]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/arch/alpha/kernel/sys_dp264.c | |
3 | * | |
4 | * Copyright (C) 1995 David A Rusling | |
5 | * Copyright (C) 1996, 1999 Jay A Estabrook | |
6 | * Copyright (C) 1998, 1999 Richard Henderson | |
7 | * | |
8 | * Modified by Christopher C. Chimelis, 2001 to | |
9 | * add support for the addition of Shark to the | |
10 | * Tsunami family. | |
11 | * | |
12 | * Code supporting the DP264 (EV6+TSUNAMI). | |
13 | */ | |
14 | ||
1da177e4 LT |
15 | #include <linux/kernel.h> |
16 | #include <linux/types.h> | |
17 | #include <linux/mm.h> | |
18 | #include <linux/sched.h> | |
19 | #include <linux/pci.h> | |
20 | #include <linux/init.h> | |
21 | #include <linux/bitops.h> | |
22 | ||
23 | #include <asm/ptrace.h> | |
24 | #include <asm/system.h> | |
25 | #include <asm/dma.h> | |
26 | #include <asm/irq.h> | |
27 | #include <asm/mmu_context.h> | |
28 | #include <asm/io.h> | |
29 | #include <asm/pgtable.h> | |
30 | #include <asm/core_tsunami.h> | |
31 | #include <asm/hwrpb.h> | |
32 | #include <asm/tlbflush.h> | |
33 | ||
34 | #include "proto.h" | |
35 | #include "irq_impl.h" | |
36 | #include "pci_impl.h" | |
37 | #include "machvec_impl.h" | |
38 | ||
39 | ||
40 | /* Note mask bit is true for ENABLED irqs. */ | |
41 | static unsigned long cached_irq_mask; | |
42 | /* dp264 boards handle at max four CPUs */ | |
43 | static unsigned long cpu_irq_affinity[4] = { 0UL, 0UL, 0UL, 0UL }; | |
44 | ||
45 | DEFINE_SPINLOCK(dp264_irq_lock); | |
46 | ||
47 | static void | |
48 | tsunami_update_irq_hw(unsigned long mask) | |
49 | { | |
50 | register tsunami_cchip *cchip = TSUNAMI_cchip; | |
51 | unsigned long isa_enable = 1UL << 55; | |
52 | register int bcpu = boot_cpuid; | |
53 | ||
54 | #ifdef CONFIG_SMP | |
55 | volatile unsigned long *dim0, *dim1, *dim2, *dim3; | |
56 | unsigned long mask0, mask1, mask2, mask3, dummy; | |
57 | ||
58 | mask &= ~isa_enable; | |
59 | mask0 = mask & cpu_irq_affinity[0]; | |
60 | mask1 = mask & cpu_irq_affinity[1]; | |
61 | mask2 = mask & cpu_irq_affinity[2]; | |
62 | mask3 = mask & cpu_irq_affinity[3]; | |
63 | ||
64 | if (bcpu == 0) mask0 |= isa_enable; | |
65 | else if (bcpu == 1) mask1 |= isa_enable; | |
66 | else if (bcpu == 2) mask2 |= isa_enable; | |
67 | else mask3 |= isa_enable; | |
68 | ||
69 | dim0 = &cchip->dim0.csr; | |
70 | dim1 = &cchip->dim1.csr; | |
71 | dim2 = &cchip->dim2.csr; | |
72 | dim3 = &cchip->dim3.csr; | |
73 | if (!cpu_possible(0)) dim0 = &dummy; | |
74 | if (!cpu_possible(1)) dim1 = &dummy; | |
75 | if (!cpu_possible(2)) dim2 = &dummy; | |
76 | if (!cpu_possible(3)) dim3 = &dummy; | |
77 | ||
78 | *dim0 = mask0; | |
79 | *dim1 = mask1; | |
80 | *dim2 = mask2; | |
81 | *dim3 = mask3; | |
82 | mb(); | |
83 | *dim0; | |
84 | *dim1; | |
85 | *dim2; | |
86 | *dim3; | |
87 | #else | |
88 | volatile unsigned long *dimB; | |
89 | if (bcpu == 0) dimB = &cchip->dim0.csr; | |
90 | else if (bcpu == 1) dimB = &cchip->dim1.csr; | |
