use PVE::QemuServer::Memory;
use PVE::QemuServer::USB qw(parse_usb_device);
use PVE::QemuServer::Cloudinit;
+use PVE::SysFSTools;
use PVE::Systemd;
use Time::HiRes qw(gettimeofday);
use File::Copy qw(copy);
use URI::Escape;
my $EDK2_FW_BASE = '/usr/share/pve-edk2-firmware/';
-my $OVMF_CODE = "$EDK2_FW_BASE/OVMF_CODE.fd";
-my $OVMF_VARS = "$EDK2_FW_BASE/OVMF_VARS.fd";
+my $OVMF = {
+ x86_64 => [
+ "$EDK2_FW_BASE/OVMF_CODE.fd",
+ "$EDK2_FW_BASE/OVMF_VARS.fd"
+ ],
+ aarch64 => [
+ "$EDK2_FW_BASE/AAVMF_CODE.fd",
+ "$EDK2_FW_BASE/AAVMF_VARS.fd"
+ ],
+};
my $qemu_snap_storage = {rbd => 1, sheepdog => 1};
PVE::JSONSchema::register_standard_option('pve-qemu-machine', {
description => "Specifies the Qemu machine type.",
type => 'string',
- pattern => '(pc|pc(-i440fx)?-\d+\.\d+(\.pxe)?|q35|pc-q35-\d+\.\d+(\.pxe)?)',
+ pattern => '(pc|pc(-i440fx)?-\d+\.\d+(\.pxe)?|q35|pc-q35-\d+\.\d+(\.pxe)?|virt(?:-\d+\.\d+)?)',
maxLength => 40,
optional => 1,
});
my $lock_dir = "/var/lock/qemu-server";
mkdir $lock_dir;
-my $pcisysfs = "/sys/bus/pci";
-
my $cpu_vendor_list = {
# Intel CPUs
486 => 'GenuineIntel',
optional => 1,
default => 0
},
+ 'hv-vendor-id' => {
+ type => 'string',
+ pattern => qr/[a-zA-Z0-9]{1,12}/,
+ format_description => 'vendor-id',
+ description => 'The Hyper-V vendor ID. Some drivers or programs inside Windows guests need a specific ID.',
+ optional => 1,
+ },
flags => {
description => "List of additional CPU flags separated by ';'."
. " Use '+FLAG' to enable, '-FLAG' to disable a flag."
default => 'std',
optional => 1,
default_key => 1,
- enum => [qw(cirrus qxl qxl2 qxl3 qxl4 serial0 serial1 serial2 serial3 std virtio vmware)],
+ enum => [qw(cirrus qxl qxl2 qxl3 qxl4 none serial0 serial1 serial2 serial3 std virtio vmware)],
},
memory => {
description => "Sets the VGA memory (in MiB). Has no effect with serial display.",
optional => 1,
type => 'string',
description => "Lock/unlock the VM.",
- enum => [qw(migrate backup snapshot rollback)],
+ enum => [qw(backup clone create migrate rollback snapshot snapshot-delete)],
},
cpulimit => {
optional => 1,
description => "Specifies the Qemu machine type of the running vm. This is used internally for snapshots.",
}),
machine => get_standard_option('pve-qemu-machine'),
+ arch => {
+ description => "Virtual processor architecture. Defaults to the host.",
+ optional => 1,
+ type => 'string',
+ enum => [qw(x86_64 aarch64)],
+ },
smbios1 => {
description => "Specify SMBIOS type 1 fields.",
type => 'string', format => 'pve-qm-smbios1',
};
PVE::JSONSchema::register_standard_option("pve-qm-usb", $usbdesc);
-# NOTE: the match-groups of this regex are used in parse_hostpci
-my $PCIRE = qr/([a-f0-9]{2}:[a-f0-9]{2})(?:\.([a-f0-9]))?/;
+my $PCIRE = qr/[a-f0-9]{2}:[a-f0-9]{2}(?:\.[a-f0-9])?/;
my $hostpci_fmt = {
host => {
default_key => 1,
optional => 1,
default => 0,
},
+ 'mdev' => {
+ type => 'string',
+ format_description => 'string',
+ pattern => '[^/\.:]+',
+ optional => 1,
+ description => <<EODESCR
+The type of mediated device to use.
+An instance of this type will be created on startup of the VM and
+will be cleaned up when the VM stops.
+EODESCR
+ }
};
PVE::JSONSchema::register_format('pve-qm-hostpci', $hostpci_fmt);
my $kvm_api_version = 0;
sub kvm_version {
-
return $kvm_api_version if $kvm_api_version;
- my $fh = IO::File->new("</dev/kvm") ||
- return 0;
+ open my $fh, '<', '/dev/kvm'
+ or return undef;
- if (my $v = $fh->ioctl(KVM_GET_API_VERSION(), 0)) {
- $kvm_api_version = $v;
- }
-
- $fh->close();
+ # 0xae00 => KVM_GET_API_VERSION
+ $kvm_api_version = ioctl($fh, 0xae00, 0);
- return $kvm_api_version;
+ return $kvm_api_version;
}
my $kvm_user_version;
}
-my $kernel_has_vhost_net = -c '/dev/vhost-net';
+sub kernel_has_vhost_net {
+ return -c '/dev/vhost-net';
+}
sub valid_drive_names {
# order is important - used to autoselect boot disk
}
sub print_tabletdevice_full {
- my ($conf) = @_;
+ my ($conf, $arch) = @_;
my $q35 = machine_type_is_q35($conf);
# we use uhci for old VMs because tablet driver was buggy in older qemu
- my $usbbus = $q35 ? "ehci" : "uhci";
+ my $usbbus;
+ if (machine_type_is_q35($conf) || $arch eq 'aarch64') {
+ $usbbus = 'ehci';
+ } else {
+ $usbbus = 'uhci';
+ }
return "usb-tablet,id=tablet,bus=$usbbus.0,port=1";
}
+sub print_keyboarddevice_full {
+ my ($conf, $arch, $machine) = @_;
+
+ return undef if $arch ne 'aarch64';
+
+ return "usb-kbd,id=keyboard,bus=ehci.0,port=2";
+}
+
sub print_drivedevice_full {
- my ($storecfg, $conf, $vmid, $drive, $bridges) = @_;
+ my ($storecfg, $conf, $vmid, $drive, $bridges, $arch, $machine_type) = @_;
my $device = '';
my $maxdev = 0;
if ($drive->{interface} eq 'virtio') {
- my $pciaddr = print_pci_addr("$drive->{interface}$drive->{index}", $bridges);
+ my $pciaddr = print_pci_addr("$drive->{interface}$drive->{index}", $bridges, $arch, $machine_type);
