]>
Commit | Line | Data |
---|---|---|
f6d23df5 TI |
1 | ============================================================== |
2 | Advanced Linux Sound Architecture - Driver Configuration guide | |
3 | ============================================================== | |
4 | ||
5 | ||
6 | Kernel Configuration | |
7 | ==================== | |
8 | ||
9 | To enable ALSA support you need at least to build the kernel with | |
10 | primary sound card support (``CONFIG_SOUND``). Since ALSA can emulate | |
11 | OSS, you don't have to choose any of the OSS modules. | |
12 | ||
13 | Enable "OSS API emulation" (``CONFIG_SND_OSSEMUL``) and both OSS mixer | |
14 | and PCM supports if you want to run OSS applications with ALSA. | |
15 | ||
16 | If you want to support the WaveTable functionality on cards such as | |
17 | SB Live! then you need to enable "Sequencer support" | |
18 | (``CONFIG_SND_SEQUENCER``). | |
19 | ||
20 | To make ALSA debug messages more verbose, enable the "Verbose printk" | |
21 | and "Debug" options. To check for memory leaks, turn on "Debug memory" | |
22 | too. "Debug detection" will add checks for the detection of cards. | |
23 | ||
24 | Please note that all the ALSA ISA drivers support the Linux isapnp API | |
25 | (if the card supports ISA PnP). You don't need to configure the cards | |
26 | using isapnptools. | |
27 | ||
28 | ||
29 | Module parameters | |
30 | ================= | |
31 | ||
32 | The user can load modules with options. If the module supports more than | |
33 | one card and you have more than one card of the same type then you can | |
34 | specify multiple values for the option separated by commas. | |
35 | ||
36 | ||
37 | Module snd | |
38 | ---------- | |
39 | ||
40 | The core ALSA module. It is used by all ALSA card drivers. | |
41 | It takes the following options which have global effects. | |
42 | ||
43 | major | |
44 | major number for sound driver; | |
45 | Default: 116 | |
46 | cards_limit | |
47 | limiting card index for auto-loading (1-8); | |
48 | Default: 1; | |
49 | For auto-loading more than one card, specify this option | |
50 | together with snd-card-X aliases. | |
51 | slots | |
52 | Reserve the slot index for the given driver; | |
53 | This option takes multiple strings. | |
54 | See `Module Autoloading Support`_ section for details. | |
55 | debug | |
56 | Specifies the debug message level; | |
57 | (0 = disable debug prints, 1 = normal debug messages, | |
58 | 2 = verbose debug messages); | |
59 | This option appears only when ``CONFIG_SND_DEBUG=y``. | |
60 | This option can be dynamically changed via sysfs | |
61 | /sys/modules/snd/parameters/debug file. | |
62 | ||
63 | Module snd-pcm-oss | |
64 | ------------------ | |
65 | ||
66 | The PCM OSS emulation module. | |
67 | This module takes options which change the mapping of devices. | |
68 | ||
69 | dsp_map | |
70 | PCM device number maps assigned to the 1st OSS device; | |
71 | Default: 0 | |
72 | adsp_map | |
73 | PCM device number maps assigned to the 2st OSS device; | |
74 | Default: 1 | |
75 | nonblock_open | |
76 | Don't block opening busy PCM devices; | |
77 | Default: 1 | |
78 | ||
79 | For example, when ``dsp_map=2``, /dev/dsp will be mapped to PCM #2 of | |
80 | the card #0. Similarly, when ``adsp_map=0``, /dev/adsp will be mapped | |
81 | to PCM #0 of the card #0. | |
82 | For changing the second or later card, specify the option with | |
83 | commas, such like ``dsp_map=0,1``. | |
84 | ||
85 | ``nonblock_open`` option is used to change the behavior of the PCM | |
86 | regarding opening the device. When this option is non-zero, | |
87 | opening a busy OSS PCM device won't be blocked but return | |
88 | immediately with EAGAIN (just like O_NONBLOCK flag). | |
89 | ||
90 | Module snd-rawmidi | |
91 | ------------------ | |
92 | ||
93 | This module takes options which change the mapping of devices. | |
94 | similar to those of the snd-pcm-oss module. | |
95 | ||
96 | midi_map | |
97 | MIDI device number maps assigned to the 1st OSS device; | |
98 | Default: 0 | |
99 | amidi_map | |
100 | MIDI device number maps assigned to the 2st OSS device; | |
101 | Default: 1 | |
102 | ||
103 | Common parameters for top sound card modules | |
104 | -------------------------------------------- | |
105 | ||
106 | Each of top level sound card module takes the following options. | |
107 | ||
108 | index | |
109 | index (slot #) of sound card; | |
110 | Values: 0 through 31 or negative; | |
111 | If nonnegative, assign that index number; | |
112 | if negative, interpret as a bitmask of permissible indices; | |
113 | the first free permitted index is assigned; | |
114 | Default: -1 | |
115 | id | |
116 | card ID (identifier or name); | |
117 | Can be up to 15 characters long; | |
118 | Default: the card type; | |
119 | A directory by this name is created under /proc/asound/ | |
120 | containing information about the card; | |
121 | This ID can be used instead of the index number in | |
122 | identifying the card | |
123 | enable | |
124 | enable card; | |
125 | Default: enabled, for PCI and ISA PnP cards | |
126 | ||
127 | Module snd-adlib | |
128 | ---------------- | |
129 | ||
130 | Module for AdLib FM cards. | |
131 | ||
132 | port | |
133 | port # for OPL chip | |
134 | ||
135 | This module supports multiple cards. It does not support autoprobe, so | |
136 | the port must be specified. For actual AdLib FM cards it will be 0x388. | |
137 | Note that this card does not have PCM support and no mixer; only FM | |
138 | synthesis. | |
139 | ||
140 | Make sure you have ``sbiload`` from the alsa-tools package available and, | |
141 | after loading the module, find out the assigned ALSA sequencer port | |
142 | number through ``sbiload -l``. | |
143 | ||
144 | Example output: | |
145 | :: | |
146 | ||
147 | Port Client name Port name | |
148 | 64:0 OPL2 FM synth OPL2 FM Port | |
149 | ||
150 | Load the ``std.sb`` and ``drums.sb`` patches also supplied by ``sbiload``: | |
151 | :: | |
152 | ||
153 | sbiload -p 64:0 std.sb drums.sb | |
154 | ||
155 | If you use this driver to drive an OPL3, you can use ``std.o3`` and ``drums.o3`` | |
156 | instead. To have the card produce sound, use ``aplaymidi`` from alsa-utils: | |
157 | :: | |
158 | ||
159 | aplaymidi -p 64:0 foo.mid | |
160 | ||
161 | Module snd-ad1816a | |
162 | ------------------ | |
163 | ||
164 | Module for sound cards based on Analog Devices AD1816A/AD1815 ISA chips. | |
165 | ||
166 | clockfreq | |
167 | Clock frequency for AD1816A chip (default = 0, 33000Hz) | |
168 | ||
169 | This module supports multiple cards, autoprobe and PnP. | |
170 | ||
171 | Module snd-ad1848 | |
172 | ----------------- | |
173 | ||
174 | Module for sound cards based on AD1848/AD1847/CS4248 ISA chips. | |
175 | ||
176 | port | |
177 | port # for AD1848 chip | |
178 | irq | |
179 | IRQ # for AD1848 chip | |
180 | dma1 | |
181 | DMA # for AD1848 chip (0,1,3) | |
182 | ||
183 | This module supports multiple cards. It does not support autoprobe | |
184 | thus main port must be specified!!! Other ports are optional. | |
185 | ||
186 | The power-management is supported. | |
187 | ||
188 | Module snd-ad1889 | |
189 | ----------------- | |
190 | ||
191 | Module for Analog Devices AD1889 chips. | |
192 | ||
193 | ac97_quirk | |
194 | AC'97 workaround for strange hardware; | |
195 | See the description of intel8x0 module for details. | |
196 | ||
197 | This module supports multiple cards. | |
198 | ||
199 | Module snd-ali5451 | |
200 | ------------------ | |
201 | ||
202 | Module for ALi M5451 PCI chip. | |
203 | ||
204 | pcm_channels | |
205 | Number of hardware channels assigned for PCM | |
206 | spdif | |
207 | Support SPDIF I/O; | |
208 | Default: disabled | |
209 | ||
210 | This module supports one chip and autoprobe. | |
211 | ||
212 | The power-management is supported. | |
213 | ||
214 | Module snd-als100 | |
215 | ----------------- | |
216 | ||
217 | Module for sound cards based on Avance Logic ALS100/ALS120 ISA chips. | |
218 | ||
219 | This module supports multiple cards, autoprobe and PnP. | |
220 | ||
221 | The power-management is supported. | |
222 | ||
223 | Module snd-als300 | |
224 | ----------------- | |
225 | ||
226 | Module for Avance Logic ALS300 and ALS300+ | |
227 | ||
228 | This module supports multiple cards. | |
229 | ||
230 | The power-management is supported. | |
231 | ||
232 | Module snd-als4000 | |
233 | ------------------ | |
234 | ||
235 | Module for sound cards based on Avance Logic ALS4000 PCI chip. | |
236 | ||
237 | joystick_port | |
238 | port # for legacy joystick support; | |
239 | 0 = disabled (default), 1 = auto-detect | |
240 | ||
241 | This module supports multiple cards, autoprobe and PnP. | |
242 | ||
243 | The power-management is supported. | |
244 | ||
245 | Module snd-asihpi | |
246 | ----------------- | |
247 | ||
248 | Module for AudioScience ASI soundcards | |
249 | ||
250 | enable_hpi_hwdep | |
251 | enable HPI hwdep for AudioScience soundcard | |
252 | ||
253 | This module supports multiple cards. | |
254 | The driver requires the firmware loader support on kernel. | |
255 | ||
256 | Module snd-atiixp | |
257 | ----------------- | |
258 | ||
259 | Module for ATI IXP 150/200/250/400 AC97 controllers. | |
260 | ||
261 | ac97_clock | |
262 | AC'97 clock (default = 48000) | |
263 | ac97_quirk | |
264 | AC'97 workaround for strange hardware; | |
265 | See `AC97 Quirk Option`_ section below. | |
266 | ac97_codec | |
267 | Workaround to specify which AC'97 codec instead of probing. | |
268 | If this works for you file a bug with your `lspci -vn` output. | |
269 | (-2 = Force probing, -1 = Default behavior, 0-2 = Use the | |
270 | specified codec.) | |
271 | spdif_aclink | |
272 | S/PDIF transfer over AC-link (default = 1) | |
273 | ||
274 | This module supports one card and autoprobe. | |
275 | ||
276 | ATI IXP has two different methods to control SPDIF output. One is | |
277 | over AC-link and another is over the "direct" SPDIF output. The | |
278 | implementation depends on the motherboard, and you'll need to | |
279 | choose the correct one via spdif_aclink module option. | |
280 | ||
281 | The power-management is supported. | |
282 | ||
283 | Module snd-atiixp-modem | |
284 | ----------------------- | |
285 | ||
286 | Module for ATI IXP 150/200/250 AC97 modem controllers. | |
287 | ||
288 | This module supports one card and autoprobe. | |
289 | ||
290 | Note: The default index value of this module is -2, i.e. the first | |
291 | slot is excluded. | |
292 | ||
293 | The power-management is supported. | |
294 | ||
295 | Module snd-au8810, snd-au8820, snd-au8830 | |
296 | ----------------------------------------- | |
297 | ||
298 | Module for Aureal Vortex, Vortex2 and Advantage device. | |
299 | ||
300 | pcifix | |
301 | Control PCI workarounds; | |
302 | 0 = Disable all workarounds, | |
303 | 1 = Force the PCI latency of the Aureal card to 0xff, | |
304 | 2 = Force the Extend PCI#2 Internal Master for Efficient | |
305 | Handling of Dummy Requests on the VIA KT133 AGP Bridge, | |
306 | 3 = Force both settings, | |
307 | 255 = Autodetect what is required (default) | |
308 | ||
309 | This module supports all ADB PCM channels, ac97 mixer, SPDIF, hardware | |
310 | EQ, mpu401, gameport. A3D and wavetable support are still in development. | |
311 | Development and reverse engineering work is being coordinated at | |
312 | http://savannah.nongnu.org/projects/openvortex/ | |
313 | SPDIF output has a copy of the AC97 codec output, unless you use the | |
314 | ``spdif`` pcm device, which allows raw data passthru. | |
315 | The hardware EQ hardware and SPDIF is only present in the Vortex2 and | |
316 | Advantage. | |
317 | ||
318 | Note: Some ALSA mixer applications don't handle the SPDIF sample rate | |
319 | control correctly. If you have problems regarding this, try | |
320 | another ALSA compliant mixer (alsamixer works). | |
321 | ||
322 | Module snd-azt1605 | |
323 | ------------------ | |
324 | ||
325 | Module for Aztech Sound Galaxy soundcards based on the Aztech AZT1605 | |
326 | chipset. | |
327 | ||
328 | port | |
329 | port # for BASE (0x220,0x240,0x260,0x280) | |
330 | wss_port | |
331 | port # for WSS (0x530,0x604,0xe80,0xf40) | |
332 | irq | |
333 | IRQ # for WSS (7,9,10,11) | |
334 | dma1 | |
335 | DMA # for WSS playback (0,1,3) | |
336 | dma2 | |
337 | DMA # for WSS capture (0,1), -1 = disabled (default) | |
338 | mpu_port | |
339 | port # for MPU-401 UART (0x300,0x330), -1 = disabled (default) | |
340 | mpu_irq | |
341 | IRQ # for MPU-401 UART (3,5,7,9), -1 = disabled (default) | |
342 | fm_port | |
343 | port # for OPL3 (0x388), -1 = disabled (default) | |
