1 package PVE
::QemuServer
;
22 use Storable
qw(dclone);
23 use PVE
::Exception
qw(raise raise_param_exc);
25 use PVE
::Tools
qw(run_command lock_file lock_file_full file_read_firstline dir_glob_foreach $IPV6RE);
26 use PVE
::JSONSchema
qw(get_standard_option);
27 use PVE
::Cluster
qw(cfs_register_file cfs_read_file cfs_write_file cfs_lock_file);
32 use PVE
::RPCEnvironment
;
33 use PVE
::GuestHelpers
;
34 use PVE
::QemuServer
::PCI
qw(print_pci_addr print_pcie_addr);
35 use PVE
::QemuServer
::Memory
;
36 use PVE
::QemuServer
::USB
qw(parse_usb_device);
37 use PVE
::QemuServer
::Cloudinit
;
40 use Time
::HiRes
qw(gettimeofday);
41 use File
::Copy
qw(copy);
44 my $EDK2_FW_BASE = '/usr/share/pve-edk2-firmware/';
47 "$EDK2_FW_BASE/OVMF_CODE.fd",
48 "$EDK2_FW_BASE/OVMF_VARS.fd"
51 "$EDK2_FW_BASE/AAVMF_CODE.fd",
52 "$EDK2_FW_BASE/AAVMF_VARS.fd"
56 my $qemu_snap_storage = {rbd
=> 1, sheepdog
=> 1};
58 my $cpuinfo = PVE
::ProcFSTools
::read_cpuinfo
();
60 my $QEMU_FORMAT_RE = qr/raw|cow|qcow|qcow2|qed|vmdk|cloop/;
62 # Note about locking: we use flock on the config file protect
63 # against concurent actions.
64 # Aditionaly, we have a 'lock' setting in the config file. This
65 # can be set to 'migrate', 'backup', 'snapshot' or 'rollback'. Most actions are not
66 # allowed when such lock is set. But you can ignore this kind of
67 # lock with the --skiplock flag.
69 cfs_register_file
('/qemu-server/',
73 PVE
::JSONSchema
::register_standard_option
('pve-qm-stateuri', {
74 description
=> "Some command save/restore state from this location.",
80 PVE
::JSONSchema
::register_standard_option
('pve-snapshot-name', {
81 description
=> "The name of the snapshot.",
82 type
=> 'string', format
=> 'pve-configid',
86 PVE
::JSONSchema
::register_standard_option
('pve-qm-image-format', {
88 enum
=> [qw(raw cow qcow qed qcow2 vmdk cloop)],
89 description
=> "The drive's backing file's data format.",
93 PVE
::JSONSchema
::register_standard_option
('pve-qemu-machine', {
94 description
=> "Specifies the Qemu machine type.",
96 pattern
=> '(pc|pc(-i440fx)?-\d+\.\d+(\.pxe)?|q35|pc-q35-\d+\.\d+(\.pxe)?|virt(?:-\d+\.\d+)?)',
101 #no warnings 'redefine';
104 my ($controller, $vmid, $option, $value) = @_;
106 my $path = "/sys/fs/cgroup/$controller/qemu.slice/$vmid.scope/$option";
107 PVE
::ProcFSTools
::write_proc_entry
($path, $value);
111 my $nodename = PVE
::INotify
::nodename
();
113 mkdir "/etc/pve/nodes/$nodename";
114 my $confdir = "/etc/pve/nodes/$nodename/qemu-server";
117 my $var_run_tmpdir = "/var/run/qemu-server";
118 mkdir $var_run_tmpdir;
120 my $lock_dir = "/var/lock/qemu-server";
123 my $cpu_vendor_list = {
125 486 => 'GenuineIntel',
126 pentium
=> 'GenuineIntel',
127 pentium2
=> 'GenuineIntel',
128 pentium3
=> 'GenuineIntel',
129 coreduo
=> 'GenuineIntel',
130 core2duo
=> 'GenuineIntel',
131 Conroe
=> 'GenuineIntel',
132 Penryn
=> 'GenuineIntel',
133 Nehalem
=> 'GenuineIntel',
134 'Nehalem-IBRS' => 'GenuineIntel',
135 Westmere
=> 'GenuineIntel',
136 'Westmere-IBRS' => 'GenuineIntel',
137 SandyBridge
=> 'GenuineIntel',
138 'SandyBridge-IBRS' => 'GenuineIntel',
139 IvyBridge
=> 'GenuineIntel',
140 'IvyBridge-IBRS' => 'GenuineIntel',
141 Haswell
=> 'GenuineIntel',
142 'Haswell-IBRS' => 'GenuineIntel',
143 'Haswell-noTSX' => 'GenuineIntel',
144 'Haswell-noTSX-IBRS' => 'GenuineIntel',
145 Broadwell
=> 'GenuineIntel',
146 'Broadwell-IBRS' => 'GenuineIntel',
147 'Broadwell-noTSX' => 'GenuineIntel',
148 'Broadwell-noTSX-IBRS' => 'GenuineIntel',
149 'Skylake-Client' => 'GenuineIntel',
150 'Skylake-Client-IBRS' => 'GenuineIntel',
151 'Skylake-Server' => 'GenuineIntel',
152 'Skylake-Server-IBRS' => 'GenuineIntel',
155 athlon
=> 'AuthenticAMD',
156 phenom
=> 'AuthenticAMD',
157 Opteron_G1
=> 'AuthenticAMD',
158 Opteron_G2
=> 'AuthenticAMD',
159 Opteron_G3
=> 'AuthenticAMD',
160 Opteron_G4
=> 'AuthenticAMD',
161 Opteron_G5
=> 'AuthenticAMD',
162 EPYC
=> 'AuthenticAMD',
163 'EPYC-IBPB' => 'AuthenticAMD',
165 # generic types, use vendor from host node
174 my $cpu_flag = qr/[+-](pcid|spec-ctrl|ibpb|ssbd|virt-ssbd|amd-ssbd|amd-no-ssb|pdpe1gb)/;
178 description
=> "Emulated CPU type.",
180 enum
=> [ sort { "\L$a" cmp "\L$b" } keys %$cpu_vendor_list ],
185 description
=> "Do not identify as a KVM virtual machine.",
192 pattern
=> qr/[a-zA-Z0-9]{1,12}/,
193 format_description
=> 'vendor-id',
194 description
=> 'The Hyper-V vendor ID. Some drivers or programs inside Windows guests need a specific ID.',
198 description
=> "List of additional CPU flags separated by ';'."
199 . " Use '+FLAG' to enable, '-FLAG' to disable a flag."
200 . " Currently supported flags: 'pcid', 'spec-ctrl', 'ibpb', 'ssbd', 'virt-ssbd', 'amd-ssbd', 'amd-no-ssb', 'pdpe1gb'.",
201 format_description
=> '+FLAG[;-FLAG...]',
203 pattern
=> qr/$cpu_flag(;$cpu_flag)*/,
212 enum
=> [qw(i6300esb ib700)],
213 description
=> "Watchdog type to emulate.",
214 default => 'i6300esb',
219 enum
=> [qw(reset shutdown poweroff pause debug none)],
220 description
=> "The action to perform if after activation the guest fails to poll the watchdog in time.",
224 PVE
::JSONSchema
::register_format
('pve-qm-watchdog', $watchdog_fmt);
228 description
=> "Enable/disable Qemu GuestAgent.",
233 fstrim_cloned_disks
=> {
234 description
=> "Run fstrim after cloning/moving a disk.",
243 description
=> "Select the VGA type.",
248 enum
=> [qw(cirrus qxl qxl2 qxl3 qxl4 none serial0 serial1 serial2 serial3 std virtio vmware)],
251 description
=> "Sets the VGA memory (in MiB). Has no effect with serial display.",
263 description
=> "The size of the file in MB.",
267 pattern
=> '[a-zA-Z0-9\-]+',
269 format_description
=> 'string',
270 description
=> "The name of the file. Will be prefixed with 'pve-shm-'. Default is the VMID. Will be deleted when the VM is stopped.",
278 description
=> "Specifies whether a VM will be started during system bootup.",
284 description
=> "Automatic restart after crash (currently ignored).",
289 type
=> 'string', format
=> 'pve-hotplug-features',
290 description
=> "Selectively enable hotplug features. This is a comma separated list of hotplug features: 'network', 'disk', 'cpu', 'memory' and 'usb'. Use '0' to disable hotplug completely. Value '1' is an alias for the default 'network,disk,usb'.",
291 default => 'network,disk,usb',
296 description
=> "Allow reboot. If set to '0' the VM exit on reboot.",
302 description
=> "Lock/unlock the VM.",
303 enum
=> [qw(backup clone create migrate rollback snapshot snapshot-delete)],
308 description
=> "Limit of CPU usage.",
309 verbose_description
=> "Limit of CPU usage.\n\nNOTE: If the computer has 2 CPUs, it has total of '2' CPU time. Value '0' indicates no CPU limit.",
317 description
=> "CPU weight for a VM.",
318 verbose_description
=> "CPU weight for a VM. Argument is used in the kernel fair scheduler. The larger the number is, the more CPU time this VM gets. Number is relative to weights of all the other running VMs.",
326 description
=> "Amount of RAM for the VM in MB. This is the maximum available memory when you use the balloon device.",
333 description
=> "Amount of target RAM for the VM in MB. Using zero disables the ballon driver.",
339 description
=> "Amount of memory shares for auto-ballooning. The larger the number is, the more memory this VM gets. Number is relative to weights of all other running VMs. Using zero disables auto-ballooning. Auto-ballooning is done by pvestatd.",
347 description
=> "Keybord layout for vnc server. Default is read from the '/etc/pve/datacenter.cfg' configuration file.".
348 "It should not be necessary to set it.",
349 enum
=> PVE
::Tools
::kvmkeymaplist
(),
354 type
=> 'string', format
=> 'dns-name',
355 description
=> "Set a name for the VM. Only used on the configuration web interface.",
360 description
=> "SCSI controller model",
361 enum
=> [qw(lsi lsi53c810 virtio-scsi-pci virtio-scsi-single megasas pvscsi)],
367 description
=> "Description for the VM. Only used on the configuration web interface. This is saved as comment inside the configuration file.",
372 enum
=> [qw(other wxp w2k w2k3 w2k8 wvista win7 win8 win10 l24 l26 solaris)],
373 description
=> "Specify guest operating system.",
374 verbose_description
=> <<EODESC,
375 Specify guest operating system. This is used to enable special
376 optimization/features for specific operating systems:
379 other;; unspecified OS
380 wxp;; Microsoft Windows XP
381 w2k;; Microsoft Windows 2000
382 w2k3;; Microsoft Windows 2003
383 w2k8;; Microsoft Windows 2008
384 wvista;; Microsoft Windows Vista
385 win7;; Microsoft Windows 7
386 win8;; Microsoft Windows 8/2012/2012r2
387 win10;; Microsoft Windows 10/2016
388 l24;; Linux 2.4 Kernel
389 l26;; Linux 2.6/3.X Kernel
390 solaris;; Solaris/OpenSolaris/OpenIndiania kernel
396 description
=> "Boot on floppy (a), hard disk (c), CD-ROM (d), or network (n).",
397 pattern
=> '[acdn]{1,4}',
402 type
=> 'string', format
=> 'pve-qm-bootdisk',
403 description
=> "Enable booting from specified disk.",
404 pattern
=> '(ide|sata|scsi|virtio)\d+',
409 description
=> "The number of CPUs. Please use option -sockets instead.",
416 description
=> "The number of CPU sockets.",
423 description
=> "The number of cores per socket.",
430 description
=> "Enable/disable NUMA.",
436 description
=> "Enable/disable hugepages memory.",
437 enum
=> [qw(any 2 1024)],
442 description
=> "Number of hotplugged vcpus.",
449 description
=> "Enable/disable ACPI.",
454 description
=> "Enable/disable Qemu GuestAgent and its properties.",
456 format
=> $agent_fmt,
461 description
=> "Enable/disable KVM hardware virtualization.",
467 description
=> "Enable/disable time drift fix.",
473 description
=> "Set the real time clock to local time. This is enabled by default if ostype indicates a Microsoft OS.",
478 description
=> "Freeze CPU at startup (use 'c' monitor command to start execution).",
482 type
=> 'string', format
=> $vga_fmt,
483 description
=> "Configure the VGA hardware.",
484 verbose_description
=> "Configure the VGA Hardware. If you want to use ".
485 "high resolution modes (>= 1280x1024x16) you may need to increase " .
486 "the vga memory option. Since QEMU 2.9 the default VGA display type " .
487 "is 'std' for all OS types besides some Windows versions (XP and " .
488 "older) which use 'cirrus'. The 'qxl' option enables the SPICE " .
489 "display server. For win* OS you can select how many independent " .
490 "displays you want, Linux guests can add displays them self.\n".
491 "You can also run without any graphic card, using a serial device as terminal.",
495 type
=> 'string', format
=> 'pve-qm-watchdog',
496 description
=> "Create a virtual hardware watchdog device.",
497 verbose_description
=> "Create a virtual hardware watchdog device. Once enabled" .
498 " (by a guest action), the watchdog must be periodically polled " .
499 "by an agent inside the guest or else the watchdog will reset " .
500 "the guest (or execute the respective action specified)",
505 typetext
=> "(now | YYYY-MM-DD | YYYY-MM-DDTHH:MM:SS)",
506 description
=> "Set the initial date of the real time clock. Valid format for date are: 'now' or '2006-06-17T16:01:21' or '2006-06-17'.",
507 pattern
=> '(now|\d{4}-\d{1,2}-\d{1,2}(T\d{1,2}:\d{1,2}:\d{1,2})?)',
510 startup
=> get_standard_option
('pve-startup-order'),
514 description
=> "Enable/disable Template.",
520 description
=> "Arbitrary arguments passed to kvm.",
521 verbose_description
=> <<EODESCR,
522 Arbitrary arguments passed to kvm, for example:
524 args: -no-reboot -no-hpet
526 NOTE: this option is for experts only.
533 description
=> "Enable/disable the USB tablet device.",
534 verbose_description
=> "Enable/disable the USB tablet device. This device is " .
535 "usually needed to allow absolute mouse positioning with VNC. " .
536 "Else the mouse runs out of sync with normal VNC clients. " .
537 "If you're running lots of console-only guests on one host, " .
538 "you may consider disabling this to save some context switches. " .
539 "This is turned off by default if you use spice (-vga=qxl).",
544 description
=> "Set maximum speed (in MB/s) for migrations. Value 0 is no limit.",
548 migrate_downtime
=> {
551 description
=> "Set maximum tolerated downtime (in seconds) for migrations.",
557 type
=> 'string', format
=> 'pve-qm-ide',
558 typetext
=> '<volume>',
559 description
=> "This is an alias for option -ide2",
563 description
=> "Emulated CPU type.",
567 parent
=> get_standard_option
('pve-snapshot-name', {
569 description
=> "Parent snapshot name. This is used internally, and should not be modified.",
573 description
=> "Timestamp for snapshots.",
579 type
=> 'string', format
=> 'pve-volume-id',
580 description
=> "Reference to a volume which stores the VM state. This is used internally for snapshots.",
582 vmstatestorage
=> get_standard_option
('pve-storage-id', {
583 description
=> "Default storage for VM state volumes/files.",
586 runningmachine
=> get_standard_option
('pve-qemu-machine', {
587 description
=> "Specifies the Qemu machine type of the running vm. This is used internally for snapshots.",
589 machine
=> get_standard_option
('pve-qemu-machine'),
591 description
=> "Virtual processor architecture. Defaults to the host.",
594 enum
=> [qw(x86_64 aarch64)],
597 description
=> "Specify SMBIOS type 1 fields.",
598 type
=> 'string', format
=> 'pve-qm-smbios1',
605 description
=> "Sets the protection flag of the VM. This will disable the remove VM and remove disk operations.",
611 enum
=> [ qw(seabios ovmf) ],
612 description
=> "Select BIOS implementation.",
613 default => 'seabios',
617 pattern
=> '(?:[a-fA-F0-9]{8}(?:-[a-fA-F0-9]{4}){3}-[a-fA-F0-9]{12}|[01])',
618 format_description
=> 'UUID',
619 description
=> "Set VM Generation ID. Use '1' to autogenerate on create or update, pass '0' to disable explicitly.",
620 verbose_description
=> "The VM generation ID (vmgenid) device exposes a".
621 " 128-bit integer value identifier to the guest OS. This allows to".
622 " notify the guest operating system when the virtual machine is".
623 " executed with a different configuration (e.g. snapshot execution".
624 " or creation from a template). The guest operating system notices".
625 " the change, and is then able to react as appropriate by marking".
626 " its copies of distributed databases as dirty, re-initializing its".
627 " random number generator, etc.\n".
628 "Note that auto-creation only works when done throug API/CLI create".
629 " or update methods, but not when manually editing the config file.",
630 default => "1 (autogenerated)",
635 format
=> 'pve-volume-id',
637 description
=> "Script that will be executed during various steps in the vms lifetime.",
641 format
=> $ivshmem_fmt,
642 description
=> "Inter-VM shared memory. Useful for direct communication between VMs, or to the host.",
651 description
=> 'Specify a custom file containing all meta data passed to the VM via cloud-init. This is provider specific meaning configdrive2 and nocloud differ.',
652 format
=> 'pve-volume-id',
653 format_description
=> 'volume',
658 description
=> 'Specify a custom file containing all network data passed to the VM via cloud-init.',
659 format
=> 'pve-volume-id',
660 format_description
=> 'volume',
665 description
=> 'Specify a custom file containing all user data passed to the VM via cloud-init.',
666 format
=> 'pve-volume-id',
667 format_description
=> 'volume',
670 PVE
::JSONSchema
::register_format
('pve-qm-cicustom', $cicustom_fmt);
672 my $confdesc_cloudinit = {
676 description
=> 'Specifies the cloud-init configuration format. The default depends on the configured operating system type (`ostype`. We use the `nocloud` format for Linux, and `configdrive2` for windows.',
677 enum
=> ['configdrive2', 'nocloud'],
682 description
=> "cloud-init: User name to change ssh keys and password for instead of the image's configured default user.",
687 description
=> 'cloud-init: Password to assign the user. Using this is generally not recommended. Use ssh keys instead. Also note that older cloud-init versions do not support hashed passwords.',
692 description
=> 'cloud-init: Specify custom files to replace the automatically generated ones at start.',
693 format
=> 'pve-qm-cicustom',
698 description
=> "cloud-init: Sets DNS search domains for a container. Create will automatically use the setting from the host if neither searchdomain nor nameserver are set.",
702 type
=> 'string', format
=> 'address-list',
703 description
=> "cloud-init: Sets DNS server IP address for a container. Create will automatically use the setting from the host if neither searchdomain nor nameserver are set.",
708 format
=> 'urlencoded',
709 description
=> "cloud-init: Setup public SSH keys (one key per line, OpenSSH format).",
713 # what about other qemu settings ?
715 #machine => 'string',
728 ##soundhw => 'string',
730 while (my ($k, $v) = each %$confdesc) {
731 PVE
::JSONSchema
::register_standard_option
("pve-qm-$k", $v);
734 my $MAX_IDE_DISKS = 4;
735 my $MAX_SCSI_DISKS = 14;
736 my $MAX_VIRTIO_DISKS = 16;
737 my $MAX_SATA_DISKS = 6;
738 my $MAX_USB_DEVICES = 5;
740 my $MAX_UNUSED_DISKS = 256;
741 my $MAX_HOSTPCI_DEVICES = 4;
742 my $MAX_SERIAL_PORTS = 4;
743 my $MAX_PARALLEL_PORTS = 3;
749 pattern
=> qr/\d+(?:-\d+)?(?:;\d+(?:-\d+)?)*/,
750 description
=> "CPUs accessing this NUMA node.",
751 format_description
=> "id[-id];...",
755 description
=> "Amount of memory this NUMA node provides.",
760 pattern
=> qr/\d+(?:-\d+)?(?:;\d+(?:-\d+)?)*/,
761 description
=> "Host NUMA nodes to use.",
762 format_description
=> "id[-id];...",
767 enum
=> [qw(preferred bind interleave)],
768 description
=> "NUMA allocation policy.",
772 PVE
::JSONSchema
::register_format
('pve-qm-numanode', $numa_fmt);
775 type
=> 'string', format
=> $numa_fmt,
776 description
=> "NUMA topology.",
778 PVE
::JSONSchema
::register_standard_option
("pve-qm-numanode", $numadesc);
780 for (my $i = 0; $i < $MAX_NUMA; $i++) {
781 $confdesc->{"numa$i"} = $numadesc;
784 my $nic_model_list = ['rtl8139', 'ne2k_pci', 'e1000', 'pcnet', 'virtio',
785 'ne2k_isa', 'i82551', 'i82557b', 'i82559er', 'vmxnet3',
786 'e1000-82540em', 'e1000-82544gc', 'e1000-82545em'];
787 my $nic_model_list_txt = join(' ', sort @$nic_model_list);
789 my $net_fmt_bridge_descr = <<__EOD__;
790 Bridge to attach the network device to. The Proxmox VE standard bridge
793 If you do not specify a bridge, we create a kvm user (NATed) network
794 device, which provides DHCP and DNS services. The following addresses
801 The DHCP server assign addresses to the guest starting from 10.0.2.15.
805 macaddr
=> get_standard_option
('mac-addr', {
806 description
=> "MAC address. That address must be unique withing your network. This is automatically generated if not specified.",
810 description
=> "Network Card Model. The 'virtio' model provides the best performance with very low CPU overhead. If your guest does not support this driver, it is usually best to use 'e1000'.",
811 enum
=> $nic_model_list,
814 (map { $_ => { keyAlias
=> 'model', alias
=> 'macaddr' }} @$nic_model_list),
817 description
=> $net_fmt_bridge_descr,
818 format_description
=> 'bridge',
823 minimum
=> 0, maximum
=> 16,
824 description
=> 'Number of packet queues to be used on the device.',
830 description
=> "Rate limit in mbps (megabytes per second) as floating point number.",
835 minimum
=> 1, maximum
=> 4094,
836 description
=> 'VLAN tag to apply to packets on this interface.',
841 pattern
=> qr/\d+(?:-\d+)?(?:;\d+(?:-\d+)?)*/,
842 description
=> 'VLAN trunks to pass through this interface.',
843 format_description
=> 'vlanid[;vlanid...]',
848 description
=> 'Whether this interface should be protected by the firewall.',
853 description
=> 'Whether this interface should be disconnected (like pulling the plug).',
860 type
=> 'string', format
=> $net_fmt,
861 description
=> "Specify network devices.",
864 PVE
::JSONSchema
::register_standard_option
("pve-qm-net", $netdesc);
869 format
=> 'pve-ipv4-config',
870 format_description
=> 'IPv4Format/CIDR',
871 description
=> 'IPv4 address in CIDR format.',
878 format_description
=> 'GatewayIPv4',
879 description
=> 'Default gateway for IPv4 traffic.',
885 format
=> 'pve-ipv6-config',
886 format_description
=> 'IPv6Format/CIDR',
887 description
=> 'IPv6 address in CIDR format.',
894 format_description
=> 'GatewayIPv6',
895 description
=> 'Default gateway for IPv6 traffic.',
900 PVE
::JSONSchema
::register_format
('pve-qm-ipconfig', $ipconfig_fmt);
903 type
=> 'string', format
=> 'pve-qm-ipconfig',
904 description
=> <<'EODESCR',
905 cloud-init: Specify IP addresses and gateways for the corresponding interface.
907 IP addresses use CIDR notation, gateways are optional but need an IP of the same type specified.
909 The special string 'dhcp' can be used for IP addresses to use DHCP, in which case no explicit gateway should be provided.
910 For IPv6 the special string 'auto' can be used to use stateless autoconfiguration.
912 If cloud-init is enabled and neither an IPv4 nor an IPv6 address is specified, it defaults to using dhcp on IPv4.
915 PVE
::JSONSchema
::register_standard_option
("pve-qm-ipconfig", $netdesc);
917 for (my $i = 0; $i < $MAX_NETS; $i++) {
918 $confdesc->{"net$i"} = $netdesc;
919 $confdesc_cloudinit->{"ipconfig$i"} = $ipconfigdesc;
922 foreach my $key (keys %$confdesc_cloudinit) {
923 $confdesc->{$key} = $confdesc_cloudinit->{$key};
926 PVE
::JSONSchema
::register_format
('pve-volume-id-or-qm-path', \
&verify_volume_id_or_qm_path
);
927 sub verify_volume_id_or_qm_path
{
928 my ($volid, $noerr) = @_;
930 if ($volid eq 'none' || $volid eq 'cdrom' || $volid =~ m
|^/|) {
934 # if its neither 'none' nor 'cdrom' nor a path, check if its a volume-id
935 $volid = eval { PVE
::JSONSchema
::check_format
('pve-volume-id', $volid, '') };
937 return undef if $noerr;
945 my %drivedesc_base = (
946 volume
=> { alias
=> 'file' },
949 format
=> 'pve-volume-id-or-qm-path',
951 format_description
=> 'volume',
952 description
=> "The drive's backing volume.",
956 enum
=> [qw(cdrom disk)],
957 description
=> "The drive's media type.",
963 description
=> "Force the drive's physical geometry to have a specific cylinder count.",
968 description
=> "Force the drive's physical geometry to have a specific head count.",
973 description
=> "Force the drive's physical geometry to have a specific sector count.",
978 enum
=> [qw(none lba auto)],
979 description
=> "Force disk geometry bios translation mode.",
984 description
=> "Controls qemu's snapshot mode feature."