$device = "virtio-blk-pci,drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}$pciaddr";
$device .= ",iothread=iothread-$drive->{interface}$drive->{index}" if $drive->{iothread};
} elsif ($drive->{interface} eq 'scsi') {
}
sub print_netdevice_full {
- my ($vmid, $conf, $net, $netid, $bridges, $use_old_bios_files) = @_;
+ my ($vmid, $conf, $net, $netid, $bridges, $use_old_bios_files, $arch, $machine_type) = @_;
my $bootorder = $conf->{boot} || $confdesc->{boot}->{default};
$device = 'virtio-net-pci';
};
- my $pciaddr = print_pci_addr("$netid", $bridges);
+ my $pciaddr = print_pci_addr("$netid", $bridges, $arch, $machine_type);
my $tmpstr = "$device,mac=$net->{macaddr},netdev=$netid$pciaddr,id=$netid";
if ($net->{queues} && $net->{queues} > 1 && $net->{model} eq 'virtio'){
#Consider we have N queues, the number of vectors needed is 2*N + 2 (plus one config interrupt and control vq)
}
sub print_netdev_full {
- my ($vmid, $conf, $net, $netid, $hotplug) = @_;
+ my ($vmid, $conf, $arch, $net, $netid, $hotplug) = @_;
my $i = '';
if ($netid =~ m/^net(\d+)$/) {
if length($ifname) >= 16;
my $vhostparam = '';
- $vhostparam = ',vhost=on' if $kernel_has_vhost_net && $net->{model} eq 'virtio';
+ if (is_native($arch)) {
+ $vhostparam = ',vhost=on' if kernel_has_vhost_net() && $net->{model} eq 'virtio';
+ }
my $vmname = $conf->{name} || "vm$vmid";
};
sub print_vga_device {
- my ($conf, $vga, $id, $qxlnum, $bridges) = @_;
+ my ($conf, $vga, $arch, $machine, $id, $qxlnum, $bridges) = @_;
my $type = $vga_map->{$vga->{type}};
+ if ($arch eq 'aarch64' && defined($type) && $type eq 'virtio-vga') {
+ $type = 'virtio-gpu';
+ }
my $vgamem_mb = $vga->{memory};
if ($qxlnum) {
$type = $id ? 'qxl' : 'qxl-vga';
if ($q35 && $vgaid eq 'vga') {
# the first display uses pcie.0 bus on q35 machines
- $pciaddr = print_pcie_addr($vgaid, $bridges);
+ $pciaddr = print_pcie_addr($vgaid, $bridges, $arch, $machine);
} else {
- $pciaddr = print_pci_addr($vgaid, $bridges);
+ $pciaddr = print_pci_addr($vgaid, $bridges, $arch, $machine);
}
return "$type,id=${vgaid}${memory}${pciaddr}";
my @idlist = split(/;/, $res->{host});
delete $res->{host};
foreach my $id (@idlist) {
- if ($id =~ /^$PCIRE$/) {
- if (defined($2)) {
- push @{$res->{pciid}}, { id => $1, function => $2 };
- } else {
- my $pcidevices = lspci($1);
- $res->{pciid} = $pcidevices->{$1};
- }
- } else {
- # should have been caught by parse_property_string already
- die "failed to parse PCI id: $id\n";
+ if ($id =~ m/\./) { # full id 00:00.1
+ push @{$res->{pciid}}, {
+ id => $id,
+ };
+ } else { # partial id 00:00
+ $res->{pciid} = PVE::SysFSTools::lspci($id);
}
}
return $res;
}
}
-sub check_iommu_support{
- #fixme : need to check IOMMU support
- #http://www.linux-kvm.org/page/How_to_assign_devices_with_VT-d_in_KVM
-
- my $iommu=1;
- return $iommu;
-
-}
-
sub touch_config {
my ($vmid) = @_;
my @param = split(/\0/, $line);
my $cmd = $param[0];
- return if !$cmd || ($cmd !~ m|kvm$| && $cmd !~ m|qemu-system-x86_64$|);
+ return if !$cmd || ($cmd !~ m|kvm$| && $cmd !~ m@(?:^|/)qemu-system-[^/]+$@);
for (my $i = 0; $i < scalar (@param); $i++) {
my $p = $param[$i];
return $1 || 1;
}
+my $host_arch; # FIXME: fix PVE::Tools::get_host_arch
+sub get_host_arch() {
+ $host_arch = (POSIX::uname())[4] if !$host_arch;
+ return $host_arch;
+}
+
+sub is_native($) {
+ my ($arch) = @_;
+ return get_host_arch() eq $arch;
+}
+
+my $default_machines = {
+ x86_64 => 'pc',
+ aarch64 => 'virt',
+};
+
+sub get_basic_machine_info {
+ my ($conf, $forcemachine) = @_;
+
+ my $arch = $conf->{arch} // get_host_arch();
+ my $machine = $forcemachine || $conf->{machine} || $default_machines->{$arch};
+ return ($arch, $machine);
+}
+
+sub get_ovmf_files($) {
+ my ($arch) = @_;
+
+ my $ovmf = $OVMF->{$arch}
+ or die "no OVMF images known for architecture '$arch'\n";
+
+ return @$ovmf;
+}
+
+my $Arch2Qemu = {
+ aarch64 => '/usr/bin/qemu-system-aarch64',
+ x86_64 => '/usr/bin/qemu-system-x86_64',
+};
+sub get_command_for_arch($) {
+ my ($arch) = @_;
+ return '/usr/bin/kvm' if is_native($arch);
+
+ my $cmd = $Arch2Qemu->{$arch}
+ or die "don't know how to emulate architecture '$arch'\n";
+ return $cmd;
+}
+
+sub get_cpu_options {
+ my ($conf, $arch, $kvm, $machine_type, $kvm_off, $kvmver, $winversion, $gpu_passthrough) = @_;
+
+ my $cpuFlags = [];
+ my $ostype = $conf->{ostype};
+
+ my $cpu = $kvm ? "kvm64" : "qemu64";
+ if ($arch eq 'aarch64') {
+ $cpu = 'cortex-a57';
+ }
+ my $hv_vendor_id;
+ if (my $cputype = $conf->{cpu}) {
+ my $cpuconf = PVE::JSONSchema::parse_property_string($cpu_fmt, $cputype)
+ or die "Cannot parse cpu description: $cputype\n";
+ $cpu = $cpuconf->{cputype};
+ $kvm_off = 1 if $cpuconf->{hidden};
+ $hv_vendor_id = $cpuconf->{'hv-vendor-id'};
+
+ if (defined(my $flags = $cpuconf->{flags})) {
+ push @$cpuFlags, split(";", $flags);
+ }
+ }
+