344 | ||
345 | This module supports multiple cards. It does not support autoprobe: | |
346 | ``port``, ``wss_port``, ``irq`` and ``dma1`` have to be specified. | |
347 | The other values are optional. | |
348 | ||
349 | ``port`` needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240) | |
350 | or the value stored in the card's EEPROM for cards that have an EEPROM and | |
351 | their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can | |
352 | be chosen freely from the options enumerated above. | |
353 | ||
354 | If ``dma2`` is specified and different from ``dma1``, the card will operate in | |
355 | full-duplex mode. When ``dma1=3``, only ``dma2=0`` is valid and the only way to | |
356 | enable capture since only channels 0 and 1 are available for capture. | |
357 | ||
358 | Generic settings are ``port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0 | |
359 | mpu_port=0x330 mpu_irq=9 fm_port=0x388``. | |
360 | ||
361 | Whatever IRQ and DMA channels you pick, be sure to reserve them for | |
362 | legacy ISA in your BIOS. | |
363 | ||
364 | Module snd-azt2316 | |
365 | ------------------ | |
366 | ||
367 | Module for Aztech Sound Galaxy soundcards based on the Aztech AZT2316 | |
368 | chipset. | |
369 | ||
370 | port | |
371 | port # for BASE (0x220,0x240,0x260,0x280) | |
372 | wss_port | |
373 | port # for WSS (0x530,0x604,0xe80,0xf40) | |
374 | irq | |
375 | IRQ # for WSS (7,9,10,11) | |
376 | dma1 | |
377 | DMA # for WSS playback (0,1,3) | |
378 | dma2 | |
379 | DMA # for WSS capture (0,1), -1 = disabled (default) | |
380 | mpu_port | |
381 | port # for MPU-401 UART (0x300,0x330), -1 = disabled (default) | |
382 | mpu_irq | |
383 | IRQ # for MPU-401 UART (5,7,9,10), -1 = disabled (default) | |
384 | fm_port | |
385 | port # for OPL3 (0x388), -1 = disabled (default) | |
386 | ||
387 | This module supports multiple cards. It does not support autoprobe: | |
388 | ``port``, ``wss_port``, ``irq`` and ``dma1`` have to be specified. | |
389 | The other values are optional. | |
390 | ||
391 | ``port`` needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240) | |
392 | or the value stored in the card's EEPROM for cards that have an EEPROM and | |
393 | their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can | |
394 | be chosen freely from the options enumerated above. | |
395 | ||
396 | If ``dma2`` is specified and different from ``dma1``, the card will operate in | |
397 | full-duplex mode. When ``dma1=3``, only ``dma2=0`` is valid and the only way to | |
398 | enable capture since only channels 0 and 1 are available for capture. | |
399 | ||
400 | Generic settings are ``port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0 | |
401 | mpu_port=0x330 mpu_irq=9 fm_port=0x388``. | |
402 | ||
403 | Whatever IRQ and DMA channels you pick, be sure to reserve them for | |
404 | legacy ISA in your BIOS. | |
405 | ||
406 | Module snd-aw2 | |
407 | -------------- | |
408 | ||
409 | Module for Audiowerk2 sound card | |
410 | ||
411 | This module supports multiple cards. | |
412 | ||
413 | Module snd-azt2320 | |
414 | ------------------ | |
415 | ||
416 | Module for sound cards based on Aztech System AZT2320 ISA chip (PnP only). | |
417 | ||
418 | This module supports multiple cards, PnP and autoprobe. | |
419 | ||
420 | The power-management is supported. | |
421 | ||
422 | Module snd-azt3328 | |
423 | ------------------ | |
424 | ||
425 | Module for sound cards based on Aztech AZF3328 PCI chip. | |
426 | ||
427 | joystick | |
428 | Enable joystick (default off) | |
429 | ||
430 | This module supports multiple cards. | |
431 | ||
432 | Module snd-bt87x | |
433 | ---------------- | |
434 | ||
435 | Module for video cards based on Bt87x chips. | |
436 | ||
437 | digital_rate | |
438 | Override the default digital rate (Hz) | |
439 | load_all | |
440 | Load the driver even if the card model isn't known | |
441 | ||
442 | This module supports multiple cards. | |
443 | ||
444 | Note: The default index value of this module is -2, i.e. the first | |
445 | slot is excluded. | |
446 | ||
447 | Module snd-ca0106 | |
448 | ----------------- | |
449 | ||
450 | Module for Creative Audigy LS and SB Live 24bit | |
451 | ||
452 | This module supports multiple cards. | |
453 | ||
454 | ||
455 | Module snd-cmi8330 | |
456 | ------------------ | |
457 | ||
458 | Module for sound cards based on C-Media CMI8330 ISA chips. | |
459 | ||
460 | isapnp | |
461 | ISA PnP detection - 0 = disable, 1 = enable (default) | |
462 | ||
463 | with ``isapnp=0``, the following options are available: | |
464 | ||
465 | wssport | |
466 | port # for CMI8330 chip (WSS) | |
467 | wssirq | |
468 | IRQ # for CMI8330 chip (WSS) | |
469 | wssdma | |
470 | first DMA # for CMI8330 chip (WSS) | |
471 | sbport | |
472 | port # for CMI8330 chip (SB16) | |
473 | sbirq | |
474 | IRQ # for CMI8330 chip (SB16) | |
475 | sbdma8 | |
476 | 8bit DMA # for CMI8330 chip (SB16) | |
477 | sbdma16 | |
478 | 16bit DMA # for CMI8330 chip (SB16) | |
479 | fmport | |
480 | (optional) OPL3 I/O port | |
481 | mpuport | |
482 | (optional) MPU401 I/O port | |
483 | mpuirq | |
484 | (optional) MPU401 irq # | |
485 | ||
486 | This module supports multiple cards and autoprobe. | |
487 | ||
488 | The power-management is supported. | |
489 | ||
490 | Module snd-cmipci | |
491 | ----------------- | |
492 | ||
493 | Module for C-Media CMI8338/8738/8768/8770 PCI sound cards. | |
494 | ||
495 | mpu_port | |
496 | port address of MIDI interface (8338 only): | |
497 | 0x300,0x310,0x320,0x330 = legacy port, | |
498 | 0 = disable (default) | |
499 | fm_port | |
500 | port address of OPL-3 FM synthesizer (8x38 only): | |
501 | 0x388 = legacy port, | |
502 | 1 = integrated PCI port (default on 8738), | |
503 | 0 = disable | |
504 | soft_ac3 | |
505 | Software-conversion of raw SPDIF packets (model 033 only) (default = 1) | |
506 | joystick_port | |
507 | Joystick port address (0 = disable, 1 = auto-detect) | |
508 | ||
509 | This module supports autoprobe and multiple cards. | |
510 | ||
511 | The power-management is supported. | |
512 | ||
513 | Module snd-cs4231 | |
514 | ----------------- | |
515 | ||
516 | Module for sound cards based on CS4231 ISA chips. | |
517 | ||
518 | port | |
519 | port # for CS4231 chip | |
520 | mpu_port | |
521 | port # for MPU-401 UART (optional), -1 = disable | |
522 | irq | |
523 | IRQ # for CS4231 chip | |
524 | mpu_irq | |
525 | IRQ # for MPU-401 UART | |
526 | dma1 | |
527 | first DMA # for CS4231 chip | |
528 | dma2 | |
529 | second DMA # for CS4231 chip | |
530 | ||
531 | This module supports multiple cards. This module does not support autoprobe | |
532 | thus main port must be specified!!! Other ports are optional. | |
533 | ||
534 | The power-management is supported. | |
535 | ||
536 | Module snd-cs4236 | |
537 | ----------------- | |
538 | ||
539 | Module for sound cards based on CS4232/CS4232A, | |
540 | CS4235/CS4236/CS4236B/CS4237B/CS4238B/CS4239 ISA chips. | |
541 | ||
542 | isapnp | |
543 | ISA PnP detection - 0 = disable, 1 = enable (default) | |
544 | ||
545 | with ``isapnp=0``, the following options are available: | |
546 | ||
547 | port | |
548 | port # for CS4236 chip (PnP setup - 0x534) | |
549 | cport | |
550 | control port # for CS4236 chip (PnP setup - 0x120,0x210,0xf00) | |
551 | mpu_port | |
552 | port # for MPU-401 UART (PnP setup - 0x300), -1 = disable | |
553 | fm_port | |
554 | FM port # for CS4236 chip (PnP setup - 0x388), -1 = disable | |
555 | irq | |
556 | IRQ # for CS4236 chip (5,7,9,11,12,15) | |
557 | mpu_irq | |
558 | IRQ # for MPU-401 UART (9,11,12,15) | |
559 | dma1 | |
560 | first DMA # for CS4236 chip (0,1,3) | |
561 | dma2 | |
562 | second DMA # for CS4236 chip (0,1,3), -1 = disable | |
563 | ||
564 | This module supports multiple cards. This module does not support autoprobe | |
565 | (if ISA PnP is not used) thus main port and control port must be | |
566 | specified!!! Other ports are optional. | |
567 | ||
568 | The power-management is supported. | |
569 | ||
570 | This module is aliased as snd-cs4232 since it provides the old | |
571 | snd-cs4232 functionality, too. | |
572 | ||
573 | Module snd-cs4281 | |
574 | ----------------- | |
575 | ||
576 | Module for Cirrus Logic CS4281 soundchip. | |
577 | ||
578 | dual_codec | |
579 | Secondary codec ID (0 = disable, default) | |
580 | ||
581 | This module supports multiple cards. | |
582 | ||
583 | The power-management is supported. | |
584 | ||
585 | Module snd-cs46xx | |
586 | ----------------- | |
587 | ||
588 | Module for PCI sound cards based on CS4610/CS4612/CS4614/CS4615/CS4622/ | |
589 | CS4624/CS4630/CS4280 PCI chips. | |
590 | ||
591 | external_amp | |
592 | Force to enable external amplifier. | |
593 | thinkpad | |
594 | Force to enable Thinkpad's CLKRUN control. | |
595 | mmap_valid | |
596 | Support OSS mmap mode (default = 0). | |
597 | ||
598 | This module supports multiple cards and autoprobe. | |
599 | Usually external amp and CLKRUN controls are detected automatically | |
600 | from PCI sub vendor/device ids. If they don't work, give the options | |
601 | above explicitly. | |
602 | ||
603 | The power-management is supported. | |
604 | ||
605 | Module snd-cs5530 | |
606 | ----------------- | |
607 | ||
608 | Module for Cyrix/NatSemi Geode 5530 chip. | |
609 | ||
610 | Module snd-cs5535audio | |
611 | ---------------------- | |
612 | ||
613 | Module for multifunction CS5535 companion PCI device | |
614 | ||
615 | The power-management is supported. | |
616 | ||
617 | Module snd-ctxfi | |
618 | ---------------- | |
619 | ||
620 | Module for Creative Sound Blaster X-Fi boards (20k1 / 20k2 chips) | |
621 | ||
622 | * Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series | |
623 | * Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series | |
624 | * Creative Sound Blaster X-Fi Titanium Professional Audio | |
625 | * Creative Sound Blaster X-Fi Titanium | |
626 | * Creative Sound Blaster X-Fi Elite Pro | |
627 | * Creative Sound Blaster X-Fi Platinum | |
628 | * Creative Sound Blaster X-Fi Fatal1ty | |
629 | * Creative Sound Blaster X-Fi XtremeGamer | |
630 | * Creative Sound Blaster X-Fi XtremeMusic | |
631 | ||
632 | reference_rate | |
633 | reference sample rate, 44100 or 48000 (default) | |
634 | multiple | |
635 | multiple to ref. sample rate, 1 or 2 (default) | |
636 | subsystem | |
637 | override the PCI SSID for probing; | |
638 | the value consists of SSVID << 16 | SSDID. | |
639 | The default is zero, which means no override. | |
640 | ||
641 | This module supports multiple cards. | |
642 | ||
643 | Module snd-darla20 | |
644 | ------------------ | |
645 | ||
646 | Module for Echoaudio Darla20 | |
647 | ||
648 | This module supports multiple cards. | |
649 | The driver requires the firmware loader support on kernel. | |
650 | ||
651 | Module snd-darla24 | |
652 | ------------------ | |
653 | ||
654 | Module for Echoaudio Darla24 | |
655 | ||
656 | This module supports multiple cards. | |
657 | The driver requires the firmware loader support on kernel. | |
658 | ||
659 | Module snd-dt019x | |
660 | ----------------- | |
661 | ||
662 | Module for Diamond Technologies DT-019X / Avance Logic ALS-007 (PnP | |
663 | only) | |
664 | ||
665 | This module supports multiple cards. This module is enabled only with | |
666 | ISA PnP support. | |
667 | ||
668 | The power-management is supported. | |
669 | ||
670 | Module snd-dummy | |
671 | ---------------- | |
672 | ||
673 | Module for the dummy sound card. This "card" doesn't do any output | |
674 | or input, but you may use this module for any application which | |
675 | requires a sound card (like RealPlayer). | |
676 | ||
677 | pcm_devs | |
678 | Number of PCM devices assigned to each card (default = 1, up to 4) | |
679 | pcm_substreams | |
680 | Number of PCM substreams assigned to each PCM (default = 8, up to 128) | |
681 | hrtimer | |
682 | Use hrtimer (=1, default) or system timer (=0) | |
683 | fake_buffer | |
684 | Fake buffer allocations (default = 1) | |
685 | ||
686 | When multiple PCM devices are created, snd-dummy gives different | |
687 | behavior to each PCM device: | |
688 | * 0 = interleaved with mmap support | |
689 | * 1 = non-interleaved with mmap support | |
690 | * 2 = interleaved without mmap | |
691 | * 3 = non-interleaved without mmap | |
692 | ||
693 | As default, snd-dummy drivers doesn't allocate the real buffers | |
694 | but either ignores read/write or mmap a single dummy page to all | |
695 | buffer pages, in order to save the resources. If your apps need | |
696 | the read/ written buffer data to be consistent, pass fake_buffer=0 | |
697 | option. | |
