]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | config ARM |
2 | bool | |
3 | default y | |
b1b3f49c | 4 | select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE |
21266be9 | 5 | select ARCH_HAS_DEVMEM_IS_ALLOWED |
2b68f6ca | 6 | select ARCH_HAS_ELF_RANDOMIZE |
3d06770e | 7 | select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST |
171b3f0d | 8 | select ARCH_HAVE_CUSTOM_GPIO_H |
957e3fac | 9 | select ARCH_HAS_GCOV_PROFILE_ALL |
d7018848 | 10 | select ARCH_MIGHT_HAVE_PC_PARPORT |
4badad35 | 11 | select ARCH_SUPPORTS_ATOMIC_RMW |
017f161a | 12 | select ARCH_USE_BUILTIN_BSWAP |
0cbad9c9 | 13 | select ARCH_USE_CMPXCHG_LOCKREF |
b1b3f49c | 14 | select ARCH_WANT_IPC_PARSE_VERSION |
ee951c63 | 15 | select BUILDTIME_EXTABLE_SORT if MMU |
171b3f0d | 16 | select CLONE_BACKWARDS |
b1b3f49c | 17 | select CPU_PM if (SUSPEND || CPU_IDLE) |
dce5c9e3 | 18 | select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS |
b01aec9b BP |
19 | select EDAC_SUPPORT |
20 | select EDAC_ATOMIC_SCRUB | |
36d0fd21 | 21 | select GENERIC_ALLOCATOR |
4477ca45 | 22 | select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI) |
b1b3f49c | 23 | select GENERIC_CLOCKEVENTS_BROADCAST if SMP |
2937367b | 24 | select GENERIC_EARLY_IOREMAP |
171b3f0d | 25 | select GENERIC_IDLE_POLL_SETUP |
b1b3f49c RK |
26 | select GENERIC_IRQ_PROBE |
27 | select GENERIC_IRQ_SHOW | |
7c07005e | 28 | select GENERIC_IRQ_SHOW_LEVEL |
b1b3f49c | 29 | select GENERIC_PCI_IOMAP |
38ff87f7 | 30 | select GENERIC_SCHED_CLOCK |
b1b3f49c RK |
31 | select GENERIC_SMP_IDLE_THREAD |
32 | select GENERIC_STRNCPY_FROM_USER | |
33 | select GENERIC_STRNLEN_USER | |
a71b092a | 34 | select HANDLE_DOMAIN_IRQ |
b1b3f49c | 35 | select HARDIRQS_SW_RESEND |
7a017721 | 36 | select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT) |
0b7857db | 37 | select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 |
437682ee AB |
38 | select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU |
39 | select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU | |
e0c25d95 | 40 | select HAVE_ARCH_MMAP_RND_BITS if MMU |
91702175 | 41 | select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) |
0693bf68 | 42 | select HAVE_ARCH_TRACEHOOK |
b329f95d | 43 | select HAVE_ARM_SMCCC if CPU_V7 |
6077776b | 44 | select HAVE_CBPF_JIT |
51aaf81f | 45 | select HAVE_CC_STACKPROTECTOR |
171b3f0d | 46 | select HAVE_CONTEXT_TRACKING |
b1b3f49c RK |
47 | select HAVE_C_RECORDMCOUNT |
48 | select HAVE_DEBUG_KMEMLEAK | |
49 | select HAVE_DMA_API_DEBUG | |
b1b3f49c | 50 | select HAVE_DMA_CONTIGUOUS if MMU |
437682ee | 51 | select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU |
dce5c9e3 | 52 | select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU |
5f56a5df | 53 | select HAVE_EXIT_THREAD |
b1b3f49c | 54 | select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) |
0e341af8 | 55 | select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) |
b1b3f49c | 56 | select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) |
1fe53268 | 57 | select HAVE_GENERIC_DMA_COHERENT |
b1b3f49c RK |
58 | select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) |
59 | select HAVE_IDE if PCI || ISA || PCMCIA | |
87c46b6c | 60 | select HAVE_IRQ_TIME_ACCOUNTING |
e7db7b42 | 61 | select HAVE_KERNEL_GZIP |
f9b493ac | 62 | select HAVE_KERNEL_LZ4 |
6e8699f7 | 63 | select HAVE_KERNEL_LZMA |
b1b3f49c | 64 | select HAVE_KERNEL_LZO |
a7f464f3 | 65 | select HAVE_KERNEL_XZ |
cb1293e2 | 66 | select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M |
b1b3f49c RK |
67 | select HAVE_KRETPROBES if (HAVE_KPROBES) |
68 | select HAVE_MEMBLOCK | |
7d485f64 | 69 | select HAVE_MOD_ARCH_SPECIFIC |
42a0bb3f | 70 | select HAVE_NMI |
b1b3f49c | 71 | select HAVE_OPROFILE if (HAVE_PERF_EVENTS) |
0dc016db | 72 | select HAVE_OPTPROBES if !THUMB2_KERNEL |
7ada189f | 73 | select HAVE_PERF_EVENTS |
49863894 WD |
74 | select HAVE_PERF_REGS |
75 | select HAVE_PERF_USER_STACK_DUMP | |
a0ad5496 | 76 | select HAVE_RCU_TABLE_FREE if (SMP && ARM_LPAE) |
e513f8bf | 77 | select HAVE_REGS_AND_STACK_ACCESS_API |
b1b3f49c | 78 | select HAVE_SYSCALL_TRACEPOINTS |
af1839eb | 79 | select HAVE_UID16 |
31c1fc81 | 80 | select HAVE_VIRT_CPU_ACCOUNTING_GEN |
da0ec6f7 | 81 | select IRQ_FORCED_THREADING |
171b3f0d | 82 | select MODULES_USE_ELF_REL |
84f452b1 | 83 | select NO_BOOTMEM |
aa7d5f18 AB |
84 | select OF_EARLY_FLATTREE if OF |
85 | select OF_RESERVED_MEM if OF | |
171b3f0d RK |
86 | select OLD_SIGACTION |
87 | select OLD_SIGSUSPEND3 | |
b1b3f49c RK |
88 | select PERF_USE_VMALLOC |
89 | select RTC_LIB | |
90 | select SYS_SUPPORTS_APM_EMULATION | |
171b3f0d RK |
91 | # Above selects are sorted alphabetically; please add new ones |
92 | # according to that. Thanks. | |
1da177e4 LT |
93 | help |
94 | The ARM series is a line of low-power-consumption RISC chip designs | |
f6c8965a | 95 | licensed by ARM Ltd and targeted at embedded applications and |
1da177e4 | 96 | handhelds such as the Compaq IPAQ. ARM-based PCs are no longer |
f6c8965a | 97 | manufactured, but legacy ARM-based PC hardware remains popular in |
1da177e4 LT |
98 | Europe. There is an ARM Linux project with a web page at |
99 | <http://www.arm.linux.org.uk/>. | |
100 | ||
74facffe | 101 | config ARM_HAS_SG_CHAIN |
308c09f1 | 102 | select ARCH_HAS_SG_CHAIN |
74facffe RK |
103 | bool |
104 | ||
4ce63fcd MS |
105 | config NEED_SG_DMA_LENGTH |
106 | bool | |
107 | ||
108 | config ARM_DMA_USE_IOMMU | |
4ce63fcd | 109 | bool |
b1b3f49c RK |
110 | select ARM_HAS_SG_CHAIN |
111 | select NEED_SG_DMA_LENGTH | |
4ce63fcd | 112 | |
60460abf SWK |
113 | if ARM_DMA_USE_IOMMU |
114 | ||
115 | config ARM_DMA_IOMMU_ALIGNMENT | |
116 | int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers" | |
117 | range 4 9 | |
118 | default 8 | |
119 | help | |
120 | DMA mapping framework by default aligns all buffers to the smallest | |
121 | PAGE_SIZE order which is greater than or equal to the requested buffer | |
122 | size. This works well for buffers up to a few hundreds kilobytes, but | |
123 | for larger buffers it just a waste of address space. Drivers which has | |
124 | relatively small addressing window (like 64Mib) might run out of | |
125 | virtual space with just a few allocations. | |
126 | ||
127 | With this parameter you can specify the maximum PAGE_SIZE order for | |