91 | else if (bcpu == 2) dimB = &cchip->dim2.csr; | |
92 | else dimB = &cchip->dim3.csr; | |
93 | ||
94 | *dimB = mask | isa_enable; | |
95 | mb(); | |
96 | *dimB; | |
97 | #endif | |
98 | } | |
99 | ||
100 | static void | |
d677f450 | 101 | dp264_enable_irq(struct irq_data *d) |
1da177e4 LT |
102 | { |
103 | spin_lock(&dp264_irq_lock); | |
d677f450 | 104 | cached_irq_mask |= 1UL << d->irq; |
1da177e4 LT |
105 | tsunami_update_irq_hw(cached_irq_mask); |
106 | spin_unlock(&dp264_irq_lock); | |
107 | } | |
108 | ||
109 | static void | |
d677f450 | 110 | dp264_disable_irq(struct irq_data *d) |
1da177e4 LT |
111 | { |
112 | spin_lock(&dp264_irq_lock); | |
d677f450 | 113 | cached_irq_mask &= ~(1UL << d->irq); |
1da177e4 LT |
114 | tsunami_update_irq_hw(cached_irq_mask); |
115 | spin_unlock(&dp264_irq_lock); | |
116 | } | |
117 | ||
1da177e4 | 118 | static void |
d677f450 | 119 | clipper_enable_irq(struct irq_data *d) |
1da177e4 LT |
120 | { |
121 | spin_lock(&dp264_irq_lock); | |
d677f450 | 122 | cached_irq_mask |= 1UL << (d->irq - 16); |
1da177e4 LT |
123 | tsunami_update_irq_hw(cached_irq_mask); |
124 | spin_unlock(&dp264_irq_lock); | |
125 | } | |
126 | ||
127 | static void | |
d677f450 | 128 | clipper_disable_irq(struct irq_data *d) |
1da177e4 LT |
129 | { |
130 | spin_lock(&dp264_irq_lock); | |
d677f450 | 131 | cached_irq_mask &= ~(1UL << (d->irq - 16)); |
1da177e4 LT |
132 | tsunami_update_irq_hw(cached_irq_mask); |
133 | spin_unlock(&dp264_irq_lock); | |
134 | } | |
135 | ||
1da177e4 LT |
136 | static void |
137 | cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity) | |
138 | { | |
139 | int cpu; | |
140 | ||
141 | for (cpu = 0; cpu < 4; cpu++) { | |
142 | unsigned long aff = cpu_irq_affinity[cpu]; | |
143 | if (cpu_isset(cpu, affinity)) | |
144 | aff |= 1UL << irq; | |
145 | else | |
146 | aff &= ~(1UL << irq); | |
147 | cpu_irq_affinity[cpu] = aff; | |
148 | } | |
149 | } | |
150 | ||
d5dedd45 | 151 | static int |
d677f450 TG |
152 | dp264_set_affinity(struct irq_data *d, const struct cpumask *affinity, |
153 | bool force) | |
154 | { | |
1da177e4 | 155 | spin_lock(&dp264_irq_lock); |
d677f450 | 156 | cpu_set_irq_affinity(d->irq, *affinity); |
1da177e4 LT |
157 | tsunami_update_irq_hw(cached_irq_mask); |
158 | spin_unlock(&dp264_irq_lock); | |
d5dedd45 YL |
159 | |
160 | return 0; | |
1da177e4 LT |
161 | } |
162 | ||
d5dedd45 | 163 | static int |
d677f450 TG |
164 | clipper_set_affinity(struct irq_data *d, const struct cpumask *affinity, |
165 | bool force) | |
166 | { | |
1da177e4 | 167 | spin_lock(&dp264_irq_lock); |
d677f450 | 168 | cpu_set_irq_affinity(d->irq - 16, *affinity); |
1da177e4 LT |
169 | tsunami_update_irq_hw(cached_irq_mask); |
170 | spin_unlock(&dp264_irq_lock); | |
d5dedd45 YL |
171 | |
172 | return 0; | |
1da177e4 LT |
173 | } |
174 | ||
44377f62 | 175 | static struct irq_chip dp264_irq_type = { |
d677f450 TG |
176 | .name = "DP264", |
177 | .irq_unmask = dp264_enable_irq, | |
178 | .irq_mask = dp264_disable_irq, | |
