]>
Commit | Line | Data |
---|---|---|
44f5a408 GR |
1 | Kernel driver pmbus |
2 | ==================== | |
3 | ||
4 | Supported chips: | |
443830f6 GR |
5 | * Ericsson BMR453, BMR454 |
6 | Prefixes: 'bmr453', 'bmr454' | |
44f5a408 GR |
7 | Addresses scanned: - |
8 | Datasheet: | |
9 | http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146395 | |
e0455e38 GR |
10 | * ON Semiconductor ADP4000, NCP4200, NCP4208 |
11 | Prefixes: 'adp4000', 'ncp4200', 'ncp4208' | |
12 | Addresses scanned: - | |
13 | Datasheets: | |
14 | http://www.onsemi.com/pub_link/Collateral/ADP4000-D.PDF | |
15 | http://www.onsemi.com/pub_link/Collateral/NCP4200-D.PDF | |
16 | http://www.onsemi.com/pub_link/Collateral/JUNE%202009-%20REV.%200.PDF | |
bc365a7f | 17 | * Lineage Power |
21633409 | 18 | Prefixes: 'mdt040', 'pdt003', 'pdt006', 'pdt012', 'udt020' |
bc365a7f GR |
19 | Addresses scanned: - |
20 | Datasheets: | |
21 | http://www.lineagepower.com/oem/pdf/PDT003A0X.pdf | |
22 | http://www.lineagepower.com/oem/pdf/PDT006A0X.pdf | |
23 | http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf | |
24 | http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf | |
21633409 | 25 | http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf |
c5f35c9d GR |
26 | * Texas Instruments TPS40400, TPS40422 |
27 | Prefixes: 'tps40400', 'tps40422' | |
28 | Addresses scanned: - | |
29 | Datasheets: | |
30 | http://www.ti.com/lit/gpn/tps40400 | |
31 | http://www.ti.com/lit/gpn/tps40422 | |
44f5a408 GR |
32 | * Generic PMBus devices |
33 | Prefix: 'pmbus' | |
34 | Addresses scanned: - | |
35 | Datasheet: n.a. | |
36 | ||
e3333e57 | 37 | Author: Guenter Roeck <linux@roeck-us.net> |
44f5a408 GR |
38 | |
39 | ||
40 | Description | |
41 | ----------- | |
42 | ||
43 | This driver supports hardware montoring for various PMBus compliant devices. | |
44 | It supports voltage, current, power, and temperature sensors as supported | |
45 | by the device. | |
46 | ||
47 | Each monitored channel has its own high and low limits, plus a critical | |
48 | limit. | |
49 | ||
50 | Fan support will be added in a later version of this driver. | |
51 | ||
52 | ||
53 | Usage Notes | |
54 | ----------- | |
55 | ||
56 | This driver does not probe for PMBus devices, since there is no register | |
57 | which can be safely used to identify the chip (The MFG_ID register is not | |
58 | supported by all chips), and since there is no well defined address range for | |
59 | PMBus devices. You will have to instantiate the devices explicitly. | |
60 | ||
61 | Example: the following will load the driver for an LTC2978 at address 0x60 | |
62 | on I2C bus #1: | |
63 | $ modprobe pmbus | |
64 | $ echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device | |
65 | ||
66 | ||
67 | Platform data support | |
68 | --------------------- | |
69 | ||
70 | Support for additional PMBus chips can be added by defining chip parameters in | |
71 | a new chip specific driver file. For example, (untested) code to add support for | |
72 | Emerson DS1200 power modules might look as follows. | |
73 | ||
74 | static struct pmbus_driver_info ds1200_info = { | |
75 | .pages = 1, | |
76 | /* Note: All other sensors are in linear mode */ | |
77 | .direct[PSC_VOLTAGE_OUT] = true, | |
78 | .direct[PSC_TEMPERATURE] = true, | |
79 | .direct[PSC_CURRENT_OUT] = true, | |
80 | .m[PSC_VOLTAGE_IN] = 1, | |
81 | .b[PSC_VOLTAGE_IN] = 0, | |
82 | .R[PSC_VOLTAGE_IN] = 3, | |
83 | .m[PSC_VOLTAGE_OUT] = 1, | |
84 | .b[PSC_VOLTAGE_OUT] = 0, | |
85 | .R[PSC_VOLTAGE_OUT] = 3, | |
86 | .m[PSC_TEMPERATURE] = 1, | |
87 | .b[PSC_TEMPERATURE] = 0, | |
88 | .R[PSC_TEMPERATURE] = 3, | |
89 | .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT | |
90 | | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | |
91 | | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | |
92 | | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | |
93 | | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | |
94 | | PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12, | |
95 | }; | |
96 | ||
97 | static int ds1200_probe(struct i2c_client *client, | |
98 | const struct i2c_device_id *id) | |
99 | { | |
100 | return pmbus_do_probe(client, id, &ds1200_info); | |
101 | } | |
102 | ||
103 | static int ds1200_remove(struct i2c_client *client) | |
104 | { | |
105 | return pmbus_do_remove(client); | |
106 | } | |
107 | ||
108 | static const struct i2c_device_id ds1200_id[] = { | |
109 | {"ds1200", 0}, | |
110 | {} | |
111 | }; | |
112 | ||
113 | MODULE_DEVICE_TABLE(i2c, ds1200_id); | |
114 | ||
115 | /* This is the driver that will be inserted */ | |
116 | static struct i2c_driver ds1200_driver = { | |
