qemu.git
5 years agoOpen 2.0 development tree master origin/master
Anthony Liguori [Wed, 27 Nov 2013 22:02:45 +0000 (14:02 -0800)]
Open 2.0 development tree

Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoUpdate version for 1.7.0 release v1.7.0
Anthony Liguori [Wed, 27 Nov 2013 19:30:46 +0000 (11:30 -0800)]
Update version for 1.7.0 release

Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoqemu-iotests: Fix test 041
Max Reitz [Mon, 25 Nov 2013 19:28:56 +0000 (20:28 +0100)]
qemu-iotests: Fix test 041

Performing multiple drive-mirror blockjobs on the same qemu instance
results in the image file used for the block device being replaced by
the newly mirrored file, which is not what we want.

Fix this by performing one dedicated test per sync mode.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1385407736-13941-3-git-send-email-mreitz@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoblock/drive-mirror: Reuse backing HD for sync=none
Max Reitz [Mon, 25 Nov 2013 19:28:55 +0000 (20:28 +0100)]
block/drive-mirror: Reuse backing HD for sync=none

For "none" sync mode in "absolute-paths" mode, the current image should
be used as the backing file for the newly created image.

The current behavior is:
a) If the image to be mirrored has a backing file, use that (which is
   wrong, since the operations recorded by "none" are applied to the
   image itself, not to its backing file).
b) If the image to be mirrored lacks a backing file, the target doesn't
   have one either (which is not really wrong, but not really right,
   either; "none" records a set of operations executed on the image
   file, therefore having no backing file to apply these operations on
   seems rather pointless).

For a, this is clearly a bugfix. For b, it is still a bugfix, although
it might break existing API - but since that case crashed qemu just
three weeks ago (before 1452686495922b81d6cf43edf025c1aef15965c0), we
can safely assume there is no such API relying on that case yet.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1385407736-13941-2-git-send-email-mreitz@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoUpdate version for v1.7.0-rc2 release v1.7.0-rc2
Anthony Liguori [Tue, 26 Nov 2013 04:37:12 +0000 (20:37 -0800)]
Update version for v1.7.0-rc2 release

5 years agocurses: fixup SIGWINCH handler mess
Gerd Hoffmann [Fri, 22 Nov 2013 14:35:03 +0000 (15:35 +0100)]
curses: fixup SIGWINCH handler mess

Don't run code in the signal handler, only set a flag.
Use sigaction(2) to avoid non-portable signal(2) semantics.
Make #ifdefs less messy.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1385130903-20531-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoqga: Fix two format strings for MinGW
Stefan Weil [Mon, 25 Nov 2013 19:54:17 +0000 (20:54 +0100)]
qga: Fix two format strings for MinGW

Both code locations cause a compiler warning. Using "%s" instead of "%lu"
would result in a program crash if the wrong code were executed.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1385409257-2522-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoPPC: BookE: Make FIT/WDT timers at best millisecond grained
Alexander Graf [Mon, 25 Nov 2013 21:46:55 +0000 (22:46 +0100)]
PPC: BookE: Make FIT/WDT timers at best millisecond grained

The default granularity for the FIT timer on 440 is on every 0x1000th
transition of TB from 0 to 1. Translated that means 48828 times a second.

Since interrupts are quite expensive for 440 and we don't really care
about the accuracy of the FIT to that significance, let's force FIT and
WDT to at best millisecond granularity.

This basically restores behavior as it was in QEMU 1.6, where timers
could only deal with millisecond granularities at all.

This patch greatly improves performance with the 440 target and restores
roughly the same performance level that QEMU 1.6 had for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 1385416015-22775-3-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoPPC: Make BookE FIT/WDT timers more lazy
Alexander Graf [Mon, 25 Nov 2013 21:46:54 +0000 (22:46 +0100)]
PPC: Make BookE FIT/WDT timers more lazy

Today we fire FIT and WDT timer events every time the respective bit
position in TB flips from 0 -> 1.

However, there is no need to do this if the end result would be that
we're changing a TSR bit that is set to 1 to 1 again. No guest visible
change would have occured.

So whenever we see that the TSR bit to our timer is already set, don't
even bother to update the timer that would potentially fire it off.

However, we do need to make sure that we update our timer that notifies
us of the TB flip when the respective TSR bit gets unset. In that case
we do care about the flip and need to notify the guest again. So add
a callback into our timer handlers when TSR bits get unset.

This improves performance for me when the guest is busy processing things.

Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 1385416015-22775-2-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoacpi-build: fix support for glib < 2.22
Michael S. Tsirkin [Mon, 25 Nov 2013 22:00:39 +0000 (00:00 +0200)]
acpi-build: fix support for glib < 2.22

glib < 2.22 does not have g_array_get_element_size,
limit it's use (to check all elements are 1 byte
in size) to newer glib.

This fixes build on RHEL 5.3.

Reported-by: Richard Henderson <rth@redhat.com>
Reported-by: Erik Rull <erik.rull@rdsoftware.de>
Tested-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20131125220039.GA16386@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoMerge remote-tracking branch 'mst/tags/for_anthony' into staging
Anthony Liguori [Mon, 25 Nov 2013 17:49:42 +0000 (09:49 -0800)]
Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pc very last minute fixes for 1.7

This has a fix for a crasher bug with pci bridges,
boot failure fix for s390 on 32 bit hosts,
and fixes build for hosts with old glib.

There's also a fix for --iasl configure flag - it can be used
to work around broken iasl on some systems either
by using a non-standard iasl or by disabling it.

I've also reverted a e1000/rtl mac programming change
that seems slightly wrong and too risky for 1.8.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 25 Nov 2013 03:40:07 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Michael S. Tsirkin (5) and Bandan Das (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  configure: make --iasl option actually work
  Revert "e1000/rtl8139: update HMP NIC when every bit is written"
  acpi-build: fix build on glib < 2.14
  acpi-build: fix build on glib < 2.22
  pci: unregister vmstate_pcibus on unplug
  s390x: fix flat file load on 32 bit systems

Message-id: 1385379990-32093-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoMerge remote-tracking branch 'bonzini/tags/for-anthony' into staging
Anthony Liguori [Mon, 25 Nov 2013 17:41:24 +0000 (09:41 -0800)]
Merge remote-tracking branch 'bonzini/tags/for-anthony' into staging

Here are a bunch of 1.7-tagged patches that I was afraid
were getting forgotten or that did not have a clear maintainer responsible
for making a pull request.

