]>
Commit | Line | Data |
---|---|---|
c483d489 BP |
1 | Frequently Asked Questions |
2 | ========================== | |
3 | ||
542cc9bb TG |
4 | Open vSwitch <http://openvswitch.org> |
5 | ||
3fc7dc18 JP |
6 | General |
7 | ------- | |
8 | ||
542cc9bb | 9 | ### Q: What is Open vSwitch? |
3fc7dc18 JP |
10 | |
11 | A: Open vSwitch is a production quality open source software switch | |
29089a54 RL |
12 | designed to be used as a vswitch in virtualized server |
13 | environments. A vswitch forwards traffic between different VMs on | |
14 | the same physical host and also forwards traffic between VMs and | |
15 | the physical network. Open vSwitch supports standard management | |
16 | interfaces (e.g. sFlow, NetFlow, IPFIX, RSPAN, CLI), and is open to | |
17 | programmatic extension and control using OpenFlow and the OVSDB | |
18 | management protocol. | |
3fc7dc18 JP |
19 | |
20 | Open vSwitch as designed to be compatible with modern switching | |
21 | chipsets. This means that it can be ported to existing high-fanout | |
22 | switches allowing the same flexible control of the physical | |
23 | infrastructure as the virtual infrastructure. It also means that | |
24 | Open vSwitch will be able to take advantage of on-NIC switching | |
25 | chipsets as their functionality matures. | |
26 | ||
542cc9bb | 27 | ### Q: What virtualization platforms can use Open vSwitch? |
3fc7dc18 JP |
28 | |
29 | A: Open vSwitch can currently run on any Linux-based virtualization | |
37418c86 | 30 | platform (kernel 2.6.32 and newer), including: KVM, VirtualBox, Xen, |
3fc7dc18 JP |
31 | Xen Cloud Platform, XenServer. As of Linux 3.3 it is part of the |
32 | mainline kernel. The bulk of the code is written in platform- | |
33 | independent C and is easily ported to other environments. We welcome | |
34 | inquires about integrating Open vSwitch with other virtualization | |
35 | platforms. | |
36 | ||
542cc9bb | 37 | ### Q: How can I try Open vSwitch? |
3fc7dc18 | 38 | |
7b287e99 JP |
39 | A: The Open vSwitch source code can be built on a Linux system. You can |
40 | build and experiment with Open vSwitch on any Linux machine. | |
41 | Packages for various Linux distributions are available on many | |
42 | platforms, including: Debian, Ubuntu, Fedora. | |
3fc7dc18 JP |
43 | |
44 | You may also download and run a virtualization platform that already | |
7b287e99 JP |
45 | has Open vSwitch integrated. For example, download a recent ISO for |
46 | XenServer or Xen Cloud Platform. Be aware that the version | |
47 | integrated with a particular platform may not be the most recent Open | |
48 | vSwitch release. | |
49 | ||
542cc9bb | 50 | ### Q: Does Open vSwitch only work on Linux? |
7b287e99 JP |
51 | |
52 | A: No, Open vSwitch has been ported to a number of different operating | |
53 | systems and hardware platforms. Most of the development work occurs | |
54 | on Linux, but the code should be portable to any POSIX system. We've | |
55 | seen Open vSwitch ported to a number of different platforms, | |
56 | including FreeBSD, Windows, and even non-POSIX embedded systems. | |
57 | ||
58 | By definition, the Open vSwitch Linux kernel module only works on | |
59 | Linux and will provide the highest performance. However, a userspace | |
60 | datapath is available that should be very portable. | |
61 | ||
542cc9bb | 62 | ### Q: What's involved with porting Open vSwitch to a new platform or switching ASIC? |
7b287e99 | 63 | |
9feb1017 | 64 | A: The [PORTING.md] document describes how one would go about |
542cc9bb | 65 | porting Open vSwitch to a new operating system or hardware platform. |
3fc7dc18 | 66 | |
542cc9bb | 67 | ### Q: Why would I use Open vSwitch instead of the Linux bridge? |
3fc7dc18 JP |
68 | |
69 | A: Open vSwitch is specially designed to make it easier to manage VM | |
7b287e99 | 70 | network configuration and monitor state spread across many physical |
542cc9bb | 71 | hosts in dynamic virtualized environments. Please see |
9feb1017 TG |
72 | [WHY-OVS.md] for a more detailed description of how Open vSwitch |
73 | relates to the Linux Bridge. | |
3fc7dc18 | 74 | |
542cc9bb | 75 | ### Q: How is Open vSwitch related to distributed virtual switches like the VMware vNetwork distributed switch or the Cisco Nexus 1000V? |
3fc7dc18 JP |
76 | |
77 | A: Distributed vswitch applications (e.g., VMware vNetwork distributed | |
78 | switch, Cisco Nexus 1000V) provide a centralized way to configure and | |
79 | monitor the network state of VMs that are spread across many physical | |
80 | hosts. Open vSwitch is not a distributed vswitch itself, rather it | |
81 | runs on each physical host and supports remote management in a way | |
82 | that makes it easier for developers of virtualization/cloud | |
83 | management platforms to offer distributed vswitch capabilities. | |
84 | ||
85 | To aid in distribution, Open vSwitch provides two open protocols that | |
86 | are specially designed for remote management in virtualized network | |
87 | environments: OpenFlow, which exposes flow-based forwarding state, | |
88 | and the OVSDB management protocol, which exposes switch port state. | |
89 | In addition to the switch implementation itself, Open vSwitch | |
1d5aaa61 BP |
90 | includes tools (ovs-ofctl, ovs-vsctl) that developers can script and |
91 | extend to provide distributed vswitch capabilities that are closely | |
92 | integrated with their virtualization management platform. | |
3fc7dc18 | 93 | |
542cc9bb | 94 | ### Q: Why doesn't Open vSwitch support distribution? |
3fc7dc18 JP |
95 | |
96 | A: Open vSwitch is intended to be a useful component for building | |
97 | flexible network infrastructure. There are many different approaches | |
98 | to distribution which balance trade-offs between simplicity, | |
99 | scalability, hardware compatibility, convergence times, logical | |
100 | forwarding model, etc. The goal of Open vSwitch is to be able to | |
101 | support all as a primitive building block rather than choose a | |
102 | particular point in the distributed design space. | |
103 | ||
542cc9bb | 104 | ### Q: How can I contribute to the Open vSwitch Community? |
3fc7dc18 JP |
105 | |
106 | A: You can start by joining the mailing lists and helping to answer | |
7b287e99 JP |
107 | questions. You can also suggest improvements to documentation. If |
108 | you have a feature or bug you would like to work on, send a mail to | |
109 | one of the mailing lists: | |
110 | ||
542cc9bb | 111 | http://openvswitch.org/mlists/ |
7b287e99 | 112 | |
d4763d1d JP |
113 | ### Q: Why can I no longer connect to my OpenFlow controller or OVSDB |
114 | manager? | |
115 | ||
116 | A: Starting in OVS 2.4, we switched the default ports to the | |
117 | IANA-specified port numbers for OpenFlow (6633->6653) and OVSDB | |
118 | (6632->6640). We recommend using these port numbers, but if you | |
119 | cannot, all the programs allow overriding the default port. See the | |
120 | appropriate man page. | |
121 | ||
7b287e99 | 122 | |
7b287e99 JP |
123 | Releases |
124 | -------- | |
125 | ||
542cc9bb | 126 | ### Q: What does it mean for an Open vSwitch release to be LTS (long-term support)? |
3fc7dc18 | 127 | |
7b287e99 JP |
128 | A: All official releases have been through a comprehensive testing |
129 | process and are suitable for production use. Planned releases will | |
130 | occur several times a year. If a significant bug is identified in an | |
131 | LTS release, we will provide an updated release that includes the | |
132 | fix. Releases that are not LTS may not be fixed and may just be | |
133 | supplanted by the next major release. The current LTS release is | |
49b507d9 | 134 | 2.3.x. |
7b287e99 | 135 | |
542cc9bb | 136 | ### Q: What Linux kernel versions does each Open vSwitch release work with? |
314e60e1 BP |
137 | |
138 | A: The following table lists the Linux kernel versions against which the | |
139 | given versions of the Open vSwitch kernel module will successfully | |
140 | build. The Linux kernel versions are upstream kernel versions, so | |
a01b5c51 BP |
141 | Linux kernels modified from the upstream sources may not build in |
142 | some cases even if they are based on a supported version. This is | |
143 | most notably true of Red Hat Enterprise Linux (RHEL) kernels, which | |
144 | are extensively modified from upstream. | |
314e60e1 | 145 | |
542cc9bb TG |
146 | | Open vSwitch | Linux kernel |
147 | |:------------:|:-------------: | |
148 | | 1.4.x | 2.6.18 to 3.2 | |
149 | | 1.5.x | 2.6.18 to 3.2 | |
150 | | 1.6.x | 2.6.18 to 3.2 | |
151 | | 1.7.x | 2.6.18 to 3.3 | |
152 | | 1.8.x | 2.6.18 to 3.4 | |
153 | | 1.9.x | 2.6.18 to 3.8 | |
154 | | 1.10.x | 2.6.18 to 3.8 | |
155 | | 1.11.x | 2.6.18 to 3.8 | |
156 | | 2.0.x | 2.6.32 to 3.10 | |
157 | | 2.1.x | 2.6.32 to 3.11 | |
158 | | 2.3.x | 2.6.32 to 3.14 | |
3afcde43 | 159 | | 2.4.x | 2.6.32 to 4.0 |
314e60e1 BP |
160 | |
161 | Open vSwitch userspace should also work with the Linux kernel module | |
162 | built into Linux 3.3 and later. | |
163 | ||
164 | Open vSwitch userspace is not sensitive to the Linux kernel version. | |
37418c86 | 165 | It should build against almost any kernel, certainly against 2.6.32 |
314e60e1 BP |
166 | and later. |
167 | ||
542cc9bb | 168 | ### Q: I get an error like this when I configure Open vSwitch: |
29089a54 | 169 | |
a7ae9380 BP |
170 | configure: error: Linux kernel in <dir> is version <x>, but |
171 | version newer than <y> is not supported (please refer to the | |
172 | FAQ for advice) | |
29089a54 | 173 | |
a7ae9380 | 174 | What should I do? |
33cec590 | 175 | |
fcc369bc BP |
176 | A: You have the following options: |
177 | ||
178 | - Use the Linux kernel module supplied with the kernel that you are | |
179 | using. (See also the following FAQ.) | |
180 | ||
181 | - If there is a newer released version of Open vSwitch, consider | |
182 | building that one, because it may support the kernel that you are | |
183 | building against. (To find out, consult the table in the | |
184 | previous FAQ.) | |
185 | ||
186 | - The Open vSwitch "master" branch may support the kernel that you | |
187 | are using, so consider building the kernel module from "master". | |
188 | ||
189 | All versions of Open vSwitch userspace are compatible with all | |
190 | versions of the Open vSwitch kernel module, so you do not have to | |
191 | use the kernel module from one source along with the userspace | |
192 | programs from the same source. | |
33cec590 | 193 | |
542cc9bb | 194 | ### Q: What features are not available in the Open vSwitch kernel datapath that ships as part of the upstream Linux kernel? |
7b287e99 | 195 | |
9c333bff JG |
196 | A: The kernel module in upstream Linux does not include support for |
197 | LISP. Work is in progress to add support for LISP to the upstream | |
198 | Linux version of the Open vSwitch kernel module. For now, if you | |
199 | need this feature, use the kernel module from the Open vSwitch | |
0a740f48 EJ |
200 | distribution instead of the upstream Linux kernel module. |
201 | ||
9c333bff JG |
202 | Certain features require kernel support to function or to have |
203 | reasonable performance. If the ovs-vswitchd log file indicates that | |
204 | a feature is not supported, consider upgrading to a newer upstream | |
205 | Linux release or using the kernel module paired with the userspace | |
206 | distribution. | |
6302c641 | 207 | |
542cc9bb | 208 | ### Q: Why do tunnels not work when using a kernel module other than the one packaged with Open vSwitch? |
6814c630 JG |
209 | |
210 | A: Support for tunnels was added to the upstream Linux kernel module | |
211 | after the rest of Open vSwitch. As a result, some kernels may contain | |
212 | support for Open vSwitch but not tunnels. The minimum kernel version | |
213 | that supports each tunnel protocol is: | |
214 | ||
542cc9bb TG |
215 | | Protocol | Linux Kernel |
216 | |:--------:|:-------------: | |
217 | | GRE | 3.11 | |
218 | | VXLAN | 3.12 | |
4752cc0c | 219 | | Geneve | 3.18 |
542cc9bb | 220 | | LISP | <not upstream> |
4237026e | 221 | | STT | <not upstream> |
6814c630 JG |
222 | |
223 | If you are using a version of the kernel that is older than the one | |
224 | listed above, it is still possible to use that tunnel protocol. However, | |
225 | you must compile and install the kernel module included with the Open | |
226 | vSwitch distribution rather than the one on your machine. If problems | |
227 | persist after doing this, check to make sure that the module that is | |
228 | loaded is the one you expect. | |
229 | ||
4752cc0c JG |
230 | ### Q: Why are UDP tunnel checksums not computed for VXLAN or Geneve? |
231 | ||
232 | A: Generating outer UDP checksums requires kernel support that was not | |
