]>
Commit | Line | Data |
---|---|---|
aa4d5203 | 1 | .. include:: <isonum.txt> |
1da177e4 | 2 | |
aa4d5203 MCC |
3 | ================================= |
4 | Video Mode Selection Support 2.13 | |
5 | ================================= | |
6 | ||
7 | :Copyright: |copy| 1995--1999 Martin Mares, <mj@ucw.cz> | |
8 | ||
9 | Intro | |
10 | ~~~~~ | |
11 | ||
12 | This small document describes the "Video Mode Selection" feature which | |
1da177e4 LT |
13 | allows the use of various special video modes supported by the video BIOS. Due |
14 | to usage of the BIOS, the selection is limited to boot time (before the | |
15 | kernel decompression starts) and works only on 80X86 machines. | |
16 | ||
aa4d5203 | 17 | .. note:: |
1da177e4 | 18 | |
aa4d5203 MCC |
19 | Short intro for the impatient: Just use vga=ask for the first time, |
20 | enter ``scan`` on the video mode prompt, pick the mode you want to use, | |
21 | remember its mode ID (the four-digit hexadecimal number) and then | |
22 | set the vga parameter to this number (converted to decimal first). | |
23 | ||
24 | The video mode to be used is selected by a kernel parameter which can be | |
1da177e4 LT |
25 | specified in the kernel Makefile (the SVGA_MODE=... line) or by the "vga=..." |
26 | option of LILO (or some other boot loader you use) or by the "vidmode" utility | |
27 | (present in standard Linux utility packages). You can use the following values | |
aa4d5203 | 28 | of this parameter:: |
1da177e4 LT |
29 | |
30 | NORMAL_VGA - Standard 80x25 mode available on all display adapters. | |
31 | ||
32 | EXTENDED_VGA - Standard 8-pixel font mode: 80x43 on EGA, 80x50 on VGA. | |
33 | ||
34 | ASK_VGA - Display a video mode menu upon startup (see below). | |
35 | ||
36 | 0..35 - Menu item number (when you have used the menu to view the list of | |
37 | modes available on your adapter, you can specify the menu item you want | |
38 | to use). 0..9 correspond to "0".."9", 10..35 to "a".."z". Warning: the | |
39 | mode list displayed may vary as the kernel version changes, because the | |
40 | modes are listed in a "first detected -- first displayed" manner. It's | |
41 | better to use absolute mode numbers instead. | |
42 | ||
43 | 0x.... - Hexadecimal video mode ID (also displayed on the menu, see below | |
44 | for exact meaning of the ID). Warning: rdev and LILO don't support | |
45 | hexadecimal numbers -- you have to convert it to decimal manually. | |
46 | ||
aa4d5203 MCC |
47 | Menu |
48 | ~~~~ | |
49 | ||
50 | The ASK_VGA mode causes the kernel to offer a video mode menu upon | |
1da177e4 LT |
51 | bootup. It displays a "Press <RETURN> to see video modes available, <SPACE> |
52 | to continue or wait 30 secs" message. If you press <RETURN>, you enter the | |
53 | menu, if you press <SPACE> or wait 30 seconds, the kernel will boot up in | |
54 | the standard 80x25 mode. | |
55 | ||
aa4d5203 | 56 | The menu looks like:: |
1da177e4 | 57 | |
aa4d5203 MCC |
58 | Video adapter: <name-of-detected-video-adapter> |
59 | Mode: COLSxROWS: | |
60 | 0 0F00 80x25 | |
61 | 1 0F01 80x50 | |
62 | 2 0F02 80x43 | |
63 | 3 0F03 80x26 | |
64 | .... | |
65 | Enter mode number or ``scan``: <flashing-cursor-here> | |
1da177e4 | 66 | |
aa4d5203 | 67 | <name-of-detected-video-adapter> tells what video adapter did Linux detect |
1da177e4 LT |
68 | -- it's either a generic adapter name (MDA, CGA, HGC, EGA, VGA, VESA VGA [a VGA |
69 | with VESA-compliant BIOS]) or a chipset name (e.g., Trident). Direct detection | |
0cf9bb67 | 70 | of chipsets is turned off by default as it's inherently unreliable due to |
1da177e4 LT |
71 | absolutely insane PC design. |
72 | ||
aa4d5203 | 73 | "0 0F00 80x25" means that the first menu item (the menu items are numbered |