179 | .irq_mask_ack = dp264_disable_irq, | |
180 | .irq_set_affinity = dp264_set_affinity, | |
1da177e4 LT |
181 | }; |
182 | ||
44377f62 | 183 | static struct irq_chip clipper_irq_type = { |
d677f450 TG |
184 | .name = "CLIPPER", |
185 | .irq_unmask = clipper_enable_irq, | |
186 | .irq_mask = clipper_disable_irq, | |
187 | .irq_mask_ack = clipper_disable_irq, | |
188 | .irq_set_affinity = clipper_set_affinity, | |
1da177e4 LT |
189 | }; |
190 | ||
191 | static void | |
7ca56053 | 192 | dp264_device_interrupt(unsigned long vector) |
1da177e4 LT |
193 | { |
194 | #if 1 | |
7f2d889c | 195 | printk("dp264_device_interrupt: NOT IMPLEMENTED YET!!\n"); |
1da177e4 LT |
196 | #else |
197 | unsigned long pld; | |
198 | unsigned int i; | |
199 | ||
200 | /* Read the interrupt summary register of TSUNAMI */ | |
201 | pld = TSUNAMI_cchip->dir0.csr; | |
202 | ||
203 | /* | |
204 | * Now for every possible bit set, work through them and call | |
205 | * the appropriate interrupt handler. | |
206 | */ | |
207 | while (pld) { | |
208 | i = ffz(~pld); | |
209 | pld &= pld - 1; /* clear least bit set */ | |
210 | if (i == 55) | |
7ca56053 | 211 | isa_device_interrupt(vector); |
1da177e4 | 212 | else |
3dbb8c62 | 213 | handle_irq(16 + i); |
1da177e4 LT |
214 | #if 0 |
215 | TSUNAMI_cchip->dir0.csr = 1UL << i; mb(); | |
216 | tmp = TSUNAMI_cchip->dir0.csr; | |
217 | #endif | |
218 | } | |
219 | #endif | |
220 | } | |
221 | ||
222 | static void | |
7ca56053 | 223 | dp264_srm_device_interrupt(unsigned long vector) |
1da177e4 LT |
224 | { |
225 | int irq; | |
226 | ||
227 | irq = (vector - 0x800) >> 4; | |
228 | ||
229 | /* | |
230 | * The SRM console reports PCI interrupts with a vector calculated by: | |
231 | * | |
232 | * 0x900 + (0x10 * DRIR-bit) | |
233 | * | |
234 | * So bit 16 shows up as IRQ 32, etc. | |
235 | * | |
236 | * On DP264/BRICK/MONET, we adjust it down by 16 because at least | |
237 | * that many of the low order bits of the DRIR are not used, and | |
238 | * so we don't count them. | |
239 | */ | |
240 | if (irq >= 32) | |
241 | irq -= 16; | |
242 | ||
3dbb8c62 | 243 | handle_irq(irq); |
1da177e4 LT |
244 | } |
245 | ||
246 | static void | |
7ca56053 | 247 | clipper_srm_device_interrupt(unsigned long vector) |
1da177e4 LT |
248 | { |
249 | int irq; | |
250 | ||
251 | irq = (vector - 0x800) >> 4; | |
252 | ||
253 | /* | |
254 | * The SRM console reports PCI interrupts with a vector calculated by: | |
255 | * | |
256 | * 0x900 + (0x10 * DRIR-bit) | |
257 | * | |
258 | * So bit 16 shows up as IRQ 32, etc. | |
259 | * | |
260 | * CLIPPER uses bits 8-47 for PCI interrupts, so we do not need | |
261 | * to scale down the vector reported, we just use it. | |
262 | * | |
263 | * Eg IRQ 24 is DRIR bit 8, etc, etc | |
264 | */ | |
3dbb8c62 | 265 | handle_irq(irq); |
1da177e4 LT |
266 | } |
267 | ||
268 | static void __init | |
44377f62 | 269 | init_tsunami_irqs(struct irq_chip * ops, int imin, int imax) |
1da177e4 LT |
