]>
Commit | Line | Data |
---|---|---|
de4a643f | 1 | * Changes in Quagga 0.98.0 |
2 | ||
73a7dea3 | 3 | - Logging facilities upgraded. One can now specify a severity level |
4 | for each logging destination. And a new "show logging" command gives | |
5 | thorough information on the current logging system configuration. | |
6 | ||
8035e9f0 | 7 | - Watchquagga daemon added. This is not well tested yet. Please try |
8 | monitor mode first before enabling restart features. It is important | |
9 | to make sure that the various timers are configured with appropriate | |
10 | values for your site. | |
11 | ||
14c17fd8 | 12 | - BGP route-server support added. See the texinfo documentation. |
13 | ||
de4a643f | 14 | - OSPF API initialisation is disabled by default even if compiled in. You |
15 | can enable it with -a/--apiserver command line switch. | |
8694b9f6 | 16 | |
9a3805e0 | 17 | - "write-config integrated" vtysh command replaced with "service |
18 | integrated-vtysh-config" command. | |
19 | ||
20 | - Router id is now handled by zebra daemon and all daemons receive changes | |
21 | from it. Router id can be overriden in daemons' configurations of course. | |
22 | To fix common router id in zebra daemon you can either install non-127 | |
23 | address on loopback or use "router-id x.x.x.x" command. | |
24 | ||
25 | - "secondary" keyword is removed from ip address configuration. All | |
26 | supported OS'es have their own vision what's secondary address and | |
27 | how to handle it. | |
28 | ||
3e0b3a56 | 29 | - Zebra no longer enables forwarding by default. If you rely on zebra to |
30 | enable forwarding make sure to add '<ip|ip6> forwarding' statements | |
31 | to your zebra configuration file. | |
32 | ||
79683de8 | 33 | - All libraries are built and used shared, on platforms where libtool |
34 | supports shared libraries. | |
35 | ||
8694b9f6 | 36 | - Router advertisement syntax is changed. In usual cases (if you didn't do |
37 | any fancy stuff) it's enough to change lines in configuration from: | |
38 | "ipv6 nd prefix-advertisement X:X:X:X::/X 2592000 604800 autoconfig on-link" | |
39 | to: | |
40 | "ipv6 nd prefix X:X:X:X::/X" | |
41 | ||
42 | All router advertisement options are documented in texi documentation. | |
43 | ||
44 | - --enable-nssa configure switch is removed. NSSA support is stable enough. | |
45 | ||
46 | - Daemons don't look at current directory for config file any more. | |
47 | ||
af273652 | 48 | * Changes in Quagga 0.96.5 |
49 | ||
50 | - include files are installed in $(prefix)/include/quagga. Programs | |
51 | building against these includes should -I$(prefix)/include and e.g. | |
52 | #include <quagga/routemap.h> | |
53 | ||
54 | - New option --enable-exampledir puts example files in a separate | |
55 | directory from $(sysconfdir), easing NetBSD pkgsrc hierarchy rules | |
56 | compliance. | |
57 | ||
aa593d5e | 58 | - New configure options --enable-configfile-mask and |
59 | --enable-logfile-mask to set umask values for config and log | |
60 | values. Masks default to 0600, matching previous behavior. | |
61 | ||
9e867fe6 | 62 | - Import current CVS isisd from SourceForge, then merge it with |
63 | the Quagga's Framework. | |
64 | ||
291eb0ec | 65 | * Changes in Quagga 0.96.4 |
66 | ||
67 | - Further fixes to ospfd, some relating to the PtP revert. Interface | |
68 | lookups should be a lot more robust now. | |
69 | ||
70 | - Fix for a remote triggerable crash in vty layer. | |
71 | ||
72 | - Improvements to ripd, and addition of split horizon support. | |
73 | ||
74 | - Improved bgpd table support, now dumps at time of day intervals rather | |
75 | than time from startup intervals. Much improved support for IPv6 table | |
76 | dumps. show commands for views improved. | |
77 | ||
5ae016ee | 78 | * Changes in Quagga 0.96.3 |
79 | ||
80 | - revert the 'generic PtP' patch. Means Quagga will no longer work with | |
81 | FreeSWAN, however, on the plus side this gets rid of a lot of niggly bugs | |
82 | which the PtP patch introduced. | |
83 | ||
9491975e | 84 | * Changes in Quagga 0.96.2 |
85 | ||
86 | - Fix crash in ospfd | |
87 | ||
88 | * Changes in Quagga 0.96.1 | |
89 | ||
90 | - Iron out problem with the privileges definitions | |
91 | ||
92 | * Changes in Quagga 0.96 | |
93 | ||
94 | - Privilege support, daemons now run with the minimal privileges needed, see | |
95 | the documentation for details. | |
96 | ||
97 | - NSSA ABR support in ospfd. | |
98 | ||
99 | - OSPF-API support merged in. | |
100 | ||
101 | - 6WIND patch merged in. | |
718e3744 | 102 | |
103 | * Changes in zebra-0.93 | |
104 | ||
105 | * Changes in bgpd | |
106 | ||
107 | ** Configuration is changed to new format. | |
108 | ||
109 | * Changes in ospfd | |
110 | ||
111 | ** Crush bugs which reported on Zebra ML is fixed. | |
112 | ||
113 | ** Opaque LSA and TE LSA support is added by KDD R&D Laboratories, | |
114 | Inc. | |
115 | ||
116 | * Chages in ospf6d | |
117 | ||
118 | ** Many bugs are fixed. | |
119 | \f | |
120 | * Changes in zebra-0.92a | |
121 | ||
122 | * Changes in bgpd | |
123 | ||
124 | ** Fix "^$" community list bug. | |
125 | ||
126 | ** Below command's Address Family specific configurations are added | |
127 | ||
128 | nexthop-self | |
129 | route-reflector-client | |
130 | route-server-client | |
131 | soft-reconfiguration inbound | |
132 | ||
133 | * Changes in zebra | |
134 | ||
135 | ** Treat kernel type routes as EGP routes. | |
136 | \f | |
137 | * Changes in zebra-0.92 | |
138 | ||
139 | ** Overall security is improved. Default umask is 0077. | |
140 | ||
141 | * Changes in ripd | |
142 | ||
143 | ** If output interface is in simple password authentication mode, | |
144 | substruct one from rtemax. | |
145 | ||
146 | * Changes in bgpd | |
147 | ||
148 | ** IPv4 multicast and IPv6 unicast configuration is changed to so | |
149 | called new config. All of AFI and SAFI specific configuration is | |
150 | moved to "address-family" node. When you have many IPv6 only | |
151 | configuration, you will see many "no neighbor X:X::X:X activate" line | |
152 | in your configuration to disable IPv4 unicast NLRI exchange. In that | |
153 | case please use "no bgp default ipv4-unicast" command to suppress the | |
154 | output. Until zebra-0.93, old config is still left for compatibility. | |
155 | ||
156 | Old config | |
157 | ========== | |
158 | router bgp 7675 | |
159 | bgp router-id 10.0.0.1 | |
160 | redistribute connected | |
161 | network 192.168.0.0/24 | |
162 | neighbor 10.0.0.2 remote-as 7675 | |
163 | ipv6 bgp network 3ffe:506::/33 | |
164 | ipv6 bgp network 3ffe:1800:e800::/40 | |
165 | ipv6 bgp aggregate-address 3ffe:506::/32 | |
166 | ipv6 bgp redistribute connected | |
167 | ipv6 bgp neighbor 3ffe:506:1000::2 remote-as 1 | |
168 | ||
169 | New config | |
170 | ========== | |
171 | router bgp 7675 | |
172 | bgp router-id 10.0.0.1 | |
173 | network 192.168.0.0/24 | |
174 | redistribute connected | |
175 | neighbor 10.0.0.2 remote-as 7675 | |
176 | neighbor 3ffe:506:1000::2 remote-as 1 | |
177 | no neighbor 3ffe:506:1000::2 activate | |
178 | ! | |
179 | address-family ipv6 | |
180 | network 3ffe:506::/33 | |
181 | network 3ffe:1800:e800::/40 | |
182 | aggregate-address 3ffe:506::/32 | |
183 | redistribute connected | |
184 | neighbor 3ffe:506:1000::2 activate | |
185 | exit-address-family | |
186 | ||
187 | * Changes in ospfd | |
188 | ||
189 | ** Internal interface treatment is changed. Now ospfd can handle | |
190 | multiple IP address for an interface. | |
191 | ||
192 | ** Redistribution of loopback interface's address works fine. | |
193 | \f | |
194 | * Changes in zebra-0.91 | |
195 | ||
196 | ** --enable-oldrib configure option is removed. | |
197 | ||
198 | ** HAVE_IF_PSEUDO part is removed. Same feature is now supported by | |
199 | default. | |
200 | ||
201 | * Changes in ripd | |
202 | ||
203 | ** When redistributed route is withdrawn, perform poisoned reverse. | |
204 | ||
205 | * Changes in zebra | |
206 | ||
207 | ** When interface's address is removed, kernel route pointing out to | |
208 | the address is removed. | |
209 | ||
210 | ** IPv6 RIB is now based upon new RIB code. | |
211 | ||
212 | ** zebra can handle same connected route to one interface. | |
213 | ||
214 | ** New command for interface address. Currently this commands are | |
215 | only supported on GNU/Linux with netlink interface. | |
216 | ||
217 | "ip address A.B.C.D secondary" | |
218 | "ip address A.B.C.D label LABEL" | |
219 | ||
220 | * Changes in bgpd | |
221 | ||
222 | ** BGP flap dampening bugs are fixed. | |
223 | ||
224 | ** BGP non-blocking TCP connection bug is fixed. | |
225 | ||
226 | ** "show ip bgp summary" shows AS path and community entry number. | |
227 | ||
228 | ** New commands have been added. | |
229 | "show ip bgp cidr-only" | |
230 | "show ip bgp ipv4 (unicast|multicast) cidr-only" | |
231 | "show ip bgp A.B.C.D/M longer-prefixes" | |
232 | "show ip bgp ipv4 (unicast|multicast) A.B.C.D/M longer-prefixes" | |
233 | "show ipv6 bgp X:X::X:X/M longer-prefixes" | |
234 | "show ipv6 mbgp X:X::X:X/M longer-prefixes" | |
235 | ||
236 | ** IPv6 IBGP nexthop change is monitored. | |
237 | ||
238 | ** Unknown transitive attribute is passed with partial flag bit on. | |
239 | ||
240 | * Changes in ospfd | |
241 | ||
242 | ** Fix bug of LSA MaxAge flood. | |
243 | ||
244 | ** Fix bug of NSSA codes. | |
245 | \f | |
246 | * Changes in zebra-0.90 | |
247 | ||
248 | ** From this beta release, --enable-unixdomain and --enable-newrib | |
249 | becomes default. So both options are removed from configure.in. To | |
250 | revert old behavior please specify below option. | |
251 | ||
252 | --enable-tcp-zebra # TCP/IP socket is used for protocol daemon and zebra. | |
253 | --enable-oldrib # Turn on old RIB implementation. | |
254 | ||
255 | Old RIB implementation will be removed in zebra-0.91. | |
256 | ||
257 | ** From this beta release --enable-multipath is supported. This | |
258 | option is only effective on GNU/Linux kernel with | |
259 | CONFIG_IP_ADVANCED_ROUTER and CONFIG_IP_ROUTE_MULTIPATH is set. | |
260 | ||
261 | --enable-multipath=ARG # ARG must be digit. When ARG is 0 unlimit multipath number. | |
262 | ||
263 | ** From this release we do not include guile files. | |
264 | ||
265 | * Changes in lib | |
266 | ||
267 | ** newlist.[ch] is merged with linklist.[ch]. | |
268 | ||
269 | ** Now Zebra works on MacOS X public beta. | |
270 | ||
271 | ** Access-list can have remark. "access-list WORD remark LINE" define | |
272 | remark for specified access-list. | |
273 | ||
274 | ** Key of key-chain is sorted by it's idetifier value. | |
275 | ||
276 | ** prefix-list rule is slightly changed. The rule of "len <= ge-value | |
277 | <= le-value" is changed to "len < ge-value <= le-value". | |
278 | ||
279 | ** According to above prefix-list rule change, add automatic | |
280 | conversion function of an old rule. ex.) 10.0.0.0/8 ge 8 -> 10.0.0.0/8 | |
281 | le 32 | |
282 | ||
283 | ** SMUX can handle SNMP trap. | |
284 | ||
285 | ** In our event library, event thread is executed before any other | |
286 | thread like timer, read and write event. | |