698 | ||
699 | The power-management is supported. | |
700 | ||
701 | Module snd-echo3g | |
702 | ----------------- | |
703 | ||
704 | Module for Echoaudio 3G cards (Gina3G/Layla3G) | |
705 | ||
706 | This module supports multiple cards. | |
707 | The driver requires the firmware loader support on kernel. | |
708 | ||
709 | Module snd-emu10k1 | |
710 | ------------------ | |
711 | ||
712 | Module for EMU10K1/EMU10k2 based PCI sound cards. | |
713 | ||
714 | * Sound Blaster Live! | |
715 | * Sound Blaster PCI 512 | |
716 | * Emu APS (partially supported) | |
717 | * Sound Blaster Audigy | |
718 | ||
719 | extin | |
720 | bitmap of available external inputs for FX8010 (see bellow) | |
721 | extout | |
722 | bitmap of available external outputs for FX8010 (see bellow) | |
723 | seq_ports | |
724 | allocated sequencer ports (4 by default) | |
725 | max_synth_voices | |
726 | limit of voices used for wavetable (64 by default) | |
727 | max_buffer_size | |
728 | specifies the maximum size of wavetable/pcm buffers given in MB | |
729 | unit. Default value is 128. | |
730 | enable_ir | |
731 | enable IR | |
732 | ||
733 | This module supports multiple cards and autoprobe. | |
734 | ||
735 | Input & Output configurations [extin/extout] | |
736 | * Creative Card wo/Digital out [0x0003/0x1f03] | |
737 | * Creative Card w/Digital out [0x0003/0x1f0f] | |
738 | * Creative Card w/Digital CD in [0x000f/0x1f0f] | |
739 | * Creative Card wo/Digital out + LiveDrive [0x3fc3/0x1fc3] | |
740 | * Creative Card w/Digital out + LiveDrive [0x3fc3/0x1fcf] | |
741 | * Creative Card w/Digital CD in + LiveDrive [0x3fcf/0x1fcf] | |
742 | * Creative Card wo/Digital out + Digital I/O 2 [0x0fc3/0x1f0f] | |
743 | * Creative Card w/Digital out + Digital I/O 2 [0x0fc3/0x1f0f] | |
744 | * Creative Card w/Digital CD in + Digital I/O 2 [0x0fcf/0x1f0f] | |
745 | * Creative Card 5.1/w Digital out + LiveDrive [0x3fc3/0x1fff] | |
746 | * Creative Card 5.1 (c) 2003 [0x3fc3/0x7cff] | |
747 | * Creative Card all ins and outs [0x3fff/0x7fff] | |
748 | ||
749 | The power-management is supported. | |
750 | ||
751 | Module snd-emu10k1x | |
752 | ------------------- | |
753 | ||
754 | Module for Creative Emu10k1X (SB Live Dell OEM version) | |
755 | ||
756 | This module supports multiple cards. | |
757 | ||
758 | Module snd-ens1370 | |
759 | ------------------ | |
760 | ||
761 | Module for Ensoniq AudioPCI ES1370 PCI sound cards. | |
762 | ||
763 | * SoundBlaster PCI 64 | |
764 | * SoundBlaster PCI 128 | |
765 | ||
766 | joystick | |
767 | Enable joystick (default off) | |
768 | ||
769 | This module supports multiple cards and autoprobe. | |
770 | ||
771 | The power-management is supported. | |
772 | ||
773 | Module snd-ens1371 | |
774 | ------------------ | |
775 | ||
776 | Module for Ensoniq AudioPCI ES1371 PCI sound cards. | |
777 | ||
778 | * SoundBlaster PCI 64 | |
779 | * SoundBlaster PCI 128 | |
780 | * SoundBlaster Vibra PCI | |
781 | ||
782 | joystick_port | |
783 | port # for joystick (0x200,0x208,0x210,0x218), 0 = disable | |
784 | (default), 1 = auto-detect | |
785 | ||
786 | This module supports multiple cards and autoprobe. | |
787 | ||
788 | The power-management is supported. | |
789 | ||
790 | Module snd-es1688 | |
791 | ----------------- | |
792 | ||
793 | Module for ESS AudioDrive ES-1688 and ES-688 sound cards. | |
794 | ||
795 | isapnp | |
796 | ISA PnP detection - 0 = disable, 1 = enable (default) | |
797 | mpu_port | |
798 | port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default) | |
799 | mpu_irq | |
800 | IRQ # for MPU-401 port (5,7,9,10) | |
801 | fm_port | |
802 | port # for OPL3 (option; share the same port as default) | |
803 | ||
804 | with ``isapnp=0``, the following additional options are available: | |
805 | ||
806 | port | |
807 | port # for ES-1688 chip (0x220,0x240,0x260) | |
808 | irq | |
809 | IRQ # for ES-1688 chip (5,7,9,10) | |
810 | dma8 | |
811 | DMA # for ES-1688 chip (0,1,3) | |
812 | ||
813 | This module supports multiple cards and autoprobe (without MPU-401 port) | |
814 | and PnP with the ES968 chip. | |
815 | ||
816 | Module snd-es18xx | |
817 | ----------------- | |
818 | ||
819 | Module for ESS AudioDrive ES-18xx sound cards. | |
820 | ||
821 | isapnp | |
822 | ISA PnP detection - 0 = disable, 1 = enable (default) | |
823 | ||
824 | with ``isapnp=0``, the following options are available: | |
825 | ||
826 | port | |
827 | port # for ES-18xx chip (0x220,0x240,0x260) | |
828 | mpu_port | |
829 | port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default) | |
830 | fm_port | |
831 | port # for FM (optional, not used) | |
832 | irq | |
833 | IRQ # for ES-18xx chip (5,7,9,10) | |
834 | dma1 | |
835 | first DMA # for ES-18xx chip (0,1,3) | |
836 | dma2 | |
837 | first DMA # for ES-18xx chip (0,1,3) | |
838 | ||
839 | This module supports multiple cards, ISA PnP and autoprobe (without MPU-401 | |
840 | port if native ISA PnP routines are not used). | |
841 | When ``dma2`` is equal with ``dma1``, the driver works as half-duplex. | |
842 | ||
843 | The power-management is supported. | |
844 | ||
845 | Module snd-es1938 | |
846 | ----------------- | |
847 | ||
848 | Module for sound cards based on ESS Solo-1 (ES1938,ES1946) chips. | |
849 | ||
850 | This module supports multiple cards and autoprobe. | |
851 | ||
852 | The power-management is supported. | |
853 | ||
854 | Module snd-es1968 | |
855 | ----------------- | |
856 | ||
857 | Module for sound cards based on ESS Maestro-1/2/2E (ES1968/ES1978) chips. | |
858 | ||
859 | total_bufsize | |
860 | total buffer size in kB (1-4096kB) | |
861 | pcm_substreams_p | |
862 | playback channels (1-8, default=2) | |
863 | pcm_substreams_c | |
864 | capture channels (1-8, default=0) | |
865 | clock | |
866 | clock (0 = auto-detection) | |
867 | use_pm | |
868 | support the power-management (0 = off, 1 = on, 2 = auto (default)) | |
869 | enable_mpu | |
870 | enable MPU401 (0 = off, 1 = on, 2 = auto (default)) | |
871 | joystick | |
872 | enable joystick (default off) | |
873 | ||
874 | This module supports multiple cards and autoprobe. | |
875 | ||
876 | The power-management is supported. | |
877 | ||
878 | Module snd-fm801 | |
879 | ---------------- | |
880 | ||
881 | Module for ForteMedia FM801 based PCI sound cards. | |
882 | ||
883 | tea575x_tuner | |
884 | Enable TEA575x tuner; | |
885 | 1 = MediaForte 256-PCS, | |
886 | 2 = MediaForte 256-PCPR, | |
887 | 3 = MediaForte 64-PCR | |
888 | High 16-bits are video (radio) device number + 1; | |
889 | example: 0x10002 (MediaForte 256-PCPR, device 1) | |
890 | ||
891 | This module supports multiple cards and autoprobe. | |
892 | ||
893 | The power-management is supported. | |
894 | ||
895 | Module snd-gina20 | |
896 | ----------------- | |
897 | ||
898 | Module for Echoaudio Gina20 | |
899 | ||
900 | This module supports multiple cards. | |
901 | The driver requires the firmware loader support on kernel. | |
902 | ||
903 | Module snd-gina24 | |
904 | ----------------- | |
905 | ||
906 | Module for Echoaudio Gina24 | |
907 | ||
908 | This module supports multiple cards. | |
909 | The driver requires the firmware loader support on kernel. | |
910 | ||
911 | Module snd-gusclassic | |
912 | --------------------- | |
913 | ||
914 | Module for Gravis UltraSound Classic sound card. | |
915 | ||
916 | port | |
917 | port # for GF1 chip (0x220,0x230,0x240,0x250,0x260) | |
918 | irq | |
919 | IRQ # for GF1 chip (3,5,9,11,12,15) | |
920 | dma1 | |
921 | DMA # for GF1 chip (1,3,5,6,7) | |
922 | dma2 | |
923 | DMA # for GF1 chip (1,3,5,6,7,-1=disable) | |
924 | joystick_dac | |
925 | 0 to 31, (0.59V-4.52V or 0.389V-2.98V) | |
926 | voices | |
927 | GF1 voices limit (14-32) | |
928 | pcm_voices | |
929 | reserved PCM voices | |
930 | ||
931 | This module supports multiple cards and autoprobe. | |
932 | ||
933 | Module snd-gusextreme | |
934 | --------------------- | |
935 | ||
936 | Module for Gravis UltraSound Extreme (Synergy ViperMax) sound card. | |
937 | ||
938 | port | |
939 | port # for ES-1688 chip (0x220,0x230,0x240,0x250,0x260) | |
940 | gf1_port | |
941 | port # for GF1 chip (0x210,0x220,0x230,0x240,0x250,0x260,0x270) | |
942 | mpu_port | |
943 | port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable | |
944 | irq | |
945 | IRQ # for ES-1688 chip (5,7,9,10) | |
946 | gf1_irq | |
947 | IRQ # for GF1 chip (3,5,9,11,12,15) | |
948 | mpu_irq | |
949 | IRQ # for MPU-401 port (5,7,9,10) | |
950 | dma8 | |
951 | DMA # for ES-1688 chip (0,1,3) | |
952 | dma1 | |
953 | DMA # for GF1 chip (1,3,5,6,7) | |
954 | joystick_dac | |
955 | 0 to 31, (0.59V-4.52V or 0.389V-2.98V) | |
956 | voices | |
957 | GF1 voices limit (14-32) | |
958 | pcm_voices | |
959 | reserved PCM voices | |
960 | ||
961 | This module supports multiple cards and autoprobe (without MPU-401 port). | |
962 | ||
963 | Module snd-gusmax | |
964 | ----------------- | |
965 | ||
966 | Module for Gravis UltraSound MAX sound card. | |
967 | ||
968 | port | |
969 | port # for GF1 chip (0x220,0x230,0x240,0x250,0x260) | |
970 | irq | |
971 | IRQ # for GF1 chip (3,5,9,11,12,15) | |
972 | dma1 | |
973 | DMA # for GF1 chip (1,3,5,6,7) | |
974 | dma2 | |
975 | DMA # for GF1 chip (1,3,5,6,7,-1=disable) | |
976 | joystick_dac | |
977 | 0 to 31, (0.59V-4.52V or 0.389V-2.98V) | |
978 | voices | |
979 | GF1 voices limit (14-32) | |
980 | pcm_voices | |
981 | reserved PCM voices | |
982 | ||
983 | This module supports multiple cards and autoprobe. | |
984 | ||
985 | Module snd-hda-intel | |
986 | -------------------- | |
987 | ||
988 | Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8, ICH9, ICH10, | |
989 | PCH, SCH), ATI SB450, SB600, R600, RS600, RS690, RS780, RV610, RV620, | |
990 | RV630, RV635, RV670, RV770, VIA VT8251/VT8237A, SIS966, ULI M5461 | |
991 | ||
992 | [Multiple options for each card instance] | |
993 | ||
994 | model | |
995 | force the model name | |
996 | position_fix | |
997 | Fix DMA pointer; | |
998 | -1 = system default: choose appropriate one per controller hardware, | |
999 | 0 = auto: falls back to LPIB when POSBUF doesn't work, | |
1000 | 1 = use LPIB, | |
1001 | 2 = POSBUF: use position buffer, | |
1002 | 3 = VIACOMBO: VIA-specific workaround for capture, | |
1003 | 4 = COMBO: use LPIB for playback, auto for capture stream | |
1004 | probe_mask | |
1005 | Bitmask to probe codecs (default = -1, meaning all slots); | |
1006 | When the bit 8 (0x100) is set, the lower 8 bits are used | |
1007 | as the "fixed" codec slots; i.e. the driver probes the | |
1008 | slots regardless what hardware reports back | |
1009 | probe_only | |
1010 | Only probing and no codec initialization (default=off); | |
1011 | Useful to check the initial codec status for debugging | |
1012 | bdl_pos_adj | |
1013 | Specifies the DMA IRQ timing delay in samples. | |
1014 | Passing -1 will make the driver to choose the appropriate | |
1015 | value based on the controller chip. | |
1016 | patch | |
1017 | Specifies the early "patch" files to modify the HD-audio setup | |
1018 | before initializing the codecs. | |
1019 | This option is available only when ``CONFIG_SND_HDA_PATCH_LOADER=y`` | |
1020 | is set. See hd-audio/notes.rst for details. | |
1021 | beep_mode | |
1022 | Selects the beep registration mode (0=off, 1=on); | |
1023 | default value is set via ``CONFIG_SND_HDA_INPUT_BEEP_MODE`` kconfig. | |
1024 | ||
1025 | [Single (global) options] | |
1026 | ||
1027 | single_cmd | |
1028 | Use single immediate commands to communicate with codecs | |
1029 | (for debugging only) | |
1030 | enable_msi | |
1031 | Enable Message Signaled Interrupt (MSI) (default = off) | |
1032 | power_save | |
1033 | Automatic power-saving timeout (in second, 0 = disable) | |
1034 | power_save_controller | |
1035 | Reset HD-audio controller in power-saving mode (default = on) | |
1036 | align_buffer_size | |
1037 | Force rounding of buffer/period sizes to multiples of 128 bytes. | |
1038 | This is more efficient in terms of memory access but isn't | |
1039 | required by the HDA spec and prevents users from specifying | |
1040 | exact period/buffer sizes. (default = on) | |
1041 | snoop | |
1042 | Enable/disable snooping (default = on) | |
1043 | ||
1044 | This module supports multiple cards and autoprobe. | |
1045 | ||
1046 | See hd-audio/notes.rst for more details about HD-audio driver. | |
1047 | ||
1048 | Each codec may have a model table for different configurations. | |
1049 | If your machine isn't listed there, the default (usually minimal) | |
1050 | configuration is set up. You can pass ``model=<name>`` option to | |
1051 | specify a certain model in such a case. There are different | |
