]>
Commit | Line | Data |
---|---|---|
563daaf4 RM |
1 | Kernel driver w83627ehf |
2 | ======================= | |
3 | ||
4 | Supported chips: | |
237c8d2f | 5 | * Winbond W83627EHF/EHG (ISA access ONLY) |
563daaf4 RM |
6 | Prefix: 'w83627ehf' |
7 | Addresses scanned: ISA address retrieved from Super I/O registers | |
96d1eac9 | 8 | Datasheet: not available |
237c8d2f GJ |
9 | * Winbond W83627DHG |
10 | Prefix: 'w83627dhg' | |
11 | Addresses scanned: ISA address retrieved from Super I/O registers | |
96d1eac9 | 12 | Datasheet: not available |
c1e48dce JD |
13 | * Winbond W83627DHG-P |
14 | Prefix: 'w83627dhg' | |
15 | Addresses scanned: ISA address retrieved from Super I/O registers | |
16 | Datasheet: not available | |
eff7687d JD |
17 | * Winbond W83627UHG |
18 | Prefix: 'w83627uhg' | |
19 | Addresses scanned: ISA address retrieved from Super I/O registers | |
20 | Datasheet: available from www.nuvoton.com | |
237c8d2f GJ |
21 | * Winbond W83667HG |
22 | Prefix: 'w83667hg' | |
23 | Addresses scanned: ISA address retrieved from Super I/O registers | |
24 | Datasheet: not available | |
c39aedaf GR |
25 | * Winbond W83667HG-B |
26 | Prefix: 'w83667hg' | |
27 | Addresses scanned: ISA address retrieved from Super I/O registers | |
28 | Datasheet: Available from Nuvoton upon request | |
ec3e5a16 GR |
29 | * Nuvoton NCT6775F/W83667HG-I |
30 | Prefix: 'nct6775' | |
31 | Addresses scanned: ISA address retrieved from Super I/O registers | |
32 | Datasheet: Available from Nuvoton upon request | |
33 | * Nuvoton NCT6776F | |
34 | Prefix: 'nct6776' | |
35 | Addresses scanned: ISA address retrieved from Super I/O registers | |
36 | Datasheet: Available from Nuvoton upon request | |
563daaf4 RM |
37 | |
38 | Authors: | |
7c81c60f | 39 | Jean Delvare <jdelvare@suse.de> |
3379ceee | 40 | Yuan Mu (Winbond) |
7188cc66 | 41 | Rudolf Marek <r.marek@assembler.cz> |
657c93b1 | 42 | David Hubbard <david.c.hubbard@gmail.com> |
237c8d2f | 43 | Gong Jun <JGong@nuvoton.com> |
563daaf4 RM |
44 | |
45 | Description | |
46 | ----------- | |
47 | ||
237c8d2f | 48 | This driver implements support for the Winbond W83627EHF, W83627EHG, |
eff7687d JD |
49 | W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I |
50 | (NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively | |
51 | as Winbond chips. | |
52 | ||
aacb6b00 | 53 | The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F), |
eff7687d JD |
54 | 2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID |
55 | (except for 627UHG), alarms with beep warnings (control unimplemented), | |
ec3e5a16 GR |
56 | and some automatic fan regulation strategies (plus manual fan control mode). |
57 | ||
58 | The temperature sensor sources on W82677HG-B, NCT6775F, and NCT6776F are | |
59 | configurable. temp4 and higher attributes are only reported if its temperature | |
60 | source differs from the temperature sources of the already reported temperature | |
61 | sensors. The configured source for each of the temperature sensors is provided | |
62 | in tempX_label. | |
d36cf32c | 63 | |
563daaf4 | 64 | Temperatures are measured in degrees Celsius and measurement resolution is 1 |
ec3e5a16 GR |
65 | degC for temp1 and and 0.5 degC for temp2 and temp3. For temp4 and higher, |
66 | resolution is 1 degC for W83667HG-B and 0.0 degC for NCT6775F and NCT6776F. | |
67 | An alarm is triggered when the temperature gets higher than high limit; | |
68 | it stays on until the temperature falls below the hysteresis value. | |
69 | Alarms are only supported for temp1, temp2, and temp3. | |
563daaf4 RM |
70 | |
71 | Fan rotation speeds are reported in RPM (rotations per minute). An alarm is | |
72 | triggered if the rotation speed has dropped below a programmable limit. Fan | |
73 | readings can be divided by a programmable divider (1, 2, 4, 8, 16, 32, 64 or | |
74 | 128) to give the readings more range or accuracy. The driver sets the most | |
75 | suitable fan divisor itself. Some fans might not be present because they | |
76 | share pins with other functions. | |
77 | ||
78 | Voltage sensors (also known as IN sensors) report their values in millivolts. | |
79 | An alarm is triggered if the voltage has crossed a programmable minimum | |
80 | or maximum limit. | |
81 | ||
82 | The driver supports automatic fan control mode known as Thermal Cruise. | |
83 | In this mode, the chip attempts to keep the measured temperature in a | |
84 | predefined temperature range. If the temperature goes out of range, fan | |
85 | is driven slower/faster to reach the predefined range again. | |
86 | ||
87 | The mode works for fan1-fan4. Mapping of temperatures to pwm outputs is as | |
88 | follows: | |
89 | ||
90 | temp1 -> pwm1 | |
91 | temp2 -> pwm2 | |
eff7687d | 92 | temp3 -> pwm3 (not on 627UHG) |
c39aedaf GR |
93 | prog -> pwm4 (not on 667HG and 667HG-B; the programmable setting is not |
94 | supported by the driver) | |
563daaf4 RM |
95 | |
96 | /sys files | |
97 | ---------- | |
98 | ||
eff7687d JD |
