]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | $Id: gameport-programming.txt,v 1.3 2001/04/24 13:51:37 vojtech Exp $ |
2 | ||
3 | Programming gameport drivers | |
4 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
5 | ||
6 | 1. A basic classic gameport | |
7 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
8 | ||
9 | If the gameport doesn't provide more than the inb()/outb() functionality, | |
10 | the code needed to register it with the joystick drivers is simple: | |
11 | ||
12 | struct gameport gameport; | |
13 | ||
14 | gameport.io = MY_IO_ADDRESS; | |
15 | gameport_register_port(&gameport); | |
16 | ||
17 | Make sure struct gameport is initialized to 0 in all other fields. The | |
18 | gameport generic code will take care of the rest. | |
19 | ||
20 | If your hardware supports more than one io address, and your driver can | |
2fe0ae78 ML |
21 | choose which one to program the hardware to, starting from the more exotic |
22 | addresses is preferred, because the likelihood of clashing with the standard | |
1da177e4 LT |
23 | 0x201 address is smaller. |
24 | ||
25 | Eg. if your driver supports addresses 0x200, 0x208, 0x210 and 0x218, then | |
26 | 0x218 would be the address of first choice. | |
27 | ||
28 | If your hardware supports a gameport address that is not mapped to ISA io | |
29 | space (is above 0x1000), use that one, and don't map the ISA mirror. | |
30 | ||
31 | Also, always request_region() on the whole io space occupied by the | |
32 | gameport. Although only one ioport is really used, the gameport usually | |
33 | occupies from one to sixteen addresses in the io space. | |
34 | ||
35 | Please also consider enabling the gameport on the card in the ->open() | |
36 | callback if the io is mapped to ISA space - this way it'll occupy the io | |
37 | space only when something really is using it. Disable it again in the | |
38 | ->close() callback. You also can select the io address in the ->open() | |
39 | callback, so that it doesn't fail if some of the possible addresses are | |
40 | already occupied by other gameports. | |
41 | ||
42 | 2. Memory mapped gameport | |
43 | ~~~~~~~~~~~~~~~~~~~~~~~~~ | |
44 | ||
45 | When a gameport can be accessed through MMIO, this way is preferred, because | |
46 | it is faster, allowing more reads per second. Registering such a gameport | |
47 | isn't as easy as a basic IO one, but not so much complex: | |
48 | ||
49 | struct gameport gameport; | |
50 | ||
51 | void my_trigger(struct gameport *gameport) | |
52 | { | |
53 | my_mmio = 0xff; | |
54 | } | |
55 | ||
56 | unsigned char my_read(struct gameport *gameport) | |
57 | { | |
58 | return my_mmio; | |
59 | } | |
60 | ||
61 | gameport.read = my_read; | |
62 | gameport.trigger = my_trigger; | |
63 | gameport_register_port(&gameport); | |
64 | ||
65 | 3. Cooked mode gameport | |
66 | ~~~~~~~~~~~~~~~~~~~~~~~ | |
67 | ||
68 | There are gameports that can report the axis values as numbers, that means | |
69 | the driver doesn't have to measure them the old way - an ADC is built into | |
70 | the gameport. To register a cooked gameport: | |
71 | ||
72 | struct gameport gameport; | |
73 | ||
74 | int my_cooked_read(struct gameport *gameport, int *axes, int *buttons) | |
75 | { | |
76 | int i; | |
77 | ||
78 | for (i = 0; i < 4; i++) | |
79 | axes[i] = my_mmio[i]; | |
80 | buttons[i] = my_mmio[4]; | |
81 | } | |
82 | ||
83 | int my_open(struct gameport *gameport, int mode) | |
84 | { | |
85 | return -(mode != GAMEPORT_MODE_COOKED); | |
86 | } | |
87 | ||
88 | gameport.cooked_read = my_cooked_read; | |
89 | gameport.open = my_open; | |
90 | gameport.fuzz = 8; | |
91 | gameport_register_port(&gameport); | |
92 | ||
93 | The only confusing thing here is the fuzz value. Best determined by | |
94 | experimentation, it is the amount of noise in the ADC data. Perfect | |