233 | part of the initial implementation of these protocols. If using the | |
234 | upstream Linux Open vSwitch module, you must use kernel 4.0 or | |
235 | newer. The out-of-tree modules from Open vSwitch release 2.4 and later | |
236 | support UDP checksums. | |
237 | ||
542cc9bb | 238 | ### Q: What features are not available when using the userspace datapath? |
7b287e99 | 239 | |
0a740f48 | 240 | A: Tunnel virtual ports are not supported, as described in the |
7b287e99 JP |
241 | previous answer. It is also not possible to use queue-related |
242 | actions. On Linux kernels before 2.6.39, maximum-sized VLAN packets | |
243 | may not be transmitted. | |
3fc7dc18 | 244 | |
542cc9bb | 245 | ### Q: What Linux kernel versions does IPFIX flow monitoring work with? |
a7ae9380 | 246 | |
b809f733 BP |
247 | A: IPFIX flow monitoring requires the Linux kernel module from Linux |
248 | 3.10 or later, or the out-of-tree module from Open vSwitch version | |
249 | 1.10.90 or later. | |
a7ae9380 | 250 | |
542cc9bb | 251 | ### Q: Should userspace or kernel be upgraded first to minimize downtime? |
a7ae9380 BP |
252 | |
253 | In general, the Open vSwitch userspace should be used with the | |
254 | kernel version included in the same release or with the version | |
255 | from upstream Linux. However, when upgrading between two releases | |
256 | of Open vSwitch it is best to migrate userspace first to reduce | |
257 | the possibility of incompatibilities. | |
258 | ||
542cc9bb | 259 | ### Q: What happened to the bridge compatibility feature? |
900dc97c BP |
260 | |
261 | A: Bridge compatibility was a feature of Open vSwitch 1.9 and earlier. | |
262 | When it was enabled, Open vSwitch imitated the interface of the | |
263 | Linux kernel "bridge" module. This allowed users to drop Open | |
264 | vSwitch into environments designed to use the Linux kernel bridge | |
265 | module without adapting the environment to use Open vSwitch. | |
266 | ||
267 | Open vSwitch 1.10 and later do not support bridge compatibility. | |
268 | The feature was dropped because version 1.10 adopted a new internal | |
269 | architecture that made bridge compatibility difficult to maintain. | |
270 | Now that many environments use OVS directly, it would be rarely | |
271 | useful in any case. | |
272 | ||
273 | To use bridge compatibility, install OVS 1.9 or earlier, including | |
274 | the accompanying kernel modules (both the main and bridge | |
275 | compatibility modules), following the instructions that come with | |
276 | the release. Be sure to start the ovs-brcompatd daemon. | |
277 | ||
3fc7dc18 | 278 | |
79aa9fd0 BP |
279 | Terminology |
280 | ----------- | |
281 | ||
542cc9bb | 282 | ### Q: I thought Open vSwitch was a virtual Ethernet switch, but the documentation keeps talking about bridges. What's a bridge? |
79aa9fd0 BP |
283 | |
284 | A: In networking, the terms "bridge" and "switch" are synonyms. Open | |
285 | vSwitch implements an Ethernet switch, which means that it is also | |
286 | an Ethernet bridge. | |
287 | ||
542cc9bb | 288 | ### Q: What's a VLAN? |
79aa9fd0 BP |
289 | |
290 | A: See the "VLAN" section below. | |
291 | ||
292 | ||
717e7c8d BP |
293 | Basic Configuration |
294 | ------------------- | |
295 | ||
542cc9bb | 296 | ### Q: How do I configure a port as an access port? |
717e7c8d BP |
297 | |
298 | A: Add "tag=VLAN" to your "ovs-vsctl add-port" command. For example, | |
299 | the following commands configure br0 with eth0 as a trunk port (the | |
300 | default) and tap0 as an access port for VLAN 9: | |
301 | ||
302 | ovs-vsctl add-br br0 | |
303 | ovs-vsctl add-port br0 eth0 | |
304 | ovs-vsctl add-port br0 tap0 tag=9 | |
305 | ||
306 | If you want to configure an already added port as an access port, | |
307 | use "ovs-vsctl set", e.g.: | |
308 | ||
309 | ovs-vsctl set port tap0 tag=9 | |
310 | ||
542cc9bb | 311 | ### Q: How do I configure a port as a SPAN port, that is, enable mirroring of all traffic to that port? |
717e7c8d BP |
312 | |
313 | A: The following commands configure br0 with eth0 and tap0 as trunk | |
314 | ports. All traffic coming in or going out on eth0 or tap0 is also | |
315 | mirrored to tap1; any traffic arriving on tap1 is dropped: | |
316 | ||
317 | ovs-vsctl add-br br0 | |
318 | ovs-vsctl add-port br0 eth0 | |
319 | ovs-vsctl add-port br0 tap0 | |
320 | ovs-vsctl add-port br0 tap1 \ | |
321 | -- --id=@p get port tap1 \ | |
0dc8b8c2 YT |
322 | -- --id=@m create mirror name=m0 select-all=true output-port=@p \ |
323 | -- set bridge br0 mirrors=@m | |
717e7c8d BP |
324 | |
325 | To later disable mirroring, run: | |
326 | ||
327 | ovs-vsctl clear bridge br0 mirrors | |
328 | ||
542cc9bb | 329 | ### Q: Does Open vSwitch support configuring a port in promiscuous mode? |
e253f732 BP |
330 | |
331 | A: Yes. How you configure it depends on what you mean by "promiscuous | |
332 | mode": | |
333 | ||
542cc9bb TG |
334 | - Conventionally, "promiscuous mode" is a feature of a network |
335 | interface card. Ordinarily, a NIC passes to the CPU only the | |
336 | packets actually destined to its host machine. It discards | |
337 | the rest to avoid wasting memory and CPU cycles. When | |
338 | promiscuous mode is enabled, however, it passes every packet | |
339 | to the CPU. On an old-style shared-media or hub-based | |
340 | network, this allows the host to spy on all packets on the | |
341 | network. But in the switched networks that are almost | |
342 | everywhere these days, promiscuous mode doesn't have much | |
343 | effect, because few packets not destined to a host are | |
344 | delivered to the host's NIC. | |
345 | ||
346 | This form of promiscuous mode is configured in the guest OS of | |
347 | the VMs on your bridge, e.g. with "ifconfig". | |
348 | ||
349 | - The VMware vSwitch uses a different definition of "promiscuous | |
350 | mode". When you configure promiscuous mode on a VMware vNIC, | |
351 | the vSwitch sends a copy of every packet received by the | |
352 | vSwitch to that vNIC. That has a much bigger effect than just | |
353 | enabling promiscuous mode in a guest OS. Rather than getting | |
354 | a few stray packets for which the switch does not yet know the | |
355 | correct destination, the vNIC gets every packet. The effect | |
356 | is similar to replacing the vSwitch by a virtual hub. | |
357 | ||
358 | This "promiscuous mode" is what switches normally call "port | |
359 | mirroring" or "SPAN". For information on how to configure | |
360 | SPAN, see "How do I configure a port as a SPAN port, that is, | |
361 | enable mirroring of all traffic to that port?" | |
362 | ||
77c180ce BM |
363 | ### Q: How do I configure a DPDK port as an access port? |
364 | ||
365 | A: Firstly, you must have a DPDK-enabled version of Open vSwitch. | |
366 | ||
367 | If your version is DPDK-enabled it will support the --dpdk | |
368 | argument on the command line and will display lines with | |
369 | "EAL:..." during startup when --dpdk is supplied. | |
370 | ||
371 | Secondly, when adding a DPDK port, unlike a system port, the | |
372 | type for the interface must be specified. For example; | |
373 | ||
374 | ovs-vsctl add-br br0 | |
375 | ovs-vsctl add-port br0 dpdk0 -- set Interface dpdk0 type=dpdk | |
376 | ||
377 | Finally, it is required that DPDK port names begin with 'dpdk'. | |
378 | ||
379 | See [INSTALL.DPDK.md] for more information on enabling and using DPDK with | |
380 | Open vSwitch. | |
381 | ||
542cc9bb | 382 | ### Q: How do I configure a VLAN as an RSPAN VLAN, that is, enable mirroring of all traffic to that VLAN? |
717e7c8d BP |
383 | |
384 | A: The following commands configure br0 with eth0 as a trunk port and | |
385 | tap0 as an access port for VLAN 10. All traffic coming in or going | |
386 | out on tap0, as well as traffic coming in or going out on eth0 in | |
387 | VLAN 10, is also mirrored to VLAN 15 on eth0. The original tag for | |
388 | VLAN 10, in cases where one is present, is dropped as part of | |
389 | mirroring: | |
390 | ||
391 | ovs-vsctl add-br br0 | |
392 | ovs-vsctl add-port br0 eth0 | |
393 | ovs-vsctl add-port br0 tap0 tag=10 | |
394 | ovs-vsctl \ | |
0dc8b8c2 | 395 | -- --id=@m create mirror name=m0 select-all=true select-vlan=10 \ |
717e7c8d | 396 | output-vlan=15 \ |
0dc8b8c2 | 397 | -- set bridge br0 mirrors=@m |
717e7c8d BP |
398 | |
399 | To later disable mirroring, run: | |
400 | ||
401 | ovs-vsctl clear bridge br0 mirrors | |
402 | ||
403 | Mirroring to a VLAN can disrupt a network that contains unmanaged | |
404 | switches. See ovs-vswitchd.conf.db(5) for details. Mirroring to a | |
405 | GRE tunnel has fewer caveats than mirroring to a VLAN and should | |
406 | generally be preferred. | |
407 | ||
542cc9bb | 408 | ### Q: Can I mirror more than one input VLAN to an RSPAN VLAN? |
717e7c8d BP |
409 | |
410 | A: Yes, but mirroring to a VLAN strips the original VLAN tag in favor | |
411 | of the specified output-vlan. This loss of information may make | |
412 | the mirrored traffic too hard to interpret. | |
413 | ||
414 | To mirror multiple VLANs, use the commands above, but specify a | |
415 | comma-separated list of VLANs as the value for select-vlan. To | |
416 | mirror every VLAN, use the commands above, but omit select-vlan and | |
417 | its value entirely. | |
418 | ||
419 | When a packet arrives on a VLAN that is used as a mirror output | |
420 | VLAN, the mirror is disregarded. Instead, in standalone mode, OVS | |
421 | floods the packet across all the ports for which the mirror output | |
422 | VLAN is configured. (If an OpenFlow controller is in use, then it | |
423 | can override this behavior through the flow table.) If OVS is used | |
424 | as an intermediate switch, rather than an edge switch, this ensures | |
425 | that the RSPAN traffic is distributed through the network. | |
426 | ||
427 | Mirroring to a VLAN can disrupt a network that contains unmanaged | |
428 | switches. See ovs-vswitchd.conf.db(5) for details. Mirroring to a | |
429 | GRE tunnel has fewer caveats than mirroring to a VLAN and should | |
430 | generally be preferred. | |
431 | ||
542cc9bb | 432 | ### Q: How do I configure mirroring of all traffic to a GRE tunnel? |
717e7c8d BP |
433 | |
434 | A: The following commands configure br0 with eth0 and tap0 as trunk | |
435 | ports. All traffic coming in or going out on eth0 or tap0 is also | |
436 | mirrored to gre0, a GRE tunnel to the remote host 192.168.1.10; any | |
437 | traffic arriving on gre0 is dropped: | |
438 | ||
439 | ovs-vsctl add-br br0 | |
440 | ovs-vsctl add-port br0 eth0 | |
441 | ovs-vsctl add-port br0 tap0 | |
442 | ovs-vsctl add-port br0 gre0 \ | |
443 | -- set interface gre0 type=gre options:remote_ip=192.168.1.10 \ | |
444 | -- --id=@p get port gre0 \ | |
0dc8b8c2 YT |
445 | -- --id=@m create mirror name=m0 select-all=true output-port=@p \ |
446 | -- set bridge br0 mirrors=@m | |
717e7c8d BP |
447 | |
448 | To later disable mirroring and destroy the GRE tunnel: | |
449 | ||
450 | ovs-vsctl clear bridge br0 mirrors | |
451 | ovs-vcstl del-port br0 gre0 | |
452 | ||
542cc9bb | 453 | ### Q: Does Open vSwitch support ERSPAN? |
717e7c8d BP |
454 | |
455 | A: No. ERSPAN is an undocumented proprietary protocol. As an | |
456 | alternative, Open vSwitch supports mirroring to a GRE tunnel (see | |
457 | above). | |
458 | ||
542cc9bb | 459 | ### Q: How do I connect two bridges? |
1ab9712b BP |
460 | |
461 | A: First, why do you want to do this? Two connected bridges are not | |
462 | much different from a single bridge, so you might as well just have | |
463 | a single bridge with all your ports on it. | |
464 | ||
465 | If you still want to connect two bridges, you can use a pair of | |
466 | patch ports. The following example creates bridges br0 and br1, | |
467 | adds eth0 and tap0 to br0, adds tap1 to br1, and then connects br0 | |
468 | and br1 with a pair of patch ports. | |
469 | ||
470 | ovs-vsctl add-br br0 | |
471 | ovs-vsctl add-port br0 eth0 | |
472 | ovs-vsctl add-port br0 tap0 | |
473 | ovs-vsctl add-br br1 | |
474 | ovs-vsctl add-port br1 tap1 | |
475 | ovs-vsctl \ | |
476 | -- add-port br0 patch0 \ | |
477 | -- set interface patch0 type=patch options:peer=patch1 \ | |
478 | -- add-port br1 patch1 \ | |
479 | -- set interface patch1 type=patch options:peer=patch0 | |
480 | ||
481 | Bridges connected with patch ports are much like a single bridge. | |
482 | For instance, if the example above also added eth1 to br1, and both | |
483 | eth0 and eth1 happened to be connected to the same next-hop switch, | |
484 | then you could loop your network just as you would if you added | |
485 | eth0 and eth1 to the same bridge (see the "Configuration Problems" | |
486 | section below for more information). | |
487 | ||
488 | If you are using Open vSwitch 1.9 or an earlier version, then you | |