99 | name - this is a standard hwmon device entry, it contains the name of |
100 | the device (see the prefix in the list of supported devices at | |
101 | the top of this file) | |
657c93b1 | 102 | |
563daaf4 RM |
103 | pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range: |
104 | 0 (stop) to 255 (full) | |
105 | ||
106 | pwm[1-4]_enable - this file controls mode of fan/temperature control: | |
41e9a062 DB |
107 | * 1 Manual mode, write to pwm file any value 0-255 (full speed) |
108 | * 2 "Thermal Cruise" mode | |
109 | * 3 "Fan Speed Cruise" mode | |
110 | * 4 "Smart Fan III" mode | |
ec3e5a16 GR |
111 | * 5 "Smart Fan IV" mode |
112 | ||
113 | SmartFan III mode is not supported on NCT6776F. | |
114 | ||
115 | SmartFan IV mode is configurable only if it was configured at system | |
116 | startup, and is only supported for W83677HG-B, NCT6775F, and NCT6776F. | |
117 | SmartFan IV operational parameters can not be configured at this time, | |
118 | and the various pwm attributes are not used in SmartFan IV mode. | |
119 | The attributes can be written to, which is useful if you plan to | |
120 | configure the system for a different pwm mode. However, the information | |
121 | returned when reading pwm attributes is unrelated to SmartFan IV | |
122 | operation. | |
41e9a062 DB |
123 | |
124 | pwm[1-4]_mode - controls if output is PWM or DC level | |
125 | * 0 DC output (0 - 12v) | |
126 | * 1 PWM output | |
563daaf4 RM |
127 | |
128 | Thermal Cruise mode | |
129 | ------------------- | |
130 | ||
131 | If the temperature is in the range defined by: | |
132 | ||
15fe25ca | 133 | pwm[1-4]_target - set target temperature, unit millidegree Celsius |
563daaf4 | 134 | (range 0 - 127000) |
15fe25ca | 135 | pwm[1-4]_tolerance - tolerance, unit millidegree Celsius (range 0 - 15000) |
563daaf4 RM |
136 | |
137 | there are no changes to fan speed. Once the temperature leaves the interval, | |
138 | fan speed increases (temp is higher) or decreases if lower than desired. | |
139 | There are defined steps and times, but not exported by the driver yet. | |
140 | ||
141 | pwm[1-4]_min_output - minimum fan speed (range 1 - 255), when the temperature | |
142 | is below defined range. | |
143 | pwm[1-4]_stop_time - how many milliseconds [ms] must elapse to switch | |
144 | corresponding fan off. (when the temperature was below | |
145 | defined range). | |
c43524b5 GR |
146 | pwm[1-4]_start_output-minimum fan speed (range 1 - 255) when spinning up |
147 | pwm[1-4]_step_output- rate of fan speed change (1 - 255) | |
148 | pwm[1-4]_stop_output- minimum fan speed (range 1 - 255) when spinning down | |
149 | pwm[1-4]_max_output - maximum fan speed (range 1 - 255), when the temperature | |
150 | is above defined range. | |
563daaf4 | 151 | |
c43524b5 | 152 | Note: last six functions are influenced by other control bits, not yet exported |
563daaf4 | 153 | by the driver, so a change might not have any effect. |
657c93b1 DH |
154 | |
155 | Implementation Details | |
156 | ---------------------- | |
157 | ||
158 | Future driver development should bear in mind that the following registers have | |
159 | different functions on the 627EHF and the 627DHG. Some registers also have | |
160 | different power-on default values, but BIOS should already be loading | |
161 | appropriate defaults. Note that bank selection must be performed as is currently | |
162 | done in the driver for all register addresses. | |
163 | ||
164 | 0x49: only on DHG, selects temperature source for AUX fan, CPU fan0 | |
165 | 0x4a: not completely documented for the EHF and the DHG documentation assigns | |
166 | different behavior to bits 7 and 6, including extending the temperature | |
167 | input selection to SmartFan I, not just SmartFan III. Testing on the EHF | |
168 | will reveal whether they are compatible or not. | |
169 | ||
170 | 0x58: Chip ID: 0xa1=EHF 0xc1=DHG | |
171 | 0x5e: only on DHG, has bits to enable "current mode" temperature detection and | |
172 | critical temperature protection | |
173 | 0x45b: only on EHF, bit 3, vin4 alarm (EHF supports 10 inputs, only 9 on DHG) | |
174 | 0x552: only on EHF, vin4 | |
175 | 0x558: only on EHF, vin4 high limit | |
176 | 0x559: only on EHF, vin4 low limit | |
177 | 0x6b: only on DHG, SYS fan critical temperature | |
178 | 0x6c: only on DHG, CPU fan0 critical temperature | |
179 | 0x6d: only on DHG, AUX fan critical temperature | |
180 | 0x6e: only on DHG, CPU fan1 critical temperature | |
181 | ||
182 | 0x50-0x55 and 0x650-0x657 are marked "Test Register" for the EHF, but "Reserved | |
183 | Register" for the DHG | |
184 | ||
185 | The DHG also supports PECI, where the DHG queries Intel CPU temperatures, and | |
186 | the ICH8 southbridge gets that data via PECI from the DHG, so that the | |
187 | southbridge drives the fans. And the DHG supports SST, a one-wire serial bus. | |
c1e48dce JD |
188 | |
189 | The DHG-P has an additional automatic fan speed control mode named Smart Fan | |
190 | (TM) III+. This mode is not yet supported by the driver. |