1052 | models depending on the codec chip. The list of available models | |
1053 | is found in hd-audio/models.rst. | |
1054 | ||
1055 | The model name ``generic`` is treated as a special case. When this | |
1056 | model is given, the driver uses the generic codec parser without | |
1057 | "codec-patch". It's sometimes good for testing and debugging. | |
1058 | ||
1059 | If the default configuration doesn't work and one of the above | |
1060 | matches with your device, report it together with alsa-info.sh | |
1061 | output (with ``--no-upload`` option) to kernel bugzilla or alsa-devel | |
1062 | ML (see the section `Links and Addresses`_). | |
1063 | ||
1064 | ``power_save`` and ``power_save_controller`` options are for power-saving | |
9225e4e0 | 1065 | mode. See powersave.rst for details. |
f6d23df5 TI |
1066 | |
1067 | Note 2: If you get click noises on output, try the module option | |
1068 | ``position_fix=1`` or ``2``. ``position_fix=1`` will use the SD_LPIB | |
1069 | register value without FIFO size correction as the current | |
1070 | DMA pointer. ``position_fix=2`` will make the driver to use | |
1071 | the position buffer instead of reading SD_LPIB register. | |
1072 | (Usually SD_LPIB register is more accurate than the | |
1073 | position buffer.) | |
1074 | ||
1075 | ``position_fix=3`` is specific to VIA devices. The position | |
1076 | of the capture stream is checked from both LPIB and POSBUF | |
1077 | values. ``position_fix=4`` is a combination mode, using LPIB | |
1078 | for playback and POSBUF for capture. | |
1079 | ||
1080 | NB: If you get many ``azx_get_response timeout`` messages at | |
1081 | loading, it's likely a problem of interrupts (e.g. ACPI irq | |
1082 | routing). Try to boot with options like ``pci=noacpi``. Also, you | |
1083 | can try ``single_cmd=1`` module option. This will switch the | |
1084 | communication method between HDA controller and codecs to the | |
1085 | single immediate commands instead of CORB/RIRB. Basically, the | |
1086 | single command mode is provided only for BIOS, and you won't get | |
1087 | unsolicited events, too. But, at least, this works independently | |
1088 | from the irq. Remember this is a last resort, and should be | |
1089 | avoided as much as possible... | |
1090 | ||
1091 | MORE NOTES ON ``azx_get_response timeout`` PROBLEMS: | |
1092 | On some hardware, you may need to add a proper probe_mask option | |
1093 | to avoid the ``azx_get_response timeout`` problem above, instead. | |
1094 | This occurs when the access to non-existing or non-working codec slot | |
1095 | (likely a modem one) causes a stall of the communication via HD-audio | |
1096 | bus. You can see which codec slots are probed by enabling | |
1097 | ``CONFIG_SND_DEBUG_VERBOSE``, or simply from the file name of the codec | |
1098 | proc files. Then limit the slots to probe by probe_mask option. | |
1099 | For example, ``probe_mask=1`` means to probe only the first slot, and | |
1100 | ``probe_mask=4`` means only the third slot. | |
1101 | ||
1102 | The power-management is supported. | |
1103 | ||
1104 | Module snd-hdsp | |
1105 | --------------- | |
1106 | ||
1107 | Module for RME Hammerfall DSP audio interface(s) | |
1108 | ||
1109 | This module supports multiple cards. | |
1110 | ||
1111 | Note: The firmware data can be automatically loaded via hotplug | |
1112 | when ``CONFIG_FW_LOADER`` is set. Otherwise, you need to load | |
1113 | the firmware via hdsploader utility included in alsa-tools | |
1114 | package. | |
1115 | The firmware data is found in alsa-firmware package. | |
1116 | ||
1117 | Note: snd-page-alloc module does the job which snd-hammerfall-mem | |
1118 | module did formerly. It will allocate the buffers in advance | |
1119 | when any HDSP cards are found. To make the buffer | |
1120 | allocation sure, load snd-page-alloc module in the early | |
1121 | stage of boot sequence. See `Early Buffer Allocation`_ | |
1122 | section. | |
1123 | ||
1124 | Module snd-hdspm | |
1125 | ---------------- | |
1126 | ||
1127 | Module for RME HDSP MADI board. | |
1128 | ||
1129 | precise_ptr | |
1130 | Enable precise pointer, or disable. | |
1131 | line_outs_monitor | |
1132 | Send playback streams to analog outs by default. | |
1133 | enable_monitor | |
1134 | Enable Analog Out on Channel 63/64 by default. | |
1135 | ||
9225e4e0 | 1136 | See hdspm.rst for details. |
f6d23df5 TI |
1137 | |
1138 | Module snd-ice1712 | |
1139 | ------------------ | |
1140 | ||
1141 | Module for Envy24 (ICE1712) based PCI sound cards. | |
1142 | ||
1143 | * MidiMan M Audio Delta 1010 | |
1144 | * MidiMan M Audio Delta 1010LT | |
1145 | * MidiMan M Audio Delta DiO 2496 | |
1146 | * MidiMan M Audio Delta 66 | |
1147 | * MidiMan M Audio Delta 44 | |
1148 | * MidiMan M Audio Delta 410 | |
1149 | * MidiMan M Audio Audiophile 2496 | |
1150 | * TerraTec EWS 88MT | |
1151 | * TerraTec EWS 88D | |
1152 | * TerraTec EWX 24/96 | |
1153 | * TerraTec DMX 6Fire | |
1154 | * TerraTec Phase 88 | |
1155 | * Hoontech SoundTrack DSP 24 | |
1156 | * Hoontech SoundTrack DSP 24 Value | |
1157 | * Hoontech SoundTrack DSP 24 Media 7.1 | |
1158 | * Event Electronics, EZ8 | |
1159 | * Digigram VX442 | |
1160 | * Lionstracs, Mediastaton | |
1161 | * Terrasoniq TS 88 | |
1162 | ||
1163 | model | |
1164 | Use the given board model, one of the following: | |
1165 | delta1010, dio2496, delta66, delta44, audiophile, delta410, | |
1166 | delta1010lt, vx442, ewx2496, ews88mt, ews88mt_new, ews88d, | |
1167 | dmx6fire, dsp24, dsp24_value, dsp24_71, ez8, | |
1168 | phase88, mediastation | |
1169 | omni | |
1170 | Omni I/O support for MidiMan M-Audio Delta44/66 | |
1171 | cs8427_timeout | |
1172 | reset timeout for the CS8427 chip (S/PDIF transceiver) in msec | |
1173 | resolution, default value is 500 (0.5 sec) | |
1174 | ||
1175 | This module supports multiple cards and autoprobe. | |
1176 | Note: The consumer part is not used with all Envy24 based cards (for | |
1177 | example in the MidiMan Delta siree). | |
1178 | ||
1179 | Note: The supported board is detected by reading EEPROM or PCI | |
1180 | SSID (if EEPROM isn't available). You can override the | |
1181 | model by passing ``model`` module option in case that the | |
1182 | driver isn't configured properly or you want to try another | |
1183 | type for testing. | |
1184 | ||
1185 | Module snd-ice1724 | |
1186 | ------------------ | |
1187 | ||
1188 | Module for Envy24HT (VT/ICE1724), Envy24PT (VT1720) based PCI sound cards. | |
1189 | ||
1190 | * MidiMan M Audio Revolution 5.1 | |
1191 | * MidiMan M Audio Revolution 7.1 | |
1192 | * MidiMan M Audio Audiophile 192 | |
1193 | * AMP Ltd AUDIO2000 | |
1194 | * TerraTec Aureon 5.1 Sky | |
1195 | * TerraTec Aureon 7.1 Space | |
1196 | * TerraTec Aureon 7.1 Universe | |
1197 | * TerraTec Phase 22 | |
1198 | * TerraTec Phase 28 | |
1199 | * AudioTrak Prodigy 7.1 | |
1200 | * AudioTrak Prodigy 7.1 LT | |
1201 | * AudioTrak Prodigy 7.1 XT | |
1202 | * AudioTrak Prodigy 7.1 HIFI | |
1203 | * AudioTrak Prodigy 7.1 HD2 | |
1204 | * AudioTrak Prodigy 192 | |
1205 | * Pontis MS300 | |
1206 | * Albatron K8X800 Pro II | |
1207 | * Chaintech ZNF3-150 | |
1208 | * Chaintech ZNF3-250 | |
1209 | * Chaintech 9CJS | |
1210 | * Chaintech AV-710 | |
1211 | * Shuttle SN25P | |
1212 | * Onkyo SE-90PCI | |
1213 | * Onkyo SE-200PCI | |
1214 | * ESI Juli@ | |
1215 | * ESI Maya44 | |
1216 | * Hercules Fortissimo IV | |
1217 | * EGO-SYS WaveTerminal 192M | |
1218 | ||
1219 | model | |
1220 | Use the given board model, one of the following: | |
1221 | revo51, revo71, amp2000, prodigy71, prodigy71lt, | |
1222 | prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192, | |
1223 | juli, aureon51, aureon71, universe, ap192, k8x800, | |
1224 | phase22, phase28, ms300, av710, se200pci, se90pci, | |
1225 | fortissimo4, sn25p, WT192M, maya44 | |
1226 | ||
1227 | This module supports multiple cards and autoprobe. | |
1228 | ||
1229 | Note: The supported board is detected by reading EEPROM or PCI | |
1230 | SSID (if EEPROM isn't available). You can override the | |
1231 | model by passing ``model`` module option in case that the | |
1232 | driver isn't configured properly or you want to try another | |
1233 | type for testing. | |
1234 | ||
1235 | Module snd-indigo | |
1236 | ----------------- | |
1237 | ||
1238 | Module for Echoaudio Indigo | |
1239 | ||
1240 | This module supports multiple cards. | |
1241 | The driver requires the firmware loader support on kernel. | |
1242 | ||
1243 | Module snd-indigodj | |
1244 | ------------------- | |
1245 | ||
1246 | Module for Echoaudio Indigo DJ | |
1247 | ||
1248 | This module supports multiple cards. | |
1249 | The driver requires the firmware loader support on kernel. | |
1250 | ||
1251 | Module snd-indigoio | |
1252 | ------------------- | |
1253 | ||
1254 | Module for Echoaudio Indigo IO | |
1255 | ||
1256 | This module supports multiple cards. | |
1257 | The driver requires the firmware loader support on kernel. | |
1258 | ||
1259 | Module snd-intel8x0 | |
1260 | ------------------- | |
1261 | ||
1262 | Module for AC'97 motherboards from Intel and compatibles. | |
1263 | ||
1264 | * Intel i810/810E, i815, i820, i830, i84x, MX440 ICH5, ICH6, ICH7, | |
1265 | 6300ESB, ESB2 | |
1266 | * SiS 7012 (SiS 735) | |
1267 | * NVidia NForce, NForce2, NForce3, MCP04, CK804 CK8, CK8S, MCP501 | |
1268 | * AMD AMD768, AMD8111 | |
1269 | * ALi m5455 | |
1270 | ||
1271 | ac97_clock | |
1272 | AC'97 codec clock base (0 = auto-detect) | |
1273 | ac97_quirk | |
1274 | AC'97 workaround for strange hardware; | |
1275 | See `AC97 Quirk Option`_ section below. | |
1276 | buggy_irq | |
1277 | Enable workaround for buggy interrupts on some motherboards | |
1278 | (default yes on nForce chips, otherwise off) | |
1279 | buggy_semaphore | |
1280 | Enable workaround for hardware with buggy semaphores (e.g. on some | |
1281 | ASUS laptops) (default off) | |
1282 | spdif_aclink | |
1283 | Use S/PDIF over AC-link instead of direct connection from the | |
1284 | controller chip (0 = off, 1 = on, -1 = default) | |
1285 | ||
1286 | This module supports one chip and autoprobe. | |
1287 | ||
1288 | Note: the latest driver supports auto-detection of chip clock. | |
1289 | if you still encounter too fast playback, specify the clock | |
1290 | explicitly via the module option ``ac97_clock=41194``. | |
1291 | ||
1292 | Joystick/MIDI ports are not supported by this driver. If your | |
1293 | motherboard has these devices, use the ns558 or snd-mpu401 | |
1294 | modules, respectively. | |
1295 | ||
1296 | The power-management is supported. | |
1297 | ||
1298 | Module snd-intel8x0m | |
1299 | -------------------- | |
1300 | ||
1301 | Module for Intel ICH (i8x0) chipset MC97 modems. | |
1302 | ||
1303 | * Intel i810/810E, i815, i820, i830, i84x, MX440 ICH5, ICH6, ICH7 | |
1304 | * SiS 7013 (SiS 735) | |
1305 | * NVidia NForce, NForce2, NForce2s, NForce3 | |
1306 | * AMD AMD8111 | |
1307 | * ALi m5455 | |
1308 | ||
1309 | ac97_clock | |
1310 | AC'97 codec clock base (0 = auto-detect) | |
1311 | ||
1312 | This module supports one card and autoprobe. | |
1313 | ||
1314 | Note: The default index value of this module is -2, i.e. the first | |
1315 | slot is excluded. | |
1316 | ||
1317 | The power-management is supported. | |
1318 | ||
1319 | Module snd-interwave | |
1320 | -------------------- | |
1321 | ||
1322 | Module for Gravis UltraSound PnP, Dynasonic 3-D/Pro, STB Sound Rage 32 | |
1323 | and other sound cards based on AMD InterWave (tm) chip. | |
1324 | ||
1325 | joystick_dac | |
1326 | 0 to 31, (0.59V-4.52V or 0.389V-2.98V) | |
1327 | midi | |
1328 | 1 = MIDI UART enable, 0 = MIDI UART disable (default) | |
1329 | pcm_voices | |
1330 | reserved PCM voices for the synthesizer (default 2) | |
1331 | effect | |
1332 | 1 = InterWave effects enable (default 0); requires 8 voices | |
1333 | isapnp | |
1334 | ISA PnP detection - 0 = disable, 1 = enable (default) | |
1335 | ||
1336 | with ``isapnp=0``, the following options are available: | |
1337 | ||
1338 | port | |
1339 | port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260) | |
1340 | irq | |
1341 | IRQ # for InterWave chip (3,5,9,11,12,15) | |
1342 | dma1 | |
1343 | DMA # for InterWave chip (0,1,3,5,6,7) | |
1344 | dma2 | |
1345 | DMA # for InterWave chip (0,1,3,5,6,7,-1=disable) | |
1346 | ||
1347 | This module supports multiple cards, autoprobe and ISA PnP. | |
1348 | ||
1349 | Module snd-interwave-stb | |
1350 | ------------------------ | |
1351 | ||
1352 | Module for UltraSound 32-Pro (sound card from STB used by Compaq) | |
1353 | and other sound cards based on AMD InterWave (tm) chip with TEA6330T | |