+ push @$cpuFlags , '+lahf_lm' if $cpu eq 'kvm64' && $arch eq 'x86_64';
+
+ push @$cpuFlags , '-x2apic'
+ if $conf->{ostype} && $conf->{ostype} eq 'solaris';
+
+ push @$cpuFlags, '+sep' if $cpu eq 'kvm64' || $cpu eq 'kvm32';
+
+ push @$cpuFlags, '-rdtscp' if $cpu =~ m/^Opteron/;
+
+ if (qemu_machine_feature_enabled ($machine_type, $kvmver, 2, 3) && $arch eq 'x86_64') {
+
+ push @$cpuFlags , '+kvm_pv_unhalt' if $kvm;
+ push @$cpuFlags , '+kvm_pv_eoi' if $kvm;
+ }
+
+ add_hyperv_enlightenments($cpuFlags, $winversion, $machine_type, $kvmver, $conf->{bios}, $gpu_passthrough, $hv_vendor_id) if $kvm;
+
+ push @$cpuFlags, 'enforce' if $cpu ne 'host' && $kvm && $arch eq 'x86_64';
+
+ push @$cpuFlags, 'kvm=off' if $kvm_off;
+
+ if (my $cpu_vendor = $cpu_vendor_list->{$cpu}) {
+ push @$cpuFlags, "vendor=${cpu_vendor}"
+ if $cpu_vendor ne 'default';
+ } elsif ($arch ne 'aarch64') {
+ die "internal error"; # should not happen
+ }
+
+ $cpu .= "," . join(',', @$cpuFlags) if scalar(@$cpuFlags);
+
+ return ('-cpu', $cpu);
+}
+
sub config_to_command {
my ($storecfg, $vmid, $conf, $defaults, $forcemachine) = @_;
my $globalFlags = [];
my $machineFlags = [];
my $rtcFlags = [];
- my $cpuFlags = [];
my $devices = [];
my $pciaddr = '';
my $bridges = {};
my $vernum = 0; # unknown
my $ostype = $conf->{ostype};
my $winversion = windows_version($ostype);
- my $kvm = $conf->{kvm} // 1;
+ my $kvm = $conf->{kvm};
+
+ my ($arch, $machine_type) = get_basic_machine_info($conf, $forcemachine);
+ $kvm //= 1 if is_native($arch);
- die "KVM virtualisation configured, but not available. Either disable in VM configuration or enable in BIOS.\n" if (!$cpuinfo->{hvm} && $kvm);
+ if ($kvm) {
+ die "KVM virtualisation configured, but not available. Either disable in VM configuration or enable in BIOS.\n"
+ if !defined kvm_version();
+ }
if ($kvmver =~ m/^(\d+)\.(\d+)$/) {
$vernum = $1*1000000+$2*1000;
my $q35 = machine_type_is_q35($conf);
my $hotplug_features = parse_hotplug_features(defined($conf->{hotplug}) ? $conf->{hotplug} : '1');
- my $machine_type = $forcemachine || $conf->{machine};
my $use_old_bios_files = undef;
($use_old_bios_files, $machine_type) = qemu_use_old_bios_files($machine_type);
my $cpuunits = defined($conf->{cpuunits}) ?
$conf->{cpuunits} : $defaults->{cpuunits};
- push @$cmd, '/usr/bin/kvm';
+ push @$cmd, get_command_for_arch($arch);
push @$cmd, '-id', $vmid;
push @$cmd, '-mon', "chardev=qmp,mode=control";
if (qemu_machine_feature_enabled($machine_type, $kvmver, 2, 12)) {
- my $eventsocket = qmp_socket($vmid, 0, 'event');
- push @$cmd, '-chardev', "socket,id=qmp-event,path=$eventsocket,server,nowait";
+ push @$cmd, '-chardev', "socket,id=qmp-event,path=/var/run/qmeventd.sock,reconnect=5";
push @$cmd, '-mon', "chardev=qmp-event,mode=control";
}
push @$devices, '-device', 'vmgenid,guid='.$conf->{vmgenid};
}
+ my ($ovmf_code, $ovmf_vars) = get_ovmf_files($arch);
if ($conf->{bios} && $conf->{bios} eq 'ovmf') {
- die "uefi base image not found\n" if ! -f $OVMF_CODE;
+ die "uefi base image not found\n" if ! -f $ovmf_code;
my $path;
my $format;
} else {
warn "no efidisk configured! Using temporary efivars disk.\n";
$path = "/tmp/$vmid-ovmf.fd";
- PVE::Tools::file_copy($OVMF_VARS, $path, -s $OVMF_VARS);
+ PVE::Tools::file_copy($ovmf_vars, $path, -s $ovmf_vars);
$format = 'raw';
}
- push @$cmd, '-drive', "if=pflash,unit=0,format=raw,readonly,file=$OVMF_CODE";
+ push @$cmd, '-drive', "if=pflash,unit=0,format=raw,readonly,file=$ovmf_code";
push @$cmd, '-drive', "if=pflash,unit=1,format=$format,id=drive-efidisk0,file=$path";
}
# add usb controllers
- my @usbcontrollers = PVE::QemuServer::USB::get_usb_controllers($conf, $bridges, $q35, $usbdesc->{format}, $MAX_USB_DEVICES);
+ my @usbcontrollers = PVE::QemuServer::USB::get_usb_controllers($conf, $bridges, $arch, $machine_type, $usbdesc->{format}, $MAX_USB_DEVICES);
push @$devices, @usbcontrollers if @usbcontrollers;
my $vga = parse_vga($conf->{vga});
$vga->{type} = 'qxl' if $qxlnum;
if (!$vga->{type}) {
- if (qemu_machine_feature_enabled($machine_type, $kvmver, 2, 9)) {
+ if ($arch eq 'aarch64') {
+ $vga->{type} = 'virtio';
+ } elsif (qemu_machine_feature_enabled($machine_type, $kvmver, 2, 9)) {
$vga->{type} = (!$winversion || $winversion >= 6) ? 'std' : 'cirrus';
} else {
$vga->{type} = ($winversion >= 6) ? 'std' : 'cirrus';
$tablet = 0 if $vga->{type} =~ m/^serial\d+$/; # disable if we use serial terminal (no vga card)
}
- push @$devices, '-device', print_tabletdevice_full($conf) if $tablet;
+ if ($tablet) {
+ push @$devices, '-device', print_tabletdevice_full($conf, $arch) if $tablet;
+ my $kbd = print_keyboarddevice_full($conf, $arch);
+ push @$devices, '-device', $kbd if defined($kbd);
+ }
my $kvm_off = 0;
my $gpu_passthrough;
my $pcie = $d->{pcie};
if($pcie){
die "q35 machine model is not enabled" if !$q35;
- $pciaddr = print_pcie_addr("hostpci$i");