270 | { |
271 | long i; | |
272 | for (i = imin; i <= imax; ++i) { | |
7d209c81 | 273 | set_irq_chip_and_handler(i, ops, handle_level_irq); |
d677f450 | 274 | irq_set_status_flags(i, IRQ_LEVEL); |
1da177e4 LT |
275 | } |
276 | } | |
277 | ||
278 | static void __init | |
279 | dp264_init_irq(void) | |
280 | { | |
281 | outb(0, DMA1_RESET_REG); | |
282 | outb(0, DMA2_RESET_REG); | |
283 | outb(DMA_MODE_CASCADE, DMA2_MODE_REG); | |
284 | outb(0, DMA2_MASK_REG); | |
285 | ||
286 | if (alpha_using_srm) | |
287 | alpha_mv.device_interrupt = dp264_srm_device_interrupt; | |
288 | ||
289 | tsunami_update_irq_hw(0); | |
290 | ||
291 | init_i8259a_irqs(); | |
292 | init_tsunami_irqs(&dp264_irq_type, 16, 47); | |
293 | } | |
294 | ||
295 | static void __init | |
296 | clipper_init_irq(void) | |
297 | { | |
298 | outb(0, DMA1_RESET_REG); | |
299 | outb(0, DMA2_RESET_REG); | |
300 | outb(DMA_MODE_CASCADE, DMA2_MODE_REG); | |
301 | outb(0, DMA2_MASK_REG); | |
302 | ||
303 | if (alpha_using_srm) | |
304 | alpha_mv.device_interrupt = clipper_srm_device_interrupt; | |
305 | ||
306 | tsunami_update_irq_hw(0); | |
307 | ||
308 | init_i8259a_irqs(); | |
309 | init_tsunami_irqs(&clipper_irq_type, 24, 63); | |
310 | } | |
311 | ||
312 | ||
313 | /* | |
314 | * PCI Fixup configuration. | |
315 | * | |
316 | * Summary @ TSUNAMI_CSR_DIM0: | |
317 | * Bit Meaning | |
318 | * 0-17 Unused | |
319 | *18 Interrupt SCSI B (Adaptec 7895 builtin) | |
320 | *19 Interrupt SCSI A (Adaptec 7895 builtin) | |
321 | *20 Interrupt Line D from slot 2 PCI0 | |
322 | *21 Interrupt Line C from slot 2 PCI0 | |
323 | *22 Interrupt Line B from slot 2 PCI0 | |
324 | *23 Interrupt Line A from slot 2 PCI0 | |
325 | *24 Interrupt Line D from slot 1 PCI0 | |
326 | *25 Interrupt Line C from slot 1 PCI0 | |
327 | *26 Interrupt Line B from slot 1 PCI0 | |
328 | *27 Interrupt Line A from slot 1 PCI0 | |
329 | *28 Interrupt Line D from slot 0 PCI0 | |
330 | *29 Interrupt Line C from slot 0 PCI0 | |
331 | *30 Interrupt Line B from slot 0 PCI0 | |
332 | *31 Interrupt Line A from slot 0 PCI0 | |
333 | * | |
334 | *32 Interrupt Line D from slot 3 PCI1 | |
335 | *33 Interrupt Line C from slot 3 PCI1 | |
336 | *34 Interrupt Line B from slot 3 PCI1 | |
337 | *35 Interrupt Line A from slot 3 PCI1 | |
338 | *36 Interrupt Line D from slot 2 PCI1 | |
339 | *37 Interrupt Line C from slot 2 PCI1 | |
340 | *38 Interrupt Line B from slot 2 PCI1 | |
341 | *39 Interrupt Line A from slot 2 PCI1 | |
342 | *40 Interrupt Line D from slot 1 PCI1 | |
343 | *41 Interrupt Line C from slot 1 PCI1 | |
344 | *42 Interrupt Line B from slot 1 PCI1 | |
345 | *43 Interrupt Line A from slot 1 PCI1 | |
346 | *44 Interrupt Line D from slot 0 PCI1 | |
347 | *45 Interrupt Line C from slot 0 PCI1 | |
348 | *46 Interrupt Line B from slot 0 PCI1 | |
349 | *47 Interrupt Line A from slot 0 PCI1 | |
350 | *48-52 Unused | |
351 | *53 PCI0 NMI (from Cypress) | |
352 | *54 PCI0 SMI INT (from Cypress) | |