489 | need to be using the kernel module bundled with Open vSwitch rather | |
490 | than the one that is integrated into Linux 3.3 and later, because | |
491 | Open vSwitch 1.9 and earlier versions need kernel support for patch | |
492 | ports. This also means that in Open vSwitch 1.9 and earlier, patch | |
493 | ports will not work with the userspace datapath, only with the | |
494 | kernel module. | |
495 | ||
542cc9bb | 496 | ### Q: How do I configure a bridge without an OpenFlow local port? (Local port in the sense of OFPP_LOCAL) |
5c9c1105 YT |
497 | |
498 | A: Open vSwitch does not support such a configuration. | |
499 | Bridges always have their local ports. | |
500 | ||
1a274bfe BP |
501 | |
502 | Implementation Details | |
503 | ---------------------- | |
504 | ||
542cc9bb | 505 | ### Q: I hear OVS has a couple of kinds of flows. Can you tell me about them? |
a70fc0cf JP |
506 | |
507 | A: Open vSwitch uses different kinds of flows for different purposes: | |
508 | ||
542cc9bb TG |
509 | - OpenFlow flows are the most important kind of flow. OpenFlow |
510 | controllers use these flows to define a switch's policy. | |
511 | OpenFlow flows support wildcards, priorities, and multiple | |
512 | tables. | |
513 | ||
514 | When in-band control is in use, Open vSwitch sets up a few | |
515 | "hidden" flows, with priority higher than a controller or the | |
516 | user can configure, that are not visible via OpenFlow. (See | |
517 | the "Controller" section of the FAQ for more information | |
518 | about hidden flows.) | |
519 | ||
520 | - The Open vSwitch software switch implementation uses a second | |
521 | kind of flow internally. These flows, called "datapath" or | |
522 | "kernel" flows, do not support priorities and comprise only a | |
523 | single table, which makes them suitable for caching. (Like | |
524 | OpenFlow flows, datapath flows do support wildcarding, in Open | |
525 | vSwitch 1.11 and later.) OpenFlow flows and datapath flows | |
526 | also support different actions and number ports differently. | |
527 | ||
528 | Datapath flows are an implementation detail that is subject to | |
529 | change in future versions of Open vSwitch. Even with the | |
530 | current version of Open vSwitch, hardware switch | |
531 | implementations do not necessarily use this architecture. | |
a70fc0cf | 532 | |
1a274bfe BP |
533 | Users and controllers directly control only the OpenFlow flow |
534 | table. Open vSwitch manages the datapath flow table itself, so | |
535 | users should not normally be concerned with it. | |
536 | ||
542cc9bb | 537 | ### Q: Why are there so many different ways to dump flows? |
1a274bfe BP |
538 | |
539 | A: Open vSwitch has two kinds of flows (see the previous question), so | |
540 | it has commands with different purposes for dumping each kind of | |
541 | flow: | |
a70fc0cf | 542 | |
542cc9bb TG |
543 | - `ovs-ofctl dump-flows <br>` dumps OpenFlow flows, excluding |
544 | hidden flows. This is the most commonly useful form of flow | |
545 | dump. (Unlike the other commands, this should work with any | |
546 | OpenFlow switch, not just Open vSwitch.) | |
a70fc0cf | 547 | |
542cc9bb TG |
548 | - `ovs-appctl bridge/dump-flows <br>` dumps OpenFlow flows, |
549 | including hidden flows. This is occasionally useful for | |
550 | troubleshooting suspected issues with in-band control. | |
a70fc0cf | 551 | |
542cc9bb TG |
552 | - `ovs-dpctl dump-flows [dp]` dumps the datapath flow table |
553 | entries for a Linux kernel-based datapath. In Open vSwitch | |
554 | 1.10 and later, ovs-vswitchd merges multiple switches into a | |
555 | single datapath, so it will show all the flows on all your | |
556 | kernel-based switches. This command can occasionally be | |
557 | useful for debugging. | |
a70fc0cf | 558 | |
542cc9bb TG |
559 | - `ovs-appctl dpif/dump-flows <br>`, new in Open vSwitch 1.10, |
560 | dumps datapath flows for only the specified bridge, regardless | |
561 | of the type. | |
a70fc0cf | 562 | |
542cc9bb | 563 | ### Q: How does multicast snooping works with VLANs? |
c81f359b FL |
564 | |
565 | A: Open vSwitch maintains snooping tables for each VLAN. | |
566 | ||
717e7c8d | 567 | |
bcb8bde4 JR |
568 | Performance |
569 | ----------- | |
570 | ||
542cc9bb | 571 | ### Q: I just upgraded and I see a performance drop. Why? |
bcb8bde4 JR |
572 | |
573 | A: The OVS kernel datapath may have been updated to a newer version than | |
574 | the OVS userspace components. Sometimes new versions of OVS kernel | |
575 | module add functionality that is backwards compatible with older | |
576 | userspace components but may cause a drop in performance with them. | |
577 | Especially, if a kernel module from OVS 2.1 or newer is paired with | |
578 | OVS userspace 1.10 or older, there will be a performance drop for | |
579 | TCP traffic. | |
580 | ||
581 | Updating the OVS userspace components to the latest released | |
582 | version should fix the performance degradation. | |
583 | ||
584 | To get the best possible performance and functionality, it is | |
585 | recommended to pair the same versions of the kernel module and OVS | |
586 | userspace. | |
587 | ||
588 | ||
c483d489 BP |
589 | Configuration Problems |
590 | ---------------------- | |
591 | ||
542cc9bb | 592 | ### Q: I created a bridge and added my Ethernet port to it, using commands |
c483d489 BP |
593 | like these: |
594 | ||
595 | ovs-vsctl add-br br0 | |
596 | ovs-vsctl add-port br0 eth0 | |
597 | ||
598 | and as soon as I ran the "add-port" command I lost all connectivity | |
599 | through eth0. Help! | |
600 | ||
601 | A: A physical Ethernet device that is part of an Open vSwitch bridge | |
602 | should not have an IP address. If one does, then that IP address | |
603 | will not be fully functional. | |
604 | ||
605 | You can restore functionality by moving the IP address to an Open | |
606 | vSwitch "internal" device, such as the network device named after | |
607 | the bridge itself. For example, assuming that eth0's IP address is | |
608 | 192.168.128.5, you could run the commands below to fix up the | |
609 | situation: | |
610 | ||
611 | ifconfig eth0 0.0.0.0 | |
612 | ifconfig br0 192.168.128.5 | |
613 | ||
614 | (If your only connection to the machine running OVS is through the | |
615 | IP address in question, then you would want to run all of these | |
616 | commands on a single command line, or put them into a script.) If | |
617 | there were any additional routes assigned to eth0, then you would | |
618 | also want to use commands to adjust these routes to go through br0. | |
619 | ||
620 | If you use DHCP to obtain an IP address, then you should kill the | |
621 | DHCP client that was listening on the physical Ethernet interface | |
622 | (e.g. eth0) and start one listening on the internal interface | |
623 | (e.g. br0). You might still need to manually clear the IP address | |
624 | from the physical interface (e.g. with "ifconfig eth0 0.0.0.0"). | |
625 | ||
626 | There is no compelling reason why Open vSwitch must work this way. | |
627 | However, this is the way that the Linux kernel bridge module has | |
628 | always worked, so it's a model that those accustomed to Linux | |
629 | bridging are already used to. Also, the model that most people | |
630 | expect is not implementable without kernel changes on all the | |
631 | versions of Linux that Open vSwitch supports. | |
632 | ||
633 | By the way, this issue is not specific to physical Ethernet | |
c7b0cfd3 | 634 | devices. It applies to all network devices except Open vSwitch |
c483d489 BP |
635 | "internal" devices. |
636 | ||
542cc9bb TG |
637 | ### Q: I created a bridge and added a couple of Ethernet ports to it, |
638 | ### using commands like these: | |
c483d489 BP |
639 | |
640 | ovs-vsctl add-br br0 | |
641 | ovs-vsctl add-port br0 eth0 | |
642 | ovs-vsctl add-port br0 eth1 | |
643 | ||
644 | and now my network seems to have melted: connectivity is unreliable | |
645 | (even connectivity that doesn't go through Open vSwitch), all the | |
629a6b48 BP |
646 | LEDs on my physical switches are blinking, wireshark shows |
647 | duplicated packets, and CPU usage is very high. | |
c483d489 BP |
648 | |
649 | A: More than likely, you've looped your network. Probably, eth0 and | |
650 | eth1 are connected to the same physical Ethernet switch. This | |
651 | yields a scenario where OVS receives a broadcast packet on eth0 and | |
652 | sends it out on eth1, then the physical switch connected to eth1 | |
653 | sends the packet back on eth0, and so on forever. More complicated | |
654 | scenarios, involving a loop through multiple switches, are possible | |
655 | too. | |
656 | ||
657 | The solution depends on what you are trying to do: | |
658 | ||
542cc9bb TG |
659 | - If you added eth0 and eth1 to get higher bandwidth or higher |
660 | reliability between OVS and your physical Ethernet switch, | |
661 | use a bond. The following commands create br0 and then add | |
662 | eth0 and eth1 as a bond: | |
c483d489 | 663 | |
542cc9bb TG |
664 | ovs-vsctl add-br br0 |
665 | ovs-vsctl add-bond br0 bond0 eth0 eth1 | |
c483d489 | 666 | |
542cc9bb TG |
667 | Bonds have tons of configuration options. Please read the |
668 | documentation on the Port table in ovs-vswitchd.conf.db(5) | |
669 | for all the details. | |
c483d489 | 670 | |
77c180ce BM |
671 | Configuration for DPDK-enabled interfaces is slightly less |
672 | straightforward: see [INSTALL.DPDK.md]. | |
673 | ||
542cc9bb TG |
674 | - Perhaps you don't actually need eth0 and eth1 to be on the |
675 | same bridge. For example, if you simply want to be able to | |
676 | connect each of them to virtual machines, then you can put | |
677 | each of them on a bridge of its own: | |
c483d489 | 678 | |
542cc9bb TG |
679 | ovs-vsctl add-br br0 |
680 | ovs-vsctl add-port br0 eth0 | |
c483d489 | 681 | |
542cc9bb TG |
682 | ovs-vsctl add-br br1 |
683 | ovs-vsctl add-port br1 eth1 | |
c483d489 | 684 | |
542cc9bb TG |
685 | and then connect VMs to br0 and br1. (A potential |
686 | disadvantage is that traffic cannot directly pass between br0 | |
687 | and br1. Instead, it will go out eth0 and come back in eth1, | |
688 | or vice versa.) | |
c483d489 | 689 | |
542cc9bb TG |
690 | - If you have a redundant or complex network topology and you |
691 | want to prevent loops, turn on spanning tree protocol (STP). | |
692 | The following commands create br0, enable STP, and add eth0 | |
693 | and eth1 to the bridge. The order is important because you | |
694 | don't want have to have a loop in your network even | |
695 | transiently: | |
c483d489 | 696 | |
542cc9bb TG |
697 | ovs-vsctl add-br br0 |
698 | ovs-vsctl set bridge br0 stp_enable=true | |
699 | ovs-vsctl add-port br0 eth0 | |
700 | ovs-vsctl add-port br0 eth1 | |
c483d489 | 701 | |
542cc9bb TG |
702 | The Open vSwitch implementation of STP is not well tested. |
703 | Please report any bugs you observe, but if you'd rather avoid | |
704 | acting as a beta tester then another option might be your | |
705 | best shot. | |
c483d489 | 706 | |
542cc9bb | 707 | ### Q: I can't seem to use Open vSwitch in a wireless network. |
c483d489 BP |
708 | |
709 | A: Wireless base stations generally only allow packets with the source | |
710 | MAC address of NIC that completed the initial handshake. | |
711 | Therefore, without MAC rewriting, only a single device can | |
712 | communicate over a single wireless link. | |
713 | ||
714 | This isn't specific to Open vSwitch, it's enforced by the access | |
715 | point, so the same problems will show up with the Linux bridge or | |
716 | any other way to do bridging. | |
717 | ||
542cc9bb | 718 | ### Q: I can't seem to add my PPP interface to an Open vSwitch bridge. |
8748ec7b BP |
719 | |
720 | A: PPP most commonly carries IP packets, but Open vSwitch works only | |
721 | with Ethernet frames. The correct way to interface PPP to an | |
722 | Ethernet network is usually to use routing instead of switching. | |
723 | ||
542cc9bb | 724 | ### Q: Is there any documentation on the database tables and fields? |
5aa75474 BP |
725 | |
726 | A: Yes. ovs-vswitchd.conf.db(5) is a comprehensive reference. | |
727 | ||
542cc9bb | 728 | ### Q: When I run ovs-dpctl I no longer see the bridges I created. Instead, |
acf60855 JP |
729 | I only see a datapath called "ovs-system". How can I see datapath |
730 | information about a particular bridge? | |
731 | ||
732 | A: In version 1.9.0, OVS switched to using a single datapath that is | |
733 | shared by all bridges of that type. The "ovs-appctl dpif/*" | |
734 | commands provide similar functionality that is scoped by the bridge. | |
735 | ||
542cc9bb | 736 | ### Q: I created a GRE port using ovs-vsctl so why can't I send traffic or |
004a6249 JG |
737 | see the port in the datapath? |