+ # win7 wants to have the pcie devices directly on the pcie bus
+ # instead of in the root port
+ if ($winversion == 7) {
+ $pciaddr = print_pcie_addr("hostpci${i}bus0");
+ } else {
+ $pciaddr = print_pcie_addr("hostpci$i");
+ }
}else{
- $pciaddr = print_pci_addr("hostpci$i", $bridges);
+ $pciaddr = print_pci_addr("hostpci$i", $bridges, $arch, $machine_type);
}
my $rombar = defined($d->{rombar}) && !$d->{rombar} ? ',rombar=0' : '';
if ($d->{'x-vga'}) {
$xvga = ',x-vga=on';
$kvm_off = 1;
- $vga->{type} = 'none';
+ $vga->{type} = 'none' if !defined($conf->{vga});
$gpu_passthrough = 1;
if ($conf->{bios} && $conf->{bios} eq 'ovmf') {
}
my $pcidevices = $d->{pciid};
my $multifunction = 1 if @$pcidevices > 1;
+ my $sysfspath;
+ if ($d->{mdev} && scalar(@$pcidevices) == 1) {
+ my $id = $pcidevices->[0]->{id};
+ my $uuid = PVE::SysFSTools::generate_mdev_uuid($vmid, $i);
+ $sysfspath = "/sys/bus/pci/devices/0000:$id/$uuid";
+ } elsif ($d->{mdev}) {
+ warn "ignoring mediated device with multifunction device\n";
+ }
my $j=0;
foreach my $pcidevice (@$pcidevices) {
$id .= ".$j" if $multifunction;
my $addr = $pciaddr;
$addr .= ".$j" if $multifunction;
- my $devicestr = "vfio-pci,host=$pcidevice->{id}.$pcidevice->{function},id=$id$addr";
+ my $devicestr = "vfio-pci";
+ if ($sysfspath) {
+ $devicestr .= ",sysfsdev=$sysfspath";
+ } else {
+ $devicestr .= ",host=$pcidevice->{id}";
+ }
+ $devicestr .= ",id=$id$addr";
if($j == 0){
$devicestr .= "$rombar$xvga";
if ($path eq 'socket') {
my $socket = "/var/run/qemu-server/${vmid}.serial$i";
push @$devices, '-chardev', "socket,id=serial$i,path=$socket,server,nowait";
- push @$devices, '-device', "isa-serial,chardev=serial$i";
+ # On aarch64, serial0 is the UART device. Qemu only allows
+ # connecting UART devices via the '-serial' command line, as
+ # the device has a fixed slot on the hardware...
+ if ($arch eq 'aarch64' && $i == 0) {
+ push @$devices, '-serial', "chardev:serial$i";
+ } else {
+ push @$devices, '-device', "isa-serial,chardev=serial$i";
+ }
} else {
die "no such serial device\n" if ! -c $path;
push @$devices, '-chardev', "tty,id=serial$i,path=$path";
push @$cmd, '-no-reboot' if defined($conf->{reboot}) && $conf->{reboot} == 0;
- if ($vga->{type} && $vga->{type} !~ m/^serial\d+$/ && $vga ne 'none'){
- push @$devices, '-device', print_vga_device($conf, $vga, undef, $qxlnum, $bridges);
+ if ($vga->{type} && $vga->{type} !~ m/^serial\d+$/ && $vga->{type} ne 'none'){
+ push @$devices, '-device', print_vga_device($conf, $vga, $arch, $machine_type, undef, $qxlnum, $bridges);
my $socket = vnc_socket($vmid);
push @$cmd, '-vnc', "unix:$socket,x509,password";
} else {
push @$rtcFlags, 'base=localtime';
}
- my $cpu = $kvm ? "kvm64" : "qemu64";
- if (my $cputype = $conf->{cpu}) {
- my $cpuconf = PVE::JSONSchema::parse_property_string($cpu_fmt, $cputype)
- or die "Cannot parse cpu description: $cputype\n";
- $cpu = $cpuconf->{cputype};
- $kvm_off = 1 if $cpuconf->{hidden};
-
- if (defined(my $flags = $cpuconf->{flags})) {
- push @$cpuFlags, split(";", $flags);
- }
- }
-
- push @$cpuFlags , '+lahf_lm' if $cpu eq 'kvm64';
-
- push @$cpuFlags , '-x2apic'
- if $conf->{ostype} && $conf->{ostype} eq 'solaris';
-
- push @$cpuFlags, '+sep' if $cpu eq 'kvm64' || $cpu eq 'kvm32';
-
- push @$cpuFlags, '-rdtscp' if $cpu =~ m/^Opteron/;
-
- if (qemu_machine_feature_enabled ($machine_type, $kvmver, 2, 3)) {
-
- push @$cpuFlags , '+kvm_pv_unhalt' if $kvm;
- push @$cpuFlags , '+kvm_pv_eoi' if $kvm;
- }
-
- add_hyperv_enlightenments($cpuFlags, $winversion, $machine_type, $kvmver, $conf->{bios}, $gpu_passthrough) if $kvm;
-
- push @$cpuFlags, 'enforce' if $cpu ne 'host' && $kvm;
-
- push @$cpuFlags, 'kvm=off' if $kvm_off;
-
- my $cpu_vendor = $cpu_vendor_list->{$cpu} ||
- die "internal error"; # should not happen
-
- push @$cpuFlags, "vendor=${cpu_vendor}"
- if $cpu_vendor ne 'default';
-
- $cpu .= "," . join(',', @$cpuFlags) if scalar(@$cpuFlags);
-
- push @$cmd, '-cpu', $cpu;
+ push @$cmd, get_cpu_options($conf, $arch, $kvm, $machine_type, $kvm_off, $kvmver, $winversion, $gpu_passthrough);
PVE::QemuServer::Memory::config($conf, $vmid, $sockets, $cores, $defaults, $hotplug_features, $cmd);
if (parse_guest_agent($conf)->{enabled}) {
my $qgasocket = qmp_socket($vmid, 1);
- my $pciaddr = print_pci_addr("qga0", $bridges);
+ my $pciaddr = print_pci_addr("qga0", $bridges, $arch, $machine_type);
push @$devices, '-chardev', "socket,path=$qgasocket,server,nowait,id=qga0";
push @$devices, '-device', "virtio-serial,id=qga0$pciaddr";
push @$devices, '-device', 'virtserialport,chardev=qga0,name=org.qemu.guest_agent.0';
if ($qxlnum > 1) {
if ($winversion){
for(my $i = 1; $i < $qxlnum; $i++){
- push @$devices, '-device', print_vga_device($conf, $vga, $i, $qxlnum, $bridges);
+ push @$devices, '-device', print_vga_device($conf, $vga, $arch, $machine_type, $i, $qxlnum, $bridges);
