]>
Commit | Line | Data |
---|---|---|
03e9bd8d GR |
1 | Kernel driver max8688 |
2 | ===================== | |
3 | ||
4 | Supported chips: | |
5 | * National Semiconductor LM25066 | |
6 | Prefix: 'lm25066' | |
7 | Addresses scanned: - | |
8 | Datasheets: | |
9 | http://www.national.com/pf/LM/LM25066.html | |
10 | http://www.national.com/pf/LM/LM25066A.html | |
11 | * National Semiconductor LM5064 | |
12 | Prefix: 'lm5064' | |
13 | Addresses scanned: - | |
14 | Datasheet: | |
15 | http://www.national.com/pf/LM/LM5064.html | |
16 | * National Semiconductor LM5066 | |
17 | Prefix: 'lm5066' | |
18 | Addresses scanned: - | |
19 | Datasheet: | |
20 | http://www.national.com/pf/LM/LM5066.html | |
21 | ||
22 | Author: Guenter Roeck <guenter.roeck@ericsson.com> | |
23 | ||
24 | ||
25 | Description | |
26 | ----------- | |
27 | ||
28 | This driver supports hardware montoring for National Semiconductor LM25066, | |
29 | LM5064, and LM5064 Power Management, Monitoring, Control, and Protection ICs. | |
30 | ||
31 | The driver is a client driver to the core PMBus driver. Please see | |
32 | Documentation/hwmon/pmbus for details on PMBus client drivers. | |
33 | ||
34 | ||
35 | Usage Notes | |
36 | ----------- | |
37 | ||
38 | This driver does not auto-detect devices. You will have to instantiate the | |
39 | devices explicitly. Please see Documentation/i2c/instantiating-devices for | |
40 | details. | |
41 | ||
42 | ||
43 | Platform data support | |
44 | --------------------- | |
45 | ||
46 | The driver supports standard PMBus driver platform data. | |
47 | ||
48 | ||
49 | Sysfs entries | |
50 | ------------- | |
51 | ||
52 | The following attributes are supported. Limits are read-write; all other | |
53 | attributes are read-only. | |
54 | ||
55 | in1_label "vin" | |
56 | in1_input Measured input voltage. | |
57 | in1_average Average measured input voltage. | |
58 | in1_min Minimum input voltage. | |
59 | in1_max Maximum input voltage. | |
60 | in1_min_alarm Input voltage low alarm. | |
61 | in1_max_alarm Input voltage high alarm. | |
62 | ||
63 | in2_label "vout1" | |
64 | in2_input Measured output voltage. | |
65 | in2_average Average measured output voltage. | |
66 | in2_min Minimum output voltage. | |
67 | in2_min_alarm Output voltage low alarm. | |
68 | ||
69 | in3_label "vout2" | |
70 | in3_input Measured voltage on vaux pin | |
71 | ||
72 | curr1_label "iin" | |
73 | curr1_input Measured input current. | |
74 | curr1_average Average measured input current. | |
75 | curr1_max Maximum input current. | |
76 | curr1_max_alarm Input current high alarm. | |
77 | ||
78 | power1_label "pin" | |
79 | power1_input Measured input power. | |
80 | power1_average Average measured input power. | |
81 | power1_max Maximum input power limit. | |
82 | power1_alarm Input power alarm | |
83 | power1_input_highest Historical maximum power. | |
84 | power1_reset_history Write any value to reset maximum power history. | |
85 | ||
86 | temp1_input Measured temperature. | |
87 | temp1_max Maximum temperature. | |
88 | temp1_crit Critical high temperature. | |
89 | temp1_max_alarm Chip temperature high alarm. | |
90 | temp1_crit_alarm Chip temperature critical high alarm. |