738 | ||
739 | A: On Linux kernels before 3.11, the OVS GRE module and Linux GRE module | |
740 | cannot be loaded at the same time. It is likely that on your system the | |
741 | Linux GRE module is already loaded and blocking OVS (to confirm, check | |
742 | dmesg for errors regarding GRE registration). To fix this, unload all | |
743 | GRE modules that appear in lsmod as well as the OVS kernel module. You | |
542cc9bb | 744 | can then reload the OVS module following the directions in |
9feb1017 | 745 | [INSTALL.md], which will ensure that dependencies are satisfied. |
004a6249 | 746 | |
542cc9bb | 747 | ### Q: Open vSwitch does not seem to obey my packet filter rules. |
c6bbc394 YT |
748 | |
749 | A: It depends on mechanisms and configurations you want to use. | |
750 | ||
751 | You cannot usefully use typical packet filters, like iptables, on | |
752 | physical Ethernet ports that you add to an Open vSwitch bridge. | |
753 | This is because Open vSwitch captures packets from the interface at | |
754 | a layer lower below where typical packet-filter implementations | |
755 | install their hooks. (This actually applies to any interface of | |
756 | type "system" that you might add to an Open vSwitch bridge.) | |
757 | ||
758 | You can usefully use typical packet filters on Open vSwitch | |
759 | internal ports as they are mostly ordinary interfaces from the point | |
760 | of view of packet filters. | |
761 | ||
762 | For example, suppose you create a bridge br0 and add Ethernet port | |
763 | eth0 to it. Then you can usefully add iptables rules to affect the | |
764 | internal interface br0, but not the physical interface eth0. (br0 | |
765 | is also where you would add an IP address, as discussed elsewhere | |
766 | in the FAQ.) | |
767 | ||
768 | For simple filtering rules, it might be possible to achieve similar | |
769 | results by installing appropriate OpenFlow flows instead. | |
770 | ||
771 | If the use of a particular packet filter setup is essential, Open | |
772 | vSwitch might not be the best choice for you. On Linux, you might | |
773 | want to consider using the Linux Bridge. (This is the only choice if | |
774 | you want to use ebtables rules.) On NetBSD, you might want to | |
775 | consider using the bridge(4) with BRIDGE_IPF option. | |
776 | ||
542cc9bb | 777 | ### Q: It seems that Open vSwitch does nothing when I removed a port and |
dd63a57e YT |
778 | then immediately put it back. For example, consider that p1 is |
779 | a port of type=internal: | |
780 | ||
781 | ovs-vsctl del-port br0 p1 -- \ | |
782 | add-port br0 p1 -- \ | |
783 | set interface p1 type=internal | |
784 | ||
785 | A: It's an expected behaviour. | |
786 | ||
7494dca8 YT |
787 | If del-port and add-port happen in a single OVSDB transaction as |
788 | your example, Open vSwitch always "skips" the intermediate steps. | |
dd63a57e YT |
789 | Even if they are done in multiple transactions, it's still allowed |
790 | for Open vSwitch to skip the intermediate steps and just implement | |
791 | the overall effect. In both cases, your example would be turned | |
792 | into a no-op. | |
793 | ||
794 | If you want to make Open vSwitch actually destroy and then re-create | |
795 | the port for some side effects like resetting kernel setting for the | |
796 | corresponding interface, you need to separate operations into multiple | |
797 | OVSDB transactions and ensure that at least the first one does not have | |
798 | --no-wait. In the following example, the first ovs-vsctl will block | |
799 | until Open vSwitch reloads the new configuration and removes the port: | |
800 | ||
801 | ovs-vsctl del-port br0 p1 | |
802 | ovs-vsctl add-port br0 p1 -- \ | |
803 | set interface p1 type=internal | |
c483d489 | 804 | |
ed5c5110 BP |
805 | ### Q: I want to add thousands of ports to an Open vSwitch bridge, but |
806 | it takes too long (minutes or hours) to do it with ovs-vsctl. How | |
807 | can I do it faster? | |
808 | ||
809 | A: If you add them one at a time with ovs-vsctl, it can take a long | |
810 | time to add thousands of ports to an Open vSwitch bridge. This is | |
811 | because every invocation of ovs-vsctl first reads the current | |
812 | configuration from OVSDB. As the number of ports grows, this | |
813 | starts to take an appreciable amount of time, and when it is | |
814 | repeated thousands of times the total time becomes significant. | |
815 | ||
816 | The solution is to add the ports in one invocation of ovs-vsctl (or | |
817 | a small number of them). For example, using bash: | |
818 | ||
819 | ovs-vsctl add-br br0 | |
820 | cmds=; for i in {1..5000}; do cmds+=" -- add-port br0 p$i"; done | |
821 | ovs-vsctl $cmds | |
822 | ||
823 | takes seconds, not minutes or hours, in the OVS sandbox environment. | |
824 | ||
bb50a697 BP |
825 | ### Q: I created a bridge named br0. My bridge shows up in "ovs-vsctl |
826 | show", but "ovs-ofctl show br0" just prints "br0 is not a bridge | |
827 | or a socket". | |
828 | ||
829 | A: Open vSwitch wasn't able to create the bridge. Check the | |
830 | ovs-vswitchd log for details (Debian and Red Hat packaging for Open | |
831 | vSwitch put it in /var/log/openvswitch/ovs-vswitchd.log). | |
832 | ||
833 | In general, the Open vSwitch database reflects the desired | |
834 | configuration state. ovs-vswitchd monitors the database and, when | |
835 | it changes, reconfigures the system to reflect the new desired | |
836 | state. This normally happens very quickly. Thus, a discrepancy | |
837 | between the database and the actual state indicates that | |
838 | ovs-vswitchd could not implement the configuration, and so one | |
839 | should check the log to find out why. (Another possible cause is | |
840 | that ovs-vswitchd is not running. This will make "ovs-vsctl" | |
841 | commands hang, if they change the configuration, unless one | |
842 | specifies "--no-wait".) | |
843 | ||
844 | ### Q: I have a bridge br0. I added a new port vif1.0, and it shows | |
845 | up in "ovs-vsctl show", but "ovs-vsctl list port" says that it has | |
846 | OpenFlow port ("ofport") -1, and "ovs-ofctl show br0" doesn't show | |
847 | vif1.0 at all. | |
848 | ||
849 | A: Open vSwitch wasn't able to create the port. Check the | |
850 | ovs-vswitchd log for details (Debian and Red Hat packaging for Open | |
851 | vSwitch put it in /var/log/openvswitch/ovs-vswitchd.log). Please | |
852 | see the previous question for more information. | |
853 | ||
854 | You may want to upgrade to Open vSwitch 2.3 (or later), in which | |
855 | ovs-vsctl will immediately report when there is an issue creating a | |
856 | port. | |
857 | ||
1c98db0d BP |
858 | ### Q: I created a tap device tap0, configured an IP address on it, and |
859 | added it to a bridge, like this: | |
860 | ||
861 | tunctl -t tap0 | |
862 | ifconfig tap0 192.168.0.123 | |
863 | ovs-vsctl add-br br0 | |
864 | ovs-vsctl add-port br0 tap0 | |
865 | ||
866 | I expected that I could then use this IP address to contact other | |
867 | hosts on the network, but it doesn't work. Why not? | |
868 | ||
869 | A: The short answer is that this is a misuse of a "tap" device. Use | |
870 | an "internal" device implemented by Open vSwitch, which works | |
871 | differently and is designed for this use. To solve this problem | |
872 | with an internal device, instead run: | |
873 | ||
874 | ovs-vsctl add-br br0 | |
875 | ovs-vsctl add-port br0 int0 -- set Interface int0 type=internal | |
876 | ifconfig int0 192.168.0.123 | |
877 | ||
878 | Even more simply, you can take advantage of the internal port that | |
879 | every bridge has under the name of the bridge: | |
880 | ||
881 | ovs-vsctl add-br br0 | |
882 | ifconfig br0 192.168.0.123 | |
883 | ||
884 | In more detail, a "tap" device is an interface between the Linux | |
885 | (or *BSD) network stack and a user program that opens it as a | |
886 | socket. When the "tap" device transmits a packet, it appears in | |
887 | the socket opened by the userspace program. Conversely, when the | |
888 | userspace program writes to the "tap" socket, the kernel TCP/IP | |
889 | stack processes the packet as if it had been received by the "tap" | |
890 | device. | |
891 | ||
892 | Consider the configuration above. Given this configuration, if you | |
893 | "ping" an IP address in the 192.168.0.x subnet, the Linux kernel | |
894 | routing stack will transmit an ARP on the tap0 device. Open | |
895 | vSwitch userspace treats "tap" devices just like any other network | |
896 | device; that is, it doesn't open them as "tap" sockets. That means | |
897 | that the ARP packet will simply get dropped. | |
898 | ||
899 | You might wonder why the Open vSwitch kernel module doesn't | |
900 | intercept the ARP packet and bridge it. After all, Open vSwitch | |
901 | intercepts packets on other devices. The answer is that Open | |
902 | vSwitch only intercepts *received* packets, but this is a packet | |
903 | being transmitted. The same thing happens for all other types of | |
904 | network devices, except for Open vSwitch "internal" ports. If you, | |
905 | for example, add a physical Ethernet port to an OVS bridge, | |
906 | configure an IP address on a physical Ethernet port, and then issue | |
907 | a "ping" to an address in that subnet, the same thing happens: an | |
908 | ARP gets transmitted on the physical Ethernet port and Open vSwitch | |
909 | never sees it. (You should not do that, as documented at the | |
910 | beginning of this section.) | |
911 | ||
912 | It can make sense to add a "tap" device to an Open vSwitch bridge, | |
913 | if some userspace program (other than Open vSwitch) has opened the | |
914 | tap socket. This is the case, for example, if the "tap" device was | |
915 | created by KVM (or QEMU) to simulate a virtual NIC. In such a | |
916 | case, when OVS bridges a packet to the "tap" device, the kernel | |
917 | forwards that packet to KVM in userspace, which passes it along to | |
918 | the VM, and in the other direction, when the VM sends a packet, KVM | |
919 | writes it to the "tap" socket, which causes OVS to receive it and | |
920 | bridge it to the other OVS ports. Please note that in such a case | |
921 | no IP address is configured on the "tap" device (there is normally | |
922 | an IP address configured in the virtual NIC inside the VM, but this | |
923 | is not visible to the host Linux kernel or to Open vSwitch). | |
924 | ||
925 | There is one special case in which Open vSwitch does directly read | |
926 | and write "tap" sockets. This is an implementation detail of the | |
927 | Open vSwitch userspace switch, which implements its "internal" | |
928 | ports as Linux (or *BSD) "tap" sockets. In such a userspace | |
929 | switch, OVS receives packets sent on the "tap" device used to | |
930 | implement an "internal" port by reading the associated "tap" | |
931 | socket, and bridges them to the rest of the switch. In the other | |
932 | direction, OVS transmits packets bridged to the "internal" port by | |
933 | writing them to the "tap" socket, causing them to be processed by | |
934 | the kernel TCP/IP stack as if they had been received on the "tap" | |
935 | device. Users should not need to be concerned with this | |
936 | implementation detail. | |
937 | ||
938 | Open vSwitch has a network device type called "tap". This is | |
939 | intended only for implementing "internal" ports in the OVS | |
940 | userspace switch and should not be used otherwise. In particular, | |
941 | users should not configure KVM "tap" devices as type "tap" (use | |
942 | type "system", the default, instead). | |
943 | ||
bb50a697 | 944 | |
bceafb63 BP |
945 | Quality of Service (QoS) |
946 | ------------------------ | |
947 | ||
542cc9bb | 948 | ### Q: How do I configure Quality of Service (QoS)? |
bceafb63 BP |
949 | |
950 | A: Suppose that you want to set up bridge br0 connected to physical | |
951 | Ethernet port eth0 (a 1 Gbps device) and virtual machine interfaces | |
952 | vif1.0 and vif2.0, and that you want to limit traffic from vif1.0 | |
953 | to eth0 to 10 Mbps and from vif2.0 to eth0 to 20 Mbps. Then, you | |
954 | could configure the bridge this way: | |
955 | ||
956 | ovs-vsctl -- \ | |
957 | add-br br0 -- \ | |
0dc8b8c2 YT |
958 | add-port br0 eth0 -- \ |
959 | add-port br0 vif1.0 -- set interface vif1.0 ofport_request=5 -- \ | |
960 | add-port br0 vif2.0 -- set interface vif2.0 ofport_request=6 -- \ | |
961 | set port eth0 qos=@newqos -- \ | |
962 | --id=@newqos create qos type=linux-htb \ | |
bceafb63 | 963 | other-config:max-rate=1000000000 \ |
0dc8b8c2 YT |
964 | queues:123=@vif10queue \ |
965 | queues:234=@vif20queue -- \ | |
bceafb63 BP |
966 | --id=@vif10queue create queue other-config:max-rate=10000000 -- \ |
967 | --id=@vif20queue create queue other-config:max-rate=20000000 | |