353 | *55 PCI0 ISA Interrupt (from Cypress) | |
354 | *56-60 Unused | |
355 | *61 PCI1 Bus Error | |
356 | *62 PCI0 Bus Error | |
357 | *63 Reserved | |
358 | * | |
359 | * IdSel | |
360 | * 5 Cypress Bridge I/O | |
361 | * 6 SCSI Adaptec builtin | |
362 | * 7 64 bit PCI option slot 0 (all busses) | |
363 | * 8 64 bit PCI option slot 1 (all busses) | |
364 | * 9 64 bit PCI option slot 2 (all busses) | |
365 | * 10 64 bit PCI option slot 3 (not bus 0) | |
366 | */ | |
367 | ||
997a51ae IK |
368 | static int __init |
369 | isa_irq_fixup(struct pci_dev *dev, int irq) | |
370 | { | |
371 | u8 irq8; | |
372 | ||
373 | if (irq > 0) | |
374 | return irq; | |
375 | ||
376 | /* This interrupt is routed via ISA bridge, so we'll | |
377 | just have to trust whatever value the console might | |
378 | have assigned. */ | |
379 | pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8); | |
380 | ||
381 | return irq8 & 0xf; | |
382 | } | |
383 | ||
1da177e4 LT |
384 | static int __init |
385 | dp264_map_irq(struct pci_dev *dev, u8 slot, u8 pin) | |
386 | { | |
387 | static char irq_tab[6][5] __initdata = { | |
388 | /*INT INTA INTB INTC INTD */ | |
389 | { -1, -1, -1, -1, -1}, /* IdSel 5 ISA Bridge */ | |
390 | { 16+ 3, 16+ 3, 16+ 2, 16+ 2, 16+ 2}, /* IdSel 6 SCSI builtin*/ | |
391 | { 16+15, 16+15, 16+14, 16+13, 16+12}, /* IdSel 7 slot 0 */ | |
392 | { 16+11, 16+11, 16+10, 16+ 9, 16+ 8}, /* IdSel 8 slot 1 */ | |
393 | { 16+ 7, 16+ 7, 16+ 6, 16+ 5, 16+ 4}, /* IdSel 9 slot 2 */ | |
394 | { 16+ 3, 16+ 3, 16+ 2, 16+ 1, 16+ 0} /* IdSel 10 slot 3 */ | |
395 | }; | |
396 | const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5; | |
1da177e4 LT |
397 | struct pci_controller *hose = dev->sysdata; |
398 | int irq = COMMON_TABLE_LOOKUP; | |
399 | ||
997a51ae | 400 | if (irq > 0) |
1da177e4 | 401 | irq += 16 * hose->index; |
1da177e4 | 402 | |
997a51ae | 403 | return isa_irq_fixup(dev, irq); |
1da177e4 LT |
404 | } |
405 | ||
406 | static int __init | |
407 | monet_map_irq(struct pci_dev *dev, u8 slot, u8 pin) | |
408 | { | |
409 | static char irq_tab[13][5] __initdata = { | |
410 | /*INT INTA INTB INTC INTD */ | |
411 | { 45, 45, 45, 45, 45}, /* IdSel 3 21143 PCI1 */ | |
412 | { -1, -1, -1, -1, -1}, /* IdSel 4 unused */ | |
413 | { -1, -1, -1, -1, -1}, /* IdSel 5 unused */ | |
414 | { 47, 47, 47, 47, 47}, /* IdSel 6 SCSI PCI1 */ | |
415 | { -1, -1, -1, -1, -1}, /* IdSel 7 ISA Bridge */ | |
416 | { -1, -1, -1, -1, -1}, /* IdSel 8 P2P PCI1 */ | |
417 | #if 1 | |
418 | { 28, 28, 29, 30, 31}, /* IdSel 14 slot 4 PCI2*/ | |
419 | { 24, 24, 25, 26, 27}, /* IdSel 15 slot 5 PCI2*/ | |
420 | #else | |
421 | { -1, -1, -1, -1, -1}, /* IdSel 9 unused */ | |
422 | { -1, -1, -1, -1, -1}, /* IdSel 10 unused */ | |
423 | #endif | |
424 | { 40, 40, 41, 42, 43}, /* IdSel 11 slot 1 PCI0*/ | |
425 | { 36, 36, 37, 38, 39}, /* IdSel 12 slot 2 PCI0*/ | |
426 | { 32, 32, 33, 34, 35}, /* IdSel 13 slot 3 PCI0*/ | |
427 | { 28, 28, 29, 30, 31}, /* IdSel 14 slot 4 PCI2*/ | |
