]>
Commit | Line | Data |
---|---|---|
d6da06fc VB |
1 | * Altera Triple-Speed Ethernet MAC driver (TSE) |
2 | ||
3 | Required properties: | |
4 | - compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should | |
5 | be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE. | |
6 | ALTR is supported for legacy device trees, but is deprecated. | |
7 | altr should be used for all new designs. | |
8 | - reg: Address and length of the register set for the device. It contains | |
9 | the information of registers in the same order as described by reg-names | |
10 | - reg-names: Should contain the reg names | |
11 | "control_port": MAC configuration space region | |
12 | "tx_csr": xDMA Tx dispatcher control and status space region | |
13 | "tx_desc": MSGDMA Tx dispatcher descriptor space region | |
14 | "rx_csr" : xDMA Rx dispatcher control and status space region | |
15 | "rx_desc": MSGDMA Rx dispatcher descriptor space region | |
16 | "rx_resp": MSGDMA Rx dispatcher response space region | |
17 | "s1": SGDMA descriptor memory | |
18 | - interrupts: Should contain the TSE interrupts and it's mode. | |
19 | - interrupt-names: Should contain the interrupt names | |
20 | "rx_irq": xDMA Rx dispatcher interrupt | |
21 | "tx_irq": xDMA Tx dispatcher interrupt | |
22 | - rx-fifo-depth: MAC receive FIFO buffer depth in bytes | |
23 | - tx-fifo-depth: MAC transmit FIFO buffer depth in bytes | |
24 | - phy-mode: See ethernet.txt in the same directory. | |
25 | - phy-handle: See ethernet.txt in the same directory. | |
26 | - phy-addr: See ethernet.txt in the same directory. A configuration should | |
27 | include phy-handle or phy-addr. | |
28 | - altr,has-supplementary-unicast: | |
29 | If present, TSE supports additional unicast addresses. | |
30 | Otherwise additional unicast addresses are not supported. | |
31 | - altr,has-hash-multicast-filter: | |
32 | If present, TSE supports a hash based multicast filter. | |
33 | Otherwise, hash-based multicast filtering is not supported. | |
34 | ||
35 | - mdio device tree subnode: When the TSE has a phy connected to its local | |
36 | mdio, there must be device tree subnode with the following | |
37 | required properties: | |
38 | ||
39 | - compatible: Must be "altr,tse-mdio". | |
40 | - #address-cells: Must be <1>. | |
41 | - #size-cells: Must be <0>. | |
42 | ||
43 | For each phy on the mdio bus, there must be a node with the following | |
44 | fields: | |
45 | ||
46 | - reg: phy id used to communicate to phy. | |
47 | - device_type: Must be "ethernet-phy". | |
48 | ||
687e3d55 PŠ |
49 | The MAC address will be determined using the optional properties defined in |
50 | ethernet.txt. | |
d6da06fc VB |
51 | |
52 | Example: | |
53 | ||
4c9847b7 | 54 | tse_sub_0_eth_tse_0: ethernet@1,00000000 { |
d6da06fc VB |
55 | compatible = "altr,tse-msgdma-1.0"; |
56 | reg = <0x00000001 0x00000000 0x00000400>, | |
57 | <0x00000001 0x00000460 0x00000020>, | |
58 | <0x00000001 0x00000480 0x00000020>, | |
59 | <0x00000001 0x000004A0 0x00000008>, | |
60 | <0x00000001 0x00000400 0x00000020>, | |
61 | <0x00000001 0x00000420 0x00000020>; | |
62 | reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; | |
63 | interrupt-parent = <&hps_0_arm_gic_0>; | |
64 | interrupts = <0 41 4>, <0 40 4>; | |
65 | interrupt-names = "rx_irq", "tx_irq"; | |
66 | rx-fifo-depth = <2048>; | |
67 | tx-fifo-depth = <2048>; | |
68 | address-bits = <48>; | |
69 | max-frame-size = <1500>; | |
70 | local-mac-address = [ 00 00 00 00 00 00 ]; | |
71 | phy-mode = "gmii"; | |
72 | altr,has-supplementary-unicast; | |
73 | altr,has-hash-multicast-filter; | |
74 | phy-handle = <&phy0>; | |
75 | mdio { | |
76 | compatible = "altr,tse-mdio"; | |
77 | #address-cells = <1>; | |
78 | #size-cells = <0>; | |
79 | phy0: ethernet-phy@0 { | |
80 | reg = <0x0>; | |
81 | device_type = "ethernet-phy"; | |
82 | }; | |
83 | ||
84 | phy1: ethernet-phy@1 { | |
85 | reg = <0x1>; | |
86 | device_type = "ethernet-phy"; | |
87 | }; | |
88 | ||
89 | }; | |
90 | }; | |
91 | ||
4c9847b7 | 92 | tse_sub_1_eth_tse_0: ethernet@1,00001000 { |
d6da06fc VB |
93 | compatible = "altr,tse-msgdma-1.0"; |
94 | reg = <0x00000001 0x00001000 0x00000400>, | |
95 | <0x00000001 0x00001460 0x00000020>, | |
96 | <0x00000001 0x00001480 0x00000020>, | |
97 | <0x00000001 0x000014A0 0x00000008>, | |
98 | <0x00000001 0x00001400 0x00000020>, | |
99 | <0x00000001 0x00001420 0x00000020>; | |
100 | reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; | |
101 | interrupt-parent = <&hps_0_arm_gic_0>; | |
102 | interrupts = <0 43 4>, <0 42 4>; | |
103 | interrupt-names = "rx_irq", "tx_irq"; | |
104 | rx-fifo-depth = <2048>; | |
105 | tx-fifo-depth = <2048>; | |
106 | address-bits = <48>; | |
107 | max-frame-size = <1500>; | |
108 | local-mac-address = [ 00 00 00 00 00 00 ]; | |
109 | phy-mode = "gmii"; | |
110 | altr,has-supplementary-unicast; | |
111 | altr,has-hash-multicast-filter; | |
112 | phy-handle = <&phy1>; | |
113 | }; |