968 | ||
969 | At this point, bridge br0 is configured with the ports and eth0 is | |
970 | configured with the queues that you need for QoS, but nothing is | |
971 | actually directing packets from vif1.0 or vif2.0 to the queues that | |
972 | we have set up for them. That means that all of the packets to | |
973 | eth0 are going to the "default queue", which is not what we want. | |
974 | ||
975 | We use OpenFlow to direct packets from vif1.0 and vif2.0 to the | |
976 | queues reserved for them: | |
977 | ||
978 | ovs-ofctl add-flow br0 in_port=5,actions=set_queue:123,normal | |
979 | ovs-ofctl add-flow br0 in_port=6,actions=set_queue:234,normal | |
980 | ||
981 | Each of the above flows matches on the input port, sets up the | |
982 | appropriate queue (123 for vif1.0, 234 for vif2.0), and then | |
983 | executes the "normal" action, which performs the same switching | |
984 | that Open vSwitch would have done without any OpenFlow flows being | |
985 | present. (We know that vif1.0 and vif2.0 have OpenFlow port | |
986 | numbers 5 and 6, respectively, because we set their ofport_request | |
987 | columns above. If we had not done that, then we would have needed | |
988 | to find out their port numbers before setting up these flows.) | |
989 | ||
990 | Now traffic going from vif1.0 or vif2.0 to eth0 should be | |
991 | rate-limited. | |
992 | ||
993 | By the way, if you delete the bridge created by the above commands, | |
994 | with: | |
995 | ||
996 | ovs-vsctl del-br br0 | |
997 | ||
998 | then that will leave one unreferenced QoS record and two | |
999 | unreferenced Queue records in the Open vSwich database. One way to | |
1000 | clear them out, assuming you don't have other QoS or Queue records | |
1001 | that you want to keep, is: | |
1002 | ||
1003 | ovs-vsctl -- --all destroy QoS -- --all destroy Queue | |
1004 | ||
7839bb41 BP |
1005 | If you do want to keep some QoS or Queue records, or the Open |
1006 | vSwitch you are using is older than version 1.8 (which added the | |
1007 | --all option), then you will have to destroy QoS and Queue records | |
1008 | individually. | |
1009 | ||
542cc9bb | 1010 | ### Q: I configured Quality of Service (QoS) in my OpenFlow network by |
bceafb63 BP |
1011 | adding records to the QoS and Queue table, but the results aren't |
1012 | what I expect. | |
1013 | ||
1014 | A: Did you install OpenFlow flows that use your queues? This is the | |
1015 | primary way to tell Open vSwitch which queues you want to use. If | |
1016 | you don't do this, then the default queue will be used, which will | |
1017 | probably not have the effect you want. | |
1018 | ||
1019 | Refer to the previous question for an example. | |
1020 | ||
542cc9bb | 1021 | ### Q: I'd like to take advantage of some QoS feature that Open vSwitch |
e6d29aa7 BP |
1022 | doesn't yet support. How do I do that? |
1023 | ||
1024 | A: Open vSwitch does not implement QoS itself. Instead, it can | |
1025 | configure some, but not all, of the QoS features built into the | |
1026 | Linux kernel. If you need some QoS feature that OVS cannot | |
1027 | configure itself, then the first step is to figure out whether | |
1028 | Linux QoS supports that feature. If it does, then you can submit a | |
1029 | patch to support Open vSwitch configuration for that feature, or | |
1030 | you can use "tc" directly to configure the feature in Linux. (If | |
1031 | Linux QoS doesn't support the feature you want, then first you have | |
1032 | to add that support to Linux.) | |
1033 | ||
542cc9bb | 1034 | ### Q: I configured QoS, correctly, but my measurements show that it isn't |
bceafb63 BP |
1035 | working as well as I expect. |
1036 | ||
1037 | A: With the Linux kernel, the Open vSwitch implementation of QoS has | |
1038 | two aspects: | |
1039 | ||
542cc9bb TG |
1040 | - Open vSwitch configures a subset of Linux kernel QoS |
1041 | features, according to what is in OVSDB. It is possible that | |
1042 | this code has bugs. If you believe that this is so, then you | |
1043 | can configure the Linux traffic control (QoS) stack directly | |
1044 | with the "tc" program. If you get better results that way, | |
1045 | you can send a detailed bug report to bugs@openvswitch.org. | |
bceafb63 | 1046 | |
542cc9bb TG |
1047 | It is certain that Open vSwitch cannot configure every Linux |
1048 | kernel QoS feature. If you need some feature that OVS cannot | |
1049 | configure, then you can also use "tc" directly (or add that | |
1050 | feature to OVS). | |
bceafb63 | 1051 | |
542cc9bb TG |
1052 | - The Open vSwitch implementation of OpenFlow allows flows to |
1053 | be directed to particular queues. This is pretty simple and | |
1054 | unlikely to have serious bugs at this point. | |
bceafb63 BP |
1055 | |
1056 | However, most problems with QoS on Linux are not bugs in Open | |
1057 | vSwitch at all. They tend to be either configuration errors | |
1058 | (please see the earlier questions in this section) or issues with | |
1059 | the traffic control (QoS) stack in Linux. The Open vSwitch | |
1060 | developers are not experts on Linux traffic control. We suggest | |
1061 | that, if you believe you are encountering a problem with Linux | |
1062 | traffic control, that you consult the tc manpages (e.g. tc(8), | |
1063 | tc-htb(8), tc-hfsc(8)), web resources (e.g. http://lartc.org/), or | |
1064 | mailing lists (e.g. http://vger.kernel.org/vger-lists.html#netdev). | |
1065 | ||
542cc9bb | 1066 | ### Q: Does Open vSwitch support OpenFlow meters? |
733fd270 BP |
1067 | |
1068 | A: Since version 2.0, Open vSwitch has OpenFlow protocol support for | |
1069 | OpenFlow meters. There is no implementation of meters in the Open | |
1070 | vSwitch software switch (neither the kernel-based nor userspace | |
1071 | switches). | |
1072 | ||
bceafb63 | 1073 | |
c483d489 BP |
1074 | VLANs |
1075 | ----- | |
1076 | ||
542cc9bb | 1077 | ### Q: What's a VLAN? |
14481051 BP |
1078 | |
1079 | A: At the simplest level, a VLAN (short for "virtual LAN") is a way to | |
1080 | partition a single switch into multiple switches. Suppose, for | |
1081 | example, that you have two groups of machines, group A and group B. | |
1082 | You want the machines in group A to be able to talk to each other, | |
1083 | and you want the machine in group B to be able to talk to each | |
1084 | other, but you don't want the machines in group A to be able to | |
1085 | talk to the machines in group B. You can do this with two | |
1086 | switches, by plugging the machines in group A into one switch and | |
1087 | the machines in group B into the other switch. | |
1088 | ||
1089 | If you only have one switch, then you can use VLANs to do the same | |
1090 | thing, by configuring the ports for machines in group A as VLAN | |
1091 | "access ports" for one VLAN and the ports for group B as "access | |
1092 | ports" for a different VLAN. The switch will only forward packets | |
1093 | between ports that are assigned to the same VLAN, so this | |
1094 | effectively subdivides your single switch into two independent | |
1095 | switches, one for each group of machines. | |
1096 | ||
1097 | So far we haven't said anything about VLAN headers. With access | |
1098 | ports, like we've described so far, no VLAN header is present in | |
1099 | the Ethernet frame. This means that the machines (or switches) | |
1100 | connected to access ports need not be aware that VLANs are | |
1101 | involved, just like in the case where we use two different physical | |
1102 | switches. | |
1103 | ||
1104 | Now suppose that you have a whole bunch of switches in your | |
1105 | network, instead of just one, and that some machines in group A are | |
1106 | connected directly to both switches 1 and 2. To allow these | |
1107 | machines to talk to each other, you could add an access port for | |
1108 | group A's VLAN to switch 1 and another to switch 2, and then | |
1109 | connect an Ethernet cable between those ports. That works fine, | |
1110 | but it doesn't scale well as the number of switches and the number | |
1111 | of VLANs increases, because you use up a lot of valuable switch | |
1112 | ports just connecting together your VLANs. | |
1113 | ||
1114 | This is where VLAN headers come in. Instead of using one cable and | |
1115 | two ports per VLAN to connect a pair of switches, we configure a | |
1116 | port on each switch as a VLAN "trunk port". Packets sent and | |
1117 | received on a trunk port carry a VLAN header that says what VLAN | |
1118 | the packet belongs to, so that only two ports total are required to | |
1119 | connect the switches, regardless of the number of VLANs in use. | |
1120 | Normally, only switches (either physical or virtual) are connected | |
1121 | to a trunk port, not individual hosts, because individual hosts | |
1122 | don't expect to see a VLAN header in the traffic that they receive. | |
1123 | ||
1124 | None of the above discussion says anything about particular VLAN | |
1125 | numbers. This is because VLAN numbers are completely arbitrary. | |
1126 | One must only ensure that a given VLAN is numbered consistently | |
1127 | throughout a network and that different VLANs are given different | |
1128 | numbers. (That said, VLAN 0 is usually synonymous with a packet | |
1129 | that has no VLAN header, and VLAN 4095 is reserved.) | |
1130 | ||
542cc9bb | 1131 | ### Q: VLANs don't work. |
c483d489 BP |
1132 | |
1133 | A: Many drivers in Linux kernels before version 3.3 had VLAN-related | |
1134 | bugs. If you are having problems with VLANs that you suspect to be | |
1135 | driver related, then you have several options: | |
1136 | ||
542cc9bb | 1137 | - Upgrade to Linux 3.3 or later. |
c483d489 | 1138 | |
542cc9bb TG |
1139 | - Build and install a fixed version of the particular driver |
1140 | that is causing trouble, if one is available. | |
c483d489 | 1141 | |
542cc9bb | 1142 | - Use a NIC whose driver does not have VLAN problems. |
c483d489 | 1143 | |
542cc9bb TG |
1144 | - Use "VLAN splinters", a feature in Open vSwitch 1.4 and later |
1145 | that works around bugs in kernel drivers. To enable VLAN | |
1146 | splinters on interface eth0, use the command: | |
c483d489 | 1147 | |
542cc9bb | 1148 | ovs-vsctl set interface eth0 other-config:enable-vlan-splinters=true |
c483d489 | 1149 | |
542cc9bb TG |
1150 | For VLAN splinters to be effective, Open vSwitch must know |
1151 | which VLANs are in use. See the "VLAN splinters" section in | |
1152 | the Interface table in ovs-vswitchd.conf.db(5) for details on | |
1153 | how Open vSwitch infers in-use VLANs. | |
c483d489 | 1154 | |
542cc9bb TG |
1155 | VLAN splinters increase memory use and reduce performance, so |
1156 | use them only if needed. | |
c483d489 | 1157 | |
542cc9bb TG |
1158 | - Apply the "vlan workaround" patch from the XenServer kernel |
1159 | patch queue, build Open vSwitch against this patched kernel, | |
1160 | and then use ovs-vlan-bug-workaround(8) to enable the VLAN | |
1161 | workaround for each interface whose driver is buggy. | |
c483d489 | 1162 | |
542cc9bb TG |
1163 | (This is a nontrivial exercise, so this option is included |
1164 | only for completeness.) | |
c483d489 BP |
1165 | |
1166 | It is not always easy to tell whether a Linux kernel driver has | |
1167 | buggy VLAN support. The ovs-vlan-test(8) and ovs-test(8) utilities | |
1168 | can help you test. See their manpages for details. Of the two | |
1169 | utilities, ovs-test(8) is newer and more thorough, but | |
1170 | ovs-vlan-test(8) may be easier to use. | |
1171 | ||
542cc9bb | 1172 | ### Q: VLANs still don't work. I've tested the driver so I know that it's OK. |
c483d489 BP |
1173 | |
1174 | A: Do you have VLANs enabled on the physical switch that OVS is | |
1175 | attached to? Make sure that the port is configured to trunk the | |
1176 | VLAN or VLANs that you are using with OVS. | |
1177 | ||
542cc9bb | 1178 | ### Q: Outgoing VLAN-tagged traffic goes through OVS to my physical switch |
c483d489 BP |
1179 | and to its destination host, but OVS seems to drop incoming return |
1180 | traffic. | |
1181 | ||
1182 | A: It's possible that you have the VLAN configured on your physical | |
1183 | switch as the "native" VLAN. In this mode, the switch treats | |
1184 | incoming packets either tagged with the native VLAN or untagged as | |
1185 | part of the native VLAN. It may also send outgoing packets in the | |
1186 | native VLAN without a VLAN tag. | |
1187 | ||
1188 | If this is the case, you have two choices: | |
1189 | ||
542cc9bb TG |
1190 | - Change the physical switch port configuration to tag packets |
1191 | it forwards to OVS with the native VLAN instead of forwarding | |
1192 | them untagged. | |
c483d489 | 1193 | |
542cc9bb TG |
1194 | - Change the OVS configuration for the physical port to a |
