X-Git-Url: https://git.proxmox.com/?p=pve-docs.git;a=blobdiff_plain;f=pveum.adoc;h=b0bb72afadd4c21f6252bb1ad1978a94947a9816;hp=8a8a6ae8c2852b72afcd0cc37db24124e79808cc;hb=a75eeddebed864bde81358463958ed1d166935e1;hpb=d66142027ae5b57219bc0295d68667afe5416b2d diff --git a/pveum.adoc b/pveum.adoc index 8a8a6ae..b0bb72a 100644 --- a/pveum.adoc +++ b/pveum.adoc @@ -1,7 +1,8 @@ +[[chapter_user_management]] ifdef::manvolnum[] -PVE({manvolnum}) -================ -include::attributes.txt[] +pveum(1) +======== +:pve-toplevel: NAME ---- @@ -9,7 +10,7 @@ NAME pveum - Proxmox VE User Manager -SYNOPSYS +SYNOPSIS -------- include::pveum.1-synopsis.adoc[] @@ -18,24 +19,64 @@ include::pveum.1-synopsis.adoc[] DESCRIPTION ----------- endif::manvolnum[] - ifndef::manvolnum[] User Management =============== -include::attributes.txt[] +:pve-toplevel: endif::manvolnum[] // Copied from pve wiki: Revision as of 16:10, 27 October 2015 -Proxmox VE supports multiple authentication sources, e.g. Microsoft -Active Directory, LDAP, Linux PAM or the integrated Proxmox VE -authentication server. +Proxmox VE supports multiple authentication sources, e.g. Linux PAM, +an integrated Proxmox VE authentication server, LDAP, Microsoft Active +Directory. By using the role based user- and permission management for all objects (VMs, storages, nodes, etc.) granular access can be defined. -[[authentication-realms]] +[[pveum_users]] +Users +----- + +{pve} stores user attributes in `/etc/pve/user.cfg`. +Passwords are not stored here, users are instead associated with +<> described below. +Therefore a user is internally often identified by its name and +realm in the form `@`. + +Each user entry in this file contains the following information: + +* First name +* Last name +* E-mail address +* Group memberships +* An optional Expiration date +* A comment or note about this user +* Whether this user is enabled or disabled +* Optional two factor authentication keys + + +System administrator +~~~~~~~~~~~~~~~~~~~~ + +The system's root user can always log in via the Linux PAM realm and is an +unconfined administrator. This user cannot be deleted, but attributes can +still be changed and system mails will be sent to the email address +assigned to this user. + + +[[pveum_groups]] +Groups +~~~~~~ + +Each user can be member of several groups. Groups are the preferred +way to organize access permissions. You should always grant permission +to groups instead of using individual users. That way you will get a +much shorter access control list which is easier to handle. + + +[[pveum_authentication_realms]] Authentication Realms --------------------- @@ -44,7 +85,7 @@ realm, the realms have to be configured in `/etc/pve/domains.cfg`. The following realms (authentication methods) are available: Linux PAM standard authentication:: -In this case a system user has to exist (eg. created via the `adduser` +In this case a system user has to exist (e.g. created via the `adduser` command) on all nodes the user is allowed to login, and the user authenticates with their usual system password. + @@ -59,13 +100,13 @@ usermod -a -G watchman heinz Proxmox VE authentication server:: This is a unix like password store (`/etc/pve/priv/shadow.cfg`). Password are encrypted using the SHA-256 hash method. -This is the most convenient method for for small (or even medium) +This is the most convenient method for small (or even medium) installations where users do not need access to anything outside of {pve}. In this case users are fully managed by {pve} and are able to change their own passwords via the GUI. LDAP:: -It is possible to authenticate users via an LDAP server (eq. +It is possible to authenticate users via an LDAP server (e.g. openldap). The server and an optional fallback server can be configured and the connection can be encrypted via SSL. + @@ -96,7 +137,7 @@ If {pve} needs to authenticate (bind) to the ldap server before being able to query and authenticate users, a bind domain name can be configured via the `bind_dn` property in `/etc/pve/domains.cfg`. Its password then has to be stored in `/etc/pve/priv/ldap/.pw` -(eg. `/etc/pve/priv/ldap/my-ldap.pw`). This