287 | ||
288 | ** Robust method for writing configuration file and recover from | |
289 | backing up config file. | |
290 | ||
291 | ** Display "end" at the end of configuration. | |
292 | ||
293 | ** Fix memory leak in vtysh_read(). | |
294 | ||
295 | ** Fix memroy leak about access-list and prefix-list name. | |
296 | ||
297 | * Changes in zebra | |
298 | ||
299 | ** UNIX domain socket server of zebra protocol is added. | |
300 | ||
301 | ** Fix PointoPoint interface network bug. The destination network | |
302 | should be installed into routing table instead of local network. | |
303 | ||
304 | ** Metric value is reflected to kernel routing table. | |
305 | ||
306 | ** "show ip route" display uptime of RIP,OSPF,BGP routes. | |
307 | ||
308 | ** New RIB implementation is added. | |
309 | ||
310 | Now we have enhanced RIB (routing information base) implementation in | |
311 | zebra. New RIB has many new features and fixed some bugs which exist | |
312 | in old RIB code. | |
313 | ||
314 | *** Static route with distance value | |
315 | ||
316 | Static route can be specified with administrative distance. The | |
317 | distance value 255 means it is not installed into the kernel. | |
318 | Default value of distance for static route is 1. | |
319 | ||
320 | ip route A.B.C.D/M A.B.C.D <1-255> | |
321 | ip route A.B.C.D/M IFNAME <1-255> | |
322 | ||
323 | If the least distance value's route's nexthop are unreachable, | |
324 | select the least distance value route which has reachable nexthop is | |
325 | selected. | |
326 | ||
327 | ip route 0.0.0.0/0 10.0.0.1 | |
328 | ip route 0.0.0.0/0 11.0.0.1 2 | |
329 | ||
330 | In this case, when 10.0.0.1 is unreachable and 11.0.0.1 is | |
331 | reachable. The route with nexthop 11.0.0.1 will be installed into | |
332 | forwarding table. | |
333 | ||
334 | zebra> show ip route | |
335 | S>* 0.0.0.0/0 [2/0] via 11.0.0.1 | |
336 | S 0.0.0.0/0 [1/0] via 10.0.0.1 inactive | |
337 | ||
338 | If the nexthop is unreachable "inactive" is displayed. You can | |
339 | specify any string to IFNAME. There is no need of the interface is | |
340 | there when you configure the route. | |
341 | ||
342 | ip route 1.1.1.1/32 ppp0 | |
343 | ||
344 | When ppp0 comes up, the route is installed properly. | |
345 | ||
346 | *** Multiple nexthop routes for one prefix | |
347 | ||
348 | Multiple nexthop routes can be specified for one prefix. Even the | |
349 | kernel support only one nexthop for one prefix user can configure | |
350 | multiple nexthop. | |
351 | ||
352 | When you configure routes like below, prefix 10.0.0.1 has three | |
353 | nexthop. | |
354 | ||
355 | ip route 10.0.0.1/32 10.0.0.2 | |
356 | ip route 10.0.0.1/32 10.0.0.3 | |
357 | ip route 10.0.0.1/32 eth0 | |
358 | ||
359 | If there is no route to 10.0.0.2 and 10.0.0.3. And interface eth0 | |
360 | is reachable, then the last route is installed into the kernel. | |
361 | ||
362 | zebra> show ip route | |
363 | S> 10.0.0.1/32 [1/0] via 10.0.0.2 inactive | |
364 | via 10.0.0.3 inactive | |
365 | * is directly connected, eth0 | |
366 | ||
367 | '*' means this nexthop is installed into the kernel. | |
368 | ||
369 | *** Multipath (more than one nexthop for one prefix) can be installed into the kernel. | |
370 | ||
371 | When the kernel support multipath, zebra can install multipath | |
372 | routes into the kernel. Before doing that please make it sure that | |
373 | setting --enable-multipath=ARG to configure script. ARG must be digit | |
374 | value. When specify 0 to ARG, there is no limitation of the number | |
375 | of the multipath. Currently only GNU/Linux with netlink interface is | |
376 | supported. | |
377 | ||
378 | ip route 10.0.0.1/32 10.0.0.2 | |
379 | ip route 10.0.0.1/32 10.0.0.3 | |
380 | ip route 10.0.0.1/32 eth0 | |
381 | ||
382 | zebra> show ip route | |
383 | S>* 10.0.0.1/32 [1/0] via 10.0.0.2 | |
384 | * via 10.0.0.3 | |
385 | is directly connected, eth0 | |
386 | ||
387 | *** Kernel message delete installed route. | |
388 | ||
389 | After zebra install static or dynamic route into the kernel. | |
390 | ||
391 | R>* 0.0.0.0/0 [120/3] via 10.0.0.1 | |
392 | ||
393 | If you delete this route outside zebra, old zebra does not reinstall | |
394 | route again. Now the route is re-processed and properly reinstall the | |
395 | static or dynamic route into the kernel. | |
396 | ||
397 | ** GNU/Linux netlink socket handling is improved to fix race condition | |
398 | between kernel message and user command responce. | |
399 | ||
400 | * Changes in bgpd | |
401 | ||
402 | ** Add show neighbor's routes command. | |
403 | ||
404 | "show ip bgp neighbors (A.B.C.D|X:X::X:X) routes" | |
405 | "show ip bgp ipv4 (unicast|multicast) neighbors (A.B.C.D|X:X::X:X) routes" | |
406 | "show ipv6 bgp neighbors (A.B.C.D|X:X::X:X) routes" | |
407 | "show ipv6 mbgp neighbors (A.B.C.D|X:X::X:X) routes" | |
408 | ||
409 | ** BGP passive peer support problem is fixed. | |
410 | ||
411 | ** Redistributed IGP nexthop is passed to BGP nexthop. | |
412 | ||
413 | ** On multiaccess media, if the nexthop is reachable nexthop is passed | |
414 | as it is. | |
415 | ||
416 | ** Remove zebra-0.88 compatibility commands. | |
417 | ||
418 | "match ip prefix-list WORD" | |
419 | "match ipv6 prefix-list WORD" | |
420 | ||
421 | Instead of above please use below commands. | |
422 | ||
423 | "match ip address prefix-list WORD" | |
424 | "match ipv6 address prefix-list WORD" | |
425 | ||
426 | ** Fix bug of holdtimer is not reset when bgp cleared. | |
427 | ||
428 | ** "show ip bgp summary" display peer establish/drop count. | |
429 | ||
430 | ** Change "match ip next-hop" argument from IP address to access-list | |
431 | name. | |
432 | ||
433 | ** When "bgp enforce-first-as" is enabled, check EBGP peer's update | |
434 | has it's AS number in the first AS number in AS sequence. | |
435 | ||
436 | ** New route-map command "set community-delete COMMUNITY-LIST" is | |
437 | added. Community matched the CoMMUNITY-LIST is removed from the | |
438 | community. | |
439 | ||
440 | ** BGP-MIB implementation is finished. | |
441 | ||
442 | ** When BGP connection comes from unconfigured IP address, close | |
443 | socket immediately. | |
444 | ||
445 | ** Do not compare router ID when the routes comes from EBGP peer. | |
446 | When originator ID is same, take shorter cluster-list route. If | |
447 | cluster-list is same take smaller IP address neighbor's route. | |
448 | ||
449 | ** Add "bgp bestpath as-path ignore" command. When this option is | |
450 | set, do not concider AS path length when route selection. | |
451 | ||
452 | ** Add "bgp bestpath compare-routerid". When this option is set, | |
453 | compare router ID when the routes comes from EBGP peer. | |
454 | ||
455 | ** Add "bgp deterministic-med" process. | |
456 | ||
457 | ** BGP flap dampening feature is added. | |
458 | ||
459 | ** When IBGP nexthop is changed, it is reflected to RIB. | |
460 | ||
461 | ** Change "neighbor route-refresh" command to "neighbor capability | |
462 | route-refresh". | |
463 | ||
464 | * Changes in ripd | |
465 | ||
466 | ** Change "match ip next-hop" argument from IP address to access-list | |
467 | name. | |
468 | ||
469 | ** "no ip rip (send|receive)" command accept version number argument. | |
470 | ||
471 | ** Memory leak related classfull network generation is fixed. | |
472 | ||
473 | ** When a route is in garbage collection process (invalid with metric | |
474 | 16) and a router receives the same route with valid metric then route | |
475 | was not installed into zebra rib, but only into ripd rib. Moreover , | |
476 | it will never get into zebra rib, because ripd wrongly assumes it's | |
477 | already there. | |
478 | ||
479 | * Change in ospfd | |
480 | ||
481 | ** Fix bug of refreshing default route. | |
482 | ||
483 | ** --enable-nssa turn on undergoing NSSA feature. | |
484 | ||
485 | ** Fix bug of Hello packet's option is not properly set when interface | |
486 | comes up. | |
487 | ||
488 | ** Reduce unconditional logging. | |
489 | ||
490 | ** Add nexthop to OSPF path only when it is not there. | |
491 | ||
492 | ** When there is no DR on network (suppose you have only one router | |
493 | with interface priority 0). It's router LSA does not contain the link | |
494 | information about this network. | |
495 | ||
496 | ** When you change a priority of interface from/to 0 | |
497 | ISM_NeighborChange event should be scheduled in order to elect new | |
498 | DR/BDR on the network. | |
499 | ||
500 | ** When we add some LSA into retransmit list we need to check whether | |
501 | the present old LSA in retransmit list is not more recent than the new | |
502 | one. | |
503 | ||
504 | ** In states Loading and Full the slave must resend its last Database | |
505 | Description packet in response to duplicate Database Description | |
506 | packets received from the master. For this reason the slave must wait | |
507 | RouterDeadInterval seconds before freeing the last Database | |
508 | Description packet. Reception of a Database Description packet from | |
509 | the master after this interval will generate a SeqNumberMismatch | |
510 | neighbor event. RFC2328 Section 10.8 | |
511 | ||
512 | ** Virtual link can not configured in stub area. | |
513 | ||
514 | ** Clear a ls_upd_queue queue of the interface when interface goes | |
515 | down. | |
516 | ||
517 | ** "no router ospf" unregister redistribution requests from zebra. | |
518 | ||
519 | ** New command for virtual-link configuration is added. | |
520 | ||
521 | "area A.B.C.D virtual-link A.B.C.D" | |
522 | "area A.B.C.D virtual-link A.B.C.D hello-interval <1-65535> retransmit-interval <3-65535> transmit-delay <1-65535> dead-interval <1-65535>" | |
523 | "area A.B.C.D virtual-link A.B.C.D hello-interval <1-65535> retransmit-interval <3-65535> transmit-delay <1-65535> dead-interval <1-65535> authentication-key AUTH_KEY" | |
524 | "area A.B.C.D virtual-link A.B.C.D authentication-key AUTH_KEY" | |
525 | "area A.B.C.D virtual-link A.B.C.D hello-interval <1-65535> retransmit-interval <3-65535> transmit-delay <1-65535> dead-interval <1-65535> message-digest-key <1-255> md5 KEY" | |
526 | "area A.B.C.D virtual-link A.B.C.D message-digest-key <1-255> md5 KEY" | |
527 | ||
528 | ** Clear cryptographic sequence number when neighbor status is changed | |
529 | to NSM down. | |
530 | ||
531 | ** Make Summary LSA's origination and refreshment as same as other | |
532 | type of LSA. | |
533 | ||
534 | ** New OSPF pakcet read method. Now maximum packet length may be 65535 | |
535 | bytes (maximum IP packet length). | |
536 | ||
537 | ** Checking the age of the found LSA and if the LSA is MAXAGE we | |
538 | should call refresh instead of originate. | |
539 | ||
540 | ** Install multipath information to zebra. | |
541 | ||
542 | ** Fix socket descriptor leak when system call failed. | |
543 | ||
544 | * Changes in ospf6d | |
545 | ||
546 | ** Whole functionality has been rewritten as new code. new command | |
547 | "show ipv6 ospf6 spf node", "show ipv6 ospf6 spf tree", "show ipv6 | |
548 | ospf6 spf table" has been added. | |
549 | ||