1195 | native VLAN mode. For example, the following sets up a | |
1196 | bridge with port eth0 in "native-tagged" mode in VLAN 9: | |
c483d489 | 1197 | |
542cc9bb TG |
1198 | ovs-vsctl add-br br0 |
1199 | ovs-vsctl add-port br0 eth0 tag=9 vlan_mode=native-tagged | |
c483d489 | 1200 | |
542cc9bb TG |
1201 | In this situation, "native-untagged" mode will probably work |
1202 | equally well. Refer to the documentation for the Port table | |
1203 | in ovs-vswitchd.conf.db(5) for more information. | |
c483d489 | 1204 | |
542cc9bb | 1205 | ### Q: I added a pair of VMs on different VLANs, like this: |
8d45e938 BP |
1206 | |
1207 | ovs-vsctl add-br br0 | |
1208 | ovs-vsctl add-port br0 eth0 | |
1209 | ovs-vsctl add-port br0 tap0 tag=9 | |
1210 | ovs-vsctl add-port br0 tap1 tag=10 | |
1211 | ||
1212 | but the VMs can't access each other, the external network, or the | |
1213 | Internet. | |
1214 | ||
1215 | A: It is to be expected that the VMs can't access each other. VLANs | |
1216 | are a means to partition a network. When you configured tap0 and | |
1217 | tap1 as access ports for different VLANs, you indicated that they | |
1218 | should be isolated from each other. | |
1219 | ||
1220 | As for the external network and the Internet, it seems likely that | |
1221 | the machines you are trying to access are not on VLAN 9 (or 10) and | |
1222 | that the Internet is not available on VLAN 9 (or 10). | |
1223 | ||
542cc9bb | 1224 | ### Q: I added a pair of VMs on the same VLAN, like this: |
3c8399a2 BP |
1225 | |
1226 | ovs-vsctl add-br br0 | |
1227 | ovs-vsctl add-port br0 eth0 | |
1228 | ovs-vsctl add-port br0 tap0 tag=9 | |
1229 | ovs-vsctl add-port br0 tap1 tag=9 | |
1230 | ||
1231 | The VMs can access each other, but not the external network or the | |
1232 | Internet. | |
1233 | ||
1234 | A: It seems likely that the machines you are trying to access in the | |
1235 | external network are not on VLAN 9 and that the Internet is not | |
1236 | available on VLAN 9. Also, ensure VLAN 9 is set up as an allowed | |
1237 | trunk VLAN on the upstream switch port to which eth0 is connected. | |
1238 | ||
542cc9bb | 1239 | ### Q: Can I configure an IP address on a VLAN? |
c483d489 BP |
1240 | |
1241 | A: Yes. Use an "internal port" configured as an access port. For | |
1242 | example, the following configures IP address 192.168.0.7 on VLAN 9. | |
1243 | That is, OVS will forward packets from eth0 to 192.168.0.7 only if | |
1244 | they have an 802.1Q header with VLAN 9. Conversely, traffic | |
1245 | forwarded from 192.168.0.7 to eth0 will be tagged with an 802.1Q | |
1246 | header with VLAN 9: | |
1247 | ||
1248 | ovs-vsctl add-br br0 | |
1249 | ovs-vsctl add-port br0 eth0 | |
1250 | ovs-vsctl add-port br0 vlan9 tag=9 -- set interface vlan9 type=internal | |
1251 | ifconfig vlan9 192.168.0.7 | |
1252 | ||
8dc54921 BP |
1253 | See also the following question. |
1254 | ||
542cc9bb | 1255 | ### Q: I configured one IP address on VLAN 0 and another on VLAN 9, like |
8dc54921 BP |
1256 | this: |
1257 | ||
1258 | ovs-vsctl add-br br0 | |
1259 | ovs-vsctl add-port br0 eth0 | |
1260 | ifconfig br0 192.168.0.5 | |
1261 | ovs-vsctl add-port br0 vlan9 tag=9 -- set interface vlan9 type=internal | |
1262 | ifconfig vlan9 192.168.0.9 | |
1263 | ||
1264 | but other hosts that are only on VLAN 0 can reach the IP address | |
1265 | configured on VLAN 9. What's going on? | |
1266 | ||
1267 | A: RFC 1122 section 3.3.4.2 "Multihoming Requirements" describes two | |
1268 | approaches to IP address handling in Internet hosts: | |
1269 | ||
542cc9bb TG |
1270 | - In the "Strong ES Model", where an ES is a host ("End |
1271 | System"), an IP address is primarily associated with a | |
1272 | particular interface. The host discards packets that arrive | |
1273 | on interface A if they are destined for an IP address that is | |
1274 | configured on interface B. The host never sends packets from | |
1275 | interface A using a source address configured on interface B. | |
1276 | ||
1277 | - In the "Weak ES Model", an IP address is primarily associated | |
1278 | with a host. The host accepts packets that arrive on any | |
1279 | interface if they are destined for any of the host's IP | |
1280 | addresses, even if the address is configured on some | |
1281 | interface other than the one on which it arrived. The host | |
1282 | does not restrict itself to sending packets from an IP | |
1283 | address associated with the originating interface. | |
8dc54921 BP |
1284 | |
1285 | Linux uses the weak ES model. That means that when packets | |
1286 | destined to the VLAN 9 IP address arrive on eth0 and are bridged to | |
1287 | br0, the kernel IP stack accepts them there for the VLAN 9 IP | |
1288 | address, even though they were not received on vlan9, the network | |
1289 | device for vlan9. | |
1290 | ||
1291 | To simulate the strong ES model on Linux, one may add iptables rule | |
1292 | to filter packets based on source and destination address and | |
1293 | adjust ARP configuration with sysctls. | |
1294 | ||
1295 | BSD uses the strong ES model. | |
1296 | ||
542cc9bb | 1297 | ### Q: My OpenFlow controller doesn't see the VLANs that I expect. |
c483d489 BP |
1298 | |
1299 | A: The configuration for VLANs in the Open vSwitch database (e.g. via | |
1300 | ovs-vsctl) only affects traffic that goes through Open vSwitch's | |
1301 | implementation of the OpenFlow "normal switching" action. By | |
1302 | default, when Open vSwitch isn't connected to a controller and | |
1303 | nothing has been manually configured in the flow table, all traffic | |
1304 | goes through the "normal switching" action. But, if you set up | |
1305 | OpenFlow flows on your own, through a controller or using ovs-ofctl | |
1306 | or through other means, then you have to implement VLAN handling | |
1307 | yourself. | |
1308 | ||
1309 | You can use "normal switching" as a component of your OpenFlow | |
1310 | actions, e.g. by putting "normal" into the lists of actions on | |
1311 | ovs-ofctl or by outputting to OFPP_NORMAL from an OpenFlow | |
241241f5 BP |
1312 | controller. In situations where this is not suitable, you can |
1313 | implement VLAN handling yourself, e.g.: | |
1314 | ||
542cc9bb TG |
1315 | - If a packet comes in on an access port, and the flow table |
1316 | needs to send it out on a trunk port, then the flow can add | |
1317 | the appropriate VLAN tag with the "mod_vlan_vid" action. | |
241241f5 | 1318 | |
542cc9bb TG |
1319 | - If a packet comes in on a trunk port, and the flow table |
1320 | needs to send it out on an access port, then the flow can | |
1321 | strip the VLAN tag with the "strip_vlan" action. | |
c483d489 | 1322 | |
542cc9bb | 1323 | ### Q: I configured ports on a bridge as access ports with different VLAN |
f0a0c1a6 BP |
1324 | tags, like this: |
1325 | ||
1326 | ovs-vsctl add-br br0 | |
d4763d1d | 1327 | ovs-vsctl set-controller br0 tcp:192.168.0.10:6653 |
f0a0c1a6 BP |
1328 | ovs-vsctl add-port br0 eth0 |
1329 | ovs-vsctl add-port br0 tap0 tag=9 | |
1330 | ovs-vsctl add-port br0 tap1 tag=10 | |
1331 | ||
1332 | but the VMs running behind tap0 and tap1 can still communicate, | |
1333 | that is, they are not isolated from each other even though they are | |
1334 | on different VLANs. | |
1335 | ||
1336 | A: Do you have a controller configured on br0 (as the commands above | |
1337 | do)? If so, then this is a variant on the previous question, "My | |
1338 | OpenFlow controller doesn't see the VLANs that I expect," and you | |
1339 | can refer to the answer there for more information. | |
1340 | ||
542cc9bb | 1341 | ### Q: How MAC learning works with VLANs? |
f8003b53 YT |
1342 | |
1343 | A: Open vSwitch implements Independent VLAN Learning (IVL) for | |
1344 | OFPP_NORMAL action. I.e. it logically has separate learning tables | |
1345 | for each VLANs. | |
1346 | ||
c483d489 | 1347 | |
0edbe3fb KM |
1348 | VXLANs |
1349 | ----- | |
1350 | ||
542cc9bb | 1351 | ### Q: What's a VXLAN? |
0edbe3fb KM |
1352 | |
1353 | A: VXLAN stands for Virtual eXtensible Local Area Network, and is a means | |
1354 | to solve the scaling challenges of VLAN networks in a multi-tenant | |
1355 | environment. VXLAN is an overlay network which transports an L2 network | |
1356 | over an existing L3 network. For more information on VXLAN, please see | |
bedd6854 | 1357 | RFC 7348: |
0edbe3fb | 1358 | |
bedd6854 | 1359 | http://tools.ietf.org/html/rfc7348 |
0edbe3fb | 1360 | |
542cc9bb | 1361 | ### Q: How much of the VXLAN protocol does Open vSwitch currently support? |
0edbe3fb KM |
1362 | |
1363 | A: Open vSwitch currently supports the framing format for packets on the | |
1364 | wire. There is currently no support for the multicast aspects of VXLAN. | |
1365 | To get around the lack of multicast support, it is possible to | |
1366 | pre-provision MAC to IP address mappings either manually or from a | |
1367 | controller. | |
1368 | ||
542cc9bb | 1369 | ### Q: What destination UDP port does the VXLAN implementation in Open vSwitch |
0edbe3fb KM |
1370 | use? |
1371 | ||
1372 | A: By default, Open vSwitch will use the assigned IANA port for VXLAN, which | |
1373 | is 4789. However, it is possible to configure the destination UDP port | |
1374 | manually on a per-VXLAN tunnel basis. An example of this configuration is | |
1375 | provided below. | |
1376 | ||
b770275d RÃ…A |
1377 | ovs-vsctl add-br br0 |
1378 | ovs-vsctl add-port br0 vxlan1 -- set interface vxlan1 | |
0edbe3fb KM |
1379 | type=vxlan options:remote_ip=192.168.1.2 options:key=flow |
1380 | options:dst_port=8472 | |
1381 | ||
1382 | ||
0f5edef0 BP |
1383 | Using OpenFlow (Manually or Via Controller) |
1384 | ------------------------------------------- | |
c483d489 | 1385 | |
542cc9bb | 1386 | ### Q: What versions of OpenFlow does Open vSwitch support? |
7b287e99 | 1387 | |
c37c0382 AC |
1388 | A: The following table lists the versions of OpenFlow supported by |
1389 | each version of Open vSwitch: | |
7b287e99 | 1390 | |
42dccab5 | 1391 | Open vSwitch OF1.0 OF1.1 OF1.2 OF1.3 OF1.4 OF1.5 |
542cc9bb | 1392 | ###============ ===== ===== ===== ===== ===== ===== |
42dccab5 BP |
1393 | 1.9 and earlier yes --- --- --- --- --- |
1394 | 1.10 yes --- [*] [*] --- --- | |
1395 | 1.11 yes --- [*] [*] --- --- | |
1396 | 2.0 yes [*] [*] [*] --- --- | |
1397 | 2.1 yes [*] [*] [*] --- --- | |
1398 | 2.2 yes [*] [*] [*] [%] [*] | |
1399 | 2.3 yes yes yes yes [*] [*] | |
8e70e196 | 1400 | |
c37c0382 | 1401 | [*] Supported, with one or more missing features. |
aa233d57 | 1402 | [%] Experimental, unsafe implementation. |
8e70e196 | 1403 | |
6dc53744 BP |
1404 | Open vSwitch 2.3 enables OpenFlow 1.0, 1.1, 1.2, and 1.3 by default |
1405 | in ovs-vswitchd. In Open vSwitch 1.10 through 2.2, OpenFlow 1.1, | |
aa233d57 | 1406 | 1.2, and 1.3 must be enabled manually in ovs-vswitchd. OpenFlow |
42dccab5 BP |
1407 | 1.4 and 1.5 are also supported, with missing features, in Open |
1408 | vSwitch 2.3 and later, but not enabled by default. In any case, | |
1409 | the user may override the default: | |
75fa58f8 | 1410 | |
542cc9bb | 1411 | - To enable OpenFlow 1.0, 1.1, 1.2, and 1.3 on bridge br0: |
75fa58f8 | 1412 | |
542cc9bb | 1413 | ovs-vsctl set bridge br0 protocols=OpenFlow10,OpenFlow11,OpenFlow12,OpenFlow13 |
6dc53744 | 1414 | |
542cc9bb | 1415 | - To enable OpenFlow 1.0, 1.1, 1.2, 1.3, 1.4, and 1.5 on bridge br0: |
aa233d57 | 1416 | |
542cc9bb | 1417 | ovs-vsctl set bridge br0 protocols=OpenFlow10,OpenFlow11,OpenFlow12,OpenFlow13,OpenFlow14,OpenFlow15 |
aa233d57 | 1418 | |
542cc9bb | 1419 | - To enable only OpenFlow 1.0 on bridge br0: |
6dc53744 | 1420 | |
542cc9bb | 1421 | ovs-vsctl set bridge br0 protocols=OpenFlow10 |
6dc53744 BP |
1422 | |
1423 | All current versions of ovs-ofctl enable only OpenFlow 1.0 by | |
1424 | default. Use the -O option to enable support for later versions of | |
1425 | OpenFlow in ovs-ofctl. For example: | |
ac12b4cb BP |
1426 | |
1427 | ovs-ofctl -O OpenFlow13 dump-flows br0 | |
1428 | ||
aa233d57 BP |
1429 | (Open vSwitch 2.2 had an experimental implementation of OpenFlow |
1430 | 1.4 that could cause crashes. We don't recommend enabling it.) | |
ecb229be | 1431 | |
9feb1017 | 1432 | [OPENFLOW-1.1+.md] in the Open vSwitch source tree tracks support for |
42dccab5 BP |
1433 | OpenFlow 1.1 and later features. When support for OpenFlow 1.4 and |
1434 | 1.5 is solidly implemented, Open vSwitch will enable those version | |
1435 | by default. Also, the OpenFlow 1.5 specification is still under | |
1436 | development and thus subject to change. | |
7b287e99 | 1437 | |
542cc9bb | 1438 | ### Q: Does Open vSwitch support MPLS? |
c78a9ead BP |
1439 | |
1440 | A: Before version 1.11, Open vSwitch did not support MPLS. That is, | |