985 . " If activated, changes made to the disk are temporary and will"
986 . " be discarded when the VM is shutdown.",
991 enum
=> [qw(none writethrough writeback unsafe directsync)],
992 description
=> "The drive's cache mode",
995 format
=> get_standard_option
('pve-qm-image-format'),
998 format
=> 'disk-size',
999 format_description
=> 'DiskSize',
1000 description
=> "Disk size. This is purely informational and has no effect.",
1005 description
=> "Whether the drive should be included when making backups.",
1010 description
=> 'Whether the drive should considered for replication jobs.',
1016 enum
=> [qw(ignore report stop)],
1017 description
=> 'Read error action.',
1022 enum
=> [qw(enospc ignore report stop)],
1023 description
=> 'Write error action.',
1028 enum
=> [qw(native threads)],
1029 description
=> 'AIO type to use.',
1034 enum
=> [qw(ignore on)],
1035 description
=> 'Controls whether to pass discard/trim requests to the underlying storage.',
1040 description
=> 'Controls whether to detect and try to optimize writes of zeroes.',
1045 format
=> 'urlencoded',
1046 format_description
=> 'serial',
1047 maxLength
=> 20*3, # *3 since it's %xx url enoded
1048 description
=> "The drive's reported serial number, url-encoded, up to 20 bytes long.",
1053 description
=> 'Mark this locally-managed volume as available on all nodes',
1054 verbose_description
=> "Mark this locally-managed volume as available on all nodes.\n\nWARNING: This option does not share the volume automatically, it assumes it is shared already!",
1060 my %iothread_fmt = ( iothread
=> {
1062 description
=> "Whether to use iothreads for this drive",
1069 format
=> 'urlencoded',
1070 format_description
=> 'model',
1071 maxLength
=> 40*3, # *3 since it's %xx url enoded
1072 description
=> "The drive's reported model name, url-encoded, up to 40 bytes long.",
1080 description
=> "Number of queues.",
1086 my %scsiblock_fmt = (
1089 description
=> "whether to use scsi-block for full passthrough of host block device\n\nWARNING: can lead to I/O errors in combination with low memory or high memory fragmentation on host",
1098 description
=> "Whether to expose this drive as an SSD, rather than a rotational hard disk.",
1106 pattern
=> qr/^(0x)[0-9a-fA-F]{16}/,
1107 format_description
=> 'wwn',
1108 description
=> "The drive's worldwide name, encoded as 16 bytes hex string, prefixed by '0x'.",
1113 my $add_throttle_desc = sub {
1114 my ($key, $type, $what, $unit, $longunit, $minimum) = @_;
1117 format_description
=> $unit,
1118 description
=> "Maximum $what in $longunit.",
1121 $d->{minimum
} = $minimum if defined($minimum);
1122 $drivedesc_base{$key} = $d;
1124 # throughput: (leaky bucket)
1125 $add_throttle_desc->('bps', 'integer', 'r/w speed', 'bps', 'bytes per second');
1126 $add_throttle_desc->('bps_rd', 'integer', 'read speed', 'bps', 'bytes per second');
1127 $add_throttle_desc->('bps_wr', 'integer', 'write speed', 'bps', 'bytes per second');
1128 $add_throttle_desc->('mbps', 'number', 'r/w speed', 'mbps', 'megabytes per second');
1129 $add_throttle_desc->('mbps_rd', 'number', 'read speed', 'mbps', 'megabytes per second');
1130 $add_throttle_desc->('mbps_wr', 'number', 'write speed', 'mbps', 'megabytes per second');
1131 $add_throttle_desc->('iops', 'integer', 'r/w I/O', 'iops', 'operations per second');
1132 $add_throttle_desc->('iops_rd', 'integer', 'read I/O', 'iops', 'operations per second');
1133 $add_throttle_desc->('iops_wr', 'integer', 'write I/O', 'iops', 'operations per second');
1135 # pools: (pool of IO before throttling starts taking effect)
1136 $add_throttle_desc->('mbps_max', 'number', 'unthrottled r/w pool', 'mbps', 'megabytes per second');
1137 $add_throttle_desc->('mbps_rd_max', 'number', 'unthrottled read pool', 'mbps', 'megabytes per second');
1138 $add_throttle_desc->('mbps_wr_max', 'number', 'unthrottled write pool', 'mbps', 'megabytes per second');
1139 $add_throttle_desc->('iops_max', 'integer', 'unthrottled r/w I/O pool', 'iops', 'operations per second');
1140 $add_throttle_desc->('iops_rd_max', 'integer', 'unthrottled read I/O pool', 'iops', 'operations per second');
1141 $add_throttle_desc->('iops_wr_max', 'integer', 'unthrottled write I/O pool', 'iops', 'operations per second');
1144 $add_throttle_desc->('bps_max_length', 'integer', 'length of I/O bursts', 'seconds', 'seconds', 1);
1145 $add_throttle_desc->('bps_rd_max_length', 'integer', 'length of read I/O bursts', 'seconds', 'seconds', 1);
1146 $add_throttle_desc->('bps_wr_max_length', 'integer', 'length of write I/O bursts', 'seconds', 'seconds', 1);
1147 $add_throttle_desc->('iops_max_length', 'integer', 'length of I/O bursts', 'seconds', 'seconds', 1);
1148 $add_throttle_desc->('iops_rd_max_length', 'integer', 'length of read I/O bursts', 'seconds', 'seconds', 1);
1149 $add_throttle_desc->('iops_wr_max_length', 'integer', 'length of write I/O bursts', 'seconds', 'seconds', 1);
1152 $drivedesc_base{'bps_rd_length'} = { alias
=> 'bps_rd_max_length' };
1153 $drivedesc_base{'bps_wr_length'} = { alias
=> 'bps_wr_max_length' };
1154 $drivedesc_base{'iops_rd_length'} = { alias
=> 'iops_rd_max_length' };
1155 $drivedesc_base{'iops_wr_length'} = { alias
=> 'iops_wr_max_length' };
1163 PVE
::JSONSchema
::register_format
("pve-qm-ide", $ide_fmt);
1167 type
=> 'string', format
=> $ide_fmt,
1168 description
=> "Use volume as IDE hard disk or CD-ROM (n is 0 to " .($MAX_IDE_DISKS -1) . ").",
1170 PVE
::JSONSchema
::register_standard_option
("pve-qm-ide", $idedesc);
1182 type
=> 'string', format
=> $scsi_fmt,
1183 description
=> "Use volume as SCSI hard disk or CD-ROM (n is 0 to " . ($MAX_SCSI_DISKS - 1) . ").",
1185 PVE
::JSONSchema
::register_standard_option
("pve-qm-scsi", $scsidesc);
1194 type
=> 'string', format
=> $sata_fmt,
1195 description
=> "Use volume as SATA hard disk or CD-ROM (n is 0 to " . ($MAX_SATA_DISKS - 1). ").",
1197 PVE
::JSONSchema
::register_standard_option
("pve-qm-sata", $satadesc);
1205 type
=> 'string', format
=> $virtio_fmt,
1206 description
=> "Use volume as VIRTIO hard disk (n is 0 to " . ($MAX_VIRTIO_DISKS - 1) . ").",
1208 PVE
::JSONSchema
::register_standard_option
("pve-qm-virtio", $virtiodesc);
1210 my $alldrive_fmt = {
1221 volume
=> { alias
=> 'file' },
1224 format
=> 'pve-volume-id-or-qm-path',
1226 format_description
=> 'volume',
1227 description
=> "The drive's backing volume.",
1229 format
=> get_standard_option
('pve-qm-image-format'),
1232 format
=> 'disk-size',
1233 format_description
=> 'DiskSize',
1234 description
=> "Disk size. This is purely informational and has no effect.",
1239 my $efidisk_desc = {
1241 type
=> 'string', format
=> $efidisk_fmt,
1242 description
=> "Configure a Disk for storing EFI vars",
1245 PVE
::JSONSchema
::register_standard_option
("pve-qm-efidisk", $efidisk_desc);
1250 type
=> 'string', format
=> 'pve-qm-usb-device',
1251 format_description
=> 'HOSTUSBDEVICE|spice',
1252 description
=> <<EODESCR,
1253 The Host USB device or port or the value 'spice'. HOSTUSBDEVICE syntax is:
1255 'bus-port(.port)*' (decimal numbers) or
1256 'vendor_id:product_id' (hexadeciaml numbers) or
1259 You can use the 'lsusb -t' command to list existing usb devices.
1261 NOTE: This option allows direct access to host hardware. So it is no longer possible to migrate such machines - use with special care.
1263 The value 'spice' can be used to add a usb redirection devices for spice.
1269 description
=> "Specifies whether if given host option is a USB3 device or port (this does currently not work reliably with spice redirection and is then ignored).",
1276 type
=> 'string', format
=> $usb_fmt,
1277 description
=> "Configure an USB device (n is 0 to 4).",
1279 PVE
::JSONSchema
::register_standard_option
("pve-qm-usb", $usbdesc);
1281 my $PCIRE = qr/[a-f0-9]{2}:[a-f0-9]{2}(?:\.[a-f0-9])?/;
1286 pattern
=> qr/$PCIRE(;$PCIRE)*/,
1287 format_description
=> 'HOSTPCIID[;HOSTPCIID2...]',
1288 description
=> <<EODESCR,
1289 Host PCI device pass through. The PCI ID of a host's PCI device or a list
1290 of PCI virtual functions of the host. HOSTPCIID syntax is:
1292 'bus:dev.func' (hexadecimal numbers)
1294 You can us the 'lspci' command to list existing PCI devices.
1299 description
=> "Specify whether or not the device's ROM will be visible in the guest's memory map.",
1305 pattern
=> '[^,;]+',
1306 format_description
=> 'string',
1307 description
=> "Custom pci device rom filename (must be located in /usr/share/kvm/).",
1312 description
=> "Choose the PCI-express bus (needs the 'q35' machine model).",
1318 description
=> "Enable vfio-vga device support.",
1324 format_description
=> 'string',
1325 pattern
=> '[^/\.:]+',
1327 description
=> <<EODESCR
1328 The type of mediated device to use.
1329 An instance of this type will be created on startup of the VM and
1330 will be cleaned up when the VM stops.
1334 PVE
::JSONSchema
::register_format
('pve-qm-hostpci', $hostpci_fmt);
1338 type
=> 'string', format
=> 'pve-qm-hostpci',
1339 description
=> "Map host PCI devices into guest.",
1340 verbose_description
=> <<EODESCR,
1341 Map host PCI devices into guest.
1343 NOTE: This option allows direct access to host hardware. So it is no longer
1344 possible to migrate such machines - use with special care.
1346 CAUTION: Experimental! User reported problems with this option.
1349 PVE
::JSONSchema
::register_standard_option
("pve-qm-hostpci", $hostpcidesc);
1354 pattern
=> '(/dev/.+|socket)',
1355 description
=> "Create a serial device inside the VM (n is 0 to 3)",
1356 verbose_description
=> <<EODESCR,
1357 Create a serial device inside the VM (n is 0 to 3), and pass through a
1358 host serial device (i.e. /dev/ttyS0), or create a unix socket on the
1359 host side (use 'qm terminal' to open a terminal connection).
1361 NOTE: If you pass through a host serial device, it is no longer possible to migrate such machines - use with special care.
1363 CAUTION: Experimental! User reported problems with this option.
1370 pattern
=> '/dev/parport\d+|/dev/usb/lp\d+',
1371 description
=> "Map host parallel devices (n is 0 to 2).",
1372 verbose_description
=> <<EODESCR,
1373 Map host parallel devices (n is 0 to 2).
1375 NOTE: This option allows direct access to host hardware. So it is no longer possible to migrate such machines - use with special care.
1377 CAUTION: Experimental! User reported problems with this option.
1381 for (my $i = 0; $i < $MAX_PARALLEL_PORTS; $i++) {
1382 $confdesc->{"parallel$i"} = $paralleldesc;
1385 for (my $i = 0; $i < $MAX_SERIAL_PORTS; $i++) {
1386 $confdesc->{"serial$i"} = $serialdesc;
1389 for (my $i = 0; $i < $MAX_HOSTPCI_DEVICES; $i++) {
1390 $confdesc->{"hostpci$i"} = $hostpcidesc;
1393 for (my $i = 0; $i < $MAX_IDE_DISKS; $i++) {
1394 $drivename_hash->{"ide$i"} = 1;
1395 $confdesc->{"ide$i"} = $idedesc;
1398 for (my $i = 0; $i < $MAX_SATA_DISKS; $i++) {
1399 $drivename_hash->{"sata$i"} = 1;
1400 $confdesc->{"sata$i"} = $satadesc;
1403 for (my $i = 0; $i < $MAX_SCSI_DISKS; $i++) {
1404 $drivename_hash->{"scsi$i"} = 1;
1405 $confdesc->{"scsi$i"} = $scsidesc ;
1408 for (my $i = 0; $i < $MAX_VIRTIO_DISKS; $i++) {
1409 $drivename_hash->{"virtio$i"} = 1;
1410 $confdesc->{"virtio$i"} = $virtiodesc;
1413 $drivename_hash->{efidisk0
} = 1;
1414 $confdesc->{efidisk0
} = $efidisk_desc;
1416 for (my $i = 0; $i < $MAX_USB_DEVICES; $i++) {
1417 $confdesc->{"usb$i"} = $usbdesc;
1422 type
=> 'string', format
=> 'pve-volume-id',
1423 description
=> "Reference to unused volumes. This is used internally, and should not be modified manually.",
1426 for (my $i = 0; $i < $MAX_UNUSED_DISKS; $i++) {
1427 $confdesc->{"unused$i"} = $unuseddesc;
1430 my $kvm_api_version = 0;
1433 return $kvm_api_version if $kvm_api_version;
1435 open my $fh, '<', '/dev/kvm'
1438 # 0xae00 => KVM_GET_API_VERSION
1439 $kvm_api_version = ioctl($fh, 0xae00, 0);
1441 return $kvm_api_version;
1444 my $kvm_user_version;
1446 sub kvm_user_version
{
1448 return $kvm_user_version if $kvm_user_version;
1450 $kvm_user_version = 'unknown';
1454 if ($line =~ m/^QEMU( PC)? emulator version (\d+\.\d+(\.\d+)?)(\.\d+)?[,\s]/) {
1455 $kvm_user_version = $2;
1459 eval { run_command
("kvm -version", outfunc
=> $code); };
1462 return $kvm_user_version;
1466 sub kernel_has_vhost_net
{
1467 return -c
'/dev/vhost-net';
1470 sub valid_drive_names
{
1471 # order is important - used to autoselect boot disk
1472 return ((map { "ide$_" } (0 .. ($MAX_IDE_DISKS - 1))),
1473 (map { "scsi$_" } (0 .. ($MAX_SCSI_DISKS - 1))),
1474 (map { "virtio$_" } (0 .. ($MAX_VIRTIO_DISKS - 1))),
1475 (map { "sata$_" } (0 .. ($MAX_SATA_DISKS - 1))),
1479 sub is_valid_drivename
{
1482 return defined($drivename_hash->{$dev});
1487 return defined($confdesc->{$key});
1491 return $nic_model_list;
1494 sub os_list_description
{
1498 wxp
=> 'Windows XP',
1499 w2k
=> 'Windows 2000',
1500 w2k3
=>, 'Windows 2003',
1501 w2k8
=> 'Windows 2008',
1502 wvista
=> 'Windows Vista',
1503 win7
=> 'Windows 7',
1504 win8
=> 'Windows 8/2012',
1505 win10
=> 'Windows 10/2016',
1513 sub get_cdrom_path
{
1515 return $cdrom_path if $cdrom_path;
1517 return $cdrom_path = "/dev/cdrom" if -l
"/dev/cdrom";
1518 return $cdrom_path = "/dev/cdrom1" if -l
"/dev/cdrom1";
1519 return $cdrom_path = "/dev/cdrom2" if -l
"/dev/cdrom2";
1523 my ($storecfg, $vmid, $cdrom) = @_;
1525 if ($cdrom eq 'cdrom') {
1526 return get_cdrom_path
();
1527 } elsif ($cdrom eq 'none') {
1529 } elsif ($cdrom =~ m
|^/|) {
1532 return PVE
::Storage
::path
($storecfg, $cdrom);
1536 # try to convert old style file names to volume IDs
1537 sub filename_to_volume_id
{
1538 my ($vmid, $file, $media) = @_;
1540 if (!($file eq 'none' || $file eq 'cdrom' ||
1541 $file =~ m
|^/dev/.+| || $file =~ m/^([^:]+):(.+)$/)) {
1543 return undef if $file =~ m
|/|;
1545 if ($media && $media eq 'cdrom') {
1546 $file = "local:iso/$file";
1548 $file = "local:$vmid/$file";
1555 sub verify_media_type
{
1556 my ($opt, $vtype, $media) = @_;
1561 if ($media eq 'disk') {
1563 } elsif ($media eq 'cdrom') {
1566 die "internal error";
1569 return if ($vtype eq $etype);
1571 raise_param_exc
({ $opt => "unexpected media type ($vtype != $etype)" });
1574 sub cleanup_drive_path
{
1575 my ($opt, $storecfg, $drive) = @_;
1577 # try to convert filesystem paths to volume IDs
1579 if (($drive->{file
} !~ m/^(cdrom|none)$/) &&
1580 ($drive->{file
} !~ m
|^/dev/.+|) &&
1581 ($drive->{file
} !~ m/^([^:]+):(.+)$/) &&
1582 ($drive->{file
} !~ m/^\d+$/)) {
1583 my ($vtype, $volid) = PVE
::Storage
::path_to_volume_id
($storecfg, $drive->{file
});
1584 raise_param_exc
({ $opt => "unable to associate path '$drive->{file}' to any storage"}) if !$vtype;
1585 $drive->{media
} = 'cdrom' if !$drive->{media
} && $vtype eq 'iso';
1586 verify_media_type
($opt, $vtype, $drive->{media
});
1587 $drive->{file
} = $volid;
1590 $drive->{media
} = 'cdrom' if !$drive->{media
} && $drive->{file
} =~ m/^(cdrom|none)$/;
1593 sub parse_hotplug_features
{
1598 return $res if $data eq '0';
1600 $data = $confdesc->{hotplug
}->{default} if $data eq '1';
1602 foreach my $feature (PVE
::Tools
::split_list
($data)) {
1603 if ($feature =~ m/^(network|disk|cpu|memory|usb)$/) {
1606 die "invalid hotplug feature '$feature'\n";
1612 PVE
::JSONSchema
::register_format
('pve-hotplug-features', \
&pve_verify_hotplug_features
);
1613 sub pve_verify_hotplug_features
{
1614 my ($value, $noerr) = @_;
1616 return $value if parse_hotplug_features
($value);
1618 return undef if $noerr;
1620 die "unable to parse hotplug option\n";
1623 # ideX = [volume=]volume-id[,media=d][,cyls=c,heads=h,secs=s[,trans=t]]
1624 # [,snapshot=on|off][,cache=on|off][,format=f][,backup=yes|no]
1625 # [,rerror=ignore|report|stop][,werror=enospc|ignore|report|stop]
1626 # [,aio=native|threads][,discard=ignore|on][,detect_zeroes=on|off]
1627 # [,iothread=on][,serial=serial][,model=model]
1630 my ($key, $data) = @_;
1632 my ($interface, $index);
1634 if ($key =~ m/^([^\d]+)(\d+)$/) {
1641 my $desc = $key =~ /^unused\d+$/ ?
$alldrive_fmt
1642 : $confdesc->{$key}->{format
};
1644 warn "invalid drive key: $key\n";
1647 my $res = eval { PVE
::JSONSchema
::parse_property_string
($desc, $data) };
1648 return undef if !$res;
1649 $res->{interface
} = $interface;
1650 $res->{index} = $index;
1653 foreach my $opt (qw(bps bps_rd bps_wr)) {
1654 if (my $bps = defined(delete $res->{$opt})) {
1655 if (defined($res->{"m$opt"})) {
1656 warn "both $opt and m$opt specified\n";
1660 $res->{"m$opt"} = sprintf("%.3f", $bps / (1024*1024.0));
1664 # can't use the schema's 'requires' because of the mbps* => bps* "transforming aliases"
1665 for my $requirement (
1666 [mbps_max
=> 'mbps'],
1667 [mbps_rd_max
=> 'mbps_rd'],
1668 [mbps_wr_max
=> 'mbps_wr'],
1669 [miops_max
=> 'miops'],
1670 [miops_rd_max
=> 'miops_rd'],
1671 [miops_wr_max
=> 'miops_wr'],
1672 [bps_max_length
=> 'mbps_max'],
1673 [bps_rd_max_length
=> 'mbps_rd_max'],
1674 [bps_wr_max_length
=> 'mbps_wr_max'],
1675 [iops_max_length
=> 'iops_max'],
1676 [iops_rd_max_length
=> 'iops_rd_max'],
1677 [iops_wr_max_length
=> 'iops_wr_max']) {
1678 my ($option, $requires) = @$requirement;
1679 if ($res->{$option} && !$res->{$requires}) {
1680 warn "$option requires $requires\n";
1685 return undef if $error;
1687 return undef if $res->{mbps_rd
} && $res->{mbps
};
1688 return undef if $res->{mbps_wr
} && $res->{mbps
};
1689 return undef if $res->{iops_rd
} && $res->{iops
};
1690 return undef if $res->{iops_wr
} && $res->{iops
};
1692 if ($res->{media
} && ($res->{media
} eq 'cdrom')) {
1693 return undef if $res->{snapshot
} || $res->{trans
} || $res->{format
};
1694 return undef if $res->{heads
} || $res->{secs
} || $res->{cyls
};
1695 return undef if $res->{interface
} eq 'virtio';
1698 if (my $size = $res->{size
}) {
1699 return undef if !defined($res->{size
} = PVE
::JSONSchema
::parse_size
($size));
1706 my ($vmid, $drive) = @_;
1707 my $data = { %$drive };
1708 delete $data->{$_} for qw(index interface);
1709 return PVE
::JSONSchema
::print_property_string
($data, $alldrive_fmt);
1713 my($fh, $noerr) = @_;
1716 my $SG_GET_VERSION_NUM = 0x2282;
1718 my $versionbuf = "\x00" x
8;
1719 my $ret = ioctl($fh, $SG_GET_VERSION_NUM, $versionbuf);
1721 die "scsi ioctl SG_GET_VERSION_NUM failoed - $!\n" if !$noerr;
1724 my $version = unpack("I", $versionbuf);
1725 if ($version < 30000) {
1726 die "scsi generic interface too old\n" if !$noerr;
1730 my $buf = "\x00" x
36;
1731 my $sensebuf = "\x00" x
8;
1732 my $cmd = pack("C x3 C x1", 0x12, 36);
1734 # see /usr/include/scsi/sg.h
1735 my $sg_io_hdr_t = "i i C C s I P P P I I i P C C C C S S i I I";
1737 my $packet = pack($sg_io_hdr_t, ord('S'), -3, length($cmd),
1738 length($sensebuf), 0, length($buf), $buf,
1739 $cmd, $sensebuf, 6000);
1741 $ret = ioctl($fh, $SG_IO, $packet);
1743 die "scsi ioctl SG_IO failed - $!\n" if !$noerr;
1747 my @res = unpack($sg_io_hdr_t, $packet);
1748 if ($res[17] || $res[18]) {
1749 die "scsi ioctl SG_IO status error - $!\n" if !$noerr;
1754 (my $byte0, my $byte1, $res->{vendor
},
1755 $res->{product
}, $res->{revision
}) = unpack("C C x6 A8 A16 A4", $buf);
1757 $res->{removable
} = $byte1 & 128 ?
1 : 0;
1758 $res->{type
} = $byte0 & 31;
1766 my $fh = IO
::File-
>new("+<$path") || return undef;
1767 my $res = scsi_inquiry
($fh, 1);
1773 sub machine_type_is_q35
{
1776 return $conf->{machine
} && ($conf->{machine
} =~ m/q35/) ?
1 : 0;
1779 sub print_tabletdevice_full
{
1780 my ($conf, $arch) = @_;
1782 my $q35 = machine_type_is_q35
($conf);
1784 # we use uhci for old VMs because tablet driver was buggy in older qemu
1786 if (machine_type_is_q35
($conf) || $arch eq 'aarch64') {
1792 return "usb-tablet,id=tablet,bus=$usbbus.0,port=1";
1795 sub print_keyboarddevice_full
{
1796 my ($conf, $arch, $machine) = @_;
1798 return undef if $arch ne 'aarch64';
1800 return "usb-kbd,id=keyboard,bus=ehci.0,port=2";
1803 sub print_drivedevice_full
{
1804 my ($storecfg, $conf, $vmid, $drive, $bridges, $arch, $machine_type) = @_;
1809 if ($drive->{interface
} eq 'virtio') {
1810 my $pciaddr = print_pci_addr
("$drive->{interface}$drive->{index}", $bridges, $arch, $machine_type);
1811 $device = "virtio-blk-pci,drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}$pciaddr";
1812 $device .= ",iothread=iothread-$drive->{interface}$drive->{index}" if $drive->{iothread
};
1813 } elsif ($drive->{interface
} eq 'scsi') {
1815 my ($maxdev, $controller, $controller_prefix) = scsihw_infos
($conf, $drive);
1816 my $unit = $drive->{index} % $maxdev;
1817 my $devicetype = 'hd';
1819 if (drive_is_cdrom
($drive)) {
1822 if ($drive->{file
} =~ m
|^/|) {
1823 $path = $drive->{file
};
1824 if (my $info = path_is_scsi
($path)) {
1825 if ($info->{type
} == 0 && $drive->{scsiblock
}) {
1826 $devicetype = 'block';
1827 } elsif ($info->{type
} == 1) { # tape
1828 $devicetype = 'generic';
1832 $path = PVE
::Storage
::path
($storecfg, $drive->{file
});
1835 if($path =~ m/^iscsi\:\/\
//){
1836 $devicetype = 'generic';
1840 if (!$conf->{scsihw
} || ($conf->{scsihw
} =~ m/^lsi/)){
1841 $device = "scsi-$devicetype,bus=$controller_prefix$controller.0,scsi-id=$unit,drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}";
1843 $device = "scsi-$devicetype,bus=$controller_prefix$controller.0,channel=0,scsi-id=0,lun=$drive->{index},drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}";
1846 if ($drive->{ssd
} && ($devicetype eq 'block' || $devicetype eq 'hd')) {
1847 $device .= ",rotation_rate=1";
1849 $device .= ",wwn=$drive->{wwn}" if $drive->{wwn
};
1851 } elsif ($drive->{interface
} eq 'ide' || $drive->{interface
} eq 'sata') {
1852 my $maxdev = ($drive->{interface
} eq 'sata') ?
$MAX_SATA_DISKS : 2;
1853 my $controller = int($drive->{index} / $maxdev);
1854 my $unit = $drive->{index} % $maxdev;
1855 my $devicetype = ($drive->{media
} && $drive->{media
} eq 'cdrom') ?
"cd" : "hd";
1857 $device = "ide-$devicetype";
1858 if ($drive->{interface
} eq 'ide') {
1859 $device .= ",bus=ide.$controller,unit=$unit";
1861 $device .= ",bus=ahci$controller.$unit";
1863 $device .= ",drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}";
1865 if ($devicetype eq 'hd') {
1866 if (my $model = $drive->{model
}) {
1867 $model = URI
::Escape
::uri_unescape
($model);
1868 $device .= ",model=$model";
1870 if ($drive->{ssd
}) {
1871 $device .= ",rotation_rate=1";
1874 $device .= ",wwn=$drive->{wwn}" if $drive->{wwn
};
1875 } elsif ($drive->{interface
} eq 'usb') {
1877 # -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0
1879 die "unsupported interface type";
1882 $device .= ",bootindex=$drive->{bootindex}" if $drive->{bootindex
};
1884 if (my $serial = $drive->{serial
}) {
1885 $serial = URI
::Escape
::uri_unescape
($serial);
1886 $device .= ",serial=$serial";
1893 sub get_initiator_name
{
1896 my $fh = IO
::File-
>new('/etc/iscsi/initiatorname.iscsi') || return undef;
1897 while (defined(my $line = <$fh>)) {
1898 next if $line !~ m/^\s*InitiatorName\s*=\s*([\.\-:\w]+)/;
1907 sub print_drive_full
{
1908 my ($storecfg, $vmid, $drive) = @_;
1911 my $volid = $drive->{file
};
1914 if (drive_is_cdrom
($drive)) {
1915 $path = get_iso_path
($storecfg, $vmid, $volid);
1917 my ($storeid, $volname) = PVE
::Storage
::parse_volume_id
($volid, 1);
1919 $path = PVE
::Storage
::path
($storecfg, $volid);
1920 my $scfg = PVE
::Storage
::storage_config
($storecfg, $storeid);
1921 $format = qemu_img_format
($scfg, $volname);
1929 my @qemu_drive_options = qw(heads secs cyls trans media format cache rerror werror aio discard);
1930 foreach my $o (@qemu_drive_options) {
1931 $opts .= ",$o=$drive->{$o}" if defined($drive->{$o});
1934 # snapshot only accepts on|off
1935 if (defined($drive->{snapshot
})) {
1936 my $v = $drive->{snapshot
} ?
'on' : 'off';
1937 $opts .= ",snapshot=$v";
1940 foreach my $type (['', '-total'], [_rd
=> '-read'], [_wr
=> '-write']) {
1941 my ($dir, $qmpname) = @$type;
1942 if (my $v = $drive->{"mbps$dir"}) {
1943 $opts .= ",throttling.bps$qmpname=".int($v*1024*1024);
1945 if (my $v = $drive->{"mbps${dir}_max"}) {
1946 $opts .= ",throttling.bps$qmpname-max=".int($v*1024*1024);
1948 if (my $v = $drive->{"bps${dir}_max_length"}) {
1949 $opts .= ",throttling.bps$qmpname-max-length=$v";
1951 if (my $v = $drive->{"iops${dir}"}) {
1952 $opts .= ",throttling.iops$qmpname=$v";
1954 if (my $v = $drive->{"iops${dir}_max"}) {
1955 $opts .= ",throttling.iops$qmpname-max=$v";
1957 if (my $v = $drive->{"iops${dir}_max_length"}) {
1958 $opts .= ",throttling.iops$qmpname-max-length=$v";
1962 $opts .= ",format=$format" if $format && !$drive->{format
};
1964 my $cache_direct = 0;
1966 if (my $cache = $drive->{cache
}) {
1967 $cache_direct = $cache =~ /^(?:off|none|directsync)$/;
1968 } elsif (!drive_is_cdrom
($drive)) {
1969 $opts .= ",cache=none";
1973 # aio native works only with O_DIRECT
1974 if (!$drive->{aio
}) {
1976 $opts .= ",aio=native";
1978 $opts .= ",aio=threads";
1982 if (!drive_is_cdrom
($drive)) {
1984 if (defined($drive->{detect_zeroes
}) && !$drive->{detect_zeroes
}) {
1985 $detectzeroes = 'off';
1986 } elsif ($drive->{discard
}) {
1987 $detectzeroes = $drive->{discard
} eq 'on' ?
'unmap' : 'on';
1989 # This used to be our default with discard not being specified:
1990 $detectzeroes = 'on';
1992 $opts .= ",detect-zeroes=$detectzeroes" if $detectzeroes;
1995 my $pathinfo = $path ?