550 | ** Change to do not send garbage route whose nexthop is not linklocal | |
551 | address. | |
552 | ||
553 | ** "redistribute ospf6" was generated in "router ospf6" in config | |
554 | file. It is fixed. | |
555 | ||
556 | ** LSDB sync bug is fixed. | |
557 | ||
558 | ** Fix bug of using unavailable route. | |
559 | ||
560 | * Changes in vtysh | |
561 | ||
562 | ** route-map and access-list configuration is merged into one | |
563 | configuration. | |
564 | ||
565 | ** /usr/local/etc/Zebra.conf is integrated configuration file. "write | |
566 | memory" in vtysh will write whole configuration to this file. | |
567 | ||
568 | ** When -b option is specified to vtysh, vtysh read | |
569 | /usr/local/etc/Zebra.conf file then pass the confuguration to proper | |
570 | protocol daemon. So make all protocol daemon's configuration file | |
571 | empty then invoke all daemon. After that vtysh -b will setup saved | |
572 | configuration. | |
573 | ||
574 | zebrastart.sh | |
575 | ============= | |
576 | /usr/local/sbin/zebra -d | |
577 | /usr/local/sbin/ripd -d | |
578 | /usr/local/sbin/ospfd -d | |
579 | /usr/local/sbin/bgpd -d | |
580 | /usr/local/bin/vtysh -b | |
581 | \f | |
582 | * Changes in zebra-0.89 | |
583 | ||
584 | * Changes in lib | |
585 | ||
586 | ** distribute-list can set all interface's access-list and prefix-list | |
587 | configuration. | |
588 | ||
589 | * Changes in ripd | |
590 | ||
591 | ** "show ip protocols" display proper distribute-list settings and | |
592 | distance settings. | |
593 | ||
594 | ** When metric infinity route received withdraw the route from kernel | |
595 | immediately it used to be wait garbage collection. | |
596 | ||
597 | ** key-chain can be used for simple password authentication. | |
598 | ||
599 | ** RIPv2 MIB getnext interface bug is fixed. | |
600 | ||
601 | * Changes in vtysh | |
602 | ||
603 | ** --with-libpam enable PAM authentication for vtysh. | |
604 | ||
605 | ** Now vtysh read vtysh.conf. This file should be | |
606 | ${SYSCONFDIR}/etc/vtysh.conf for security reason. Usually it is | |
607 | /usr/local/etc/vtysh.conf. | |
608 | ||
609 | ** "username WORD nopassword" command is added to vtysh. | |
610 | ||
611 | * Chagees in ospfd | |
612 | ||
613 | ** NBMA interface support is added. | |
614 | ||
615 | ** OSPF area is sorted by area ID. | |
616 | ||
617 | ** New implementation of OSPF refreesh. | |
618 | ||
619 | ** OSPF-MIB read function is partly added. | |
620 | ||
621 | * Changes in bgpd | |
622 | ||
623 | ** When the peering is done by ebgp-multihop, nexthop is looked up | |
624 | like IBGP routes. | |
625 | ||
626 | ** "show ip mbgp" commands are changed to "show ip bgp ipv4 | |
627 | multicast". | |
628 | ||
629 | ** New terminal commands are added. | |
630 | "show ip bgp ipv4 (unicast|multicast) filter-list WORD" | |
631 | "show ip bgp ipv4 (unicast|multicast) community" | |
632 | "show ip bgp ipv4 (unicast|multicast) community-list WORD" | |
633 | "show ip bgp ipv4 (unicast|multicast) community-list WORD exact-match" | |
634 | ||
635 | ** MBGP soft-reconfiguration command is added. | |
636 | "clear ip bgp x.x.x.x ipv4 (unicast|multicast) in" | |
637 | "clear ip bgp x.x.x.x ipv4 (unicast|multicast) out" | |
638 | "clear ip bgp x.x.x.x ipv4 (unicast|multicast) soft" | |
639 | "clear ip bgp <1-65535> ipv4 (unicast|multicast) in" | |
640 | "clear ip bgp <1-65535> ipv4 (unicast|multicast) out" | |
641 | "clear ip bgp <1-65535> ipv4 (unicast|multicast) soft" | |
642 | "clear ip bgp * ipv4 (unicast|multicast) in" | |
643 | "clear ip bgp * ipv4 (unicast|multicast) out" | |
644 | "clear ip bgp * ipv4 (unicast|multicast) soft" | |
645 | ||
646 | ** MED related commands are added. | |
647 | "bgp deterministic-med" | |
648 | "bgp bestpath med confed" | |
649 | "bgp bestpath med missing-as-worst" | |
650 | ||
651 | ** "bgp default local-preference" command is added. | |
652 | ||
653 | ** BGP confederation peer's routes are passed to zebra like IBGP route. | |
654 | ||
655 | ** Community match command is added. | |
656 | "show ip bgp community <val>" | |
657 | "show ip bgp community <val> exact-match" | |
658 | ||
659 | ** EBGP multihop route treatment bug is fixed. Now nexthop is | |
660 | resolved by IGP routes. | |
661 | ||
662 | ** Some commands are added to show routes by filter-list and community | |
663 | value. | |
664 | "show ip bgp ipv4 (unicast|multicast) filter-list WORD" | |
665 | "show ip bgp ipv4 (unicast|multicast) community" | |
666 | "show ip bgp ipv4 (unicast|multicast) community-list WORD" | |
667 | "show ip bgp ipv4 (unicast|multicast) community-list WORD exact-match" | |
668 | ||
669 | * Changes in zebra | |
670 | ||
671 | ** zebra read interface's address information using getifaddrs() when | |
672 | it is available. | |
673 | ||
674 | ** Reflect IPv6 interface's address change to protocol daemons. | |
675 | \f | |
676 | * Changes in zebra-0.88 | |
677 | ||
678 | * Changes in lib | |
679 | ||
680 | ** "exact-match" option is added to "access-list" and "ipv6 | |
681 | access-list" command. If this option is specified, the prefix and | |
682 | prefix length is compared as exact match mode. | |
683 | ||
684 | * Changes in zebra | |
685 | ||
686 | ** New Zebra message ZEBRA_REDISTRIBUTE_DEFAULT_ADD and | |
687 | ZEBRA_REDISTRIBUTE_DEFAULT_DELTE are added. | |
688 | ||
689 | ** Default administrative distance value is changed. | |
690 | ||
691 | Old New | |
692 | ------------------------------------------ | |
693 | system 10 0 | |
694 | kernel 20 0 | |
695 | connected 30 0 | |
696 | static 40 1 | |
697 | rip 50 120 | |
698 | ripng 50 120 | |
699 | ospf 60 110 | |
700 | ospf6 49 110 | |
701 | bgp 70 200(iBGP) 20(eBGP) | |
702 | ------------------------------------------ | |
703 | ||
704 | ** Distance value can be passed from protocol daemon to zebra. | |
705 | ||
706 | ** "show ip route" shows [metric/distance] value pair. | |
707 | ||
708 | ** Zebra Protocol is changed to support multi-path route and distance | |
709 | value. | |
710 | ||
711 | * Changes in ospfd | |
712 | ||
713 | ** "default-information originate [always]" command is added. | |
714 | ||
715 | ** "default-metric <0-16777214>" command is added. | |
716 | ||
717 | ** "show ip ospf database" command is integrated. LS-ID and AdvRouter can | |
718 | be specifed. The commands are | |
719 | ||
720 | show ip ospf database TYPE LS-ID | |
721 | show ip ospf database TYPE LS-ID ADV-ROUTER | |
722 | show ip ospf database TYPE LS-ID self-originate | |
723 | show ip ospf database TYPE self-originate | |
724 | ||
725 | ** route-map support for `redistribute' command are added. | |
726 | Supported `match' statements are | |
727 | ||
728 | match interface | |
729 | match ip address | |
730 | match next-hop | |
731 | ||
732 | Supported `set' statements are | |
733 | ||
734 | set metric | |
735 | set metric-type | |
736 | ||
737 | ** Pass OSPF metric value to zebra daemon. | |
738 | ||
739 | * Changes in ripd | |
740 | ||
741 | ** When specified route-map does not exist, it means all deny. | |
742 | ||
743 | ** "default-metric <1-16>" command is added. | |
744 | ||
745 | ** "offset-list ACCESS-LIST-NAME <0-16>" and "offset-list | |
746 | ACCESS-LIST-NAME <0-16> IFNAME" commands are added. | |
747 | ||
748 | ** "redistribute ROUTE-TYPE metric <0-16>" command is added. | |
749 | ||
750 | ** "default-information originate" command is added. | |
751 | ||
752 | ** "ip split-horizon" and "no ip split-horizon" is added to interface | |
753 | configuration. | |
754 | ||
755 | ** "no router rip" command is added. | |
756 | ||
757 | ** "ip rip authentication mode (md5|text)" is added to interface | |
758 | configuration. | |
759 | ||
760 | ** "ip rip authentication key-chain KEY-CHAIN" is added to interface | |
761 | configuration. | |
762 | ||
763 | ** Pass RIP metric value to zebra daemon. | |
764 | ||
765 | ** Distance manipulation functions are added. | |
766 | ||
767 | * Changes in bgpd | |
768 | ||
769 | ** Fix bug of next hop treatment for MPLS-VPN route exchange. | |
770 | ||
771 | ** BGP peer MIB is updated. | |
772 | ||
773 | ** Aggregated route has origin IGP, atomic-aggregate and proper | |
774 | aggregator attribute. | |
775 | ||
776 | ** Suppressed route now installed into BGP table. It is only | |
777 | suppressed from announcement. | |
778 | ||
779 | ** BGP router-id is properly set after "no router bgp ASN" and "router | |
780 | bgp ASN". | |
781 | ||
782 | ** Add check for nexthop is accessible or not for IBGP routes. | |
783 | ||
784 | ** Add cehck for nexthop is on connected or not for EBGP routes. | |
785 | ||
786 | ** "dump bgp route" command is changed to "dump bgp route-mrt" for | |
787 | generating MRT compatible dump output. | |
788 | ||
789 | ** Soft reconfiguration inbound and outbound is supported. | |
790 | ||
791 | ** Route refresh feature is supported. | |
792 | ||
793 | * Changes in vtysh | |
794 | ||
795 | ** VTY shell is now included into the distribution. | |
796 | \f | |
797 | * Changes in zebra-0.87 | |
798 | ||
799 | * Changes in lib | |
800 | ||
801 | ** "show startup-config" command is added. | |
802 | ||
803 | ** "show history" command is added. | |
804 | ||
805 | ** Memory statistics command is changed. New command | |
806 | ||
807 | show memory all | |
808 | show memory lib | |
809 | show memory rip | |
810 | show memory ospf | |
811 | show memory bgp | |
812 | ||
813 | are added. | |
814 | ||
815 | ** Filters can be removed only specify it's name. New command | |
816 | ||
817 | no access-list NAME | |
818 | no ip community-list NAME | |
819 | no ip as-path access-list NAME | |
820 | no route-map NAME | |
821 | ||
822 | are added. | |
823 | ||
824 | ** At any node, user can view/save user configuration. | |
825 | ||
826 | write terminal | |
827 | write file | |
828 | wirte memory | |
829 | ||
830 | are added to every node in default. | |
831 | ||
832 | ** LCD completion is added. For example both "ip" and "ipv6" command | |
833 | are exist, "i" then press TAB will be expanded to "ip". | |
834 | ||
835 | * Changes in bgpd | |
836 | ||
837 | ** "show ip bgp" family shows total number of prefixes. | |
838 | ||
839 | ** "no bgp default ipv4-unicast" command is added. | |
840 | ||
841 | ** Extended Communities support is added. | |
842 | ||
843 | ** "no neighbor PEER send-community extended" command is added. | |
844 | ||
845 | ** MPLS-VPN PE-RR support is added. | |
846 | ||
847 | New address family vpnv4 unicast is introduced. | |
848 | ||
849 | ! | |
850 | address-family vpnv4 unicast | |
851 | neighobr PEER activate | |
852 | network A.B.C.D rd RD tag TAG | |
853 | exit-address-family | |
854 | ! | |
855 | ||
856 | To make it route-reflector, please configure it under normal router | |
857 | bgp ASN. | |
858 | ||
859 | ! | |
860 | router bgp 7675 | |
861 | no bgp default ipv4-unicast | |
862 | bgp router-id 10.0.0.100 | |
863 | bgp cluster-id 10.0.0.100 | |
864 | neighbor 10.0.0.1 remote-as 65535 | |
865 | neighbor 10.0.0.1 route-reflector-client | |
866 | neighbor 10.0.0.2 remote-as 65535 | |
867 | neighbor 10.0.0.2 route-reflector-client | |
868 | neighbor 10.0.0.3 remote-as 65535 | |