}
} else {
# assume other OS works like Linux
}
}
- my $pciaddr = print_pci_addr("spice", $bridges);
+ my $pciaddr = print_pci_addr("spice", $bridges, $arch, $machine_type);
my $nodename = PVE::INotify::nodename();
my $pfamily = PVE::Tools::get_host_address_family($nodename);
# enable balloon by default, unless explicitly disabled
if (!defined($conf->{balloon}) || $conf->{balloon}) {
- $pciaddr = print_pci_addr("balloon0", $bridges);
+ $pciaddr = print_pci_addr("balloon0", $bridges, $arch, $machine_type);
push @$devices, '-device', "virtio-balloon-pci,id=balloon0$pciaddr";
}
if ($conf->{watchdog}) {
my $wdopts = parse_watchdog($conf->{watchdog});
- $pciaddr = print_pci_addr("watchdog", $bridges);
+ $pciaddr = print_pci_addr("watchdog", $bridges, $arch, $machine_type);
my $watchdog = $wdopts->{model} || 'i6300esb';
push @$devices, '-device', "$watchdog$pciaddr";
push @$devices, '-watchdog-action', $wdopts->{action} if $wdopts->{action};
my ($maxdev, $controller, $controller_prefix) = scsihw_infos($conf, $drive);
- $pciaddr = print_pci_addr("$controller_prefix$controller", $bridges);
+ $pciaddr = print_pci_addr("$controller_prefix$controller", $bridges, $arch, $machine_type);
my $scsihw_type = $scsihw =~ m/^virtio-scsi-single/ ? "virtio-scsi-pci" : $scsihw;
my $iothread = '';
if ($drive->{interface} eq 'sata') {
my $controller = int($drive->{index} / $MAX_SATA_DISKS);
- $pciaddr = print_pci_addr("ahci$controller", $bridges);
+ $pciaddr = print_pci_addr("ahci$controller", $bridges, $arch, $machine_type);
push @$devices, '-device', "ahci,id=ahci$controller,multifunction=on$pciaddr" if !$ahcicontroller->{$controller};
$ahcicontroller->{$controller}=1;
}
my $drive_cmd = print_drive_full($storecfg, $vmid, $drive);
push @$devices, '-drive',$drive_cmd;
- push @$devices, '-device', print_drivedevice_full($storecfg, $conf, $vmid, $drive, $bridges);
+ push @$devices, '-device', print_drivedevice_full($storecfg, $conf, $vmid, $drive, $bridges, $arch, $machine_type);
});
for (my $i = 0; $i < $MAX_NETS; $i++) {
$bootindex_hash->{n} += 1;
}
- my $netdevfull = print_netdev_full($vmid,$conf,$d,"net$i");
+ my $netdevfull = print_netdev_full($vmid, $conf, $arch, $d, "net$i");
push @$devices, '-netdev', $netdevfull;
- my $netdevicefull = print_netdevice_full($vmid, $conf, $d, "net$i", $bridges, $use_old_bios_files);
+ my $netdevicefull = print_netdevice_full($vmid, $conf, $d, "net$i", $bridges, $use_old_bios_files, $arch, $machine_type);
push @$devices, '-device', $netdevicefull;
}
$bridges->{3} = 1 if $scsihw =~ m/^virtio-scsi-single/;
while (my ($k, $v) = each %$bridges) {
- $pciaddr = print_pci_addr("pci.$k");
+ $pciaddr = print_pci_addr("pci.$k", undef, $arch, $machine_type);
unshift @$devices, '-device', "pci-bridge,id=pci.$k,chassis_nr=$k$pciaddr" if $k > 0;
}
}
- # add custom args
- if ($conf->{args}) {
- my $aa = PVE::Tools::split_args($conf->{args});
- push @$cmd, @$aa;
- }
-
push @$cmd, @$devices;
push @$cmd, '-rtc', join(',', @$rtcFlags)
if scalar(@$rtcFlags);
push @$cmd, '-global', join(',', @$globalFlags)
if scalar(@$globalFlags);
+ # add custom args
+ if ($conf->{args}) {
+ my $aa = PVE::Tools::split_args($conf->{args});
+ push @$cmd, @$aa;
+ }
+
return wantarray ? ($cmd, $vollist, $spice_port) : $cmd;
}
}
sub vm_deviceplug {
- my ($storecfg, $conf, $vmid, $deviceid, $device) = @_;
+ my ($storecfg, $conf, $vmid, $deviceid, $device, $arch, $machine_type) = @_;
my $q35 = machine_type_is_q35($conf);
my $devices_list = vm_devices_list($vmid);
return 1 if defined($devices_list->{$deviceid});
- qemu_add_pci_bridge($storecfg, $conf, $vmid, $deviceid); # add PCI bridge if we need it for the device
+ qemu_add_pci_bridge($storecfg, $conf, $vmid, $deviceid, $arch, $machine_type); # add PCI bridge if we need it for the device
if ($deviceid eq 'tablet') {
- qemu_deviceadd($vmid, print_tabletdevice_full($conf));
+ qemu_deviceadd($vmid, print_tabletdevice_full($conf, $arch));
+
+ } elsif ($deviceid eq 'keyboard') {
+
+ qemu_deviceadd($vmid, print_keyboarddevice_full($conf, $arch));
} elsif ($deviceid =~ m/^usb(\d+)$/) {
qemu_iothread_add($vmid, $deviceid, $device);
qemu_driveadd($storecfg, $vmid, $device);
- my $devicefull = print_drivedevice_full($storecfg, $conf, $vmid, $device);
+ my $devicefull = print_drivedevice_full($storecfg, $conf, $vmid, $device, $arch, $machine_type);
qemu_deviceadd($vmid, $devicefull);
eval { qemu_deviceaddverify($vmid, $deviceid); };
my $scsihw = defined($conf->{scsihw}) ? $conf->{scsihw} : "lsi";
- my $pciaddr = print_pci_addr($deviceid);
+ my $pciaddr = print_pci_addr($deviceid, undef, $arch, $machine_type);
my $scsihw_type = $scsihw eq 'virtio-scsi-single' ? "virtio-scsi-pci" : $scsihw;
my $devicefull = "$scsihw_type,id=$deviceid$pciaddr";
} elsif ($deviceid =~ m/^(scsi)(\d+)$/) {