128 | DMA IOMMU buffers. Larger buffers will be aligned only to this | |
129 | specified order. The order is expressed as a power of two multiplied | |
130 | by the PAGE_SIZE. | |
131 | ||
132 | endif | |
133 | ||
0b05da72 HUK |
134 | config MIGHT_HAVE_PCI |
135 | bool | |
136 | ||
75e7153a RB |
137 | config SYS_SUPPORTS_APM_EMULATION |
138 | bool | |
139 | ||
bc581770 LW |
140 | config HAVE_TCM |
141 | bool | |
142 | select GENERIC_ALLOCATOR | |
143 | ||
e119bfff RK |
144 | config HAVE_PROC_CPU |
145 | bool | |
146 | ||
ce816fa8 | 147 | config NO_IOPORT_MAP |
5ea81769 | 148 | bool |
5ea81769 | 149 | |
1da177e4 LT |
150 | config EISA |
151 | bool | |
152 | ---help--- | |
153 | The Extended Industry Standard Architecture (EISA) bus was | |
154 | developed as an open alternative to the IBM MicroChannel bus. | |
155 | ||
156 | The EISA bus provided some of the features of the IBM MicroChannel | |
157 | bus while maintaining backward compatibility with cards made for | |
158 | the older ISA bus. The EISA bus saw limited use between 1988 and | |
159 | 1995 when it was made obsolete by the PCI bus. | |
160 | ||
161 | Say Y here if you are building a kernel for an EISA-based machine. | |
162 | ||
163 | Otherwise, say N. | |
164 | ||
165 | config SBUS | |
166 | bool | |
167 | ||
f16fb1ec RK |
168 | config STACKTRACE_SUPPORT |
169 | bool | |
170 | default y | |
171 | ||
172 | config LOCKDEP_SUPPORT | |
173 | bool | |
174 | default y | |
175 | ||
7ad1bcb2 RK |
176 | config TRACE_IRQFLAGS_SUPPORT |
177 | bool | |
cb1293e2 | 178 | default !CPU_V7M |
7ad1bcb2 | 179 | |
1da177e4 LT |
180 | config RWSEM_XCHGADD_ALGORITHM |
181 | bool | |
8a87411b | 182 | default y |
1da177e4 | 183 | |
f0d1b0b3 DH |
184 | config ARCH_HAS_ILOG2_U32 |
185 | bool | |
f0d1b0b3 DH |
186 | |
187 | config ARCH_HAS_ILOG2_U64 | |
188 | bool | |
f0d1b0b3 | 189 | |
4a1b5733 EV |
190 | config ARCH_HAS_BANDGAP |
191 | bool | |
192 | ||
a5f4c561 SA |
193 | config FIX_EARLYCON_MEM |
194 | def_bool y if MMU | |
195 | ||
b89c3b16 AM |
196 | config GENERIC_HWEIGHT |
197 | bool | |
198 | default y | |
199 | ||
1da177e4 LT |
200 | config GENERIC_CALIBRATE_DELAY |
201 | bool | |
202 | default y | |
203 | ||
a08b6b79 AV |
204 | config ARCH_MAY_HAVE_PC_FDC |
205 | bool | |
206 | ||
5ac6da66 CL |
207 | config ZONE_DMA |
208 | bool | |
5ac6da66 | 209 | |
ccd7ab7f FT |
210 | config NEED_DMA_MAP_STATE |
211 | def_bool y | |
212 | ||
c7edc9e3 DL |
213 | config ARCH_SUPPORTS_UPROBES |
214 | def_bool y | |
215 | ||
58af4a24 RH |
216 | config ARCH_HAS_DMA_SET_COHERENT_MASK |
217 | bool | |
218 | ||
1da177e4 LT |
219 | config GENERIC_ISA_DMA |
220 | bool | |
221 | ||
1da177e4 LT |
222 | config FIQ |
223 | bool | |
224 | ||
13a5045d RH |
225 | config NEED_RET_TO_USER |
226 | bool | |
227 | ||
034d2f5a AV |
228 | config ARCH_MTD_XIP |
229 | bool | |
230 | ||
c760fc19 HC |
231 | config VECTORS_BASE |
232 | hex | |
6afd6fae | 233 | default 0xffff0000 if MMU || CPU_HIGH_VECTOR |
c760fc19 HC |
234 | default DRAM_BASE if REMAP_VECTORS_TO_RAM |
235 | default 0x00000000 | |
236 | help | |
19accfd3 RK |
237 | The base address of exception vectors. This must be two pages |
238 | in size. | |
c760fc19 | 239 | |
dc21af99 | 240 | config ARM_PATCH_PHYS_VIRT |
c1becedc RK |
241 | bool "Patch physical to virtual translations at runtime" if EMBEDDED |
242 | default y | |
b511d75d | 243 | depends on !XIP_KERNEL && MMU |
dc21af99 | 244 | help |
111e9a5c RK |
245 | Patch phys-to-virt and virt-to-phys translation functions at |
246 | boot and module load time according to the position of the | |
247 | kernel in system memory. | |
dc21af99 | 248 | |
111e9a5c | 249 | This can only be used with non-XIP MMU kernels where the base |
daece596 | 250 | of physical memory is at a 16MB boundary. |
dc21af99 | 251 | |
c1becedc RK |
252 | Only disable this option if you know that you do not require |
253 | this feature (eg, building a kernel for a single machine) and | |
254 | you need to shrink the kernel to the minimal size. | |
dc21af99 | 255 | |
c334bc15 RH |
256 | config NEED_MACH_IO_H |
257 | bool | |
258 | help | |
259 | Select this when mach/io.h is required to provide special | |
260 | definitions for this platform. The need for mach/io.h should | |
261 | be avoided when possible. | |
262 | ||
0cdc8b92 | 263 | config NEED_MACH_MEMORY_H |
1b9f95f8 NP |
264 | bool |
265 | help | |
0cdc8b92 NP |
266 | Select this when mach/memory.h is required to provide special |
267 | definitions for this platform. The need for mach/memory.h should | |
268 | be avoided when possible. | |
dc21af99 | 269 | |
1b9f95f8 | 270 | config PHYS_OFFSET |
974c0724 | 271 | hex "Physical address of main memory" if MMU |
c6f54a9b | 272 | depends on !ARM_PATCH_PHYS_VIRT |
974c0724 | 273 | default DRAM_BASE if !MMU |
c6f54a9b | 274 | default 0x00000000 if ARCH_EBSA110 || \ |
c6f54a9b UKK |
275 | ARCH_FOOTBRIDGE || \ |
276 | ARCH_INTEGRATOR || \ | |
277 | ARCH_IOP13XX || \ | |
278 | ARCH_KS8695 || \ | |
279 | (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET) | |
280 | default 0x10000000 if ARCH_OMAP1 || ARCH_RPC | |
281 | default 0x20000000 if ARCH_S5PV210 | |
282 | default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET | |
b8824c9a | 283 | default 0xc0000000 if ARCH_SA1100 |
111e9a5c | 284 | help |
1b9f95f8 NP |
285 | Please provide the physical address corresponding to the |
286 | location of main memory in your system. | |
cada3c08 | 287 | |
87e040b6 SG |
288 | config GENERIC_BUG |
289 | def_bool y | |
290 | depends on BUG | |
291 | ||
1bcad26e KS |
292 | config PGTABLE_LEVELS |
293 | int | |
294 | default 3 if ARM_LPAE | |
295 | default 2 | |
296 | ||
1da177e4 LT |
297 | source "init/Kconfig" |
298 | ||
dc52ddc0 MH |
299 | source "kernel/Kconfig.freezer" |
300 | ||
1da177e4 LT |
301 | menu "System Type" |
302 | ||
3c427975 HC |
303 | config MMU |
304 | bool "MMU-based Paged Memory Management Support" | |
305 | default y | |
306 | help | |
307 | Select if you want MMU-based virtualised addressing space | |
308 | support by paged memory management. If unsure, say 'Y'. | |
309 | ||
e0c25d95 DC |
310 | config ARCH_MMAP_RND_BITS_MIN |
311 | default 8 | |
312 | ||
313 | config ARCH_MMAP_RND_BITS_MAX | |
314 | default 14 if PAGE_OFFSET=0x40000000 | |