869 | neighbor 10.0.0.3 route-reflector-client | |
870 | ! | |
871 | address-family vpnv4 unicast | |
872 | neighbor 10.0.0.1 activate | |
873 | neighbor 10.0.0.2 activate | |
874 | neighbor 10.0.0.3 activate | |
875 | exit-address-family | |
876 | ! | |
877 | ||
878 | * Changes in ospfd | |
879 | ||
880 | ** Many many bugs are fixed. | |
881 | ||
882 | * Changes in ripd | |
883 | ||
884 | ** Better interface up/down event handle. | |
885 | ||
886 | * Changes in zebra | |
887 | ||
888 | ** Better interface up/down event handle. | |
889 | \f | |
890 | * Changes in zebra-0.86 | |
891 | ||
892 | * Changes in lib | |
893 | ||
894 | ** Fix bug of exec-timeout command which may cause crush. | |
895 | ||
896 | ** Multiple same policy for "access-list", "ip prefix-list, "as-path | |
897 | access-list", "ip community-list" is not duplicated. | |
898 | ||
899 | ** It used to be "ip prefix-list A.B.C.D/M" match routes which mask >= | |
900 | M. Now default behavior is exact match so it only match routes which | |
901 | mask == M. | |
902 | ||
903 | * Changes in bgpd | |
904 | ||
905 | ** "match ip address prefix-list" is added to route-map. | |
906 | ||
907 | ** A route without local preference is evaluated as 100 local preference. | |
908 | ||
909 | ** Select smaller router-id route when other values are same. | |
910 | ||
911 | ** Compare MED only both routes comes from same neighboring AS. | |
912 | ||
913 | ** "bgp always-compare-med" command is added. | |
914 | ||
915 | ** Now MED value is passed to IBGP peer. | |
916 | ||
917 | ** When neighbor's filter is configured with non-existent access-list, | |
918 | as-path access-list, ip prefix-list, route-map. The behavior is | |
919 | changed from all permit to all deny. | |
920 | ||
921 | * Changes in ospfd | |
922 | ||
923 | ** Fix bug of external route tag byte order. | |
924 | ||
925 | ** OSPF Neighbor deletion bug which cause crush is fixed. | |
926 | ||
927 | ** Some route calculation bug are fixed. | |
928 | ||
929 | ** Add sanity check with router routing table. | |
930 | ||
931 | ** Fix bug of memory leak about linklist. | |
932 | ||
933 | ** Fix bug of 1-WayReceived in NSM. | |
934 | ||
935 | ** Take care of BIGENDIAN architecture. | |
936 | ||
937 | ** Fix bug of NSM state flapping between ExStart and Exchange. | |
938 | ||
939 | ** Fix bug of Network-LSA originated in stub network. | |
940 | ||
941 | ** Fix bug of MS flag unset. | |
942 | ||
943 | ** Add to schedule router_lsa origination when the interface cost | |
944 | changes. | |
945 | ||
946 | ** Increment LS age by configured interface transmit_delay. | |
947 | ||
948 | ** distribute-list is reimplemented. | |
949 | ||
950 | ** Fix bug of refresh never occurs. | |
951 | ||
952 | ** Fix bug of summary-LSAs reorigination. Correctly copy | |
953 | OSPF_LSA_APPROVED flag to new LSA. when summary-LSA is reoriginatd. | |
954 | ||
955 | ** Fix bug of re-origination when a neighbor disappears. | |
956 | ||
957 | ** Fix bug of segmentation fault with DD retransmission. | |
958 | ||
959 | ** Fix network-LSA re-origination problem. | |
960 | ||
961 | ** Fix problem of remaining withdrawn routes on zebra. | |
962 | ||
963 | * Changes in ripd | |
964 | ||
965 | ** Do not leave from multicast group when interface goes down bug is | |
966 | fixed. | |
967 | ||
968 | * Changes in zebra | |
969 | ||
970 | ** Remove client structure when client dies. | |
971 | ||
972 | ** Take care static route when interface goes up/down. | |
973 | \f | |
974 | * Changes in zebra-0.85 | |
975 | ||
976 | * Changes in bgpd | |
977 | ||
978 | ** "transparent-nexthop" and "transparenet-as" commands are added. | |
979 | ||
980 | ** Route reflector's originator-id bug is fixed. | |
981 | ||
982 | * Changes in ospfd | |
983 | ||
984 | ** Fix bug of OSPF LSA memory leak. | |
985 | ||
986 | ** Fix bug of OSPF external route memory leak. | |
987 | ||
988 | ** AS-external-LSA origination bug was fixed. | |
989 | ||
990 | ** LS request treatment is completely rewritten. Now performance is | |
991 | drastically improved. | |
992 | ||
993 | * Changes in ripd | |
994 | ||
995 | ** RIPv1 update is done by class-full manner. | |
996 | \f | |
997 | * Changes in zebra-0.84b | |
998 | ||
999 | * Changes in lib | |
1000 | ||
1001 | ** Fix bug of inet_pton return value handling | |
1002 | ||
1003 | * Changes in bgpd | |
1004 | ||
1005 | ** Fix bug of BGP-4+ link-local address nexthop check for IBGP peer. | |
1006 | ||
1007 | ** Don't allocate whole buffer for displaying "show ip bgp". Now it | |
1008 | consume only one screen size memory. | |
1009 | ||
1010 | * Changes in ripd | |
1011 | ||
1012 | ** Fix debug output string. | |
1013 | ||
1014 | ** Add RIP peer handling. RIP peer are shown by "show ip protocols". | |
1015 | \f | |
1016 | * Changes in zebra-0.84a | |
1017 | ||
1018 | * Changes in bgpd | |
1019 | ||
1020 | ** Fix serious bug of BGP-4+ peering under IPv6 link-local address. | |
1021 | Due to the bug BGP-4+ peering may not be established. | |
1022 | \f | |
1023 | * Changes in zebra-0.84 | |
1024 | ||
1025 | * Changes in lib | |
1026 | ||
1027 | ** IPv6 address and prefix parser is added to VTY by Toshiaki Takada | |
1028 | <takada@zebra.org>. DEFUN string is "X:X::X:X" for IPv6 address, | |
1029 | "X:X::X:X/M" for IPv6 prefix. You can use it like this. | |
1030 | ||
1031 | DEFUN (func, cmd, "neighbor (A.B.C.D|X:X::X:X) remote-as <1-65535>") | |
1032 | ||
1033 | ** VTY configuration is locked during configuration. This is for | |
1034 | avoiding unconditional crush from two terminals modify the | |
1035 | configuration at the same time. "who" command shows which termnal | |
1036 | lock the configuration. VTY which has '*' character at the head of | |
1037 | line is locking the configuration. | |
1038 | ||
1039 | ** Old logging functions are removed. Functions like | |
1040 | log_open,log_close,openlog are deleted. Instead of that please use | |
1041 | zlog_* functions. zvlog_* used in ospf6d are deleted also. | |
1042 | ||
1043 | ** "terminal monitor" command is added. "no terminal monitor" is for | |
1044 | disabling. This command simply display logging information to the | |
1045 | VTY. | |
1046 | ||
1047 | ** dropline.[ch] files are deleted. | |
1048 | ||
1049 | * Changes in bgpd | |
1050 | ||
1051 | ** BGP neighbor configuration are sorted by it's IP address. | |
1052 | ||
1053 | ** BGP peer configuration and actual peer is separated. This is | |
1054 | preparation for Route Server support. | |
1055 | ||
1056 | ** "no neighbor PEER" command is added. You can delete neighbor | |
1057 | without specifying AS number. | |
1058 | ||
1059 | ** "no neighbor ebgp-multihop" command is added. | |
1060 | ||
1061 | ** "no neighbor port PORT" command is added. | |
1062 | ||
1063 | ** To conform RFC1771, "neighbor PEER send-community" is default | |
1064 | behavior. If you want to disable sending community attribute, | |
1065 | please specify "no neighbor PEER send-community" to the peer. | |
1066 | ||
1067 | ** "neighbor maximum-prefix NUMBER" command is added. | |
1068 | ||
1069 | ** Multi-protocol extention NLRI is proceeded only when the peer is | |
1070 | configured proper Address Family and Subsequent Address Family. If | |
1071 | not, those NLRI are simply ignored. | |
1072 | ||
1073 | ** Aggregate-address support is improved. Currently below commands | |
1074 | works. | |
1075 | ||
1076 | "aggregate-address" | |
1077 | "aggregate-address summary-only" | |
1078 | "no aggregate-address" | |
1079 | "no aggregate-address summary-only" | |
1080 | ||
1081 | "ipv6 bgp aggregate-address" | |
1082 | "ipv6 bgp aggregate-address summary-only" | |
1083 | "no ipv6 bgp aggregate-address" | |
1084 | "no ipv6 bgp aggregate-address summary-only" | |
1085 | ||
1086 | ** redistribute route-map bug is fixed. | |
1087 | ||
1088 | ** MBGP support becomes default. "configure" option --enable-mbgp is | |
1089 | removed. | |
1090 | ||
1091 | ** New command "neighbor PEER timers connect <1-65535>" is added. | |
1092 | ||
1093 | ** New command "neighbor PEER override-capability" is added. | |
1094 | ||
1095 | ** New command "show ip bgp neighbor A.B.C.D advertised-route" is added. | |
1096 | ||
1097 | ** New command "show ip bgp neighbor A.B.C.D routes" is added. To use | |
1098 | this command, you have to configure neighbor with | |
1099 | "neighbor A.B.C.D soft-reconfiguration inbound" beforehand. | |
1100 | ||
1101 | \f | |
1102 | * Changes in zebra-0.83 | |
1103 | ||
1104 | * bgpd | |
1105 | ||
1106 | ** Serious bug fix about fetching global and link-local address at the | |
1107 | same time. Due to this bug, corrupted IPv6 prefix is generated. If | |
1108 | you uses bgpd for BGP-4+ please update to this version. The bug is | |
1109 | introduced in zebra-0.82. | |
1110 | ||
1111 | ** When bgpd send Notify message, don't use thread manager. It is now | |
1112 | send to neighbor immediately. | |
1113 | \f | |
1114 | * Changes in zebra-0.82 | |
1115 | ||
1116 | ** Solaris 2.6 support is added by Michael Handler | |
1117 | <handler@sub-rosa.com>. | |
1118 | ||
1119 | ** MBGP support is added by Robert Olsson <Robert.Olsson@data.slu.se>. | |
1120 | Please specify --enable-mbgp to configure script. This option will be | |
1121 | removed in the future and MBGP support will be default. | |
1122 | ||
1123 | * Changes in zebra | |
1124 | ||
1125 | ** When interface goes down, withdraw connected routes from routing | |
1126 | table. When interface goes up, restore the routes to the routing | |
1127 | table. | |
1128 | ||
1129 | ** `show interface' show interface's statistics on Linux and BSD with | |
1130 | routing socket. | |
1131 | ||
1132 | ** Now zebra can get MTU value on BSDI/OS. | |
1133 | ||
1134 | * Changes in bgpd | |
1135 | ||
1136 | ** Add capability option support based upon | |
1137 | draft-ietf-idr-bgp4-cap-neg-04.txt. | |
1138 | ||
1139 | ** Add `show ipv6 bgp prefix-list' command. | |
1140 | ||
1141 | ** Check self AS appeared in received routes. | |
1142 | ||
1143 | ** redistribute route-map support is added. | |
1144 | ||
1145 | ** BGP packet dump feature compatible with MRT. | |
1146 | ||
1147 | * Changes in ripd | |
1148 | ||
1149 | ** Fix bug of `timers basic' command's argument format. | |
1150 | ||
1151 | * Changes in ripngd | |
1152 | ||
1153 | ** Calculate max RTE using interface's MTU value. | |
1154 | ||
1155 | * Changes in ospfd | |
1156 | ||
1157 | ** Some correction to LSU processing. | |
1158 | ||
1159 | ** Add check for lsa->refresh_list. | |
1160 | ||
1161 | * Changes in ospf6d | |
1162 | ||
1163 | ** Many debug feature is added. | |
1164 | \f | |
1165 | * Changes in zebra-0.81 | |
1166 | ||
1167 | ** SNMP support is disabled in default.--enable-snmp option is added | |
1168 | to configure script. | |
1169 | ||
1170 | * Changes in bgpd | |
1171 | ||
1172 | ** Fix FSM bug which introduced in zebra-0.80. | |
1173 | \f | |
1174 | * Changes in zebra-0.80 | |
1175 | ||
1176 | * access-list | |
1177 | ||
1178 | New access-list name space `ipv6 access-list' is added. At the same | |
1179 | time, `access-list' statemant only accepts IPv4 prefix. Please be | |