# gpg: Signature made Thu 21 Nov 2013 08:40:59 AM PST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found

# By Peter Maydell (3) and others
# Via Paolo Bonzini
* bonzini/tags/for-anthony:
  qga: Fix compiler warnings (missing format attribute, wrong format strings)
  mips jazz: do not raise data bus exception when accessing invalid addresses
  target-i386: yield to another VCPU on PAUSE
  rng-egd: offset the point when repeatedly read from the buffer
  rng-egd: remove redundant free
  target-i386: Fix build by providing stub kvm_arch_get_supported_cpuid()
  vfio-pci: Fix multifunction=on
  atomic.h: Fix build with clang
  pc: get rid of builtin pvpanic for "-M pc-1.5"
  configure: Explicitly set ARFLAGS so we can build with GNU Make 4.0
  sun4m: Add FCode ROM for TCX framebuffer

Message-id: 1385052578-32352-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoMerge remote-tracking branch 'mdroth/qga-pull-2013-11-22' into staging
Anthony Liguori [Mon, 25 Nov 2013 17:37:44 +0000 (09:37 -0800)]
Merge remote-tracking branch 'mdroth/qga-pull-2013-11-22' into staging

# By Tomoki Sekiyama
# Via Michael Roth
* mdroth/qga-pull-2013-11-22:
  qemu-ga: vss-win32: Install VSS provider COM+ application service

Message-id: 1385154505-15145-1-git-send-email-mdroth@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoMerge remote-tracking branch 'stefanha/net' into staging
Anthony Liguori [Mon, 25 Nov 2013 17:37:27 +0000 (09:37 -0800)]
Merge remote-tracking branch 'stefanha/net' into staging

# By Vlad Yasevich
# Via Stefan Hajnoczi
* stefanha/net:
  qdev-properties-system.c: Allow vlan or netdev for -device, not both

Message-id: 1385118544-28482-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoconfigure: make --iasl option actually work
Michael S. Tsirkin [Sun, 24 Nov 2013 09:38:05 +0000 (11:38 +0200)]
configure: make --iasl option actually work

--iasl option was added to CC option parsing section by mistake,
it's not effective there and attempts to use cause
an 'unknown option' error.

Fix this up.

Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
5 years agoqemu-ga: vss-win32: Install VSS provider COM+ application service
Tomoki Sekiyama [Fri, 1 Nov 2013 21:47:25 +0000 (17:47 -0400)]
qemu-ga: vss-win32: Install VSS provider COM+ application service

Currently, qemu-ga for Windows fails to execute guset-fsfreeze-freeze when
no user is logging in to Windows, with an error message:
  {"error":{"class":"GenericError",
            "desc":"failed to add C:\\ to snapshotset:  (error: 8004230f)"}}

To enable guest-fsfreeze-freeze/thaw without logging in users, this installs
a service to execute qemu-ga VSS provider COM+ application that has full
access privileges to the local system. The service will automatically be
removed when the COM+ application is deregistered.

This patch replaces ICOMAdminCatalog interface with ICOMAdminCatalog2
interface that contains CreateServiceForApplication() method in addition.

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Tested-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
5 years agoqdev-properties-system.c: Allow vlan or netdev for -device, not both
Vlad Yasevich [Fri, 8 Nov 2013 02:13:09 +0000 (21:13 -0500)]
qdev-properties-system.c: Allow vlan or netdev for -device, not both

It is currently possible to specify things like:
-device e1000,netdev=foo,vlan=1
With this usage, whichever argument was specified last (vlan or netdev)
overwrites what was previousely set and results in a non-working
configuration.  Even worse, when used with multiqueue devices,
it causes a segmentation fault on exit in qemu_free_net_client.

That patch treates the above command line options as invalid and
generates an error at start-up.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
5 years agoqga: Fix compiler warnings (missing format attribute, wrong format strings)
Stefan Weil [Sun, 17 Nov 2013 18:19:52 +0000 (19:19 +0100)]
qga: Fix compiler warnings (missing format attribute, wrong format strings)

gcc 4.8.2 reports this warning when extra warnings are enabled (-Wextra):

  CC    qga/commands.o
qga/commands.c: In function ‘slog’:
qga/commands.c:28:5: error:
 function might be possible candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
     g_logv("syslog", G_LOG_LEVEL_INFO, fmt, ap);
     ^

gcc 4.8.2 reports this warning when slog is declared with the
gnu_printf format attribute:

qga/commands-posix.c: In function ‘qmp_guest_file_open’:
qga/commands-posix.c:404:5: warning:
 format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘int64_t’ [-Wformat=]
     slog("guest-file-open, handle: %d", handle);
     ^

On 32 bit hosts there are three more warnings which are also fixed here.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agomips jazz: do not raise data bus exception when accessing invalid addresses
Hervé Poussineau [Mon, 4 Nov 2013 22:26:17 +0000 (23:26 +0100)]
mips jazz: do not raise data bus exception when accessing invalid addresses

MIPS Jazz chipset doesn't seem to raise data bus exceptions on invalid accesses.
However, there is no easy way to prevent them. Creating a big memory region
for the whole address space doesn't prevent memory core to directly call
unassigned_mem_read/write which in turn call cpu->do_unassigned_access,
which (for MIPS CPU) raise an data bus exception.

This fixes a MIPS Jazz regression introduced in c658b94f6e8c206c59d02aa6fbac285b86b53d2c.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agotarget-i386: yield to another VCPU on PAUSE
Paolo Bonzini [Wed, 20 Nov 2013 11:54:02 +0000 (12:54 +0100)]
target-i386: yield to another VCPU on PAUSE

After commit b1bbfe7 (aio / timers: On timer modification, qemu_notify
or aio_notify, 2013-08-21) FreeBSD guests report a huge slowdown.

The problem shows up as soon as FreeBSD turns out its periodic (~1 ms)
tick, but the timers are only the trigger for a pre-existing problem.

Before the offending patch, setting a timer did a timer_settime system call.

After, setting the timer exits the event loop (which uses poll) and
reenters it with a new deadline.  This does not cause any slowdown; the
difference is between one system call (timer_settime and a signal
delivery (SIGALRM) before the patch, and two system calls afterwards
(write to a pipe or eventfd + calling poll again when re-entering the
event loop).

Unfortunately, the exit/enter causes the main loop to grab the iothread
lock, which in turns kicks the VCPU thread out of execution.  This
causes TCG to execute the next VCPU in its round-robin scheduling of
VCPUS.  When the second VCPU is mostly unused, FreeBSD runs a "pause"
instruction in its idle loop which only burns cycles without any
progress.  As soon as the timer tick expires, the first VCPU runs
the interrupt handler but very soon it sets it again---and QEMU
then goes back doing nothing in the second VCPU.

The fix is to make the pause instruction do "cpu_loop_exit".

Reported-by: Luigi Rizzo <rizzo@iet.unipi.it>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agorng-egd: offset the point when repeatedly read from the buffer
Amos Kong [Thu, 21 Nov 2013 08:42:51 +0000 (16:42 +0800)]
rng-egd: offset the point when repeatedly read from the buffer

The buffer content might be read out more than once, currently
we just repeatedly read the first data block, buffer offset is
missing.

Cc: qemu-stable@nongnu.org
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agorng-egd: remove redundant free
Amos Kong [Thu, 21 Nov 2013 08:42:50 +0000 (16:42 +0800)]
rng-egd: remove redundant free

We didn't set default chr_name, the free is redundant.

Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agotarget-i386: Fix build by providing stub kvm_arch_get_supported_cpuid()
Peter Maydell [Wed, 13 Nov 2013 23:09:07 +0000 (23:09 +0000)]
target-i386: Fix build by providing stub kvm_arch_get_supported_cpuid()

Fix build failures with clang when KVM is not enabled by
providing a stub version of kvm_arch_get_supported_cpuid().
We retain the compile time check that this function isn't
called when CONFIG_KVM is not set by guarding the stub with
ifndef __OPTIMIZE__ (we assume that an optimizing build will
do sufficient constant folding and dead code elimination to
remove the calls before linking).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agovfio-pci: Fix multifunction=on
Alex Williamson [Tue, 12 Nov 2013 18:53:24 +0000 (11:53 -0700)]
vfio-pci: Fix multifunction=on

When an assigned device is initialized it copies the device config
space into the emulated config space.  Unfortunately multifunction is
setup prior to the device initfn and gets clobbered.  We need to
restore it just like pci-assign does.