428 | { 24, 24, 25, 26, 27} /* IdSel 15 slot 5 PCI2*/ | |
429 | }; | |
430 | const long min_idsel = 3, max_idsel = 15, irqs_per_slot = 5; | |
997a51ae IK |
431 | |
432 | return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP); | |
1da177e4 LT |
433 | } |
434 | ||
435 | static u8 __init | |
436 | monet_swizzle(struct pci_dev *dev, u8 *pinp) | |
437 | { | |
438 | struct pci_controller *hose = dev->sysdata; | |
439 | int slot, pin = *pinp; | |
440 | ||
441 | if (!dev->bus->parent) { | |
442 | slot = PCI_SLOT(dev->devfn); | |
443 | } | |
444 | /* Check for the built-in bridge on hose 1. */ | |
445 | else if (hose->index == 1 && PCI_SLOT(dev->bus->self->devfn) == 8) { | |
446 | slot = PCI_SLOT(dev->devfn); | |
447 | } else { | |
448 | /* Must be a card-based bridge. */ | |
449 | do { | |
450 | /* Check for built-in bridge on hose 1. */ | |
451 | if (hose->index == 1 && | |
452 | PCI_SLOT(dev->bus->self->devfn) == 8) { | |
453 | slot = PCI_SLOT(dev->devfn); | |
454 | break; | |
455 | } | |
1be9baa0 | 456 | pin = pci_swizzle_interrupt_pin(dev, pin); |
1da177e4 LT |
457 | |
458 | /* Move up the chain of bridges. */ | |
459 | dev = dev->bus->self; | |
460 | /* Slot of the next bridge. */ | |
461 | slot = PCI_SLOT(dev->devfn); | |
462 | } while (dev->bus->self); | |
463 | } | |
464 | *pinp = pin; | |
465 | return slot; | |
466 | } | |
467 | ||
468 | static int __init | |
469 | webbrick_map_irq(struct pci_dev *dev, u8 slot, u8 pin) | |
470 | { | |
471 | static char irq_tab[13][5] __initdata = { | |
472 | /*INT INTA INTB INTC INTD */ | |
473 | { -1, -1, -1, -1, -1}, /* IdSel 7 ISA Bridge */ | |
474 | { -1, -1, -1, -1, -1}, /* IdSel 8 unused */ | |
475 | { 29, 29, 29, 29, 29}, /* IdSel 9 21143 #1 */ | |
476 | { -1, -1, -1, -1, -1}, /* IdSel 10 unused */ | |
477 | { 30, 30, 30, 30, 30}, /* IdSel 11 21143 #2 */ | |
478 | { -1, -1, -1, -1, -1}, /* IdSel 12 unused */ | |
479 | { -1, -1, -1, -1, -1}, /* IdSel 13 unused */ | |
480 | { 35, 35, 34, 33, 32}, /* IdSel 14 slot 0 */ | |
481 | { 39, 39, 38, 37, 36}, /* IdSel 15 slot 1 */ | |
482 | { 43, 43, 42, 41, 40}, /* IdSel 16 slot 2 */ | |
483 | { 47, 47, 46, 45, 44}, /* IdSel 17 slot 3 */ | |
484 | }; | |
485 | const long min_idsel = 7, max_idsel = 17, irqs_per_slot = 5; | |
997a51ae IK |
486 | |
487 | return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP); | |
1da177e4 LT |
488 | } |
489 | ||
490 | static int __init | |
491 | clipper_map_irq(struct pci_dev *dev, u8 slot, u8 pin) | |
492 | { | |
493 | static char irq_tab[7][5] __initdata = { | |
494 | /*INT INTA INTB INTC INTD */ | |
495 | { 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 1 slot 1 */ | |
496 | { 16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 2 slot 2 */ | |
497 | { 16+16, 16+16, 16+17, 16+18, 16+19}, /* IdSel 3 slot 3 */ | |
498 | { 16+20, 16+20, 16+21, 16+22, 16+23}, /* IdSel 4 slot 4 */ | |
499 | { 16+24, 16+24, 16+25, 16+26, 16+27}, /* IdSel 5 slot 5 */ | |