1180 | careful if you use IPv6 filtering. You will need to change your | |
1181 | configuration. For IPv6 filtering please use `ipv6 access-list'. | |
1182 | ||
1183 | As of zebra-0.7x, user can use `access-list' for both IPv4 and IPv6 | |
1184 | filtering. | |
1185 | ||
1186 | ! zebra-0.7x | |
1187 | access-list DML-net permit 203.181.89.0/24 | |
1188 | access-list DML-net permit 3ffe:506::0/32 | |
1189 | access-list DML-net deny any | |
1190 | ! | |
1191 | ||
1192 | Above configuration is not valid for zebra-08x. Please add `ipv6' | |
1193 | before 'access-list' when you configure IPv6 filtering. | |
1194 | ||
1195 | ! zebra-0.8x | |
1196 | access-list DML-net permit 203.181.89.0/24 | |
1197 | access-list DML-net deny any | |
1198 | ! | |
1199 | ipv6 access-list DML-net permit 3ffe:506::0/32 | |
1200 | ipv6 access-list DML-net deny any | |
1201 | ! | |
1202 | ||
1203 | * prefix-list | |
1204 | ||
1205 | And also new prefix-list name space `ipv6 prefix-list' is added. It | |
1206 | is the same as the change of `access-list'. `ip prefix-list' now only | |
1207 | accept IPv4 prefix. It was source of confusion that `ip prefix-list' | |
1208 | can be used both IPv4 and IPv6 filtering. Now name space is separated | |
1209 | to clear the meaning of the filter. | |
1210 | ||
1211 | If you use `ip prefix-list' for IPv6 filtering, please change the | |
1212 | stetement. | |
1213 | ||
1214 | ! zebra-0.7x | |
1215 | ip prefix-list 6bone-filter seq 5 permit 3ffe::/17 le 24 ge 24 | |
1216 | ip prefix-list 6bone-filter seq 10 permit 3ffe:8000::/17 le 28 ge 28 | |
1217 | ip prefix-list 6bone-filter seq 12 deny 3ffe::/16 | |
1218 | ip prefix-list 6bone-filter seq 15 permit 2000::/3 le 16 ge 16 | |
1219 | ip prefix-list 6bone-filter seq 20 permit 2001::/16 le 35 ge 35 | |
1220 | ip prefix-list 6bone-filter seq 30 deny any | |
1221 | ! | |
1222 | ||
1223 | Now user can explicitly configure it as IPv6 prefix-list. | |
1224 | ||
1225 | ! zebra-0.8x | |
1226 | ipv6 prefix-list 6bone-filter seq 5 permit 3ffe::/17 le 24 ge 24 | |
1227 | ipv6 prefix-list 6bone-filter seq 10 permit 3ffe:8000::/17 le 28 ge 28 | |
1228 | ipv6 prefix-list 6bone-filter seq 12 deny 3ffe::/16 | |
1229 | ipv6 prefix-list 6bone-filter seq 15 permit 2000::/3 le 16 ge 16 | |
1230 | ipv6 prefix-list 6bone-filter seq 20 permit 2001::/16 le 35 ge 35 | |
1231 | ipv6 prefix-list 6bone-filter seq 30 deny any | |
1232 | ! | |
1233 | ||
1234 | * RIP configuration | |
1235 | ||
1236 | If you want to filter only default route (0.0.0.0/0) and permit other | |
1237 | routes, it was hard to do that. Now `ip prefix-list' can be used for | |
1238 | RIP route filtering. | |
1239 | ||
1240 | New statement: | |
1241 | ||
1242 | `distribute-list prefix PLIST_NAME (in|out) IFNAME' | |
1243 | ||
1244 | is added to ripd. So you can configure on eth0 interface accept all | |
1245 | routes other than default routes. | |
1246 | ||
1247 | ! | |
1248 | router rip | |
1249 | distribute-list prefix filter-default in eth0 | |
1250 | ! | |
1251 | ip prefix-list filter-default deny 0.0.0.0/0 le 0 | |
1252 | ip prefix-list filter-default permit any | |
1253 | ! | |
1254 | ||
1255 | * RIPng configuration | |
1256 | ||
1257 | Same change is done for ripngd. You can use `ipv6 prefix-list' for | |
1258 | filtering. | |
1259 | ||
1260 | ! | |
1261 | router ripng | |
1262 | distribute-list prefix filter-default in eth0 | |
1263 | ! | |
1264 | ipv6 prefix-list filter-default deny ::/0 le 0 | |
1265 | ipv6 prefix-list filter-default permit any | |
1266 | ! | |
1267 | ||
1268 | * BGP configuration | |
1269 | ||
1270 | So far, Multiprotocol Extensions for BGP-4 (RFC2283) configuration is | |
1271 | done with traditional IPv4 peering statement like blow. | |
1272 | ||
1273 | ! | |
1274 | router bgp 7675 | |
1275 | neighbor 3ffe:506::1 remote-as 2500 | |
1276 | neighbor 3ffe:506::1 prefix-list 6bone-filter out | |
1277 | ! | |
1278 | ||
1279 | For separating configuration IPv4 and IPv6, and for retaining Cisco | |
1280 | configuration compatibility, now IPv6 configuration is done by IPv6 | |
1281 | specific statement. IPv6 BGP configuration is done by statement which | |
1282 | start from `ipv6 bgp'. | |
1283 | ||
1284 | ! | |
1285 | router bgp 7675 | |
1286 | ! | |
1287 | ipv6 bgp neighbor 3ffe:506::1 remote-as 2500 | |
1288 | ipv6 bgp neighbor 3ffe:506::1 prefix-list 6bone-filter out | |
1289 | ! | |
1290 | ||
1291 | At the same time some IPv6 specific commands are deleted from IPv4 | |
1292 | configuration. | |
1293 | ||
1294 | o redistribute ripng | |
1295 | o redistribute ospf6 | |
1296 | o neighbor PEER version BGP_VERSION | |
1297 | o neighbor PEER interface IFNAME | |
1298 | ||
1299 | Those commands are only accepted as like below. | |
1300 | ||
1301 | o ipv6 bgp redistribute ripng | |
1302 | o ipv6 bgp redistribute ospf6 | |
1303 | o ipv6 bgp neighbor PEER version BGP_VERSION | |
1304 | o ipv6 bgp neighbor PEER interface IFNAME | |
1305 | ||
1306 | And below new commands are added. | |
1307 | ||
1308 | o ipv6 bgp network IPV6_PREFIX | |
1309 | o ipv6 bgp redistribute static | |
1310 | o ipv6 bgp redistribute connected | |
1311 | o ipv6 bgp neighbor PEER remote-as <1-65535> [passive] | |
1312 | o ipv6 bgp neighbor PEER ebgp-multihop [TTL] | |
1313 | o ipv6 bgp neighbor PEER description DESCRIPTION | |
1314 | o ipv6 bgp neighbor PEER shutdown | |
1315 | o ipv6 bgp neighbor PEER route-reflector-client | |
1316 | o ipv6 bgp neighbor PEER update-source IFNAME | |
1317 | o ipv6 bgp neighbor PEER next-hop-self | |
1318 | o ipv6 bgp neighbor PEER timers holdtime <0-65535> | |
1319 | o ipv6 bgp neighbor PEER timers keepalive <0-65535> | |
1320 | o ipv6 bgp neighbor PEER send-community | |
1321 | o ipv6 bgp neighbor PEER weight <0-65535> | |
1322 | o ipv6 bgp neighbor PEER default-originate | |
1323 | o ipv6 bgp neighbor PEER filter-list FILTER_LIST_NAME (in|out) | |
1324 | o ipv6 bgp neighbor PEER prefix-list PREFIX_LIST_NAME (in|out) | |
1325 | o ipv6 bgp neighbor PEER distribute-list AS_LIST_NAME (in|out) | |
1326 | o ipv6 bgp neighbor PEER route-map ROUTE_MAP_NAME (in|out) | |
1327 | ||
1328 | And some utility commands are introduced. | |
1329 | ||
1330 | o clear ipv6 bgp [PEER] | |
1331 | o show ipv6 bgp neighbors [PEER] | |
1332 | o show ipv6 bgp summary | |
1333 | ||
1334 | I hope these changes are easy to understand for current Zebra users... | |
1335 | ||
1336 | * To restrict connection to VTY interface. | |
1337 | ||
1338 | It used to be both IPv4 and IPv6 filter can be specified with one | |
1339 | access-list. Then the access-list can be appried to VTY interface | |
1340 | with `access-class' stetement in `line vty' node. Below is example in | |
1341 | zebra-0.7x. | |
1342 | ||
1343 | ! | |
1344 | access-list local-only permit 127.0.0.1/32 | |
1345 | access-list local-only permit ::1/128 | |
1346 | access-list local-only deny any | |
1347 | ! | |
1348 | line vty | |
1349 | access-class local-only | |
1350 | ! | |
1351 | ||
1352 | Now IPv4 and IPv6 filter have each name space. It is not possible to | |
1353 | specify IPv4 and IPv6 filter with one access-list. For setting IPv6 | |
1354 | access-list in `line vty', `ipv6 access-class' statement is | |
1355 | introduced. Let me show the configuration in zebra-0.8x. | |
1356 | ||
1357 | ! | |
1358 | access-list local-only permit 127.0.0.1/32 | |
1359 | access-list local-only deny any | |
1360 | ! | |
1361 | ipv6 access-list local-only permit ::1/128 | |
1362 | ipv6 access-list local-only dny any | |
1363 | ! | |
1364 | line vty | |
1365 | access-class local-only | |
1366 | ipv6 access-class local-only | |
1367 | ! | |
1368 | ||
1369 | * route-map | |
1370 | ||
1371 | New IPv6 related route-map match commands are added. | |
1372 | ||
1373 | o match ipv6 address | |
1374 | o match ipv6 next-hop | |
1375 | ||
1376 | Please change your configuration if you use IP match statement for | |
1377 | IPv6 route. | |
1378 | ||
1379 | zebra-0.7x config | |
1380 | ================= | |
1381 | ! | |
1382 | access-list all permit any | |
1383 | ! | |
1384 | route-map set-nexthop permit 10 | |
1385 | match ip address all | |
1386 | set ipv6 next-hop global 3ffe:506::1 | |
1387 | set ipv6 next-hop local fe80::cbb5:591a | |
1388 | ! | |
1389 | ||
1390 | zebra-0.8x config | |
1391 | ================= | |
1392 | ! | |
1393 | ipv6 access-list all permit any | |
1394 | ! | |
1395 | route-map set-nexthop permit 10 | |
1396 | match ipv6 address all | |
1397 | set ipv6 next-hop global 3ffe:506::1 | |
1398 | set ipv6 next-hop local fe80::cbb5:591a | |
1399 | ! | |
1400 | ||
1401 | * zebra connection | |
1402 | ||
1403 | Protocol daemon such as ripd, bgpd, ospfd will reconnect zebra daemon | |
1404 | when the connection fail. Those daemons try to connect zebra every 10 | |
1405 | seconds first three trial, then the interval changed to 60 seconds. | |
1406 | After all, if ten connections are fail, protocol daemon give up the | |
1407 | connection to the zebra daemon. | |
1408 | ||
1409 | * SNMP support (is not yet finished) | |
1410 | ||
1411 | Zebra uses SMUX protocol (RFC1227) for making communication with SNMP | |
1412 | agent. Currently lib/smux.c can be compiled only with ucd-snmp-4.0.1 | |
1413 | and http://ucd-snmp.ucdavis.edu/patches/012.patch. It can not be | |
1414 | compiled with ucd-snmp-3.6.2. | |
1415 | ||
1416 | After applying the patch to ucd-snmp-4.0.1, please configure it with | |
1417 | SMUX module. | |
1418 | ||
1419 | % configure --with-mib-modules=smux | |
1420 | ||
1421 | After compile & install ucd-snmp-4.0.1, you will need to configure | |
1422 | smuxpeer. I'm now using below configuration. | |
1423 | ||
1424 | /usr/local/share/snmp/snmpd.conf | |
1425 | ================================ | |
1426 | smuxpeer 1.3.6.1.6.3.1 test | |
1427 | ||
1428 | Above 1.3.6.1.6.3.1 and test is temporary configuration which is hard | |
1429 | coded in lib/smux.c. Yes, I know it is bad, I'll change it ASAP. | |
1430 | ||
1431 | * HUP signal treatment | |
1432 | ||
1433 | From zebra-0.80, ripd will reload it's configuration file when ripd | |
1434 | receives HUP signal. Other daemon such as bgpd, ospfd will support | |
1435 | HUP signal treatment soon. | |
1436 | \f | |
1437 | * Changes in zebra-0.79 | |
1438 | ||
1439 | * Changes in zebra | |
1440 | ||
1441 | ** Broadcast address setting on Linux box bug is fixed. | |
1442 | ||
1443 | ** Protocol daemon can install connected IPv6 route into the kernel. | |
1444 | ||
1445 | ** Now zebra can handle blackhole route. | |
1446 | ||
1447 | * Changes in ripd | |
1448 | ||
1449 | ** Add route-map feature for RIP protocol. | |
1450 | ||
1451 | ** In case of RIP version 2 routing table entry has IPv4 address and | |
1452 | netmask pair which host part bit is on, ignore the entry. | |
1453 | ||
1454 | * Changes in ripngd | |
1455 | ||
1456 | ** Change CMSG_DATA cast from (u_char *) to (int *). (u_char *) does | |
1457 | not work for NetBSD-currnet on SparcStation 10. | |
1458 | ||
1459 | * Changes in ospfd | |
1460 | ||
1461 | ** MaxAge LSA treatment is added. | |
1462 | ||
1463 | ** ABR/ASBR functionality is added. | |
1464 | ||
1465 | ** Virtual Link funtionality is added. | |
1466 | ||