1da177e4 LT |
74 | from "0" to "9" and from "a" to "z") is a 80x25 mode with ID=0x0f00 (see the |
75 | next section for a description of mode IDs). | |
76 | ||
aa4d5203 | 77 | <flashing-cursor-here> encourages you to enter the item number or mode ID |
1da177e4 LT |
78 | you wish to set and press <RETURN>. If the computer complains something about |
79 | "Unknown mode ID", it is trying to tell you that it isn't possible to set such | |
80 | a mode. It's also possible to press only <RETURN> which leaves the current mode. | |
81 | ||
aa4d5203 | 82 | The mode list usually contains a few basic modes and some VESA modes. In |
1da177e4 LT |
83 | case your chipset has been detected, some chipset-specific modes are shown as |
84 | well (some of these might be missing or unusable on your machine as different | |
85 | BIOSes are often shipped with the same card and the mode numbers depend purely | |
86 | on the VGA BIOS). | |
87 | ||
aa4d5203 | 88 | The modes displayed on the menu are partially sorted: The list starts with |
1da177e4 LT |
89 | the standard modes (80x25 and 80x50) followed by "special" modes (80x28 and |
90 | 80x43), local modes (if the local modes feature is enabled), VESA modes and | |
91 | finally SVGA modes for the auto-detected adapter. | |
92 | ||
aa4d5203 | 93 | If you are not happy with the mode list offered (e.g., if you think your card |
1da177e4 LT |
94 | is able to do more), you can enter "scan" instead of item number / mode ID. The |
95 | program will try to ask the BIOS for all possible video mode numbers and test | |
96 | what happens then. The screen will be probably flashing wildly for some time and | |
97 | strange noises will be heard from inside the monitor and so on and then, really | |
98 | all consistent video modes supported by your BIOS will appear (plus maybe some | |
aa4d5203 MCC |
99 | ``ghost modes``). If you are afraid this could damage your monitor, don't use |
100 | this function. | |
1da177e4 | 101 | |
aa4d5203 MCC |
102 | After scanning, the mode ordering is a bit different: the auto-detected SVGA |
103 | modes are not listed at all and the modes revealed by ``scan`` are shown before | |
1da177e4 LT |
104 | all VESA modes. |
105 | ||
aa4d5203 MCC |
106 | Mode IDs |
107 | ~~~~~~~~ | |
108 | ||
109 | Because of the complexity of all the video stuff, the video mode IDs | |
1da177e4 LT |
110 | used here are also a bit complex. A video mode ID is a 16-bit number usually |
111 | expressed in a hexadecimal notation (starting with "0x"). You can set a mode | |
112 | by entering its mode directly if you know it even if it isn't shown on the menu. | |
113 | ||
aa4d5203 | 114 | The ID numbers can be divided to those regions:: |
1da177e4 LT |
115 | |
116 | 0x0000 to 0x00ff - menu item references. 0x0000 is the first item. Don't use | |
117 | outside the menu as this can change from boot to boot (especially if you | |
aa4d5203 | 118 | have used the ``scan`` feature). |
1da177e4 LT |
119 | |
120 | 0x0100 to 0x017f - standard BIOS modes. The ID is a BIOS video mode number | |
121 | (as presented to INT 10, function 00) increased by 0x0100. | |
122 | ||
123 | 0x0200 to 0x08ff - VESA BIOS modes. The ID is a VESA mode ID increased by | |
124 | 0x0100. All VESA modes should be autodetected and shown on the menu. | |
125 | ||
126 | 0x0900 to 0x09ff - Video7 special modes. Set by calling INT 0x10, AX=0x6f05. | |
127 | (Usually 940=80x43, 941=132x25, 942=132x44, 943=80x60, 944=100x60, | |
128 | 945=132x28 for the standard Video7 BIOS) | |
129 | ||
130 | 0x0f00 to 0x0fff - special modes (they are set by various tricks -- usually | |
131 | by modifying one of the standard modes). Currently available: | |
