extract-odp-netlink-windows-dp-h: add definition of IFNAMSIZ

[mirror_ovs.git] / OPENFLOW-1.1+

                OpenFlow 1.1+ support in Open vSwitch
                =====================================

Open vSwitch support for OpenFlow 1.1 and beyond is a work in
progress.  This file describes the work still to be done.

The Plan
--------

OpenFlow version support is not a build-time option.  A single build
of Open vSwitch must be able to handle all supported versions of
OpenFlow.  Ideally, even at runtime it should be able to support all
protocol versions at the same time on different OpenFlow bridges (and
perhaps even on the same bridge).

At the same time, it would be a shame to litter the core of the OVS
code with lots of ugly code concerned with the details of various
OpenFlow protocol versions.

The primary approach to compatibility is to abstract most of the
details of the differences from the core code, by adding a protocol
layer that translates between OF1.x and a slightly higher-level
abstract representation.  The core of this approach is the many struct
ofputil_* structures in lib/ofp-util.h.

As a consequence of this approach, OVS cannot use OpenFlow protocol
definitions that closely resemble those in the OpenFlow specification,
because openflow.h in different versions of the OpenFlow specification
defines the same identifier with different values.  Instead,
openflow-common.h contains definitions that are common to all the
specifications and separate protocol version-specific headers contain
protocol-specific definitions renamed so as not to conflict,
e.g. OFPAT10_ENQUEUE and OFPAT11_ENQUEUE for the OpenFlow 1.0 and 1.1
values for OFPAT_ENQUEUE.  Generally, in cases of conflict, the
protocol layer will define a more abstract OFPUTIL_* or struct
ofputil_*.

Here are the current approaches in a few tricky areas:

    * Port numbering.  OpenFlow 1.0 has 16-bit port numbers and later
      OpenFlow versions have 32-bit port numbers.  For now, OVS
      support for later protocol versions requires all port numbers to
      fall into the 16-bit range, translating the reserved OFPP_* port
      numbers.

    * Actions.  OpenFlow 1.0 and later versions have very different
      ideas of actions.  OVS reconciles by translating all the
      versions' actions (and instructions) to and from a common
      internal representation.

OpenFlow 1.1
------------

The list of remaining work items for OpenFlow 1.1 is below.  It is
probably incomplete.

    * Match and set double-tagged VLANs (QinQ).  This requires kernel
      work for reasonable performance.
      [optional for OF1.1+]

    * VLANs tagged with 88a8 Ethertype.  This requires kernel work for
      reasonable performance.
      [required for OF1.1+]

OpenFlow 1.2
------------

OpenFlow 1.2 support requires OpenFlow 1.1 as a prerequisite. All the
additional work specific to Openflow 1.2 are complete.  (This is based
on the change log at the end of the OF1.2 spec.  I didn't compare the
specs carefully yet.)

OpenFlow 1.3
------------

OpenFlow 1.3 support requires OpenFlow 1.2 as a prerequisite, plus the
following additional work.  (This is based on the change log at the
end of the OF1.3 spec, reusing most of the section titles directly.  I
didn't compare the specs carefully yet.)

    * Add support for multipart requests.
      Currently we always report OFPBRC_MULTIPART_BUFFER_OVERFLOW.
      [optional for OF1.3+]

    * IPv6 extension header handling support.  Fully implementing this
      requires kernel support.  This likely will take some careful and
      probably time-consuming design work.  The actual coding, once
      that is all done, is probably 2 or 3 days work.
      [optional for OF1.3+]

    * Per-flow meters.  OpenFlow protocol support is now implemented.
      Support for the special OFPM_SLOWPATH and OFPM_CONTROLLER meters
      is missing.  Support for the software switch is under review.
      [optional for OF1.3+]

    * Auxiliary connections.  An implementation in generic code might
      be a week's worth of work.  The value of an implementation in
      generic code is questionable, though, since much of the benefit
      of axuiliary connections is supposed to be to take advantage of
      hardware support.  (We could make the kernel module somehow
      send packets across the auxiliary connections directly, for
      some kind of "hardware" support, if we judged it useful enough.)
      [optional for OF1.3+]

    * Provider Backbone Bridge tagging.  I don't plan to implement
      this (but we'd accept an implementation).
      [optional for OF1.3+]

    * On-demand flow counters.  I think this might be a real
      optimization in some cases for the software switch.
      [optional for OF1.3+]

ONF OpenFlow Exensions for 1.3.X Pack1
--------------------------------------

OpenFlow 1.3 has a bunch of ONF extentions.
Many of them are necessary for OpenFlow 1.4 as well.

    * Flow entry notifications
      This seems to be modelled after OVS's NXST_FLOW_MONITOR.
      (Simon Horman is working on this.)
      [EXT-187]
      [required for OF1.4+]

    * Role Status
      [EXT-191]
      [required for OF1.4+]

    * Flow entry eviction
      OVS has flow eviction functionality.
      table_mod OFPTC_EVICTION, flow_mod 'importance', and
      table_desc ofp_table_mod_prop_eviction need to be implemented.
      [EXT-192-e]
      [optional for OF1.4+]

    * Vacancy events
      [EXT-192-v]
      [optional for OF1.4+]

    * Bundle
      Transactional modification.  OpenFlow 1.4 requires to support
      flow_mods and port_mods in a bundle.
      (Not related to OVS's 'ofbundle' stuff.)
      [EXT-230]
      [required for OF1.4+]

    * Table synchronisation
      [EXT-232]
      [optional for OF1.4+]

    * Group notifications
      [EXT-235]
      [optional for OF1.4+]

    * Bad flow entry priority error
      Probably not so useful to the software switch.
      [EXT-236]
      [optional for OF1.4+]

    * Set async config error
      [EXT-237]
      [optional for OF1.4+]

    * PBB UCA header field
      [EXT-256]
      [optional for OF1.4+]

    * Multipart timeout error
      [EXT-264]
      [required for OF1.4+]

OpenFlow 1.4
------------

    * More extensible wire protocol
      Many on-wire structures got TLVs.
      [EXT-262]
      [required for OF1.4+]

    * More descriptive reasons for packet-in
      Distinguish OFPR_APPLY_ACTION, OFPR_ACTION_SET, OFPR_GROUP,
      OFPR_PACKET_OUT.  NO_MATCH was renamed to OFPR_TABLE_MISS.
      [EXT-136]
      [required for OF1.4+]

    * Optical port properties
      [EXT-154]
      [optional for OF1.4+]

    * Meter notifications
      [EXT-235]
      [optional for OF1.4+]

General
-----

    * ovs-ofctl(8) often lists as Nicira extensions features that
      later OpenFlow versions support in standard ways.

How to contribute
-----------------

If you plan to contribute code for a feature, please let everyone know
on ovs-dev before you start work.  This will help avoid duplicating
work.

Please consider the following:

    * Testing.  Please test your code.

    * Unit tests.  Please consider writing some.  The tests directory
      has many examples that you can use as a starting point.

    * ovs-ofctl.  If you add a feature that is useful for some
      ovs-ofctl command then you should add support for it there.

    * Documentation.  If you add a user-visible feature, then you
      should document it in the appropriate manpage and mention it in
      NEWS as well.

    * Coding style (see the CodingStyle file at the top of the source
      tree).

    * The patch submission guidelines (see CONTRIBUTING).  I
      recommend using "git send-email", which automatically follows a
      lot of those guidelines.

Bug Reporting
-------------

Please report problems to bugs@openvswitch.org.