117 | .driver = { | |
118 | .name = "ds1200", | |
119 | }, | |
120 | .probe = ds1200_probe, | |
121 | .remove = ds1200_remove, | |
122 | .id_table = ds1200_id, | |
123 | }; | |
124 | ||
125 | static int __init ds1200_init(void) | |
126 | { | |
127 | return i2c_add_driver(&ds1200_driver); | |
128 | } | |
129 | ||
130 | static void __exit ds1200_exit(void) | |
131 | { | |
132 | i2c_del_driver(&ds1200_driver); | |
133 | } | |
134 | ||
135 | ||
136 | Sysfs entries | |
137 | ------------- | |
138 | ||
139 | When probing the chip, the driver identifies which PMBus registers are | |
140 | supported, and determines available sensors from this information. | |
02582e9b | 141 | Attribute files only exist if respective sensors are supported by the chip. |
44f5a408 GR |
142 | Labels are provided to inform the user about the sensor associated with |
143 | a given sysfs entry. | |
144 | ||
145 | The following attributes are supported. Limits are read-write; all other | |
146 | attributes are read-only. | |
147 | ||
148 | inX_input Measured voltage. From READ_VIN or READ_VOUT register. | |
25985edc | 149 | inX_min Minimum Voltage. |
44f5a408 GR |
150 | From VIN_UV_WARN_LIMIT or VOUT_UV_WARN_LIMIT register. |
151 | inX_max Maximum voltage. | |
152 | From VIN_OV_WARN_LIMIT or VOUT_OV_WARN_LIMIT register. | |
25985edc | 153 | inX_lcrit Critical minimum Voltage. |
44f5a408 GR |
154 | From VIN_UV_FAULT_LIMIT or VOUT_UV_FAULT_LIMIT register. |
155 | inX_crit Critical maximum voltage. | |
156 | From VIN_OV_FAULT_LIMIT or VOUT_OV_FAULT_LIMIT register. | |
157 | inX_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. | |
158 | inX_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. | |
159 | inX_lcrit_alarm Voltage critical low alarm. | |
160 | From VOLTAGE_UV_FAULT status. | |
161 | inX_crit_alarm Voltage critical high alarm. | |
162 | From VOLTAGE_OV_FAULT status. | |
163 | inX_label "vin", "vcap", or "voutY" | |
164 | ||
165 | currX_input Measured current. From READ_IIN or READ_IOUT register. | |
166 | currX_max Maximum current. | |
167 | From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT register. | |
25985edc | 168 | currX_lcrit Critical minimum output current. |
44f5a408 GR |
169 | From IOUT_UC_FAULT_LIMIT register. |
170 | currX_crit Critical maximum current. | |
171 | From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register. | |
172 | currX_alarm Current high alarm. | |
173 | From IIN_OC_WARNING or IOUT_OC_WARNING status. | |
180b3d88 GR |
174 | currX_max_alarm Current high alarm. |
175 | From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT status. | |
44f5a408 GR |
176 | currX_lcrit_alarm Output current critical low alarm. |
177 | From IOUT_UC_FAULT status. | |
178 | currX_crit_alarm Current critical high alarm. | |
179 | From IIN_OC_FAULT or IOUT_OC_FAULT status. | |
180b3d88 | 180 | currX_label "iin" or "ioutY" |
44f5a408 GR |
181 | |
182 | powerX_input Measured power. From READ_PIN or READ_POUT register. | |
183 | powerX_cap Output power cap. From POUT_MAX register. | |
184 | powerX_max Power limit. From PIN_OP_WARN_LIMIT or | |
185 | POUT_OP_WARN_LIMIT register. | |
186 | powerX_crit Critical output power limit. | |
187 | From POUT_OP_FAULT_LIMIT register. | |
188 | powerX_alarm Power high alarm. | |
189 | From PIN_OP_WARNING or POUT_OP_WARNING status. | |
190 | powerX_crit_alarm Output power critical high alarm. | |
191 | From POUT_OP_FAULT status. | |
192 | powerX_label "pin" or "poutY" | |
193 | ||
180b3d88 | 194 | tempX_input Measured temperature. |
44f5a408 | 195 | From READ_TEMPERATURE_X register. |
180b3d88 GR |
196 | tempX_min Mimimum temperature. From UT_WARN_LIMIT register. |
197 | tempX_max Maximum temperature. From OT_WARN_LIMIT register. | |
198 | tempX_lcrit Critical low temperature. | |
44f5a408 | 199 | From UT_FAULT_LIMIT register. |
180b3d88 | 200 | tempX_crit Critical high temperature. |
44f5a408 GR |
201 | From OT_FAULT_LIMIT register. |
202 | tempX_min_alarm Chip temperature low alarm. Set by comparing | |
203 | READ_TEMPERATURE_X with UT_WARN_LIMIT if | |
204 | TEMP_UT_WARNING status is set. | |
205 | tempX_max_alarm Chip temperature high alarm. Set by comparing | |
206 | READ_TEMPERATURE_X with OT_WARN_LIMIT if | |
207 | TEMP_OT_WARNING status is set. | |
208 | tempX_lcrit_alarm Chip temperature critical low alarm. Set by comparing | |
209 | READ_TEMPERATURE_X with UT_FAULT_LIMIT if | |
210 | TEMP_UT_FAULT status is set. | |
211 | tempX_crit_alarm Chip temperature critical high alarm. Set by comparing | |
212 | READ_TEMPERATURE_X with OT_FAULT_LIMIT if | |
213 | TEMP_OT_FAULT status is set. |