]>
Commit | Line | Data |
---|---|---|
7f15b664 RM |
1 | Kernel driver it87 |
2 | ================== | |
3 | ||
4 | Supported chips: | |
574e9bd8 | 5 | * IT8603E/IT8623E |
c145d5c6 RM |
6 | Prefix: 'it8603' |
7 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
8 | Datasheet: Not publicly available | |
3ba9d977 GR |
9 | * IT8620E |
10 | Prefix: 'it8620' | |
11 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
71a9c232 GR |
12 | * IT8628E |
13 | Prefix: 'it8628' | |
14 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
3ba9d977 | 15 | Datasheet: Not publicly available |
7f15b664 RM |
16 | * IT8705F |
17 | Prefix: 'it87' | |
91749996 | 18 | Addresses scanned: from Super I/O config space (8 I/O ports) |
404a552d | 19 | Datasheet: Once publicly available at the ITE website, but no longer |
7f15b664 RM |
20 | * IT8712F |
21 | Prefix: 'it8712' | |
8e9afcbb | 22 | Addresses scanned: from Super I/O config space (8 I/O ports) |
404a552d | 23 | Datasheet: Once publicly available at the ITE website, but no longer |
08a8f6e9 | 24 | * IT8716F/IT8726F |
17d648bf JD |
25 | Prefix: 'it8716' |
26 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
404a552d | 27 | Datasheet: Once publicly available at the ITE website, but no longer |
87673dd7 JD |
28 | * IT8718F |
29 | Prefix: 'it8718' | |
30 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
404a552d | 31 | Datasheet: Once publicly available at the ITE website, but no longer |
b4da93e4 JMS |
32 | * IT8720F |
33 | Prefix: 'it8720' | |
34 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
404a552d | 35 | Datasheet: Not publicly available |
44c1bcd4 JD |
36 | * IT8721F/IT8758E |
37 | Prefix: 'it8721' | |
38 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
39 | Datasheet: Not publicly available | |
16b5dda2 JD |
40 | * IT8728F |
41 | Prefix: 'it8728' | |
42 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
43 | Datasheet: Not publicly available | |
ead80803 JM |
44 | * IT8732F |
45 | Prefix: 'it8732' | |
46 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
47 | Datasheet: Not publicly available | |
b0636707 GR |
48 | * IT8771E |
49 | Prefix: 'it8771' | |
50 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
51 | Datasheet: Not publicly available | |
52 | * IT8772E | |
53 | Prefix: 'it8772' | |
54 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
55 | Datasheet: Not publicly available | |
7bc32d29 GR |
56 | * IT8781F |
57 | Prefix: 'it8781' | |
58 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
59 | Datasheet: Not publicly available | |
0531d98b GR |
60 | * IT8782F |
61 | Prefix: 'it8782' | |
62 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
63 | Datasheet: Not publicly available | |
64 | * IT8783E/F | |
65 | Prefix: 'it8783' | |
66 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
67 | Datasheet: Not publicly available | |
a0c1424a TL |
68 | * IT8786E |
69 | Prefix: 'it8786' | |
70 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
71 | Datasheet: Not publicly available | |
4ee07157 GR |
72 | * IT8790E |
73 | Prefix: 'it8790' | |
74 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
75 | Datasheet: Not publicly available | |
7f15b664 | 76 | * SiS950 [clone of IT8705F] |
91749996 JD |
77 | Prefix: 'it87' |
78 | Addresses scanned: from Super I/O config space (8 I/O ports) | |
7f15b664 RM |
79 | Datasheet: No longer be available |
80 | ||
b19367c6 | 81 | Authors: |
f1d8e332 | 82 | Christophe Gauthron |
7c81c60f | 83 | Jean Delvare <jdelvare@suse.de> |
7f15b664 RM |
84 | |
85 | ||
86 | Module Parameters | |
87 | ----------------- | |
88 | ||
89 | * update_vbat: int | |
90 | ||
91 | 0 if vbat should report power on value, 1 if vbat should be updated after | |
92 | each read. Default is 0. On some boards the battery voltage is provided | |
93 | by either the battery or the onboard power supply. Only the first reading | |
94 | at power on will be the actual battery voltage (which the chip does | |
95 | automatically). On other boards the battery voltage is always fed to | |
96 | the chip so can be read at any time. Excessive reading may decrease | |
97 | battery life but no information is given in the datasheet. | |
98 | ||
99 | * fix_pwm_polarity int | |
100 | ||
101 | Force PWM polarity to active high (DANGEROUS). Some chips are | |
102 | misconfigured by BIOS - PWM values would be inverted. This option tries | |
103 | to fix this. Please contact your BIOS manufacturer and ask him for fix. | |
104 | ||
8e9afcbb JD |
105 | |
106 | Hardware Interfaces | |
107 | ------------------- | |
108 | ||
c94bed8e | 109 | All the chips supported by this driver are LPC Super-I/O chips, accessed |
8e9afcbb JD |
110 | through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an |
111 | SMBus interface to the hardware monitoring functions. This driver no | |
112 | longer supports this interface though, as it is slower and less reliable | |