"file=$path," : '';
1997 return "${pathinfo}if=none,id=drive-$drive->{interface}$drive->{index}$opts";
2000 sub print_netdevice_full
{
2001 my ($vmid, $conf, $net, $netid, $bridges, $use_old_bios_files, $arch, $machine_type) = @_;
2003 my $bootorder = $conf->{boot
} || $confdesc->{boot
}->{default};
2005 my $device = $net->{model
};
2006 if ($net->{model
} eq 'virtio') {
2007 $device = 'virtio-net-pci';
2010 my $pciaddr = print_pci_addr
("$netid", $bridges, $arch, $machine_type);
2011 my $tmpstr = "$device,mac=$net->{macaddr},netdev=$netid$pciaddr,id=$netid";
2012 if ($net->{queues
} && $net->{queues
} > 1 && $net->{model
} eq 'virtio'){
2013 #Consider we have N queues, the number of vectors needed is 2*N + 2 (plus one config interrupt and control vq)
2014 my $vectors = $net->{queues
} * 2 + 2;
2015 $tmpstr .= ",vectors=$vectors,mq=on";
2017 $tmpstr .= ",bootindex=$net->{bootindex}" if $net->{bootindex
} ;
2019 if ($use_old_bios_files) {
2021 if ($device eq 'virtio-net-pci') {
2022 $romfile = 'pxe-virtio.rom';
2023 } elsif ($device eq 'e1000') {
2024 $romfile = 'pxe-e1000.rom';
2025 } elsif ($device eq 'ne2k') {
2026 $romfile = 'pxe-ne2k_pci.rom';
2027 } elsif ($device eq 'pcnet') {
2028 $romfile = 'pxe-pcnet.rom';
2029 } elsif ($device eq 'rtl8139') {
2030 $romfile = 'pxe-rtl8139.rom';
2032 $tmpstr .= ",romfile=$romfile" if $romfile;
2038 sub print_netdev_full
{
2039 my ($vmid, $conf, $arch, $net, $netid, $hotplug) = @_;
2042 if ($netid =~ m/^net(\d+)$/) {
2046 die "got strange net id '$i'\n" if $i >= ${MAX_NETS
};
2048 my $ifname = "tap${vmid}i$i";
2050 # kvm uses TUNSETIFF ioctl, and that limits ifname length
2051 die "interface name '$ifname' is too long (max 15 character)\n"
2052 if length($ifname) >= 16;
2054 my $vhostparam = '';
2055 if (is_native
($arch)) {
2056 $vhostparam = ',vhost=on' if kernel_has_vhost_net
() && $net->{model
} eq 'virtio';
2059 my $vmname = $conf->{name
} || "vm$vmid";
2062 my $script = $hotplug ?
"pve-bridge-hotplug" : "pve-bridge";
2064 if ($net->{bridge
}) {
2065 $netdev = "type=tap,id=$netid,ifname=${ifname},script=/var/lib/qemu-server/$script,downscript=/var/lib/qemu-server/pve-bridgedown$vhostparam";
2067 $netdev = "type=user,id=$netid,hostname=$vmname";
2070 $netdev .= ",queues=$net->{queues}" if ($net->{queues
} && $net->{model
} eq 'virtio');
2076 sub print_cpu_device
{
2077 my ($conf, $id) = @_;
2079 my $kvm = $conf->{kvm
} // 1;
2080 my $cpu = $kvm ?
"kvm64" : "qemu64";
2081 if (my $cputype = $conf->{cpu
}) {
2082 my $cpuconf = PVE
::JSONSchema
::parse_property_string
($cpu_fmt, $cputype)
2083 or die "Cannot parse cpu description: $cputype\n";
2084 $cpu = $cpuconf->{cputype
};
2087 my $cores = $conf->{cores
} || 1;
2089 my $current_core = ($id - 1) % $cores;
2090 my $current_socket = int(($id - 1 - $current_core)/$cores);
2092 return "$cpu-x86_64-cpu,id=cpu$id,socket-id=$current_socket,core-id=$current_core,thread-id=0";
2096 'cirrus' => 'cirrus-vga',
2098 'vmware' => 'vmware-svga',
2099 'virtio' => 'virtio-vga',
2102 sub print_vga_device
{
2103 my ($conf, $vga, $arch, $machine, $id, $qxlnum, $bridges) = @_;
2105 my $type = $vga_map->{$vga->{type
}};
2106 if ($arch eq 'aarch64' && defined($type) && $type eq 'virtio-vga') {
2107 $type = 'virtio-gpu';
2109 my $vgamem_mb = $vga->{memory
};
2111 $type = $id ?
'qxl' : 'qxl-vga';
2113 die "no devicetype for $vga->{type}\n" if !$type;
2117 if ($vga->{type
} eq 'virtio') {
2118 my $bytes = PVE
::Tools
::convert_size
($vgamem_mb, "mb" => "b");
2119 $memory = ",max_hostmem=$bytes";
2121 # from https://www.spice-space.org/multiple-monitors.html
2122 $memory = ",vgamem_mb=$vga->{memory}";
2123 my $ram = $vgamem_mb * 4;
2124 my $vram = $vgamem_mb * 2;
2125 $memory .= ",ram_size_mb=$ram,vram_size_mb=$vram";
2127 $memory = ",vgamem_mb=$vga->{memory}";
2129 } elsif ($qxlnum && $id) {
2130 $memory = ",ram_size=67108864,vram_size=33554432";
2133 my $q35 = machine_type_is_q35
($conf);
2134 my $vgaid = "vga" . ($id // '');
2137 if ($q35 && $vgaid eq 'vga') {
2138 # the first display uses pcie.0 bus on q35 machines
2139 $pciaddr = print_pcie_addr
($vgaid, $bridges, $arch, $machine);
2141 $pciaddr = print_pci_addr
($vgaid, $bridges, $arch, $machine);
2144 return "$type,id=${vgaid}${memory}${pciaddr}";
2147 sub drive_is_cloudinit
{
2149 return $drive->{file
} =~ m
@[:/]vm-\d
+-cloudinit
(?
:\
.$QEMU_FORMAT_RE)?
$@;
2152 sub drive_is_cdrom
{
2153 my ($drive, $exclude_cloudinit) = @_;
2155 return 0 if $exclude_cloudinit && drive_is_cloudinit
($drive);
2157 return $drive && $drive->{media
} && ($drive->{media
} eq 'cdrom');
2161 sub parse_number_sets
{
2164 foreach my $part (split(/;/, $set)) {
2165 if ($part =~ /^\s*(\d+)(?:-(\d+))?\s*$/) {
2166 die "invalid range: $part ($2 < $1)\n" if defined($2) && $2 < $1;
2167 push @$res, [ $1, $2 ];
2169 die "invalid range: $part\n";
2178 my $res = PVE
::JSONSchema
::parse_property_string
($numa_fmt, $data);
2179 $res->{cpus
} = parse_number_sets
($res->{cpus
}) if defined($res->{cpus
});
2180 $res->{hostnodes
} = parse_number_sets
($res->{hostnodes
}) if defined($res->{hostnodes
});
2187 return undef if !$value;
2189 my $res = PVE
::JSONSchema
::parse_property_string
($hostpci_fmt, $value);
2191 my @idlist = split(/;/, $res->{host
});
2192 delete $res->{host
};
2193 foreach my $id (@idlist) {
2194 if ($id =~ m/\./) { # full id 00:00.1
2195 push @{$res->{pciid
}}, {
2198 } else { # partial id 00:00
2199 $res->{pciid
} = PVE
::SysFSTools
::lspci
($id);
2205 # netX: e1000=XX:XX:XX:XX:XX:XX,bridge=vmbr0,rate=<mbps>
2209 my $res = eval { PVE
::JSONSchema
::parse_property_string
($net_fmt, $data) };
2214 if (!defined($res->{macaddr
})) {
2215 my $dc = PVE
::Cluster
::cfs_read_file
('datacenter.cfg');
2216 $res->{macaddr
} = PVE
::Tools
::random_ether_addr
($dc->{mac_prefix
});
2221 # ipconfigX ip=cidr,gw=ip,ip6=cidr,gw6=ip
2222 sub parse_ipconfig
{
2225 my $res = eval { PVE
::JSONSchema
::parse_property_string
($ipconfig_fmt, $data) };
2231 if ($res->{gw
} && !$res->{ip
}) {
2232 warn 'gateway specified without specifying an IP address';
2235 if ($res->{gw6
} && !$res->{ip6
}) {
2236 warn 'IPv6 gateway specified without specifying an IPv6 address';
2239 if ($res->{gw
} && $res->{ip
} eq 'dhcp') {
2240 warn 'gateway specified together with DHCP';
2243 if ($res->{gw6
} && $res->{ip6
} !~ /^$IPV6RE/) {
2245 warn "IPv6 gateway specified together with $res->{ip6} address";
2249 if (!$res->{ip
} && !$res->{ip6
}) {
2250 return { ip
=> 'dhcp', ip6
=> 'dhcp' };
2259 return PVE
::JSONSchema
::print_property_string
($net, $net_fmt);
2262 sub add_random_macs
{
2263 my ($settings) = @_;
2265 foreach my $opt (keys %$settings) {
2266 next if $opt !~ m/^net(\d+)$/;
2267 my $net = parse_net
($settings->{$opt});
2269 $settings->{$opt} = print_net
($net);
2273 sub vm_is_volid_owner
{
2274 my ($storecfg, $vmid, $volid) = @_;
2276 if ($volid !~ m
|^/|) {
2278 eval { ($path, $owner) = PVE
::Storage
::path
($storecfg, $volid); };
2279 if ($owner && ($owner == $vmid)) {
2287 sub split_flagged_list
{
2288 my $text = shift || '';
2289 $text =~ s/[,;]/ /g;
2291 return { map { /^(!?)(.*)$/ && ($2, $1) } ($text =~ /\S+/g) };
2294 sub join_flagged_list
{
2295 my ($how, $lst) = @_;
2296 join $how, map { $lst->{$_} . $_ } keys %$lst;
2299 sub vmconfig_delete_pending_option
{
2300 my ($conf, $key, $force) = @_;
2302 delete $conf->{pending
}->{$key};
2303 my $pending_delete_hash = split_flagged_list
($conf->{pending
}->{delete});
2304 $pending_delete_hash->{$key} = $force ?
'!' : '';
2305 $conf->{pending
}->{delete} = join_flagged_list
(',', $pending_delete_hash);
2308 sub vmconfig_undelete_pending_option
{
2309 my ($conf, $key) = @_;
2311 my $pending_delete_hash = split_flagged_list
($conf->{pending
}->{delete});
2312 delete $pending_delete_hash->{$key};
2314 if (%$pending_delete_hash) {
2315 $conf->{pending
}->{delete} = join_flagged_list
(',', $pending_delete_hash);
2317 delete $conf->{pending
}->{delete};
2321 sub vmconfig_register_unused_drive
{
2322 my ($storecfg, $vmid, $conf, $drive) = @_;
2324 if (drive_is_cloudinit
($drive)) {
2325 eval { PVE
::Storage
::vdisk_free
($storecfg, $drive->{file
}) };
2327 } elsif (!drive_is_cdrom
($drive)) {
2328 my $volid = $drive->{file
};
2329 if (vm_is_volid_owner
($storecfg, $vmid, $volid)) {
2330 PVE
::QemuConfig-
>add_unused_volume($conf, $volid, $vmid);
2335 sub vmconfig_cleanup_pending
{
2338 # remove pending changes when nothing changed
2340 foreach my $opt (keys %{$conf->{pending
}}) {
2341 if (defined($conf->{$opt}) && ($conf->{pending
}->{$opt} eq $conf->{$opt})) {
2343 delete $conf->{pending
}->{$opt};
2347 my $current_delete_hash = split_flagged_list
($conf->{pending
}->{delete});
2348 my $pending_delete_hash = {};
2349 while (my ($opt, $force) = each %$current_delete_hash) {
2350 if (defined($conf->{$opt})) {
2351 $pending_delete_hash->{$opt} = $force;
2357 if (%$pending_delete_hash) {
2358 $conf->{pending
}->{delete} = join_flagged_list
(',', $pending_delete_hash);
2360 delete $conf->{pending
}->{delete};
2366 # smbios: [manufacturer=str][,product=str][,version=str][,serial=str][,uuid=uuid][,sku=str][,family=str]
2370 pattern
=> '[a-fA-F0-9]{8}(?:-[a-fA-F0-9]{4}){3}-[a-fA-F0-9]{12}',
2371 format_description
=> 'UUID',
2372 description
=> "Set SMBIOS1 UUID.",
2378 format_description
=> 'string',
2379 description
=> "Set SMBIOS1 version.",
2385 format_description
=> 'string',
2386 description
=> "Set SMBIOS1 serial number.",
2392 format_description
=> 'string',
2393 description
=> "Set SMBIOS1 manufacturer.",
2399 format_description
=> 'string',
2400 description
=> "Set SMBIOS1 product ID.",
2406 format_description
=> 'string',
2407 description
=> "Set SMBIOS1 SKU string.",
2413 format_description
=> 'string',
2414 description
=> "Set SMBIOS1 family string.",
2422 my $res = eval { PVE
::JSONSchema
::parse_property_string
($smbios1_fmt, $data) };
2429 return PVE
::JSONSchema
::print_property_string
($smbios1, $smbios1_fmt);
2432 PVE
::JSONSchema
::register_format
('pve-qm-smbios1', $smbios1_fmt);
2434 PVE
::JSONSchema
::register_format
('pve-qm-bootdisk', \
&verify_bootdisk
);
2435 sub verify_bootdisk
{
2436 my ($value, $noerr) = @_;
2438 return $value if is_valid_drivename
($value);
2440 return undef if $noerr;
2442 die "invalid boot disk '$value'\n";
2445 sub parse_watchdog
{
2448 return undef if !$value;
2450 my $res = eval { PVE
::JSONSchema
::parse_property_string
($watchdog_fmt, $value) };
2455 sub parse_guest_agent
{
2458 return {} if !defined($value->{agent
});
2460 my $res = eval { PVE
::JSONSchema
::parse_property_string
($agent_fmt, $value->{agent
}) };
2463 # if the agent is disabled ignore the other potentially set properties
2464 return {} if !$res->{enabled
};
2471 return {} if !$value;
2472 my $res = eval { PVE
::JSONSchema
::parse_property_string
($vga_fmt, $value) };
2477 PVE
::JSONSchema
::register_format
('pve-qm-usb-device', \
&verify_usb_device
);
2478 sub verify_usb_device
{
2479 my ($value, $noerr) = @_;
2481 return $value if parse_usb_device
($value);
2483 return undef if $noerr;
2485 die "unable to parse usb device\n";
2488 # add JSON properties for create and set function
2489 sub json_config_properties
{
2492 foreach my $opt (keys %$confdesc) {
2493 next if $opt eq 'parent' || $opt eq 'snaptime' || $opt eq 'vmstate' || $opt eq 'runningmachine';
2494 $prop->{$opt} = $confdesc->{$opt};
2500 # return copy of $confdesc_cloudinit to generate documentation
2501 sub cloudinit_config_properties
{
2503 return dclone
($confdesc_cloudinit);
2507 my ($key, $value) = @_;
2509 die "unknown setting '$key'\n" if !$confdesc->{$key};
2511 my $type = $confdesc->{$key}->{type
};
2513 if (!defined($value)) {
2514 die "got undefined value\n";
2517 if ($value =~ m/[\n\r]/) {
2518 die "property contains a line feed\n";
2521 if ($type eq 'boolean') {
2522 return 1 if ($value eq '1') || ($value =~ m/^(on|yes|true)$/i);
2523 return 0 if ($value eq '0') || ($value =~ m/^(off|no|false)$/i);
2524 die "type check ('boolean') failed - got '$value'\n";
2525 } elsif ($type eq 'integer') {
2526 return int($1) if $value =~ m/^(\d+)$/;
2527 die "type check ('integer') failed - got '$value'\n";
2528 } elsif ($type eq 'number') {
2529 return $value if $value =~ m/^(\d+)(\.\d+)?$/;
2530 die "type check ('number') failed - got '$value'\n";
2531 } elsif ($type eq 'string') {
2532 if (my $fmt = $confdesc->{$key}->{format
}) {
2533 PVE
::JSONSchema
::check_format
($fmt, $value);
2536 $value =~ s/^\"(.*)\"$/$1/;
2539 die "internal error"
2546 my $conf = PVE
::QemuConfig-
>config_file($vmid);
2547 utime undef, undef, $conf;
2551 my ($storecfg, $vmid, $keep_empty_config, $skiplock) = @_;
2553 my $conffile = PVE
::QemuConfig-
>config_file($vmid);
2555 my $conf = PVE
::QemuConfig-
>load_config($vmid);
2557 PVE
::QemuConfig-
>check_lock($conf) if !$skiplock;
2559 if ($conf->{template
}) {
2560 # check if any base image is still used by a linked clone
2561 foreach_drive
($conf, sub {
2562 my ($ds, $drive) = @_;
2564 return if drive_is_cdrom
($drive);
2566 my $volid = $drive->{file
};
2568 return if !$volid || $volid =~ m
|^/|;
2570 die "base volume '$volid' is still in use by linked cloned\n"
2571 if PVE
::Storage
::volume_is_base_and_used
($storecfg, $volid);
2576 # only remove disks owned by this VM
2577 foreach_drive
($conf, sub {
2578 my ($ds, $drive) = @_;
2580 return if drive_is_cdrom
($drive, 1);
2582 my $volid = $drive->{file
};
2584 return if !$volid || $volid =~ m
|^/|;
2586 my ($path, $owner) = PVE
::Storage
::path
($storecfg, $volid);
2587 return if !$path || !$owner || ($owner != $vmid);
2590 PVE
::Storage
::vdisk_free
($storecfg, $volid);
2592 warn "Could not remove disk '$volid', check manually: $@" if $@;
2596 if ($keep_empty_config) {
2597 PVE
::Tools
::file_set_contents
($conffile, "memory: 128\n");
2602 # also remove unused disk
2604 my $dl = PVE
::Storage
::vdisk_list
($storecfg, undef, $vmid);
2607 PVE
::Storage
::foreach_volid
($dl, sub {
2608 my ($volid, $sid, $volname, $d) = @_;
2609 PVE
::Storage
::vdisk_free
($storecfg, $volid);
2618 sub parse_vm_config
{
2619 my ($filename, $raw) = @_;
2621 return undef if !defined($raw);
2624 digest
=> Digest
::SHA
::sha1_hex
($raw),
2629 $filename =~ m
|/qemu-server/(\d
+)\
.conf
$|
2630 || die "got strange filename '$filename'";
2638 my @lines = split(/\n/, $raw);
2639 foreach my $line (@lines) {
2640 next if $line =~ m/^\s*$/;
2642 if ($line =~ m/^\[PENDING\]\s*$/i) {
2643 $section = 'pending';
2644 if (defined($descr)) {
2646 $conf->{description
} = $descr;
2649 $conf = $res->{$section} = {};
2652 } elsif ($line =~ m/^\[([a-z][a-z0-9_\-]+)\]\s*$/i) {
2654 if (defined($descr)) {
2656 $conf->{description
} = $descr;
2659 $conf = $res->{snapshots
}->{$section} = {};
2663 if ($line =~ m/^\#(.*)\s*$/) {
2664 $descr = '' if !defined($descr);
2665 $descr .= PVE
::Tools
::decode_text
($1) . "\n";
2669 if ($line =~ m/^(description):\s*(.*\S)\s*$/) {
2670 $descr = '' if !defined($descr);
2671 $descr .= PVE
::Tools
::decode_text
($2);
2672 } elsif ($line =~ m/snapstate:\s*(prepare|delete)\s*$/) {
2673 $conf->{snapstate
} = $1;
2674 } elsif ($line =~ m/^(args):\s*(.*\S)\s*$/) {
2677 $conf->{$key} = $value;
2678 } elsif ($line =~ m/^delete:\s*(.*\S)\s*$/) {
2680 if ($section eq 'pending') {
2681 $conf->{delete} = $value; # we parse this later
2683 warn "vm $vmid - propertry 'delete' is only allowed in [PENDING]\n";
2685 } elsif ($line =~ m/^([a-z][a-z_]*\d*):\s*(.+?)\s*$/) {
2688 eval { $value = check_type
($key, $value); };
2690 warn "vm $vmid - unable to parse value of '$key' - $@";
2692 $key = 'ide2' if $key eq 'cdrom';
2693 my $fmt = $confdesc->{$key}->{format
};
2694 if ($fmt && $fmt =~ /^pve-qm-(?:ide|scsi|virtio|sata)$/) {
2695 my $v = parse_drive
($key, $value);
2696 if (my $volid = filename_to_volume_id
($vmid, $v->{file
}, $v->{media
})) {
2697 $v->{file
} = $volid;
2698 $value = print_drive
($vmid, $v);
2700 warn "vm $vmid - unable to parse value of '$key'\n";
2705 $conf->{$key} = $value;
2710 if (defined($descr)) {
2712 $conf->{description
} = $descr;
2714 delete $res->{snapstate
}; # just to be sure
2719 sub write_vm_config
{
2720 my ($filename, $conf) = @_;
2722 delete $conf->{snapstate
}; # just to be sure
2724 if ($conf->{cdrom
}) {
2725 die "option ide2 conflicts with cdrom\n" if $conf->{ide2
};
2726 $conf->{ide2
} = $conf->{cdrom
};
2727 delete $conf->{cdrom
};
2730 # we do not use 'smp' any longer
2731 if ($conf->{sockets
}) {
2732 delete $conf->{smp
};
2733 } elsif ($conf->{smp
}) {
2734 $conf->{sockets
} = $conf->{smp
};
2735 delete $conf->{cores
};
2736 delete $conf->{smp
};
2739 my $used_volids = {};
2741 my $cleanup_config = sub {
2742 my ($cref, $pending, $snapname) = @_;
2744 foreach my $key (keys %$cref) {
2745 next if $key eq 'digest' || $key eq 'description' || $key eq 'snapshots' ||
2746 $key eq 'snapstate' || $key eq 'pending';
2747 my $value = $cref->{$key};
2748 if ($key eq 'delete') {
2749 die "propertry 'delete' is only allowed in [PENDING]\n"
2751 # fixme: check syntax?
2754 eval { $value = check_type
($key, $value); };
2755 die "unable to parse value of '$key' - $@" if $@;
2757 $cref->{$key} = $value;
2759 if (!$snapname && is_valid_drivename
($key)) {
2760 my $drive = parse_drive
($key, $value);
2761 $used_volids->{$drive->{file
}} = 1 if $drive && $drive->{file
};
2766 &$cleanup_config($conf);
2768 &$cleanup_config($conf->{pending
}, 1);
2770 foreach my $snapname (keys %{$conf->{snapshots
}}) {
2771 die "internal error" if $snapname eq 'pending';
2772 &$cleanup_config($conf->{snapshots
}->{$snapname}, undef, $snapname);
2775 # remove 'unusedX' settings if we re-add a volume
2776 foreach my $key (keys %$conf) {
2777 my $value = $conf->{$key};
2778 if ($key =~ m/^unused/ && $used_volids->{$value}) {
2779 delete $conf->{$key};
2783 my $generate_raw_config = sub {
2784 my ($conf, $pending) = @_;
2788 # add description as comment to top of file
2789 if (defined(my $descr = $conf->{description
})) {
2791 foreach my $cl (split(/\n/, $descr)) {
2792 $raw .= '#' . PVE
::Tools
::encode_text
($cl) . "\n";
2795 $raw .= "#\n" if $pending;
2799 foreach my $key (sort keys %$conf) {
2800 next if $key eq 'digest' || $key eq 'description' || $key eq 'pending' || $key eq 'snapshots';
2801 $raw .= "$key: $conf->{$key}\n";
2806 my $raw = &$generate_raw_config($conf);
2808 if (scalar(keys %{$conf->{pending
}})){
2809 $raw .= "\n[PENDING]\n";
2810 $raw .= &$generate_raw_config($conf->{pending
}, 1);
2813 foreach my $snapname (sort keys %{$conf->{snapshots
}}) {
2814 $raw .= "\n[$snapname]\n";
2815 $raw .= &$generate_raw_config($conf->{snapshots
}->{$snapname});
2825 # we use static defaults from our JSON schema configuration
2826 foreach my $key (keys %$confdesc) {
2827 if (defined(my $default = $confdesc->{$key}->{default})) {
2828 $res->{$key} = $default;
2836 my $vmlist = PVE
::Cluster
::get_vmlist
();
2838 return $res if !$vmlist || !$vmlist->{ids
};
2839 my $ids = $vmlist->{ids
};
2841 foreach my $vmid (keys %$ids) {
2842 my $d = $ids->{$vmid};
2843 next if !$d->{node
} || $d->{node
} ne $nodename;
2844 next if !$d->{type
} || $d->{type
} ne 'qemu';
2845 $res->{$vmid}->{exists} = 1;
2850 # test if VM uses local resources (to prevent migration)
2851 sub check_local_resources
{
2852 my ($conf, $noerr) = @_;
2856 $loc_res = 1 if $conf->{hostusb
}; # old syntax
2857 $loc_res = 1 if $conf->{hostpci
}; # old syntax
2859 $loc_res = 1 if $conf->{ivshmem
};
2861 foreach my $k (keys %$conf) {
2862 next if $k =~ m/^usb/ && ($conf->{$k} eq 'spice');
2863 # sockets are safe: they will recreated be on the target side post-migrate
2864 next if $k =~ m/^serial/ && ($conf->{$k} eq 'socket');
2865 $loc_res = 1 if $k =~ m/^(usb|hostpci|serial|parallel)\d+$/;
2868 die "VM uses local resources\n" if $loc_res && !$noerr;
2873 # check if used storages are available on all nodes (use by migrate)
2874 sub check_storage_availability
{
2875 my ($storecfg, $conf, $node) = @_;
2877 foreach_drive
($conf, sub {
2878 my ($ds, $drive) = @_;
2880 my $volid = $drive->{file
};
2883 my ($sid, $volname) = PVE
::Storage
::parse_volume_id
($volid, 1);
2886 # check if storage is available on both nodes
2887 my $scfg = PVE
::Storage
::storage_check_node
($storecfg, $sid);
2888 PVE
::Storage
::storage_check_node
($storecfg, $sid, $node);
2892 # list nodes where all VM images are available (used by has_feature API)
2894 my ($conf, $storecfg) = @_;
2896 my $nodelist = PVE
::Cluster
::get_nodelist
();
2897 my $nodehash = { map { $_ => 1 } @$nodelist };
2898 my $nodename = PVE
::INotify
::nodename
();
2900 foreach_drive
($conf, sub {
2901 my ($ds, $drive) = @_;
2903 my $volid = $drive->{file
};
2906 my ($storeid, $volname) = PVE
::Storage
::parse_volume_id
($volid, 1);
2908 my $scfg = PVE
::Storage
::storage_config
($storecfg, $storeid);
2909 if ($scfg->{disable
}) {
2911 } elsif (my $avail = $scfg->{nodes
}) {
2912 foreach my $node (keys %$nodehash) {
2913 delete $nodehash->{$node} if !$avail->{$node};
2915 } elsif (!$scfg->{shared
}) {
2916 foreach my $node (keys %$nodehash) {
2917 delete $nodehash->{$node} if $node ne $nodename
2927 my ($pidfile, $pid) = @_;
2929 my $fh = IO
::File-
>new("/proc/$pid/cmdline", "r");
2933 return undef if !$line;
2934 my @param = split(/\0/, $line);
2936 my $cmd = $param[0];
2937 return if !$cmd || ($cmd !~ m
|kvm
$| && $cmd !~ m
@(?
:^|/)qemu-system-[^/]+$@);
2939 for (my $i = 0; $i < scalar (@param); $i++) {
2942 if (($p eq '-pidfile') || ($p eq '--pidfile')) {
2943 my $p = $param[$i+1];
2944 return 1 if $p && ($p eq $pidfile);
2953 my ($vmid, $nocheck, $node) = @_;
2955 my $filename = PVE
::QemuConfig-
>config_file($vmid, $node);
2957 die "unable to find configuration file for VM $vmid - no such machine\n"
2958 if !$nocheck && ! -f
$filename;
2960 my $pidfile = pidfile_name
($vmid);
2962 if (my $fd = IO
::File-
>new("<$pidfile")) {
2967 my $mtime = $st->mtime;
2968 if ($mtime > time()) {
2969 warn "file '$filename' modified in future\n";
2972 if ($line =~ m/^(\d+)$/) {
2974 if (check_cmdline
($pidfile, $pid)) {
2975 if (my $pinfo = PVE
::ProcFSTools
::check_process_running
($pid)) {
2987 my $vzlist = config_list
();
2989 my $fd = IO
::Dir-
>new($var_run_tmpdir) || return $vzlist;
2991 while (defined(my $de = $fd->read)) {
2992 next if $de !~ m/^(\d+)\.pid$/;
2994 next if !defined($vzlist->{$vmid});
2995 if (my $pid = check_running
($vmid)) {
2996 $vzlist->{$vmid}->{pid
} = $pid;
3004 my ($storecfg, $conf) = @_;
3006 my $bootdisk = $conf->{bootdisk
};
3007 return undef if !$bootdisk;
3008 return undef if !is_valid_drivename
($bootdisk);
3010 return undef if !$conf->{$bootdisk};
3012 my $drive = parse_drive
($bootdisk, $conf->{$bootdisk});
3013 return undef if !defined($drive);
3015 return undef if drive_is_cdrom
($drive);
3017 my $volid = $drive->{file
};
3018 return undef if !$volid;
3020 return $drive->{size
};
3023 our $vmstatus_return_properties = {
3024 vmid
=> get_standard_option
('pve-vmid'),
3026 description
=> "Qemu process status.",
3028 enum
=> ['stopped', 'running'],
3031 description
=> "Maximum memory in bytes.",
3034 renderer
=> 'bytes',
3037 description
=> "Root disk size in bytes.",
3040 renderer
=> 'bytes',
3043 description
=> "VM name.",
3048 description
=> "Qemu QMP agent status.",
3053 description
=> "PID of running qemu process.",
3058 description
=> "Uptime.",
3061 renderer
=> 'duration',
3064 description
=> "Maximum usable CPUs.",
3070 my $last_proc_pid_stat;
3072 # get VM status information
3073 # This must be fast and should not block ($full == false)
3074 # We only query KVM using QMP if $full == true (this can be slow)
3076 my ($opt_vmid, $full) = @_;
3080 my $storecfg = PVE
::Storage
::config
();
3082 my $list = vzlist
();
3083 my $defaults = load_defaults
();
3085 my ($uptime) = PVE
::ProcFSTools
::read_proc_uptime
(1);
3087 my $cpucount = $cpuinfo->{cpus
} || 1;
3089 foreach my $vmid (keys %$list) {
3090 next if $opt_vmid && ($vmid ne $opt_vmid);
3092 my $cfspath = PVE
::QemuConfig-
>cfs_config_path($vmid);
3093 my $conf = PVE
::Cluster
::cfs_read_file
($cfspath) || {};
3095 my $d = { vmid
=> $vmid };
3096 $d->{pid
} = $list->{$vmid}->{pid
};
3098 # fixme: better status?