file should contain a +(e.g. `/etc/pve/priv/ldap/my-ldap.pw`). This file should contain a single line containing the raw password. Microsoft Active Directory:: @@ -106,51 +147,90 @@ ldap an optional fallback server, optional port, and SSL encryption can be configured. -Terms and Definitions ---------------------- +Two factor authentication +------------------------- +Each realm can optionally be secured additionally by two factor +authentication. This can be done by selecting one of the available methods +via the 'TFA' dropdown box when adding or editing an Authentication Realm. +When a realm has TFA enabled it becomes a requirement and only users with +configured TFA will be able to login. -Users -~~~~~ +Currently there are two methods available: -A Proxmox VE user name consists of two parts: `@`. The -login screen on the GUI shows them a separate items, but it is -internally used as single string. +Time based OATH (TOTP):: +This uses the standard HMAC-SHA1 algorithm where the current time is hashed +with the user's configured key. The time step and password length +parameters are configured. ++ +A user can have multiple keys configured (separated by spaces), and the +keys can be specified in Base32 (RFC3548) or hexadecimal notation. ++ +{pve} provides a key generation tool (`oathkeygen`) which prints out a +random key in Base32 notation which can be used directly with various OTP +tools, such as the `oathtool` command line tool, the Google authenticator +or FreeOTP Android apps. + +YubiKey OTP:: +For authenticating via a YubiKey a Yubico API ID, API KEY and validation +server URL must be configured, and users must have a YubiKey available. In +order to get the key ID from a YubiKey, you can trigger the YubiKey once +after connecting it to USB and copy the first 12 characters of the typed +password into the user's 'Key IDs' field. ++ +Please refer to the +https://developers.yubico.com/OTP/[YubiKey OTP] documentation for how to use the +https://www.yubico.com/products/services-software/yubicloud/[YubiCloud] or +https://developers.yubico.com/Software_Projects/YubiKey_OTP/YubiCloud_Validation_Servers/[ +host your own verification server]. -We store the following attribute for users (`/etc/pve/user.cfg`): -* first name -* last name -* email address -* expiration date -* flag to enable/disable account -* comment +[[pveum_permission_management]] +Permission Management +--------------------- +In order for a user to perform an action (such as listing, modifying or +deleting a parts of a VM configuration), the user needs to have the +appropriate permissions. -Superuser -^^^^^^^^^ +{pve} uses a role and path based permission management system. An entry in +the permissions table allows a user or group to take on a specific role +when accessing an 'object' or 'path'. This means an such an access rule can +be represented as a triple of '(path, user, role)' or '(path, group, +role)', with the role containing a set of allowed actions, and the path +representing the target of these actions. -The traditional unix superuser account is called `root@pam`. All -system mails are forwarded to the email assigned to that account. +[[pveum_roles]] +Roles +~~~~~ -Groups -~~~~~~ +A role is simply a list of privileges. Proxmox VE comes with a number +of predefined roles which satisfies most needs. -Each user can be member of several groups. Groups are the preferred -way to organize access permissions. You should always grant permission -to groups instead of using individual users. That way you will get a -much shorter access control list which is easier to handle. +* `Administrator`: has all privileges +* `NoAccess`: has no privileges (used to forbid access) +* `PVEAdmin`: can do most things, but miss rights to modify system settings (`Sys.PowerMgmt`, `Sys.Modify`, `Realm.Allocate`). +* `PVEAuditor`: read only access +* `PVEDatastoreAdmin`: create and allocate backup space and templates +* `PVEDatastoreUser`: allocate backup space and view storage +* `PVEPoolAdmin`: allocate pools +* `PVESysAdmin`: User ACLs, audit, system console and system logs +* `PVETemplateUser`: view and clone templates +* `PVEUserAdmin`: user administration +* `PVEVMAdmin`: fully administer VMs +* `PVEVMUser`: view, backup, config CDROM, VM console, VM power management +You can see the whole set of predefined roles on the GUI. -Objects and Paths -~~~~~~~~~~~~~~~~~ +Adding new roles can be done via both GUI and the command line, like +this: -Access permissions are assigned to objects, such as a virtual machines -(`/vms/{vmid}`) or a storage (`/storage/{storeid}`) or a pool of -resources (`/pool/{poolname}`). We use file system like paths to -address those objects. Those paths form a natural tree, and -permissions can be inherited down that hierarchy. +[source,bash] +---- +pveum roleadd PVE_Power-only -privs "VM.PowerMgmt VM.Console" +pveum roleadd Sys_Power-only -privs "Sys.PowerMgmt Sys.Console" +---- Privileges @@ -158,7 +238,8 @@ Privileges A privilege is the right to perform a specific action. To simplify management, lists of privileges are grouped into roles, which can then -be uses to set permissions. +be used in the permission table. Note that privileges cannot directly be +assigned to users and paths without being part of a role. We currently use the following privileges: @@ -168,7 +249,7 @@ Node / System related privileges:: * `Sys.PowerMgmt`: Node power management (start, stop, reset, shutdown, ...) * `Sys.Console`: console access to Node * `Sys.Syslog`: view Syslog -* `Sys.Audit`: view node status/config +* `Sys.Audit`: view node status/config, Corosync cluster config and HA config * `Sys.Modify`: create/remove/modify node network parameters * `Group.Allocate`: create/remove/modify groups * `Pool.Allocate`: create/remove/modify a pool @@ -203,48 +284,33 @@ Storage related privileges:: * `Datastore.Audit`: view/browse a datastore -Roles -~~~~~ - -A role is simply a list of privileges. Proxmox VE comes with a number -of predefined roles which satisfies most needs. - -* `Administrator`: has all privileges -* `NoAccess`: has no privileges (used to forbid access) -* `PVEAdmin`: can do most things, but miss rights to modify system settings (`Sys.PowerMgmt`, `Sys.Modify`, `Realm.Allocate`). -* `PVEAuditor`: read only access -* `PVEDatastoreAdmin`: create and allocate backup space and templates -* `PVEDatastoreUser`: allocate backup space and view storage -* `PVEPoolAdmin`: allocate pools -* `PVESysAdmin`: User ACLs, audit, system console and system logs -* `PVETemplateUser`: view and clone templates -* `PVEUserAdmin`: user administration -* `PVEVMAdmin`: fully administer VMs -* `PVEVMUser`: view, backup, config CDROM, VM console, VM power management - -You can see the whole set of predefined roles on the GUI. - -Adding new roles using the CLI: - -[source,bash] ----- -pveum roleadd PVE_Power-only -privs "VM.PowerMgmt VM.Console" -pveum roleadd Sys_Power-only -privs "Sys.PowerMgmt Sys.Console" ----- +Objects and Paths +~~~~~~~~~~~~~~~~~ +Access permissions are assigned to objects, such as a virtual machines, +storages or pools of resources. +We use file system like paths to address these objects. These paths form a +natural tree, and permissions of higher levels (shorter path) can +optionally be propagated down within this hierarchy. -Permissions -~~~~~~~~~~~ +[[pveum_templated_paths]] +Paths can be templated. When an API call requires permissions on a +templated path, the path may contain references to parameters of the API +call. These references are specified in curly braces. Some parameters are +implicitly taken from the API call's URI. For instance the permission path +`/nodes/{node}` when calling '/nodes/mynode/status' requires permissions on +`/nodes/mynode`, while the path `{path}` in a PUT request to `/access/acl` +refers to the method's `path` parameter. -Permissions are the way we control access to objects. In technical -terms they are simply a triple containing ``. This -concept is also known as access control lists. Each permission -specifies a subject (user or group) and a role (set of privileges) on -a specific path. +Some examples are: -When a subject requests an action on an object, the framework looks up -the roles assigned to that subject (using the object path). The set of -roles defines the granted privileges. +* `/nodes/{node}`: Access to {pve} server machines +* `/vms`: Covers all VMs +* `/vms/{vmid}`: Access to specific VMs +* `/storage/{storeid}`: Access to a storages +* `/pool/{poolname}`: Access to VMs part of a <> +* `/access/groups`: Group administration +* `/access/realms/{realmid}`: Administrative access to realms Inheritance @@ -254,18 +320,12 @@ As mentioned earlier, object paths form a file system like tree, and permissions can be inherited down that tree (the propagate flag is set by default). We use the following inheritance rules: -* permission for individual users always overwrite group permission. -* permission for groups apply when the user is member of that group. -* permission set at higher level always overwrites inherited permissions. - - -What permission do I need? -^^^^^^^^^^^^^^^^^^^^^^^^^^ - -The required API permissions are documented for each individual -method, and can be found at http://pve.proxmox.com/pve-docs/api-viewer/ +* Permissions for individual users always replace group permissions. +* Permissions for groups apply when the user is member of that group. +* Permissions replace the ones inherited from an upper level. +[[pveum_pools]] Pools ~~~~~ @@ -274,6 +334,64 @@ stores. You can then simply set permissions on pools (`/pool/{poolid}`), which are inherited to all pool members. This is a great way simplify access control. + +What permission do I need? +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The required API permissions are documented for each individual +method, and can be found at http://pve.proxmox.com/pve-docs/api-viewer/ + +The permissions are specified as a list which can be interpreted as a +tree of logic and access-check functions: + +`["and", ...]` and `["or", ...]`:: +Each(`and`) or any(`or`) further element in the current list has to be true. + +`["perm", , [ ... ], ...]`:: +The `path` is a templated parameter (see +<>). All (or , if the `any` +option is used, any) of the listed +privileges must be allowed on the specified path. If a `require-param` +option is specified, then its specified parameter is required even if the +API call's schema otherwise lists it as being optional. + +`["userid-group", [ ... ], ...]`:: +The caller must have any of the listed privileges on `/access/groups`. In +addition there are two possible checks depending on whether the +`groups_param` option is set: ++ +* `groups_param` is set: The API call has a non-optional `groups` parameter +and the caller must have any of the listed privileges on all of the listed +groups. +* `groups_param` is not set: The user passed via the `userid` parameter +must exist and be part of a group on which the caller has any of the listed +privileges (via the `/access/groups/` path). + +`["userid-param", "self"]`:: +The value provided for the API call's `userid` parameter must refer to the +user performing the action. (Usually in conjunction with `or`, to allow +users to perform an action on themselves even if they don't have elevated +privileges.) + +`["userid-param", "Realm.AllocateUser"]`:: +The user needs `Realm.AllocateUser` access to `/access/realm/`, with +`` referring to the realm of the user passed via the `userid` +parameter. Note that the user does not need to exist in order to be +associated with a realm, since user IDs are passed in the form of +`@`. + +`["perm-modify", ]`:: +The `path` is a templated parameter (see +<>). The user needs either the +`Permissions.Modify` privilege, or, +depending on the path, the following privileges as a possible substitute: ++ +* `/storage/...`: additionally requires 'Datastore.Allocate` +* `/vms/...`: additionally requires 'VM.Allocate` +* `/pool/...`: additionally requires 'Pool.Allocate` ++ +If the path is empty, `Permission.Modify` on `/access` is required. + Command Line Tool ----------------- @@ -365,7 +483,7 @@ Example1: Allow user `joe@pve` to see all virtual machines Delegate User Management ~~~~~~~~~~~~~~~~~~~~~~~~ -If you want to delegate user managenent to user `joe@pve` you can do +If you want to delegate user management to user `joe@pve` you can do that with: [source,bash]