Cc: qemu-stable@nongnu.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoatomic.h: Fix build with clang
Peter Maydell [Tue, 22 Oct 2013 09:58:41 +0000 (10:58 +0100)]
atomic.h: Fix build with clang

clang defines __ATOMIC_SEQ_CST but its implementation of the
__atomic_exchange() builtin differs from that of gcc. Move the
__clang__ branch of the ifdef ladder to the top and fix its
implementation (there is no such builtin as __sync_exchange),
so we can compile with clang again.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agopc: get rid of builtin pvpanic for "-M pc-1.5"
Paolo Bonzini [Mon, 4 Nov 2013 13:30:48 +0000 (14:30 +0100)]
pc: get rid of builtin pvpanic for "-M pc-1.5"

This causes two slight backwards-incompatibilities between "-M pc-1.5"
and 1.5's "-M pc":

(1) a fw_cfg file is removed with this patch.  This is only a problem
if migration stops the virtual machine exactly during fw_cfg enumeration.

(2) after migration, a VM created without an explicit "-device pvpanic"
will stop reporting panics to management.

The first problem only occurs if migration is done at a very, very
early point (and I'm not sure it can happen in practice for reasonable-size
VMs, since it will likely take more time to send the RAM to destination,
than it will take for BIOS to scan fw_cfg).

The second problem only occurs if the guest panics _and_ has a guest
driver _and_ management knows to look at the crash event, so it is
mostly theoretical at this point in time.

Thus keep the code simple, and pretend it was never broken.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoconfigure: Explicitly set ARFLAGS so we can build with GNU Make 4.0
Peter Maydell [Mon, 21 Oct 2013 20:03:06 +0000 (21:03 +0100)]
configure: Explicitly set ARFLAGS so we can build with GNU Make 4.0

Our rules.mak adds '-rR' to MAKEFLAGS to indicate that we will be
explicitly specifying everything and not relying on any default
variables or rules. However we were accidentally relying on the
default ARFLAGS ("rv"). This went unnoticed because of a bug in
GNU Make 3.82 and earlier which meant that adding -rR to MAKEFLAGS
only affected submakes, not the currently running instance.
Explicitly set ARFLAGS in config-host.mak, in the same way we
handle CFLAGS and LDFLAGS; this will allow us to work with
Make 4.0.

Thanks to Paul Smith for analyzing this bug for us.

Cc: qemu-stable@nongnu.org
Reported-by: Ken Moffat <zarniwhoop@ntlworld.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agosun4m: Add FCode ROM for TCX framebuffer
Mark Cave-Ayland [Sat, 2 Nov 2013 16:03:50 +0000 (16:03 +0000)]
sun4m: Add FCode ROM for TCX framebuffer

Upstream OpenBIOS now implements SBus probing in order to determine the
contents of a physical bus slot, which is required to allow OpenBIOS to
identify the framebuffer without help from the fw_cfg interface.

SBus probing works by detecting the presence of an FCode program
(effectively tokenised Forth) at the base address of each slot, and if
present executes it so that it creates its own device node in the
OpenBIOS device tree.

The FCode ROM is generated as part of the OpenBIOS build and should
generally be updated at the same time.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoUpdate version for 1.7.0-rc1 release v1.7.0-rc1
Anthony Liguori [Thu, 21 Nov 2013 16:11:47 +0000 (08:11 -0800)]
Update version for 1.7.0-rc1 release

Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agovfio-pci: Fix multifunction=on
Alex Williamson [Tue, 12 Nov 2013 18:53:24 +0000 (11:53 -0700)]
vfio-pci: Fix multifunction=on

When an assigned device is initialized it copies the device config
space into the emulated config space.  Unfortunately multifunction is
setup prior to the device initfn and gets clobbered.  We need to
restore it just like pci-assign does.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Bandan Das <bsd@redhat.com>
Message-id: 20131112185059.7262.33780.stgit@bling.home
Cc: qemu-stable@nongnu.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agotarget-i386: Fix addr32 prefix in gen_lea_modrm
Richard Henderson [Tue, 12 Nov 2013 01:16:56 +0000 (11:16 +1000)]
target-i386: Fix addr32 prefix in gen_lea_modrm

Fix the following run-test-x86_64 testsuite failures:

-lea (%%eax) = 0000000000000001
-lea (%%ebx) = 0000000000000002
-lea (%%ecx) = 0000000000000004
-lea (%%edx) = 0000000000000008
-lea (%%esi) = 0000000000000010
-lea (%%edi) = 0000000000000020
+lea (%%eax) = 0000abcc00000001
+lea (%%ebx) = 0000abcf00000002
+lea (%%ecx) = 0000abc900000004
+lea (%%edx) = 0000abc500000008
+lea (%%esi) = 0000abdd00000010
+lea (%%edi) = 0000abed00000020

In addition, reduce ifdeffery and minimize the number of TCG ops
produced during address computation.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1384219016-5170-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoatomic.h: Fix build with clang
Peter Maydell [Tue, 22 Oct 2013 09:58:41 +0000 (10:58 +0100)]
atomic.h: Fix build with clang

clang defines __ATOMIC_SEQ_CST but its implementation of the
__atomic_exchange() builtin differs from that of gcc. Move the
__clang__ branch of the ifdef ladder to the top and fix its
implementation (there is no such builtin as __sync_exchange),
so we can compile with clang again.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1382435921-18438-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agotarget-i386: do not override nr_cores for -cpu host
Paolo Bonzini [Tue, 19 Nov 2013 16:49:46 +0000 (17:49 +0100)]
target-i386: do not override nr_cores for -cpu host

Commit 787aaf5 (target-i386: forward CPUID cache leaves when -cpu host is
used, 2013-09-02) brings bits 31..26 of CPUID leaf 04h out of sync with
the APIC IDs that QEMU reserves for each package.  This number must come
from "-smp" options rather than from the host CPUID.

It also turns out that this unsyncing makes Windows Server 2012R2 fail
to boot.

Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1384879786-6721-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agomips jazz: do not raise data bus exception when accessing invalid addresses
Hervé Poussineau [Mon, 4 Nov 2013 22:26:17 +0000 (23:26 +0100)]
mips jazz: do not raise data bus exception when accessing invalid addresses

MIPS Jazz chipset doesn't seem to raise data bus exceptions on invalid accesses.
However, there is no easy way to prevent them. Creating a big memory region
for the whole address space doesn't prevent memory core to directly call
unassigned_mem_read/write which in turn call cpu->do_unassigned_access,
which (for MIPS CPU) raise an data bus exception.