1354 | circuit for extended control of bass, treble and master volume. | |
1355 | ||
1356 | joystick_dac | |
1357 | 0 to 31, (0.59V-4.52V or 0.389V-2.98V) | |
1358 | midi | |
1359 | 1 = MIDI UART enable, 0 = MIDI UART disable (default) | |
1360 | pcm_voices | |
1361 | reserved PCM voices for the synthesizer (default 2) | |
1362 | effect | |
1363 | 1 = InterWave effects enable (default 0); requires 8 voices | |
1364 | isapnp | |
1365 | ISA PnP detection - 0 = disable, 1 = enable (default) | |
1366 | ||
1367 | with ``isapnp=0``, the following options are available: | |
1368 | ||
1369 | port | |
1370 | port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260) | |
1371 | port_tc | |
1372 | tone control (i2c bus) port # for TEA6330T chip (0x350,0x360,0x370,0x380) | |
1373 | irq | |
1374 | IRQ # for InterWave chip (3,5,9,11,12,15) | |
1375 | dma1 | |
1376 | DMA # for InterWave chip (0,1,3,5,6,7) | |
1377 | dma2 | |
1378 | DMA # for InterWave chip (0,1,3,5,6,7,-1=disable) | |
1379 | ||
1380 | This module supports multiple cards, autoprobe and ISA PnP. | |
1381 | ||
1382 | Module snd-jazz16 | |
1383 | ------------------- | |
1384 | ||
1385 | Module for Media Vision Jazz16 chipset. The chipset consists of 3 chips: | |
1386 | MVD1216 + MVA416 + MVA514. | |
1387 | ||
1388 | port | |
1389 | port # for SB DSP chip (0x210,0x220,0x230,0x240,0x250,0x260) | |
1390 | irq | |
1391 | IRQ # for SB DSP chip (3,5,7,9,10,15) | |
1392 | dma8 | |
1393 | DMA # for SB DSP chip (1,3) | |
1394 | dma16 | |
1395 | DMA # for SB DSP chip (5,7) | |
1396 | mpu_port | |
1397 | MPU-401 port # (0x300,0x310,0x320,0x330) | |
1398 | mpu_irq | |
1399 | MPU-401 irq # (2,3,5,7) | |
1400 | ||
1401 | This module supports multiple cards. | |
1402 | ||
1403 | Module snd-korg1212 | |
1404 | ------------------- | |
1405 | ||
1406 | Module for Korg 1212 IO PCI card | |
1407 | ||
1408 | This module supports multiple cards. | |
1409 | ||
1410 | Module snd-layla20 | |
1411 | ------------------ | |
1412 | ||
1413 | Module for Echoaudio Layla20 | |
1414 | ||
1415 | This module supports multiple cards. | |
1416 | The driver requires the firmware loader support on kernel. | |
1417 | ||
1418 | Module snd-layla24 | |
1419 | ------------------ | |
1420 | ||
1421 | Module for Echoaudio Layla24 | |
1422 | ||
1423 | This module supports multiple cards. | |
1424 | The driver requires the firmware loader support on kernel. | |
1425 | ||
1426 | Module snd-lola | |
1427 | --------------- | |
1428 | ||
1429 | Module for Digigram Lola PCI-e boards | |
1430 | ||
1431 | This module supports multiple cards. | |
1432 | ||
1433 | Module snd-lx6464es | |
1434 | ------------------- | |
1435 | ||
1436 | Module for Digigram LX6464ES boards | |
1437 | ||
1438 | This module supports multiple cards. | |
1439 | ||
1440 | Module snd-maestro3 | |
1441 | ------------------- | |
1442 | ||
1443 | Module for Allegro/Maestro3 chips | |
1444 | ||
1445 | external_amp | |
1446 | enable external amp (enabled by default) | |
1447 | amp_gpio | |
1448 | GPIO pin number for external amp (0-15) or -1 for default pin (8 | |
1449 | for allegro, 1 for others) | |
1450 | ||
1451 | This module supports autoprobe and multiple chips. | |
1452 | ||
1453 | Note: the binding of amplifier is dependent on hardware. | |
1454 | If there is no sound even though all channels are unmuted, try to | |
1455 | specify other gpio connection via amp_gpio option. | |
1456 | For example, a Panasonic notebook might need ``amp_gpio=0x0d`` | |
1457 | option. | |
1458 | ||
1459 | The power-management is supported. | |
1460 | ||
1461 | Module snd-mia | |
1462 | --------------- | |
1463 | ||
1464 | Module for Echoaudio Mia | |
1465 | ||
1466 | This module supports multiple cards. | |
1467 | The driver requires the firmware loader support on kernel. | |
1468 | ||
1469 | Module snd-miro | |
1470 | --------------- | |
1471 | ||
1472 | Module for Miro soundcards: miroSOUND PCM 1 pro, miroSOUND PCM 12, | |
1473 | miroSOUND PCM 20 Radio. | |
1474 | ||
1475 | port | |
1476 | Port # (0x530,0x604,0xe80,0xf40) | |
1477 | irq | |
1478 | IRQ # (5,7,9,10,11) | |
1479 | dma1 | |
1480 | 1st dma # (0,1,3) | |
1481 | dma2 | |
1482 | 2nd dma # (0,1) | |
1483 | mpu_port | |
1484 | MPU-401 port # (0x300,0x310,0x320,0x330) | |
1485 | mpu_irq | |
1486 | MPU-401 irq # (5,7,9,10) | |
1487 | fm_port | |
1488 | FM Port # (0x388) | |
1489 | wss | |
1490 | enable WSS mode | |
1491 | ide | |
1492 | enable onboard ide support | |
1493 | ||
1494 | Module snd-mixart | |
1495 | ----------------- | |
1496 | ||
1497 | Module for Digigram miXart8 sound cards. | |
1498 | ||
1499 | This module supports multiple cards. | |
1500 | Note: One miXart8 board will be represented as 4 alsa cards. | |
1501 | See MIXART.txt for details. | |
1502 | ||
1503 | When the driver is compiled as a module and the hotplug firmware | |
1504 | is supported, the firmware data is loaded via hotplug automatically. | |
1505 | Install the necessary firmware files in alsa-firmware package. | |
1506 | When no hotplug fw loader is available, you need to load the | |
1507 | firmware via mixartloader utility in alsa-tools package. | |
1508 | ||
1509 | Module snd-mona | |
1510 | --------------- | |
1511 | ||
1512 | Module for Echoaudio Mona | |
1513 | ||
1514 | This module supports multiple cards. | |
1515 | The driver requires the firmware loader support on kernel. | |
1516 | ||
1517 | Module snd-mpu401 | |
1518 | ----------------- | |
1519 | ||
1520 | Module for MPU-401 UART devices. | |
1521 | ||
1522 | port | |
1523 | port number or -1 (disable) | |
1524 | irq | |
1525 | IRQ number or -1 (disable) | |
1526 | pnp | |
1527 | PnP detection - 0 = disable, 1 = enable (default) | |
1528 | ||
1529 | This module supports multiple devices and PnP. | |
1530 | ||
1531 | Module snd-msnd-classic | |
1532 | ----------------------- | |
1533 | ||
1534 | Module for Turtle Beach MultiSound Classic, Tahiti or Monterey | |
1535 | soundcards. | |
1536 | ||
1537 | io | |
1538 | Port # for msnd-classic card | |
1539 | irq | |
1540 | IRQ # for msnd-classic card | |
1541 | mem | |
1542 | Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or 0xe8000) | |
1543 | write_ndelay | |
1544 | enable write ndelay (default = 1) | |
1545 | calibrate_signal | |
1546 | calibrate signal (default = 0) | |
1547 | isapnp | |
1548 | ISA PnP detection - 0 = disable, 1 = enable (default) | |
1549 | digital | |
1550 | Digital daughterboard present (default = 0) | |
1551 | cfg | |
1552 | Config port (0x250, 0x260 or 0x270) default = PnP | |
1553 | reset | |
1554 | Reset all devices | |
1555 | mpu_io | |
1556 | MPU401 I/O port | |
1557 | mpu_irq | |
1558 | MPU401 irq# | |
1559 | ide_io0 | |
1560 | IDE port #0 | |
1561 | ide_io1 | |
1562 | IDE port #1 | |
1563 | ide_irq | |
1564 | IDE irq# | |
1565 | joystick_io | |
1566 | Joystick I/O port | |
1567 | ||
1568 | The driver requires firmware files ``turtlebeach/msndinit.bin`` and | |
1569 | ``turtlebeach/msndperm.bin`` in the proper firmware directory. | |
1570 | ||
0e6995e3 | 1571 | See Documentation/sound/cards/multisound.sh for important information |
f6d23df5 TI |
1572 | about this driver. Note that it has been discontinued, but the |
1573 | Voyetra Turtle Beach knowledge base entry for it is still available | |
1574 | at | |
1575 | http://www.turtlebeach.com | |
1576 | ||
1577 | Module snd-msnd-pinnacle | |
1578 | ------------------------ | |
1579 | ||
1580 | Module for Turtle Beach MultiSound Pinnacle/Fiji soundcards. | |
1581 | ||
1582 | io | |
1583 | Port # for pinnacle/fiji card | |
1584 | irq | |
1585 | IRQ # for pinnalce/fiji card | |
1586 | mem | |
1587 | Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or 0xe8000) | |
1588 | write_ndelay | |
1589 | enable write ndelay (default = 1) | |
1590 | calibrate_signal | |
1591 | calibrate signal (default = 0) | |
1592 | isapnp | |
1593 | ISA PnP detection - 0 = disable, 1 = enable (default) | |
1594 | ||
1595 | The driver requires firmware files ``turtlebeach/pndspini.bin`` and | |
1596 | ``turtlebeach/pndsperm.bin`` in the proper firmware directory. | |
1597 | ||
1598 | Module snd-mtpav | |
1599 | ---------------- | |
1600 | ||
1601 | Module for MOTU MidiTimePiece AV multiport MIDI (on the parallel | |
1602 | port). | |
1603 | ||
1604 | port | |
1605 | I/O port # for MTPAV (0x378,0x278, default=0x378) | |
1606 | irq | |
1607 | IRQ # for MTPAV (7,5, default=7) | |
1608 | hwports | |
1609 | number of supported hardware ports, default=8. | |
1610 | ||
1611 | Module supports only 1 card. This module has no enable option. | |
1612 | ||
1613 | Module snd-mts64 | |
1614 | ---------------- | |
1615 | ||
1616 | Module for Ego Systems (ESI) Miditerminal 4140 | |
1617 | ||
1618 | This module supports multiple devices. | |
1619 | Requires parport (``CONFIG_PARPORT``). | |
1620 | ||
1621 | Module snd-nm256 | |
1622 | ---------------- | |
1623 | ||
1624 | Module for NeoMagic NM256AV/ZX chips | |
1625 | ||
1626 | playback_bufsize | |
1627 | max playback frame size in kB (4-128kB) | |
1628 | capture_bufsize | |
1629 | max capture frame size in kB (4-128kB) | |
1630 | force_ac97 | |
1631 | 0 or 1 (disabled by default) | |
1632 | buffer_top | |
1633 | specify buffer top address | |
1634 | use_cache | |
1635 | 0 or 1 (disabled by default) | |
1636 | vaio_hack | |
1637 | alias buffer_top=0x25a800 | |
1638 | reset_workaround | |
1639 | enable AC97 RESET workaround for some laptops | |
1640 | reset_workaround2 | |
1641 | enable extended AC97 RESET workaround for some other laptops | |
1642 | ||
1643 | This module supports one chip and autoprobe. | |
1644 | ||
1645 | The power-management is supported. | |
1646 | ||
1647 | Note: on some notebooks the buffer address cannot be detected | |
1648 | automatically, or causes hang-up during initialization. | |
1649 | In such a case, specify the buffer top address explicitly via | |
1650 | the buffer_top option. | |
1651 | For example, | |
1652 | Sony F250: buffer_top=0x25a800 | |
1653 | Sony F270: buffer_top=0x272800 | |
1654 | The driver supports only ac97 codec. It's possible to force | |
1655 | to initialize/use ac97 although it's not detected. In such a | |
1656 | case, use ``force_ac97=1`` option - but *NO* guarantee whether it | |
1657 | works! | |
1658 | ||
1659 | Note: The NM256 chip can be linked internally with non-AC97 | |
1660 | codecs. This driver supports only the AC97 codec, and won't work | |
1661 | with machines with other (most likely CS423x or OPL3SAx) chips, | |
1662 | even though the device is detected in lspci. In such a case, try | |
1663 | other drivers, e.g. snd-cs4232 or snd-opl3sa2. Some has ISA-PnP | |
1664 | but some doesn't have ISA PnP. You'll need to specify ``isapnp=0`` | |
1665 | and proper hardware parameters in the case without ISA PnP. | |
1666 | ||
1667 | Note: some laptops need a workaround for AC97 RESET. For the | |
1668 | known hardware like Dell Latitude LS and Sony PCG-F305, this | |
1669 | workaround is enabled automatically. For other laptops with a | |
1670 | hard freeze, you can try ``reset_workaround=1`` option. | |
1671 | ||
1672 | Note: Dell Latitude CSx laptops have another problem regarding | |
1673 | AC97 RESET. On these laptops, reset_workaround2 option is | |
1674 | turned on as default. This option is worth to try if the | |
1675 | previous reset_workaround option doesn't help. | |
1676 | ||
1677 | Note: This driver is really crappy. It's a porting from the | |
1678 | OSS driver, which is a result of black-magic reverse engineering. | |
1679 | The detection of codec will fail if the driver is loaded *after* | |
1680 | X-server as described above. You might be able to force to load | |
1681 | the module, but it may result in hang-up. Hence, make sure that | |
1682 | you load this module *before* X if you encounter this kind of | |
1683 | problem. | |
1684 | ||
1685 | Module snd-opl3sa2 | |
1686 | ------------------ | |
1687 | ||
1688 | Module for Yamaha OPL3-SA2/SA3 sound cards. | |
1689 | ||
1690 | isapnp | |
1691 | ISA PnP detection - 0 = disable, 1 = enable (default) | |
1692 | ||
1693 | with ``isapnp=0``, the following options are available: | |
1694 | ||
1695 | port | |
1696 | control port # for OPL3-SA chip (0x370) | |
1697 | sb_port | |
1698 | SB port # for OPL3-SA chip (0x220,0x240) | |
1699 | wss_port | |
1700 | WSS port # for OPL3-SA chip (0x530,0xe80,0xf40,0x604) | |
1701 | midi_port | |
1702 | port # for MPU-401 UART (0x300,0x330), -1 = disable | |
1703 | fm_port | |
1704 | FM port # for OPL3-SA chip (0x388), -1 = disable | |
1705 | irq | |
1706 | IRQ # for OPL3-SA chip (5,7,9,10) | |
1707 | dma1 | |
1708 | first DMA # for Yamaha OPL3-SA chip (0,1,3) | |
