X-Git-Url: https://git.proxmox.com/?p=pve-docs.git;a=blobdiff_plain;f=pve-installation.adoc;h=7f5bcae02d6d965453bbe6bbb29f49d5824c575d;hp=28e86aad6c1c66d3aff4e98a4c6301f5158e3630;hb=145ee03acb8db9f8e2fb94c5e5f4885d9c955b5d;hpb=f77a3c104e3611ff0d42822a5300a12951b9d78e

diff --git a/pve-installation.adoc b/pve-installation.adoc
index 28e86aa..7f5bcae 100644
--- a/pve-installation.adoc
+++ b/pve-installation.adoc
@@ -1,5 +1,5 @@
 Installing Proxmox VE
----------------------
+=====================
 include::attributes.txt[]
 
 {pve} ships as a set of Debian packages, so you can simply install it
@@ -24,9 +24,15 @@ within a few minutes, including the following:
 * Complete toolset
 * Web based management interface
 
+ifndef::wiki[]
+
+include::pve-system-requirements.adoc[]
+
+endif::wiki[]
+
 
 Using the {pve} Installation CD-ROM
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-----------------------------------
 
 This is the preferred and recommended installation method.
 
@@ -59,7 +65,7 @@ BIOS is unable to read the boot block from the disk.
 
 Test Memory::
 
-Runs `memtest86+`. This is useful to check if your memory if
+Runs `memtest86+`. This is useful to check if your memory is
 functional and error free.
 
 You normally select *Install Proxmox VE* to start the installation.
@@ -74,9 +80,9 @@ ZFS supports several software RAID levels, so this is specially useful
 if you do not have a hardware RAID controller. The `Options` button
 lets you select the ZFS RAID level, and you can choose disks there.
 
-The next pages just asks for basic configuration options like time
+The next pages just ask for basic configuration options like time
 zone and keyboard layout. You also need to specify your email address
-and select a superuser password.
+and superuser (root) password (must have at least 5 characters).
 
 The last step is the network configuration. Please note that you can
 use either IPv4 or IPv6 here, but not both. If you want to configure a
@@ -88,8 +94,7 @@ then reboot the server.
 
 Further configuration is done via the Proxmox web interface. Just
 point your browser to the IP address given during installation
-(https://youripaddress:8006). {pve} is tested for IE9, Firefox 10
-and higher, and Google Chrome.
+(https://youripaddress:8006).
 
 NOTE: Default login is "root" (realm 'PAM') and the root password is
 defined during the installation process.
@@ -97,7 +102,7 @@ defined during the installation process.
 
 [[advanced_lvm_options]]
 Advanced LVM Configuration Options
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 The installer creates a Volume Group (VG) called `pve`, and additional
 Logical Volumes (LVs) called `root`, `data` and `swap`. The size of
@@ -121,8 +126,7 @@ system.
 
 `maxvz`::
 
-Define the size of the `data` volume, which is mounted at
-`/var/lib/vz`.
+Define the size of the `data` volume.
 
 `minfree`::
 
@@ -134,10 +138,11 @@ required for lvmthin snapshots).
 
 
 ZFS Performance Tips
-^^^^^^^^^^^^^^^^^^^^
+~~~~~~~~~~~~~~~~~~~~
 
-ZFS uses a lot of memory, so it is best to add additional 8-16GB RAM
-if you want to use ZFS.
+ZFS uses a lot of memory, so it is best to add additional RAM if you
+want to use ZFS. A good calculation is 4GB plus 1GB RAM for each TB
+RAW disk space.
 
 ZFS also provides the feature to use a fast SSD drive as write cache. The
 write cache is called the ZFS Intent Log (ZIL). You can add that after
@@ -149,17 +154,20 @@ installation using the following command:
 ifdef::wiki[]
 
 link:/wiki/Install_Proxmox_VE_on_Debian_Jessie[Install Proxmox VE on Debian Jessie]
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-----------------------------------------------------------------------------------
+
+link:/wiki/Install_from_USB_Stick[Install from USB Stick]
+---------------------------------------------------------
 
 endif::wiki[]
 
 ifndef::wiki[]
 
 Install {pve} on Debian
-~~~~~~~~~~~~~~~~~~~~~~~
+-----------------------
 
 {pve} ships as a set of Debian packages, so you can simply install it
-on top of a normal Debian installation.  After configuring the
+on top of a normal Debian installation. After configuring the
 repositories, you need to run:
 
 [source,bash]
@@ -168,16 +176,17 @@ apt-get update
 apt-get install proxmox-ve
 ----
 
-You can find a detailed step by step howto on the {pve}
-http://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Jessie[wiki].
+You can find a detailed step by step howto on the
+{webwiki-url}Install_Proxmox_VE_on_Debian_Jessie[wiki].
 
-endif::wiki[]
+include::pve-usbstick.adoc[]
 
+endif::wiki[]
 
 ifdef::wiki[]
 
 Video Tutorials
-~~~~~~~~~~~~~~~
+---------------
 
 * List of all official tutorials on our
   http://www.youtube.com/proxmoxve[Proxmox VE YouTube Channel]
@@ -188,7 +197,9 @@ Video Tutorials
 
 
 See Also
-~~~~~~~~
+--------
+
+* link:/wiki/System_Requirements[System Requirements]
 
 * link:/wiki/Package_Repositories[Package Repositories]
 
@@ -199,4 +210,3 @@ See Also
 * link:/wiki/Installation:_Tips_and_Tricks[Installation: Tips and Tricks]
 
 endif::wiki[]
-