This fixes a MIPS Jazz regression introduced in c658b94f6e8c206c59d02aa6fbac285b86b53d2c.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1383603977-7003-1-git-send-email-hpoussin@reactos.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agotarget-i386: yield to another VCPU on PAUSE
Paolo Bonzini [Wed, 20 Nov 2013 11:54:02 +0000 (12:54 +0100)]
target-i386: yield to another VCPU on PAUSE

After commit b1bbfe7 (aio / timers: On timer modification, qemu_notify
or aio_notify, 2013-08-21) FreeBSD guests report a huge slowdown.

The problem shows up as soon as FreeBSD turns out its periodic (~1 ms)
tick, but the timers are only the trigger for a pre-existing problem.

Before the offending patch, setting a timer did a timer_settime system call.

After, setting the timer exits the event loop (which uses poll) and
reenters it with a new deadline.  This does not cause any slowdown; the
difference is between one system call (timer_settime and a signal
delivery (SIGALRM) before the patch, and two system calls afterwards
(write to a pipe or eventfd + calling poll again when re-entering the
event loop).

Unfortunately, the exit/enter causes the main loop to grab the iothread
lock, which in turns kicks the VCPU thread out of execution.  This
causes TCG to execute the next VCPU in its round-robin scheduling of
VCPUS.  When the second VCPU is mostly unused, FreeBSD runs a "pause"
instruction in its idle loop which only burns cycles without any
progress.  As soon as the timer tick expires, the first VCPU runs
the interrupt handler but very soon it sets it again---and QEMU
then goes back doing nothing in the second VCPU.

The fix is to make the pause instruction do "cpu_loop_exit".

Cc: Richard Henderson <rth@twiddle.net>
Reported-by: Luigi Rizzo <rizzo@iet.unipi.it>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1384948442-24217-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agorng-egd: offset the point when repeatedly read from the buffer
Amos Kong [Thu, 21 Nov 2013 08:42:51 +0000 (16:42 +0800)]
rng-egd: offset the point when repeatedly read from the buffer

The buffer content might be read out more than once, currently
we just repeatedly read the first data block, buffer offset is
missing.

Cc: qemu-stable@nongnu.org
Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1385023371-8198-3-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agorng-egd: remove redundant free
Amos Kong [Thu, 21 Nov 2013 08:42:50 +0000 (16:42 +0800)]
rng-egd: remove redundant free

We didn't set default chr_name, the free is redundant.

Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1385023371-8198-2-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agovirtio-rng: add check of period
Amos Kong [Thu, 21 Nov 2013 10:53:23 +0000 (18:53 +0800)]
virtio-rng: add check of period

If period is assigned to 0, limit timer will expire immediately.
It causes a qemu warning:

"main-loop: WARNING: I/O thread spun for 1000 iterations"

This limit is meaningless. This patch forbids to assign 0 to period.

Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1385031203-23790-1-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agos390x: fix flat file load on 32 bit systems
Michael S. Tsirkin [Thu, 21 Nov 2013 13:34:26 +0000 (15:34 +0200)]
s390x: fix flat file load on 32 bit systems

pc-bios/s390-zipl.rom is a flat image so it's expected that
loading it as elf will fail.
It should fall back on loading a flat file, but doesn't
on 32 bit systems, instead it fails printing:
    qemu: hardware error: could not load bootloader 's390-zipl.rom'

The result is boot failure.

The reason is that a 64 bit unsigned interger which is set
to -1 on error is compared to -1UL which on a 32 bit system
with gcc is a 32 bit unsigned interger.
Since both are unsigned, no sign extension takes place and
comparison evaluates to non-equal.

There's no reason to do clever tricks: all functions
we call actually return int so just use int.
And then we can use == -1 everywhere, consistently.

Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20131121133426.GA30827@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoacpi-build: fix build on glib < 2.14
Michael S. Tsirkin [Thu, 21 Nov 2013 12:17:54 +0000 (14:17 +0200)]
acpi-build: fix build on glib < 2.14

g_array_get_element_size was only added in glib 2.14.
Fortunately we don't use it for any arrays where
element size is > 1, so just add an assert.

Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1385036128-8753-2-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoacpi-build: fix build on glib < 2.22
Michael S. Tsirkin [Thu, 21 Nov 2013 12:17:51 +0000 (14:17 +0200)]
acpi-build: fix build on glib < 2.22

g_string_vprintf was only introduced in 2.24 so switch to vsnprintf
instead.  A bit uglier but name size is fixed at 4 bytes here so it's
easy.

Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1385036128-8753-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoMerge remote-tracking branch 'qemu-kvm/uq/master' into staging
Anthony Liguori [Thu, 21 Nov 2013 15:09:52 +0000 (07:09 -0800)]
Merge remote-tracking branch 'qemu-kvm/uq/master' into staging

# By Jan Kiszka (1) and others
# Via Gleb Natapov
* qemu-kvm/uq/master:
  kvm: Fix uninitialized cpuid_data
  pci-assign: Remove dead code for direct I/O region access from userspace
  KVM: x86: fix typo in KVM_GET_XCRS

Message-id: cover.1385040432.git.gleb@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoMerge remote-tracking branch 'jliu/or32' into staging
Anthony Liguori [Thu, 21 Nov 2013 15:08:47 +0000 (07:08 -0800)]
Merge remote-tracking branch 'jliu/or32' into staging

# By Sebastian Macke
# Via Jia Liu
* jliu/or32:
  target-openrisc: Correct carry flag check of l.addc and l.addic test cases
  target-openrisc: Correct memory bounds checking for the tlb buffers
  openrisc-timer: Reduce overhead, Separate clock update functions
  target-openrisc: Correct wrong epcr register in interrupt handler
  target-openrisc: Remove executable flag for every page
  target-openrisc: Remove unnecessary code generated by jump instructions
  target-openrisc: Speed up move instruction

Message-id: 1384958318-9145-1-git-send-email-proljc@gmail.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoMerge remote-tracking branch 'quintela/migration.next' into staging
Anthony Liguori [Thu, 21 Nov 2013 15:08:31 +0000 (07:08 -0800)]
Merge remote-tracking branch 'quintela/migration.next' into staging

# By Wangting (Kathy)
# Via Juan Quintela
* quintela/migration.next:
  The calculation of bytes_xfer in qemu_put_buffer() is wrong

Message-id: 1384946787-8190-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoRevert "e1000/rtl8139: update HMP NIC when every bit is written"
Michael S. Tsirkin [Mon, 18 Nov 2013 19:41:44 +0000 (21:41 +0200)]
Revert "e1000/rtl8139: update HMP NIC when every bit is written"

This reverts commit cd5be5829c1ce87aa6b3a7806524fac07ac9a757.
Digging into hardware specs shows this does not
actually make QEMU behave more like hardware:

There are valid arguments backed by the spec to indicate why the version
of e1000 prior to cd5be582 was more correct: the high byte actually
includes a valid bit, this is why all guests write it last.

For rtl8139 there's actually a separate undocumented valid bit, but we
don't implement it yet.

To summarize all the drivers we know about behave in one way
that allows us to make an assumption about write order and avoid
spurious, incorrect mac address updates to the monitor.

Let's stick to the tried heuristic for 1.7 and
possibly revisit for 1.8.