113 | than the ISA access, and was only available on a small number of | |
114 | motherboard models. | |
115 | ||
116 | ||
7f15b664 RM |
117 | Description |
118 | ----------- | |
119 | ||
71a9c232 GR |
120 | This driver implements support for the IT8603E, IT8620E, IT8623E, IT8628E, |
121 | IT8705F, IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, | |
ead80803 JM |
122 | IT8758E, IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and |
123 | SiS950 chips. | |
7f15b664 RM |
124 | |
125 | These chips are 'Super I/O chips', supporting floppy disks, infrared ports, | |
126 | joysticks and other miscellaneous stuff. For hardware monitoring, they | |
127 | include an 'environment controller' with 3 temperature sensors, 3 fan | |
3d30f9e6 JD |
128 | rotation speed sensors, 8 voltage sensors, associated alarms, and chassis |
129 | intrusion detection. | |
7f15b664 | 130 | |
17d648bf JD |
131 | The IT8712F and IT8716F additionally feature VID inputs, used to report |
132 | the Vcore voltage of the processor. The early IT8712F have 5 VID pins, | |
133 | the IT8716F and late IT8712F have 6. They are shared with other functions | |
134 | though, so the functionality may not be available on a given system. | |
17d648bf | 135 | |
b4da93e4 JMS |
136 | The IT8718F and IT8720F also features VID inputs (up to 8 pins) but the value |
137 | is stored in the Super-I/O configuration space. Due to technical limitations, | |
87673dd7 JD |
138 | this value can currently only be read once at initialization time, so |
139 | the driver won't notice and report changes in the VID value. The two | |
140 | upper VID bits share their pins with voltage inputs (in5 and in6) so you | |
141 | can't have both on a given board. | |
142 | ||
44c1bcd4 JD |
143 | The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions |
144 | have support for 2 additional fans. The additional fans are supported by the | |
145 | driver. | |
17d648bf | 146 | |
ead80803 JM |
147 | The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F, |
148 | IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer | |
149 | counters for fans 1 to 3. This is better (no more fan clock divider mess) but | |
150 | not compatible with the older chips and revisions. The 16-bit tachometer mode | |
7bc32d29 | 151 | is enabled by the driver when one of the above chips is detected. |
17d648bf | 152 | |
08a8f6e9 RM |
153 | The IT8726F is just bit enhanced IT8716F with additional hardware |
154 | for AMD power sequencing. Therefore the chip will appear as IT8716F | |
155 | to userspace applications. | |
156 | ||
b0636707 GR |
157 | The IT8728F, IT8771E, and IT8772E are considered compatible with the IT8721F, |
158 | until a datasheet becomes available (hopefully.) | |
16b5dda2 | 159 | |
574e9bd8 | 160 | The IT8603E/IT8623E is a custom design, hardware monitoring part is similar to |
3ba9d977 GR |
161 | IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode |
162 | of the fan is not supported (value 0 of pwmX_enable). | |
163 | ||
71a9c232 GR |
164 | The IT8620E and IT8628E are custom designs, hardware monitoring part is similar |
165 | to IT8728F. It only supports 16-bit fan mode. Both chips support up to 6 fans. | |
c145d5c6 | 166 | |
4ee07157 GR |
167 | The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled. |
168 | ||
ead80803 JM |
169 | The IT8732F supports a closed-loop mode for fan control, but this is not |
170 | currently implemented by the driver. | |
171 | ||
7f15b664 RM |
172 | Temperatures are measured in degrees Celsius. An alarm is triggered once |
173 | when the Overtemperature Shutdown limit is crossed. | |
174 | ||
175 | Fan rotation speeds are reported in RPM (rotations per minute). An alarm is | |
17d648bf JD |
176 | triggered if the rotation speed has dropped below a programmable limit. When |
177 | 16-bit tachometer counters aren't used, fan readings can be divided by | |
178 | a programmable divider (1, 2, 4 or 8) to give the readings more range or | |
179 | accuracy. With a divider of 2, the lowest representable value is around | |
180 | 2600 RPM. Not all RPM values can accurately be represented, so some rounding | |
181 | is done. | |
7f15b664 RM |
182 | |
183 | Voltage sensors (also known as IN sensors) report their values in volts. An | |
184 | alarm is triggered if the voltage has crossed a programmable minimum or | |
185 | maximum limit. Note that minimum in this case always means 'closest to | |
ead80803 JM |
186 | zero'; this is important for negative voltage measurements. On most chips, all |
187 | voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution | |
188 | of 0.016 volt. IT8603E, IT8721F/IT8758E and IT8728F can measure between 0 and | |
189 | 3.06 volts, with a resolution of 0.012 volt. IT8732F can measure between 0 and | |
190 | 2.8 volts with a resolution of 0.0109 volt. The battery voltage in8 does not | |