- qemu_findorcreatescsihw($storecfg,$conf, $vmid, $device);
+ qemu_findorcreatescsihw($storecfg,$conf, $vmid, $device, $arch, $machine_type);
qemu_driveadd($storecfg, $vmid, $device);
- my $devicefull = print_drivedevice_full($storecfg, $conf, $vmid, $device);
+ my $devicefull = print_drivedevice_full($storecfg, $conf, $vmid, $device, $arch, $machine_type);
eval { qemu_deviceadd($vmid, $devicefull); };
if (my $err = $@) {
eval { qemu_drivedel($vmid, $deviceid); };
} elsif ($deviceid =~ m/^(net)(\d+)$/) {
- return undef if !qemu_netdevadd($vmid, $conf, $device, $deviceid);
+ return undef if !qemu_netdevadd($vmid, $conf, $arch, $device, $deviceid);
my $machine_type = PVE::QemuServer::qemu_machine_pxe($vmid, $conf);
my $use_old_bios_files = undef;
($use_old_bios_files, $machine_type) = qemu_use_old_bios_files($machine_type);
- my $netdevicefull = print_netdevice_full($vmid, $conf, $device, $deviceid, undef, $use_old_bios_files);
+ my $netdevicefull = print_netdevice_full($vmid, $conf, $device, $deviceid, undef, $use_old_bios_files, $arch, $machine_type);
qemu_deviceadd($vmid, $netdevicefull);
eval { qemu_deviceaddverify($vmid, $deviceid); };
if (my $err = $@) {
} elsif (!$q35 && $deviceid =~ m/^(pci\.)(\d+)$/) {
my $bridgeid = $2;
- my $pciaddr = print_pci_addr($deviceid);
+ my $pciaddr = print_pci_addr($deviceid, undef, $arch, $machine_type);
my $devicefull = "pci-bridge,id=pci.$bridgeid,chassis_nr=$bridgeid$pciaddr";
qemu_deviceadd($vmid, $devicefull);
die "can't unplug bootdisk" if $conf->{bootdisk} && $conf->{bootdisk} eq $deviceid;
- if ($deviceid eq 'tablet') {
+ if ($deviceid eq 'tablet' || $deviceid eq 'keyboard') {
qemu_devicedel($vmid, $deviceid);
}
sub qemu_findorcreatescsihw {
- my ($storecfg, $conf, $vmid, $device) = @_;
+ my ($storecfg, $conf, $vmid, $device, $arch, $machine_type) = @_;
my ($maxdev, $controller, $controller_prefix) = scsihw_infos($conf, $device);
my $devices_list = vm_devices_list($vmid);
if(!defined($devices_list->{$scsihwid})) {
- vm_deviceplug($storecfg, $conf, $vmid, $scsihwid, $device);
+ vm_deviceplug($storecfg, $conf, $vmid, $scsihwid, $device, $arch, $machine_type);
}
return 1;
}
sub qemu_add_pci_bridge {
- my ($storecfg, $conf, $vmid, $device) = @_;
+ my ($storecfg, $conf, $vmid, $device, $arch, $machine_type) = @_;
my $bridges = {};
my $bridgeid;
- print_pci_addr($device, $bridges);
+ print_pci_addr($device, $bridges, $arch, $machine_type);
while (my ($k, $v) = each %$bridges) {
$bridgeid = $k;
my $devices_list = vm_devices_list($vmid);
if (!defined($devices_list->{$bridge})) {
- vm_deviceplug($storecfg, $conf, $vmid, $bridge);
+ vm_deviceplug($storecfg, $conf, $vmid, $bridge, $arch, $machine_type);
}
return 1;
}
sub qemu_netdevadd {
- my ($vmid, $conf, $device, $deviceid) = @_;
+ my ($vmid, $conf, $arch, $device, $deviceid) = @_;
- my $netdev = print_netdev_full($vmid, $conf, $device, $deviceid, 1);
+ my $netdev = print_netdev_full($vmid, $conf, $arch, $device, $deviceid, 1);
my %options = split(/[=,]/, $netdev);
vm_mon_cmd($vmid, "netdev_add", %options);
}
sub qemu_usb_hotplug {
- my ($storecfg, $conf, $vmid, $deviceid, $device) = @_;
+ my ($storecfg, $conf, $vmid, $deviceid, $device, $arch, $machine_type) = @_;
return if !$device;
my $devicelist = vm_devices_list($vmid);
if (!$devicelist->{xhci}) {
- my $pciaddr = print_pci_addr("xhci");
+ my $pciaddr = print_pci_addr("xhci", undef, $arch, $machine_type);
qemu_deviceadd($vmid, "nec-usb-xhci,id=xhci$pciaddr");
}
}
$d->{usb3} = $device->{usb3};
# add the new one
- vm_deviceplug($storecfg, $conf, $vmid, $deviceid, $d);
+ vm_deviceplug($storecfg, $conf, $vmid, $deviceid, $d, $arch, $machine_type);
}
sub qemu_cpu_hotplug {
my ($vmid, $conf, $storecfg, $selection, $errors) = @_;
my $defaults = load_defaults();
+ my ($arch, $machine_type) = get_basic_machine_info($conf, undef);
# commit values which do not have any impact on running VM first
# Note: those option cannot raise errors, we we do not care about
} elsif ($opt eq 'tablet') {
die "skip\n" if !$hotplug_features->{usb};
if ($defaults->{tablet}) {
- vm_deviceplug($storecfg, $conf, $vmid, $opt);
+ vm_deviceplug($storecfg, $conf, $vmid, 'tablet', $arch, $machine_type);
+ vm_deviceplug($storecfg, $conf, $vmid, 'keyboard', $arch, $machine_type)
+ if $arch eq 'aarch64';
} else {
- vm_deviceunplug($vmid, $conf, $opt);
+ vm_deviceunplug($vmid, $conf, 'tablet');
+ vm_deviceunplug($vmid, $conf, 'keyboard') if $arch eq 'aarch64';
}
} elsif ($opt =~ m/^usb\d+/) {
die "skip\n";
} elsif ($opt eq 'tablet') {
die "skip\n" if !$hotplug_features->{usb};
if ($value == 1) {
- vm_deviceplug($storecfg, $conf, $vmid, $opt);
+ vm_deviceplug($storecfg, $conf, $vmid, 'tablet', $arch, $machine_type);
+ vm_deviceplug($storecfg, $conf, $vmid, 'keyboard', $arch, $machine_type)
+ if $arch eq 'aarch64';
} elsif ($value == 0) {
- vm_deviceunplug($vmid, $conf, $opt);