1467 | ** ABR behaviors IBM/Cisco/Shortcut is added. | |
1468 | ||
1469 | * Changes in ospf6d | |
1470 | ||
1471 | ** Enclosed KAME specific part with #ifdef #endif | |
1472 | \f | |
1473 | * Changes in zebra-0.78 | |
1474 | ||
1475 | * Changes in lib | |
1476 | ||
1477 | ** SNMP support is started. | |
1478 | ||
1479 | ** Now Zebra can work on BSD/OS 4.X. | |
1480 | ||
1481 | ** Now Zebra can compiled on vanilla OpenBSD 2.5 but not yet working correcltly. | |
1482 | ||
1483 | * Changes in zebra | |
1484 | ||
1485 | ** Interface index detection using ioctl() bug is fixed. | |
1486 | ||
1487 | ** Interface information protocol is changed. Now interface | |
1488 | addition/deletion and interface's address addition/deletion is | |
1489 | separated. | |
1490 | ||
1491 | * Changes in bgpd | |
1492 | ||
1493 | ** BGP hold timer bug is fixed. | |
1494 | ||
1495 | ** BGP keepavlie timer becomes configurable. | |
1496 | ||
1497 | * Changes in ripd | |
1498 | ||
1499 | ** When making reply to rip's REQUEST message, fill in | |
1500 | RIP_METRIC_INFINITY with network byte order using htonl (). | |
1501 | ||
1502 | ** Pass host byte order address to IN_CLASSC and IN_CLASSB macro. | |
1503 | ||
1504 | * Changes in ospfd | |
1505 | ||
1506 | ** LSA flooding works. | |
1507 | ||
1508 | ** Fix bug of DD processing. | |
1509 | ||
1510 | ** Fix bug of originating router-LSA bug is fixed. | |
1511 | ||
1512 | ** LSA structure is changed to support LSA aging. | |
1513 | ||
1514 | * Changes in ospf6d | |
1515 | ||
1516 | ** `ip6' statement in configuration is changed to `ipv6'. | |
1517 | \f | |
1518 | * Changes in zebra-0.77 | |
1519 | ||
1520 | * Changes in lib | |
1521 | ||
1522 | ** SIGUSR1 reopen logging file. | |
1523 | ||
1524 | ** route-map is extended to support multi-protocol routing | |
1525 | information. | |
1526 | ||
1527 | ** When compiling under GNU libc 2.1 environment don't use inet6-apps. | |
1528 | ||
1529 | * Changes in zebra | |
1530 | ||
1531 | ** Basic IPv6 router advertisement codes added. It is not yet usable. | |
1532 | ||
1533 | ** Fix IPv6 route addition/deletion bug is fixed. | |
1534 | ||
1535 | ** `show ip route A.B.C.D' works | |
1536 | ||
1537 | * Changes in bgpd | |
1538 | ||
1539 | ** When invalid unfeasible routes length comes, bgpd send notify then | |
1540 | continue to process the packet. Now bgpd stop parsing invalid packet | |
1541 | then return to main loop. | |
1542 | ||
1543 | ** BGP-4+ withdrawn routes parse bug is fixed. | |
1544 | ||
1545 | ** When BGP-4+ information passed to non shared network's peer, trim | |
1546 | link-local next-hop information. | |
1547 | ||
1548 | ** `no redistribute ROUTE_TYPE' withdraw installed routes from BGP | |
1549 | routing information. | |
1550 | ||
1551 | ** `show ipv6 route IPV6ADDR' command added. | |
1552 | ||
1553 | ** BGP start timer has jitter. | |
1554 | ||
1555 | ** Holdtimer configuration bug is fixed. Now configuration does not | |
1556 | show unconfigured hold time value. | |
1557 | ||
1558 | * Changes in ripngd | |
1559 | ||
1560 | ** Now update timer (default 30 seconds) has +/- 50% jitter value. | |
1561 | ||
1562 | ** Add timers basic command. | |
1563 | ||
1564 | ** `network' configuration is dynamically reflected. | |
1565 | ||
1566 | ** `timers basic <update> <timeout> <garbage>' added. | |
1567 | ||
1568 | * Changes in ripd | |
1569 | ||
1570 | ** Reconstruct almost codes. | |
1571 | ||
1572 | ** `network' configuration is dynamically reflected. | |
1573 | ||
1574 | ** RIP timers now conforms to RFC2453. So user can configure update, | |
1575 | timeout, garbage timer. | |
1576 | ||
1577 | ** `timers basic <update> <timeout> <garbage>' works. | |
1578 | ||
1579 | * Changes in ospfd | |
1580 | ||
1581 | ** Bug of originating network LSA is fixed. | |
1582 | ||
1583 | ** `no router ospf' core dump bug is fixed. | |
1584 | ||
1585 | * Changes in ospf6d | |
1586 | ||
1587 | ** Redistribute route works. | |
1588 | \f | |
1589 | * Changes in zebra-0.76 | |
1590 | ||
1591 | * Changes in lib | |
1592 | ||
1593 | ** configure.in Linux IPv6 detection problem is fixed. | |
1594 | ||
1595 | ** Include SERVICES file to the distribution | |
1596 | ||
1597 | ** Update zebra.texi to zebra-0.76. | |
1598 | \f | |
1599 | * Changes in zebra-0.75 | |
1600 | ||
1601 | * Changes in lib | |
1602 | ||
1603 | ** `termnal length 0' bug is fixed. | |
1604 | ||
1605 | * Changes in zebra | |
1606 | ||
1607 | ** When zebra starts up, sweep all zebra installed routes. If -k or | |
1608 | --keep_kernel option is specified to zebra dameon. This function is | |
1609 | not performed. | |
1610 | ||
1611 | * Changes in ripngd | |
1612 | ||
1613 | ** Aggreagte address command supported. In router ripngd, | |
1614 | `aggregate-address IPV6PREFIX' works. | |
1615 | ||
1616 | * Changes in bgpd | |
1617 | ||
1618 | ** Input route-map's bug which cause segmentation violation is fixed. | |
1619 | ||
1620 | ** route-map method improved. | |
1621 | ||
1622 | ** BGP-4+ nexthop detection improved. | |
1623 | ||
1624 | ** BGP-4+ route re-selection bug is fixed. | |
1625 | ||
1626 | ** BGP-4+ iBGP route's nexthop calculation works. | |
1627 | ||
1628 | ** After connection Established `show ip bgp neighbor' display BGP TCP | |
1629 | connection's source and destination address. | |
1630 | ||
1631 | ** In case of BGP-4+ `show ip bgp neighbor' display BGP-4+ global and | |
1632 | local nexthop which used for originated route. This address will be | |
1633 | used when `next-hop-self'. | |
1634 | ||
1635 | * Changes in ospfd | |
1636 | ||
1637 | ** Fix bug of DR election. | |
1638 | ||
1639 | ** Set IP precedence field with IPTOS_PREC_INTERNET_CONTROL. | |
1640 | ||
1641 | ** Schedule NeighborChange event if NSM status change. | |
1642 | ||
1643 | ** Never include a neighbor in Hello packet, when the neighbor goes | |
1644 | down. | |
1645 | \f | |
1646 | * Changes in zebra-0.74 | |
1647 | ||
1648 | * Changes in lib | |
1649 | ||
1650 | ** Now `terminal length 0' means no line output control. | |
1651 | ||
1652 | ** `line LINES' command deleted. Instead of this please use `terminal | |
1653 | length <0-512>'. | |
1654 | ||
1655 | ** `terminal length <0-512>' is each vty specific configuration so it | |
1656 | can not be configured in the configuration file. If you want to | |
1657 | configure system wide line control, please use `service | |
1658 | terminal-length <0-512>'. This configuration affects to the all vty | |
1659 | interface. | |
1660 | ||
1661 | * Changes in zebra | |
1662 | ||
1663 | ** Installation of IPv6 route bug is fixed. | |
1664 | ||
1665 | * Changes in bgpd | |
1666 | ||
1667 | ** Very serious bug of bgp_stop () is fixed. When multiple route to | |
1668 | the same destination exist, bgpd try to announce the information to | |
1669 | stopped peer. Then add orphan write thread is added. This cause | |
1670 | many strange behavior of bgpd. | |
1671 | ||
1672 | ** Router-id parsing bug is fixed. | |
1673 | ||
1674 | ** With BGP-4+ nexthop installation was done with global address but | |
1675 | it should be link-local address. This bug is fixed now. | |
1676 | ||
1677 | ** When incoming route-map prepend AS, old AS path remained. Now bgpd | |
1678 | free old AS path. | |
1679 | ||
1680 | ** `neighbor PEER weight <0-65535>' command added. | |
1681 | ||
1682 | * Changes in ripngd | |
1683 | ||
1684 | ** Almost codes are rewritten to conform to RFC2080. | |
1685 | ||
1686 | * Changes in ospfd | |
1687 | ||
1688 | ** SPF calculation timer is added. Currently it is set to 30 seconds. | |
1689 | ||
1690 | ** SPF calculation works now. | |
1691 | ||
1692 | ** OSPF routing table codes are added. | |
1693 | ||
1694 | ** OSPF's internal routes installed into the kernel routing table. | |
1695 | ||
1696 | ** Now `ospfd' works as non-area, non-external route support OSPF | |
1697 | router. | |
1698 | ||
1699 | ** Call of log_rotate() is removed. | |
1700 | ||
1701 | * Changes in ospf6d | |
1702 | ||
1703 | ** LSA data structure is changed. | |
1704 | ||
1705 | ** Call of log_rotate() is removed. | |
1706 | \f | |
1707 | * Changes in zebra-0.73 | |
1708 | ||
1709 | * Changes in lib | |
1710 | ||
1711 | ** `config terminal' is changed to `configure terminal'. | |
1712 | ||
1713 | ** `terminal length <0-512>' command is added. | |
1714 | ||
1715 | ** Variable length argument was specified by `...'. Now all strings | |
1716 | started with character `.' is variable length argument. | |
1717 | ||
1718 | * Changes in zebra | |
1719 | ||
1720 | ** Internal route (such as iBGP, internal OSPF route) handling works | |
1721 | correctly. | |
1722 | ||
1723 | ** In interface node, `ipv6 address' and `no ipv6 address' works. | |
1724 | ||
1725 | ** Interface's address remain after `no ip address' bug is fixed. | |
1726 | ||
1727 | ** Host route such as IPv4 with /32 mask and IPv6 with /128 mask | |
1728 | didn't set RTF_GATEWAY even it has gateway. This bug if fixed now. | |
1729 | ||
1730 | * Changes in bgpd | |
1731 | ||
1732 | ** `match as-path' argument is used to be specify AS PATH value itself | |
1733 | directly (e.g. ^$). But it is changed to specify `ip as-apth | |
1734 | access-list' name. | |
1735 | ||
1736 | ** iBGP route handle works without getting error from the kernel. | |
1737 | ||
1738 | ** `set aggregator as AS A.B.C.D' command is added to route-map. | |
1739 | ||
1740 | ** `set atomic-aggregate' command is added to bgpd's routemap. | |
1741 | ||
1742 | ** Announcement of atomic aggregate attribute and aggregator attribute | |
1743 | works. | |
1744 | ||
1745 | ** `update-source' bug is fixed. | |
1746 | ||
1747 | ** When a route learned from eBGP is announced to iBGP, local | |
1748 | preference was set to zero. But now it set to | |
1749 | DEFAULT_LOCAL_PREF(100). | |
1750 | ||
1751 | * Changes in ripd | |
1752 | ||
1753 | ** RIPv1 route filter bug is fixed. | |
1754 | ||
1755 | ** Some memory leak is fixed. | |
1756 | ||
1757 | * Changes in ospfd | |
1758 | ||
1759 | ** Fix bug of DR Election. | |
1760 | ||
1761 | ** Fix bug of adjacency forming. | |
1762 | ||
1763 | * Changes in ospf6d | |
1764 | ||
1765 | ** Clean up logging message. | |
1766 | ||
1767 | ** Reflect routing information to zebra daemon. | |
1768 | \f | |
1769 | * Changes in zebra-0.72 | |
1770 | ||
1771 | * Changes in lib | |
1772 | ||
1773 | ** When getsockname return IPv4 mapped IPv6 address. Convert it to | |
1774 | IPv4 address. | |
1775 | ||
1776 | * Changes in bgpd | |
1777 | ||
1778 | ** Change route-map's next-hop related settings. | |
1779 | ||
1780 | set ip nexthop -> set ip next-hop | |
1781 | set ipv6 nexthop global -> set ipv6 next-hop global | |
1782 | set ipv6 nexthop local -> set ipv6 next-hop local | |
1783 | ||
1784 | ** Add `next-hop-self' command. | |
1785 | ||
1786 | * Changes in ospfd | |
1787 | ||
1788 | ** Fix bug of multiple `network area' directive crashes. | |
1789 | \f | |
1790 | * Changes in zebra-0.71 | |
1791 | ||
1792 | * Changes in lib | |
1793 | ||
1794 | ** `log syslog' command is added. | |
1795 | ||
1796 | ** Use getaddrinfo function to bind IPv4/IPv6 server socket. | |
1797 | ||