315 | default 15 if PAGE_OFFSET=0x80000000 | |
316 | default 16 | |
317 | ||
ccf50e23 RK |
318 | # |
319 | # The "ARM system type" choice list is ordered alphabetically by option | |
320 | # text. Please add new entries in the option alphabetic order. | |
321 | # | |
1da177e4 LT |
322 | choice |
323 | prompt "ARM system type" | |
70722803 | 324 | default ARM_SINGLE_ARMV7M if !MMU |
1420b22b | 325 | default ARCH_MULTIPLATFORM if MMU |
1da177e4 | 326 | |
387798b3 RH |
327 | config ARCH_MULTIPLATFORM |
328 | bool "Allow multiple platforms to be selected" | |
b1b3f49c | 329 | depends on MMU |
ddb902cc | 330 | select ARCH_WANT_OPTIONAL_GPIOLIB |
42dc836d | 331 | select ARM_HAS_SG_CHAIN |
387798b3 RH |
332 | select ARM_PATCH_PHYS_VIRT |
333 | select AUTO_ZRELADDR | |
6d0add40 | 334 | select CLKSRC_OF |
66314223 | 335 | select COMMON_CLK |
ddb902cc | 336 | select GENERIC_CLOCKEVENTS |
08d38beb | 337 | select MIGHT_HAVE_PCI |
387798b3 | 338 | select MULTI_IRQ_HANDLER |
66314223 DN |
339 | select SPARSE_IRQ |
340 | select USE_OF | |
66314223 | 341 | |
9c77bc43 SA |
342 | config ARM_SINGLE_ARMV7M |
343 | bool "ARMv7-M based platforms (Cortex-M0/M3/M4)" | |
344 | depends on !MMU | |
345 | select ARCH_WANT_OPTIONAL_GPIOLIB | |
346 | select ARM_NVIC | |
499f1640 | 347 | select AUTO_ZRELADDR |
9c77bc43 SA |
348 | select CLKSRC_OF |
349 | select COMMON_CLK | |
350 | select CPU_V7M | |
351 | select GENERIC_CLOCKEVENTS | |
352 | select NO_IOPORT_MAP | |
353 | select SPARSE_IRQ | |
354 | select USE_OF | |
355 | ||
4af6fee1 | 356 | |
93e22567 RK |
357 | config ARCH_CLPS711X |
358 | bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" | |
a3b8d4a5 | 359 | select ARCH_REQUIRE_GPIOLIB |
ea7d1bc9 | 360 | select AUTO_ZRELADDR |
c99f72ad | 361 | select CLKSRC_MMIO |
93e22567 RK |
362 | select COMMON_CLK |
363 | select CPU_ARM720T | |
4a8355c4 | 364 | select GENERIC_CLOCKEVENTS |
6597619f | 365 | select MFD_SYSCON |
e4e3a37d | 366 | select SOC_BUS |
93e22567 RK |
367 | help |
368 | Support for Cirrus Logic 711x/721x/731x based boards. | |
369 | ||
788c9700 RK |
370 | config ARCH_GEMINI |
371 | bool "Cortina Systems Gemini" | |
788c9700 | 372 | select ARCH_REQUIRE_GPIOLIB |
f3372c01 | 373 | select CLKSRC_MMIO |
b1b3f49c | 374 | select CPU_FA526 |
f3372c01 | 375 | select GENERIC_CLOCKEVENTS |
788c9700 RK |
376 | help |
377 | Support for the Cortina Systems Gemini family SoCs | |
378 | ||
1da177e4 LT |
379 | config ARCH_EBSA110 |
380 | bool "EBSA-110" | |
b1b3f49c | 381 | select ARCH_USES_GETTIMEOFFSET |
c750815e | 382 | select CPU_SA110 |
f7e68bbf | 383 | select ISA |
c334bc15 | 384 | select NEED_MACH_IO_H |
0cdc8b92 | 385 | select NEED_MACH_MEMORY_H |
ce816fa8 | 386 | select NO_IOPORT_MAP |
1da177e4 LT |
387 | help |
388 | This is an evaluation board for the StrongARM processor available | |
f6c8965a | 389 | from Digital. It has limited hardware on-board, including an |
1da177e4 LT |
390 | Ethernet interface, two PCMCIA sockets, two serial ports and a |
391 | parallel port. | |
392 | ||
e7736d47 LB |
393 | config ARCH_EP93XX |
394 | bool "EP93xx-based" | |
b1b3f49c RK |
395 | select ARCH_HAS_HOLES_MEMORYMODEL |
396 | select ARCH_REQUIRE_GPIOLIB | |
e7736d47 | 397 | select ARM_AMBA |
b8824c9a | 398 | select ARM_PATCH_PHYS_VIRT |
e7736d47 | 399 | select ARM_VIC |
b8824c9a | 400 | select AUTO_ZRELADDR |
6d803ba7 | 401 | select CLKDEV_LOOKUP |
000bc178 | 402 | select CLKSRC_MMIO |
b1b3f49c | 403 | select CPU_ARM920T |
000bc178 | 404 | select GENERIC_CLOCKEVENTS |
e7736d47 LB |
405 | help |
406 | This enables support for the Cirrus EP93xx series of CPUs. | |
407 | ||
1da177e4 LT |
408 | config ARCH_FOOTBRIDGE |
409 | bool "FootBridge" | |
c750815e | 410 | select CPU_SA110 |
1da177e4 | 411 | select FOOTBRIDGE |
4e8d7637 | 412 | select GENERIC_CLOCKEVENTS |
d0ee9f40 | 413 | select HAVE_IDE |
8ef6e620 | 414 | select NEED_MACH_IO_H if !MMU |
0cdc8b92 | 415 | select NEED_MACH_MEMORY_H |
f999b8bd MM |
416 | help |
417 | Support for systems based on the DC21285 companion chip | |
418 | ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. | |
1da177e4 | 419 | |
4af6fee1 DS |
420 | config ARCH_NETX |
421 | bool "Hilscher NetX based" | |
b1b3f49c | 422 | select ARM_VIC |
234b6ced | 423 | select CLKSRC_MMIO |
c750815e | 424 | select CPU_ARM926T |
2fcfe6b8 | 425 | select GENERIC_CLOCKEVENTS |
f999b8bd | 426 | help |
4af6fee1 DS |
427 | This enables support for systems based on the Hilscher NetX Soc |
428 | ||
3b938be6 RK |
429 | config ARCH_IOP13XX |
430 | bool "IOP13xx-based" | |
431 | depends on MMU | |
b1b3f49c | 432 | select CPU_XSC3 |
0cdc8b92 | 433 | select NEED_MACH_MEMORY_H |
13a5045d | 434 | select NEED_RET_TO_USER |
b1b3f49c RK |
435 | select PCI |
436 | select PLAT_IOP | |
437 | select VMSPLIT_1G | |
37ebbcff | 438 | select SPARSE_IRQ |
3b938be6 RK |
439 | help |
440 | Support for Intel's IOP13XX (XScale) family of processors. | |
441 | ||
3f7e5815 LB |
442 | config ARCH_IOP32X |
443 | bool "IOP32x-based" | |
a4f7e763 | 444 | depends on MMU |
b1b3f49c | 445 | select ARCH_REQUIRE_GPIOLIB |
c750815e | 446 | select CPU_XSCALE |
e9004f50 | 447 | select GPIO_IOP |
13a5045d | 448 | select NEED_RET_TO_USER |
f7e68bbf | 449 | select PCI |
b1b3f49c | 450 | select PLAT_IOP |
f999b8bd | 451 | help |
3f7e5815 LB |
452 | Support for Intel's 80219 and IOP32X (XScale) family of |
453 | processors. | |
454 | ||
455 | config ARCH_IOP33X | |
456 | bool "IOP33x-based" | |
457 | depends on MMU | |
b1b3f49c | 458 | select ARCH_REQUIRE_GPIOLIB |
c750815e | 459 | select CPU_XSCALE |
e9004f50 | 460 | select GPIO_IOP |
13a5045d | 461 | select NEED_RET_TO_USER |
3f7e5815 | 462 | select PCI |
b1b3f49c | 463 | select PLAT_IOP |
3f7e5815 LB |
464 | help |
465 | Support for Intel's IOP33X (XScale) family of processors. | |
1da177e4 | 466 | |
3b938be6 RK |
467 | config ARCH_IXP4XX |
468 | bool "IXP4xx-based" | |
a4f7e763 | 469 | depends on MMU |
58af4a24 | 470 | select ARCH_HAS_DMA_SET_COHERENT_MASK |
b1b3f49c | 471 | select ARCH_REQUIRE_GPIOLIB |
51aaf81f | 472 | select ARCH_SUPPORTS_BIG_ENDIAN |
234b6ced | 473 | select CLKSRC_MMIO |
c750815e | 474 | select CPU_XSCALE |
b1b3f49c | 475 | select DMABOUNCE if PCI |
3b938be6 | 476 | select GENERIC_CLOCKEVENTS |
0b05da72 | 477 | select MIGHT_HAVE_PCI |
c334bc15 | 478 | select NEED_MACH_IO_H |