3099 $d->{status
} = $list->{$vmid}->{pid
} ?
'running' : 'stopped';
3101 my $size = disksize
($storecfg, $conf);
3102 if (defined($size)) {
3103 $d->{disk
} = 0; # no info available
3104 $d->{maxdisk
} = $size;
3110 $d->{cpus
} = ($conf->{sockets
} || $defaults->{sockets
})
3111 * ($conf->{cores
} || $defaults->{cores
});
3112 $d->{cpus
} = $cpucount if $d->{cpus
} > $cpucount;
3113 $d->{cpus
} = $conf->{vcpus
} if $conf->{vcpus
};
3115 $d->{name
} = $conf->{name
} || "VM $vmid";
3116 $d->{maxmem
} = $conf->{memory
} ?
$conf->{memory
}*(1024*1024)
3117 : $defaults->{memory
}*(1024*1024);
3119 if ($conf->{balloon
}) {
3120 $d->{balloon_min
} = $conf->{balloon
}*(1024*1024);
3121 $d->{shares
} = defined($conf->{shares
}) ?
$conf->{shares
}
3122 : $defaults->{shares
};
3133 $d->{diskwrite
} = 0;
3135 $d->{template
} = PVE
::QemuConfig-
>is_template($conf);
3137 $d->{serial
} = 1 if conf_has_serial
($conf);
3142 my $netdev = PVE
::ProcFSTools
::read_proc_net_dev
();
3143 foreach my $dev (keys %$netdev) {
3144 next if $dev !~ m/^tap([1-9]\d*)i/;
3146 my $d = $res->{$vmid};
3149 $d->{netout
} += $netdev->{$dev}->{receive
};
3150 $d->{netin
} += $netdev->{$dev}->{transmit
};
3153 $d->{nics
}->{$dev}->{netout
} = $netdev->{$dev}->{receive
};
3154 $d->{nics
}->{$dev}->{netin
} = $netdev->{$dev}->{transmit
};
3159 my $ctime = gettimeofday
;
3161 foreach my $vmid (keys %$list) {
3163 my $d = $res->{$vmid};
3164 my $pid = $d->{pid
};
3167 my $pstat = PVE
::ProcFSTools
::read_proc_pid_stat
($pid);
3168 next if !$pstat; # not running
3170 my $used = $pstat->{utime} + $pstat->{stime
};
3172 $d->{uptime
} = int(($uptime - $pstat->{starttime
})/$cpuinfo->{user_hz
});
3174 if ($pstat->{vsize
}) {
3175 $d->{mem
} = int(($pstat->{rss
}/$pstat->{vsize
})*$d->{maxmem
});
3178 my $old = $last_proc_pid_stat->{$pid};
3180 $last_proc_pid_stat->{$pid} = {
3188 my $dtime = ($ctime - $old->{time}) * $cpucount * $cpuinfo->{user_hz
};
3190 if ($dtime > 1000) {
3191 my $dutime = $used - $old->{used
};
3193 $d->{cpu
} = (($dutime/$dtime)* $cpucount) / $d->{cpus
};
3194 $last_proc_pid_stat->{$pid} = {
3200 $d->{cpu
} = $old->{cpu
};
3204 return $res if !$full;
3206 my $qmpclient = PVE
::QMPClient-
>new();
3208 my $ballooncb = sub {
3209 my ($vmid, $resp) = @_;
3211 my $info = $resp->{'return'};
3212 return if !$info->{max_mem
};
3214 my $d = $res->{$vmid};
3216 # use memory assigned to VM
3217 $d->{maxmem
} = $info->{max_mem
};
3218 $d->{balloon
} = $info->{actual
};
3220 if (defined($info->{total_mem
}) && defined($info->{free_mem
})) {
3221 $d->{mem
} = $info->{total_mem
} - $info->{free_mem
};
3222 $d->{freemem
} = $info->{free_mem
};
3225 $d->{ballooninfo
} = $info;
3228 my $blockstatscb = sub {
3229 my ($vmid, $resp) = @_;
3230 my $data = $resp->{'return'} || [];
3231 my $totalrdbytes = 0;
3232 my $totalwrbytes = 0;
3234 for my $blockstat (@$data) {
3235 $totalrdbytes = $totalrdbytes + $blockstat->{stats
}->{rd_bytes
};
3236 $totalwrbytes = $totalwrbytes + $blockstat->{stats
}->{wr_bytes
};
3238 $blockstat->{device
} =~ s/drive-//;
3239 $res->{$vmid}->{blockstat
}->{$blockstat->{device
}} = $blockstat->{stats
};
3241 $res->{$vmid}->{diskread
} = $totalrdbytes;
3242 $res->{$vmid}->{diskwrite
} = $totalwrbytes;
3245 my $statuscb = sub {
3246 my ($vmid, $resp) = @_;
3248 $qmpclient->queue_cmd($vmid, $blockstatscb, 'query-blockstats');
3249 # this fails if ballon driver is not loaded, so this must be
3250 # the last commnand (following command are aborted if this fails).
3251 $qmpclient->queue_cmd($vmid, $ballooncb, 'query-balloon');
3253 my $status = 'unknown';
3254 if (!defined($status = $resp->{'return'}->{status
})) {
3255 warn "unable to get VM status\n";
3259 $res->{$vmid}->{qmpstatus
} = $resp->{'return'}->{status
};
3262 foreach my $vmid (keys %$list) {
3263 next if $opt_vmid && ($vmid ne $opt_vmid);
3264 next if !$res->{$vmid}->{pid
}; # not running
3265 $qmpclient->queue_cmd($vmid, $statuscb, 'query-status');
3268 $qmpclient->queue_execute(undef, 2);
3270 foreach my $vmid (keys %$list) {
3271 next if $opt_vmid && ($vmid ne $opt_vmid);
3272 $res->{$vmid}->{qmpstatus
} = $res->{$vmid}->{status
} if !$res->{$vmid}->{qmpstatus
};
3279 my ($conf, $func, @param) = @_;
3281 foreach my $ds (valid_drive_names
()) {
3282 next if !defined($conf->{$ds});
3284 my $drive = parse_drive
($ds, $conf->{$ds});
3287 &$func($ds, $drive, @param);
3292 my ($conf, $func, @param) = @_;
3296 my $test_volid = sub {
3297 my ($volid, $is_cdrom, $replicate, $shared, $snapname) = @_;
3301 $volhash->{$volid}->{cdrom
} //= 1;
3302 $volhash->{$volid}->{cdrom
} = 0 if !$is_cdrom;
3304 $volhash->{$volid}->{replicate
} //= 0;
3305 $volhash->{$volid}->{replicate
} = 1 if $replicate;
3307 $volhash->{$volid}->{shared
} //= 0;
3308 $volhash->{$volid}->{shared
} = 1 if $shared;
3310 $volhash->{$volid}->{referenced_in_config
} //= 0;
3311 $volhash->{$volid}->{referenced_in_config
} = 1 if !defined($snapname);
3313 $volhash->{$volid}->{referenced_in_snapshot
}->{$snapname} = 1
3314 if defined($snapname);
3317 foreach_drive
($conf, sub {
3318 my ($ds, $drive) = @_;
3319 $test_volid->($drive->{file
}, drive_is_cdrom
($drive), $drive->{replicate
} // 1, $drive->{shared
}, undef);
3322 foreach my $snapname (keys %{$conf->{snapshots
}}) {
3323 my $snap = $conf->{snapshots
}->{$snapname};
3324 $test_volid->($snap->{vmstate
}, 0, 1, $snapname);
3325 foreach_drive
($snap, sub {
3326 my ($ds, $drive) = @_;
3327 $test_volid->($drive->{file
}, drive_is_cdrom
($drive), $drive->{replicate
} // 1, $drive->{shared
}, $snapname);
3331 foreach my $volid (keys %$volhash) {
3332 &$func($volid, $volhash->{$volid}, @param);
3336 sub conf_has_serial
{
3339 for (my $i = 0; $i < $MAX_SERIAL_PORTS; $i++) {
3340 if ($conf->{"serial$i"}) {
3348 sub vga_conf_has_spice
{
3351 my $vgaconf = parse_vga
($vga);
3352 my $vgatype = $vgaconf->{type
};
3353 return 0 if !$vgatype || $vgatype !~ m/^qxl([234])?$/;
3358 my $host_arch; # FIXME: fix PVE::Tools::get_host_arch
3359 sub get_host_arch
() {
3360 $host_arch = (POSIX
::uname
())[4] if !$host_arch;
3366 return get_host_arch
() eq $arch;
3369 my $default_machines = {
3374 sub get_basic_machine_info
{
3375 my ($conf, $forcemachine) = @_;
3377 my $arch = $conf->{arch
} // get_host_arch
();
3378 my $machine = $forcemachine || $conf->{machine
} || $default_machines->{$arch};
3379 return ($arch, $machine);
3382 sub get_ovmf_files
($) {
3385 my $ovmf = $OVMF->{$arch}
3386 or die "no OVMF images known for architecture '$arch'\n";
3392 aarch64
=> '/usr/bin/qemu-system-aarch64',
3393 x86_64
=> '/usr/bin/qemu-system-x86_64',
3395 sub get_command_for_arch
($) {
3397 return '/usr/bin/kvm' if is_native
($arch);
3399 my $cmd = $Arch2Qemu->{$arch}
3400 or die "don't know how to emulate architecture '$arch'\n";
3404 sub get_cpu_options
{
3405 my ($conf, $arch, $kvm, $machine_type, $kvm_off, $kvmver, $winversion, $gpu_passthrough) = @_;
3408 my $ostype = $conf->{ostype
};
3410 my $cpu = $kvm ?
"kvm64" : "qemu64";
3411 if ($arch eq 'aarch64') {
3412 $cpu = 'cortex-a57';
3415 if (my $cputype = $conf->{cpu
}) {
3416 my $cpuconf = PVE
::JSONSchema
::parse_property_string
($cpu_fmt, $cputype)
3417 or die "Cannot parse cpu description: $cputype\n";
3418 $cpu = $cpuconf->{cputype
};
3419 $kvm_off = 1 if $cpuconf->{hidden
};
3420 $hv_vendor_id = $cpuconf->{'hv-vendor-id'};
3422 if (defined(my $flags = $cpuconf->{flags
})) {
3423 push @$cpuFlags, split(";", $flags);
3427 push @$cpuFlags , '+lahf_lm' if $cpu eq 'kvm64' && $arch eq 'x86_64';
3429 push @$cpuFlags , '-x2apic'
3430 if $conf->{ostype
} && $conf->{ostype
} eq 'solaris';
3432 push @$cpuFlags, '+sep' if $cpu eq 'kvm64' || $cpu eq 'kvm32';
3434 push @$cpuFlags, '-rdtscp' if $cpu =~ m/^Opteron/;
3436 if (qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 3) && $arch eq 'x86_64') {
3438 push @$cpuFlags , '+kvm_pv_unhalt' if $kvm;
3439 push @$cpuFlags , '+kvm_pv_eoi' if $kvm;
3442 add_hyperv_enlightenments
($cpuFlags, $winversion, $machine_type, $kvmver, $conf->{bios
}, $gpu_passthrough, $hv_vendor_id) if $kvm;
3444 push @$cpuFlags, 'enforce' if $cpu ne 'host' && $kvm && $arch eq 'x86_64';
3446 push @$cpuFlags, 'kvm=off' if $kvm_off;
3448 if (my $cpu_vendor = $cpu_vendor_list->{$cpu}) {
3449 push @$cpuFlags, "vendor=${cpu_vendor}"
3450 if $cpu_vendor ne 'default';
3451 } elsif ($arch ne 'aarch64') {
3452 die "internal error"; # should not happen
3455 $cpu .= "," . join(',', @$cpuFlags) if scalar(@$cpuFlags);
3457 return ('-cpu', $cpu);
3460 sub config_to_command
{
3461 my ($storecfg, $vmid, $conf, $defaults, $forcemachine) = @_;
3464 my $globalFlags = [];
3465 my $machineFlags = [];
3470 my $kvmver = kvm_user_version
();
3471 my $vernum = 0; # unknown
3472 my $ostype = $conf->{ostype
};
3473 my $winversion = windows_version
($ostype);
3474 my $kvm = $conf->{kvm
};
3476 my ($arch, $machine_type) = get_basic_machine_info
($conf, $forcemachine);
3477 $kvm //= 1 if is_native
($arch);
3480 die "KVM virtualisation configured, but not available. Either disable in VM configuration or enable in BIOS.\n"
3481 if !defined kvm_version
();
3484 if ($kvmver =~ m/^(\d+)\.(\d+)$/) {
3485 $vernum = $1*1000000+$2*1000;
3486 } elsif ($kvmver =~ m/^(\d+)\.(\d+)\.(\d+)$/) {
3487 $vernum = $1*1000000+$2*1000+$3;
3490 die "detected old qemu-kvm binary ($kvmver)\n" if $vernum < 15000;
3492 my $have_ovz = -f
'/proc/vz/vestat';
3494 my $q35 = machine_type_is_q35
($conf);
3495 my $hotplug_features = parse_hotplug_features
(defined($conf->{hotplug
}) ?
$conf->{hotplug
} : '1');
3496 my $use_old_bios_files = undef;
3497 ($use_old_bios_files, $machine_type) = qemu_use_old_bios_files
($machine_type);
3499 my $cpuunits = defined($conf->{cpuunits
}) ?
3500 $conf->{cpuunits
} : $defaults->{cpuunits
};
3502 push @$cmd, get_command_for_arch
($arch);
3504 push @$cmd, '-id', $vmid;
3506 my $vmname = $conf->{name
} || "vm$vmid";
3508 push @$cmd, '-name', $vmname;
3512 my $qmpsocket = qmp_socket
($vmid);
3513 push @$cmd, '-chardev', "socket,id=qmp,path=$qmpsocket,server,nowait";
3514 push @$cmd, '-mon', "chardev=qmp,mode=control";
3516 if (qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 12)) {
3517 push @$cmd, '-chardev', "socket,id=qmp-event,path=/var/run/qmeventd.sock,reconnect=5";
3518 push @$cmd, '-mon', "chardev=qmp-event,mode=control";
3521 push @$cmd, '-pidfile' , pidfile_name
($vmid);
3523 push @$cmd, '-daemonize';
3525 if ($conf->{smbios1
}) {
3526 push @$cmd, '-smbios', "type=1,$conf->{smbios1}";
3529 if ($conf->{vmgenid
}) {
3530 push @$devices, '-device', 'vmgenid,guid='.$conf->{vmgenid
};
3533 my ($ovmf_code, $ovmf_vars) = get_ovmf_files
($arch);
3534 if ($conf->{bios
} && $conf->{bios
} eq 'ovmf') {
3535 die "uefi base image not found\n" if ! -f
$ovmf_code;
3539 if (my $efidisk = $conf->{efidisk0
}) {
3540 my $d = PVE
::JSONSchema
::parse_property_string
($efidisk_fmt, $efidisk);
3541 my ($storeid, $volname) = PVE
::Storage
::parse_volume_id
($d->{file
}, 1);
3542 $format = $d->{format
};
3544 $path = PVE
::Storage
::path
($storecfg, $d->{file
});
3545 if (!defined($format)) {
3546 my $scfg = PVE
::Storage
::storage_config
($storecfg, $storeid);
3547 $format = qemu_img_format
($scfg, $volname);
3551 die "efidisk format must be specified\n"
3552 if !defined($format);
3555 warn "no efidisk configured! Using temporary efivars disk.\n";
3556 $path = "/tmp/$vmid-ovmf.fd";
3557 PVE
::Tools
::file_copy
($ovmf_vars, $path, -s
$ovmf_vars);
3561 push @$cmd, '-drive', "if=pflash,unit=0,format=raw,readonly,file=$ovmf_code";
3562 push @$cmd, '-drive', "if=pflash,unit=1,format=$format,id=drive-efidisk0,file=$path";
3566 # add usb controllers
3567 my @usbcontrollers = PVE
::QemuServer
::USB
::get_usb_controllers
($conf, $bridges, $arch, $machine_type, $usbdesc->{format
}, $MAX_USB_DEVICES);
3568 push @$devices, @usbcontrollers if @usbcontrollers;
3569 my $vga = parse_vga
($conf->{vga
});
3571 my $qxlnum = vga_conf_has_spice
($conf->{vga
});
3572 $vga->{type
} = 'qxl' if $qxlnum;
3574 if (!$vga->{type
}) {
3575 if ($arch eq 'aarch64') {
3576 $vga->{type
} = 'virtio';
3577 } elsif (qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 9)) {
3578 $vga->{type
} = (!$winversion || $winversion >= 6) ?
'std' : 'cirrus';
3580 $vga->{type
} = ($winversion >= 6) ?
'std' : 'cirrus';
3584 # enable absolute mouse coordinates (needed by vnc)
3586 if (defined($conf->{tablet
})) {
3587 $tablet = $conf->{tablet
};
3589 $tablet = $defaults->{tablet
};
3590 $tablet = 0 if $qxlnum; # disable for spice because it is not needed
3591 $tablet = 0 if $vga->{type
} =~ m/^serial\d+$/; # disable if we use serial terminal (no vga card)
3595 push @$devices, '-device', print_tabletdevice_full
($conf, $arch) if $tablet;
3596 my $kbd = print_keyboarddevice_full
($conf, $arch);
3597 push @$devices, '-device', $kbd if defined($kbd);
3601 my $gpu_passthrough;
3604 for (my $i = 0; $i < $MAX_HOSTPCI_DEVICES; $i++) {
3605 my $d = parse_hostpci
($conf->{"hostpci$i"});
3608 my $pcie = $d->{pcie
};
3610 die "q35 machine model is not enabled" if !$q35;
3611 # win7 wants to have the pcie devices directly on the pcie bus
3612 # instead of in the root port
3613 if ($winversion == 7) {
3614 $pciaddr = print_pcie_addr
("hostpci${i}bus0");
3616 $pciaddr = print_pcie_addr
("hostpci$i");
3619 $pciaddr = print_pci_addr
("hostpci$i", $bridges, $arch, $machine_type);
3622 my $rombar = defined($d->{rombar
}) && !$d->{rombar
} ?
',rombar=0' : '';
3623 my $romfile = $d->{romfile
};
3626 if ($d->{'x-vga'}) {
3627 $xvga = ',x-vga=on';
3629 $vga->{type
} = 'none' if !defined($conf->{vga
});
3630 $gpu_passthrough = 1;
3632 if ($conf->{bios
} && $conf->{bios
} eq 'ovmf') {
3636 my $pcidevices = $d->{pciid
};
3637 my $multifunction = 1 if @$pcidevices > 1;
3639 if ($d->{mdev
} && scalar(@$pcidevices) == 1) {
3640 my $id = $pcidevices->[0]->{id
};
3641 my $uuid = PVE
::SysFSTools
::generate_mdev_uuid
($vmid, $i);
3642 $sysfspath = "/sys/bus/pci/devices/0000:$id/$uuid";
3643 } elsif ($d->{mdev
}) {
3644 warn "ignoring mediated device with multifunction device\n";
3648 foreach my $pcidevice (@$pcidevices) {
3650 my $id = "hostpci$i";
3651 $id .= ".$j" if $multifunction;
3652 my $addr = $pciaddr;
3653 $addr .= ".$j" if $multifunction;
3654 my $devicestr = "vfio-pci";
3656 $devicestr .= ",sysfsdev=$sysfspath";
3658 $devicestr .= ",host=$pcidevice->{id}";
3660 $devicestr .= ",id=$id$addr";
3663 $devicestr .= "$rombar$xvga";
3664 $devicestr .= ",multifunction=on" if $multifunction;
3665 $devicestr .= ",romfile=/usr/share/kvm/$romfile" if $romfile;
3668 push @$devices, '-device', $devicestr;
3674 my @usbdevices = PVE
::QemuServer
::USB
::get_usb_devices
($conf, $usbdesc->{format
}, $MAX_USB_DEVICES);
3675 push @$devices, @usbdevices if @usbdevices;
3677 for (my $i = 0; $i < $MAX_SERIAL_PORTS; $i++) {
3678 if (my $path = $conf->{"serial$i"}) {
3679 if ($path eq 'socket') {
3680 my $socket = "/var/run/qemu-server/${vmid}.serial$i";
3681 push @$devices, '-chardev', "socket,id=serial$i,path=$socket,server,nowait";
3682 # On aarch64, serial0 is the UART device. Qemu only allows
3683 # connecting UART devices via the '-serial' command line, as
3684 # the device has a fixed slot on the hardware...
3685 if ($arch eq 'aarch64' && $i == 0) {
3686 push @$devices, '-serial', "chardev:serial$i";
3688 push @$devices, '-device', "isa-serial,chardev=serial$i";
3691 die "no such serial device\n" if ! -c
$path;
3692 push @$devices, '-chardev', "tty,id=serial$i,path=$path";
3693 push @$devices, '-device', "isa-serial,chardev=serial$i";
3699 for (my $i = 0; $i < $MAX_PARALLEL_PORTS; $i++) {
3700 if (my $path = $conf->{"parallel$i"}) {
3701 die "no such parallel device\n" if ! -c
$path;
3702 my $devtype = $path =~ m!^/dev/usb/lp! ?
'tty' : 'parport';
3703 push @$devices, '-chardev', "$devtype,id=parallel$i,path=$path";
3704 push @$devices, '-device', "isa-parallel,chardev=parallel$i";
3710 $sockets = $conf->{smp
} if $conf->{smp
}; # old style - no longer iused
3711 $sockets = $conf->{sockets
} if $conf->{sockets
};
3713 my $cores = $conf->{cores
} || 1;
3715 my $maxcpus = $sockets * $cores;
3717 my $vcpus = $conf->{vcpus
} ?
$conf->{vcpus
} : $maxcpus;
3719 my $allowed_vcpus = $cpuinfo->{cpus
};
3721 die "MAX $allowed_vcpus vcpus allowed per VM on this node\n"
3722 if ($allowed_vcpus < $maxcpus);
3724 if($hotplug_features->{cpu
} && qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 7)) {
3726 push @$cmd, '-smp', "1,sockets=$sockets,cores=$cores,maxcpus=$maxcpus";
3727 for (my $i = 2; $i <= $vcpus; $i++) {
3728 my $cpustr = print_cpu_device
($conf,$i);
3729 push @$cmd, '-device', $cpustr;
3734 push @$cmd, '-smp', "$vcpus,sockets=$sockets,cores=$cores,maxcpus=$maxcpus";
3736 push @$cmd, '-nodefaults';
3738 my $bootorder = $conf->{boot
} || $confdesc->{boot
}->{default};
3740 my $bootindex_hash = {};
3742 foreach my $o (split(//, $bootorder)) {
3743 $bootindex_hash->{$o} = $i*100;
3747 push @$cmd, '-boot', "menu=on,strict=on,reboot-timeout=1000,splash=/usr/share/qemu-server/bootsplash.jpg";
3749 push @$cmd, '-no-acpi' if defined($conf->{acpi
}) && $conf->{acpi
} == 0;
3751 push @$cmd, '-no-reboot' if defined($conf->{reboot
}) && $conf->{reboot
} == 0;
3753 if ($vga->{type
} && $vga->{type
} !~ m/^serial\d+$/ && $vga->{type
} ne 'none'){
3754 push @$devices, '-device', print_vga_device
($conf, $vga, $arch, $machine_type, undef, $qxlnum, $bridges);
3755 my $socket = vnc_socket
($vmid);
3756 push @$cmd, '-vnc', "unix:$socket,x509,password";
3758 push @$cmd, '-vga', 'none' if $vga->{type
} eq 'none';
3759 push @$cmd, '-nographic';
3763 my $tdf = defined($conf->{tdf
}) ?
$conf->{tdf
} : $defaults->{tdf
};
3765 my $useLocaltime = $conf->{localtime};
3767 if ($winversion >= 5) { # windows
3768 $useLocaltime = 1 if !defined($conf->{localtime});
3770 # use time drift fix when acpi is enabled
3771 if (!(defined($conf->{acpi
}) && $conf->{acpi
} == 0)) {
3772 $tdf = 1 if !defined($conf->{tdf
});
3776 if ($winversion >= 6) {
3777 push @$globalFlags, 'kvm-pit.lost_tick_policy=discard';
3778 push @$cmd, '-no-hpet';
3781 push @$rtcFlags, 'driftfix=slew' if $tdf;
3784 push @$machineFlags, 'accel=tcg';
3787 if ($machine_type) {
3788 push @$machineFlags, "type=${machine_type}";
3791 if ($conf->{startdate
}) {
3792 push @$rtcFlags, "base=$conf->{startdate}";
3793 } elsif ($useLocaltime) {
3794 push @$rtcFlags, 'base=localtime';
3797 push @$cmd, get_cpu_options
($conf, $arch, $kvm, $machine_type, $kvm_off, $kvmver, $winversion, $gpu_passthrough);
3799 PVE
::QemuServer
::Memory
::config
($conf, $vmid, $sockets, $cores, $defaults, $hotplug_features, $cmd);
3801 push @$cmd, '-S' if $conf->{freeze
};
3803 push @$cmd, '-k', $conf->{keyboard
} if defined($conf->{keyboard
});
3806 #my $soundhw = $conf->{soundhw} || $defaults->{soundhw};
3807 #push @$cmd, '-soundhw', 'es1370';
3808 #push @$cmd, '-soundhw', $soundhw if $soundhw;
3810 if (parse_guest_agent
($conf)->{enabled
}) {
3811 my $qgasocket = qmp_socket
($vmid, 1);
3812 my $pciaddr = print_pci_addr
("qga0", $bridges, $arch, $machine_type);
3813 push @$devices, '-chardev', "socket,path=$qgasocket,server,nowait,id=qga0";
3814 push @$devices, '-device', "virtio-serial,id=qga0$pciaddr";
3815 push @$devices, '-device', 'virtserialport,chardev=qga0,name=org.qemu.guest_agent.0';
3823 for(my $i = 1; $i < $qxlnum; $i++){
3824 push @$devices, '-device', print_vga_device
($conf, $vga, $arch, $machine_type, $i, $qxlnum, $bridges);
3827 # assume other OS works like Linux
3828 my ($ram, $vram) = ("134217728", "67108864");
3829 if ($vga->{memory
}) {
3830 $ram = PVE
::Tools
::convert_size
($qxlnum*4*$vga->{memory
}, 'mb' => 'b');
3831 $vram = PVE
::Tools
::convert_size
($qxlnum*2*$vga->{memory
}, 'mb' => 'b');
3833 push @$cmd, '-global', "qxl-vga.ram_size=$ram";
3834 push @$cmd, '-global', "qxl-vga.vram_size=$vram";
3838 my $pciaddr = print_pci_addr
("spice", $bridges, $arch, $machine_type);
3840 my $nodename = PVE
::INotify
::nodename
();
3841 my $pfamily = PVE
::Tools
::get_host_address_family
($nodename);
3842 my @nodeaddrs = PVE
::Tools
::getaddrinfo_all
('localhost', family
=> $pfamily);
3843 die "failed to get an ip address of type $pfamily for 'localhost'\n" if !@nodeaddrs;
3844 my $localhost = PVE
::Network
::addr_to_ip
($nodeaddrs[0]->{addr
});
3845 $spice_port = PVE
::Tools
::next_spice_port
($pfamily, $localhost);
3847 push @$devices, '-spice', "tls-port=${spice_port},addr=$localhost,tls-ciphers=HIGH,seamless-migration=on";
3849 push @$devices, '-device', "virtio-serial,id=spice$pciaddr";
3850 push @$devices, '-chardev', "spicevmc,id=vdagent,name=vdagent";
3851 push @$devices, '-device', "virtserialport,chardev=vdagent,name=com.redhat.spice.0";
3854 # enable balloon by default, unless explicitly disabled
3855 if (!defined($conf->{balloon
}) || $conf->{balloon
}) {
3856 $pciaddr = print_pci_addr
("balloon0", $bridges, $arch, $machine_type);
3857 push @$devices, '-device', "virtio-balloon-pci,id=balloon0$pciaddr";
3860 if ($conf->{watchdog
}) {
3861 my $wdopts = parse_watchdog
($conf->{watchdog
});
3862 $pciaddr = print_pci_addr
("watchdog", $bridges, $arch, $machine_type);
3863 my $watchdog = $wdopts->{model
} || 'i6300esb';
3864 push @$devices, '-device', "$watchdog$pciaddr";
3865 push @$devices, '-watchdog-action', $wdopts->{action
} if $wdopts->{action
};
3869 my $scsicontroller = {};
3870 my $ahcicontroller = {};
3871 my $scsihw = defined($conf->{scsihw
}) ?