132 | 0x0f00 standard 80x25, don't reset mode if already set (=FFFF) | |
133 | 0x0f01 standard with 8-point font: 80x43 on EGA, 80x50 on VGA | |
134 | 0x0f02 VGA 80x43 (VGA switched to 350 scanlines with a 8-point font) | |
135 | 0x0f03 VGA 80x28 (standard VGA scans, but 14-point font) | |
136 | 0x0f04 leave current video mode | |
137 | 0x0f05 VGA 80x30 (480 scans, 16-point font) | |
138 | 0x0f06 VGA 80x34 (480 scans, 14-point font) | |
139 | 0x0f07 VGA 80x60 (480 scans, 8-point font) | |
0cf9bb67 | 140 | 0x0f08 Graphics hack (see the VIDEO_GFX_HACK paragraph below) |
1da177e4 LT |
141 | |
142 | 0x1000 to 0x7fff - modes specified by resolution. The code has a "0xRRCC" | |
143 | form where RR is a number of rows and CC is a number of columns. | |
144 | E.g., 0x1950 corresponds to a 80x25 mode, 0x2b84 to 132x43 etc. | |
145 | This is the only fully portable way to refer to a non-standard mode, | |
146 | but it relies on the mode being found and displayed on the menu | |
147 | (remember that mode scanning is not done automatically). | |
148 | ||
149 | 0xff00 to 0xffff - aliases for backward compatibility: | |
150 | 0xffff equivalent to 0x0f00 (standard 80x25) | |
151 | 0xfffe equivalent to 0x0f01 (EGA 80x43 or VGA 80x50) | |
152 | ||
aa4d5203 | 153 | If you add 0x8000 to the mode ID, the program will try to recalculate |
1da177e4 LT |
154 | vertical display timing according to mode parameters, which can be used to |
155 | eliminate some annoying bugs of certain VGA BIOSes (usually those used for | |
156 | cards with S3 chipsets and old Cirrus Logic BIOSes) -- mainly extra lines at the | |
157 | end of the display. | |
158 | ||
aa4d5203 MCC |
159 | Options |
160 | ~~~~~~~ | |
161 | ||
0cf9bb67 RD |
162 | Build options for arch/x86/boot/* are selected by the kernel kconfig |
163 | utility and the kernel .config file. | |
164 | ||
165 | VIDEO_GFX_HACK - includes special hack for setting of graphics modes | |
166 | to be used later by special drivers. | |
1da177e4 LT |
167 | Allows to set _any_ BIOS mode including graphic ones and forcing specific |
168 | text screen resolution instead of peeking it from BIOS variables. Don't use | |
169 | unless you think you know what you're doing. To activate this setup, use | |
0cf9bb67 | 170 | mode number 0x0f08 (see the Mode IDs section above). |
1da177e4 | 171 | |
aa4d5203 MCC |
172 | Still doesn't work? |
173 | ~~~~~~~~~~~~~~~~~~~ | |
174 | ||
175 | When the mode detection doesn't work (e.g., the mode list is incorrect or | |
1da177e4 | 176 | the machine hangs instead of displaying the menu), try to switch off some of |
0cf9bb67 | 177 | the configuration options listed under "Options". If it fails, you can still use |
1da177e4 LT |
178 | your kernel with the video mode set directly via the kernel parameter. |
179 | ||
aa4d5203 | 180 | In either case, please send me a bug report containing what _exactly_ |
1da177e4 LT |
181 | happens and how do the configuration switches affect the behaviour of the bug. |
182 | ||
aa4d5203 | 183 | If you start Linux from M$-DOS, you might also use some DOS tools for |
1da177e4 LT |
184 | video mode setting. In this case, you must specify the 0x0f04 mode ("leave |
185 | current settings") to Linux, because if you don't and you use any non-standard | |
186 | mode, Linux will switch to 80x25 automatically. | |
187 | ||
aa4d5203 | 188 | If you set some extended mode and there's one or more extra lines on the |
1da177e4 LT |
189 | bottom of the display containing already scrolled-out text, your VGA BIOS |
190 | contains the most common video BIOS bug called "incorrect vertical display | |
191 | end setting". Adding 0x8000 to the mode ID might fix the problem. Unfortunately, | |
192 | this must be done manually -- no autodetection mechanisms are available. | |