500 | { 16+28, 16+28, 16+29, 16+30, 16+31}, /* IdSel 6 slot 6 */ | |
501 | { -1, -1, -1, -1, -1} /* IdSel 7 ISA Bridge */ | |
502 | }; | |
503 | const long min_idsel = 1, max_idsel = 7, irqs_per_slot = 5; | |
1da177e4 LT |
504 | struct pci_controller *hose = dev->sysdata; |
505 | int irq = COMMON_TABLE_LOOKUP; | |
506 | ||
507 | if (irq > 0) | |
508 | irq += 16 * hose->index; | |
509 | ||
997a51ae | 510 | return isa_irq_fixup(dev, irq); |
1da177e4 LT |
511 | } |
512 | ||
513 | static void __init | |
514 | dp264_init_pci(void) | |
515 | { | |
516 | common_init_pci(); | |
517 | SMC669_Init(0); | |
025a2215 | 518 | locate_and_init_vga(NULL); |
1da177e4 LT |
519 | } |
520 | ||
521 | static void __init | |
522 | monet_init_pci(void) | |
523 | { | |
524 | common_init_pci(); | |
525 | SMC669_Init(1); | |
526 | es1888_init(); | |
025a2215 JE |
527 | locate_and_init_vga(NULL); |
528 | } | |
529 | ||
530 | static void __init | |
531 | clipper_init_pci(void) | |
532 | { | |
533 | common_init_pci(); | |
534 | locate_and_init_vga(NULL); | |
1da177e4 LT |
535 | } |
536 | ||
537 | static void __init | |
538 | webbrick_init_arch(void) | |
539 | { | |
540 | tsunami_init_arch(); | |
541 | ||
542 | /* Tsunami caches 4 PTEs at a time; DS10 has only 1 hose. */ | |
543 | hose_head->sg_isa->align_entry = 4; | |
544 | hose_head->sg_pci->align_entry = 4; | |
545 | } | |
546 | ||
547 | ||
548 | /* | |
549 | * The System Vectors | |
550 | */ | |
551 | ||
552 | struct alpha_machine_vector dp264_mv __initmv = { | |
553 | .vector_name = "DP264", | |
554 | DO_EV6_MMU, | |
555 | DO_DEFAULT_RTC, | |
556 | DO_TSUNAMI_IO, | |
557 | .machine_check = tsunami_machine_check, | |
558 | .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, | |
559 | .min_io_address = DEFAULT_IO_BASE, | |
560 | .min_mem_address = DEFAULT_MEM_BASE, | |
561 | .pci_dac_offset = TSUNAMI_DAC_OFFSET, | |
562 | ||
563 | .nr_irqs = 64, | |
564 | .device_interrupt = dp264_device_interrupt, | |
565 | ||
566 | .init_arch = tsunami_init_arch, | |
567 | .init_irq = dp264_init_irq, | |
568 | .init_rtc = common_init_rtc, | |
569 | .init_pci = dp264_init_pci, | |
570 | .kill_arch = tsunami_kill_arch, | |
571 | .pci_map_irq = dp264_map_irq, | |
572 | .pci_swizzle = common_swizzle, | |
573 | }; | |
574 | ALIAS_MV(dp264) | |
575 | ||
576 | struct alpha_machine_vector monet_mv __initmv = { | |
577 | .vector_name = "Monet", | |
578 | DO_EV6_MMU, | |
579 | DO_DEFAULT_RTC, | |
580 | DO_TSUNAMI_IO, | |
581 | .machine_check = tsunami_machine_check, | |
582 | .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, | |
583 | .min_io_address = DEFAULT_IO_BASE, | |
584 | .min_mem_address = DEFAULT_MEM_BASE, | |
585 | .pci_dac_offset = TSUNAMI_DAC_OFFSET, | |
586 | ||
587 | .nr_irqs = 64, | |
588 | .device_interrupt = dp264_device_interrupt, | |
589 | ||
590 | .init_arch = tsunami_init_arch, | |
591 | .init_irq = dp264_init_irq, | |
592 | .init_rtc = common_init_rtc, | |
593 | .init_pci = monet_init_pci, | |
594 | .kill_arch = tsunami_kill_arch, | |