1709 | dma2 | |
1710 | second DMA # for Yamaha OPL3-SA chip (0,1,3), -1 = disable | |
1711 | ||
1712 | This module supports multiple cards and ISA PnP. It does not support | |
1713 | autoprobe (if ISA PnP is not used) thus all ports must be specified!!! | |
1714 | ||
1715 | The power-management is supported. | |
1716 | ||
1717 | Module snd-opti92x-ad1848 | |
1718 | ------------------------- | |
1719 | ||
1720 | Module for sound cards based on OPTi 82c92x and Analog Devices AD1848 chips. | |
1721 | Module works with OAK Mozart cards as well. | |
1722 | ||
1723 | isapnp | |
1724 | ISA PnP detection - 0 = disable, 1 = enable (default) | |
1725 | ||
1726 | with ``isapnp=0``, the following options are available: | |
1727 | ||
1728 | port | |
1729 | port # for WSS chip (0x530,0xe80,0xf40,0x604) | |
1730 | mpu_port | |
1731 | port # for MPU-401 UART (0x300,0x310,0x320,0x330) | |
1732 | fm_port | |
1733 | port # for OPL3 device (0x388) | |
1734 | irq | |
1735 | IRQ # for WSS chip (5,7,9,10,11) | |
1736 | mpu_irq | |
1737 | IRQ # for MPU-401 UART (5,7,9,10) | |
1738 | dma1 | |
1739 | first DMA # for WSS chip (0,1,3) | |
1740 | ||
1741 | This module supports only one card, autoprobe and PnP. | |
1742 | ||
1743 | Module snd-opti92x-cs4231 | |
1744 | ------------------------- | |
1745 | ||
1746 | Module for sound cards based on OPTi 82c92x and Crystal CS4231 chips. | |
1747 | ||
1748 | isapnp | |
1749 | ISA PnP detection - 0 = disable, 1 = enable (default) | |
1750 | ||
1751 | with ``isapnp=0``, the following options are available: | |
1752 | ||
1753 | port | |
1754 | port # for WSS chip (0x530,0xe80,0xf40,0x604) | |
1755 | mpu_port | |
1756 | port # for MPU-401 UART (0x300,0x310,0x320,0x330) | |
1757 | fm_port | |
1758 | port # for OPL3 device (0x388) | |
1759 | irq | |
1760 | IRQ # for WSS chip (5,7,9,10,11) | |
1761 | mpu_irq | |
1762 | IRQ # for MPU-401 UART (5,7,9,10) | |
1763 | dma1 | |
1764 | first DMA # for WSS chip (0,1,3) | |
1765 | dma2 | |
1766 | second DMA # for WSS chip (0,1,3) | |
1767 | ||
1768 | This module supports only one card, autoprobe and PnP. | |
1769 | ||
1770 | Module snd-opti93x | |
1771 | ------------------ | |
1772 | ||
1773 | Module for sound cards based on OPTi 82c93x chips. | |
1774 | ||
1775 | isapnp | |
1776 | ISA PnP detection - 0 = disable, 1 = enable (default) | |
1777 | ||
1778 | with ``isapnp=0``, the following options are available: | |
1779 | ||
1780 | port | |
1781 | port # for WSS chip (0x530,0xe80,0xf40,0x604) | |
1782 | mpu_port | |
1783 | port # for MPU-401 UART (0x300,0x310,0x320,0x330) | |
1784 | fm_port | |
1785 | port # for OPL3 device (0x388) | |
1786 | irq | |
1787 | IRQ # for WSS chip (5,7,9,10,11) | |
1788 | mpu_irq | |
1789 | IRQ # for MPU-401 UART (5,7,9,10) | |
1790 | dma1 | |
1791 | first DMA # for WSS chip (0,1,3) | |
1792 | dma2 | |
1793 | second DMA # for WSS chip (0,1,3) | |
1794 | ||
1795 | This module supports only one card, autoprobe and PnP. | |
1796 | ||
1797 | Module snd-oxygen | |
1798 | ----------------- | |
1799 | ||
1800 | Module for sound cards based on the C-Media CMI8786/8787/8788 chip: | |
1801 | ||
1802 | * Asound A-8788 | |
1803 | * Asus Xonar DG/DGX | |
1804 | * AuzenTech X-Meridian | |
1805 | * AuzenTech X-Meridian 2G | |
1806 | * Bgears b-Enspirer | |
1807 | * Club3D Theatron DTS | |
1808 | * HT-Omega Claro (plus) | |
1809 | * HT-Omega Claro halo (XT) | |
1810 | * Kuroutoshikou CMI8787-HG2PCI | |
1811 | * Razer Barracuda AC-1 | |
1812 | * Sondigo Inferno | |
1813 | * TempoTec HiFier Fantasia | |
1814 | * TempoTec HiFier Serenade | |
1815 | ||
1816 | This module supports autoprobe and multiple cards. | |
1817 | ||
1818 | Module snd-pcsp | |
1819 | --------------- | |
1820 | ||
1821 | Module for internal PC-Speaker. | |
1822 | ||
1823 | nopcm | |
1824 | Disable PC-Speaker PCM sound. Only beeps remain. | |
1825 | nforce_wa | |
1826 | enable NForce chipset workaround. Expect bad sound. | |
1827 | ||
1828 | This module supports system beeps, some kind of PCM playback and | |
1829 | even a few mixer controls. | |
1830 | ||
1831 | Module snd-pcxhr | |
1832 | ---------------- | |
1833 | ||
1834 | Module for Digigram PCXHR boards | |
1835 | ||
1836 | This module supports multiple cards. | |
1837 | ||
1838 | Module snd-portman2x4 | |
1839 | --------------------- | |
1840 | ||
1841 | Module for Midiman Portman 2x4 parallel port MIDI interface | |
1842 | ||
1843 | This module supports multiple cards. | |
1844 | ||
1845 | Module snd-powermac (on ppc only) | |
1846 | --------------------------------- | |
1847 | ||
1848 | Module for PowerMac, iMac and iBook on-board soundchips | |
1849 | ||
1850 | enable_beep | |
1851 | enable beep using PCM (enabled as default) | |
1852 | ||
1853 | Module supports autoprobe a chip. | |
1854 | ||
1855 | Note: the driver may have problems regarding endianness. | |
1856 | ||
1857 | The power-management is supported. | |
1858 | ||
1859 | Module snd-pxa2xx-ac97 (on arm only) | |
1860 | ------------------------------------ | |
1861 | ||
1862 | Module for AC97 driver for the Intel PXA2xx chip | |
1863 | ||
1864 | For ARM architecture only. | |
1865 | ||
1866 | The power-management is supported. | |
1867 | ||
1868 | Module snd-riptide | |
1869 | ------------------ | |
1870 | ||
1871 | Module for Conexant Riptide chip | |
1872 | ||
1873 | joystick_port | |
1874 | Joystick port # (default: 0x200) | |
1875 | mpu_port | |
1876 | MPU401 port # (default: 0x330) | |
1877 | opl3_port | |
1878 | OPL3 port # (default: 0x388) | |
1879 | ||
1880 | This module supports multiple cards. | |
1881 | The driver requires the firmware loader support on kernel. | |
1882 | You need to install the firmware file ``riptide.hex`` to the standard | |
1883 | firmware path (e.g. /lib/firmware). | |
1884 | ||
1885 | Module snd-rme32 | |
1886 | ---------------- | |
1887 | ||
1888 | Module for RME Digi32, Digi32 Pro and Digi32/8 (Sek'd Prodif32, | |
1889 | Prodif96 and Prodif Gold) sound cards. | |
1890 | ||
1891 | This module supports multiple cards. | |
1892 | ||
1893 | Module snd-rme96 | |
1894 | ---------------- | |
1895 | ||
1896 | Module for RME Digi96, Digi96/8 and Digi96/8 PRO/PAD/PST sound cards. | |
1897 | ||
1898 | This module supports multiple cards. | |
1899 | ||
1900 | Module snd-rme9652 | |
1901 | ------------------ | |
1902 | ||
1903 | Module for RME Digi9652 (Hammerfall, Hammerfall-Light) sound cards. | |
1904 | ||
1905 | precise_ptr | |
1906 | Enable precise pointer (doesn't work reliably). (default = 0) | |
1907 | ||
1908 | This module supports multiple cards. | |
1909 | ||
1910 | Note: snd-page-alloc module does the job which snd-hammerfall-mem | |
1911 | module did formerly. It will allocate the buffers in advance | |
1912 | when any RME9652 cards are found. To make the buffer | |
1913 | allocation sure, load snd-page-alloc module in the early | |
1914 | stage of boot sequence. See `Early Buffer Allocation`_ | |
1915 | section. | |
1916 | ||
1917 | Module snd-sa11xx-uda1341 (on arm only) | |
1918 | --------------------------------------- | |
1919 | ||
1920 | Module for Philips UDA1341TS on Compaq iPAQ H3600 sound card. | |
1921 | ||
1922 | Module supports only one card. | |
1923 | Module has no enable and index options. | |
1924 | ||
1925 | The power-management is supported. | |
1926 | ||
1927 | Module snd-sb8 | |
1928 | -------------- | |
1929 | ||
1930 | Module for 8-bit SoundBlaster cards: SoundBlaster 1.0, SoundBlaster 2.0, | |
1931 | SoundBlaster Pro | |
1932 | ||
1933 | port | |
1934 | port # for SB DSP chip (0x220,0x240,0x260) | |
1935 | irq | |
1936 | IRQ # for SB DSP chip (5,7,9,10) | |
1937 | dma8 | |
1938 | DMA # for SB DSP chip (1,3) | |
1939 | ||
1940 | This module supports multiple cards and autoprobe. | |
1941 | ||
1942 | The power-management is supported. | |
1943 | ||
1944 | Module snd-sb16 and snd-sbawe | |
1945 | ----------------------------- | |
1946 | ||
1947 | Module for 16-bit SoundBlaster cards: SoundBlaster 16 (PnP), | |
1948 | SoundBlaster AWE 32 (PnP), SoundBlaster AWE 64 PnP | |
1949 | ||
1950 | mic_agc | |
1951 | Mic Auto-Gain-Control - 0 = disable, 1 = enable (default) | |
1952 | csp | |
1953 | ASP/CSP chip support - 0 = disable (default), 1 = enable | |
1954 | isapnp | |
1955 | ISA PnP detection - 0 = disable, 1 = enable (default) | |
1956 | ||
1957 | with isapnp=0, the following options are available: | |
1958 | ||
1959 | port | |
1960 | port # for SB DSP 4.x chip (0x220,0x240,0x260) | |
1961 | mpu_port | |
1962 | port # for MPU-401 UART (0x300,0x330), -1 = disable | |
1963 | awe_port | |
1964 | base port # for EMU8000 synthesizer (0x620,0x640,0x660) (snd-sbawe | |
1965 | module only) | |
1966 | irq | |
1967 | IRQ # for SB DSP 4.x chip (5,7,9,10) | |
1968 | dma8 | |
1969 | 8-bit DMA # for SB DSP 4.x chip (0,1,3) | |
1970 | dma16 | |
1971 | 16-bit DMA # for SB DSP 4.x chip (5,6,7) | |
1972 | ||
1973 | This module supports multiple cards, autoprobe and ISA PnP. | |
1974 | ||
1975 | Note: To use Vibra16X cards in 16-bit half duplex mode, you must | |
1976 | disable 16bit DMA with dma16 = -1 module parameter. | |
1977 | Also, all Sound Blaster 16 type cards can operate in 16-bit | |
1978 | half duplex mode through 8-bit DMA channel by disabling their | |
1979 | 16-bit DMA channel. | |
1980 | ||
1981 | The power-management is supported. | |
1982 | ||
1983 | Module snd-sc6000 | |
1984 | ----------------- | |
1985 | ||
1986 | Module for Gallant SC-6000 soundcard and later models: SC-6600 and | |
1987 | SC-7000. | |
1988 | ||
1989 | port | |
1990 | Port # (0x220 or 0x240) | |
1991 | mss_port | |
1992 | MSS Port # (0x530 or 0xe80) | |
1993 | irq | |
1994 | IRQ # (5,7,9,10,11) | |
1995 | mpu_irq | |
1996 | MPU-401 IRQ # (5,7,9,10) ,0 - no MPU-401 irq | |
1997 | dma | |
1998 | DMA # (1,3,0) | |
1999 | joystick | |
2000 | Enable gameport - 0 = disable (default), 1 = enable | |
2001 | ||
2002 | This module supports multiple cards. | |
2003 | ||
2004 | This card is also known as Audio Excel DSP 16 or Zoltrix AV302. | |
2005 | ||
2006 | Module snd-sscape | |
2007 | ----------------- | |
2008 | ||
2009 | Module for ENSONIQ SoundScape cards. | |
2010 | ||
2011 | port | |
2012 | Port # (PnP setup) | |
2013 | wss_port | |
2014 | WSS Port # (PnP setup) | |
2015 | irq | |
2016 | IRQ # (PnP setup) | |
2017 | mpu_irq | |
2018 | MPU-401 IRQ # (PnP setup) | |
2019 | dma | |
2020 | DMA # (PnP setup) | |
2021 | dma2 | |
2022 | 2nd DMA # (PnP setup, -1 to disable) | |
2023 | joystick | |
2024 | Enable gameport - 0 = disable (default), 1 = enable | |
2025 | ||
2026 | This module supports multiple cards. | |
2027 | ||
2028 | The driver requires the firmware loader support on kernel. | |
2029 | ||
2030 | Module snd-sun-amd7930 (on sparc only) | |
2031 | -------------------------------------- | |
2032 | ||
2033 | Module for AMD7930 sound chips found on Sparcs. | |
2034 | ||
2035 | This module supports multiple cards. | |
2036 | ||
2037 | Module snd-sun-cs4231 (on sparc only) | |
2038 | ------------------------------------- | |
2039 | ||
2040 | Module for CS4231 sound chips found on Sparcs. | |
2041 | ||
2042 | This module supports multiple cards. | |
2043 | ||
2044 | Module snd-sun-dbri (on sparc only) | |
2045 | ----------------------------------- | |
2046 | ||
2047 | Module for DBRI sound chips found on Sparcs. | |
2048 | ||
2049 | This module supports multiple cards. | |
2050 | ||
2051 | Module snd-wavefront | |
2052 | -------------------- | |
2053 | ||
2054 | Module for Turtle Beach Maui, Tropez and Tropez+ sound cards. | |
2055 | ||
2056 | use_cs4232_midi | |
2057 | Use CS4232 MPU-401 interface | |
2058 | (inaccessibly located inside your computer) | |
2059 | isapnp | |
2060 | ISA PnP detection - 0 = disable, 1 = enable (default) | |
2061 | ||
2062 | with isapnp=0, the following options are available: | |
2063 | ||
2064 | cs4232_pcm_port | |
2065 | Port # for CS4232 PCM interface. | |
2066 | cs4232_pcm_irq | |
2067 | IRQ # for CS4232 PCM interface (5,7,9,11,12,15). | |
2068 | cs4232_mpu_port | |
2069 | Port # for CS4232 MPU-401 interface. | |
2070 | cs4232_mpu_irq | |
2071 | IRQ # for CS4232 MPU-401 interface (9,11,12,15). | |
2072 | ics2115_port | |
2073 | Port # for ICS2115 | |
2074 | ics2115_irq | |
2075 | IRQ # for ICS2115 | |
2076 | fm_port | |
2077 | FM OPL-3 Port # | |
2078 | dma1 | |
2079 | DMA1 # for CS4232 PCM interface. | |
2080 | dma2 | |
2081 | DMA2 # for CS4232 PCM interface. | |
2082 | ||
2083 | The below are options for wavefront_synth features: | |
2084 | ||
2085 | wf_raw | |
2086 | Assume that we need to boot the OS (default:no); | |
2087 | If yes, then during driver loading, the state of the board is | |