193 | ||
aa4d5203 MCC |
194 | History |
195 | ~~~~~~~ | |
196 | ||
197 | =============== ================================================================ | |
1da177e4 LT |
198 | 1.0 (??-Nov-95) First version supporting all adapters supported by the old |
199 | setup.S + Cirrus Logic 54XX. Present in some 1.3.4? kernels | |
200 | and then removed due to instability on some machines. | |
201 | 2.0 (28-Jan-96) Rewritten from scratch. Cirrus Logic 64XX support added, almost | |
202 | everything is configurable, the VESA support should be much more | |
203 | stable, explicit mode numbering allowed, "scan" implemented etc. | |
204 | 2.1 (30-Jan-96) VESA modes moved to 0x200-0x3ff. Mode selection by resolution | |
205 | supported. Few bugs fixed. VESA modes are listed prior to | |
206 | modes supplied by SVGA autodetection as they are more reliable. | |
207 | CLGD autodetect works better. Doesn't depend on 80x25 being | |
208 | active when started. Scanning fixed. 80x43 (any VGA) added. | |
209 | Code cleaned up. | |
210 | 2.2 (01-Feb-96) EGA 80x43 fixed. VESA extended to 0x200-0x4ff (non-standard 02XX | |
211 | VESA modes work now). Display end bug workaround supported. | |
212 | Special modes renumbered to allow adding of the "recalculate" | |
213 | flag, 0xffff and 0xfffe became aliases instead of real IDs. | |
214 | Screen contents retained during mode changes. | |
215 | 2.3 (15-Mar-96) Changed to work with 1.3.74 kernel. | |
216 | 2.4 (18-Mar-96) Added patches by Hans Lermen fixing a memory overwrite problem | |
217 | with some boot loaders. Memory management rewritten to reflect | |
218 | these changes. Unfortunately, screen contents retaining works | |
219 | only with some loaders now. | |
220 | Added a Tseng 132x60 mode. | |
221 | 2.5 (19-Mar-96) Fixed a VESA mode scanning bug introduced in 2.4. | |
222 | 2.6 (25-Mar-96) Some VESA BIOS errors not reported -- it fixes error reports on | |
223 | several cards with broken VESA code (e.g., ATI VGA). | |
224 | 2.7 (09-Apr-96) - Accepted all VESA modes in range 0x100 to 0x7ff, because some | |
225 | cards use very strange mode numbers. | |
226 | - Added Realtek VGA modes (thanks to Gonzalo Tornaria). | |
227 | - Hardware testing order slightly changed, tests based on ROM | |
228 | contents done as first. | |
229 | - Added support for special Video7 mode switching functions | |
230 | (thanks to Tom Vander Aa). | |
231 | - Added 480-scanline modes (especially useful for notebooks, | |
232 | original version written by hhanemaa@cs.ruu.nl, patched by | |
233 | Jeff Chua, rewritten by me). | |
234 | - Screen store/restore fixed. | |
aa4d5203 | 235 | 2.8 (14-Apr-96) - Previous release was not compilable without CONFIG_VIDEO_SVGA. |
1da177e4 LT |
236 | - Better recognition of text modes during mode scan. |
237 | 2.9 (12-May-96) - Ignored VESA modes 0x80 - 0xff (more VESA BIOS bugs!) | |
aa4d5203 | 238 | 2.10(11-Nov-96) - The whole thing made optional. |
1da177e4 LT |
239 | - Added the CONFIG_VIDEO_400_HACK switch. |
240 | - Added the CONFIG_VIDEO_GFX_HACK switch. | |
241 | - Code cleanup. | |
aa4d5203 MCC |
242 | 2.11(03-May-97) - Yet another cleanup, now including also the documentation. |
243 | - Direct testing of SVGA adapters turned off by default, ``scan`` | |
1da177e4 LT |
244 | offered explicitly on the prompt line. |
245 | - Removed the doc section describing adding of new probing | |
246 | functions as I try to get rid of _all_ hardware probing here. | |
aa4d5203 MCC |
247 | 2.12(25-May-98) Added support for VESA frame buffer graphics. |
248 | 2.13(14-May-99) Minor documentation fixes. | |
249 | =============== ================================================================ |