1441 | these versions can match on MPLS Ethernet types, but they cannot | |
1442 | match, push, or pop MPLS labels, nor can they look past MPLS labels | |
1443 | into the encapsulated packet. | |
1444 | ||
1445 | Open vSwitch versions 1.11, 2.0, and 2.1 have very minimal support | |
1446 | for MPLS. With the userspace datapath only, these versions can | |
1447 | match, push, or pop a single MPLS label, but they still cannot look | |
1448 | past MPLS labels (even after popping them) into the encapsulated | |
7e6410d2 BP |
1449 | packet. Kernel datapath support is unchanged from earlier |
1450 | versions. | |
c78a9ead | 1451 | |
b6fe204d BP |
1452 | Open vSwitch version 2.3 can match, push, or pop a single MPLS |
1453 | label and look past the MPLS label into the encapsulated packet. | |
1454 | Both userspace and kernel datapaths will be supported, but MPLS | |
1455 | processing always happens in userspace either way, so kernel | |
1456 | datapath performance will be disappointing. | |
1457 | ||
1458 | Open vSwitch version 2.4 can match, push, or pop up to 3 MPLS | |
1459 | labels and look past the MPLS label into the encapsulated packet. | |
1460 | It will have kernel support for MPLS, yielding improved | |
1461 | performance. | |
c78a9ead | 1462 | |
542cc9bb | 1463 | ### Q: I'm getting "error type 45250 code 0". What's that? |
c483d489 BP |
1464 | |
1465 | A: This is a Open vSwitch extension to OpenFlow error codes. Open | |
1466 | vSwitch uses this extension when it must report an error to an | |
1467 | OpenFlow controller but no standard OpenFlow error code is | |
1468 | suitable. | |
1469 | ||
1470 | Open vSwitch logs the errors that it sends to controllers, so the | |
1471 | easiest thing to do is probably to look at the ovs-vswitchd log to | |
1472 | find out what the error was. | |
1473 | ||
1474 | If you want to dissect the extended error message yourself, the | |
1475 | format is documented in include/openflow/nicira-ext.h in the Open | |
1476 | vSwitch source distribution. The extended error codes are | |
1477 | documented in lib/ofp-errors.h. | |
1478 | ||
1479 | Q1: Some of the traffic that I'd expect my OpenFlow controller to see | |
1480 | doesn't actually appear through the OpenFlow connection, even | |
1481 | though I know that it's going through. | |
1482 | Q2: Some of the OpenFlow flows that my controller sets up don't seem | |
1483 | to apply to certain traffic, especially traffic between OVS and | |
1484 | the controller itself. | |
1485 | ||
1486 | A: By default, Open vSwitch assumes that OpenFlow controllers are | |
1487 | connected "in-band", that is, that the controllers are actually | |
1488 | part of the network that is being controlled. In in-band mode, | |
1489 | Open vSwitch sets up special "hidden" flows to make sure that | |
1490 | traffic can make it back and forth between OVS and the controllers. | |
1491 | These hidden flows are higher priority than any flows that can be | |
1492 | set up through OpenFlow, and they are not visible through normal | |
1493 | OpenFlow flow table dumps. | |
1494 | ||
1495 | Usually, the hidden flows are desirable and helpful, but | |
1496 | occasionally they can cause unexpected behavior. You can view the | |
1497 | full OpenFlow flow table, including hidden flows, on bridge br0 | |
1498 | with the command: | |
1499 | ||
1500 | ovs-appctl bridge/dump-flows br0 | |
1501 | ||
1502 | to help you debug. The hidden flows are those with priorities | |
1503 | greater than 65535 (the maximum priority that can be set with | |
1504 | OpenFlow). | |
1505 | ||
1506 | The DESIGN file at the top level of the Open vSwitch source | |
1507 | distribution describes the in-band model in detail. | |
1508 | ||
1509 | If your controllers are not actually in-band (e.g. they are on | |
1510 | localhost via 127.0.0.1, or on a separate network), then you should | |
1511 | configure your controllers in "out-of-band" mode. If you have one | |
1512 | controller on bridge br0, then you can configure out-of-band mode | |
1513 | on it with: | |
1514 | ||
1515 | ovs-vsctl set controller br0 connection-mode=out-of-band | |
1516 | ||
542cc9bb | 1517 | ### Q: I configured all my controllers for out-of-band control mode but |
c483d489 BP |
1518 | "ovs-appctl bridge/dump-flows" still shows some hidden flows. |
1519 | ||
1520 | A: You probably have a remote manager configured (e.g. with "ovs-vsctl | |
1521 | set-manager"). By default, Open vSwitch assumes that managers need | |
1522 | in-band rules set up on every bridge. You can disable these rules | |
1523 | on bridge br0 with: | |
1524 | ||
1525 | ovs-vsctl set bridge br0 other-config:disable-in-band=true | |
1526 | ||
1527 | This actually disables in-band control entirely for the bridge, as | |
1528 | if all the bridge's controllers were configured for out-of-band | |
1529 | control. | |
1530 | ||
542cc9bb | 1531 | ### Q: My OpenFlow controller doesn't see the VLANs that I expect. |
c483d489 BP |
1532 | |
1533 | A: See answer under "VLANs", above. | |
1534 | ||
542cc9bb | 1535 | ### Q: I ran "ovs-ofctl add-flow br0 nw_dst=192.168.0.1,actions=drop" |
5cb2356b BP |
1536 | but I got a funny message like this: |
1537 | ||
1538 | ofp_util|INFO|normalization changed ofp_match, details: | |
1539 | ofp_util|INFO| pre: nw_dst=192.168.0.1 | |
1540 | ofp_util|INFO|post: | |
1541 | ||
1542 | and when I ran "ovs-ofctl dump-flows br0" I saw that my nw_dst | |
1543 | match had disappeared, so that the flow ends up matching every | |
1544 | packet. | |
1545 | ||
1546 | A: The term "normalization" in the log message means that a flow | |
1547 | cannot match on an L3 field without saying what L3 protocol is in | |
1548 | use. The "ovs-ofctl" command above didn't specify an L3 protocol, | |
1549 | so the L3 field match was dropped. | |
1550 | ||
1551 | In this case, the L3 protocol could be IP or ARP. A correct | |
1552 | command for each possibility is, respectively: | |
1553 | ||
1554 | ovs-ofctl add-flow br0 ip,nw_dst=192.168.0.1,actions=drop | |
1555 | ||
1556 | and | |
1557 | ||
1558 | ovs-ofctl add-flow br0 arp,nw_dst=192.168.0.1,actions=drop | |
1559 | ||
1560 | Similarly, a flow cannot match on an L4 field without saying what | |
1561 | L4 protocol is in use. For example, the flow match "tp_src=1234" | |
1562 | is, by itself, meaningless and will be ignored. Instead, to match | |
1563 | TCP source port 1234, write "tcp,tp_src=1234", or to match UDP | |
1564 | source port 1234, write "udp,tp_src=1234". | |
1565 | ||
542cc9bb | 1566 | ### Q: How can I figure out the OpenFlow port number for a given port? |
c5b25863 BP |
1567 | |
1568 | A: The OFPT_FEATURES_REQUEST message requests an OpenFlow switch to | |
1569 | respond with an OFPT_FEATURES_REPLY that, among other information, | |
1570 | includes a mapping between OpenFlow port names and numbers. From a | |
1571 | command prompt, "ovs-ofctl show br0" makes such a request and | |
1572 | prints the response for switch br0. | |
1573 | ||
1574 | The Interface table in the Open vSwitch database also maps OpenFlow | |
1575 | port names to numbers. To print the OpenFlow port number | |
1576 | associated with interface eth0, run: | |
1577 | ||
1578 | ovs-vsctl get Interface eth0 ofport | |
1579 | ||
1580 | You can print the entire mapping with: | |
1581 | ||
1582 | ovs-vsctl -- --columns=name,ofport list Interface | |
1583 | ||
1584 | but the output mixes together interfaces from all bridges in the | |
1585 | database, so it may be confusing if more than one bridge exists. | |
1586 | ||
1587 | In the Open vSwitch database, ofport value -1 means that the | |
1588 | interface could not be created due to an error. (The Open vSwitch | |
1589 | log should indicate the reason.) ofport value [] (the empty set) | |
1590 | means that the interface hasn't been created yet. The latter is | |
1591 | normally an intermittent condition (unless ovs-vswitchd is not | |
1592 | running). | |
7b287e99 | 1593 | |
542cc9bb | 1594 | ### Q: I added some flows with my controller or with ovs-ofctl, but when I |
af1ac4b9 BP |
1595 | run "ovs-dpctl dump-flows" I don't see them. |
1596 | ||
1597 | A: ovs-dpctl queries a kernel datapath, not an OpenFlow switch. It | |
1598 | won't display the information that you want. You want to use | |
1599 | "ovs-ofctl dump-flows" instead. | |
1600 | ||
542cc9bb | 1601 | ### Q: It looks like each of the interfaces in my bonded port shows up |
15d63ed3 BP |
1602 | as an individual OpenFlow port. Is that right? |
1603 | ||
1604 | A: Yes, Open vSwitch makes individual bond interfaces visible as | |
1605 | OpenFlow ports, rather than the bond as a whole. The interfaces | |
1606 | are treated together as a bond for only a few purposes: | |
1607 | ||
542cc9bb TG |
1608 | - Sending a packet to the OFPP_NORMAL port. (When an OpenFlow |
1609 | controller is not configured, this happens implicitly to | |
1610 | every packet.) | |
15d63ed3 | 1611 | |
542cc9bb | 1612 | - Mirrors configured for output to a bonded port. |
15d63ed3 BP |
1613 | |
1614 | It would make a lot of sense for Open vSwitch to present a bond as | |
1615 | a single OpenFlow port. If you want to contribute an | |
1616 | implementation of such a feature, please bring it up on the Open | |
1617 | vSwitch development mailing list at dev@openvswitch.org. | |
1618 | ||
542cc9bb | 1619 | ### Q: I have a sophisticated network setup involving Open vSwitch, VMs or |
bb955418 BP |
1620 | multiple hosts, and other components. The behavior isn't what I |
1621 | expect. Help! | |
1622 | ||
1623 | A: To debug network behavior problems, trace the path of a packet, | |
1624 | hop-by-hop, from its origin in one host to a remote host. If | |
1625 | that's correct, then trace the path of the response packet back to | |
1626 | the origin. | |
1627 | ||
1628 | Usually a simple ICMP echo request and reply ("ping") packet is | |
1629 | good enough. Start by initiating an ongoing "ping" from the origin | |
1630 | host to a remote host. If you are tracking down a connectivity | |
1631 | problem, the "ping" will not display any successful output, but | |
1632 | packets are still being sent. (In this case the packets being sent | |
1633 | are likely ARP rather than ICMP.) | |
1634 | ||
1635 | Tools available for tracing include the following: | |
1636 | ||
542cc9bb TG |
1637 | - "tcpdump" and "wireshark" for observing hops across network |
1638 | devices, such as Open vSwitch internal devices and physical | |
1639 | wires. | |
bb955418 | 1640 | |
542cc9bb TG |
1641 | - "ovs-appctl dpif/dump-flows <br>" in Open vSwitch 1.10 and |
1642 | later or "ovs-dpctl dump-flows <br>" in earlier versions. | |
1643 | These tools allow one to observe the actions being taken on | |
1644 | packets in ongoing flows. | |
bb955418 | 1645 | |
542cc9bb TG |
1646 | See ovs-vswitchd(8) for "ovs-appctl dpif/dump-flows" |
1647 | documentation, ovs-dpctl(8) for "ovs-dpctl dump-flows" | |
1648 | documentation, and "Why are there so many different ways to | |
1649 | dump flows?" above for some background. | |
bb955418 | 1650 | |
542cc9bb TG |
1651 | - "ovs-appctl ofproto/trace" to observe the logic behind how |
1652 | ovs-vswitchd treats packets. See ovs-vswitchd(8) for | |
1653 | documentation. You can out more details about a given flow | |
1654 | that "ovs-dpctl dump-flows" displays, by cutting and pasting | |
1655 | a flow from the output into an "ovs-appctl ofproto/trace" | |
1656 | command. | |
bb955418 | 1657 | |
542cc9bb TG |
1658 | - SPAN, RSPAN, and ERSPAN features of physical switches, to |
1659 | observe what goes on at these physical hops. | |
bb955418 BP |
1660 | |
1661 | Starting at the origin of a given packet, observe the packet at | |
1662 | each hop in turn. For example, in one plausible scenario, you | |
1663 | might: | |
1664 | ||
542cc9bb TG |
1665 | 1. "tcpdump" the "eth" interface through which an ARP egresses |
1666 | a VM, from inside the VM. | |
bb955418 | 1667 | |
542cc9bb TG |
1668 | 2. "tcpdump" the "vif" or "tap" interface through which the ARP |
1669 | ingresses the host machine. | |
bb955418 | 1670 | |
542cc9bb TG |
1671 | 3. Use "ovs-dpctl dump-flows" to spot the ARP flow and observe |
1672 | the host interface through which the ARP egresses the | |
1673 | physical machine. You may need to use "ovs-dpctl show" to | |
1674 | interpret the port numbers. If the output seems surprising, | |
1675 | you can use "ovs-appctl ofproto/trace" to observe details of | |
1676 | how ovs-vswitchd determined the actions in the "ovs-dpctl | |
1677 | dump-flows" output. | |
bb955418 | 1678 | |
542cc9bb TG |
1679 | 4. "tcpdump" the "eth" interface through which the ARP egresses |
1680 | the physical machine. | |
bb955418 | 1681 | |
542cc9bb TG |
1682 | 5. "tcpdump" the "eth" interface through which the ARP |