Reported-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Cc: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
5 years agoacpi-build: fix build on glib < 2.14
Michael S. Tsirkin [Thu, 21 Nov 2013 09:22:51 +0000 (11:22 +0200)]
acpi-build: fix build on glib < 2.14

g_array_get_element_size was only added in glib 2.14,
there's no way to find element size in with an older glib.

Fortunately we only use a single table (linker) where element size > 1.
Switch element size to 1 everywhere, then we can just look at len field
to get table size in bytes.

Add an assert to make sure we catch any violations of this rule.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
5 years agoacpi-build: fix build on glib < 2.22
Michael S. Tsirkin [Thu, 21 Nov 2013 09:19:58 +0000 (11:19 +0200)]
acpi-build: fix build on glib < 2.22

g_string_vprintf was only introduced in 2.24 so switch to vsnprintf
instead.  A bit uglier but name size is fixed at 4 bytes here so it's
easy.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
5 years agopci: unregister vmstate_pcibus on unplug
Bandan Das [Wed, 6 Nov 2013 22:52:17 +0000 (17:52 -0500)]
pci: unregister vmstate_pcibus on unplug

PCIBus registers a vmstate during init. Unregister it upon
removal/unplug.

Signed-off-by: Bandan Das <bsd@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
5 years agos390x: fix flat file load on 32 bit systems
Michael S. Tsirkin [Thu, 21 Nov 2013 11:59:15 +0000 (13:59 +0200)]
s390x: fix flat file load on 32 bit systems

pc-bios/s390-zipl.rom is a flat image so it's expected that
loading it as elf will fail.
It should fall back on loading a flat file, but doesn't
on 32 bit systems, instead it fails printing:
    qemu: hardware error: could not load bootloader 's390-zipl.rom'

The result is boot failure.

The reason is that a 64 bit unsigned interger which is set
to -1 on error is compared to -1UL which on a 32 bit system
with gcc is a 32 bit unsigned interger.
Since both are unsigned, no sign extension takes place and
comparison evaluates to non-equal.

There's no reason to do clever tricks: all functions
we call actually return int so just use int.
And then we can use == -1 everywhere, consistently.

Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
5 years agotarget-openrisc: Correct carry flag check of l.addc and l.addic test cases
Sebastian Macke [Tue, 22 Oct 2013 00:12:45 +0000 (02:12 +0200)]
target-openrisc: Correct carry flag check of l.addc and l.addic test cases

The test cases did not correctly test for the carry flag.

Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
5 years agotarget-openrisc: Correct memory bounds checking for the tlb buffers
Sebastian Macke [Tue, 22 Oct 2013 00:12:42 +0000 (02:12 +0200)]
target-openrisc: Correct memory bounds checking for the tlb buffers

The mtspr and mfspr routines didn't check for the correct memory boundaries.
This fixes a segmentation fault while booting Linux.

Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
5 years agoopenrisc-timer: Reduce overhead, Separate clock update functions
Sebastian Macke [Tue, 22 Oct 2013 00:12:41 +0000 (02:12 +0200)]
openrisc-timer: Reduce overhead, Separate clock update functions

The clock value is only evaluated when really necessary reducing
the overhead of the timer handling.

This also solves a problem in the way the Linux kernel
handles the timer and the expected accuracy.
The old version could lead to inaccurate timings.

Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
5 years agotarget-openrisc: Correct wrong epcr register in interrupt handler
Sebastian Macke [Tue, 22 Oct 2013 00:12:40 +0000 (02:12 +0200)]
target-openrisc: Correct wrong epcr register in interrupt handler

This patch corrects several misbehaviors during an interrupt process.
Most of the time the pc is already correct and therefore no special treatment
of the exceptions is necessary.

Tested by checking crashing programs which otherwise work in or1ksim.

Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
5 years agotarget-openrisc: Remove executable flag for every page
Sebastian Macke [Tue, 22 Oct 2013 00:12:39 +0000 (02:12 +0200)]
target-openrisc: Remove executable flag for every page

Pages should be flagged executable only if the tlb executable flag is
set or the mmu is off.

Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
5 years agotarget-openrisc: Remove unnecessary code generated by jump instructions
Sebastian Macke [Tue, 22 Oct 2013 00:12:38 +0000 (02:12 +0200)]
target-openrisc: Remove unnecessary code generated by jump instructions

The sr_f variable is only used for the l.bf and l.bnf instructions.
For clarity the code is also rewritten using a switch statement instead
of if chaining.

Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
5 years agotarget-openrisc: Speed up move instruction
Sebastian Macke [Tue, 22 Oct 2013 00:12:37 +0000 (02:12 +0200)]
target-openrisc: Speed up move instruction

The OpenRISC architecture does not have its own move register
instruction. Instead it uses either "l.addi rd, r0, x" or
"l.ori rd, rs, 0" or "l.or rd, rx, r0"

The l.ori instruction is automatically optimized but not the l.addi instruction.
This patch optimizes for this special case.

Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
5 years agoThe calculation of bytes_xfer in qemu_put_buffer() is wrong
Wangting (Kathy) [Tue, 19 Nov 2013 05:53:45 +0000 (05:53 +0000)]
The calculation of bytes_xfer in qemu_put_buffer() is wrong

In qemu_put_buffer(), bytes_xfer += size is wrong, it will be more
than expected, and should be bytes_xfer += l.

Signed-off-by: zhangmin <zhangmin6@huawei.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
5 years agoMerge remote-tracking branch 'quintela/migration.next' into staging
Anthony Liguori [Tue, 19 Nov 2013 21:03:06 +0000 (13:03 -0800)]
Merge remote-tracking branch 'quintela/migration.next' into staging

# By Peter Lieven
# Via Juan Quintela
* quintela/migration.next:
  migration: drop MADVISE_DONT_NEED for incoming zero pages

Message-id: 1384878412-23521-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoMerge remote-tracking branch 'stefanha/block' into staging
Anthony Liguori [Tue, 19 Nov 2013 21:00:52 +0000 (13:00 -0800)]
Merge remote-tracking branch 'stefanha/block' into staging

# By Andreas Färber
# Via Stefan Hajnoczi
* stefanha/block:
  qtest: Use -display none by default

5 years agoMerge remote-tracking branch 'afaerber/tags/qom-devices-for-anthony' into staging
Anthony Liguori [Tue, 19 Nov 2013 21:00:09 +0000 (13:00 -0800)]
Merge remote-tracking branch 'afaerber/tags/qom-devices-for-anthony' into staging

QOM infrastructure fixes for 1.7

* QOM memory leak fix

# gpg: Signature made Tue 19 Nov 2013 01:58:58 AM PST using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Vlad Yasevich
# Via Andreas Färber
* afaerber/tags/qom-devices-for-anthony:
  qom: Fix memory leak in object_property_set_link()

5 years agoMerge remote-tracking branch 'rth/tcg-ia64-17' into staging
Anthony Liguori [Tue, 19 Nov 2013 21:00:02 +0000 (13:00 -0800)]
Merge remote-tracking branch 'rth/tcg-ia64-17' into staging

# By Richard Henderson
# Via Richard Henderson
* rth/tcg-ia64-17:
  tcg-ia64: Introduce tcg_opc_bswap64_i
  tcg-ia64: Introduce tcg_opc_ext_i
  tcg-ia64: Introduce tcg_opc_movi_a
  tcg-ia64: Introduce tcg_opc_mov_a
  tcg-ia64: Use A3 form of logical operations
  tcg-ia64: Use SUB_A3 and ADDS_A4 for subtraction
  tcg-ia64: Use ADDS for small addition
  tcg-ia64: Avoid unnecessary stop bit in tcg_out_alu
  tcg-ia64: Move AREG0 to R32
  tcg-ia64: Simplify brcond
  tcg-ia64: Handle constant calls
  tcg-ia64: Use shortcuts for nop insns
  tcg-ia64: Use TCGMemOp within qemu_ldst routines

Message-id: 1384811395-7097-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoMerge remote-tracking branch 'mst/tags/for_anthony' into staging
Anthony Liguori [Tue, 19 Nov 2013 20:59:48 +0000 (12:59 -0800)]
Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pc last minute fixes for 1.8

This has a patch that drops an unused FW CFG entry.
I think it's best to include it before 1.7 to avoid
the need to maintain it in compat machine types.