9296d94d | 479 | select USB_EHCI_BIG_ENDIAN_DESC |
171b3f0d | 480 | select USB_EHCI_BIG_ENDIAN_MMIO |
c4713074 | 481 | help |
3b938be6 | 482 | Support for Intel's IXP4XX (XScale) family of processors. |
c4713074 | 483 | |
edabd38e SB |
484 | config ARCH_DOVE |
485 | bool "Marvell Dove" | |
edabd38e | 486 | select ARCH_REQUIRE_GPIOLIB |
756b2531 | 487 | select CPU_PJ4 |
edabd38e | 488 | select GENERIC_CLOCKEVENTS |
0f81bd43 | 489 | select MIGHT_HAVE_PCI |
b8cd337c | 490 | select MULTI_IRQ_HANDLER |
171b3f0d | 491 | select MVEBU_MBUS |
9139acd1 SH |
492 | select PINCTRL |
493 | select PINCTRL_DOVE | |
abcda1dc | 494 | select PLAT_ORION_LEGACY |
0bd86961 | 495 | select SPARSE_IRQ |
c5d431e8 | 496 | select PM_GENERIC_DOMAINS if PM |
788c9700 | 497 | help |
edabd38e | 498 | Support for the Marvell Dove SoC 88AP510 |
788c9700 RK |
499 | |
500 | config ARCH_KS8695 | |
501 | bool "Micrel/Kendin KS8695" | |
98830bc9 | 502 | select ARCH_REQUIRE_GPIOLIB |
c7e783d6 | 503 | select CLKSRC_MMIO |
b1b3f49c | 504 | select CPU_ARM922T |
c7e783d6 | 505 | select GENERIC_CLOCKEVENTS |
b1b3f49c | 506 | select NEED_MACH_MEMORY_H |
788c9700 RK |
507 | help |
508 | Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based | |
509 | System-on-Chip devices. | |
510 | ||
788c9700 RK |
511 | config ARCH_W90X900 |
512 | bool "Nuvoton W90X900 CPU" | |
c52d3d68 | 513 | select ARCH_REQUIRE_GPIOLIB |
6d803ba7 | 514 | select CLKDEV_LOOKUP |
6fa5d5f7 | 515 | select CLKSRC_MMIO |
b1b3f49c | 516 | select CPU_ARM926T |
58b5369e | 517 | select GENERIC_CLOCKEVENTS |
788c9700 | 518 | help |
a8bc4ead | 519 | Support for Nuvoton (Winbond logic dept.) ARM9 processor, |
520 | At present, the w90x900 has been renamed nuc900, regarding | |
521 | the ARM series product line, you can login the following | |
522 | link address to know more. | |
523 | ||
524 | <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/ | |
525 | ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller> | |
788c9700 | 526 | |
93e22567 RK |
527 | config ARCH_LPC32XX |
528 | bool "NXP LPC32XX" | |
529 | select ARCH_REQUIRE_GPIOLIB | |
530 | select ARM_AMBA | |
531 | select CLKDEV_LOOKUP | |
c227f127 VZ |
532 | select CLKSRC_LPC32XX |
533 | select COMMON_CLK | |
93e22567 RK |
534 | select CPU_ARM926T |
535 | select GENERIC_CLOCKEVENTS | |
8cb17b5e VZ |
536 | select MULTI_IRQ_HANDLER |
537 | select SPARSE_IRQ | |
93e22567 RK |
538 | select USE_OF |
539 | help | |
540 | Support for the NXP LPC32XX family of processors | |
541 | ||
1da177e4 | 542 | config ARCH_PXA |
2c8086a5 | 543 | bool "PXA2xx/PXA3xx-based" |
a4f7e763 | 544 | depends on MMU |
b1b3f49c RK |
545 | select ARCH_MTD_XIP |
546 | select ARCH_REQUIRE_GPIOLIB | |
547 | select ARM_CPU_SUSPEND if PM | |
548 | select AUTO_ZRELADDR | |
a1c0a6ad | 549 | select COMMON_CLK |
6d803ba7 | 550 | select CLKDEV_LOOKUP |
389d9b58 | 551 | select CLKSRC_PXA |
234b6ced | 552 | select CLKSRC_MMIO |
6f6caeaa | 553 | select CLKSRC_OF |
2f202861 | 554 | select CPU_XSCALE if !CPU_XSC3 |
981d0f39 | 555 | select GENERIC_CLOCKEVENTS |
157d2644 | 556 | select GPIO_PXA |
d0ee9f40 | 557 | select HAVE_IDE |
d6cf30ca | 558 | select IRQ_DOMAIN |
b1b3f49c | 559 | select MULTI_IRQ_HANDLER |
b1b3f49c RK |
560 | select PLAT_PXA |
561 | select SPARSE_IRQ | |
f999b8bd | 562 | help |
2c8086a5 | 563 | Support for Intel/Marvell's PXA2xx/PXA3xx processor line. |
1da177e4 LT |
564 | |
565 | config ARCH_RPC | |
566 | bool "RiscPC" | |
868e87cc | 567 | depends on MMU |
1da177e4 | 568 | select ARCH_ACORN |
a08b6b79 | 569 | select ARCH_MAY_HAVE_PC_FDC |
07f841b7 | 570 | select ARCH_SPARSEMEM_ENABLE |
5cfc8ee0 | 571 | select ARCH_USES_GETTIMEOFFSET |
fa04e209 | 572 | select CPU_SA110 |
b1b3f49c | 573 | select FIQ |
d0ee9f40 | 574 | select HAVE_IDE |
b1b3f49c RK |
575 | select HAVE_PATA_PLATFORM |
576 | select ISA_DMA_API | |
c334bc15 | 577 | select NEED_MACH_IO_H |
0cdc8b92 | 578 | select NEED_MACH_MEMORY_H |
ce816fa8 | 579 | select NO_IOPORT_MAP |
1da177e4 LT |
580 | help |
581 | On the Acorn Risc-PC, Linux can support the internal IDE disk and | |
582 | CD-ROM interface, serial and parallel port, and the floppy drive. | |
583 | ||
584 | config ARCH_SA1100 | |
585 | bool "SA1100-based" | |
b1b3f49c RK |
586 | select ARCH_MTD_XIP |
587 | select ARCH_REQUIRE_GPIOLIB | |
588 | select ARCH_SPARSEMEM_ENABLE | |
589 | select CLKDEV_LOOKUP | |
590 | select CLKSRC_MMIO | |
389d9b58 DL |
591 | select CLKSRC_PXA |
592 | select CLKSRC_OF if OF | |
1937f5b9 | 593 | select CPU_FREQ |
b1b3f49c | 594 | select CPU_SA1100 |
3e238be2 | 595 | select GENERIC_CLOCKEVENTS |
d0ee9f40 | 596 | select HAVE_IDE |
1eca42b4 | 597 | select IRQ_DOMAIN |
b1b3f49c | 598 | select ISA |
affcab32 | 599 | select MULTI_IRQ_HANDLER |
0cdc8b92 | 600 | select NEED_MACH_MEMORY_H |
375dec92 | 601 | select SPARSE_IRQ |
f999b8bd MM |
602 | help |
603 | Support for StrongARM 11x0 based boards. | |
1da177e4 | 604 | |
b130d5c2 KK |
605 | config ARCH_S3C24XX |
606 | bool "Samsung S3C24XX SoCs" | |
53650430 | 607 | select ARCH_REQUIRE_GPIOLIB |
335cce74 | 608 | select ATAGS |
b1b3f49c | 609 | select CLKDEV_LOOKUP |
4280506a | 610 | select CLKSRC_SAMSUNG_PWM |
7f78b6eb | 611 | select GENERIC_CLOCKEVENTS |
880cf071 | 612 | select GPIO_SAMSUNG |
20676c15 | 613 | select HAVE_S3C2410_I2C if I2C |
b130d5c2 | 614 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
b1b3f49c | 615 | select HAVE_S3C_RTC if RTC_CLASS |
17453dd2 | 616 | select MULTI_IRQ_HANDLER |
c334bc15 | 617 | select NEED_MACH_IO_H |
cd8dc7ae | 618 | select SAMSUNG_ATAGS |
1da177e4 | 619 | help |
b130d5c2 KK |
620 | Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 |
621 | and S3C2450 SoCs based systems, such as the Simtec Electronics BAST | |
622 | (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the | |
623 | Samsung SMDK2410 development board (and derivatives). | |
63b1f51b | 624 | |
7c6337e2 KH |
625 | config ARCH_DAVINCI |
626 | bool "TI DaVinci" | |
b1b3f49c | 627 | select ARCH_HAS_HOLES_MEMORYMODEL |
dce1115b | 628 | select ARCH_REQUIRE_GPIOLIB |
6d803ba7 | 629 | select CLKDEV_LOOKUP |
ce32c5c5 | 630 | select CPU_ARM926T |
20e9969b | 631 | select GENERIC_ALLOCATOR |
b1b3f49c | 632 | select GENERIC_CLOCKEVENTS |
dc7ad3b3 | 633 | select GENERIC_IRQ_CHIP |
b1b3f49c | 634 | select HAVE_IDE |