$conf->{scsihw
} : $defaults->{scsihw
};
3873 # Add iscsi initiator name if available
3874 if (my $initiator = get_initiator_name
()) {
3875 push @$devices, '-iscsi', "initiator-name=$initiator";
3878 foreach_drive
($conf, sub {
3879 my ($ds, $drive) = @_;
3881 if (PVE
::Storage
::parse_volume_id
($drive->{file
}, 1)) {
3882 push @$vollist, $drive->{file
};
3885 # ignore efidisk here, already added in bios/fw handling code above
3886 return if $drive->{interface
} eq 'efidisk';
3888 $use_virtio = 1 if $ds =~ m/^virtio/;
3890 if (drive_is_cdrom
($drive)) {
3891 if ($bootindex_hash->{d
}) {
3892 $drive->{bootindex
} = $bootindex_hash->{d
};
3893 $bootindex_hash->{d
} += 1;
3896 if ($bootindex_hash->{c
}) {
3897 $drive->{bootindex
} = $bootindex_hash->{c
} if $conf->{bootdisk
} && ($conf->{bootdisk
} eq $ds);
3898 $bootindex_hash->{c
} += 1;
3902 if($drive->{interface
} eq 'virtio'){
3903 push @$cmd, '-object', "iothread,id=iothread-$ds" if $drive->{iothread
};
3906 if ($drive->{interface
} eq 'scsi') {
3908 my ($maxdev, $controller, $controller_prefix) = scsihw_infos
($conf, $drive);
3910 $pciaddr = print_pci_addr
("$controller_prefix$controller", $bridges, $arch, $machine_type);
3911 my $scsihw_type = $scsihw =~ m/^virtio-scsi-single/ ?
"virtio-scsi-pci" : $scsihw;
3914 if($conf->{scsihw
} && $conf->{scsihw
} eq "virtio-scsi-single" && $drive->{iothread
}){
3915 $iothread .= ",iothread=iothread-$controller_prefix$controller";
3916 push @$cmd, '-object', "iothread,id=iothread-$controller_prefix$controller";
3917 } elsif ($drive->{iothread
}) {
3918 warn "iothread is only valid with virtio disk or virtio-scsi-single controller, ignoring\n";
3922 if($conf->{scsihw
} && $conf->{scsihw
} eq "virtio-scsi-single" && $drive->{queues
}){
3923 $queues = ",num_queues=$drive->{queues}";
3926 push @$devices, '-device', "$scsihw_type,id=$controller_prefix$controller$pciaddr$iothread$queues" if !$scsicontroller->{$controller};
3927 $scsicontroller->{$controller}=1;
3930 if ($drive->{interface
} eq 'sata') {
3931 my $controller = int($drive->{index} / $MAX_SATA_DISKS);
3932 $pciaddr = print_pci_addr
("ahci$controller", $bridges, $arch, $machine_type);
3933 push @$devices, '-device', "ahci,id=ahci$controller,multifunction=on$pciaddr" if !$ahcicontroller->{$controller};
3934 $ahcicontroller->{$controller}=1;
3937 my $drive_cmd = print_drive_full
($storecfg, $vmid, $drive);
3938 push @$devices, '-drive',$drive_cmd;
3939 push @$devices, '-device', print_drivedevice_full
($storecfg, $conf, $vmid, $drive, $bridges, $arch, $machine_type);
3942 for (my $i = 0; $i < $MAX_NETS; $i++) {
3943 next if !$conf->{"net$i"};
3944 my $d = parse_net
($conf->{"net$i"});
3947 $use_virtio = 1 if $d->{model
} eq 'virtio';
3949 if ($bootindex_hash->{n
}) {
3950 $d->{bootindex
} = $bootindex_hash->{n
};
3951 $bootindex_hash->{n
} += 1;
3954 my $netdevfull = print_netdev_full
($vmid, $conf, $arch, $d, "net$i");
3955 push @$devices, '-netdev', $netdevfull;
3957 my $netdevicefull = print_netdevice_full
($vmid, $conf, $d, "net$i", $bridges, $use_old_bios_files, $arch, $machine_type);
3958 push @$devices, '-device', $netdevicefull;
3961 if ($conf->{ivshmem
}) {
3962 my $ivshmem = PVE
::JSONSchema
::parse_property_string
($ivshmem_fmt, $conf->{ivshmem
});
3966 $bus = print_pcie_addr
("ivshmem");
3968 $bus = print_pci_addr
("ivshmem", $bridges, $arch, $machine_type);
3971 my $ivshmem_name = $ivshmem->{name
} // $vmid;
3972 my $path = '/dev/shm/pve-shm-' . $ivshmem_name;
3974 push @$devices, '-device', "ivshmem-plain,memdev=ivshmem$bus,";
3975 push @$devices, '-object', "memory-backend-file,id=ivshmem,share=on,mem-path=$path,size=$ivshmem->{size}M";
3980 if (qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 3)) {
3985 $bridges->{3} = 1 if $scsihw =~ m/^virtio-scsi-single/;
3987 while (my ($k, $v) = each %$bridges) {
3988 $pciaddr = print_pci_addr
("pci.$k", undef, $arch, $machine_type);
3989 unshift @$devices, '-device', "pci-bridge,id=pci.$k,chassis_nr=$k$pciaddr" if $k > 0;
3993 push @$cmd, @$devices;
3994 push @$cmd, '-rtc', join(',', @$rtcFlags)
3995 if scalar(@$rtcFlags);
3996 push @$cmd, '-machine', join(',', @$machineFlags)
3997 if scalar(@$machineFlags);
3998 push @$cmd, '-global', join(',', @$globalFlags)
3999 if scalar(@$globalFlags);
4002 if ($conf->{args
}) {
4003 my $aa = PVE
::Tools
::split_args
($conf->{args
});
4007 return wantarray ?
($cmd, $vollist, $spice_port) : $cmd;
4012 return "${var_run_tmpdir}/$vmid.vnc";
4018 my $res = vm_mon_cmd
($vmid, 'query-spice');
4020 return $res->{'tls-port'} || $res->{'port'} || die "no spice port\n";
4024 my ($vmid, $qga, $name) = @_;
4025 my $sockettype = $qga ?
'qga' : 'qmp';
4026 my $ext = $name ?
'-'.$name : '';
4027 return "${var_run_tmpdir}/$vmid$ext.$sockettype";
4032 return "${var_run_tmpdir}/$vmid.pid";
4035 sub vm_devices_list
{
4038 my $res = vm_mon_cmd
($vmid, 'query-pci');
4039 my $devices_to_check = [];
4041 foreach my $pcibus (@$res) {
4042 push @$devices_to_check, @{$pcibus->{devices
}},
4045 while (@$devices_to_check) {
4047 for my $d (@$devices_to_check) {
4048 $devices->{$d->{'qdev_id'}} = 1 if $d->{'qdev_id'};
4049 next if !$d->{'pci_bridge'};
4051 $devices->{$d->{'qdev_id'}} += scalar(@{$d->{'pci_bridge'}->{devices
}});
4052 push @$to_check, @{$d->{'pci_bridge'}->{devices
}};
4054 $devices_to_check = $to_check;
4057 my $resblock = vm_mon_cmd
($vmid, 'query-block');
4058 foreach my $block (@$resblock) {
4059 if($block->{device
} =~ m/^drive-(\S+)/){
4064 my $resmice = vm_mon_cmd
($vmid, 'query-mice');
4065 foreach my $mice (@$resmice) {
4066 if ($mice->{name
} eq 'QEMU HID Tablet') {
4067 $devices->{tablet
} = 1;
4072 # for usb devices there is no query-usb
4073 # but we can iterate over the entries in
4074 # qom-list path=/machine/peripheral
4075 my $resperipheral = vm_mon_cmd
($vmid, 'qom-list', path
=> '/machine/peripheral');
4076 foreach my $per (@$resperipheral) {
4077 if ($per->{name
} =~ m/^usb\d+$/) {
4078 $devices->{$per->{name
}} = 1;
4086 my ($storecfg, $conf, $vmid, $deviceid, $device, $arch, $machine_type) = @_;
4088 my $q35 = machine_type_is_q35
($conf);
4090 my $devices_list = vm_devices_list
($vmid);
4091 return 1 if defined($devices_list->{$deviceid});
4093 qemu_add_pci_bridge
($storecfg, $conf, $vmid, $deviceid, $arch, $machine_type); # add PCI bridge if we need it for the device
4095 if ($deviceid eq 'tablet') {
4097 qemu_deviceadd
($vmid, print_tabletdevice_full
($conf, $arch));
4099 } elsif ($deviceid eq 'keyboard') {
4101 qemu_deviceadd
($vmid, print_keyboarddevice_full
($conf, $arch));
4103 } elsif ($deviceid =~ m/^usb(\d+)$/) {
4105 die "usb hotplug currently not reliable\n";
4106 # since we can't reliably hot unplug all added usb devices
4107 # and usb passthrough disables live migration
4108 # we disable usb hotplugging for now
4109 qemu_deviceadd
($vmid, PVE
::QemuServer
::USB
::print_usbdevice_full
($conf, $deviceid, $device));
4111 } elsif ($deviceid =~ m/^(virtio)(\d+)$/) {
4113 qemu_iothread_add
($vmid, $deviceid, $device);
4115 qemu_driveadd
($storecfg, $vmid, $device);
4116 my $devicefull = print_drivedevice_full
($storecfg, $conf, $vmid, $device, $arch, $machine_type);
4118 qemu_deviceadd
($vmid, $devicefull);
4119 eval { qemu_deviceaddverify
($vmid, $deviceid); };
4121 eval { qemu_drivedel
($vmid, $deviceid); };
4126 } elsif ($deviceid =~ m/^(virtioscsi|scsihw)(\d+)$/) {
4129 my $scsihw = defined($conf->{scsihw
}) ?
$conf->{scsihw
} : "lsi";
4130 my $pciaddr = print_pci_addr
($deviceid, undef, $arch, $machine_type);
4131 my $scsihw_type = $scsihw eq 'virtio-scsi-single' ?
"virtio-scsi-pci" : $scsihw;
4133 my $devicefull = "$scsihw_type,id=$deviceid$pciaddr";
4135 if($deviceid =~ m/^virtioscsi(\d+)$/ && $device->{iothread
}) {
4136 qemu_iothread_add
($vmid, $deviceid, $device);
4137 $devicefull .= ",iothread=iothread-$deviceid";
4140 if($deviceid =~ m/^virtioscsi(\d+)$/ && $device->{queues
}) {
4141 $devicefull .= ",num_queues=$device->{queues}";
4144 qemu_deviceadd
($vmid, $devicefull);
4145 qemu_deviceaddverify
($vmid, $deviceid);
4147 } elsif ($deviceid =~ m/^(scsi)(\d+)$/) {
4149 qemu_findorcreatescsihw
($storecfg,$conf, $vmid, $device, $arch, $machine_type);
4150 qemu_driveadd
($storecfg, $vmid, $device);
4152 my $devicefull = print_drivedevice_full
($storecfg, $conf, $vmid, $device, $arch, $machine_type);
4153 eval { qemu_deviceadd
($vmid, $devicefull); };
4155 eval { qemu_drivedel
($vmid, $deviceid); };
4160 } elsif ($deviceid =~ m/^(net)(\d+)$/) {
4162 return undef if !qemu_netdevadd
($vmid, $conf, $arch, $device, $deviceid);
4164 my $machine_type = PVE
::QemuServer
::qemu_machine_pxe
($vmid, $conf);
4165 my $use_old_bios_files = undef;
4166 ($use_old_bios_files, $machine_type) = qemu_use_old_bios_files
($machine_type);
4168 my $netdevicefull = print_netdevice_full
($vmid, $conf, $device, $deviceid, undef, $use_old_bios_files, $arch, $machine_type);
4169 qemu_deviceadd
($vmid, $netdevicefull);
4171 qemu_deviceaddverify
($vmid, $deviceid);
4172 qemu_set_link_status
($vmid, $deviceid, !$device->{link_down
});
4175 eval { qemu_netdevdel
($vmid, $deviceid); };
4180 } elsif (!$q35 && $deviceid =~ m/^(pci\.)(\d+)$/) {
4183 my $pciaddr = print_pci_addr
($deviceid, undef, $arch, $machine_type);
4184 my $devicefull = "pci-bridge,id=pci.$bridgeid,chassis_nr=$bridgeid$pciaddr";
4186 qemu_deviceadd
($vmid, $devicefull);
4187 qemu_deviceaddverify
($vmid, $deviceid);
4190 die "can't hotplug device '$deviceid'\n";
4196 # fixme: this should raise exceptions on error!
4197 sub vm_deviceunplug
{
4198 my ($vmid, $conf, $deviceid) = @_;
4200 my $devices_list = vm_devices_list
($vmid);
4201 return 1 if !defined($devices_list->{$deviceid});
4203 die "can't unplug bootdisk" if $conf->{bootdisk
} && $conf->{bootdisk
} eq $deviceid;
4205 if ($deviceid eq 'tablet' || $deviceid eq 'keyboard') {
4207 qemu_devicedel
($vmid, $deviceid);
4209 } elsif ($deviceid =~ m/^usb\d+$/) {
4211 die "usb hotplug currently not reliable\n";
4212 # when unplugging usb devices this way,
4213 # there may be remaining usb controllers/hubs
4214 # so we disable it for now
4215 qemu_devicedel
($vmid, $deviceid);
4216 qemu_devicedelverify
($vmid, $deviceid);
4218 } elsif ($deviceid =~ m/^(virtio)(\d+)$/) {
4220 qemu_devicedel
($vmid, $deviceid);
4221 qemu_devicedelverify
($vmid, $deviceid);
4222 qemu_drivedel
($vmid, $deviceid);
4223 qemu_iothread_del
($conf, $vmid, $deviceid);
4225 } elsif ($deviceid =~ m/^(virtioscsi|scsihw)(\d+)$/) {
4227 qemu_devicedel
($vmid, $deviceid);
4228 qemu_devicedelverify
($vmid, $deviceid);
4229 qemu_iothread_del
($conf, $vmid, $deviceid);
4231 } elsif ($deviceid =~ m/^(scsi)(\d+)$/) {
4233 qemu_devicedel
($vmid, $deviceid);
4234 qemu_drivedel
($vmid, $deviceid);
4235 qemu_deletescsihw
($conf, $vmid, $deviceid);
4237 } elsif ($deviceid =~ m/^(net)(\d+)$/) {
4239 qemu_devicedel
($vmid, $deviceid);
4240 qemu_devicedelverify
($vmid, $deviceid);
4241 qemu_netdevdel
($vmid, $deviceid);
4244 die "can't unplug device '$deviceid'\n";
4250 sub qemu_deviceadd
{
4251 my ($vmid, $devicefull) = @_;
4253 $devicefull = "driver=".$devicefull;
4254 my %options = split(/[=,]/, $devicefull);
4256 vm_mon_cmd
($vmid, "device_add" , %options);
4259 sub qemu_devicedel
{
4260 my ($vmid, $deviceid) = @_;
4262 my $ret = vm_mon_cmd
($vmid, "device_del", id
=> $deviceid);
4265 sub qemu_iothread_add
{
4266 my($vmid, $deviceid, $device) = @_;
4268 if ($device->{iothread
}) {
4269 my $iothreads = vm_iothreads_list
($vmid);
4270 qemu_objectadd
($vmid, "iothread-$deviceid", "iothread") if !$iothreads->{"iothread-$deviceid"};
4274 sub qemu_iothread_del
{
4275 my($conf, $vmid, $deviceid) = @_;
4277 my $confid = $deviceid;
4278 if ($deviceid =~ m/^(?:virtioscsi|scsihw)(\d+)$/) {
4279 $confid = 'scsi' . $1;
4281 my $device = parse_drive
($confid, $conf->{$confid});
4282 if ($device->{iothread
}) {
4283 my $iothreads = vm_iothreads_list
($vmid);
4284 qemu_objectdel
($vmid, "iothread-$deviceid") if $iothreads->{"iothread-$deviceid"};
4288 sub qemu_objectadd
{
4289 my($vmid, $objectid, $qomtype) = @_;
4291 vm_mon_cmd
($vmid, "object-add", id
=> $objectid, "qom-type" => $qomtype);
4296 sub qemu_objectdel
{
4297 my($vmid, $objectid) = @_;
4299 vm_mon_cmd
($vmid, "object-del", id
=> $objectid);
4305 my ($storecfg, $vmid, $device) = @_;
4307 my $drive = print_drive_full
($storecfg, $vmid, $device);
4308 $drive =~ s/\\/\\\\/g;
4309 my $ret = vm_human_monitor_command
($vmid, "drive_add auto \"$drive\"");
4311 # If the command succeeds qemu prints: "OK
"
4312 return 1 if $ret =~ m/OK/s;
4314 die "adding drive failed
: $ret\n";
4318 my($vmid, $deviceid) = @_;
4320 my $ret = vm_human_monitor_command($vmid, "drive_del drive-
$deviceid");
4323 return 1 if $ret eq "";
4325 # NB: device not found errors mean the drive was auto-deleted and we ignore the error
4326 return 1 if $ret =~ m/Device \'.*?\' not found/s;
4328 die "deleting drive
$deviceid failed
: $ret\n";
4331 sub qemu_deviceaddverify {
4332 my ($vmid, $deviceid) = @_;
4334 for (my $i = 0; $i <= 5; $i++) {
4335 my $devices_list = vm_devices_list($vmid);
4336 return 1 if defined($devices_list->{$deviceid});
4340 die "error on hotplug device
'$deviceid'\n";
4344 sub qemu_devicedelverify {
4345 my ($vmid, $deviceid) = @_;
4347 # need to verify that the device is correctly removed as device_del
4348 # is async and empty return is not reliable
4350 for (my $i = 0; $i <= 5; $i++) {
4351 my $devices_list = vm_devices_list($vmid);
4352 return 1 if !defined($devices_list->{$deviceid});
4356 die "error on hot-unplugging device
'$deviceid'\n";
4359 sub qemu_findorcreatescsihw {
4360 my ($storecfg, $conf, $vmid, $device, $arch, $machine_type) = @_;
4362 my ($maxdev, $controller, $controller_prefix) = scsihw_infos($conf, $device);
4364 my $scsihwid="$controller_prefix$controller";
4365 my $devices_list = vm_devices_list($vmid);
4367 if(!defined($devices_list->{$scsihwid})) {
4368 vm_deviceplug($storecfg, $conf, $vmid, $scsihwid, $device, $arch, $machine_type);
4374 sub qemu_deletescsihw {
4375 my ($conf, $vmid, $opt) = @_;
4377 my $device = parse_drive($opt, $conf->{$opt});
4379 if ($conf->{scsihw} && ($conf->{scsihw} eq 'virtio-scsi-single')) {
4380 vm_deviceunplug($vmid, $conf, "virtioscsi
$device->{index}");
4384 my ($maxdev, $controller, $controller_prefix) = scsihw_infos($conf, $device);
4386 my $devices_list = vm_devices_list($vmid);
4387 foreach my $opt (keys %{$devices_list}) {
4388 if (PVE::QemuServer::is_valid_drivename($opt)) {
4389 my $drive = PVE::QemuServer::parse_drive($opt, $conf->{$opt});
4390 if($drive->{interface} eq 'scsi' && $drive->{index} < (($maxdev-1)*($controller+1))) {
4396 my $scsihwid="scsihw
$controller";
4398 vm_deviceunplug($vmid, $conf, $scsihwid);
4403 sub qemu_add_pci_bridge {
4404 my ($storecfg, $conf, $vmid, $device, $arch, $machine_type) = @_;
4410 print_pci_addr($device, $bridges, $arch, $machine_type);
4412 while (my ($k, $v) = each %$bridges) {
4415 return 1 if !defined($bridgeid) || $bridgeid < 1;
4417 my $bridge = "pci
.$bridgeid";
4418 my $devices_list = vm_devices_list($vmid);
4420 if (!defined($devices_list->{$bridge})) {
4421 vm_deviceplug($storecfg, $conf, $vmid, $bridge, $arch, $machine_type);
4427 sub qemu_set_link_status {
4428 my ($vmid, $device, $up) = @_;
4430 vm_mon_cmd($vmid, "set_link
", name => $device,
4431 up => $up ? JSON::true : JSON::false);
4434 sub qemu_netdevadd {
4435 my ($vmid, $conf, $arch, $device, $deviceid) = @_;
4437 my $netdev = print_netdev_full($vmid, $conf, $arch, $device, $deviceid, 1);
4438 my %options = split(/[=,]/, $netdev);
4440 vm_mon_cmd($vmid, "netdev_add
", %options);
4444 sub qemu_netdevdel {
4445 my ($vmid, $deviceid) = @_;
4447 vm_mon_cmd($vmid, "netdev_del
", id => $deviceid);
4450 sub qemu_usb_hotplug {
4451 my ($storecfg, $conf, $vmid, $deviceid, $device, $arch, $machine_type) = @_;
4455 # remove the old one first
4456 vm_deviceunplug($vmid, $conf, $deviceid);
4458 # check if xhci controller is necessary and available
4459 if ($device->{usb3}) {
4461 my $devicelist = vm_devices_list($vmid);
4463 if (!$devicelist->{xhci}) {
4464 my $pciaddr = print_pci_addr("xhci
", undef, $arch, $machine_type);
4465 qemu_deviceadd($vmid, "nec-usb-xhci
,id
=xhci
$pciaddr");
4468 my $d = parse_usb_device($device->{host});
4469 $d->{usb3} = $device->{usb3};
4472 vm_deviceplug($storecfg, $conf, $vmid, $deviceid, $d, $arch, $machine_type);
4475 sub qemu_cpu_hotplug {
4476 my ($vmid, $conf, $vcpus) = @_;
4478 my $machine_type = PVE::QemuServer::get_current_qemu_machine($vmid);
4481 $sockets = $conf->{smp} if $conf->{smp}; # old style - no longer iused
4482 $sockets = $conf->{sockets} if $conf->{sockets};
4483 my $cores = $conf->{cores} || 1;
4484 my $maxcpus = $sockets * $cores;
4486 $vcpus = $maxcpus if !$vcpus;
4488 die "you can
't add more vcpus than maxcpus\n"
4489 if $vcpus > $maxcpus;
4491 my $currentvcpus = $conf->{vcpus} || $maxcpus;
4493 if ($vcpus < $currentvcpus) {
4495 if (qemu_machine_feature_enabled ($machine_type, undef, 2, 7)) {
4497 for (my $i = $currentvcpus; $i > $vcpus; $i--) {
4498 qemu_devicedel($vmid, "cpu$i");
4500 my $currentrunningvcpus = undef;
4502 $currentrunningvcpus = vm_mon_cmd($vmid, "query-cpus");
4503 last if scalar(@{$currentrunningvcpus}) == $i-1;
4504 raise_param_exc({ vcpus => "error unplugging cpu$i" }) if $retry > 5;
4508 #update conf after each succesfull cpu unplug
4509 $conf->{vcpus} = scalar(@{$currentrunningvcpus});
4510 PVE::QemuConfig->write_config($vmid, $conf);
4513 die "cpu hot-unplugging requires qemu version 2.7 or higher\n";
4519 my $currentrunningvcpus = vm_mon_cmd($vmid, "query-cpus");
4520 die "vcpus in running vm does not match its configuration\n"
4521 if scalar(@{$currentrunningvcpus}) != $currentvcpus;
4523 if (qemu_machine_feature_enabled ($machine_type, undef, 2, 7)) {
4525 for (my $i = $currentvcpus+1; $i <= $vcpus; $i++) {
4526 my $cpustr = print_cpu_device($conf, $i);
4527 qemu_deviceadd($vmid, $cpustr);
4530 my $currentrunningvcpus = undef;
4532 $currentrunningvcpus = vm_mon_cmd($vmid, "query-cpus");
4533 last if scalar(@{$currentrunningvcpus}) == $i;
4534 raise_param_exc({ vcpus => "error hotplugging cpu$i" }) if $retry > 10;
4538 #update conf after each succesfull cpu hotplug
4539 $conf->{vcpus} = scalar(@{$currentrunningvcpus});
4540 PVE::QemuConfig->write_config($vmid, $conf);
4544 for (my $i = $currentvcpus; $i < $vcpus; $i++) {
4545 vm_mon_cmd($vmid, "cpu-add", id => int($i));
4550 sub qemu_block_set_io_throttle {
4551 my ($vmid, $deviceid,
4552 $bps, $bps_rd, $bps_wr, $iops, $iops_rd, $iops_wr,
4553 $bps_max, $bps_rd_max, $bps_wr_max, $iops_max, $iops_rd_max, $iops_wr_max,
4554 $bps_max_length, $bps_rd_max_length, $bps_wr_max_length,
4555 $iops_max_length, $iops_rd_max_length, $iops_wr_max_length) = @_;
4557 return if !check_running($vmid) ;
4559 vm_mon_cmd($vmid, "block_set_io_throttle", device => $deviceid,
4561 bps_rd => int($bps_rd),
4562 bps_wr => int($bps_wr),
4564 iops_rd => int($iops_rd),
4565 iops_wr => int($iops_wr),
4566 bps_max => int($bps_max),
4567 bps_rd_max => int($bps_rd_max),
4568 bps_wr_max => int($bps_wr_max),
4569 iops_max => int($iops_max),
4570 iops_rd_max => int($iops_rd_max),
4571 iops_wr_max => int($iops_wr_max),
4572 bps_max_length => int($bps_max_length),
4573 bps_rd_max_length => int($bps_rd_max_length),
4574 bps_wr_max_length => int($bps_wr_max_length),
4575 iops_max_length => int($iops_max_length),
4576 iops_rd_max_length => int($iops_rd_max_length),
4577 iops_wr_max_length => int($iops_wr_max_length),
4582 # old code, only used to shutdown old VM after update
4584 my ($fh, $timeout) = @_;
4586 my $sel = new IO::Select;
4593 while (scalar (@ready = $sel->can_read($timeout))) {
4595 if ($count = $fh->sysread($buf, 8192)) {
4596 if ($buf =~ /^(.*)\(qemu\) $/s) {
4603 if (!defined($count)) {
4610 die "monitor read timeout\n" if !scalar(@ready);
4615 sub qemu_block_resize {
4616 my ($vmid, $deviceid, $storecfg, $volid, $size) = @_;
4618 my $running = check_running($vmid);
4620 $size = 0 if !PVE::Storage::volume_resize($storecfg, $volid, $size, $running);
4622 return if !$running;
4624 vm_mon_cmd($vmid, "block_resize", device => $deviceid, size => int($size));
4628 sub qemu_volume_snapshot {
4629 my ($vmid, $deviceid, $storecfg, $volid, $snap) = @_;
4631 my $running = check_running($vmid);
4633 if ($running && do_snapshots_with_qemu($storecfg, $volid)){
4634 vm_mon_cmd($vmid, 'blockdev-snapshot-internal-sync
', device => $deviceid, name => $snap);
4636 PVE::Storage::volume_snapshot($storecfg, $volid, $snap);
4640 sub qemu_volume_snapshot_delete {
4641 my ($vmid, $deviceid, $storecfg, $volid, $snap) = @_;
4643 my $running = check_running($vmid);
4648 my $conf = PVE::QemuConfig->load_config($vmid);
4649 foreach_drive($conf, sub {
4650 my ($ds, $drive) = @_;
4651 $running = 1 if $drive->{file} eq $volid;
4655 if ($running && do_snapshots_with_qemu($storecfg, $volid)){
4656 vm_mon_cmd($vmid, 'blockdev-snapshot-delete-internal-sync
', device => $deviceid, name => $snap);
4658 PVE::Storage::volume_snapshot_delete($storecfg, $volid, $snap, $running);
4662 sub set_migration_caps {
4668 "auto-converge" => 1,
4670 "x-rdma-pin-all" => 0,
4675 my $supported_capabilities = vm_mon_cmd_nocheck($vmid, "query-migrate-capabilities");
4677 for my $supported_capability (@$supported_capabilities) {
4679 capability => $supported_capability->{capability},
4680 state => $enabled_cap->{$supported_capability->{capability}} ? JSON::true : JSON::false,
4684 vm_mon_cmd_nocheck($vmid, "migrate-set-capabilities", capabilities => $cap_ref);
4687 my $fast_plug_option = {
4695 'vmstatestorage
' => 1,
4699 # hotplug changes in [PENDING]
4700 # $selection hash can be used to only apply specified options, for
4701 # example: { cores => 1 } (only apply changed 'cores
')
4702 # $errors ref is used to return error messages
4703 sub vmconfig_hotplug_pending {
4704 my ($vmid, $conf, $storecfg, $selection, $errors) = @_;
4706 my $defaults = load_defaults();
4707 my ($arch, $machine_type) = get_basic_machine_info($conf, undef);
4709 # commit values which do not have any impact on running VM first
4710 # Note: those option cannot raise errors, we we do not care about
4711 # $selection and always apply them.