2088 | ignored, and we reset the board and load the firmware anyway. | |
2089 | fx_raw | |
2090 | Assume that the FX process needs help (default:yes); | |
2091 | If false, we'll leave the FX processor in whatever state it is | |
2092 | when the driver is loaded. The default is to download the | |
2093 | microprogram and associated coefficients to set it up for | |
2094 | "default" operation, whatever that means. | |
2095 | debug_default | |
2096 | Debug parameters for card initialization | |
2097 | wait_usecs | |
2098 | How long to wait without sleeping, usecs (default:150); | |
2099 | This magic number seems to give pretty optimal throughput | |
2100 | based on my limited experimentation. | |
2101 | If you want to play around with it and find a better value, be | |
2102 | my guest. Remember, the idea is to get a number that causes us | |
2103 | to just busy wait for as many WaveFront commands as possible, | |
2104 | without coming up with a number so large that we hog the whole | |
2105 | CPU. | |
2106 | Specifically, with this number, out of about 134,000 status | |
2107 | waits, only about 250 result in a sleep. | |
2108 | sleep_interval | |
2109 | How long to sleep when waiting for reply (default: 100) | |
2110 | sleep_tries | |
2111 | How many times to try sleeping during a wait (default: 50) | |
2112 | ospath | |
2113 | Pathname to processed ICS2115 OS firmware (default:wavefront.os); | |
2114 | The path name of the ISC2115 OS firmware. In the recent | |
2115 | version, it's handled via firmware loader framework, so it | |
2116 | must be installed in the proper path, typically, | |
2117 | /lib/firmware. | |
2118 | reset_time | |
2119 | How long to wait for a reset to take effect (default:2) | |
2120 | ramcheck_time | |
2121 | How many seconds to wait for the RAM test (default:20) | |
2122 | osrun_time | |
2123 | How many seconds to wait for the ICS2115 OS (default:10) | |
2124 | ||
2125 | This module supports multiple cards and ISA PnP. | |
2126 | ||
2127 | Note: the firmware file ``wavefront.os`` was located in the earlier | |
2128 | version in /etc. Now it's loaded via firmware loader, and | |
2129 | must be in the proper firmware path, such as /lib/firmware. | |
2130 | Copy (or symlink) the file appropriately if you get an error | |
2131 | regarding firmware downloading after upgrading the kernel. | |
2132 | ||
2133 | Module snd-sonicvibes | |
2134 | --------------------- | |
2135 | ||
2136 | Module for S3 SonicVibes PCI sound cards. | |
2137 | * PINE Schubert 32 PCI | |
2138 | ||
2139 | reverb | |
2140 | Reverb Enable - 1 = enable, 0 = disable (default); | |
2141 | SoundCard must have onboard SRAM for this. | |
2142 | mge | |
2143 | Mic Gain Enable - 1 = enable, 0 = disable (default) | |
2144 | ||
2145 | This module supports multiple cards and autoprobe. | |
2146 | ||
2147 | Module snd-serial-u16550 | |
2148 | ------------------------ | |
2149 | ||
2150 | Module for UART16550A serial MIDI ports. | |
2151 | ||
2152 | port | |
2153 | port # for UART16550A chip | |
2154 | irq | |
2155 | IRQ # for UART16550A chip, -1 = poll mode | |
2156 | speed | |
2157 | speed in bauds (9600,19200,38400,57600,115200) | |
2158 | 38400 = default | |
2159 | base | |
2160 | base for divisor in bauds (57600,115200,230400,460800) | |
2161 | 115200 = default | |
2162 | outs | |
2163 | number of MIDI ports in a serial port (1-4) | |
2164 | 1 = default | |
2165 | adaptor | |
2166 | Type of adaptor. | |
2167 | 0 = Soundcanvas, 1 = MS-124T, 2 = MS-124W S/A, | |
2168 | 3 = MS-124W M/B, 4 = Generic | |
2169 | ||
2170 | This module supports multiple cards. This module does not support autoprobe | |
2171 | thus the main port must be specified!!! Other options are optional. | |
2172 | ||
2173 | Module snd-trident | |
2174 | ------------------ | |
2175 | ||
2176 | Module for Trident 4DWave DX/NX sound cards. | |
2177 | * Best Union Miss Melody 4DWave PCI | |
2178 | * HIS 4DWave PCI | |
2179 | * Warpspeed ONSpeed 4DWave PCI | |
2180 | * AzTech PCI 64-Q3D | |
2181 | * Addonics SV 750 | |
2182 | * CHIC True Sound 4Dwave | |
2183 | * Shark Predator4D-PCI | |
2184 | * Jaton SonicWave 4D | |
2185 | * SiS SI7018 PCI Audio | |
2186 | * Hoontech SoundTrack Digital 4DWave NX | |
2187 | ||
2188 | pcm_channels | |
2189 | max channels (voices) reserved for PCM | |
2190 | wavetable_size | |
2191 | max wavetable size in kB (4-?kb) | |
2192 | ||
2193 | This module supports multiple cards and autoprobe. | |
2194 | ||
2195 | The power-management is supported. | |
2196 | ||
2197 | Module snd-ua101 | |
2198 | ---------------- | |
2199 | ||
2200 | Module for the Edirol UA-101/UA-1000 audio/MIDI interfaces. | |
2201 | ||
2202 | This module supports multiple devices, autoprobe and hotplugging. | |
2203 | ||
2204 | Module snd-usb-audio | |
2205 | -------------------- | |
2206 | ||
2207 | Module for USB audio and USB MIDI devices. | |
2208 | ||
2209 | vid | |
2210 | Vendor ID for the device (optional) | |
2211 | pid | |
2212 | Product ID for the device (optional) | |
2213 | nrpacks | |
2214 | Max. number of packets per URB (default: 8) | |
2215 | device_setup | |
2216 | Device specific magic number (optional); | |
2217 | Influence depends on the device | |
2218 | Default: 0x0000 | |
2219 | ignore_ctl_error | |
2220 | Ignore any USB-controller regarding mixer interface (default: no) | |
2221 | autoclock | |
2222 | Enable auto-clock selection for UAC2 devices (default: yes) | |
2223 | quirk_alias | |
2224 | Quirk alias list, pass strings like ``0123abcd:5678beef``, which | |
2225 | applies the existing quirk for the device 5678:beef to a new | |
2226 | device 0123:abcd. | |
f274baa4 TI |
2227 | use_vmalloc |
2228 | Use vmalloc() for allocations of the PCM buffers (default: yes). | |
2229 | For architectures with non-coherent memory like ARM or MIPS, the | |
2230 | mmap access may give inconsistent results with vmalloc'ed | |
2231 | buffers. If mmap is used on such architectures, turn off this | |
2232 | option, so that the DMA-coherent buffers are allocated and used | |
2233 | instead. | |
f6d23df5 TI |
2234 | |
2235 | This module supports multiple devices, autoprobe and hotplugging. | |
2236 | ||
2237 | NB: ``nrpacks`` parameter can be modified dynamically via sysfs. | |
2238 | Don't put the value over 20. Changing via sysfs has no sanity | |
2239 | check. | |
2240 | ||
2241 | NB: ``ignore_ctl_error=1`` may help when you get an error at accessing | |
2242 | the mixer element such as URB error -22. This happens on some | |
2243 | buggy USB device or the controller. | |
2244 | ||
2245 | NB: quirk_alias option is provided only for testing / development. | |
2246 | If you want to have a proper support, contact to upstream for | |
2247 | adding the matching quirk in the driver code statically. | |
2248 | ||
2249 | Module snd-usb-caiaq | |
2250 | -------------------- | |
2251 | ||
2252 | Module for caiaq UB audio interfaces, | |
2253 | ||
2254 | * Native Instruments RigKontrol2 | |
2255 | * Native Instruments Kore Controller | |
2256 | * Native Instruments Audio Kontrol 1 | |
2257 | * Native Instruments Audio 8 DJ | |
2258 | ||
2259 | This module supports multiple devices, autoprobe and hotplugging. | |
2260 | ||
2261 | Module snd-usb-usx2y | |
2262 | -------------------- | |
2263 | ||
2264 | Module for Tascam USB US-122, US-224 and US-428 devices. | |
2265 | ||
2266 | This module supports multiple devices, autoprobe and hotplugging. | |
2267 | ||
2268 | Note: you need to load the firmware via ``usx2yloader`` utility included | |
2269 | in alsa-tools and alsa-firmware packages. | |
2270 | ||
2271 | Module snd-via82xx | |
2272 | ------------------ | |
2273 | ||
2274 | Module for AC'97 motherboards based on VIA 82C686A/686B, 8233, 8233A, | |
2275 | 8233C, 8235, 8237 (south) bridge. | |
2276 | ||
2277 | mpu_port | |
2278 | 0x300,0x310,0x320,0x330, otherwise obtain BIOS setup | |
2279 | [VIA686A/686B only] | |
2280 | joystick | |
2281 | Enable joystick (default off) [VIA686A/686B only] | |
2282 | ac97_clock | |
2283 | AC'97 codec clock base (default 48000Hz) | |
2284 | dxs_support | |
2285 | support DXS channels, 0 = auto (default), 1 = enable, 2 = disable, | |
2286 | 3 = 48k only, 4 = no VRA, 5 = enable any sample rate and different | |
2287 | sample rates on different channels [VIA8233/C, 8235, 8237 only] | |
2288 | ac97_quirk | |
2289 | AC'97 workaround for strange hardware; | |
2290 | See `AC97 Quirk Option`_ section below. | |
2291 | ||
2292 | This module supports one chip and autoprobe. | |
2293 | ||
2294 | Note: on some SMP motherboards like MSI 694D the interrupts might | |
2295 | not be generated properly. In such a case, please try to | |
2296 | set the SMP (or MPS) version on BIOS to 1.1 instead of | |
2297 | default value 1.4. Then the interrupt number will be | |
2298 | assigned under 15. You might also upgrade your BIOS. | |
2299 | ||
2300 | Note: VIA8233/5/7 (not VIA8233A) can support DXS (direct sound) | |
2301 | channels as the first PCM. On these channels, up to 4 | |
2302 | streams can be played at the same time, and the controller | |
2303 | can perform sample rate conversion with separate rates for | |
2304 | each channel. | |
2305 | As default (``dxs_support = 0``), 48k fixed rate is chosen | |
2306 | except for the known devices since the output is often | |
2307 | noisy except for 48k on some mother boards due to the | |
2308 | bug of BIOS. | |
2309 | Please try once ``dxs_support=5`` and if it works on other | |
2310 | sample rates (e.g. 44.1kHz of mp3 playback), please let us | |
2311 | know the PCI subsystem vendor/device id's (output of | |
2312 | ``lspci -nv``). | |
2313 | If ``dxs_support=5`` does not work, try ``dxs_support=4``; if it | |
2314 | doesn't work too, try dxs_support=1. (dxs_support=1 is | |
2315 | usually for old motherboards. The correct implemented | |
2316 | board should work with 4 or 5.) If it still doesn't | |
2317 | work and the default setting is ok, ``dxs_support=3`` is the | |
2318 | right choice. If the default setting doesn't work at all, | |
2319 | try ``dxs_support=2`` to disable the DXS channels. | |
2320 | In any cases, please let us know the result and the | |
2321 | subsystem vendor/device ids. See `Links and Addresses`_ | |
2322 | below. | |
2323 | ||
2324 | Note: for the MPU401 on VIA823x, use snd-mpu401 driver | |
2325 | additionally. The mpu_port option is for VIA686 chips only. | |
2326 | ||
2327 | The power-management is supported. | |
2328 | ||
2329 | Module snd-via82xx-modem | |
2330 | ------------------------ | |
2331 | ||
2332 | Module for VIA82xx AC97 modem | |
2333 | ||
2334 | ac97_clock | |
2335 | AC'97 codec clock base (default 48000Hz) | |
2336 | ||
2337 | This module supports one card and autoprobe. | |
2338 | ||
2339 | Note: The default index value of this module is -2, i.e. the first | |
2340 | slot is excluded. | |
2341 | ||
2342 | The power-management is supported. | |
2343 | ||
2344 | Module snd-virmidi | |
2345 | ------------------ | |
2346 | ||
2347 | Module for virtual rawmidi devices. | |
2348 | This module creates virtual rawmidi devices which communicate | |
2349 | to the corresponding ALSA sequencer ports. | |
2350 | ||
2351 | midi_devs | |
2352 | MIDI devices # (1-4, default=4) | |
2353 | ||
2354 | This module supports multiple cards. | |
2355 | ||
2356 | Module snd-virtuoso | |
2357 | ------------------- | |
2358 | ||
2359 | Module for sound cards based on the Asus AV66/AV100/AV200 chips, | |
2360 | i.e., Xonar D1, DX, D2, D2X, DS, DSX, Essence ST (Deluxe), | |
2361 | Essence STX (II), HDAV1.3 (Deluxe), and HDAV1.3 Slim. | |
2362 | ||
2363 | This module supports autoprobe and multiple cards. | |
2364 | ||
2365 | Module snd-vx222 | |
2366 | ---------------- | |
2367 | ||
2368 | Module for Digigram VX-Pocket VX222, V222 v2 and Mic cards. | |
2369 | ||
2370 | mic | |
2371 | Enable Microphone on V222 Mic (NYI) | |
2372 | ibl | |
2373 | Capture IBL size. (default = 0, minimum size) | |
2374 | ||
2375 | This module supports multiple cards. | |
2376 | ||
2377 | When the driver is compiled as a module and the hotplug firmware | |
2378 | is supported, the firmware data is loaded via hotplug automatically. | |
2379 | Install the necessary firmware files in alsa-firmware package. | |
2380 | When no hotplug fw loader is available, you need to load the | |
2381 | firmware via vxloader utility in alsa-tools package. To invoke | |
2382 | vxloader automatically, add the following to /etc/modprobe.d/alsa.conf | |
2383 | ||
2384 | :: | |
2385 | ||
2386 | install snd-vx222 /sbin/modprobe --first-time -i snd-vx222\ | |
2387 | && /usr/bin/vxloader | |
2388 | ||
2389 | (for 2.2/2.4 kernels, add ``post-install /usr/bin/vxloader`` to | |