689e331f | 635 | select USE_OF |
b1b3f49c | 636 | select ZONE_DMA |
7c6337e2 KH |
637 | help |
638 | Support for TI's DaVinci platform. | |
639 | ||
a0694861 TL |
640 | config ARCH_OMAP1 |
641 | bool "TI OMAP1" | |
00a36698 | 642 | depends on MMU |
9af915da | 643 | select ARCH_HAS_HOLES_MEMORYMODEL |
a0694861 | 644 | select ARCH_OMAP |
21f47fbc | 645 | select ARCH_REQUIRE_GPIOLIB |
b1b3f49c | 646 | select CLKDEV_LOOKUP |
d6e15d78 | 647 | select CLKSRC_MMIO |
b1b3f49c | 648 | select GENERIC_CLOCKEVENTS |
a0694861 | 649 | select GENERIC_IRQ_CHIP |
a0694861 TL |
650 | select HAVE_IDE |
651 | select IRQ_DOMAIN | |
b694331c | 652 | select MULTI_IRQ_HANDLER |
a0694861 TL |
653 | select NEED_MACH_IO_H if PCCARD |
654 | select NEED_MACH_MEMORY_H | |
685e2d08 | 655 | select SPARSE_IRQ |
21f47fbc | 656 | help |
a0694861 | 657 | Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) |
02c981c0 | 658 | |
1da177e4 LT |
659 | endchoice |
660 | ||
387798b3 RH |
661 | menu "Multiple platform selection" |
662 | depends on ARCH_MULTIPLATFORM | |
663 | ||
664 | comment "CPU Core family selection" | |
665 | ||
f8afae40 AB |
666 | config ARCH_MULTI_V4 |
667 | bool "ARMv4 based platforms (FA526)" | |
668 | depends on !ARCH_MULTI_V6_V7 | |
669 | select ARCH_MULTI_V4_V5 | |
670 | select CPU_FA526 | |
671 | ||
387798b3 RH |
672 | config ARCH_MULTI_V4T |
673 | bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" | |
387798b3 | 674 | depends on !ARCH_MULTI_V6_V7 |
b1b3f49c | 675 | select ARCH_MULTI_V4_V5 |
24e860fb AB |
676 | select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \ |
677 | CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \ | |
678 | CPU_ARM925T || CPU_ARM940T) | |
387798b3 RH |
679 | |
680 | config ARCH_MULTI_V5 | |
681 | bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" | |
387798b3 | 682 | depends on !ARCH_MULTI_V6_V7 |
b1b3f49c | 683 | select ARCH_MULTI_V4_V5 |
12567bbd | 684 | select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \ |
24e860fb AB |
685 | CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \ |
686 | CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON) | |
387798b3 RH |
687 | |
688 | config ARCH_MULTI_V4_V5 | |
689 | bool | |
690 | ||
691 | config ARCH_MULTI_V6 | |
8dda05cc | 692 | bool "ARMv6 based platforms (ARM11)" |
387798b3 | 693 | select ARCH_MULTI_V6_V7 |
42f4754a | 694 | select CPU_V6K |
387798b3 RH |
695 | |
696 | config ARCH_MULTI_V7 | |
8dda05cc | 697 | bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" |
387798b3 RH |
698 | default y |
699 | select ARCH_MULTI_V6_V7 | |
b1b3f49c | 700 | select CPU_V7 |
90bc8ac7 | 701 | select HAVE_SMP |
387798b3 RH |
702 | |
703 | config ARCH_MULTI_V6_V7 | |
704 | bool | |
9352b05b | 705 | select MIGHT_HAVE_CACHE_L2X0 |
387798b3 RH |
706 | |
707 | config ARCH_MULTI_CPU_AUTO | |
708 | def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) | |
709 | select ARCH_MULTI_V5 | |
710 | ||
711 | endmenu | |
712 | ||
05e2a3de | 713 | config ARCH_VIRT |
e3246542 MY |
714 | bool "Dummy Virtual Machine" |
715 | depends on ARCH_MULTI_V7 | |
4b8b5f25 | 716 | select ARM_AMBA |
05e2a3de | 717 | select ARM_GIC |
0e2f91e9 | 718 | select ARM_GIC_V2M if PCI_MSI |
0b28f1db | 719 | select ARM_GIC_V3 |
05e2a3de | 720 | select ARM_PSCI |
4b8b5f25 | 721 | select HAVE_ARM_ARCH_TIMER |
05e2a3de | 722 | |
ccf50e23 RK |
723 | # |
724 | # This is sorted alphabetically by mach-* pathname. However, plat-* | |
725 | # Kconfigs may be included either alphabetically (according to the | |
726 | # plat- suffix) or along side the corresponding mach-* source. | |
727 | # | |
3e93a22b GC |
728 | source "arch/arm/mach-mvebu/Kconfig" |
729 | ||
445d9b30 TZ |
730 | source "arch/arm/mach-alpine/Kconfig" |
731 | ||
590b460c LP |
732 | source "arch/arm/mach-artpec/Kconfig" |
733 | ||
d9bfc86d OR |
734 | source "arch/arm/mach-asm9260/Kconfig" |
735 | ||
95b8f20f RK |
736 | source "arch/arm/mach-at91/Kconfig" |
737 | ||
1d22924e AB |
738 | source "arch/arm/mach-axxia/Kconfig" |
739 | ||
8ac49e04 CD |
740 | source "arch/arm/mach-bcm/Kconfig" |
741 | ||
1c37fa10 SH |
742 | source "arch/arm/mach-berlin/Kconfig" |
743 | ||
1da177e4 LT |
744 | source "arch/arm/mach-clps711x/Kconfig" |
745 | ||
d94f944e AV |
746 | source "arch/arm/mach-cns3xxx/Kconfig" |
747 | ||
95b8f20f RK |
748 | source "arch/arm/mach-davinci/Kconfig" |
749 | ||
df8d742e BS |
750 | source "arch/arm/mach-digicolor/Kconfig" |
751 | ||
95b8f20f RK |
752 | source "arch/arm/mach-dove/Kconfig" |
753 | ||
e7736d47 LB |
754 | source "arch/arm/mach-ep93xx/Kconfig" |
755 | ||
1da177e4 LT |
756 | source "arch/arm/mach-footbridge/Kconfig" |
757 | ||
59d3a193 PZ |
758 | source "arch/arm/mach-gemini/Kconfig" |
759 | ||
387798b3 RH |
760 | source "arch/arm/mach-highbank/Kconfig" |
761 | ||
389ee0c2 HZ |
762 | source "arch/arm/mach-hisi/Kconfig" |
763 | ||
1da177e4 LT |
764 | source "arch/arm/mach-integrator/Kconfig" |
765 | ||
3f7e5815 LB |
766 | source "arch/arm/mach-iop32x/Kconfig" |
767 | ||
768 | source "arch/arm/mach-iop33x/Kconfig" | |
1da177e4 | 769 | |
285f5fa7 DW |
770 | source "arch/arm/mach-iop13xx/Kconfig" |
771 | ||
1da177e4 LT |
772 | source "arch/arm/mach-ixp4xx/Kconfig" |
773 | ||
828989ad SS |
774 | source "arch/arm/mach-keystone/Kconfig" |
775 | ||
95b8f20f RK |
776 | source "arch/arm/mach-ks8695/Kconfig" |
777 | ||
3b8f5030 CC |
778 | source "arch/arm/mach-meson/Kconfig" |
779 | ||
17723fd3 JJ |
780 | source "arch/arm/mach-moxart/Kconfig" |
781 | ||
8c2ed9bc JS |
782 | source "arch/arm/mach-aspeed/Kconfig" |
783 | ||
794d15b2 SS |
784 | source "arch/arm/mach-mv78xx0/Kconfig" |
785 | ||
3995eb82 | 786 | source "arch/arm/mach-imx/Kconfig" |
1da177e4 | 787 | |
f682a218 MB |
788 | source "arch/arm/mach-mediatek/Kconfig" |
789 | ||
1d3f33d5 SG |
790 | source "arch/arm/mach-mxs/Kconfig" |
791 | ||
95b8f20f | 792 | source "arch/arm/mach-netx/Kconfig" |
49cbe786 | 793 | |
95b8f20f | 794 | source "arch/arm/mach-nomadik/Kconfig" |
95b8f20f | 795 | |
9851ca57 DT |
796 | source "arch/arm/mach-nspire/Kconfig" |
797 | ||
d48af15e TL |
798 | source "arch/arm/plat-omap/Kconfig" |
799 | ||
800 | source "arch/arm/mach-omap1/Kconfig" | |
1da177e4 | 801 | |
1dbae815 TL |
802 | source "arch/arm/mach-omap2/Kconfig" |
803 | ||
9dd0b194 | 804 | source "arch/arm/mach-orion5x/Kconfig" |
585cf175 | 805 | |
