projects / mirror_ubuntu-artful-kernel.git / blame
| Commit | Line | Data |
|---|---|---|
| 4453d736 GR |
1 | Kernel driver jc42 |
| 2 | ================== | |
| 3 | ||
| 4 | Supported chips: | |
| 5 | * Analog Devices ADT7408 | |
| 6 | Prefix: 'adt7408' | |
| 7 | Addresses scanned: I2C 0x18 - 0x1f | |
| 8 | Datasheets: | |
| 9 | http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf | |
| 10 | * IDT TSE2002B3, TS3000B3 | |
| 11 | Prefix: 'tse2002b3', 'ts3000b3' | |
| 12 | Addresses scanned: I2C 0x18 - 0x1f | |
| 13 | Datasheets: | |
| 14 | http://www.idt.com/products/getdoc.cfm?docid=18715691 | |
| 15 | http://www.idt.com/products/getdoc.cfm?docid=18715692 | |
| 16 | * Maxim MAX6604 | |
| 17 | Prefix: 'max6604' | |
| 18 | Addresses scanned: I2C 0x18 - 0x1f | |
| 19 | Datasheets: | |
| 20 | http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf | |
| 21 | * Microchip MCP9805, MCP98242, MCP98243, MCP9843 | |
| 22 | Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843' | |
| 23 | Addresses scanned: I2C 0x18 - 0x1f | |
| 24 | Datasheets: | |
| 25 | http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf | |
| 26 | http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf | |
| 27 | http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf | |
| 28 | * NXP Semiconductors SE97, SE97B | |
| 29 | Prefix: 'se97' | |
| 30 | Addresses scanned: I2C 0x18 - 0x1f | |
| 31 | Datasheets: | |
| 32 | http://www.nxp.com/documents/data_sheet/SE97.pdf | |
| 33 | http://www.nxp.com/documents/data_sheet/SE97B.pdf | |
| 34 | * NXP Semiconductors SE98 | |
| 35 | Prefix: 'se98' | |
| 36 | Addresses scanned: I2C 0x18 - 0x1f | |
| 37 | Datasheets: | |
| 38 | http://www.nxp.com/documents/data_sheet/SE98.pdf | |
| 39 | * ON Semiconductor CAT34TS02, CAT6095 | |
| 40 | Prefix: 'cat34ts02', 'cat6095' | |
| 41 | Addresses scanned: I2C 0x18 - 0x1f | |
| 42 | Datasheet: | |
| 43 | http://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF | |
| 44 | http://www.onsemi.com/pub/Collateral/CAT6095-D.PDF | |
| 45 | * ST Microelectronics STTS424, STTS424E02 | |
| 46 | Prefix: 'stts424' | |
| 47 | Addresses scanned: I2C 0x18 - 0x1f | |
| 48 | Datasheets: | |
| 49 | http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf | |
| 50 | http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf | |
| 4de86126 JD |
51 | * ST Microelectronics STTS2002, STTS3000 |
| 52 | Prefix: 'stts2002', 'stts3000' | |
| 53 | Addresses scanned: I2C 0x18 - 0x1f | |
| 54 | Datasheets: | |
| 55 | http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf | |
| 56 | http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf | |
| 4453d736 GR |
57 | * JEDEC JC 42.4 compliant temperature sensor chips |
| 58 | Prefix: 'jc42' | |
| 59 | Addresses scanned: I2C 0x18 - 0x1f | |
| d5622f5b CL |
60 | Datasheet: |
| 61 | http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf | |
| 4453d736 GR |
62 | |
| 63 | Author: | |
| 64 | Guenter Roeck <guenter.roeck@ericsson.com> | |
| 65 | ||
| 66 | ||
| 67 | Description | |
| 68 | ----------- | |
| 69 | ||
| d5622f5b CL |
70 | This driver implements support for JEDEC JC 42.4 compliant temperature sensors, |
| 71 | which are used on many DDR3 memory modules for mobile devices and servers. Some | |
| 72 | systems use the sensor to prevent memory overheating by automatically throttling | |
| 73 | the memory controller. | |
| 74 | ||
| 4453d736 GR |
75 | The driver auto-detects the chips listed above, but can be manually instantiated |
| 76 | to support other JC 42.4 compliant chips. | |
| 77 | ||
| 78 | Example: the following will load the driver for a generic JC 42.4 compliant | |
| 79 | temperature sensor at address 0x18 on I2C bus #1: | |
| 80 | ||
| 81 | # modprobe jc42 | |
| 82 | # echo jc42 0x18 > /sys/bus/i2c/devices/i2c-1/new_device | |
| 83 | ||
| 84 | A JC 42.4 compliant chip supports a single temperature sensor. Minimum, maximum, | |
| 85 | and critical temperature can be configured. There are alarms for high, low, | |
| 86 | and critical thresholds. | |
| 87 | ||
| 88 | There is also an hysteresis to control the thresholds for resetting alarms. | |
| 89 | Per JC 42.4 specification, the hysteresis threshold can be configured to 0, 1.5, | |
| 90 | 3.0, and 6.0 degrees C. Configured hysteresis values will be rounded to those | |
| 91 | limits. The chip supports only a single register to configure the hysteresis, | |
| 92 | which applies to all limits. This register can be written by writing into | |
| 93 | temp1_crit_hyst. Other hysteresis attributes are read-only. | |
| 94 | ||
| 2c6315da CL |
95 | If the BIOS has configured the sensor for automatic temperature management, it |
| 96 | is likely that it has locked the registers, i.e., that the temperature limits | |
| 97 | cannot be changed. | |
| 98 | ||
| 4453d736 GR |
99 | Sysfs entries |
| 100 | ------------- | |
| 101 | ||
| 102 | temp1_input Temperature (RO) | |
| 2c6315da CL |
103 | temp1_min Minimum temperature (RO or RW) |
| 104 | temp1_max Maximum temperature (RO or RW) | |
| 105 | temp1_crit Critical high temperature (RO or RW) | |
| 4453d736 | 106 | |
| 2c6315da | 107 | temp1_crit_hyst Critical hysteresis temperature (RO or RW) |
| 4453d736 GR |
108 | temp1_max_hyst Maximum hysteresis temperature (RO) |
| 109 | ||
| 110 | temp1_min_alarm Temperature low alarm | |
| 111 | temp1_max_alarm Temperature high alarm | |
| 112 | temp1_crit_alarm Temperature critical alarm |