95 | gameports can set this to zero, most common have fuzz between 8 and 32. | |
96 | See analog.c and input.c for handling of fuzz - the fuzz value determines | |
97 | the size of a gaussian filter window that is used to eliminate the noise | |
98 | in the data. | |
99 | ||
100 | 4. More complex gameports | |
101 | ~~~~~~~~~~~~~~~~~~~~~~~~~ | |
102 | ||
103 | Gameports can support both raw and cooked modes. In that case combine either | |
104 | examples 1+2 or 1+3. Gameports can support internal calibration - see below, | |
105 | and also lightning.c and analog.c on how that works. If your driver supports | |
106 | more than one gameport instance simultaneously, use the ->private member of | |
107 | the gameport struct to point to your data. | |
108 | ||
109 | 5. Unregistering a gameport | |
110 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
111 | ||
112 | Simple: | |
113 | ||
114 | gameport_unregister_port(&gameport); | |
115 | ||
116 | 6. The gameport structure | |
117 | ~~~~~~~~~~~~~~~~~~~~~~~~~ | |
118 | ||
119 | struct gameport { | |
120 | ||
121 | void *private; | |
122 | ||
123 | A private pointer for free use in the gameport driver. (Not the joystick | |
124 | driver!) | |
125 | ||
126 | int number; | |
127 | ||
128 | Number assigned to the gameport when registered. Informational purpose only. | |
129 | ||
130 | int io; | |
131 | ||
132 | I/O address for use with raw mode. You have to either set this, or ->read() | |
133 | to some value if your gameport supports raw mode. | |
134 | ||
135 | int speed; | |
136 | ||
137 | Raw mode speed of the gameport reads in thousands of reads per second. | |
138 | ||
139 | int fuzz; | |
140 | ||
141 | If the gameport supports cooked mode, this should be set to a value that | |
142 | represents the amount of noise in the data. See section 3. | |
143 | ||
144 | void (*trigger)(struct gameport *); | |
145 | ||
146 | Trigger. This function should trigger the ns558 oneshots. If set to NULL, | |
147 | outb(0xff, io) will be used. | |
148 | ||
149 | unsigned char (*read)(struct gameport *); | |
150 | ||
151 | Read the buttons and ns558 oneshot bits. If set to NULL, inb(io) will be | |
152 | used instead. | |
153 | ||
154 | int (*cooked_read)(struct gameport *, int *axes, int *buttons); | |
155 | ||
156 | If the gameport supports cooked mode, it should point this to its cooked | |
157 | read function. It should fill axes[0..3] with four values of the joystick axes | |
158 | and buttons[0] with four bits representing the buttons. | |
159 | ||
160 | int (*calibrate)(struct gameport *, int *axes, int *max); | |
161 | ||
162 | Function for calibrating the ADC hardware. When called, axes[0..3] should be | |
163 | pre-filled by cooked data by the caller, max[0..3] should be pre-filled with | |
164 | expected maximums for each axis. The calibrate() function should set the | |
165 | sensitivity of the ADC hardware so that the maximums fit in its range and | |
166 | recompute the axes[] values to match the new sensitivity or re-read them from | |
167 | the hardware so that they give valid values. | |
168 | ||
169 | int (*open)(struct gameport *, int mode); | |
170 | ||
171 | Open() serves two purposes. First a driver either opens the port in raw or | |
172 | in cooked mode, the open() callback can decide which modes are supported. | |
173 | Second, resource allocation can happen here. The port can also be enabled | |
174 | here. Prior to this call, other fields of the gameport struct (namely the io | |
175 | member) need not to be valid. | |
176 | ||
177 | void (*close)(struct gameport *); | |
178 | ||
179 | Close() should free the resources allocated by open, possibly disabling the | |
180 | gameport. | |
181 | ||
182 | struct gameport_dev *dev; | |
183 | struct gameport *next; | |
184 | ||
185 | For internal use by the gameport layer. | |
186 | ||
187 | }; | |
188 | ||
189 | Enjoy! |