387798b3 RH |
806 | source "arch/arm/mach-picoxcell/Kconfig" |
807 | ||
95b8f20f RK |
808 | source "arch/arm/mach-pxa/Kconfig" |
809 | source "arch/arm/plat-pxa/Kconfig" | |
585cf175 | 810 | |
95b8f20f RK |
811 | source "arch/arm/mach-mmp/Kconfig" |
812 | ||
8c9184b7 NA |
813 | source "arch/arm/mach-oxnas/Kconfig" |
814 | ||
8fc1b0f8 KG |
815 | source "arch/arm/mach-qcom/Kconfig" |
816 | ||
95b8f20f RK |
817 | source "arch/arm/mach-realview/Kconfig" |
818 | ||
d63dc051 HS |
819 | source "arch/arm/mach-rockchip/Kconfig" |
820 | ||
95b8f20f | 821 | source "arch/arm/mach-sa1100/Kconfig" |
edabd38e | 822 | |
387798b3 RH |
823 | source "arch/arm/mach-socfpga/Kconfig" |
824 | ||
a7ed099f | 825 | source "arch/arm/mach-spear/Kconfig" |
a21765a7 | 826 | |
65ebcc11 SK |
827 | source "arch/arm/mach-sti/Kconfig" |
828 | ||
85fd6d63 | 829 | source "arch/arm/mach-s3c24xx/Kconfig" |
1da177e4 | 830 | |
431107ea | 831 | source "arch/arm/mach-s3c64xx/Kconfig" |
a08ab637 | 832 | |
170f4e42 KK |
833 | source "arch/arm/mach-s5pv210/Kconfig" |
834 | ||
83014579 | 835 | source "arch/arm/mach-exynos/Kconfig" |
e509b289 | 836 | source "arch/arm/plat-samsung/Kconfig" |
cc0e72b8 | 837 | |
882d01f9 | 838 | source "arch/arm/mach-shmobile/Kconfig" |
52c543f9 | 839 | |
3b52634f MR |
840 | source "arch/arm/mach-sunxi/Kconfig" |
841 | ||
156a0997 BS |
842 | source "arch/arm/mach-prima2/Kconfig" |
843 | ||
d6de5b02 MG |
844 | source "arch/arm/mach-tango/Kconfig" |
845 | ||
c5f80065 EG |
846 | source "arch/arm/mach-tegra/Kconfig" |
847 | ||
95b8f20f | 848 | source "arch/arm/mach-u300/Kconfig" |
1da177e4 | 849 | |
ba56a987 MY |
850 | source "arch/arm/mach-uniphier/Kconfig" |
851 | ||
95b8f20f | 852 | source "arch/arm/mach-ux500/Kconfig" |
1da177e4 LT |
853 | |
854 | source "arch/arm/mach-versatile/Kconfig" | |
855 | ||
ceade897 | 856 | source "arch/arm/mach-vexpress/Kconfig" |
420c34e4 | 857 | source "arch/arm/plat-versatile/Kconfig" |
ceade897 | 858 | |
6f35f9a9 TP |
859 | source "arch/arm/mach-vt8500/Kconfig" |
860 | ||
7ec80ddf | 861 | source "arch/arm/mach-w90x900/Kconfig" |
862 | ||
acede515 JN |
863 | source "arch/arm/mach-zx/Kconfig" |
864 | ||
9a45eb69 JC |
865 | source "arch/arm/mach-zynq/Kconfig" |
866 | ||
499f1640 SA |
867 | # ARMv7-M architecture |
868 | config ARCH_EFM32 | |
869 | bool "Energy Micro efm32" | |
870 | depends on ARM_SINGLE_ARMV7M | |
871 | select ARCH_REQUIRE_GPIOLIB | |
872 | help | |
873 | Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko | |
874 | processors. | |
875 | ||
876 | config ARCH_LPC18XX | |
877 | bool "NXP LPC18xx/LPC43xx" | |
878 | depends on ARM_SINGLE_ARMV7M | |
879 | select ARCH_HAS_RESET_CONTROLLER | |
880 | select ARM_AMBA | |
881 | select CLKSRC_LPC32XX | |
882 | select PINCTRL | |
883 | help | |
884 | Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4 | |
885 | high performance microcontrollers. | |
886 | ||
887 | config ARCH_STM32 | |
888 | bool "STMicrolectronics STM32" | |
889 | depends on ARM_SINGLE_ARMV7M | |
890 | select ARCH_HAS_RESET_CONTROLLER | |
891 | select ARMV7M_SYSTICK | |
25263186 | 892 | select CLKSRC_STM32 |
f64e9804 | 893 | select PINCTRL |
499f1640 SA |
894 | select RESET_CONTROLLER |
895 | help | |
896 | Support for STMicroelectronics STM32 processors. | |
897 | ||
fa65fc6b MC |
898 | config MACH_STM32F429 |
899 | bool "STMicrolectronics STM32F429" | |
900 | depends on ARCH_STM32 | |
901 | default y | |
902 | ||
1847119d VM |
903 | config ARCH_MPS2 |
904 | bool "ARM MPS2 paltform" | |
905 | depends on ARM_SINGLE_ARMV7M | |
906 | select ARM_AMBA | |
907 | select CLKSRC_MPS2 | |
908 | help | |
909 | Support for Cortex-M Prototyping System (or V2M-MPS2) which comes | |
910 | with a range of available cores like Cortex-M3/M4/M7. | |
911 | ||
912 | Please, note that depends which Application Note is used memory map | |
913 | for the platform may vary, so adjustment of RAM base might be needed. | |
914 | ||
1da177e4 LT |
915 | # Definitions to make life easier |
916 | config ARCH_ACORN | |
917 | bool | |
918 | ||
7ae1f7ec LB |
919 | config PLAT_IOP |
920 | bool | |
469d3044 | 921 | select GENERIC_CLOCKEVENTS |
7ae1f7ec | 922 | |
69b02f6a LB |
923 | config PLAT_ORION |
924 | bool | |
bfe45e0b | 925 | select CLKSRC_MMIO |
b1b3f49c | 926 | select COMMON_CLK |
dc7ad3b3 | 927 | select GENERIC_IRQ_CHIP |
278b45b0 | 928 | select IRQ_DOMAIN |
69b02f6a | 929 | |
abcda1dc TP |
930 | config PLAT_ORION_LEGACY |
931 | bool | |
932 | select PLAT_ORION | |
933 | ||
bd5ce433 EM |
934 | config PLAT_PXA |
935 | bool | |
936 | ||
f4b8b319 RK |
937 | config PLAT_VERSATILE |
938 | bool | |
939 | ||
d9a1beaa AC |
940 | source "arch/arm/firmware/Kconfig" |
941 | ||
1da177e4 LT |
942 | source arch/arm/mm/Kconfig |
943 | ||
afe4b25e | 944 | config IWMMXT |
d93003e8 SH |
945 | bool "Enable iWMMXt support" |
946 | depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B | |
947 | default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B | |
afe4b25e LB |
948 | help |
949 | Enable support for iWMMXt context switching at run time if | |
950 | running on a CPU that supports it. | |
951 | ||
52108641 | 952 | config MULTI_IRQ_HANDLER |
953 | bool | |
954 | help | |
955 | Allow each machine to specify it's own IRQ handler at run time. | |
956 | ||
3b93e7b0 HC |
957 | if !MMU |
958 | source "arch/arm/Kconfig-nommu" | |
959 | endif | |
960 | ||
3e0a07f8 GC |
961 | config PJ4B_ERRATA_4742 |
962 | bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation" | |
963 | depends on CPU_PJ4B && MACH_ARMADA_370 | |
964 | default y | |
965 | help | |
966 | When coming out of either a Wait for Interrupt (WFI) or a Wait for | |
967 | Event (WFE) IDLE states, a specific timing sensitivity exists between | |
968 | the retiring WFI/WFE instructions and the newly issued subsequent | |
969 | instructions. This sensitivity can result in a CPU hang scenario. | |
970 | Workaround: | |
971 | The software must insert either a Data Synchronization Barrier (DSB) | |
972 | or Data Memory Barrier (DMB) command immediately after the WFI/WFE | |
973 | instruction | |
974 | ||
f0c4b8d6 WD |
975 | config ARM_ERRATA_326103 |
976 | bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" | |
977 | depends on CPU_V6 | |
978 | help | |
979 | Executing a SWP instruction to read-only memory does not set bit 11 | |