1798 | ** `no banner motd' will suppress motd output when user connect to VTY. | |
1799 | ||
1800 | ** Bind `quit' command to major nodes. | |
1801 | ||
1802 | * Changes in zebra | |
1803 | ||
1804 | ** Point-to-point link address handling bug is fixed. | |
1805 | ||
1806 | * Changes in bgpd | |
1807 | ||
1808 | ** AS path validity check is added. If malformed AS path is received | |
1809 | NOTIFY Malformed AS path is send to the peer. | |
1810 | ||
1811 | ** Use getaddrinfo function to bind IPv4/IPv6 server socket. | |
1812 | ||
1813 | * Changes in ripd | |
1814 | ||
1815 | ** Connected network announcement bug is fixed. | |
1816 | ||
1817 | ** `broadcast' command is deleted. | |
1818 | ||
1819 | ** `network' command is added. | |
1820 | ||
1821 | ** `neighbor' command is added. | |
1822 | ||
1823 | ** `redistribute' command is added. | |
1824 | ||
1825 | ** `timers basic' command is added. | |
1826 | ||
1827 | ** `route' command is added. | |
1828 | ||
1829 | * Changes in ripngd | |
1830 | ||
1831 | ** Fix metric calculation bug. | |
1832 | ||
1833 | * Changes in ospfd | |
1834 | ||
1835 | ** Check sum bug is fixed. | |
1836 | ||
1837 | * Chanegs in ospf6d | |
1838 | ||
1839 | ** Routing table code is rewritten. | |
1840 | \f | |
1841 | * Changes in zebra-0.70 | |
1842 | ||
1843 | * Changes in zebra | |
1844 | ||
1845 | ** Critical routing information base calculation bug check is fixed. | |
1846 | ||
1847 | ** zebra ipv4 message is extended to support external/internal route | |
1848 | flavor. | |
1849 | ||
1850 | ** Now if internal route doesn't has direct connected nexthop, then | |
1851 | nexthop is calculated by looking up IGP routing table. | |
1852 | ||
1853 | * Changes in bgpd | |
1854 | ||
1855 | ** `neighbor PEER update-source IFNAME' command added as ALIAS to | |
1856 | `neighbor PEER interface IFNAME'. | |
1857 | ||
1858 | * Changes in ospfd | |
1859 | ||
1860 | ** DD null pointer bug is fixed. | |
1861 | \f | |
1862 | * Changes in zebra-0.69 | |
1863 | ||
1864 | * Changes in zebra | |
1865 | ||
1866 | ** zebra redistirbution supports dynamic notification of the route | |
1867 | change. If you add static route while running zebra, it will be | |
1868 | reflected to other protocol daemon which set `redistribute static'. | |
1869 | ||
1870 | ** If static route installation is failed due to the error. The | |
1871 | static route is not added to the configuration and zebra routing | |
1872 | table. | |
1873 | ||
1874 | ** zebra sets forwarding flag to on when it starts up. | |
1875 | ||
1876 | ** `no ip forwarding' turn off IPv4 forwarding. | |
1877 | ||
1878 | ** `no ipv6 forwarding' turn off IPv6 forwarding. | |
1879 | ||
1880 | ** Change `show ipforward' command to `show ip forwarding'. | |
1881 | ||
1882 | ** Change `show ipv6forward' command to `show ipv6 forwarding'. | |
1883 | ||
1884 | ** `ip route A.B.C.D/M INTERFACE' works. So you can set `ip route | |
1885 | 10.0.0.0/8 eth0'. | |
1886 | ||
1887 | * Changes in bgpd | |
1888 | ||
1889 | ** `neighbor PEER send-community' command is added. If the option is | |
1890 | set, bgpd will send community attribute to the peer. | |
1891 | ||
1892 | ** When a BGP route has no-export community attribute and | |
1893 | send-community is set to the peer, the route is not announced to the | |
1894 | peer. | |
1895 | ||
1896 | * Changes in ripngd | |
1897 | ||
1898 | ** When ripngd terminates, delete all installed route. | |
1899 | ||
1900 | ** `redistribute static', `redistribute connected' works. | |
1901 | ||
1902 | ** Change `debug ripng event' to `debug ripng events'. | |
1903 | ||
1904 | ** Change `show debug ripng' to `show debugging ripng'. | |
1905 | ||
1906 | ** Bug of static route deletion is fixed. | |
1907 | ||
1908 | * Changes in ospfd | |
1909 | ||
1910 | ** LS request and LS update can be send and received. | |
1911 | \f | |
1912 | * Changes in zebra-0.68 | |
1913 | ||
1914 | * Changes in lib | |
1915 | ||
1916 | ** DEFUN() is extended to support (a|b|c) statement. | |
1917 | ||
1918 | ** Input buffer overflow bug is fixed. | |
1919 | ||
1920 | * Changes in bgpd | |
1921 | ||
1922 | ** `ip community-list' is added. | |
1923 | ||
1924 | ** set community and match community is added to route-map statement. | |
1925 | ||
1926 | ** aggregate-address A.B.C.D/M partly works. Now it works only | |
1927 | summary-only mode. | |
1928 | ||
1929 | * Changes in zebra | |
1930 | ||
1931 | ** IPv6 network address delete bug is fixed. | |
1932 | ||
1933 | * Changes in ospfd | |
1934 | ||
1935 | ** DR election bug fixed. | |
1936 | ||
1937 | ** Now Database Description can be send or received. | |
1938 | ||
1939 | ** Neighbor State Machine goes to Full state. | |
1940 | ||
1941 | * Changes in ospf6d | |
1942 | ||
1943 | ** router zebra related bug is fixed. | |
1944 | \f | |
1945 | * Changes in zebra-0.67 | |
1946 | ||
1947 | * Changes in lib | |
1948 | ||
1949 | ** `service password-encryption' is added for encrypted password. | |
1950 | ||
1951 | * Changes in bgpd | |
1952 | ||
1953 | ** `set as-path prepend ASPATH' is added to route-map command. | |
1954 | ||
1955 | ** `set weight WEIGHT' is added to route-map command. | |
1956 | ||
1957 | ** `no set ipv6 nexthop global' and `no set ipv6 nexthop local' | |
1958 | command is added to route-map. | |
1959 | ||
1960 | ** `neighbor IP_ADDR version BGP_VERSION' command's BGP_VERSION | |
1961 | argument changed. | |
1962 | ||
1963 | Old New | |
1964 | ===================== | |
1965 | bgp4 4 | |
1966 | bgp4+ 4+ | |
1967 | bgp4+-draft-00 4- | |
1968 | ===================== | |
1969 | ||
1970 | If you want to peer with old draft version of BGP-4+, please configure | |
1971 | like below: | |
1972 | ||
1973 | router bgp ASN | |
1974 | neighbor PEER version 4- | |
1975 | ||
1976 | ** Some AS path isn't correctly compared during route selection. Now | |
1977 | it is fixed. | |
1978 | ||
1979 | * Changes in ospfd | |
1980 | ||
1981 | ** `router zebra' is default behavior. | |
1982 | ||
1983 | * Changes in ospf6d | |
1984 | ||
1985 | ** `router zebra' is default behavior. | |
1986 | \f | |
1987 | * Changes in zebra-0.66 | |
1988 | ||
1989 | * Changes in zebra | |
1990 | ||
1991 | ** When other daemon such as gated install routes into the kernel then | |
1992 | zebra blocks. This is only occur with netlink socket. Now socket is | |
1993 | set as NONBLOCKING and problem is fixed. Reported and fixed by | |
1994 | Patrick Koppen <koppen@rhrk.uni-kl.de> | |
1995 | ||
1996 | * Changes in bgpd | |
1997 | ||
1998 | ** Now `router zebra' is not needed to insert BGP routes into the | |
1999 | kernel. It is default behavior. If you don't want to install the BGP | |
2000 | routes to the kernel, please configure like below: | |
2001 | ||
2002 | ! | |
2003 | router zebra | |
2004 | no redistribute bgp | |
2005 | ! | |
2006 | ||
2007 | ** redistribute connected works. | |
2008 | ||
2009 | ** redistribute static now filter local loopback routes and link local | |
2010 | network. | |
2011 | ||
2012 | * Changes in ripd | |
2013 | ||
2014 | ** Some network check is added. Patch is done by Carlos Alberto | |
2015 | Barcenilla <barce@frlp.utn.edu.ar> | |
2016 | ||
2017 | * Changes in ripngd | |
2018 | ||
2019 | ** Sometimes ripngd install wrong nexthop into the kernel. This bug | |
2020 | is fixed now. | |
2021 | ||
2022 | ** Now `router zebra' is not needed to insert RIPng routes into the | |
2023 | kernel. It is default behavior. If you don't want to install the BGP | |
2024 | routes to the kernel, please configure like below: | |
2025 | ||
2026 | ! | |
2027 | router zebra | |
2028 | no redistribute ripng | |
2029 | ! | |
2030 | \f | |
2031 | * Changes in zebra-0.65 | |
2032 | ||
2033 | * Changes in lib | |
2034 | ||
2035 | ** `C-c' changes current node to ENABLE_NODE. Previously it doesn't. | |
2036 | ||
2037 | ** In ENABLE_NODE, `exit' command close vty connection. | |
2038 | ||
2039 | ** `service advanced-vty' enable advanced vty function. If this | |
2040 | service is specified one can directly connect to ENABLE_NODE when | |
2041 | enable password is not set. | |
2042 | ||
2043 | ** `lines LINES' command is added by Stephen R. van den Berg | |
2044 | <srb@cuci.nl>. | |
2045 | ||
2046 | * Changes in zebra | |
2047 | ||
2048 | ** Basic Linux policy based routing table support is added by Stephen | |
2049 | R. van den Berg <srb@cuci.nl>. | |
2050 | ||
2051 | * Changes in bgpd | |
2052 | ||
2053 | ** route-map command is improved: | |
2054 | `match ip next-hop': New command. | |
2055 | `match metric': New command. | |
2056 | `set metric': Doc fixed. | |
2057 | `set local-preference': DEFUN added. | |
2058 | ||
2059 | * Changes in ripd | |
2060 | ||
2061 | ** Check of announced network is added. Now multicast address is | |
2062 | filtered. Reported by Carlos Alberto Barcenilla | |
2063 | <barce@frlp.utn.edu.ar> | |
2064 | ||
2065 | ** Check of network 127 is added. Reported by Carlos Alberto | |
2066 | Barcenilla <barce@frlp.utn.edu.ar> | |
2067 | ||
2068 | * Changes in ripngd | |
2069 | ||
2070 | ** Aging route bug is fixed. | |
2071 | ||
2072 | ** `router zebra' semantics changed. ripngd automatically connect to | |
2073 | zebra. | |
2074 | ||
2075 | * Changes in ospfd | |
2076 | ||
2077 | ** `no router ospf' works. | |
2078 | ||
2079 | * Changes in ospf6d | |
2080 | ||
2081 | ** Bug fix about network vertex. | |
2082 | \f | |
2083 | * Changes in zebra-0.64.1. | |
2084 | ||
2085 | This is bug fix release. | |
2086 | ||
2087 | * Changes in lib | |
2088 | ||
2089 | ** Add check of sin6_scope_id in struct sockaddr_in6. For compilation | |
2090 | on implementation which doesn't have sin6_scope_id. Reported by Wim | |
2091 | Biemolt <Wim.Biemolt@ipv6.surfnet.nl>. | |
2092 | ||
2093 | * Changes in zebra | |
2094 | ||
2095 | ** Fix bug of display BGP routes as "O" instead of "B". Reported by | |
2096 | "William F. Maton" <wmaton@enterprise.ic.gc.ca> and Dave Hartzell | |
2097 | <hartzell@greatplains.net>. | |
2098 | ||
2099 | * Changes in bgpd | |
2100 | ||
2101 | ** `no network IPV6_NETWORK' statement and `no neighbor IP_ADDR timers | |
2102 | holdtime [TIMER]' statement doesn't work. Reported by Georg Hitsch | |
2103 | <georg@atnet.at>. Now both statement work. | |
2104 | ||
2105 | * Changes in ospfd | |
2106 | ||
2107 | ** Last interface is not updated by ospf_if_update(). Reported by | |
2108 | Dave Hartzell <hartzell@greatplains.net>. | |
2109 | ||
2110 | * Changes in ospf6d | |
2111 | ||
2112 | ** Byte order of ifid is changed. Due to this change, this code will | |
2113 | not work with previous version, sorry. | |
2114 | ||
2115 | ** Fix `show ip route' route type mismatch. | |
2116 | ||
2117 | ** Fix bug of no network IPV6_NETWORK. | |
2118 | ||
2119 | ** Important bug fix about intra-area-prefix-lsa. | |
2120 | \f | |
2121 | * Changes in zebra-0.64. | |
2122 | ||
2123 | * Changes in lib | |
2124 | ||
2125 | ** prefix-list based filtering routine is added. Currently used in | |
2126 | bgpd but it will be in other daemons. | |
2127 | ||
2128 | * Changes in bgpd | |
2129 | ||
2130 | ** `no router bgp' works. But network statement is not cleared. This | |
2131 | should be fixed in next beta. | |
