Proxmox cluster file
+system, and can be accessed at `/etc/pve/qemu-server/<VMID>.conf`.
+Like other files stored inside `/etc/pve/`, they get automatically
+replicated to all other cluster nodes.
+
+NOTE: VMIDs < 100 are reserved for internal purposes, and VMIDs need to be
+unique cluster wide.
+
+.Example VM Configuration
+----
+cores: 1
+sockets: 1
+memory: 512
+name: webmail
+ostype: l26
+bootdisk: virtio0
+net0: e1000=EE:D2:28:5F:B6:3E,bridge=vmbr0
+virtio0: local:vm-100-disk-1,size=32G
+----
+
+Those configuration files are simple text files, and you can edit them
+using a normal text editor (`vi`, `nano`, ...). This is sometimes
+useful to do small corrections, but keep in mind that you need to
+restart the VM to apply such changes.
- PARAMETER: value
+For that reason, it is usually better to use the `qm` command to
+generate and modify those files, or do the whole thing using the GUI.
+Our toolkit is smart enough to instantaneously apply most changes to
+running VM. This feature is called "hot plug", and there is no
+need to restart the VM in that case.
-Configuration files are stored inside the Proxmox cluster file
-system, and can be access at '/etc/pve/qemu-server/<VMID>.conf'.
+File Format
+~~~~~~~~~~~
+
+VM configuration files use a simple colon separated key/value
+format. Each line has the following format:
+
+-----
+# this is a comment
+OPTION: value
+-----
+
+Blank lines in those files are ignored, and lines starting with a `#`
+character are treated as comments and are also ignored.
+
+
+[[qm_snapshots]]
+Snapshots
+~~~~~~~~~
+
+When you create a snapshot, `qm` stores the configuration at snapshot
+time into a separate snapshot section within the same configuration
+file. For example, after creating a snapshot called ``testsnapshot'',
+your configuration file will look like this:
+
+.VM configuration with snapshot
+----
+memory: 512
+swap: 512
+parent: testsnaphot
+...
+
+[testsnaphot]
+memory: 512
+swap: 512
+snaptime: 1457170803
+...
+----
+
+There are a few snapshot related properties like `parent` and
+`snaptime`. The `parent` property is used to store the parent/child
+relationship between snapshots. `snaptime` is the snapshot creation
+time stamp (Unix epoch).
+
+
+[[qm_options]]
Options
~~~~~~~
Locks
-----
-Online migrations and backups ('vzdump') set a lock to prevent incompatible
-concurrent actions on the affected VMs. Sometimes you need to remove such a
-lock manually (e.g., after a power failure).
+Online migrations, snapshots and backups (`vzdump`) set a lock to
+prevent incompatible concurrent actions on the affected VMs. Sometimes
+you need to remove such a lock manually (e.g., after a power failure).
qm unlock <vmid>
+CAUTION: Only do that if you are sure the action which set the lock is
+no longer running.
+
ifdef::manvolnum[]
+
+Files
+------
+
+`/etc/pve/qemu-server/<VMID>.conf`::
+
+Configuration file for the VM '<VMID>'.
+
+
include::pve-copyright.adoc[]
endif::manvolnum[]
projects / pve-docs.git / blobdiff