980 | of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to | |
981 | treat the access as a read, preventing a COW from occurring and | |
982 | causing the faulting task to livelock. | |
983 | ||
9cba3ccc CM |
984 | config ARM_ERRATA_411920 |
985 | bool "ARM errata: Invalidation of the Instruction Cache operation can fail" | |
e399b1a4 | 986 | depends on CPU_V6 || CPU_V6K |
9cba3ccc CM |
987 | help |
988 | Invalidation of the Instruction Cache operation can | |
989 | fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. | |
990 | It does not affect the MPCore. This option enables the ARM Ltd. | |
991 | recommended workaround. | |
992 | ||
7ce236fc CM |
993 | config ARM_ERRATA_430973 |
994 | bool "ARM errata: Stale prediction on replaced interworking branch" | |
995 | depends on CPU_V7 | |
996 | help | |
997 | This option enables the workaround for the 430973 Cortex-A8 | |
79403cda | 998 | r1p* erratum. If a code sequence containing an ARM/Thumb |
7ce236fc CM |
999 | interworking branch is replaced with another code sequence at the |
1000 | same virtual address, whether due to self-modifying code or virtual | |
1001 | to physical address re-mapping, Cortex-A8 does not recover from the | |
1002 | stale interworking branch prediction. This results in Cortex-A8 | |
1003 | executing the new code sequence in the incorrect ARM or Thumb state. | |
1004 | The workaround enables the BTB/BTAC operations by setting ACTLR.IBE | |
1005 | and also flushes the branch target cache at every context switch. | |
1006 | Note that setting specific bits in the ACTLR register may not be | |
1007 | available in non-secure mode. | |
1008 | ||
855c551f CM |
1009 | config ARM_ERRATA_458693 |
1010 | bool "ARM errata: Processor deadlock when a false hazard is created" | |
1011 | depends on CPU_V7 | |
62e4d357 | 1012 | depends on !ARCH_MULTIPLATFORM |
855c551f CM |
1013 | help |
1014 | This option enables the workaround for the 458693 Cortex-A8 (r2p0) | |
1015 | erratum. For very specific sequences of memory operations, it is | |
1016 | possible for a hazard condition intended for a cache line to instead | |
1017 | be incorrectly associated with a different cache line. This false | |
1018 | hazard might then cause a processor deadlock. The workaround enables | |
1019 | the L1 caching of the NEON accesses and disables the PLD instruction | |
1020 | in the ACTLR register. Note that setting specific bits in the ACTLR | |
1021 | register may not be available in non-secure mode. | |
1022 | ||
0516e464 CM |
1023 | config ARM_ERRATA_460075 |
1024 | bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" | |
1025 | depends on CPU_V7 | |
62e4d357 | 1026 | depends on !ARCH_MULTIPLATFORM |
0516e464 CM |
1027 | help |
1028 | This option enables the workaround for the 460075 Cortex-A8 (r2p0) | |
1029 | erratum. Any asynchronous access to the L2 cache may encounter a | |
1030 | situation in which recent store transactions to the L2 cache are lost | |
1031 | and overwritten with stale memory contents from external memory. The | |
1032 | workaround disables the write-allocate mode for the L2 cache via the | |
1033 | ACTLR register. Note that setting specific bits in the ACTLR register | |
1034 | may not be available in non-secure mode. | |
1035 | ||
9f05027c WD |
1036 | config ARM_ERRATA_742230 |
1037 | bool "ARM errata: DMB operation may be faulty" | |
1038 | depends on CPU_V7 && SMP | |
62e4d357 | 1039 | depends on !ARCH_MULTIPLATFORM |
9f05027c WD |
1040 | help |
1041 | This option enables the workaround for the 742230 Cortex-A9 | |
1042 | (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction | |
1043 | between two write operations may not ensure the correct visibility | |
1044 | ordering of the two writes. This workaround sets a specific bit in | |
1045 | the diagnostic register of the Cortex-A9 which causes the DMB | |
1046 | instruction to behave as a DSB, ensuring the correct behaviour of | |
1047 | the two writes. | |
1048 | ||
a672e99b WD |
1049 | config ARM_ERRATA_742231 |
1050 | bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption" | |
1051 | depends on CPU_V7 && SMP | |
62e4d357 | 1052 | depends on !ARCH_MULTIPLATFORM |
a672e99b WD |
1053 | help |
1054 | This option enables the workaround for the 742231 Cortex-A9 | |
1055 | (r2p0..r2p2) erratum. Under certain conditions, specific to the | |
1056 | Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode, | |
1057 | accessing some data located in the same cache line, may get corrupted | |
1058 | data due to bad handling of the address hazard when the line gets | |
1059 | replaced from one of the CPUs at the same time as another CPU is | |
1060 | accessing it. This workaround sets specific bits in the diagnostic | |
1061 | register of the Cortex-A9 which reduces the linefill issuing | |
1062 | capabilities of the processor. | |
1063 | ||
69155794 JM |
1064 | config ARM_ERRATA_643719 |
1065 | bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" | |
1066 | depends on CPU_V7 && SMP | |
e5a5de44 | 1067 | default y |
69155794 JM |
1068 | help |
1069 | This option enables the workaround for the 643719 Cortex-A9 (prior to | |
1070 | r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR | |
1071 | register returns zero when it should return one. The workaround | |
1072 | corrects this value, ensuring cache maintenance operations which use | |
1073 | it behave as intended and avoiding data corruption. | |
1074 | ||
cdf357f1 WD |
1075 | config ARM_ERRATA_720789 |
1076 | bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" | |
e66dc745 | 1077 | depends on CPU_V7 |
cdf357f1 WD |
1078 | help |
1079 | This option enables the workaround for the 720789 Cortex-A9 (prior to | |
1080 | r2p0) erratum. A faulty ASID can be sent to the other CPUs for the | |
1081 | broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS. | |
1082 | As a consequence of this erratum, some TLB entries which should be | |
1083 | invalidated are not, resulting in an incoherency in the system page | |
1084 | tables. The workaround changes the TLB flushing routines to invalidate | |
1085 | entries regardless of the ASID. | |
475d92fc WD |
1086 | |
1087 | config ARM_ERRATA_743622 | |
1088 | bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" | |