4713 my $add_error = sub {
4714 my ($opt, $msg) = @_;
4715 $errors->{$opt} = "hotplug problem - $msg";
4719 foreach my $opt (keys %{$conf->{pending}}) { # add/change
4720 if ($fast_plug_option->{$opt}) {
4721 $conf->{$opt} = $conf->{pending}->{$opt};
4722 delete $conf->{pending}->{$opt};
4728 PVE::QemuConfig->write_config($vmid, $conf);
4729 $conf = PVE::QemuConfig->load_config($vmid); # update/reload
4732 my $hotplug_features = parse_hotplug_features(defined($conf->{hotplug}) ? $conf->{hotplug} : '1');
4734 my $pending_delete_hash = split_flagged_list($conf->{pending}->{delete});
4735 while (my ($opt, $force) = each %$pending_delete_hash) {
4736 next if $selection && !$selection->{$opt};
4738 if ($opt eq 'hotplug
') {
4739 die "skip\n" if ($conf->{hotplug} =~ /memory/);
4740 } elsif ($opt eq 'tablet
') {
4741 die "skip\n" if !$hotplug_features->{usb};
4742 if ($defaults->{tablet}) {
4743 vm_deviceplug($storecfg, $conf, $vmid, 'tablet
', $arch, $machine_type);
4744 vm_deviceplug($storecfg, $conf, $vmid, 'keyboard
', $arch, $machine_type)
4745 if $arch eq 'aarch64
';
4747 vm_deviceunplug($vmid, $conf, 'tablet
');
4748 vm_deviceunplug($vmid, $conf, 'keyboard
') if $arch eq 'aarch64
';
4750 } elsif ($opt =~ m/^usb\d+/) {
4752 # since we cannot reliably hot unplug usb devices
4753 # we are disabling it
4754 die "skip\n" if !$hotplug_features->{usb} || $conf->{$opt} =~ m/spice/i;
4755 vm_deviceunplug($vmid, $conf, $opt);
4756 } elsif ($opt eq 'vcpus
') {
4757 die "skip\n" if !$hotplug_features->{cpu};
4758 qemu_cpu_hotplug($vmid, $conf, undef);
4759 } elsif ($opt eq 'balloon
') {
4760 # enable balloon device is not hotpluggable
4761 die "skip\n" if defined($conf->{balloon}) && $conf->{balloon} == 0;
4762 # here we reset the ballooning value to memory
4763 my $balloon = $conf->{memory} || $defaults->{memory};
4764 vm_mon_cmd($vmid, "balloon", value => $balloon*1024*1024);
4765 } elsif ($fast_plug_option->{$opt}) {
4767 } elsif ($opt =~ m/^net(\d+)$/) {
4768 die "skip\n" if !$hotplug_features->{network};
4769 vm_deviceunplug($vmid, $conf, $opt);
4770 } elsif (is_valid_drivename($opt)) {
4771 die "skip\n" if !$hotplug_features->{disk} || $opt =~ m/(ide|sata)(\d+)/;
4772 vm_deviceunplug($vmid, $conf, $opt);
4773 vmconfig_delete_or_detach_drive($vmid, $storecfg, $conf, $opt, $force);
4774 } elsif ($opt =~ m/^memory$/) {
4775 die "skip\n" if !$hotplug_features->{memory};
4776 PVE::QemuServer::Memory::qemu_memory_hotplug($vmid, $conf, $defaults, $opt);
4777 } elsif ($opt eq 'cpuunits
') {
4778 cgroups_write("cpu", $vmid, "cpu.shares", $defaults->{cpuunits});
4779 } elsif ($opt eq 'cpulimit
') {
4780 cgroups_write("cpu", $vmid, "cpu.cfs_quota_us", -1);
4786 &$add_error($opt, $err) if $err ne "skip\n";
4788 # save new config if hotplug was successful
4789 delete $conf->{$opt};
4790 vmconfig_undelete_pending_option($conf, $opt);
4791 PVE::QemuConfig->write_config($vmid, $conf);
4792 $conf = PVE::QemuConfig->load_config($vmid); # update/reload
4796 my $apply_pending_cloudinit;
4797 $apply_pending_cloudinit = sub {
4798 my ($key, $value) = @_;
4799 $apply_pending_cloudinit = sub {}; # once is enough
4801 my @cloudinit_opts = keys %$confdesc_cloudinit;
4802 foreach my $opt (keys %{$conf->{pending}}) {
4803 next if !grep { $_ eq $opt } @cloudinit_opts;
4804 $conf->{$opt} = delete $conf->{pending}->{$opt};
4807 my $new_conf = { %$conf };
4808 $new_conf->{$key} = $value;
4809 PVE::QemuServer::Cloudinit::generate_cloudinitconfig($new_conf, $vmid);
4812 foreach my $opt (keys %{$conf->{pending}}) {
4813 next if $selection && !$selection->{$opt};
4814 my $value = $conf->{pending}->{$opt};
4816 if ($opt eq 'hotplug
') {
4817 die "skip\n" if ($value =~ /memory/) || ($value !~ /memory/ && $conf->{hotplug} =~ /memory/);
4818 } elsif ($opt eq 'tablet
') {
4819 die "skip\n" if !$hotplug_features->{usb};
4821 vm_deviceplug($storecfg, $conf, $vmid, 'tablet
', $arch, $machine_type);
4822 vm_deviceplug($storecfg, $conf, $vmid, 'keyboard
', $arch, $machine_type)
4823 if $arch eq 'aarch64
';
4824 } elsif ($value == 0) {
4825 vm_deviceunplug($vmid, $conf, 'tablet
');
4826 vm_deviceunplug($vmid, $conf, 'keyboard
') if $arch eq 'aarch64
';
4828 } elsif ($opt =~ m/^usb\d+$/) {
4830 # since we cannot reliably hot unplug usb devices
4831 # we are disabling it
4832 die "skip\n" if !$hotplug_features->{usb} || $value =~ m/spice/i;
4833 my $d = eval { PVE::JSONSchema::parse_property_string($usbdesc->{format}, $value) };
4834 die "skip\n" if !$d;
4835 qemu_usb_hotplug($storecfg, $conf, $vmid, $opt, $d, $arch, $machine_type);
4836 } elsif ($opt eq 'vcpus
') {
4837 die "skip\n" if !$hotplug_features->{cpu};
4838 qemu_cpu_hotplug($vmid, $conf, $value);
4839 } elsif ($opt eq 'balloon
') {
4840 # enable/disable balloning device is not hotpluggable
4841 my $old_balloon_enabled = !!(!defined($conf->{balloon}) || $conf->{balloon});
4842 my $new_balloon_enabled = !!(!defined($conf->{pending}->{balloon}) || $conf->{pending}->{balloon});
4843 die "skip\n" if $old_balloon_enabled != $new_balloon_enabled;
4845 # allow manual ballooning if shares is set to zero
4846 if ((defined($conf->{shares}) && ($conf->{shares} == 0))) {
4847 my $balloon = $conf->{pending}->{balloon} || $conf->{memory} || $defaults->{memory};
4848 vm_mon_cmd($vmid, "balloon", value => $balloon*1024*1024);
4850 } elsif ($opt =~ m/^net(\d+)$/) {
4851 # some changes can be done without hotplug
4852 vmconfig_update_net($storecfg, $conf, $hotplug_features->{network},
4853 $vmid, $opt, $value, $arch, $machine_type);
4854 } elsif (is_valid_drivename($opt)) {
4855 # some changes can be done without hotplug
4856 my $drive = parse_drive($opt, $value);
4857 if (drive_is_cloudinit($drive)) {
4858 &$apply_pending_cloudinit($opt, $value);
4860 vmconfig_update_disk($storecfg, $conf, $hotplug_features->{disk},
4861 $vmid, $opt, $value, 1, $arch, $machine_type);
4862 } elsif ($opt =~ m/^memory$/) { #dimms
4863 die "skip\n" if !$hotplug_features->{memory};
4864 $value = PVE::QemuServer::Memory::qemu_memory_hotplug($vmid, $conf, $defaults, $opt, $value);
4865 } elsif ($opt eq 'cpuunits
') {
4866 cgroups_write("cpu", $vmid, "cpu.shares", $conf->{pending}->{$opt});
4867 } elsif ($opt eq 'cpulimit
') {
4868 my $cpulimit = $conf->{pending}->{$opt} == 0 ? -1 : int($conf->{pending}->{$opt} * 100000);
4869 cgroups_write("cpu", $vmid, "cpu.cfs_quota_us", $cpulimit);
4871 die "skip\n"; # skip non-hot-pluggable options
4875 &$add_error($opt, $err) if $err ne "skip\n";
4877 # save new config if hotplug was successful
4878 $conf->{$opt} = $value;
4879 delete $conf->{pending}->{$opt};
4880 PVE::QemuConfig->write_config($vmid, $conf);
4881 $conf = PVE::QemuConfig->load_config($vmid); # update/reload
4886 sub try_deallocate_drive {
4887 my ($storecfg, $vmid, $conf, $key, $drive, $rpcenv, $authuser, $force) = @_;
4889 if (($force || $key =~ /^unused/) && !drive_is_cdrom($drive, 1)) {
4890 my $volid = $drive->{file};
4891 if (vm_is_volid_owner($storecfg, $vmid, $volid)) {
4892 my $sid = PVE::Storage::parse_volume_id($volid);
4893 $rpcenv->check($authuser, "/storage/$sid", ['Datastore
.AllocateSpace
']);
4895 # check if the disk is really unused
4896 die "unable to delete '$volid' - volume is still in use (snapshot?)\n"
4897 if is_volume_in_use($storecfg, $conf, $key, $volid);
4898 PVE::Storage::vdisk_free($storecfg, $volid);
4901 # If vm is not owner of this disk remove from config
4909 sub vmconfig_delete_or_detach_drive {
4910 my ($vmid, $storecfg, $conf, $opt, $force) = @_;
4912 my $drive = parse_drive($opt, $conf->{$opt});
4914 my $rpcenv = PVE::RPCEnvironment::get();
4915 my $authuser = $rpcenv->get_user();
4918 $rpcenv->check_vm_perm($authuser, $vmid, undef, ['VM
.Config
.Disk
']);
4919 try_deallocate_drive($storecfg, $vmid, $conf, $opt, $drive, $rpcenv, $authuser, $force);
4921 vmconfig_register_unused_drive($storecfg, $vmid, $conf, $drive);
4925 sub vmconfig_apply_pending {
4926 my ($vmid, $conf, $storecfg) = @_;
4930 my $pending_delete_hash = split_flagged_list($conf->{pending}->{delete});
4931 while (my ($opt, $force) = each %$pending_delete_hash) {
4932 die "internal error" if $opt =~ m/^unused/;
4933 $conf = PVE::QemuConfig->load_config($vmid); # update/reload
4934 if (!defined($conf->{$opt})) {
4935 vmconfig_undelete_pending_option($conf, $opt);
4936 PVE::QemuConfig->write_config($vmid, $conf);
4937 } elsif (is_valid_drivename($opt)) {
4938 vmconfig_delete_or_detach_drive($vmid, $storecfg, $conf, $opt, $force);
4939 vmconfig_undelete_pending_option($conf, $opt);
4940 delete $conf->{$opt};
4941 PVE::QemuConfig->write_config($vmid, $conf);
4943 vmconfig_undelete_pending_option($conf, $opt);
4944 delete $conf->{$opt};
4945 PVE::QemuConfig->write_config($vmid, $conf);
4949 $conf = PVE::QemuConfig->load_config($vmid); # update/reload
4951 foreach my $opt (keys %{$conf->{pending}}) { # add/change
4952 $conf = PVE::QemuConfig->load_config($vmid); # update/reload
4954 if (defined($conf->{$opt}) && ($conf->{$opt} eq $conf->{pending}->{$opt})) {
4955 # skip if nothing changed
4956 } elsif (is_valid_drivename($opt)) {
4957 vmconfig_register_unused_drive($storecfg, $vmid, $conf, parse_drive($opt, $conf->{$opt}))
4958 if defined($conf->{$opt});
4959 $conf->{$opt} = $conf->{pending}->{$opt};
4961 $conf->{$opt} = $conf->{pending}->{$opt};
4964 delete $conf->{pending}->{$opt};
4965 PVE::QemuConfig->write_config($vmid, $conf);
4969 my $safe_num_ne = sub {
4972 return 0 if !defined($a) && !defined($b);
4973 return 1 if !defined($a);
4974 return 1 if !defined($b);
4979 my $safe_string_ne = sub {
4982 return 0 if !defined($a) && !defined($b);
4983 return 1 if !defined($a);
4984 return 1 if !defined($b);
4989 sub vmconfig_update_net {
4990 my ($storecfg, $conf, $hotplug, $vmid, $opt, $value, $arch, $machine_type) = @_;
4992 my $newnet = parse_net($value);
4994 if ($conf->{$opt}) {
4995 my $oldnet = parse_net($conf->{$opt});
4997 if (&$safe_string_ne($oldnet->{model}, $newnet->{model}) ||
4998 &$safe_string_ne($oldnet->{macaddr}, $newnet->{macaddr}) ||
4999 &$safe_num_ne($oldnet->{queues}, $newnet->{queues}) ||
5000 !($newnet->{bridge} && $oldnet->{bridge})) { # bridge/nat mode change
5002 # for non online change, we try to hot-unplug
5003 die "skip\n" if !$hotplug;
5004 vm_deviceunplug($vmid, $conf, $opt);
5007 die "internal error" if $opt !~ m/net(\d+)/;
5008 my $iface = "tap${vmid}i$1";
5010 if (&$safe_string_ne($oldnet->{bridge}, $newnet->{bridge}) ||
5011 &$safe_num_ne($oldnet->{tag}, $newnet->{tag}) ||
5012 &$safe_string_ne($oldnet->{trunks}, $newnet->{trunks}) ||
5013 &$safe_num_ne($oldnet->{firewall}, $newnet->{firewall})) {
5014 PVE::Network::tap_unplug($iface);
5015 PVE::Network::tap_plug($iface, $newnet->{bridge}, $newnet->{tag}, $newnet->{firewall}, $newnet->{trunks}, $newnet->{rate});
5016 } elsif (&$safe_num_ne($oldnet->{rate}, $newnet->{rate})) {
5017 # Rate can be applied on its own but any change above needs to
5018 # include the rate in tap_plug since OVS resets everything.
5019 PVE::Network::tap_rate_limit($iface, $newnet->{rate});
5022 if (&$safe_string_ne($oldnet->{link_down}, $newnet->{link_down})) {
5023 qemu_set_link_status($vmid, $opt, !$newnet->{link_down});
5031 vm_deviceplug($storecfg, $conf, $vmid, $opt, $newnet, $arch, $machine_type);
5037 sub vmconfig_update_disk {
5038 my ($storecfg, $conf, $hotplug, $vmid, $opt, $value, $force, $arch, $machine_type) = @_;
5040 # fixme: do we need force?
5042 my $drive = parse_drive($opt, $value);
5044 if ($conf->{$opt}) {
5046 if (my $old_drive = parse_drive($opt, $conf->{$opt})) {
5048 my $media = $drive->{media} || 'disk
';
5049 my $oldmedia = $old_drive->{media} || 'disk
';
5050 die "unable to change media type\n" if $media ne $oldmedia;
5052 if (!drive_is_cdrom($old_drive)) {
5054 if ($drive->{file} ne $old_drive->{file}) {
5056 die "skip\n" if !$hotplug;
5058 # unplug and register as unused
5059 vm_deviceunplug($vmid, $conf, $opt);
5060 vmconfig_register_unused_drive($storecfg, $vmid, $conf, $old_drive)
5063 # update existing disk
5065 # skip non hotpluggable value
5066 if (&$safe_string_ne($drive->{discard}, $old_drive->{discard}) ||
5067 &$safe_string_ne($drive->{iothread}, $old_drive->{iothread}) ||
5068 &$safe_string_ne($drive->{queues}, $old_drive->{queues}) ||
5069 &$safe_string_ne($drive->{cache}, $old_drive->{cache})) {
5074 if (&$safe_num_ne($drive->{mbps}, $old_drive->{mbps}) ||
5075 &$safe_num_ne($drive->{mbps_rd}, $old_drive->{mbps_rd}) ||
5076 &$safe_num_ne($drive->{mbps_wr}, $old_drive->{mbps_wr}) ||
5077 &$safe_num_ne($drive->{iops}, $old_drive->{iops}) ||
5078 &$safe_num_ne($drive->{iops_rd}, $old_drive->{iops_rd}) ||
5079 &$safe_num_ne($drive->{iops_wr}, $old_drive->{iops_wr}) ||
5080 &$safe_num_ne($drive->{mbps_max}, $old_drive->{mbps_max}) ||
5081 &$safe_num_ne($drive->{mbps_rd_max}, $old_drive->{mbps_rd_max}) ||
5082 &$safe_num_ne($drive->{mbps_wr_max}, $old_drive->{mbps_wr_max}) ||
5083 &$safe_num_ne($drive->{iops_max}, $old_drive->{iops_max}) ||
5084 &$safe_num_ne($drive->{iops_rd_max}, $old_drive->{iops_rd_max}) ||
5085 &$safe_num_ne($drive->{iops_wr_max}, $old_drive->{iops_wr_max}) ||
5086 &$safe_num_ne($drive->{bps_max_length}, $old_drive->{bps_max_length}) ||
5087 &$safe_num_ne($drive->{bps_rd_max_length}, $old_drive->{bps_rd_max_length}) ||
5088 &$safe_num_ne($drive->{bps_wr_max_length}, $old_drive->{bps_wr_max_length}) ||
5089 &$safe_num_ne($drive->{iops_max_length}, $old_drive->{iops_max_length}) ||
5090 &$safe_num_ne($drive->{iops_rd_max_length}, $old_drive->{iops_rd_max_length}) ||
5091 &$safe_num_ne($drive->{iops_wr_max_length}, $old_drive->{iops_wr_max_length})) {
5093 qemu_block_set_io_throttle($vmid,"drive-$opt",
5094 ($drive->{mbps} || 0)*1024*1024,
5095 ($drive->{mbps_rd} || 0)*1024*1024,
5096 ($drive->{mbps_wr} || 0)*1024*1024,
5097 $drive->{iops} || 0,
5098 $drive->{iops_rd} || 0,
5099 $drive->{iops_wr} || 0,
5100 ($drive->{mbps_max} || 0)*1024*1024,
5101 ($drive->{mbps_rd_max} || 0)*1024*1024,
5102 ($drive->{mbps_wr_max} || 0)*1024*1024,
5103 $drive->{iops_max} || 0,
5104 $drive->{iops_rd_max} || 0,
5105 $drive->{iops_wr_max} || 0,
5106 $drive->{bps_max_length} || 1,
5107 $drive->{bps_rd_max_length} || 1,
5108 $drive->{bps_wr_max_length} || 1,
5109 $drive->{iops_max_length} || 1,
5110 $drive->{iops_rd_max_length} || 1,
5111 $drive->{iops_wr_max_length} || 1);
5120 if ($drive->{file} eq 'none
') {
5121 vm_mon_cmd($vmid, "eject",force => JSON::true,device => "drive-$opt");
5122 if (drive_is_cloudinit($old_drive)) {
5123 vmconfig_register_unused_drive($storecfg, $vmid, $conf, $old_drive);
5126 my $path = get_iso_path($storecfg, $vmid, $drive->{file});
5127 vm_mon_cmd($vmid, "eject", force => JSON::true,device => "drive-$opt"); # force eject if locked
5128 vm_mon_cmd($vmid, "change", device => "drive-$opt",target => "$path") if $path;
5136 die "skip\n" if !$hotplug || $opt =~ m/(ide|sata)(\d+)/;
5138 PVE::Storage::activate_volumes($storecfg, [$drive->{file}]) if $drive->{file} !~ m|^/dev/.+|;
5139 vm_deviceplug($storecfg, $conf, $vmid, $opt, $drive, $arch, $machine_type);
5143 my ($storecfg, $vmid, $statefile, $skiplock, $migratedfrom, $paused,
5144 $forcemachine, $spice_ticket, $migration_network, $migration_type, $targetstorage) = @_;
5146 PVE::QemuConfig->lock_config($vmid, sub {
5147 my $conf = PVE::QemuConfig->load_config($vmid, $migratedfrom);
5149 die "you can't start a vm
if it
's a template\n" if PVE::QemuConfig->is_template($conf);
5151 PVE::QemuConfig->check_lock($conf) if !$skiplock;
5153 die "VM $vmid already running\n" if check_running($vmid, undef, $migratedfrom);
5155 if (!$statefile && scalar(keys %{$conf->{pending}})) {
5156 vmconfig_apply_pending($vmid, $conf, $storecfg);
5157 $conf = PVE::QemuConfig->load_config($vmid); # update/reload
5160 PVE::QemuServer::Cloudinit::generate_cloudinitconfig($conf, $vmid);
5162 my $defaults = load_defaults();
5164 # set environment variable useful inside network script
5165 $ENV{PVE_MIGRATED_FROM} = $migratedfrom if $migratedfrom;
5167 my $local_volumes = {};
5169 if ($targetstorage) {
5170 foreach_drive($conf, sub {
5171 my ($ds, $drive) = @_;
5173 return if drive_is_cdrom($drive);
5175 my $volid = $drive->{file};
5179 my ($storeid, $volname) = PVE::Storage::parse_volume_id($volid);
5181 my $scfg = PVE::Storage::storage_config($storecfg, $storeid);
5182 return if $scfg->{shared};
5183 $local_volumes->{$ds} = [$volid, $storeid, $volname];
5188 foreach my $opt (sort keys %$local_volumes) {
5190 my ($volid, $storeid, $volname) = @{$local_volumes->{$opt}};
5191 my $drive = parse_drive($opt, $conf->{$opt});
5193 #if remote storage is specified, use default format
5194 if ($targetstorage && $targetstorage ne "1") {
5195 $storeid = $targetstorage;
5196 my ($defFormat, $validFormats) = PVE::Storage::storage_default_format($storecfg, $storeid);
5197 $format = $defFormat;
5199 #else we use same format than original
5200 my $scfg = PVE::Storage::storage_config($storecfg, $storeid);
5201 $format = qemu_img_format($scfg, $volid);
5204 my $newvolid = PVE::Storage::vdisk_alloc($storecfg, $storeid, $vmid, $format, undef, ($drive->{size}/1024));
5205 my $newdrive = $drive;
5206 $newdrive->{format} = $format;
5207 $newdrive->{file} = $newvolid;
5208 my $drivestr = PVE::QemuServer::print_drive($vmid, $newdrive);
5209 $local_volumes->{$opt} = $drivestr;
5210 #pass drive to conf for command line
5211 $conf->{$opt} = $drivestr;
5215 PVE::GuestHelpers::exec_hookscript($conf, $vmid, 'pre-start
', 1);
5217 my ($cmd, $vollist, $spice_port) = config_to_command($storecfg, $vmid, $conf, $defaults, $forcemachine);
5219 my $migrate_port = 0;
5222 if ($statefile eq 'tcp
') {
5223 my $localip = "localhost";
5224 my $datacenterconf = PVE::Cluster::cfs_read_file('datacenter
.cfg
');
5225 my $nodename = PVE::INotify::nodename();
5227 if (!defined($migration_type)) {
5228 if (defined($datacenterconf->{migration}->{type})) {
5229 $migration_type = $datacenterconf->{migration}->{type};
5231 $migration_type = 'secure
';
5235 if ($migration_type eq 'insecure
') {
5236 my $migrate_network_addr = PVE::Cluster::get_local_migration_ip($migration_network);
5237 if ($migrate_network_addr) {
5238 $localip = $migrate_network_addr;
5240 $localip = PVE::Cluster::remote_node_ip($nodename, 1);
5243 $localip = "[$localip]" if Net::IP::ip_is_ipv6($localip);
5246 my $pfamily = PVE::Tools::get_host_address_family($nodename);
5247 $migrate_port = PVE::Tools::next_migrate_port($pfamily);
5248 $migrate_uri = "tcp:${localip}:${migrate_port}";
5249 push @$cmd, '-incoming
', $migrate_uri;
5252 } elsif ($statefile eq 'unix
') {
5253 # should be default for secure migrations as a ssh TCP forward
5254 # tunnel is not deterministic reliable ready and fails regurarly
5255 # to set up in time, so use UNIX socket forwards
5256 my $socket_addr = "/run/qemu-server/$vmid.migrate";
5257 unlink $socket_addr;
5259 $migrate_uri = "unix:$socket_addr";
5261 push @$cmd, '-incoming
', $migrate_uri;
5265 push @$cmd, '-loadstate
', $statefile;
5272 for (my $i = 0; $i < $MAX_HOSTPCI_DEVICES; $i++) {
5273 my $d = parse_hostpci($conf->{"hostpci$i"});
5275 my $pcidevices = $d->{pciid};
5276 foreach my $pcidevice (@$pcidevices) {
5277 my $pciid = $pcidevice->{id};
5279 my $info = PVE::SysFSTools::pci_device_info("0000:$pciid");
5280 die "IOMMU not present\n" if !PVE::SysFSTools::check_iommu_support();
5281 die "no pci device info for device '$pciid'\n" if !$info;
5284 my $uuid = PVE::SysFSTools::generate_mdev_uuid($vmid, $i);
5285 PVE::SysFSTools::pci_create_mdev_device($pciid, $uuid, $d->{mdev});
5287 die "can't unbind
/bind pci group to vfio
'$pciid'\n"
5288 if !PVE::SysFSTools::pci_dev_group_bind_to_vfio($pciid);
5289 die "can
't reset pci device '$pciid'\n"
5290 if $info->{has_fl_reset} and !PVE::SysFSTools::pci_dev_reset($info);
5295 PVE::Storage::activate_volumes($storecfg, $vollist);
5297 if (-d "/sys/fs/cgroup/systemd/qemu.slice/$vmid.scope") {
5299 run_command(['/bin/systemctl
', 'stop
', "$vmid.scope"],
5300 outfunc => sub {}, errfunc => sub {});
5304 my $cpuunits = defined($conf->{cpuunits}) ? $conf->{cpuunits}
5305 : $defaults->{cpuunits};
5307 my $start_timeout = $conf->{hugepages} ? 300 : 30;
5308 my %run_params = (timeout => $statefile ? undef : $start_timeout, umask => 0077);
5311 Slice => 'qemu
.slice
',
5313 CPUShares => $cpuunits
5316 if (my $cpulimit = $conf->{cpulimit}) {
5317 $properties{CPUQuota} = int($cpulimit * 100);
5319 $properties{timeout} = 10 if $statefile; # setting up the scope shoul be quick
5321 my $run_qemu = sub {
5322 PVE::Tools::run_fork sub {
5323 PVE::Systemd::enter_systemd_scope($vmid, "Proxmox VE VM $vmid", %properties);
5324 run_command($cmd, %run_params);
5328 if ($conf->{hugepages}) {
5331 my $hugepages_topology = PVE::QemuServer::Memory::hugepages_topology($conf);
5332 my $hugepages_host_topology = PVE::QemuServer::Memory::hugepages_host_topology();
5334 PVE::QemuServer::Memory::hugepages_mount();
5335 PVE::QemuServer::Memory::hugepages_allocate($hugepages_topology, $hugepages_host_topology);
5337 eval { $run_qemu->() };
5339 PVE::QemuServer::Memory::hugepages_reset($hugepages_host_topology);
5343 PVE::QemuServer::Memory::hugepages_pre_deallocate($hugepages_topology);
5345 eval { PVE::QemuServer::Memory::hugepages_update_locked($code); };
5348 eval { $run_qemu->() };
5352 # deactivate volumes if start fails
5353 eval { PVE::Storage::deactivate_volumes($storecfg, $vollist); };
5354 die "start failed: $err";
5357 print "migration listens on $migrate_uri\n" if $migrate_uri;
5359 if ($statefile && $statefile ne 'tcp
' && $statefile ne 'unix
') {
5360 eval { vm_mon_cmd_nocheck($vmid, "cont"); };
5364 #start nbd server for storage migration
5365 if ($targetstorage) {
5366 my $nodename = PVE::INotify::nodename();
5367 my $migrate_network_addr = PVE::Cluster::get_local_migration_ip($migration_network);
5368 my $localip = $migrate_network_addr ? $migrate_network_addr : PVE::Cluster::remote_node_ip($nodename, 1);
5369 my $pfamily = PVE::Tools::get_host_address_family($nodename);
5370 $migrate_port = PVE::Tools::next_migrate_port($pfamily);
5372 vm_mon_cmd_nocheck($vmid, "nbd-server-start", addr => { type => 'inet
', data => { host => "${localip}", port => "${migrate_port}" } } );
5374 $localip = "[$localip]" if Net::IP::ip_is_ipv6($localip);
5376 foreach my $opt (sort keys %$local_volumes) {
5377 my $volid = $local_volumes->{$opt};
5378 vm_mon_cmd_nocheck($vmid, "nbd-server-add", device => "drive-$opt", writable => JSON::true );
5379 my $migrate_storage_uri = "nbd:${localip}:${migrate_port}:exportname=drive-$opt";
5380 print "storage migration listens on $migrate_storage_uri volume:$volid\n";
5384 if ($migratedfrom) {
5386 set_migration_caps($vmid);
5391 print "spice listens on port $spice_port\n";
5392 if ($spice_ticket) {
5393 vm_mon_cmd_nocheck($vmid, "set_password", protocol => 'spice
', password => $spice_ticket);
5394 vm_mon_cmd_nocheck($vmid, "expire_password", protocol => 'spice
', time => "+30");
5399 vm_mon_cmd_nocheck($vmid, "balloon", value => $conf->{balloon}*1024*1024)
5400 if !$statefile && $conf->{balloon};
5402 foreach my $opt (keys %$conf) {
5403 next if $opt !~ m/^net\d+$/;
5404 my $nicconf = parse_net($conf->{$opt});
5405 qemu_set_link_status($vmid, $opt, 0) if $nicconf->{link_down};
5409 vm_mon_cmd_nocheck($vmid, 'qom-set
',
5410 path => "machine/peripheral/balloon0",
5411 property => "guest-stats-polling-interval",
5412 value => 2) if (!defined($conf->{balloon}) || $conf->{balloon});
5414 PVE::GuestHelpers::exec_hookscript($conf, $vmid, 'post-start
');
5419 my ($vmid, $execute, %params) = @_;
5421 my $cmd = { execute => $execute, arguments => \%params };
5422 vm_qmp_command($vmid, $cmd);
5425 sub vm_mon_cmd_nocheck {
5426 my ($vmid, $execute, %params) = @_;
5428 my $cmd = { execute => $execute, arguments => \%params };
5429 vm_qmp_command($vmid, $cmd, 1);
5432 sub vm_qmp_command {
5433 my ($vmid, $cmd, $nocheck) = @_;
5438 if ($cmd->{arguments} && $cmd->{arguments}->{timeout}) {
5439 $timeout = $cmd->{arguments}->{timeout};
5440 delete $cmd->{arguments}->{timeout};
5444 die "VM $vmid not running\n" if !check_running($vmid, $nocheck);
5445 my $sname = qmp_socket($vmid);
5446 if (-e $sname) { # test if VM is reasonambe new and supports qmp/qga
5447 my $qmpclient = PVE::QMPClient->new();
5449 $res = $qmpclient->cmd($vmid, $cmd, $timeout);
5451 die "unable to open monitor socket\n";
5455 syslog("err", "VM $vmid qmp command failed - $err");
5462 sub vm_human_monitor_command {
5463 my ($vmid, $cmdline) = @_;
5468 execute => 'human-monitor-command
',
5469 arguments => { 'command-line
' => $cmdline},
5472 return vm_qmp_command($vmid, $cmd);
5475 sub vm_commandline {
5476 my ($storecfg, $vmid, $snapname) = @_;
5478 my $conf = PVE::QemuConfig->load_config($vmid);
5481 my $snapshot = $conf->{snapshots}->{$snapname};
5482 die "snapshot '$snapname' does not exist\n" if !defined($snapshot);
5484 $snapshot->{digest} = $conf->{digest}; # keep file digest for API
5489 my $defaults = load_defaults();
5491 my $cmd = config_to_command($storecfg, $vmid, $conf, $defaults);
5493 return PVE::Tools::cmd2string($cmd);
5497 my ($vmid, $skiplock) = @_;
5499 PVE::QemuConfig->lock_config($vmid, sub {
5501 my $conf = PVE::QemuConfig->load_config($vmid);
5503 PVE::QemuConfig->check_lock($conf) if !$skiplock;
5505 vm_mon_cmd($vmid, "system_reset");
5509 sub get_vm_volumes {
5513 foreach_volid($conf, sub {
5514 my ($volid, $attr) = @_;
5516 return if $volid =~ m|^/|;
5518 my ($sid, $volname) = PVE::Storage::parse_volume_id($volid, 1);
5521 push @$vollist, $volid;
5527 sub vm_stop_cleanup {
5528 my ($storecfg, $vmid, $conf, $keepActive, $apply_pending_changes) = @_;
5533 my $vollist = get_vm_volumes($conf);
5534 PVE::Storage::deactivate_volumes($storecfg, $vollist);
5537 foreach my $ext (qw(mon qmp pid vnc qga)) {
5538 unlink "/var/run/qemu-server/${vmid}.$ext";
5541 if ($conf->{ivshmem
}) {
5542 my $ivshmem = PVE
::JSONSchema
::parse_property_string
($ivshmem_fmt, $conf->{ivshmem
});
5543 # just delete it for now, VMs which have this already open do not
5544 # are affected, but new VMs will get a separated one. If this
5545 # becomes an issue we either add some sort of ref-counting or just
5546 # add a "don't delete on stop" flag to the ivshmem format.
