]>
Commit | Line | Data |
---|---|---|
14c7b3c3 AL |
1 | Marvell DSA Switch Device Tree Bindings |
2 | --------------------------------------- | |
3 | ||
4 | WARNING: This binding is currently unstable. Do not program it into a | |
5 | FLASH never to be changed again. Once this binding is stable, this | |
6 | warning will be removed. | |
7 | ||
8 | If you need a stable binding, use the old dsa.txt binding. | |
9 | ||
10 | Marvell Switches are MDIO devices. The following properties should be | |
11 | placed as a child node of an mdio device. | |
12 | ||
52638f71 AL |
13 | The properties described here are those specific to Marvell devices. |
14 | Additional required and optional properties can be found in dsa.txt. | |
15 | ||
14c7b3c3 | 16 | Required properties: |
d2345599 AL |
17 | - compatible : Should be one of "marvell,mv88e6085" or |
18 | "marvell,mv88e6190" | |
19 | - reg : Address on the MII bus for the switch. | |
14c7b3c3 | 20 | |
52638f71 AL |
21 | Optional properties: |
22 | ||
23 | - reset-gpios : Should be a gpio specifier for a reset line | |
dc30c35b AL |
24 | - interrupt-parent : Parent interrupt controller |
25 | - interrupts : Interrupt from the switch | |
26 | - interrupt-controller : Indicates the switch is itself an interrupt | |
27 | controller. This is used for the PHY interrupts. | |
28 | #interrupt-cells = <2> : Controller uses two cells, number and flag | |
6c713a3a AL |
29 | - eeprom-length : Set to the length of an EEPROM connected to the |
30 | switch. Must be set if the switch can not detect | |
31 | the presence and/or size of a connected EEPROM, | |
32 | otherwise optional. | |
a3c53be5 AL |
33 | - mdio : Container of PHY and devices on the switches MDIO |
34 | bus. | |
d2345599 | 35 | - mdio? : Container of PHYs and devices on the external MDIO |
a3c53be5 AL |
36 | bus. The node must contains a compatible string of |
37 | "marvell,mv88e6xxx-mdio-external" | |
38 | ||
14c7b3c3 AL |
39 | Example: |
40 | ||
d2345599 AL |
41 | mdio { |
42 | #address-cells = <1>; | |
43 | #size-cells = <0>; | |
44 | interrupt-parent = <&gpio0>; | |
45 | interrupts = <27 IRQ_TYPE_LEVEL_LOW>; | |
46 | interrupt-controller; | |
47 | #interrupt-cells = <2>; | |
14c7b3c3 | 48 | |
d2345599 AL |
49 | switch0: switch@0 { |
50 | compatible = "marvell,mv88e6085"; | |
51 | reg = <0>; | |
52 | reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; | |
53 | }; | |
54 | mdio { | |
55 | #address-cells = <1>; | |
56 | #size-cells = <0>; | |
57 | switch1phy0: switch1phy0@0 { | |
58 | reg = <0>; | |
59 | interrupt-parent = <&switch0>; | |
60 | interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; | |
61 | }; | |
62 | }; | |
63 | }; | |
a3c53be5 | 64 | |
d2345599 AL |
65 | mdio { |
66 | #address-cells = <1>; | |
67 | #size-cells = <0>; | |
68 | interrupt-parent = <&gpio0>; | |
69 | interrupts = <27 IRQ_TYPE_LEVEL_LOW>; | |
70 | interrupt-controller; | |
71 | #interrupt-cells = <2>; | |
a3c53be5 | 72 | |
d2345599 AL |
73 | switch0: switch@0 { |
74 | compatible = "marvell,mv88e6390"; | |
75 | reg = <0>; | |
76 | reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; | |
77 | }; | |
78 | mdio { | |
79 | #address-cells = <1>; | |
80 | #size-cells = <0>; | |
81 | switch1phy0: switch1phy0@0 { | |
82 | reg = <0>; | |
83 | interrupt-parent = <&switch0>; | |
84 | interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; | |
85 | }; | |
86 | }; | |
a3c53be5 | 87 | |
d2345599 AL |
88 | mdio1 { |
89 | compatible = "marvell,mv88e6xxx-mdio-external"; | |
90 | #address-cells = <1>; | |
91 | #size-cells = <0>; | |
92 | switch1phy9: switch1phy0@9 { | |
93 | reg = <9>; | |
94 | }; | |
95 | }; | |
96 | }; |