pct.adoc: move pct_startup_and_shutdown to correct section

diff --git a/pct.adoc b/pct.adoc
index 1c2787887c087a3c21b599461678b618c4188157..b3659c4fcdd8b6f97d690fc21be302a18279f164 100644 (file)
--- a/pct.adoc
+++ b/pct.adoc
@@ -507,6 +507,39 @@ they can contain the following setting:
 include::pct-network-opts.adoc[]
 
 
+[[pct_startup_and_shutdown]]
+Automatic Start and Shutdown of Containers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+After creating your containers, you probably want them to start automatically
+when the host system boots. For this you need to select the option 'Start at
+boot' from the 'Options' Tab of your container in the web interface, or set it with
+the following command:
+
+ pct set <ctid> -onboot 1
+
+If you want to fine tune the boot order of your containers, you can use the following
+parameters :
+
+* *Start/Shutdown order*: Defines the start order priority. E.g. set it to 1 if
+you want the CT to be the first to be started. (We use the reverse startup
+order for shutdown, so a container with a start order of 1 would be the last to
+be shut down)
+* *Startup delay*: Defines the interval between this container start and subsequent
+containers starts . E.g. set it to 240 if you want to wait 240 seconds before starting
+other containers.
+* *Shutdown timeout*: Defines the duration in seconds {pve} should wait
+for the container to be offline after issuing a shutdown command.
+By default this value is set to 60, which means that {pve} will issue a
+shutdown request, wait 60s for the machine to be offline, and if after 60s
+the machine is still online will notify that the shutdown action failed.
+
+Please note that containers without a Start/Shutdown order parameter will always
+start after those where the parameter is set, and this parameter only
+makes sense between the machines running locally on a host, and not
+cluster-wide.
+
+
 Backup and Restore
 ------------------
 
@@ -574,37 +607,6 @@ individually
 * Redistribute backed up files according to new mount point scheme
 * Restore to device and/or bind mount points (limited to root user)
 
-[[pct_startup_and_shutdown]]
-Automatic Start and Shutdown of Containers
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-After creating your containers, you probably want them to start automatically
-when the host system boots. For this you need to select the option 'Start at
-boot' from the 'Options' Tab of your container in the web interface, or set it with
-the following command:
-
- pct set <ctid> -onboot 1
-
-If you want to fine tune the boot order of your containers, you can use the following
-parameters :
-
-* *Start/Shutdown order*: Defines the start order priority. E.g. set it to 1 if
-you want the CT to be the first to be started. (We use the reverse startup
-order for shutdown, so a container with a start order of 1 would be the last to
-be shut down)
-* *Startup delay*: Defines the interval between this container start and subsequent
-containers starts . E.g. set it to 240 if you want to wait 240 seconds before starting
-other containers.
-* *Shutdown timeout*: Defines the duration in seconds {pve} should wait
-for the container to be offline after issuing a shutdown command.
-By default this value is set to 60, which means that {pve} will issue a
-shutdown request, wait 60s for the machine to be offline, and if after 60s
-the machine is still online will notify that the shutdown action failed.
-
-Please note that containers without a Start/Shutdown order parameter will always
-start after those where the parameter is set, and this parameter only
-makes sense between the machines running locally on a host, and not
-cluster-wide.
 
 Managing Containers with `pct`
 ------------------------------