2390 | /etc/modules.conf, instead.) | |
2391 | IBL size defines the interrupts period for PCM. The smaller size | |
2392 | gives smaller latency but leads to more CPU consumption, too. | |
2393 | The size is usually aligned to 126. As default (=0), the smallest | |
2394 | size is chosen. The possible IBL values can be found in | |
2395 | /proc/asound/cardX/vx-status proc file. | |
2396 | ||
2397 | The power-management is supported. | |
2398 | ||
2399 | Module snd-vxpocket | |
2400 | ------------------- | |
2401 | ||
2402 | Module for Digigram VX-Pocket VX2 and 440 PCMCIA cards. | |
2403 | ||
2404 | ibl | |
2405 | Capture IBL size. (default = 0, minimum size) | |
2406 | ||
2407 | This module supports multiple cards. The module is compiled only when | |
2408 | PCMCIA is supported on kernel. | |
2409 | ||
2410 | With the older 2.6.x kernel, to activate the driver via the card | |
2411 | manager, you'll need to set up /etc/pcmcia/vxpocket.conf. See the | |
2412 | sound/pcmcia/vx/vxpocket.c. 2.6.13 or later kernel requires no | |
2413 | longer require a config file. | |
2414 | ||
2415 | When the driver is compiled as a module and the hotplug firmware | |
2416 | is supported, the firmware data is loaded via hotplug automatically. | |
2417 | Install the necessary firmware files in alsa-firmware package. | |
2418 | When no hotplug fw loader is available, you need to load the | |
2419 | firmware via vxloader utility in alsa-tools package. | |
2420 | ||
2421 | About capture IBL, see the description of snd-vx222 module. | |
2422 | ||
2423 | Note: snd-vxp440 driver is merged to snd-vxpocket driver since | |
2424 | ALSA 1.0.10. | |
2425 | ||
2426 | The power-management is supported. | |
2427 | ||
2428 | Module snd-ymfpci | |
2429 | ----------------- | |
2430 | ||
2431 | Module for Yamaha PCI chips (YMF72x, YMF74x & YMF75x). | |
2432 | ||
2433 | mpu_port | |
2434 | 0x300,0x330,0x332,0x334, 0 (disable) by default, | |
2435 | 1 (auto-detect for YMF744/754 only) | |
2436 | fm_port | |
2437 | 0x388,0x398,0x3a0,0x3a8, 0 (disable) by default | |
2438 | 1 (auto-detect for YMF744/754 only) | |
2439 | joystick_port | |
2440 | 0x201,0x202,0x204,0x205, 0 (disable) by default, | |
2441 | 1 (auto-detect) | |
2442 | rear_switch | |
2443 | enable shared rear/line-in switch (bool) | |
2444 | ||
2445 | This module supports autoprobe and multiple chips. | |
2446 | ||
2447 | The power-management is supported. | |
2448 | ||
2449 | Module snd-pdaudiocf | |
2450 | -------------------- | |
2451 | ||
2452 | Module for Sound Core PDAudioCF sound card. | |
2453 | ||
2454 | The power-management is supported. | |
2455 | ||
2456 | ||
2457 | AC97 Quirk Option | |
2458 | ================= | |
2459 | ||
2460 | The ac97_quirk option is used to enable/override the workaround for | |
2461 | specific devices on drivers for on-board AC'97 controllers like | |
2462 | snd-intel8x0. Some hardware have swapped output pins between Master | |
2463 | and Headphone, or Surround (thanks to confusion of AC'97 | |
2464 | specifications from version to version :-) | |
2465 | ||
2466 | The driver provides the auto-detection of known problematic devices, | |
2467 | but some might be unknown or wrongly detected. In such a case, pass | |
2468 | the proper value with this option. | |
2469 | ||
2470 | The following strings are accepted: | |
2471 | ||
2472 | default | |
2473 | Don't override the default setting | |
2474 | none | |
2475 | Disable the quirk | |
2476 | hp_only | |
2477 | Bind Master and Headphone controls as a single control | |
2478 | swap_hp | |
2479 | Swap headphone and master controls | |
2480 | swap_surround | |
2481 | Swap master and surround controls | |
2482 | ad_sharing | |
2483 | For AD1985, turn on OMS bit and use headphone | |
2484 | alc_jack | |
2485 | For ALC65x, turn on the jack sense mode | |
2486 | inv_eapd | |
2487 | Inverted EAPD implementation | |
2488 | mute_led | |
2489 | Bind EAPD bit for turning on/off mute LED | |
2490 | ||
2491 | For backward compatibility, the corresponding integer value -1, 0, ... | |
2492 | are accepted, too. | |
2493 | ||
2494 | For example, if ``Master`` volume control has no effect on your device | |
2495 | but only ``Headphone`` does, pass ac97_quirk=hp_only module option. | |
2496 | ||
2497 | ||
2498 | Configuring Non-ISAPNP Cards | |
2499 | ============================ | |
2500 | ||
2501 | When the kernel is configured with ISA-PnP support, the modules | |
2502 | supporting the isapnp cards will have module options ``isapnp``. | |
2503 | If this option is set, *only* the ISA-PnP devices will be probed. | |
2504 | For probing the non ISA-PnP cards, you have to pass ``isapnp=0`` option | |
2505 | together with the proper i/o and irq configuration. | |
2506 | ||
2507 | When the kernel is configured without ISA-PnP support, isapnp option | |
2508 | will be not built in. | |
2509 | ||
2510 | ||
2511 | Module Autoloading Support | |
2512 | ========================== | |
2513 | ||
2514 | The ALSA drivers can be loaded automatically on demand by defining | |
2515 | module aliases. The string ``snd-card-%1`` is requested for ALSA native | |
2516 | devices where ``%i`` is sound card number from zero to seven. | |
2517 | ||
2518 | To auto-load an ALSA driver for OSS services, define the string | |
2519 | ``sound-slot-%i`` where ``%i`` means the slot number for OSS, which | |
2520 | corresponds to the card index of ALSA. Usually, define this | |
2521 | as the same card module. | |
2522 | ||
2523 | An example configuration for a single emu10k1 card is like below: | |
2524 | :: | |
2525 | ||
2526 | ----- /etc/modprobe.d/alsa.conf | |
2527 | alias snd-card-0 snd-emu10k1 | |
2528 | alias sound-slot-0 snd-emu10k1 | |
2529 | ----- /etc/modprobe.d/alsa.conf | |
2530 | ||
2531 | The available number of auto-loaded sound cards depends on the module | |
2532 | option ``cards_limit`` of snd module. As default it's set to 1. | |
2533 | To enable the auto-loading of multiple cards, specify the number of | |
2534 | sound cards in that option. | |
2535 | ||
2536 | When multiple cards are available, it'd better to specify the index | |
2537 | number for each card via module option, too, so that the order of | |
2538 | cards is kept consistent. | |
2539 | ||
2540 | An example configuration for two sound cards is like below: | |
2541 | :: | |
2542 | ||
2543 | ----- /etc/modprobe.d/alsa.conf | |
2544 | # ALSA portion | |
2545 | options snd cards_limit=2 | |
2546 | alias snd-card-0 snd-interwave | |
2547 | alias snd-card-1 snd-ens1371 | |
2548 | options snd-interwave index=0 | |
2549 | options snd-ens1371 index=1 | |
2550 | # OSS/Free portion | |
2551 | alias sound-slot-0 snd-interwave | |
2552 | alias sound-slot-1 snd-ens1371 | |
2553 | ----- /etc/modprobe.d/alsa.conf | |
2554 | ||
2555 | In this example, the interwave card is always loaded as the first card | |
2556 | (index 0) and ens1371 as the second (index 1). | |
2557 | ||
2558 | Alternative (and new) way to fixate the slot assignment is to use | |
2559 | ``slots`` option of snd module. In the case above, specify like the | |
2560 | following: | |
2561 | :: | |
2562 | ||
2563 | options snd slots=snd-interwave,snd-ens1371 | |
2564 | ||
2565 | Then, the first slot (#0) is reserved for snd-interwave driver, and | |
2566 | the second (#1) for snd-ens1371. You can omit index option in each | |
2567 | driver if slots option is used (although you can still have them at | |
2568 | the same time as long as they don't conflict). | |
2569 | ||
2570 | The slots option is especially useful for avoiding the possible | |
2571 | hot-plugging and the resultant slot conflict. For example, in the | |
2572 | case above again, the first two slots are already reserved. If any | |
2573 | other driver (e.g. snd-usb-audio) is loaded before snd-interwave or | |
2574 | snd-ens1371, it will be assigned to the third or later slot. | |
2575 | ||
2576 | When a module name is given with '!', the slot will be given for any | |
2577 | modules but that name. For example, ``slots=!snd-pcsp`` will reserve | |
2578 | the first slot for any modules but snd-pcsp. | |
2579 | ||
2580 | ||
2581 | ALSA PCM devices to OSS devices mapping | |
2582 | ======================================= | |
2583 | :: | |
2584 | ||
2585 | /dev/snd/pcmC0D0[c|p] -> /dev/audio0 (/dev/audio) -> minor 4 | |
2586 | /dev/snd/pcmC0D0[c|p] -> /dev/dsp0 (/dev/dsp) -> minor 3 | |
2587 | /dev/snd/pcmC0D1[c|p] -> /dev/adsp0 (/dev/adsp) -> minor 12 | |
2588 | /dev/snd/pcmC1D0[c|p] -> /dev/audio1 -> minor 4+16 = 20 | |
2589 | /dev/snd/pcmC1D0[c|p] -> /dev/dsp1 -> minor 3+16 = 19 | |
2590 | /dev/snd/pcmC1D1[c|p] -> /dev/adsp1 -> minor 12+16 = 28 | |
2591 | /dev/snd/pcmC2D0[c|p] -> /dev/audio2 -> minor 4+32 = 36 | |
2592 | /dev/snd/pcmC2D0[c|p] -> /dev/dsp2 -> minor 3+32 = 39 | |
2593 | /dev/snd/pcmC2D1[c|p] -> /dev/adsp2 -> minor 12+32 = 44 | |
2594 | ||
2595 | The first number from ``/dev/snd/pcmC{X}D{Y}[c|p]`` expression means | |
2596 | sound card number and second means device number. The ALSA devices | |
2597 | have either ``c`` or ``p`` suffix indicating the direction, capture and | |
2598 | playback, respectively. | |
2599 | ||
2600 | Please note that the device mapping above may be varied via the module | |
2601 | options of snd-pcm-oss module. | |
2602 | ||
2603 | ||
2604 | Proc interfaces (/proc/asound) | |
2605 | ============================== | |
2606 | ||
2607 | /proc/asound/card#/pcm#[cp]/oss | |
2608 | ------------------------------- | |
2609 | erase | |
2610 | erase all additional information about OSS applications | |
2611 | ||
2612 | <app_name> <fragments> <fragment_size> [<options>] | |
2613 | <app_name> | |
2614 | name of application with (higher priority) or without path | |
2615 | <fragments> | |
2616 | number of fragments or zero if auto | |
2617 | <fragment_size> | |
2618 | size of fragment in bytes or zero if auto | |
2619 | <options> | |
2620 | optional parameters | |
2621 | ||
2622 | disable | |
2623 | the application tries to open a pcm device for | |
2624 | this channel but does not want to use it. | |
2625 | (Cause a bug or mmap needs) | |
2626 | It's good for Quake etc... | |
2627 | direct | |
2628 | don't use plugins | |
2629 | block | |
2630 | force block mode (rvplayer) | |
2631 | non-block | |
2632 | force non-block mode | |
2633 | whole-frag | |
2634 | write only whole fragments (optimization affecting | |
2635 | playback only) | |
2636 | no-silence | |
2637 | do not fill silence ahead to avoid clicks | |
2638 | buggy-ptr | |
2639 | Returns the whitespace blocks in GETOPTR ioctl | |
2640 | instead of filled blocks | |
2641 | ||
2642 | Example: | |
2643 | :: | |
2644 | ||
2645 | echo "x11amp 128 16384" > /proc/asound/card0/pcm0p/oss | |
2646 | echo "squake 0 0 disable" > /proc/asound/card0/pcm0c/oss | |
2647 | echo "rvplayer 0 0 block" > /proc/asound/card0/pcm0p/oss | |
2648 | ||
2649 | ||
2650 | Early Buffer Allocation | |
2651 | ======================= | |
2652 | ||
2653 | Some drivers (e.g. hdsp) require the large contiguous buffers, and | |
2654 | sometimes it's too late to find such spaces when the driver module is | |
2655 | actually loaded due to memory fragmentation. You can pre-allocate the | |
2656 | PCM buffers by loading snd-page-alloc module and write commands to its | |
2657 | proc file in prior, for example, in the early boot stage like | |
2658 | ``/etc/init.d/*.local`` scripts. | |
2659 | ||
2660 | Reading the proc file /proc/drivers/snd-page-alloc shows the current | |
2661 | usage of page allocation. In writing, you can send the following | |
2662 | commands to the snd-page-alloc driver: | |
2663 | ||
2664 | * add VENDOR DEVICE MASK SIZE BUFFERS | |
2665 | ||
2666 | VENDOR and DEVICE are PCI vendor and device IDs. They take | |
2667 | integer numbers (0x prefix is needed for the hex). | |
2668 | MASK is the PCI DMA mask. Pass 0 if not restricted. | |
2669 | SIZE is the size of each buffer to allocate. You can pass | |
2670 | k and m suffix for KB and MB. The max number is 16MB. | |
2671 | BUFFERS is the number of buffers to allocate. It must be greater | |
2672 | than 0. The max number is 4. | |
2673 | ||
2674 | * erase | |
2675 | ||
2676 | This will erase the all pre-allocated buffers which are not in | |
2677 | use. | |
2678 | ||
2679 | ||
2680 | Links and Addresses | |
2681 | =================== | |
2682 | ||
2683 | ALSA project homepage | |
2684 | http://www.alsa-project.org | |
2685 | Kernel Bugzilla | |
2686 | http://bugzilla.kernel.org/ | |
2687 | ALSA Developers ML | |
2688 | mailto:alsa-devel@alsa-project.org | |
2689 | alsa-info.sh script | |
2690 | http://www.alsa-project.org/alsa-info.sh |