There's also a doc bugfix by Amos: I'm guessing
doc fixes are still fair game even at this late stage.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 18 Nov 2013 03:48:14 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Amos Kong (1) and Igor Mammedov (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  doc: fix hardcoded helper path
  pc: disable pci-info

Message-id: 1384775449-6693-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoMerge remote-tracking branch 'mjt/trivial-patches' into staging
Anthony Liguori [Tue, 19 Nov 2013 20:59:26 +0000 (12:59 -0800)]
Merge remote-tracking branch 'mjt/trivial-patches' into staging

# By Jan Krupa (4) and others
# Via Michael Tokarev
* mjt/trivial-patches:
  hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently
  configure: Use -B switch only for Python versions which support it
  qga: Fix shutdown command of guest agent to work with SysV
  console: Remove unused debug code
  qga: Fix compilation for old versions of MinGW
  .travis.yml: basic compile and check recipes
  pci-assign: Fix error_report of pci-stub message
  qapi: Fix comment for create-type to match code.
  vl: fix build when configured with no graphic support
  usb: drop unused USBNetState.inpkt field
  qemu-char: add missing characters used in keymaps
  qemu-char: add support for U-prefixed symbols
  qemu-char: add Czech keymap file
  qemu-char: add Czech characters to VNC keysyms

Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoMerge remote-tracking branch 'kwolf/tags/for-anthony' into staging
Anthony Liguori [Tue, 19 Nov 2013 20:59:09 +0000 (12:59 -0800)]
Merge remote-tracking branch 'kwolf/tags/for-anthony' into staging

Block fixes for 1.7.0

# gpg: Signature made Fri 15 Nov 2013 09:51:25 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found

# By Max Reitz (3) and others
# Via Kevin Wolf
* kwolf/tags/for-anthony:
  block: Fail if requested driver is not available
  MAINTAINERS: add block driver sub-maintainers
  qemu-img: Fix overwriting 'ret' before using
  qemu-iotests: Test qcow2 count_contiguous_clusters()
  qcow2: fix possible corruption when reading multiple clusters
  qmp: access the local QemuOptsLists for drive option
  MAINTAINERS: add block tree repo URLs
  qemu-iotests: Extend 041 for unbacked mirroring
  block/drive-mirror: Check for NULL backing_hd
  qapi-schema: Update description for NewImageMode
  block: Print its file name if backing file opening failed

Message-id: 1384537999-5972-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoMerge remote-tracking branch 'stefanha/net' into staging
Anthony Liguori [Tue, 19 Nov 2013 20:58:32 +0000 (12:58 -0800)]
Merge remote-tracking branch 'stefanha/net' into staging

# By Amos Kong (1) and Sebastian Huber (1)
# Via Stefan Hajnoczi
* stefanha/net:
  virtio-net: fix the memory leak in rxfilter_notify()
  smc91c111: Fix receive starvation

Message-id: 1384532032-19057-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agoMerge remote-tracking branch 'agraf/tags/signed-ppc-for-upstream-1.7' into staging
Anthony Liguori [Tue, 19 Nov 2013 20:57:16 +0000 (12:57 -0800)]
Merge remote-tracking branch 'agraf/tags/signed-ppc-for-upstream-1.7' into staging

Patch queue for ppc - 2013-11-08

These are two patches that will hopefully make it into 1.7. The SLOF update
fixes -append kernel command line argument passing into the guest kernel. The
other patch makes VIO devices appear when using -device '?'.

# gpg: Signature made Thu 07 Nov 2013 07:34:54 PM PST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found

# By Alexey Kardashevskiy
# Via Alexander Graf
* agraf/tags/signed-ppc-for-upstream-1.7:
  pseries: Update SLOF firmware image
  spapr: add vio-bus devices to categories

Message-id: 1383881766-13958-1-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
5 years agomigration: drop MADVISE_DONT_NEED for incoming zero pages
Peter Lieven [Thu, 24 Oct 2013 07:21:29 +0000 (09:21 +0200)]
migration: drop MADVISE_DONT_NEED for incoming zero pages

The madvise for zeroed out pages was introduced when every transferred
zero page was memset to zero and thus allocated. Since commit
211ea740 we check for zeroness of a target page before we memset
it to zero. Additionally we memmap target memory so it is essentially
zero initialized (except for e.g. option roms and bios which are loaded
into target memory although they shouldn't).

It was reported recently that this madvise causes a performance degradation
in some situations. As the madvise should only be called rarely and if it's called
it is likely on a busy page (it was non-zero and changed to zero during migration)
drop it completely.

Reported-By: Zhang Haoyu <haoyu.zhang@huawei.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
5 years agoqom: Fix memory leak in object_property_set_link()
Vlad Yasevich [Fri, 15 Nov 2013 17:09:47 +0000 (12:09 -0500)]
qom: Fix memory leak in object_property_set_link()

Save the result of the call to object_get_canonical_path()
so we can free it.

Cc: qemu-stable@nongnu.org
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
5 years agoqtest: Use -display none by default
Andreas Färber [Mon, 18 Nov 2013 16:36:34 +0000 (17:36 +0100)]
qtest: Use -display none by default

This avoids each test needing to add it to suppress windows popping up.

[Commit 7ceeedd016facf8d58e14a0d1417fa7225d71072 ("blockdev-test: add
test case for drive_add duplicate IDs") and commit
43cd209803d6cffb1e1a028c9ff2fd0ff4fce954 ("qdev-monitor-test: add
device_add leak test cases") added qtest tests without specifying
-display none.

As a result, "make check" now tries to use graphics (GTK or SDL).  Since
graphics are not used by the test and inappropriate for headless "make
check" runs, add the missing -display none.

This fixes "make check" in the QEMU buildbot.
-- Stefan]

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
5 years agovirtio-net: fix the memory leak in rxfilter_notify()
Amos Kong [Mon, 18 Nov 2013 15:32:17 +0000 (23:32 +0800)]
virtio-net: fix the memory leak in rxfilter_notify()

object_get_canonical_path() returns a gchar*, it should be freed by the
caller.

Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
5 years agodoc: fix hardcoded helper path
Amos Kong [Tue, 22 Oct 2013 20:49:28 +0000 (04:49 +0800)]
doc: fix hardcoded helper path

The install directory of qemu-bridge-helper is configurable,
but we use a fixed path in the documentation.