+ vm_deviceunplug($vmid, $conf, 'tablet');
+ vm_deviceunplug($vmid, $conf, 'keyboard') if $arch eq 'aarch64';
}
} elsif ($opt =~ m/^usb\d+$/) {
die "skip\n";
die "skip\n" if !$hotplug_features->{usb} || $value =~ m/spice/i;
my $d = eval { PVE::JSONSchema::parse_property_string($usbdesc->{format}, $value) };
die "skip\n" if !$d;
- qemu_usb_hotplug($storecfg, $conf, $vmid, $opt, $d);
+ qemu_usb_hotplug($storecfg, $conf, $vmid, $opt, $d, $arch, $machine_type);
} elsif ($opt eq 'vcpus') {
die "skip\n" if !$hotplug_features->{cpu};
qemu_cpu_hotplug($vmid, $conf, $value);
} elsif ($opt =~ m/^net(\d+)$/) {
# some changes can be done without hotplug
vmconfig_update_net($storecfg, $conf, $hotplug_features->{network},
- $vmid, $opt, $value);
+ $vmid, $opt, $value, $arch, $machine_type);
} elsif (is_valid_drivename($opt)) {
# some changes can be done without hotplug
my $drive = parse_drive($opt, $value);
&$apply_pending_cloudinit($opt, $value);
}
vmconfig_update_disk($storecfg, $conf, $hotplug_features->{disk},
- $vmid, $opt, $value, 1);
+ $vmid, $opt, $value, 1, $arch, $machine_type);
} elsif ($opt =~ m/^memory$/) { #dimms
die "skip\n" if !$hotplug_features->{memory};
$value = PVE::QemuServer::Memory::qemu_memory_hotplug($vmid, $conf, $defaults, $opt, $value);
};
sub vmconfig_update_net {
- my ($storecfg, $conf, $hotplug, $vmid, $opt, $value) = @_;
+ my ($storecfg, $conf, $hotplug, $vmid, $opt, $value, $arch, $machine_type) = @_;
my $newnet = parse_net($value);
}
if ($hotplug) {
- vm_deviceplug($storecfg, $conf, $vmid, $opt, $newnet);
+ vm_deviceplug($storecfg, $conf, $vmid, $opt, $newnet, $arch, $machine_type);
} else {
die "skip\n";
}
}
sub vmconfig_update_disk {
- my ($storecfg, $conf, $hotplug, $vmid, $opt, $value, $force) = @_;
+ my ($storecfg, $conf, $hotplug, $vmid, $opt, $value, $force, $arch, $machine_type) = @_;
# fixme: do we need force?
die "skip\n" if !$hotplug || $opt =~ m/(ide|sata)(\d+)/;
# hotplug new disks
PVE::Storage::activate_volumes($storecfg, [$drive->{file}]) if $drive->{file} !~ m|^/dev/.+|;
- vm_deviceplug($storecfg, $conf, $vmid, $opt, $drive);
+ vm_deviceplug($storecfg, $conf, $vmid, $opt, $drive, $arch, $machine_type);
}
sub vm_start {
next if !$d;
my $pcidevices = $d->{pciid};
foreach my $pcidevice (@$pcidevices) {
- my $pciid = $pcidevice->{id}.".".$pcidevice->{function};
+ my $pciid = $pcidevice->{id};
- my $info = pci_device_info("0000:$pciid");
- die "IOMMU not present\n" if !check_iommu_support();
+ my $info = PVE::SysFSTools::pci_device_info("0000:$pciid");
+ die "IOMMU not present\n" if !PVE::SysFSTools::check_iommu_support();
die "no pci device info for device '$pciid'\n" if !$info;
- die "can't unbind/bind pci group to vfio '$pciid'\n" if !pci_dev_group_bind_to_vfio($pciid);
- die "can't reset pci device '$pciid'\n" if $info->{has_fl_reset} and !pci_dev_reset($info);
+
+ if ($d->{mdev}) {
+ my $uuid = PVE::SysFSTools::generate_mdev_uuid($vmid, $i);
+ PVE::SysFSTools::pci_create_mdev_device($pciid, $uuid, $d->{mdev});
+ } else {
+ die "can't unbind/bind pci group to vfio '$pciid'\n"
+ if !PVE::SysFSTools::pci_dev_group_bind_to_vfio($pciid);
+ die "can't reset pci device '$pciid'\n"
+ if $info->{has_fl_reset} and !PVE::SysFSTools::pci_dev_reset($info);
+ }
}
}
}
sub vm_commandline {
- my ($storecfg, $vmid) = @_;
+ my ($storecfg, $vmid, $snapname) = @_;
my $conf = PVE::QemuConfig->load_config($vmid);
+ if ($snapname) {
+ my $snapshot = $conf->{snapshots}->{$snapname};
+ die "snapshot '$snapname' does not exist\n"
+ if !defined($snapshot);
+ my $digest = $conf->{digest};
+
+ # we need the digest of the file
+ $snapshot->{digest} = $conf->{digest};
+ $conf = $snapshot;
+ }
+
my $defaults = load_defaults();
my $cmd = config_to_command($storecfg, $vmid, $conf, $defaults);
unlink "/var/run/qemu-server/${vmid}.$ext";
}
+ foreach my $key (keys %$conf) {
+ next if $key !~ m/^hostpci(\d+)$/;
+ my $hostpciindex = $1;
+ my $d = parse_hostpci($conf->{$key});
+ my $uuid = PVE::SysFSTools::generate_mdev_uuid($vmid, $hostpciindex);
+
+ foreach my $pci (@{$d->{pciid}}) {
+ my $pciid = $pci->{id};
+ PVE::SysFSTools::pci_cleanup_mdev_device($pciid, $uuid);
+ }
+ }
+
vmconfig_apply_pending($vmid, $conf, $storecfg) if $apply_pending_changes;
};
warn $@ if $@; # avoid errors - just warn
});
}
-# pci helpers
-
-sub file_write {
- my ($filename, $buf) = @_;
-
- my $fh = IO::File->new($filename, "w");
- return undef if !$fh;
-
- my $res = print $fh $buf;
-
- $fh->close();
-
- return $res;
-}
-
-sub pci_device_info {
- my ($name) = @_;
-
- my $res;
-
- return undef if $name !~ m/^([a-f0-9]{4}):([a-f0-9]{2}):([a-f0-9]{2})\.([a-f0-9])$/;
- my ($domain, $bus, $slot, $func) = ($1, $2, $3, $4);
-
- my $irq = file_read_firstline("$pcisysfs/devices/$name/irq");
- return undef if !defined($irq) || $irq !~ m/^\d+$/;
-