2132 | ||
2133 | ** Route reflector related statement is added. | |
2134 | ||
2135 | router bgp ASN | |
2136 | bgp cluster-id a.b.c.d | |
2137 | neighbor a.b.c.d route-reflector-client | |
2138 | ||
2139 | is added. | |
2140 | ||
2141 | ** Prefix list based filtering is added. | |
2142 | ||
2143 | router bgp ASN | |
2144 | neighbor a.b.c.d prefix-list PREFIX_LIST_NAME | |
2145 | ||
2146 | ** Prefix list based routing display works. | |
2147 | ||
2148 | show ip bgp prefix-list PREFIX_LIST_NAME | |
2149 | ||
2150 | * Changes in ripd | |
2151 | ||
2152 | ** Fix route metric check bug. Reported from Mr. Carlos Alberto | |
2153 | Barcenilla. | |
2154 | ||
2155 | * Changes in ospf6d | |
2156 | ||
2157 | ** There are many changes. If you have interested in ospf6d please | |
2158 | visit ospf6d/README file. | |
2159 | \f | |
2160 | * Changes in zebra-0.63 first beta package. | |
2161 | ||
2162 | * Changes in lib | |
2163 | ||
2164 | ** `copy running-config stgartup-config' command is added. | |
2165 | ||
2166 | ** prefix length check bug is fixed. Thanks Marlos Barcenilla | |
2167 | <barce@frip.utn.edu.ar>. | |
2168 | ||
2169 | * Changes in ospfd | |
2170 | ||
2171 | ** DR and BDR election works. | |
2172 | ||
2173 | ** OSPF Hello simple authentication works. | |
2174 | ||
2175 | * Changes in ospf6d | |
2176 | ||
2177 | ** Now ospf6d can be compiled on both Linux and *BSD system. | |
2178 | \f | |
2179 | * Changes in zebra-19990420 snapshot | |
2180 | ||
2181 | ** `make dist' at top directory works now. | |
2182 | ||
2183 | * Changes in lib | |
2184 | ||
2185 | ** VTY has now access-class to restrict remote connection. | |
2186 | Implemented by Alex Bligh <amb@gxn.net>. | |
2187 | ||
2188 | ! | |
2189 | line vty | |
2190 | access-class ACCESS-LIST-NAME | |
2191 | ! | |
2192 | ||
2193 | ** `show version' command added. Implemented by Carlos Alberto | |
2194 | Barcenilla <barce@frlp.utn.edu.ar> | |
2195 | ||
2196 | * Changes in zebra | |
2197 | ||
2198 | ** `ip address' command on *BSD bug is fixed. | |
2199 | ||
2200 | ** `no ip address' works now for IPv4 address. | |
2201 | ||
2202 | ** Now `write terminal' display `ip address' configuration. | |
2203 | ||
2204 | * Changes in bgpd | |
2205 | ||
2206 | ** Redistribute static works now. Please run both zebra and bgpd. | |
2207 | bgpd.conf should be like this: | |
2208 | ||
2209 | ! | |
2210 | router zebra | |
2211 | ! | |
2212 | router bgp ASN | |
2213 | redisitribute static | |
2214 | ! | |
2215 | ||
2216 | * Changes in guile | |
2217 | ||
2218 | ** configure --enable-guile turns on zebra-guile build. | |
2219 | ||
2220 | ** (router-bgp ASN) allocates real bgp structre. | |
2221 | \f | |
2222 | * Changes in zebra-19990416 snapshot | |
2223 | ||
2224 | ** Set version to 0.60 for preparation of beta release. | |
2225 | ||
2226 | ** New directory guile is added for linking with guile interpreter. | |
2227 | ||
2228 | * Changes in zebra | |
2229 | ||
2230 | ** On GNU/Linux Kernel 2.2.x (with netlink support), zebra detects | |
2231 | asynchronous routing updates. *BSD support is not yet finished. | |
2232 | ||
2233 | * Changes in bgpd | |
2234 | ||
2235 | ** `show ip bgp regexp ASPATH_REGEX' uses CISCO like regular expression | |
2236 | instead of RPSL like regular expression. I'm planing to provide RPSL | |
2237 | like regular expression with `show ip bgp rpsl' or something. | |
2238 | ||
2239 | * Changes in lib | |
2240 | ||
2241 | ** Press '?' at variable mandatory argument, vty prints nothing. Now | |
2242 | vty outputs description about the argument. Fixed by Alex Bligh | |
2243 | <amb@gxn.net> | |
2244 | ||
2245 | ** buffer.c has some ugly bugs. Due to the bug, vty interface hangs | |
2246 | when large output date exists. This bug is fixed. Reported by Alex | |
2247 | Bligh <amb@gxn.net>. | |
2248 | ||
2249 | * Changes in ospfd | |
2250 | ||
2251 | ** DR and BDR information is shown by `show ip ospf interface' command. | |
2252 | \f | |
2253 | * Changes in zebra-19990408 snapshot | |
2254 | ||
2255 | * Changes in bgpd | |
2256 | ||
2257 | ** Old BGP-4+ specification (described in old draft) treatment bug is | |
2258 | fixed. It seems that mrtd uses this format as default. So if you | |
2259 | have problem peering with mrtd and want to use old draft format please | |
2260 | use version statement like this. | |
2261 | ||
2262 | neighbor PEER_ADDRESS remote-as ASN | |
2263 | neighbor PEER_ADDRESS version bgp4+-draft-00 | |
2264 | ||
2265 | ** When AS path is epmty (routes generated by bgpd), SEGV is occur | |
2266 | when announce the routes to eBGP peer. Reported by | |
2267 | kad@gibson.skif.net. | |
2268 | ||
2269 | ** ip as-path access-list command is added. | |
2270 | ||
2271 | ** neighbor PEER_ADDRESS filter-list AS_LIST [in|out] command is added. | |
2272 | ||
2273 | ** neighbor PEER_ADDRESS timers holdtimer TIMER command is added. | |
2274 | ||
2275 | * Changes in all daemons | |
2276 | ||
2277 | ** With KAME stack, terminal interface is now bind AF_INET socket | |
2278 | instead of AF_INET6 one. | |
2279 | \f | |
2280 | * Changes in zebra-19990403 snapshot | |
2281 | ||
2282 | * Changes in bgpd | |
2283 | ||
2284 | ** When bgpd has 'router zebra', bgpd automatically select it's router | |
2285 | ID as most highest interface's IP Address. | |
2286 | ||
2287 | ** When AS path is empty (in case of iBGP), it doesn't include any AS | |
2288 | segment. This change is for announcement to gated under iBGP. | |
2289 | ||
2290 | * Changes in ospfd | |
2291 | ||
2292 | ** OSPF hello packet send/receive works. | |
2293 | ||
2294 | * Changes in ospf6d | |
2295 | ||
2296 | ** Yasuhiro Ohara's ospf6d codes is imported. It is under development | |
2297 | and can't be compiled on any platform. | |
2298 | \f | |
2299 | * Changes in zebra-19990327 snapshot | |
2300 | ||
2301 | * Changes in bgpd | |
2302 | ||
2303 | ** When BGP-4+ connection is done by IPv6 link-local address. One | |
2304 | have to specify interface index for the connection. So I've added | |
2305 | interface statement to the neighbor commmand. Please specify | |
2306 | interface name for getting interface index like below. This statement | |
2307 | only works on GNU/Linux. I'll support BSD ASAP. | |
2308 | ||
2309 | router bgp 7675 | |
2310 | neighbor fe80::200:f8ff:fe01:5fd3 remote-as 2500 | |
2311 | neighbor fe80::200:f8ff:fe01:5fd3 interface sit3 | |
2312 | ||
2313 | ** For disable BGP peering `shutdown' command is added. | |
2314 | ||
2315 | router bgp 7675 | |
2316 | neighbor 10.0.0.1 shutdown | |
2317 | ||
2318 | ** `description' command is added to neighbor statement. | |
2319 | ||
2320 | router bgp 7675 | |
2321 | neighbor 10.0.0.1 description peering with Norway. | |
2322 | ||
2323 | ** `show ip bgp regexp AS-REGEXP' works again. | |
2324 | ||
2325 | show ip bgp regexp AS7675 | |
2326 | ||
2327 | will show routes which include AS7675. | |
2328 | ||
2329 | ** When a route which is made from `network' statement is send to | |
2330 | neighbor. Set it's nexthop to self. So 10.0.0.0/8 is announced to | |
2331 | the peer A with source address 192.168.1.1. The routes nexthop is set | |
2332 | to 192.168.1.1. | |
2333 | ||
2334 | * Changes in zebra | |
2335 | ||
2336 | ** In zebra/rtread_sysctl.c, function rtm_read() may overrun allocated | |
2337 | buffer when the address family is not supported and the length is big | |
2338 | (i.e link address). Reported Achim Patzner <ap@bnc.net>. | |
2339 | ||
2340 | * Changes in ospfd | |
2341 | ||
2342 | ** Now ospfd receive OSPF packet. | |
2343 | \f | |
2344 | * Changes in zebra-19990319 snapshot | |
2345 | ||
2346 | * Changes in configuration and libraries | |
2347 | ||
2348 | ** User can disable IPv6 feature and/or pthread feature by configure | |
2349 | option. | |
2350 | ||
2351 | To disable IPv6: configure --disable-ipv6 | |
2352 | To disable pthread: configure --disable-pthread | |
2353 | ||
2354 | ** User can disable specified daemon by configure option. | |
2355 | ||
2356 | Don't make zebra: configure --disable-zebra | |
2357 | Don't make bgpd: configure --disable-bgpd | |
2358 | Don't make ripd: configure --disable-ripd | |
2359 | Don't make ripngd: configure --disable-ripngd | |
2360 | Don't make ospfd: configure --disable-ospfd | |
2361 | Don't make ospf6d: configure --disable-ospf6d | |
2362 | ||
2363 | ** Sample configuration files are installed as 600 file flag. | |
2364 | Suggested by Jeroen Ruigrok/Asmodai <asmodai@wxs.nl>. | |
2365 | ||
2366 | ** syslog logging feature is added by Peter Galbavy | |
2367 | <Peter.Galbavy@knowledge.com> | |
2368 | ||
2369 | ** Inclusion of standard header files is reworked by Peter Galbavy | |
2370 | <Peter.Galbavy@knowledge.com> | |
2371 | ||
2372 | ** Change description from GNU/Linux 2.1.X to GNU/Linux 2.2.X | |
2373 | ||
2374 | ** If daemon function exists in standard C library use it. | |
2375 | ||
2376 | ** To generate configure script we upgrade autoconf to 2.13. To | |
2377 | generate Makefile.in we upgrade automake to 1.4. | |
2378 | ||
2379 | ** doc/texinfo.tex is added to distribution. | |
2380 | ||
2381 | ** Update ports/pkg/DESCR description. | |
2382 | ||
2383 | ** Update doc/zebra.texi. | |
2384 | ||
2385 | ** logfile FILENAME statement deleted. Instead of that please use log | |
2386 | file FILENAME. | |
2387 | ||
2388 | * Changes in zebra | |
2389 | ||
2390 | * Changes in bgpd | |
2391 | ||
2392 | ** Communication between zebra and bgpd works now. So if there is | |
2393 | `router zebra' line in bgpd.conf, selected route is installed | |
2394 | into kernel routing table. | |
2395 | ||
2396 | ** Delete all routes which inserted by bgpd when bgpd dies. If you | |
2397 | want to retain routes even bgpd dies please specify [-r|--retain] | |
2398 | option to bgpd. | |
2399 | ||
2400 | ** BGP announcement code is reworked. Now bgpd announce selected | |
2401 | routes to other peer. | |
2402 | ||
2403 | ** All output bgp packet is buffered. It's written to the socket when | |
2404 | it gets ready. | |
2405 | ||
2406 | ** Output route-map works now. You can specify output route-map by: | |
2407 | ||
2408 | neighbor IP_ADDR route-map ROUTE_MAP_NAME out | |
2409 | ||
2410 | ** New route-map command added. | |
2411 | ||
2412 | set ip nexthop IP_ADDR | |
2413 | set ipv6 nexthop global IP_ADDR | |
2414 | ||
2415 | ** Fix bug about unlock of the route_node structure. | |
2416 | ||
2417 | ** BGP-4+ support is added. bgpd can listen and speak BGP-4+ packet | |
2418 | specified in RFC2283. You can view IPv6 bgp table by: `show ipv6 bgp'. | |
2419 | ||
2420 | ** Meny packet overflow check is added. | |
2421 | ||
2422 | * Changes in ripd | |
2423 | ||
2424 | * Changes in ripngd | |
2425 | ||
2426 | * Changes in ospfd | |
2427 | ||
2428 | ** ospfd work is started by Toshiaki Takada <takada@zebra.org>. Now | |
2429 | several files are included in ospfd directory. | |
2430 | ||
2431 | ** ospf6d codes are merged from Yasuhiro Ohara <yasu@sfc.wide.ad.jp>'s | |
2432 | ospfd work. Now codes are located in ospf6d directory. | |
2433 | ||
2434 | \f | |
2435 | Local variables: | |
2436 | mode: outline | |
2437 | paragraph-separate: "[ \f]*$" | |
2438 | end: |