DEFAULT_BRIDGE_HELPER macro isn't available in texi mode,
we should always use "/path/to/" prefix for dynamic paths
(e.g.: /path/to/image, /path/to/linux, etc).

Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
5 years agotcg-ia64: Introduce tcg_opc_bswap64_i
Richard Henderson [Thu, 5 Sep 2013 23:20:40 +0000 (19:20 -0400)]
tcg-ia64: Introduce tcg_opc_bswap64_i

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
5 years agotcg-ia64: Introduce tcg_opc_ext_i
Richard Henderson [Thu, 5 Sep 2013 23:13:41 +0000 (19:13 -0400)]
tcg-ia64: Introduce tcg_opc_ext_i

Being able to "extend" from 64-bits (with a mov) simplifies
a few places where the conditional breaks the train of thought.

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
5 years agotcg-ia64: Introduce tcg_opc_movi_a
Richard Henderson [Thu, 5 Sep 2013 22:56:39 +0000 (18:56 -0400)]
tcg-ia64: Introduce tcg_opc_movi_a

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
5 years agotcg-ia64: Introduce tcg_opc_mov_a
Richard Henderson [Thu, 5 Sep 2013 22:48:42 +0000 (18:48 -0400)]
tcg-ia64: Introduce tcg_opc_mov_a

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
5 years agotcg-ia64: Use A3 form of logical operations
Richard Henderson [Thu, 5 Sep 2013 21:13:43 +0000 (17:13 -0400)]
tcg-ia64: Use A3 form of logical operations

We can and/or/xor/andcm small constants, saving one cycle.

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
5 years agotcg-ia64: Use SUB_A3 and ADDS_A4 for subtraction
Richard Henderson [Thu, 5 Sep 2013 20:44:18 +0000 (16:44 -0400)]
tcg-ia64: Use SUB_A3 and ADDS_A4 for subtraction

We can subtract from more small constants that just 0 with one insn,
and we can add the negative for most small constants.

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
5 years agotcg-ia64: Use ADDS for small addition
Richard Henderson [Thu, 5 Sep 2013 20:15:13 +0000 (16:15 -0400)]
tcg-ia64: Use ADDS for small addition

Avoids a wasted cycle loading up small constants.

Simplify the code assuming the tcg optimizer is going to work
and don't expect the first operand of the add to be constant.

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
5 years agotcg-ia64: Avoid unnecessary stop bit in tcg_out_alu
Richard Henderson [Thu, 5 Sep 2013 19:56:44 +0000 (15:56 -0400)]
tcg-ia64: Avoid unnecessary stop bit in tcg_out_alu

When performing an operation with two input registers, we'd leave
the stop bit (and thus an extra cycle) that's only needed when one
or the other input is a constant.

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
5 years agotcg-ia64: Move AREG0 to R32
Richard Henderson [Thu, 5 Sep 2013 18:45:54 +0000 (14:45 -0400)]
tcg-ia64: Move AREG0 to R32

Since the move away from the global areg0, we're no longer globally
reserving areg0.  Which means our use of R7 clobbers a call-saved
register.  Shift areg0 into the windowed registers.  Indeed, choose
the incoming parameter register that it comes to us by.

This requires moving the register holding the return address elsewhere.
Choose R33 for tidiness.

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
5 years agotcg-ia64: Simplify brcond
Richard Henderson [Thu, 5 Sep 2013 16:47:41 +0000 (12:47 -0400)]
tcg-ia64: Simplify brcond

There was a misconception that a stop bit is required between a compare
and the branch that uses the predicate set by the compare.  This lead to
the usage of an extra bundle in which to perform the compare.  The extra
bundle left room for constants to be loaded for use with the compare insn.

If we pack the compare and the branch together in the same bundle, then
there's no longer any room for non-zero constants.  At which point we
can eliminate half the function by not handling them.

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
5 years agotcg-ia64: Handle constant calls
Richard Henderson [Thu, 5 Sep 2013 16:11:27 +0000 (12:11 -0400)]
tcg-ia64: Handle constant calls

Using only indirect calls results in 3 bundles (one to load the
descriptor address), and 4 stop bits.  By looking through the
descriptor to the constants, we can perform the call with 2
bundles and only 1 stop bit.

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
5 years agotcg-ia64: Use shortcuts for nop insns
Richard Henderson [Wed, 4 Sep 2013 23:00:52 +0000 (19:00 -0400)]
tcg-ia64: Use shortcuts for nop insns

There's no need to go through the full opcode-to-insn function call
to generate nops.  This makes the source a bit more readable.

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
5 years agotcg-ia64: Use TCGMemOp within qemu_ldst routines
Richard Henderson [Wed, 4 Sep 2013 21:24:38 +0000 (17:24 -0400)]
tcg-ia64: Use TCGMemOp within qemu_ldst routines

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
5 years agohw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently
Michael Tokarev [Sat, 16 Nov 2013 10:09:14 +0000 (14:09 +0400)]
hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently

$(PYTHON) is a Make variable which is set by configure.
In all other places over the tree, .py files are run from
Makefiles using this variable, except of a single leftover
in hw/i386/Makefile.obj (and a nearby place in there uses
$(PYTHON) correctly).  Fix this leftover too.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Luigi Rizzo <rizzo@iet.unipi.it>
Reviewed-by:: Stefan Weil <sw@weilnetz.de>

5 years agoconfigure: Use -B switch only for Python versions which support it
Stefan Weil [Thu, 14 Nov 2013 18:07:03 +0000 (19:07 +0100)]
configure: Use -B switch only for Python versions which support it

Commit 1d984a67a95d88f3e708b077dab8adeb47c38c93 added the -B switch
unconditionally. This breaks Python versions before 2.6 which don't
support that switch.

Now configure adds -B only if it is accepted by the Python interpreter.

This modification introduces a small incompatibility because -B might now
also be added when configure was called with --python=PYTHON_INTERPRETER.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
5 years agoqga: Fix shutdown command of guest agent to work with SysV
whitearchey [Wed, 6 Nov 2013 01:54:04 +0000 (10:54 +0900)]
qga: Fix shutdown command of guest agent to work with SysV

For now guest agent uses following command to shutdown system:
shutdown -P +0 "blabla"
but this syntax works only with shutdown command from systemd or upstart,
because SysV shutdown requires -h switch.

Following patch changes the command so it works with systemd, upstart and SysV

With upstart/systemd qga use one of thee commands, depending on 'mode' parameter:
  shutdown -P +0 "..."
  shutdown -H +0 "..."
  shutdown -r +0 "..."
SysV equivalents for these are:
  shutdown -h -P +0 "..."
  shutdown -h -H +0 "..."
  shutdown -h -r +0 "..."
and these retain their meaning with upstart/systemd.

