]>
Commit | Line | Data |
---|---|---|
d5553cb0 JN |
1 | Device Tree Clock bindings for ZTE zx296702 |
2 | ||
3 | This binding uses the common clock binding[1]. | |
4 | ||
5 | [1] Documentation/devicetree/bindings/clock/clock-bindings.txt | |
6 | ||
7 | Required properties: | |
8 | - compatible : shall be one of the following: | |
9 | "zte,zx296702-topcrm-clk": | |
10 | zx296702 top clock selection, divider and gating | |
11 | ||
12 | "zte,zx296702-lsp0crpm-clk" and | |
13 | "zte,zx296702-lsp1crpm-clk": | |
14 | zx296702 device level clock selection and gating | |
15 | ||
16 | - reg: Address and length of the register set | |
17 | ||
18 | The clock consumer should specify the desired clock by having the clock | |
19 | ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h | |
20 | for the full list of zx296702 clock IDs. | |
21 | ||
22 | ||
4c9847b7 | 23 | topclk: topcrm@09800000 { |
d5553cb0 JN |
24 | compatible = "zte,zx296702-topcrm-clk"; |
25 | reg = <0x09800000 0x1000>; | |
26 | #clock-cells = <1>; | |
27 | }; | |
28 | ||
4c9847b7 | 29 | uart0: serial@09405000 { |
d5553cb0 JN |
30 | compatible = "zte,zx296702-uart"; |
31 | reg = <0x09405000 0x1000>; | |
32 | interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; | |
33 | clocks = <&lsp1clk ZX296702_UART0_PCLK>; | |
d5553cb0 | 34 | }; |