- my $vendor = file_read_firstline("$pcisysfs/devices/$name/vendor");
- return undef if !defined($vendor) || $vendor !~ s/^0x//;
-
- my $product = file_read_firstline("$pcisysfs/devices/$name/device");
- return undef if !defined($product) || $product !~ s/^0x//;
-
- $res = {
- name => $name,
- vendor => $vendor,
- product => $product,
- domain => $domain,
- bus => $bus,
- slot => $slot,
- func => $func,
- irq => $irq,
- has_fl_reset => -f "$pcisysfs/devices/$name/reset" || 0,
- };
-
- return $res;
-}
-
-sub pci_dev_reset {
- my ($dev) = @_;
-
- my $name = $dev->{name};
-
- my $fn = "$pcisysfs/devices/$name/reset";
-
- return file_write($fn, "1");
-}
-
-sub pci_dev_bind_to_vfio {
- my ($dev) = @_;
-
- my $name = $dev->{name};
-
- my $vfio_basedir = "$pcisysfs/drivers/vfio-pci";
-
- if (!-d $vfio_basedir) {
- system("/sbin/modprobe vfio-pci >/dev/null 2>/dev/null");
- }
- die "Cannot find vfio-pci module!\n" if !-d $vfio_basedir;
-
- my $testdir = "$vfio_basedir/$name";
- return 1 if -d $testdir;
-
- my $data = "$dev->{vendor} $dev->{product}";
- return undef if !file_write("$vfio_basedir/new_id", $data);
-
- my $fn = "$pcisysfs/devices/$name/driver/unbind";
- if (!file_write($fn, $name)) {
- return undef if -f $fn;
- }
-
- $fn = "$vfio_basedir/bind";
- if (! -d $testdir) {
- return undef if !file_write($fn, $name);
- }
-
- return -d $testdir;
-}
-
-sub pci_dev_group_bind_to_vfio {
- my ($pciid) = @_;
-
- my $vfio_basedir = "$pcisysfs/drivers/vfio-pci";
-
- if (!-d $vfio_basedir) {
- system("/sbin/modprobe vfio-pci >/dev/null 2>/dev/null");
- }
- die "Cannot find vfio-pci module!\n" if !-d $vfio_basedir;
-
- # get IOMMU group devices
- opendir(my $D, "$pcisysfs/devices/0000:$pciid/iommu_group/devices/") || die "Cannot open iommu_group: $!\n";
- my @devs = grep /^0000:/, readdir($D);
- closedir($D);
-
- foreach my $pciid (@devs) {
- $pciid =~ m/^([:\.\da-f]+)$/ or die "PCI ID $pciid not valid!\n";
-
- # pci bridges, switches or root ports are not supported
- # they have a pci_bus subdirectory so skip them
- next if (-e "$pcisysfs/devices/$pciid/pci_bus");
-
- my $info = pci_device_info($1);
- pci_dev_bind_to_vfio($info) || die "Cannot bind $pciid to vfio\n";
- }
-
- return 1;
-}
-
# vzdump restore implementaion
sub tar_archive_read_firstfile {
my $name = undef;
if (drive_is_cloudinit($drive)) {
$name = "vm-$newvmid-cloudinit";
+ $snapname = undef;
# cloudinit only supports raw and qcow2 atm:
if ($dst_format eq 'qcow2') {
$name .= '.qcow2';
my $current_major;
my $current_minor;
- if ($machine && $machine =~ m/^(pc(-i440fx|-q35)?-(\d+)\.(\d+))/) {
+ if ($machine && $machine =~ m/^((?:pc(-i440fx|-q35)?|virt)-(\d+)\.(\d+))/) {
$current_major = $3;
$current_minor = $4;
return ($use_old_bios_files, $machine_type);
}
-sub create_efidisk {
- my ($storecfg, $storeid, $vmid, $fmt) = @_;
+sub create_efidisk($$$$$) {
+ my ($storecfg, $storeid, $vmid, $fmt, $arch) = @_;
- die "EFI vars default image not found\n" if ! -f $OVMF_VARS;
+ my (undef, $ovmf_vars) = get_ovmf_files($arch);
+ die "EFI vars default image not found\n" if ! -f $ovmf_vars;
- my $vars_size = PVE::Tools::convert_size(-s $OVMF_VARS, 'b' => 'kb');
+ my $vars_size = PVE::Tools::convert_size(-s $ovmf_vars, 'b' => 'kb');
my $volid = PVE::Storage::vdisk_alloc($storecfg, $storeid, $vmid, $fmt, undef, $vars_size);
PVE::Storage::activate_volumes($storecfg, [$volid]);
my $path = PVE::Storage::path($storecfg, $volid);
eval {
- run_command(['/usr/bin/qemu-img', 'convert', '-n', '-f', 'raw', '-O', $fmt, $OVMF_VARS, $path]);
+ run_command(['/usr/bin/qemu-img', 'convert', '-n', '-f', 'raw', '-O', $fmt, $ovmf_vars, $path]);
};
die "Copying EFI vars image failed: $@" if $@;
return ($volid, $vars_size);
}
-sub lspci {
-
- my $devices = {};
-
- dir_glob_foreach("$pcisysfs/devices", '[a-f0-9]{4}:([a-f0-9]{2}:[a-f0-9]{2})\.([0-9])', sub {
- my (undef, $id, $function) = @_;
- my $res = { id => $id, function => $function};
- push @{$devices->{$id}}, $res;
- });
-
- # Entries should be sorted by functions.
- foreach my $id (keys %$devices) {
- my $dev = $devices->{$id};
- $devices->{$id} = [ sort { $a->{function} <=> $b->{function} } @$dev ];
- }
-
- return $devices;
-}
-
sub vm_iothreads_list {
my ($vmid) = @_;
}
sub add_hyperv_enlightenments {
- my ($cpuFlags, $winversion, $machine_type, $kvmver, $bios, $gpu_passthrough) = @_;
+ my ($cpuFlags, $winversion, $machine_type, $kvmver, $bios, $gpu_passthrough, $hv_vendor_id) = @_;
return if $winversion < 6;
return if $bios && $bios eq 'ovmf' && $winversion < 8;
- push @$cpuFlags , 'hv_vendor_id=proxmox' if $gpu_passthrough;
+ if ($gpu_passthrough || defined($hv_vendor_id)) {
+ $hv_vendor_id //= 'proxmox';
+ push @$cpuFlags , "hv_vendor_id=$hv_vendor_id";
+ }
if (qemu_machine_feature_enabled ($machine_type, $kvmver, 2, 3)) {
push @$cpuFlags , 'hv_spinlocks=0x1fff';
projects / qemu-server.git / blobdiff