5547 unlink '/dev/shm/pve-shm-' . ($ivshmem->{name
} // $vmid);
5550 foreach my $key (keys %$conf) {
5551 next if $key !~ m/^hostpci(\d+)$/;
5552 my $hostpciindex = $1;
5553 my $d = parse_hostpci
($conf->{$key});
5554 my $uuid = PVE
::SysFSTools
::generate_mdev_uuid
($vmid, $hostpciindex);
5556 foreach my $pci (@{$d->{pciid
}}) {
5557 my $pciid = $pci->{id
};
5558 PVE
::SysFSTools
::pci_cleanup_mdev_device
($pciid, $uuid);
5562 vmconfig_apply_pending
($vmid, $conf, $storecfg) if $apply_pending_changes;
5564 warn $@ if $@; # avoid errors - just warn
5567 # Note: use $nockeck to skip tests if VM configuration file exists.
5568 # We need that when migration VMs to other nodes (files already moved)
5569 # Note: we set $keepActive in vzdump stop mode - volumes need to stay active
5571 my ($storecfg, $vmid, $skiplock, $nocheck, $timeout, $shutdown, $force, $keepActive, $migratedfrom) = @_;
5573 $force = 1 if !defined($force) && !$shutdown;
5576 my $pid = check_running
($vmid, $nocheck, $migratedfrom);
5577 kill 15, $pid if $pid;
5578 my $conf = PVE
::QemuConfig-
>load_config($vmid, $migratedfrom);
5579 vm_stop_cleanup
($storecfg, $vmid, $conf, $keepActive, 0);
5583 PVE
::QemuConfig-
>lock_config($vmid, sub {
5585 my $pid = check_running
($vmid, $nocheck);
5590 $conf = PVE
::QemuConfig-
>load_config($vmid);
5591 PVE
::QemuConfig-
>check_lock($conf) if !$skiplock;
5592 if (!defined($timeout) && $shutdown && $conf->{startup
}) {
5593 my $opts = PVE
::JSONSchema
::pve_parse_startup_order
($conf->{startup
});
5594 $timeout = $opts->{down
} if $opts->{down
};
5596 PVE
::GuestHelpers
::exec_hookscript
($conf, $vmid, 'pre-stop');
5599 $timeout = 60 if !defined($timeout);
5603 if (defined($conf) && parse_guest_agent
($conf)->{enabled
}) {
5604 vm_qmp_command
($vmid, { execute
=> "guest-shutdown" }, $nocheck);
5606 vm_qmp_command
($vmid, { execute
=> "system_powerdown" }, $nocheck);
5609 vm_qmp_command
($vmid, { execute
=> "quit" }, $nocheck);
5616 while (($count < $timeout) && check_running
($vmid, $nocheck)) {
5621 if ($count >= $timeout) {
5623 warn "VM still running - terminating now with SIGTERM\n";
5626 die "VM quit/powerdown failed - got timeout\n";
5629 vm_stop_cleanup
($storecfg, $vmid, $conf, $keepActive, 1) if $conf;
5634 warn "VM quit/powerdown failed - terminating now with SIGTERM\n";
5637 die "VM quit/powerdown failed\n";
5645 while (($count < $timeout) && check_running
($vmid, $nocheck)) {
5650 if ($count >= $timeout) {
5651 warn "VM still running - terminating now with SIGKILL\n";
5656 vm_stop_cleanup
($storecfg, $vmid, $conf, $keepActive, 1) if $conf;
5661 my ($vmid, $skiplock) = @_;
5663 PVE
::QemuConfig-
>lock_config($vmid, sub {
5665 my $conf = PVE
::QemuConfig-
>load_config($vmid);
5667 PVE
::QemuConfig-
>check_lock($conf)
5668 if !($skiplock || PVE
::QemuConfig-
>has_lock($conf, 'backup'));
5670 vm_mon_cmd
($vmid, "stop");
5675 my ($vmid, $skiplock, $nocheck) = @_;
5677 PVE
::QemuConfig-
>lock_config($vmid, sub {
5679 my $res = vm_mon_cmd
($vmid, 'query-status');
5680 my $resume_cmd = 'cont';
5682 if ($res->{status
} && $res->{status
} eq 'suspended') {
5683 $resume_cmd = 'system_wakeup';
5688 my $conf = PVE
::QemuConfig-
>load_config($vmid);
5690 PVE
::QemuConfig-
>check_lock($conf)
5691 if !($skiplock || PVE
::QemuConfig-
>has_lock($conf, 'backup'));
5693 vm_mon_cmd
($vmid, $resume_cmd);
5696 vm_mon_cmd_nocheck
($vmid, $resume_cmd);
5702 my ($vmid, $skiplock, $key) = @_;
5704 PVE
::QemuConfig-
>lock_config($vmid, sub {
5706 my $conf = PVE
::QemuConfig-
>load_config($vmid);
5708 # there is no qmp command, so we use the human monitor command
5709 vm_human_monitor_command
($vmid, "sendkey $key");
5714 my ($storecfg, $vmid, $skiplock) = @_;
5716 PVE
::QemuConfig-
>lock_config($vmid, sub {
5718 my $conf = PVE
::QemuConfig-
>load_config($vmid);
5720 if (!check_running
($vmid)) {
5721 destroy_vm
($storecfg, $vmid, undef, $skiplock);
5723 die "VM $vmid is running - destroy failed\n";
5728 # vzdump restore implementaion
5730 sub tar_archive_read_firstfile
{
5731 my $archive = shift;
5733 die "ERROR: file '$archive' does not exist\n" if ! -f
$archive;
5735 # try to detect archive type first
5736 my $pid = open (my $fh, '-|', 'tar', 'tf', $archive) ||
5737 die "unable to open file '$archive'\n";
5738 my $firstfile = <$fh>;
5742 die "ERROR: archive contaions no data\n" if !$firstfile;
5748 sub tar_restore_cleanup
{
5749 my ($storecfg, $statfile) = @_;
5751 print STDERR
"starting cleanup\n";
5753 if (my $fd = IO
::File-
>new($statfile, "r")) {
5754 while (defined(my $line = <$fd>)) {
5755 if ($line =~ m/vzdump:([^\s:]*):(\S+)$/) {
5758 if ($volid =~ m
|^/|) {
5759 unlink $volid || die 'unlink failed\n';
5761 PVE
::Storage
::vdisk_free
($storecfg, $volid);
5763 print STDERR
"temporary volume '$volid' sucessfuly removed\n";
5765 print STDERR
"unable to cleanup '$volid' - $@" if $@;
5767 print STDERR
"unable to parse line in statfile - $line";
5774 sub restore_archive
{
5775 my ($archive, $vmid, $user, $opts) = @_;
5777 my $format = $opts->{format
};
5780 if ($archive =~ m/\.tgz$/ || $archive =~ m/\.tar\.gz$/) {
5781 $format = 'tar' if !$format;
5783 } elsif ($archive =~ m/\.tar$/) {
5784 $format = 'tar' if !$format;
5785 } elsif ($archive =~ m/.tar.lzo$/) {
5786 $format = 'tar' if !$format;
5788 } elsif ($archive =~ m/\.vma$/) {
5789 $format = 'vma' if !$format;
5790 } elsif ($archive =~ m/\.vma\.gz$/) {
5791 $format = 'vma' if !$format;
5793 } elsif ($archive =~ m/\.vma\.lzo$/) {
5794 $format = 'vma' if !$format;
5797 $format = 'vma' if !$format; # default
5800 # try to detect archive format
5801 if ($format eq 'tar') {
5802 return restore_tar_archive
($archive, $vmid, $user, $opts);
5804 return restore_vma_archive
($archive, $vmid, $user, $opts, $comp);
5808 sub restore_update_config_line
{
5809 my ($outfd, $cookie, $vmid, $map, $line, $unique) = @_;
5811 return if $line =~ m/^\#qmdump\#/;
5812 return if $line =~ m/^\#vzdump\#/;
5813 return if $line =~ m/^lock:/;
5814 return if $line =~ m/^unused\d+:/;
5815 return if $line =~ m/^parent:/;
5816 return if $line =~ m/^template:/; # restored VM is never a template
5818 my $dc = PVE
::Cluster
::cfs_read_file
('datacenter.cfg');
5819 if (($line =~ m/^(vlan(\d+)):\s*(\S+)\s*$/)) {
5820 # try to convert old 1.X settings
5821 my ($id, $ind, $ethcfg) = ($1, $2, $3);
5822 foreach my $devconfig (PVE
::Tools
::split_list
($ethcfg)) {
5823 my ($model, $macaddr) = split(/\=/, $devconfig);
5824 $macaddr = PVE
::Tools
::random_ether_addr
($dc->{mac_prefix
}) if !$macaddr || $unique;
5827 bridge
=> "vmbr$ind",
5828 macaddr
=> $macaddr,
5830 my $netstr = print_net
($net);
5832 print $outfd "net$cookie->{netcount}: $netstr\n";
5833 $cookie->{netcount
}++;
5835 } elsif (($line =~ m/^(net\d+):\s*(\S+)\s*$/) && $unique) {
5836 my ($id, $netstr) = ($1, $2);
5837 my $net = parse_net
($netstr);
5838 $net->{macaddr
} = PVE
::Tools
::random_ether_addr
($dc->{mac_prefix
}) if $net->{macaddr
};
5839 $netstr = print_net
($net);
5840 print $outfd "$id: $netstr\n";
5841 } elsif ($line =~ m/^((ide|scsi|virtio|sata|efidisk)\d+):\s*(\S+)\s*$/) {
5844 my $di = parse_drive
($virtdev, $value);
5845 if (defined($di->{backup
}) && !$di->{backup
}) {
5846 print $outfd "#$line";
5847 } elsif ($map->{$virtdev}) {
5848 delete $di->{format
}; # format can change on restore
5849 $di->{file
} = $map->{$virtdev};
5850 $value = print_drive
($vmid, $di);
5851 print $outfd "$virtdev: $value\n";
5855 } elsif (($line =~ m/^vmgenid: (.*)/)) {
5857 if ($vmgenid ne '0') {
5858 # always generate a new vmgenid if there was a valid one setup
5859 $vmgenid = generate_uuid
();
5861 print $outfd "vmgenid: $vmgenid\n";
5862 } elsif (($line =~ m/^(smbios1: )(.*)/) && $unique) {
5863 my ($uuid, $uuid_str);
5864 UUID
::generate
($uuid);
5865 UUID
::unparse
($uuid, $uuid_str);
5866 my $smbios1 = parse_smbios1
($2);
5867 $smbios1->{uuid
} = $uuid_str;
5868 print $outfd $1.print_smbios1
($smbios1)."\n";
5875 my ($cfg, $vmid) = @_;
5877 my $info = PVE
::Storage
::vdisk_list
($cfg, undef, $vmid);
5879 my $volid_hash = {};
5880 foreach my $storeid (keys %$info) {
5881 foreach my $item (@{$info->{$storeid}}) {
5882 next if !($item->{volid
} && $item->{size
});
5883 $item->{path
} = PVE
::Storage
::path
($cfg, $item->{volid
});
5884 $volid_hash->{$item->{volid
}} = $item;
5891 sub is_volume_in_use
{
5892 my ($storecfg, $conf, $skip_drive, $volid) = @_;
5894 my $path = PVE
::Storage
::path
($storecfg, $volid);
5896 my $scan_config = sub {
5897 my ($cref, $snapname) = @_;
5899 foreach my $key (keys %$cref) {
5900 my $value = $cref->{$key};
5901 if (is_valid_drivename
($key)) {
5902 next if $skip_drive && $key eq $skip_drive;
5903 my $drive = parse_drive
($key, $value);
5904 next if !$drive || !$drive->{file
} || drive_is_cdrom
($drive);
5905 return 1 if $volid eq $drive->{file
};
5906 if ($drive->{file
} =~ m!^/!) {
5907 return 1 if $drive->{file
} eq $path;
5909 my ($storeid, $volname) = PVE
::Storage
::parse_volume_id
($drive->{file
}, 1);
5911 my $scfg = PVE
::Storage
::storage_config
($storecfg, $storeid, 1);
5913 return 1 if $path eq PVE
::Storage
::path
($storecfg, $drive->{file
}, $snapname);
5921 return 1 if &$scan_config($conf);
5925 foreach my $snapname (keys %{$conf->{snapshots
}}) {
5926 return 1 if &$scan_config($conf->{snapshots
}->{$snapname}, $snapname);
5932 sub update_disksize
{
5933 my ($vmid, $conf, $volid_hash) = @_;
5936 my $prefix = "VM $vmid:";
5938 # used and unused disks
5939 my $referenced = {};
5941 # Note: it is allowed to define multiple storages with same path (alias), so
5942 # we need to check both 'volid' and real 'path' (two different volid can point
5943 # to the same path).
5945 my $referencedpath = {};
5948 foreach my $opt (keys %$conf) {
5949 if (is_valid_drivename
($opt)) {
5950 my $drive = parse_drive
($opt, $conf->{$opt});
5951 my $volid = $drive->{file
};
5954 $referenced->{$volid} = 1;
5955 if ($volid_hash->{$volid} &&
5956 (my $path = $volid_hash->{$volid}->{path
})) {
5957 $referencedpath->{$path} = 1;
5960 next if drive_is_cdrom
($drive);
5961 next if !$volid_hash->{$volid};
5963 $drive->{size
} = $volid_hash->{$volid}->{size
};
5964 my $new = print_drive
($vmid, $drive);
5965 if ($new ne $conf->{$opt}) {
5967 $conf->{$opt} = $new;
5968 print "$prefix update disk '$opt' information.\n";
5973 # remove 'unusedX' entry if volume is used
5974 foreach my $opt (keys %$conf) {
5975 next if $opt !~ m/^unused\d+$/;
5976 my $volid = $conf->{$opt};
5977 my $path = $volid_hash->{$volid}->{path
} if $volid_hash->{$volid};
5978 if ($referenced->{$volid} || ($path && $referencedpath->{$path})) {
5979 print "$prefix remove entry '$opt', its volume '$volid' is in use.\n";
5981 delete $conf->{$opt};
5984 $referenced->{$volid} = 1;
5985 $referencedpath->{$path} = 1 if $path;
5988 foreach my $volid (sort keys %$volid_hash) {
5989 next if $volid =~ m/vm-$vmid-state-/;
5990 next if $referenced->{$volid};
5991 my $path = $volid_hash->{$volid}->{path
};
5992 next if !$path; # just to be sure
5993 next if $referencedpath->{$path};
5995 my $key = PVE
::QemuConfig-
>add_unused_volume($conf, $volid);
5996 print "$prefix add unreferenced volume '$volid' as '$key' to config.\n";
5997 $referencedpath->{$path} = 1; # avoid to add more than once (aliases)
6004 my ($vmid, $nolock, $dryrun) = @_;
6006 my $cfg = PVE
::Storage
::config
();
6008 # FIXME: Remove once our RBD plugin can handle CT and VM on a single storage
6009 # see: https://pve.proxmox.com/pipermail/pve-devel/2018-July/032900.html
6010 foreach my $stor (keys %{$cfg->{ids
}}) {
6011 delete($cfg->{ids
}->{$stor}) if ! $cfg->{ids
}->{$stor}->{content
}->{images
};
6014 print "rescan volumes...\n";
6015 my $volid_hash = scan_volids
($cfg, $vmid);
6017 my $updatefn = sub {
6020 my $conf = PVE
::QemuConfig-
>load_config($vmid);
6022 PVE
::QemuConfig-
>check_lock($conf);
6025 foreach my $volid (keys %$volid_hash) {
6026 my $info = $volid_hash->{$volid};
6027 $vm_volids->{$volid} = $info if $info->{vmid
} && $info->{vmid
} == $vmid;
6030 my $changes = update_disksize
($vmid, $conf, $vm_volids);
6032 PVE
::QemuConfig-
>write_config($vmid, $conf) if $changes && !$dryrun;
6035 if (defined($vmid)) {
6039 PVE
::QemuConfig-
>lock_config($vmid, $updatefn, $vmid);
6042 my $vmlist = config_list
();
6043 foreach my $vmid (keys %$vmlist) {
6047 PVE
::QemuConfig-
>lock_config($vmid, $updatefn, $vmid);
6053 sub restore_vma_archive
{
6054 my ($archive, $vmid, $user, $opts, $comp) = @_;
6056 my $readfrom = $archive;
6058 my $cfg = PVE
::Storage
::config
();
6060 my $bwlimit = $opts->{bwlimit
};
6062 my $dbg_cmdstring = '';
6063 my $add_pipe = sub {
6065 push @$commands, $cmd;
6066 $dbg_cmdstring .= ' | ' if length($dbg_cmdstring);
6067 $dbg_cmdstring .= PVE
::Tools
::cmd2string
($cmd);
6072 if ($archive eq '-') {
6075 # If we use a backup from a PVE defined storage we also consider that
6076 # storage's rate limit:
6077 my (undef, $volid) = PVE
::Storage
::path_to_volume_id
($cfg, $archive);
6078 if (defined($volid)) {
6079 my ($sid, undef) = PVE
::Storage
::parse_volume_id
($volid);
6080 my $readlimit = PVE
::Storage
::get_bandwidth_limit
('restore', [$sid], $bwlimit);
6082 print STDERR
"applying read rate limit: $readlimit\n";
6083 my $cstream = ['cstream', '-t', $readlimit*1024, '--', $readfrom];
6084 $add_pipe->($cstream);
6091 if ($comp eq 'gzip') {
6092 $cmd = ['zcat', $readfrom];
6093 } elsif ($comp eq 'lzop') {
6094 $cmd = ['lzop', '-d', '-c', $readfrom];
6096 die "unknown compression method '$comp'\n";
6101 my $tmpdir = "/var/tmp/vzdumptmp$$";
6104 # disable interrupts (always do cleanups)
6108 local $SIG{HUP
} = sub { warn "got interrupt - ignored\n"; };
6110 my $mapfifo = "/var/tmp/vzdumptmp$$.fifo";
6111 POSIX
::mkfifo
($mapfifo, 0600);
6114 my $openfifo = sub {
6115 open($fifofh, '>', $mapfifo) || die $!;
6118 $add_pipe->(['vma', 'extract', '-v', '-r', $mapfifo, $readfrom, $tmpdir]);
6125 my $rpcenv = PVE
::RPCEnvironment
::get
();
6127 my $conffile = PVE
::QemuConfig-
>config_file($vmid);
6128 my $tmpfn = "$conffile.$$.tmp";
6130 # Note: $oldconf is undef if VM does not exists
6131 my $cfs_path = PVE
::QemuConfig-
>cfs_config_path($vmid);
6132 my $oldconf = PVE
::Cluster
::cfs_read_file
($cfs_path);
6136 my $print_devmap = sub {
6137 my $virtdev_hash = {};
6139 my $cfgfn = "$tmpdir/qemu-server.conf";
6141 # we can read the config - that is already extracted
6142 my $fh = IO
::File-
>new($cfgfn, "r") ||
6143 "unable to read qemu-server.conf - $!\n";
6145 my $fwcfgfn = "$tmpdir/qemu-server.fw";
6147 my $pve_firewall_dir = '/etc/pve/firewall';
6148 mkdir $pve_firewall_dir; # make sure the dir exists
6149 PVE
::Tools
::file_copy
($fwcfgfn, "${pve_firewall_dir}/$vmid.fw");
6152 while (defined(my $line = <$fh>)) {
6153 if ($line =~ m/^\#qmdump\#map:(\S+):(\S+):(\S*):(\S*):$/) {
6154 my ($virtdev, $devname, $storeid, $format) = ($1, $2, $3, $4);
6155 die "archive does not contain data for drive '$virtdev'\n"
6156 if !$devinfo->{$devname};
6157 if (defined($opts->{storage
})) {
6158 $storeid = $opts->{storage
} || 'local';
6159 } elsif (!$storeid) {
6162 $format = 'raw' if !$format;
6163 $devinfo->{$devname}->{devname
} = $devname;
6164 $devinfo->{$devname}->{virtdev
} = $virtdev;
6165 $devinfo->{$devname}->{format
} = $format;
6166 $devinfo->{$devname}->{storeid
} = $storeid;
6168 # check permission on storage
6169 my $pool = $opts->{pool
}; # todo: do we need that?
