]>
Commit | Line | Data |
---|---|---|
3bcfa9e4 HVR |
1 | Kernel driver g760a |
2 | =================== | |
3 | ||
4 | Supported chips: | |
5 | * Global Mixed-mode Technology Inc. G760A | |
6 | Prefix: 'g760a' | |
7 | Datasheet: Publicly available at the GMT website | |
0ea6e611 | 8 | http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf |
3bcfa9e4 HVR |
9 | |
10 | Author: Herbert Valerio Riedel <hvr@gnu.org> | |
11 | ||
12 | Description | |
13 | ----------- | |
14 | ||
15 | The GMT G760A Fan Speed PWM Controller is connected directly to a fan | |
16 | and performs closed-loop control of the fan speed. | |
17 | ||
18 | The fan speed is programmed by setting the period via 'pwm1' of two | |
19 | consecutive speed pulses. The period is defined in terms of clock | |
20 | cycle counts of an assumed 32kHz clock source. | |
21 | ||
22 | Setting a period of 0 stops the fan; setting the period to 255 sets | |
23 | fan to maximum speed. | |
24 | ||
25 | The measured fan rotation speed returned via 'fan1_input' is derived | |
26 | from the measured speed pulse period by assuming again a 32kHz clock | |
27 | source and a 2 pulse-per-revolution fan. | |
28 | ||
29 | The 'alarms' file provides access to the two alarm bits provided by | |
30 | the G760A chip's status register: Bit 0 is set when the actual fan | |
31 | speed differs more than 20% with respect to the programmed fan speed; | |
32 | bit 1 is set when fan speed is below 1920 RPM. | |
33 | ||
34 | The g760a driver will not update its values more frequently than every | |
35 | other second; reading them more often will do no harm, but will return | |
36 | 'old' values. |