595 | .pci_map_irq = monet_map_irq, | |
596 | .pci_swizzle = monet_swizzle, | |
597 | }; | |
598 | ||
599 | struct alpha_machine_vector webbrick_mv __initmv = { | |
600 | .vector_name = "Webbrick", | |
601 | DO_EV6_MMU, | |
602 | DO_DEFAULT_RTC, | |
603 | DO_TSUNAMI_IO, | |
604 | .machine_check = tsunami_machine_check, | |
605 | .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, | |
606 | .min_io_address = DEFAULT_IO_BASE, | |
607 | .min_mem_address = DEFAULT_MEM_BASE, | |
608 | .pci_dac_offset = TSUNAMI_DAC_OFFSET, | |
609 | ||
610 | .nr_irqs = 64, | |
611 | .device_interrupt = dp264_device_interrupt, | |
612 | ||
613 | .init_arch = webbrick_init_arch, | |
614 | .init_irq = dp264_init_irq, | |
615 | .init_rtc = common_init_rtc, | |
616 | .init_pci = common_init_pci, | |
617 | .kill_arch = tsunami_kill_arch, | |
618 | .pci_map_irq = webbrick_map_irq, | |
619 | .pci_swizzle = common_swizzle, | |
620 | }; | |
621 | ||
622 | struct alpha_machine_vector clipper_mv __initmv = { | |
623 | .vector_name = "Clipper", | |
624 | DO_EV6_MMU, | |
625 | DO_DEFAULT_RTC, | |
626 | DO_TSUNAMI_IO, | |
627 | .machine_check = tsunami_machine_check, | |
628 | .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, | |
629 | .min_io_address = DEFAULT_IO_BASE, | |
630 | .min_mem_address = DEFAULT_MEM_BASE, | |
631 | .pci_dac_offset = TSUNAMI_DAC_OFFSET, | |
632 | ||
633 | .nr_irqs = 64, | |
634 | .device_interrupt = dp264_device_interrupt, | |
635 | ||
636 | .init_arch = tsunami_init_arch, | |
637 | .init_irq = clipper_init_irq, | |
638 | .init_rtc = common_init_rtc, | |
025a2215 | 639 | .init_pci = clipper_init_pci, |
1da177e4 LT |
640 | .kill_arch = tsunami_kill_arch, |
641 | .pci_map_irq = clipper_map_irq, | |
642 | .pci_swizzle = common_swizzle, | |
643 | }; | |
644 | ||
645 | /* Sharks strongly resemble Clipper, at least as far | |
646 | * as interrupt routing, etc, so we're using the | |
647 | * same functions as Clipper does | |
648 | */ | |
649 | ||
650 | struct alpha_machine_vector shark_mv __initmv = { | |
651 | .vector_name = "Shark", | |
652 | DO_EV6_MMU, | |
653 | DO_DEFAULT_RTC, | |
654 | DO_TSUNAMI_IO, | |
655 | .machine_check = tsunami_machine_check, | |
656 | .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, | |
657 | .min_io_address = DEFAULT_IO_BASE, | |
658 | .min_mem_address = DEFAULT_MEM_BASE, | |
659 | .pci_dac_offset = TSUNAMI_DAC_OFFSET, | |
660 | ||
661 | .nr_irqs = 64, | |
662 | .device_interrupt = dp264_device_interrupt, | |
663 | ||
664 | .init_arch = tsunami_init_arch, | |
665 | .init_irq = clipper_init_irq, | |
666 | .init_rtc = common_init_rtc, | |
667 | .init_pci = common_init_pci, | |
668 | .kill_arch = tsunami_kill_arch, | |
669 | .pci_map_irq = clipper_map_irq, | |
670 | .pci_swizzle = common_swizzle, | |
671 | }; | |
672 | ||
673 | /* No alpha_mv alias for webbrick/monet/clipper, since we compile them | |
674 | in unconditionally with DP264; setup_arch knows how to cope. */ |