6170 if ($user ne 'root@pam') {
6171 $rpcenv->check($user, "/storage/$storeid", ['Datastore.AllocateSpace']);
6174 $storage_limits{$storeid} = $bwlimit;
6176 $virtdev_hash->{$virtdev} = $devinfo->{$devname};
6180 foreach my $key (keys %storage_limits) {
6181 my $limit = PVE
::Storage
::get_bandwidth_limit
('restore', [$key], $bwlimit);
6183 print STDERR
"rate limit for storage $key: $limit KiB/s\n";
6184 $storage_limits{$key} = $limit * 1024;
6187 foreach my $devname (keys %$devinfo) {
6188 die "found no device mapping information for device '$devname'\n"
6189 if !$devinfo->{$devname}->{virtdev
};
6192 # create empty/temp config
6194 PVE
::Tools
::file_set_contents
($conffile, "memory: 128\n");
6195 foreach_drive
($oldconf, sub {
6196 my ($ds, $drive) = @_;
6198 return if drive_is_cdrom
($drive);
6200 my $volid = $drive->{file
};
6202 return if !$volid || $volid =~ m
|^/|;
6204 my ($path, $owner) = PVE
::Storage
::path
($cfg, $volid);
6205 return if !$path || !$owner || ($owner != $vmid);
6207 # Note: only delete disk we want to restore
6208 # other volumes will become unused
6209 if ($virtdev_hash->{$ds}) {
6210 eval { PVE
::Storage
::vdisk_free
($cfg, $volid); };
6217 # delete vmstate files
6218 # since after the restore we have no snapshots anymore
6219 foreach my $snapname (keys %{$oldconf->{snapshots
}}) {
6220 my $snap = $oldconf->{snapshots
}->{$snapname};
6221 if ($snap->{vmstate
}) {
6222 eval { PVE
::Storage
::vdisk_free
($cfg, $snap->{vmstate
}); };
6231 foreach my $virtdev (sort keys %$virtdev_hash) {
6232 my $d = $virtdev_hash->{$virtdev};
6233 my $alloc_size = int(($d->{size
} + 1024 - 1)/1024);
6234 my $storeid = $d->{storeid
};
6235 my $scfg = PVE
::Storage
::storage_config
($cfg, $storeid);
6238 if (my $limit = $storage_limits{$storeid}) {
6239 $map_opts .= "throttling.bps=$limit:throttling.group=$storeid:";
6242 # test if requested format is supported
6243 my ($defFormat, $validFormats) = PVE
::Storage
::storage_default_format
($cfg, $storeid);
6244 my $supported = grep { $_ eq $d->{format
} } @$validFormats;
6245 $d->{format
} = $defFormat if !$supported;
6247 my $volid = PVE
::Storage
::vdisk_alloc
($cfg, $storeid, $vmid,
6248 $d->{format
}, undef, $alloc_size);
6249 print STDERR
"new volume ID is '$volid'\n";
6250 $d->{volid
} = $volid;
6251 my $path = PVE
::Storage
::path
($cfg, $volid);
6253 PVE
::Storage
::activate_volumes
($cfg,[$volid]);
6255 my $write_zeros = 1;
6256 if (PVE
::Storage
::volume_has_feature
($cfg, 'sparseinit', $volid)) {
6260 print $fifofh "${map_opts}format=$d->{format}:${write_zeros}:$d->{devname}=$path\n";
6262 print "map '$d->{devname}' to '$path' (write zeros = ${write_zeros})\n";
6263 $map->{$virtdev} = $volid;
6266 $fh->seek(0, 0) || die "seek failed - $!\n";
6268 my $outfd = new IO
::File
($tmpfn, "w") ||
6269 die "unable to write config for VM $vmid\n";
6271 my $cookie = { netcount
=> 0 };
6272 while (defined(my $line = <$fh>)) {
6273 restore_update_config_line
($outfd, $cookie, $vmid, $map, $line, $opts->{unique
});
6286 local $SIG{PIPE
} = sub { die "interrupted by signal\n"; };
6287 local $SIG{ALRM
} = sub { die "got timeout\n"; };
6289 $oldtimeout = alarm($timeout);
6296 if ($line =~ m/^DEV:\sdev_id=(\d+)\ssize:\s(\d+)\sdevname:\s(\S+)$/) {
6297 my ($dev_id, $size, $devname) = ($1, $2, $3);
6298 $devinfo->{$devname} = { size
=> $size, dev_id
=> $dev_id };
6299 } elsif ($line =~ m/^CTIME: /) {
6300 # we correctly received the vma config, so we can disable
6301 # the timeout now for disk allocation (set to 10 minutes, so
6302 # that we always timeout if something goes wrong)
6305 print $fifofh "done\n";
6306 my $tmp = $oldtimeout || 0;
6307 $oldtimeout = undef;
6313 print "restore vma archive: $dbg_cmdstring\n";
6314 run_command
($commands, input
=> $input, outfunc
=> $parser, afterfork
=> $openfifo);
6318 alarm($oldtimeout) if $oldtimeout;
6321 foreach my $devname (keys %$devinfo) {
6322 my $volid = $devinfo->{$devname}->{volid
};
6323 push @$vollist, $volid if $volid;
6326 PVE
::Storage
::deactivate_volumes
($cfg, $vollist);
6334 foreach my $devname (keys %$devinfo) {
6335 my $volid = $devinfo->{$devname}->{volid
};
6338 if ($volid =~ m
|^/|) {
6339 unlink $volid || die 'unlink failed\n';
6341 PVE
::Storage
::vdisk_free
($cfg, $volid);
6343 print STDERR
"temporary volume '$volid' sucessfuly removed\n";
6345 print STDERR
"unable to cleanup '$volid' - $@" if $@;
6352 rename($tmpfn, $conffile) ||
6353 die "unable to commit configuration file '$conffile'\n";
6355 PVE
::Cluster
::cfs_update
(); # make sure we read new file
6357 eval { rescan
($vmid, 1); };
6361 sub restore_tar_archive
{
6362 my ($archive, $vmid, $user, $opts) = @_;
6364 if ($archive ne '-') {
6365 my $firstfile = tar_archive_read_firstfile
($archive);
6366 die "ERROR: file '$archive' dos not lock like a QemuServer vzdump backup\n"
6367 if $firstfile ne 'qemu-server.conf';
6370 my $storecfg = PVE
::Storage
::config
();
6372 # destroy existing data - keep empty config
6373 my $vmcfgfn = PVE
::QemuConfig-
>config_file($vmid);
6374 destroy_vm
($storecfg, $vmid, 1) if -f
$vmcfgfn;
6376 my $tocmd = "/usr/lib/qemu-server/qmextract";
6378 $tocmd .= " --storage " . PVE
::Tools
::shellquote
($opts->{storage
}) if $opts->{storage
};
6379 $tocmd .= " --pool " . PVE
::Tools
::shellquote
($opts->{pool
}) if $opts->{pool
};
6380 $tocmd .= ' --prealloc' if $opts->{prealloc
};
6381 $tocmd .= ' --info' if $opts->{info
};
6383 # tar option "xf" does not autodetect compression when read from STDIN,
6384 # so we pipe to zcat
6385 my $cmd = "zcat -f|tar xf " . PVE
::Tools
::shellquote
($archive) . " " .
6386 PVE
::Tools
::shellquote
("--to-command=$tocmd");
6388 my $tmpdir = "/var/tmp/vzdumptmp$$";
6391 local $ENV{VZDUMP_TMPDIR
} = $tmpdir;
6392 local $ENV{VZDUMP_VMID
} = $vmid;
6393 local $ENV{VZDUMP_USER
} = $user;
6395 my $conffile = PVE
::QemuConfig-
>config_file($vmid);
6396 my $tmpfn = "$conffile.$$.tmp";
6398 # disable interrupts (always do cleanups)
6402 local $SIG{HUP
} = sub { print STDERR
"got interrupt - ignored\n"; };
6410 local $SIG{PIPE
} = sub { die "interrupted by signal\n"; };
6412 if ($archive eq '-') {
6413 print "extracting archive from STDIN\n";
6414 run_command
($cmd, input
=> "<&STDIN");
6416 print "extracting archive '$archive'\n";
6420 return if $opts->{info
};
6424 my $statfile = "$tmpdir/qmrestore.stat";
6425 if (my $fd = IO
::File-
>new($statfile, "r")) {
6426 while (defined (my $line = <$fd>)) {
6427 if ($line =~ m/vzdump:([^\s:]*):(\S+)$/) {
6428 $map->{$1} = $2 if $1;
6430 print STDERR
"unable to parse line in statfile - $line\n";
6436 my $confsrc = "$tmpdir/qemu-server.conf";
6438 my $srcfd = new IO
::File
($confsrc, "r") ||
6439 die "unable to open file '$confsrc'\n";
6441 my $outfd = new IO
::File
($tmpfn, "w") ||
6442 die "unable to write config for VM $vmid\n";
6444 my $cookie = { netcount
=> 0 };
6445 while (defined (my $line = <$srcfd>)) {
6446 restore_update_config_line
($outfd, $cookie, $vmid, $map, $line, $opts->{unique
});
6458 tar_restore_cleanup
($storecfg, "$tmpdir/qmrestore.stat") if !$opts->{info
};
6465 rename $tmpfn, $conffile ||
6466 die "unable to commit configuration file '$conffile'\n";
6468 PVE
::Cluster
::cfs_update
(); # make sure we read new file
6470 eval { rescan
($vmid, 1); };
6474 sub foreach_storage_used_by_vm
{
6475 my ($conf, $func) = @_;
6479 foreach_drive
($conf, sub {
6480 my ($ds, $drive) = @_;
6481 return if drive_is_cdrom
($drive);
6483 my $volid = $drive->{file
};
6485 my ($sid, $volname) = PVE
::Storage
::parse_volume_id
($volid, 1);
6486 $sidhash->{$sid} = $sid if $sid;
6489 foreach my $sid (sort keys %$sidhash) {
6494 sub do_snapshots_with_qemu
{
6495 my ($storecfg, $volid) = @_;
6497 my $storage_name = PVE
::Storage
::parse_volume_id
($volid);
6499 if ($qemu_snap_storage->{$storecfg->{ids
}->{$storage_name}->{type
}}
6500 && !$storecfg->{ids
}->{$storage_name}->{krbd
}){
6504 if ($volid =~ m/\.(qcow2|qed)$/){
6511 sub qga_check_running
{
6512 my ($vmid, $nowarn) = @_;
6514 eval { vm_mon_cmd
($vmid, "guest-ping", timeout
=> 3); };
6516 warn "Qemu Guest Agent is not running - $@" if !$nowarn;
6522 sub template_create
{
6523 my ($vmid, $conf, $disk) = @_;
6525 my $storecfg = PVE
::Storage
::config
();
6527 foreach_drive
($conf, sub {
6528 my ($ds, $drive) = @_;
6530 return if drive_is_cdrom
($drive);
6531 return if $disk && $ds ne $disk;
6533 my $volid = $drive->{file
};
6534 return if !PVE
::Storage
::volume_has_feature
($storecfg, 'template', $volid);
6536 my $voliddst = PVE
::Storage
::vdisk_create_base
($storecfg, $volid);
6537 $drive->{file
} = $voliddst;
6538 $conf->{$ds} = print_drive
($vmid, $drive);
6539 PVE
::QemuConfig-
>write_config($vmid, $conf);
6543 sub convert_iscsi_path
{
6546 if ($path =~ m
|^iscsi
://([^/]+)/([^/]+)/(.+)$|) {
6551 my $initiator_name = get_initiator_name
();
6553 return "file.driver=iscsi,file.transport=tcp,file.initiator-name=$initiator_name,".
6554 "file.portal=$portal,file.target=$target,file.lun=$lun,driver=raw";
6557 die "cannot convert iscsi path '$path', unkown format\n";
6560 sub qemu_img_convert
{
6561 my ($src_volid, $dst_volid, $size, $snapname, $is_zero_initialized) = @_;
6563 my $storecfg = PVE
::Storage
::config
();
6564 my ($src_storeid, $src_volname) = PVE
::Storage
::parse_volume_id
($src_volid, 1);
6565 my ($dst_storeid, $dst_volname) = PVE
::Storage
::parse_volume_id
($dst_volid, 1);
6567 if ($src_storeid && $dst_storeid) {
6569 PVE
::Storage
::activate_volumes
($storecfg, [$src_volid], $snapname);
6571 my $src_scfg = PVE
::Storage
::storage_config
($storecfg, $src_storeid);
6572 my $dst_scfg = PVE
::Storage
::storage_config
($storecfg, $dst_storeid);
6574 my $src_format = qemu_img_format
($src_scfg, $src_volname);
6575 my $dst_format = qemu_img_format
($dst_scfg, $dst_volname);
6577 my $src_path = PVE
::Storage
::path
($storecfg, $src_volid, $snapname);
6578 my $dst_path = PVE
::Storage
::path
($storecfg, $dst_volid);
6580 my $src_is_iscsi = ($src_path =~ m
|^iscsi
://|);
6581 my $dst_is_iscsi = ($dst_path =~ m
|^iscsi
://|);
6584 push @$cmd, '/usr/bin/qemu-img', 'convert', '-p', '-n';
6585 push @$cmd, '-l', "snapshot.name=$snapname" if($snapname && $src_format eq "qcow2");
6586 push @$cmd, '-t', 'none' if $dst_scfg->{type
} eq 'zfspool';
6587 push @$cmd, '-T', 'none' if $src_scfg->{type
} eq 'zfspool';
6589 if ($src_is_iscsi) {
6590 push @$cmd, '--image-opts';
6591 $src_path = convert_iscsi_path
($src_path);
6593 push @$cmd, '-f', $src_format;
6596 if ($dst_is_iscsi) {
6597 push @$cmd, '--target-image-opts';
6598 $dst_path = convert_iscsi_path
($dst_path);
6600 push @$cmd, '-O', $dst_format;
6603 push @$cmd, $src_path;
6605 if (!$dst_is_iscsi && $is_zero_initialized) {
6606 push @$cmd, "zeroinit:$dst_path";
6608 push @$cmd, $dst_path;
6613 if($line =~ m/\((\S+)\/100\
%\)/){
6615 my $transferred = int($size * $percent / 100);
6616 my $remaining = $size - $transferred;
6618 print "transferred: $transferred bytes remaining: $remaining bytes total: $size bytes progression: $percent %\n";
6623 eval { run_command
($cmd, timeout
=> undef, outfunc
=> $parser); };
6625 die "copy failed: $err" if $err;
6629 sub qemu_img_format
{
6630 my ($scfg, $volname) = @_;
6632 if ($scfg->{path
} && $volname =~ m/\.($QEMU_FORMAT_RE)$/) {
6639 sub qemu_drive_mirror
{
6640 my ($vmid, $drive, $dst_volid, $vmiddst, $is_zero_initialized, $jobs, $skipcomplete, $qga) = @_;
6642 $jobs = {} if !$jobs;
6646 $jobs->{"drive-$drive"} = {};
6648 if ($dst_volid =~ /^nbd:/) {
6649 $qemu_target = $dst_volid;
6652 my $storecfg = PVE
::Storage
::config
();
6653 my ($dst_storeid, $dst_volname) = PVE
::Storage
::parse_volume_id
($dst_volid);
6655 my $dst_scfg = PVE
::Storage
::storage_config
($storecfg, $dst_storeid);
6657 $format = qemu_img_format
($dst_scfg, $dst_volname);
6659 my $dst_path = PVE
::Storage
::path
($storecfg, $dst_volid);
6661 $qemu_target = $is_zero_initialized ?
"zeroinit:$dst_path" : $dst_path;
6664 my $opts = { timeout
=> 10, device
=> "drive-$drive", mode
=> "existing", sync
=> "full", target
=> $qemu_target };
6665 $opts->{format
} = $format if $format;
6667 print "drive mirror is starting for drive-$drive\n";
6669 eval { vm_mon_cmd
($vmid, "drive-mirror", %$opts); }; #if a job already run for this device,it's throw an error
6672 eval { PVE
::QemuServer
::qemu_blockjobs_cancel
($vmid, $jobs) };
6673 die "mirroring error: $err";
6676 qemu_drive_mirror_monitor
($vmid, $vmiddst, $jobs, $skipcomplete, $qga);
6679 sub qemu_drive_mirror_monitor
{
6680 my ($vmid, $vmiddst, $jobs, $skipcomplete, $qga) = @_;
6683 my $err_complete = 0;
6686 die "storage migration timed out\n" if $err_complete > 300;
6688 my $stats = vm_mon_cmd
($vmid, "query-block-jobs");
6690 my $running_mirror_jobs = {};
6691 foreach my $stat (@$stats) {
6692 next if $stat->{type
} ne 'mirror';
6693 $running_mirror_jobs->{$stat->{device
}} = $stat;
6696 my $readycounter = 0;
6698 foreach my $job (keys %$jobs) {
6700 if(defined($jobs->{$job}->{complete
}) && !defined($running_mirror_jobs->{$job})) {
6701 print "$job : finished\n";
6702 delete $jobs->{$job};
6706 die "$job: mirroring has been cancelled\n" if !defined($running_mirror_jobs->{$job});
6708 my $busy = $running_mirror_jobs->{$job}->{busy
};
6709 my $ready = $running_mirror_jobs->{$job}->{ready
};
6710 if (my $total = $running_mirror_jobs->{$job}->{len
}) {
6711 my $transferred = $running_mirror_jobs->{$job}->{offset
} || 0;
6712 my $remaining = $total - $transferred;
6713 my $percent = sprintf "%.2f", ($transferred * 100 / $total);
6715 print "$job: transferred: $transferred bytes remaining: $remaining bytes total: $total bytes progression: $percent % busy: $busy ready: $ready \n";
6718 $readycounter++ if $running_mirror_jobs->{$job}->{ready
};
6721 last if scalar(keys %$jobs) == 0;
6723 if ($readycounter == scalar(keys %$jobs)) {
6724 print "all mirroring jobs are ready \n";
6725 last if $skipcomplete; #do the complete later
6727 if ($vmiddst && $vmiddst != $vmid) {
6728 my $agent_running = $qga && qga_check_running
($vmid);
6729 if ($agent_running) {
6730 print "freeze filesystem\n";
6731 eval { PVE
::QemuServer
::vm_mon_cmd
($vmid, "guest-fsfreeze-freeze"); };
6733 print "suspend vm\n";
6734 eval { PVE
::QemuServer
::vm_suspend
($vmid, 1); };
6737 # if we clone a disk for a new target vm, we don't switch the disk
6738 PVE
::QemuServer
::qemu_blockjobs_cancel
($vmid, $jobs);
6740 if ($agent_running) {
6741 print "unfreeze filesystem\n";
6742 eval { PVE
::QemuServer
::vm_mon_cmd
($vmid, "guest-fsfreeze-thaw"); };
6744 print "resume vm\n";
6745 eval { PVE
::QemuServer
::vm_resume
($vmid, 1, 1); };
6751 foreach my $job (keys %$jobs) {
6752 # try to switch the disk if source and destination are on the same guest
6753 print "$job: Completing block job...\n";
6755 eval { vm_mon_cmd
($vmid, "block-job-complete", device
=> $job) };
6756 if ($@ =~ m/cannot be completed/) {
6757 print "$job: Block job cannot be completed, try again.\n";
6760 print "$job: Completed successfully.\n";
6761 $jobs->{$job}->{complete
} = 1;
6772 eval { PVE
::QemuServer
::qemu_blockjobs_cancel
($vmid, $jobs) };
6773 die "mirroring error: $err";
6778 sub qemu_blockjobs_cancel
{
6779 my ($vmid, $jobs) = @_;
6781 foreach my $job (keys %$jobs) {
6782 print "$job: Cancelling block job\n";
6783 eval { vm_mon_cmd
($vmid, "block-job-cancel", device
=> $job); };
6784 $jobs->{$job}->{cancel
} = 1;
6788 my $stats = vm_mon_cmd
($vmid, "query-block-jobs");
6790 my $running_jobs = {};
6791 foreach my $stat (@$stats) {
6792 $running_jobs->{$stat->{device
}} = $stat;
6795 foreach my $job (keys %$jobs) {
6797 if (defined($jobs->{$job}->{cancel
}) && !defined($running_jobs->{$job})) {
6798 print "$job: Done.\n";
6799 delete $jobs->{$job};
6803 last if scalar(keys %$jobs) == 0;
6810 my ($storecfg, $vmid, $running, $drivename, $drive, $snapname,
6811 $newvmid, $storage, $format, $full, $newvollist, $jobs, $skipcomplete, $qga) = @_;
6816 print "create linked clone of drive $drivename ($drive->{file})\n";
6817 $newvolid = PVE
::Storage
::vdisk_clone
($storecfg, $drive->{file
}, $newvmid, $snapname);
6818 push @$newvollist, $newvolid;
6821 my ($storeid, $volname) = PVE
::Storage
::parse_volume_id
($drive->{file
});
6822 $storeid = $storage if $storage;
6824 my $dst_format = resolve_dst_disk_format
($storecfg, $storeid, $volname, $format);
6825 my ($size) = PVE
::Storage
::volume_size_info
($storecfg, $drive->{file
}, 3);
6827 print "create full clone of drive $drivename ($drive->{file})\n";
6829 if (drive_is_cloudinit
($drive)) {
6830 $name = "vm-$newvmid-cloudinit";
6832 # cloudinit only supports raw and qcow2 atm:
6833 if ($dst_format eq 'qcow2') {
6835 } elsif ($dst_format ne 'raw') {
6836 die "clone: unhandled format for cloudinit image\n";
6839 $newvolid = PVE
::Storage
::vdisk_alloc
($storecfg, $storeid, $newvmid, $dst_format, $name, ($size/1024));
6840 push @$newvollist, $newvolid;
6842 PVE
::Storage
::activate_volumes
($storecfg, [$newvolid]);
6844 my $sparseinit = PVE
::Storage
::volume_has_feature
($storecfg, 'sparseinit', $newvolid);
6845 if (!$running || $snapname) {
6846 qemu_img_convert
($drive->{file
}, $newvolid, $size, $snapname, $sparseinit);
6849 my $kvmver = get_running_qemu_version
($vmid);
6850 if (!qemu_machine_feature_enabled
(undef, $kvmver, 2, 7)) {
6851 die "drive-mirror with iothread requires qemu version 2.7 or higher\n"
6852 if $drive->{iothread
};
6855 qemu_drive_mirror
($vmid, $drivename, $newvolid, $newvmid, $sparseinit, $jobs, $skipcomplete, $qga);
6859 my ($size) = PVE
::Storage
::volume_size_info
($storecfg, $newvolid, 3);
6862 $disk->{format
} = undef;
6863 $disk->{file
} = $newvolid;
6864 $disk->{size
} = $size;
6869 # this only works if VM is running
6870 sub get_current_qemu_machine
{
6873 my $cmd = { execute
=> 'query-machines', arguments
=> {} };
6874 my $res = vm_qmp_command
($vmid, $cmd);
6876 my ($current, $default);
6877 foreach my $e (@$res) {
6878 $default = $e->{name
} if $e->{'is-default'};
6879 $current = $e->{name
} if $e->{'is-current'};
6882 # fallback to the default machine if current is not supported by qemu
6883 return $current || $default || 'pc';
6886 sub get_running_qemu_version
{
6888 my $cmd = { execute
=> 'query-version', arguments
=> {} };
6889 my $res = vm_qmp_command
($vmid, $cmd);
6890 return "$res->{qemu}->{major}.$res->{qemu}->{minor}";
6893 sub qemu_machine_feature_enabled
{
6894 my ($machine, $kvmver, $version_major, $version_minor) = @_;
6899 if ($machine && $machine =~ m/^((?:pc(-i440fx|-q35)?|virt)-(\d+)\.(\d+))/) {
6901 $current_major = $3;
6902 $current_minor = $4;
6904 } elsif ($kvmver =~ m/^(\d+)\.(\d+)/) {
6906 $current_major = $1;
6907 $current_minor = $2;
6910 return 1 if $current_major > $version_major ||
6911 ($current_major == $version_major &&
6912 $current_minor >= $version_minor);
6915 sub qemu_machine_pxe
{
6916 my ($vmid, $conf, $machine) = @_;
6918 $machine = PVE
::QemuServer
::get_current_qemu_machine
($vmid) if !$machine;
6920 if ($conf->{machine
} && $conf->{machine
} =~ m/\.pxe$/) {
6927 sub qemu_use_old_bios_files
{
6928 my ($machine_type) = @_;
6930 return if !$machine_type;
6932 my $use_old_bios_files = undef;
6934 if ($machine_type =~ m/^(\S+)\.pxe$/) {
6936 $use_old_bios_files = 1;
6938 my $kvmver = kvm_user_version
();
6939 # Note: kvm version < 2.4 use non-efi pxe files, and have problems when we
6940 # load new efi bios files on migration. So this hack is required to allow
6941 # live migration from qemu-2.2 to qemu-2.4, which is sometimes used when
6942 # updrading from proxmox-ve-3.X to proxmox-ve 4.0
6943 $use_old_bios_files = !qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 4);
6946 return ($use_old_bios_files, $machine_type);
6949 sub create_efidisk
($$$$$) {
6950 my ($storecfg, $storeid, $vmid, $fmt, $arch) = @_;
6952 my (undef, $ovmf_vars) = get_ovmf_files
($arch);
6953 die "EFI vars default image not found\n" if ! -f
$ovmf_vars;
6955 my $vars_size = PVE
::Tools
::convert_size
(-s
$ovmf_vars, 'b' => 'kb');
6956 my $volid = PVE
::Storage
::vdisk_alloc
($storecfg, $storeid, $vmid, $fmt, undef, $vars_size);
6957 PVE
::Storage
::activate_volumes
($storecfg, [$volid]);
6959 my $path = PVE
::Storage
::path
($storecfg, $volid);
6961 run_command
(['/usr/bin/qemu-img', 'convert', '-n', '-f', 'raw', '-O', $fmt, $ovmf_vars, $path]);
6963 die "Copying EFI vars image failed: $@" if $@;
6965 return ($volid, $vars_size);
6968 sub vm_iothreads_list
{
6971 my $res = vm_mon_cmd
($vmid, 'query-iothreads');
6974 foreach my $iothread (@$res) {
6975 $iothreads->{ $iothread->{id
} } = $iothread->{"thread-id"};
6982 my ($conf, $drive) = @_;
6986 if (!$conf->{scsihw
} || ($conf->{scsihw
} =~ m/^lsi/)) {
6988 } elsif ($conf->{scsihw
} && ($conf->{scsihw
} eq 'virtio-scsi-single')) {
6994 my $controller = int($drive->{index} / $maxdev);
6995 my $controller_prefix = ($conf->{scsihw
} && $conf->{scsihw
} eq 'virtio-scsi-single') ?
"virtioscsi" : "scsihw";
6997 return ($maxdev, $controller, $controller_prefix);
7000 sub add_hyperv_enlightenments
{
7001 my ($cpuFlags, $winversion, $machine_type, $kvmver, $bios, $gpu_passthrough, $hv_vendor_id) = @_;
7003 return if $winversion < 6;
7004 return if $bios && $bios eq 'ovmf' && $winversion < 8;
7006 if ($gpu_passthrough || defined($hv_vendor_id)) {
7007 $hv_vendor_id //= 'proxmox';
7008 push @$cpuFlags , "hv_vendor_id=$hv_vendor_id";
7011 if (qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 3)) {
7012 push @$cpuFlags , 'hv_spinlocks=0x1fff';
7013 push @$cpuFlags , 'hv_vapic';
7014 push @$cpuFlags , 'hv_time';
7016 push @$cpuFlags , 'hv_spinlocks=0xffff';
7019 if (qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 6)) {
7020 push @$cpuFlags , 'hv_reset';
7021 push @$cpuFlags , 'hv_vpindex';
7022 push @$cpuFlags , 'hv_runtime';
7025 if ($winversion >= 7) {
7026 push @$cpuFlags , 'hv_relaxed';
7028 if (qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 12)) {
7029 push @$cpuFlags , 'hv_synic';
7030 push @$cpuFlags , 'hv_stimer';
7035 sub windows_version
{
7038 return 0 if !$ostype;
7042 if($ostype eq 'wxp' || $ostype eq 'w2k3' || $ostype eq 'w2k') {
7044 } elsif($ostype eq 'w2k8' || $ostype eq 'wvista') {
7046 } elsif ($ostype =~ m/^win(\d+)$/) {
7053 sub resolve_dst_disk_format
{
7054 my ($storecfg, $storeid, $src_volname, $format) = @_;
7055 my ($defFormat, $validFormats) = PVE
::Storage
::storage_default_format
($storecfg, $storeid);
7058 # if no target format is specified, use the source disk format as hint
7060 my $scfg = PVE
::Storage
::storage_config
($storecfg, $storeid);
7061 $format = qemu_img_format
($scfg, $src_volname);
7067 # test if requested format is supported - else use default
7068 my $supported = grep { $_ eq $format } @$validFormats;
7069 $format = $defFormat if !$supported;
7073 sub resolve_first_disk
{
7075 my @disks = PVE
::QemuServer
::valid_drive_names
();
7077 foreach my $ds (reverse @disks) {
7078 next if !$conf->{$ds};
7079 my $disk = PVE
::QemuServer
::parse_drive
($ds, $conf->{$ds});
7080 next if PVE
::QemuServer
::drive_is_cdrom
($disk);
7087 my ($uuid, $uuid_str);
7088 UUID
::generate
($uuid);
7089 UUID
::unparse
($uuid, $uuid_str);
7093 sub generate_smbios1_uuid
{
7094 return "uuid=".generate_uuid
();
7100 vm_mon_cmd
($vmid, 'nbd-server-stop');
7103 # bash completion helper
7105 sub complete_backup_archives
{
7106 my ($cmdname, $pname, $cvalue) = @_;
7108 my $cfg = PVE
::Storage
::config
();
7112 if ($cvalue =~ m/^([^:]+):/) {
7116 my $data = PVE
::Storage
::template_list
($cfg, $storeid, 'backup');
7119 foreach my $id (keys %$data) {
7120 foreach my $item (@{$data->{$id}}) {
7121 next if $item->{format
} !~ m/^vma\.(gz|lzo)$/;
7122 push @$res, $item->{volid
} if defined($item->{volid
});
7129 my $complete_vmid_full = sub {
7132 my $idlist = vmstatus
();
7136 foreach my $id (keys %$idlist) {
7137 my $d = $idlist->{$id};
7138 if (defined($running)) {
7139 next if $d->{template
};
7140 next if $running && $d->{status
} ne 'running';
7141 next if !$running && $d->{status
} eq 'running';
7150 return &$complete_vmid_full();
7153 sub complete_vmid_stopped
{
7154 return &$complete_vmid_full(0);
7157 sub complete_vmid_running
{
7158 return &$complete_vmid_full(1);
7161 sub complete_storage
{
7163 my $cfg = PVE
::Storage
::config
();
7164 my $ids = $cfg->{ids
};
7167 foreach my $sid (keys %$ids) {
7168 next if !PVE
::Storage
::storage_check_enabled
($cfg, $sid, undef, 1);
7169 next if !$ids->{$sid}->{content
}->{images
};