191 | have limit registers. | |
192 | ||
71a9c232 GR |
193 | On the IT8603E, IT8620E, IT8628E, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F, |
194 | and IT8783E/F, some voltage inputs are internal and scaled inside the chip: | |
c145d5c6 | 195 | * in3 (optional) |
7bc32d29 | 196 | * in7 (optional for IT8781F, IT8782F, and IT8783E/F) |
c145d5c6 RM |
197 | * in8 (always) |
198 | * in9 (relevant for IT8603E only) | |
199 | The driver handles this transparently so user-space doesn't have to care. | |
7f15b664 | 200 | |
b4da93e4 | 201 | The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value: |
87673dd7 JD |
202 | the voltage level your processor should work with. This is hardcoded by |
203 | the mainboard and/or processor itself. It is a value in volts. | |
7f15b664 RM |
204 | |
205 | If an alarm triggers, it will remain triggered until the hardware register | |
206 | is read at least once. This means that the cause for the alarm may already | |
207 | have disappeared! Note that in the current implementation, all hardware | |
208 | registers are read whenever any data is read (unless it is less than 1.5 | |
209 | seconds since the last update). This means that you can easily miss | |
210 | once-only alarms. | |
211 | ||
d9b327c3 JD |
212 | Out-of-limit readings can also result in beeping, if the chip is properly |
213 | wired and configured. Beeping can be enabled or disabled per sensor type | |
214 | (temperatures, voltages and fans.) | |
215 | ||
7f15b664 RM |
216 | The IT87xx only updates its values each 1.5 seconds; reading it more often |
217 | will do no harm, but will return 'old' values. | |
218 | ||
4ed10779 | 219 | To change sensor N to a thermistor, 'echo 4 > tempN_type' where N is 1, 2, |
7f15b664 RM |
220 | or 3. To change sensor N to a thermal diode, 'echo 3 > tempN_type'. |
221 | Give 0 for unused sensor. Any other value is invalid. To configure this at | |
4ed10779 | 222 | startup, consult lm_sensors's /etc/sensors.conf. (4 = thermistor; |
7f15b664 RM |
223 | 3 = thermal diode) |
224 | ||
f8d0c19a JD |
225 | |
226 | Fan speed control | |
227 | ----------------- | |
228 | ||
7f15b664 | 229 | The fan speed control features are limited to manual PWM mode. Automatic |
4f3f51bc JD |
230 | "Smart Guardian" mode control handling is only implemented for older chips |
231 | (see below.) However if you want to go for "manual mode" just write 1 to | |
232 | pwmN_enable. | |
f8d0c19a JD |
233 | |
234 | If you are only able to control the fan speed with very small PWM values, | |
235 | try lowering the PWM base frequency (pwm1_freq). Depending on the fan, | |
236 | it may give you a somewhat greater control range. The same frequency is | |
237 | used to drive all fan outputs, which is why pwm2_freq and pwm3_freq are | |
238 | read-only. | |
4f3f51bc JD |
239 | |
240 | ||
241 | Automatic fan speed control (old interface) | |
242 | ------------------------------------------- | |
243 | ||
244 | The driver supports the old interface to automatic fan speed control | |
245 | which is implemented by IT8705F chips up to revision F and IT8712F | |
246 | chips up to revision G. | |
247 | ||
248 | This interface implements 4 temperature vs. PWM output trip points. | |
249 | The PWM output of trip point 4 is always the maximum value (fan running | |
250 | at full speed) while the PWM output of the other 3 trip points can be | |
251 | freely chosen. The temperature of all 4 trip points can be freely chosen. | |
252 | Additionally, trip point 1 has an hysteresis temperature attached, to | |
253 | prevent fast switching between fan on and off. | |
254 | ||
255 | The chip automatically computes the PWM output value based on the input | |
256 | temperature, based on this simple rule: if the temperature value is | |
257 | between trip point N and trip point N+1 then the PWM output value is | |
258 | the one of trip point N. The automatic control mode is less flexible | |
259 | than the manual control mode, but it reacts faster, is more robust and | |
260 | doesn't use CPU cycles. | |
cccfc9c4 JD |
261 | |
262 | Trip points must be set properly before switching to automatic fan speed | |
263 | control mode. The driver will perform basic integrity checks before | |
264 | actually switching to automatic control mode. | |
161d898a GR |
265 | |
266 | ||
267 | Temperature offset attributes | |
268 | ----------------------------- | |
269 | ||
270 | The driver supports temp[1-3]_offset sysfs attributes to adjust the reported | |
271 | temperature for thermal diodes or diode-connected thermal transistors. | |
272 | If a temperature sensor is configured for thermistors, the attribute values | |
5d8d2f2b GR |
273 | are ignored. If the thermal sensor type is Intel PECI, the temperature offset |
274 | must be programmed to the critical CPU temperature. |