1683 | ingresses the physical machine, at the remote host that | |
1684 | receives the ARP. | |
bb955418 | 1685 | |
542cc9bb TG |
1686 | 6. Use "ovs-dpctl dump-flows" to spot the ARP flow on the |
1687 | remote host that receives the ARP and observe the VM "vif" | |
1688 | or "tap" interface to which the flow is directed. Again, | |
1689 | "ovs-dpctl show" and "ovs-appctl ofproto/trace" might help. | |
bb955418 | 1690 | |
542cc9bb TG |
1691 | 7. "tcpdump" the "vif" or "tap" interface to which the ARP is |
1692 | directed. | |
bb955418 | 1693 | |
542cc9bb TG |
1694 | 8. "tcpdump" the "eth" interface through which the ARP |
1695 | ingresses a VM, from inside the VM. | |
bb955418 BP |
1696 | |
1697 | It is likely that during one of these steps you will figure out the | |
1698 | problem. If not, then follow the ARP reply back to the origin, in | |
1699 | reverse. | |
1700 | ||
542cc9bb | 1701 | ### Q: How do I make a flow drop packets? |
0f5edef0 | 1702 | |
e5f1da19 BP |
1703 | A: To drop a packet is to receive it without forwarding it. OpenFlow |
1704 | explicitly specifies forwarding actions. Thus, a flow with an | |
1705 | empty set of actions does not forward packets anywhere, causing | |
1706 | them to be dropped. You can specify an empty set of actions with | |
1707 | "actions=" on the ovs-ofctl command line. For example: | |
0f5edef0 BP |
1708 | |
1709 | ovs-ofctl add-flow br0 priority=65535,actions= | |
1710 | ||
1711 | would cause every packet entering switch br0 to be dropped. | |
1712 | ||
1713 | You can write "drop" explicitly if you like. The effect is the | |
1714 | same. Thus, the following command also causes every packet | |
1715 | entering switch br0 to be dropped: | |
1716 | ||
1717 | ovs-ofctl add-flow br0 priority=65535,actions=drop | |
1718 | ||
e5f1da19 BP |
1719 | "drop" is not an action, either in OpenFlow or Open vSwitch. |
1720 | Rather, it is only a way to say that there are no actions. | |
1721 | ||
542cc9bb | 1722 | ### Q: I added a flow to send packets out the ingress port, like this: |
2fafc091 BP |
1723 | |
1724 | ovs-ofctl add-flow br0 in_port=2,actions=2 | |
1725 | ||
1726 | but OVS drops the packets instead. | |
1727 | ||
1728 | A: Yes, OpenFlow requires a switch to ignore attempts to send a packet | |
1729 | out its ingress port. The rationale is that dropping these packets | |
1730 | makes it harder to loop the network. Sometimes this behavior can | |
1731 | even be convenient, e.g. it is often the desired behavior in a flow | |
1732 | that forwards a packet to several ports ("floods" the packet). | |
1733 | ||
6620f928 JS |
1734 | Sometimes one really needs to send a packet out its ingress port |
1735 | ("hairpin"). In this case, output to OFPP_IN_PORT, which in | |
1736 | ovs-ofctl syntax is expressed as just "in_port", e.g.: | |
2fafc091 BP |
1737 | |
1738 | ovs-ofctl add-flow br0 in_port=2,actions=in_port | |
1739 | ||
1740 | This also works in some circumstances where the flow doesn't match | |
1741 | on the input port. For example, if you know that your switch has | |
1742 | five ports numbered 2 through 6, then the following will send every | |
1743 | received packet out every port, even its ingress port: | |
1744 | ||
1745 | ovs-ofctl add-flow br0 actions=2,3,4,5,6,in_port | |
1746 | ||
1747 | or, equivalently: | |
1748 | ||
1749 | ovs-ofctl add-flow br0 actions=all,in_port | |
1750 | ||
1751 | Sometimes, in complicated flow tables with multiple levels of | |
1752 | "resubmit" actions, a flow needs to output to a particular port | |
1753 | that may or may not be the ingress port. It's difficult to take | |
1754 | advantage of OFPP_IN_PORT in this situation. To help, Open vSwitch | |
1755 | provides, as an OpenFlow extension, the ability to modify the | |
1756 | in_port field. Whatever value is currently in the in_port field is | |
1757 | the port to which outputs will be dropped, as well as the | |
1758 | destination for OFPP_IN_PORT. This means that the following will | |
1759 | reliably output to port 2 or to ports 2 through 6, respectively: | |
1760 | ||
1761 | ovs-ofctl add-flow br0 in_port=2,actions=load:0->NXM_OF_IN_PORT[],2 | |
1762 | ovs-ofctl add-flow br0 actions=load:0->NXM_OF_IN_PORT[],2,3,4,5,6 | |
1763 | ||
1764 | If the input port is important, then one may save and restore it on | |
1765 | the stack: | |
1766 | ||
1767 | ovs-ofctl add-flow br0 actions=push:NXM_OF_IN_PORT[],\ | |
1768 | load:0->NXM_OF_IN_PORT[],\ | |
1769 | 2,3,4,5,6,\ | |
1770 | pop:NXM_OF_IN_PORT[] | |
1771 | ||
542cc9bb | 1772 | ### Q: My bridge br0 has host 192.168.0.1 on port 1 and host 192.168.0.2 |
d4ee72b4 BP |
1773 | on port 2. I set up flows to forward only traffic destined to the |
1774 | other host and drop other traffic, like this: | |
1775 | ||
1776 | priority=5,in_port=1,ip,nw_dst=192.168.0.2,actions=2 | |
1777 | priority=5,in_port=2,ip,nw_dst=192.168.0.1,actions=1 | |
1778 | priority=0,actions=drop | |
1779 | ||
1780 | But it doesn't work--I don't get any connectivity when I do this. | |
1781 | Why? | |
1782 | ||
1783 | A: These flows drop the ARP packets that IP hosts use to establish IP | |
1784 | connectivity over Ethernet. To solve the problem, add flows to | |
1785 | allow ARP to pass between the hosts: | |
1786 | ||
1787 | priority=5,in_port=1,arp,actions=2 | |
1788 | priority=5,in_port=2,arp,actions=1 | |
1789 | ||
1790 | This issue can manifest other ways, too. The following flows that | |
1791 | match on Ethernet addresses instead of IP addresses will also drop | |
1792 | ARP packets, because ARP requests are broadcast instead of being | |
1793 | directed to a specific host: | |
1794 | ||
1795 | priority=5,in_port=1,dl_dst=54:00:00:00:00:02,actions=2 | |
1796 | priority=5,in_port=2,dl_dst=54:00:00:00:00:01,actions=1 | |
1797 | priority=0,actions=drop | |
1798 | ||
1799 | The solution already described above will also work in this case. | |
1800 | It may be better to add flows to allow all multicast and broadcast | |
1801 | traffic: | |
1802 | ||
1803 | priority=5,in_port=1,dl_dst=01:00:00:00:00:00/01:00:00:00:00:00,actions=2 | |
1804 | priority=5,in_port=2,dl_dst=01:00:00:00:00:00/01:00:00:00:00:00,actions=1 | |
0f5edef0 | 1805 | |
542cc9bb | 1806 | ### Q: My bridge disconnects from my controller on add-port/del-port. |
9a7a9154 YT |
1807 | |
1808 | A: Reconfiguring your bridge can change your bridge's datapath-id because | |
1809 | Open vSwitch generates datapath-id from the MAC address of one of its ports. | |
1810 | In that case, Open vSwitch disconnects from controllers because there's | |
1811 | no graceful way to notify controllers about the change of datapath-id. | |
1812 | ||
1813 | To avoid the behaviour, you can configure datapath-id manually. | |
1814 | ||
1815 | ovs-vsctl set bridge br0 other-config:datapath-id=0123456789abcdef | |
1816 | ||
ae99ee45 BP |
1817 | ### Q: My controller is getting errors about "buffers". What's going on? |
1818 | ||
1819 | A: When a switch sends a packet to an OpenFlow controller using a | |
1820 | "packet-in" message, it can also keep a copy of that packet in a | |
1821 | "buffer", identified by a 32-bit integer "buffer_id". There are | |
1822 | two advantages to buffering. First, when the controller wants to | |
1823 | tell the switch to do something with the buffered packet (with a | |
1824 | "packet-out" OpenFlow request), it does not need to send another | |
1825 | copy of the packet back across the OpenFlow connection, which | |
1826 | reduces the bandwidth cost of the connection and improves latency. | |
1827 | This enables the second advantage: the switch can optionally send | |
1828 | only the first part of the packet to the controller (assuming that | |
1829 | the switch only needs to look at the first few bytes of the | |
1830 | packet), further reducing bandwidth and improving latency. | |
1831 | ||
1832 | However, buffering introduces some issues of its own. First, any | |
1833 | switch has limited resources, so if the controller does not use a | |
1834 | buffered packet, the switch has to decide how long to keep it | |
1835 | buffered. When many packets are sent to a controller and buffered, | |
1836 | Open vSwitch can discard buffered packets that the controller has | |
1837 | not used after as little as 5 seconds. This means that | |
1838 | controllers, if they make use of packet buffering, should use the | |
1839 | buffered packets promptly. (This includes sending a "packet-out" | |
1840 | with no actions if the controller does not want to do anything with | |
1841 | a buffered packet, to clear the packet buffer and effectively | |
1842 | "drop" its packet.) | |
1843 | ||
1844 | Second, packet buffers are one-time-use, meaning that a controller | |
1845 | cannot use a single packet buffer in two or more "packet-out" | |
1846 | commands. Open vSwitch will respond with an error to the second | |
1847 | and subsequent "packet-out"s in such a case. | |
1848 | ||
1849 | Finally, a common error early in controller development is to try | |
1850 | to use buffer_id 0 in a "packet-out" message as if 0 represented | |
1851 | "no buffered packet". This is incorrect usage: the buffer_id with | |
1852 | this meaning is actually 0xffffffff. | |
1853 | ||
1854 | ovs-vswitchd(8) describes some details of Open vSwitch packet | |
1855 | buffering that the OpenFlow specification requires implementations | |
1856 | to document. | |
1857 | ||
66679738 BP |
1858 | |
1859 | Development | |
1860 | ----------- | |
1861 | ||
542cc9bb | 1862 | ### Q: How do I implement a new OpenFlow message? |
66679738 BP |
1863 | |
1864 | A: Add your new message to "enum ofpraw" and "enum ofptype" in | |
1865 | lib/ofp-msgs.h, following the existing pattern. Then recompile and | |
1866 | fix all of the new warnings, implementing new functionality for the | |
1867 | new message as needed. (If you configure with --enable-Werror, as | |
9feb1017 | 1868 | described in [INSTALL.md], then it is impossible to miss any warnings.) |
66679738 BP |
1869 | |
1870 | If you need to add an OpenFlow vendor extension message for a | |
1871 | vendor that doesn't yet have any extension messages, then you will | |
1872 | also need to edit build-aux/extract-ofp-msgs. | |
1873 | ||
fe540ca9 BP |
1874 | ### Q: How do I add support for a new field or header? |
1875 | ||
1876 | A: Add new members for your field to "struct flow" in lib/flow.h, and | |
1877 | add new enumerations for your new field to "enum mf_field_id" in | |
f58df860 BP |
1878 | lib/meta-flow.h, following the existing pattern. Also, add support |
1879 | to miniflow_extract() in lib/flow.c for extracting your new field | |
1880 | from a packet into struct miniflow. Then recompile and fix all of | |
1881 | the new warnings, implementing new functionality for the new field | |
1882 | or header as needed. (If you configure with --enable-Werror, as | |
1883 | described in [INSTALL.md], then it is impossible to miss any | |
1884 | warnings.) | |
1885 | ||
1886 | If you want kernel datapath support for your new field, you also | |
1887 | need to modify the kernel module for the operating systems you are | |
1888 | interested in. This isn't mandatory, since fields understood only | |
1889 | by userspace work too (with a performance penalty), so it's | |
1890 | reasonable to start development without it. If you implement | |
1891 | kernel module support for Linux, then the Linux kernel "netdev" | |
1892 | mailing list is the place to submit that support first; please read | |
1893 | up on the Linux kernel development process separately. The Windows | |
1894 | datapath kernel module support, on the other hand, is maintained | |
1895 | within the OVS tree, so patches for that can go directly to | |
1896 | ovs-dev. | |
fe540ca9 BP |
1897 | |
1898 | ### Q: How do I add support for a new OpenFlow action? | |
1899 | ||
1900 | A: Add your new action to "enum ofp_raw_action_type" in | |
1901 | lib/ofp-actions.c, following the existing pattern. Then recompile | |
1902 | and fix all of the new warnings, implementing new functionality for | |
1903 | the new action as needed. (If you configure with --enable-Werror, | |
1904 | as described in [INSTALL.md], then it is impossible to miss any | |
1905 | warnings.) | |
1906 | ||
1907 | If you need to add an OpenFlow vendor extension action for a vendor | |
1908 | that doesn't yet have any extension actions, then you will also | |
1909 | need to edit build-aux/extract-ofp-actions. | |
1910 | ||
66679738 | 1911 | |
c483d489 BP |
1912 | Contact |
1913 | ------- | |
1914 | ||
1915 | bugs@openvswitch.org | |
1916 | http://openvswitch.org/ | |
9feb1017 TG |
1917 | |
1918 | [PORTING.md]:PORTING.md | |
1919 | [WHY-OVS.md]:WHY-OVS.md | |
1920 | [INSTALL.md]:INSTALL.md | |
1921 | [OPENFLOW-1.1+.md]:OPENFLOW-1.1+.md | |
77c180ce | 1922 | [INSTALL.DPDK.md]:INSTALL.DPDK.md |