According to FreeBSD manpages, shutdown does not accept -P and -H options. Commands should be:
  shutdown -p +0 "..."
  shutdown -h +0 "..."
  shutdown -r +0 "..."

shutdown in Solaris does not accept any of -hHpPr and does not accept time in "+0" format

Signed-off-by: Michael Avdienko <whitearchey@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
5 years agoblock: Fail if requested driver is not available
Kevin Wolf [Thu, 8 Aug 2013 15:44:52 +0000 (17:44 +0200)]
block: Fail if requested driver is not available

If an explicit driver option is present, but doesn't specify a valid
driver, then bdrv_open() should fail instead of probing the format.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
5 years agoMAINTAINERS: add block driver sub-maintainers
Stefan Hajnoczi [Wed, 13 Nov 2013 09:33:10 +0000 (10:33 +0100)]
MAINTAINERS: add block driver sub-maintainers

There are a number of contributors who maintain block drivers (image
formats and protocols).  They should be listed in the MAINTAINERS file
so that get_maintainer.pl lists them.

Note that commits are still merged through Kevin or Stefan's block tree
but the block driver sub-maintainers are usually the ones to review
patches.

Acked-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Acked-by: Stefan Weil <sw@weilnetz.de>
Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Jeff Cody <jcody@redhat.com>
Acked-by: Anthony Liguori <aliguori@amazon.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
5 years agoqemu-img: Fix overwriting 'ret' before using
Fam Zheng [Wed, 13 Nov 2013 12:26:49 +0000 (20:26 +0800)]
qemu-img: Fix overwriting 'ret' before using

This patch moves ret assignment after reporting original error.

We were lucky to pass qemu-iotests 048 (qemu-img compare case) but when
I tried to run with TEST_DIR=/tmp (tmpfs), it fails with a "wrong"
mismatch offset. This fixes two bugs.

In the first if branch, setting ret to 1 before using it makes dead code
in the next line: pnum is never added to mismatch offset even if ret was
0.

In the other if branch, currently the output error is always -4:
  strerror(-4) -> Unknown error -4

Added regression test in case 048.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
5 years agoqemu-iotests: Test qcow2 count_contiguous_clusters()
Kevin Wolf [Wed, 13 Nov 2013 11:00:10 +0000 (12:00 +0100)]
qemu-iotests: Test qcow2 count_contiguous_clusters()

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
5 years agosmc91c111: Fix receive starvation
Sebastian Huber [Thu, 14 Nov 2013 13:53:46 +0000 (14:53 +0100)]
smc91c111: Fix receive starvation

In case the smc91c111 interface signals that it cannot receive more
packets the packets are queued and further reception will be disabled.
In case the interface is again ready to receive packets notify the upper
layer.

Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
5 years agoqcow2: fix possible corruption when reading multiple clusters
Peter Lieven [Tue, 12 Nov 2013 12:48:07 +0000 (13:48 +0100)]
qcow2: fix possible corruption when reading multiple clusters

if multiple sectors spanning multiple clusters are read the
function count_contiguous_clusters should ensure that the
cluster type should not change between the clusters.

Especially the for-loop should break when we have one
or more normal clusters followed by a compressed cluster.

Unfortunately the wrong macro was used in the mask to
compare the flags.

This was discovered while debugging a data corruption
issue when converting a compressed qcow2 image to raw.
qemu-img reads 2MB chunks which span multiple clusters.

CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
5 years agoqmp: access the local QemuOptsLists for drive option
Amos Kong [Sat, 9 Nov 2013 04:15:47 +0000 (12:15 +0800)]
qmp: access the local QemuOptsLists for drive option

Currently we have three QemuOptsList (qemu_common_drive_opts,
qemu_legacy_drive_opts, and qemu_drive_opts), only qemu_drive_opts
is added to vm_config_groups[].

This patch changes query-command-line-options to access three local
QemuOptsLists for drive option, and merge the description items
together.

Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
5 years agoMAINTAINERS: add block tree repo URLs
Stefan Hajnoczi [Wed, 6 Nov 2013 15:06:25 +0000 (16:06 +0100)]
MAINTAINERS: add block tree repo URLs

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
5 years agoqemu-iotests: Extend 041 for unbacked mirroring
Max Reitz [Wed, 6 Nov 2013 18:50:45 +0000 (19:50 +0100)]
qemu-iotests: Extend 041 for unbacked mirroring

Add a new test case in file 041 for mirroring unbacked images in
"absolute-paths" mode. This should work, if possible, but most
importantly, qemu should never crash.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
5 years agoblock/drive-mirror: Check for NULL backing_hd
Max Reitz [Wed, 6 Nov 2013 18:50:44 +0000 (19:50 +0100)]
block/drive-mirror: Check for NULL backing_hd

It should be possible to execute the QMP "drive-mirror" command in
"none" sync mode and "absolute-paths" mode even for block devices
lacking a backing file.

"absolute-paths" does in fact not require a backing file to be present,
as can be seen from the "top" sync mode code path. "top" basically
states that the device should indeed have a backing file - however, the
current code catches the case if it doesn't and then simply treats it as
"full" sync mode, creating a target image without a backing file (in
"absolute-paths" mode). Thus, "absolute-paths" does not imply the target
file must indeed have a backing file.

Therefore, the target file may be left unbacked in case of "none" sync
mode as well, if the specified device is not backed either. Currently,
qemu will crash trying to dereference the backing file pointer since it
assumes that it will always be non-NULL in that case ("none" with
"absolute-paths").

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
5 years agoqapi-schema: Update description for NewImageMode
Max Reitz [Thu, 7 Nov 2013 18:47:48 +0000 (19:47 +0100)]
qapi-schema: Update description for NewImageMode

If the NewImageMode is "absolute-paths" but no backing file is available
(e.g., when mirroring a device with an unbacked image), the target image
will not be backed either. This patch updates the documentation in
qapi-schema.json accordingly.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
5 years agoblock: Print its file name if backing file opening failed
Fam Zheng [Fri, 8 Nov 2013 03:26:49 +0000 (11:26 +0800)]
block: Print its file name if backing file opening failed

If backing file doesn't exist, the error message is confusing and
misleading:

    $ qemu /tmp/a.qcow2
    qemu: could not open disk image /tmp/a.qcow2: Could not open file: No
    such file or directory

But...

    $ ls /tmp/a.qcow2
    /tmp/a.qcow2

    $ qemu-img info /tmp/a.qcow2
    image: /tmp/a.qcow2
    file format: qcow2
    virtual size: 8.0G (8589934592 bytes)
    disk size: 196K
    cluster_size: 65536
    backing file: /tmp/b.qcow2

Because...

    $ ls /tmp/b.qcow2
    ls: cannot access /tmp/b.qcow2: No such file or directory

This is not intuitive. It's better to have the missing file's name in
the error message. With this patch:

    $ qemu-io -c 'read 0 512' /tmp/a.qcow2
    qemu-io: can't open device /tmp/a.qcow2: Could not open backing
    file: Could not open '/stor/vm/arch.raw': No such file or directory
    no file open, try 'help open'

Which is a little bit better.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
5 years agopc: disable pci-info
Igor Mammedov [Wed, 6 Nov 2013 12:48:40 +0000 (13:48 +0100)]
pc: disable pci-info

The BIOS that we ship in 1.7 does not use pci info
from host and so far isn't going to use it.
Taking in account problems it caused see 9604f70fdf and
to avoid future incompatibility issues, it's safest to
disable that interface by default for all machine types
including 1.7 as it was never exposed/used by guest.
And properly remove/cleanup it during 1.8 development cycle.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>