1089 | depends on CPU_V7 | |
62e4d357 | 1090 | depends on !ARCH_MULTIPLATFORM |
475d92fc WD |
1091 | help |
1092 | This option enables the workaround for the 743622 Cortex-A9 | |
efbc74ac | 1093 | (r2p*) erratum. Under very rare conditions, a faulty |
475d92fc WD |
1094 | optimisation in the Cortex-A9 Store Buffer may lead to data |
1095 | corruption. This workaround sets a specific bit in the diagnostic | |
1096 | register of the Cortex-A9 which disables the Store Buffer | |
1097 | optimisation, preventing the defect from occurring. This has no | |
1098 | visible impact on the overall performance or power consumption of the | |
1099 | processor. | |
1100 | ||
9a27c27c WD |
1101 | config ARM_ERRATA_751472 |
1102 | bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" | |
ba90c516 | 1103 | depends on CPU_V7 |
62e4d357 | 1104 | depends on !ARCH_MULTIPLATFORM |
9a27c27c WD |
1105 | help |
1106 | This option enables the workaround for the 751472 Cortex-A9 (prior | |
1107 | to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the | |
1108 | completion of a following broadcasted operation if the second | |
1109 | operation is received by a CPU before the ICIALLUIS has completed, | |
1110 | potentially leading to corrupted entries in the cache or TLB. | |
1111 | ||
fcbdc5fe WD |
1112 | config ARM_ERRATA_754322 |
1113 | bool "ARM errata: possible faulty MMU translations following an ASID switch" | |
1114 | depends on CPU_V7 | |
1115 | help | |
1116 | This option enables the workaround for the 754322 Cortex-A9 (r2p*, | |
1117 | r3p*) erratum. A speculative memory access may cause a page table walk | |
1118 | which starts prior to an ASID switch but completes afterwards. This | |
1119 | can populate the micro-TLB with a stale entry which may be hit with | |
1120 | the new ASID. This workaround places two dsb instructions in the mm | |
1121 | switching code so that no page table walks can cross the ASID switch. | |
1122 | ||
5dab26af WD |
1123 | config ARM_ERRATA_754327 |
1124 | bool "ARM errata: no automatic Store Buffer drain" | |
1125 | depends on CPU_V7 && SMP | |
1126 | help | |
1127 | This option enables the workaround for the 754327 Cortex-A9 (prior to | |
1128 | r2p0) erratum. The Store Buffer does not have any automatic draining | |
1129 | mechanism and therefore a livelock may occur if an external agent | |
1130 | continuously polls a memory location waiting to observe an update. | |
1131 | This workaround defines cpu_relax() as smp_mb(), preventing correctly | |
1132 | written polling loops from denying visibility of updates to memory. | |
1133 | ||
145e10e1 CM |
1134 | config ARM_ERRATA_364296 |
1135 | bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" | |
fd832478 | 1136 | depends on CPU_V6 |
145e10e1 CM |
1137 | help |
1138 | This options enables the workaround for the 364296 ARM1136 | |
1139 | r0p2 erratum (possible cache data corruption with | |
1140 | hit-under-miss enabled). It sets the undocumented bit 31 in | |
1141 | the auxiliary control register and the FI bit in the control | |
1142 | register, thus disabling hit-under-miss without putting the | |
1143 | processor into full low interrupt latency mode. ARM11MPCore | |
1144 | is not affected. | |
1145 | ||
f630c1bd WD |
1146 | config ARM_ERRATA_764369 |
1147 | bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" | |
1148 | depends on CPU_V7 && SMP | |
1149 | help | |
1150 | This option enables the workaround for erratum 764369 | |
1151 | affecting Cortex-A9 MPCore with two or more processors (all | |
1152 | current revisions). Under certain timing circumstances, a data | |
1153 | cache line maintenance operation by MVA targeting an Inner | |
1154 | Shareable memory region may fail to proceed up to either the | |
1155 | Point of Coherency or to the Point of Unification of the | |
1156 | system. This workaround adds a DSB instruction before the | |
1157 | relevant cache maintenance functions and sets a specific bit | |
1158 | in the diagnostic control register of the SCU. | |
1159 | ||
7253b85c SH |
1160 | config ARM_ERRATA_775420 |
1161 | bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" | |
1162 | depends on CPU_V7 | |
1163 | help | |
1164 | This option enables the workaround for the 775420 Cortex-A9 (r2p2, | |
1165 | r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance | |
1166 | operation aborts with MMU exception, it might cause the processor | |
1167 | to deadlock. This workaround puts DSB before executing ISB if | |
1168 | an abort may occur on cache maintenance. | |
1169 | ||
93dc6887 CM |
1170 | config ARM_ERRATA_798181 |
1171 | bool "ARM errata: TLBI/DSB failure on Cortex-A15" | |
1172 | depends on CPU_V7 && SMP | |
1173 | help | |
1174 | On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not | |
1175 | adequately shooting down all use of the old entries. This | |
1176 | option enables the Linux kernel workaround for this erratum | |
1177 | which sends an IPI to the CPUs that are running the same ASID | |
1178 | as the one being invalidated. | |
1179 | ||
84b6504f WD |
1180 | config ARM_ERRATA_773022 |
1181 | bool "ARM errata: incorrect instructions may be executed from loop buffer" | |
1182 | depends on CPU_V7 | |
1183 | help | |
1184 | This option enables the workaround for the 773022 Cortex-A15 | |
1185 | (up to r0p4) erratum. In certain rare sequences of code, the | |
1186 | loop buffer may deliver incorrect instructions. This | |
1187 | workaround disables the loop buffer to avoid the erratum. | |
1188 | ||
1da177e4 LT |
1189 | endmenu |
1190 | ||
1191 | source "arch/arm/common/Kconfig" | |
1192 | ||
1da177e4 LT |
1193 | menu "Bus support" |
1194 | ||
1da177e4 LT |
1195 | config ISA |
1196 | bool | |
1da177e4 LT |
1197 | help |
1198 | Find out whether you have ISA slots on your motherboard. ISA is the | |
1199 | name of a bus system, i.e. the way the CPU talks to the other stuff | |
1200 | inside your box. Other bus systems are PCI, EISA, MicroChannel | |
1201 | (MCA) or VESA. ISA is an older system, now being displaced by PCI; | |
1202 | newer boards don't support it. If you have ISA, say Y, otherwise N. | |
1203 | ||
065909b9 | 1204 | # Select ISA DMA controller support |
1da177e4 LT |
1205 | config ISA_DMA |
1206 | bool | |
065909b9 | 1207 | select ISA_DMA_API |
1da177e4 | 1208 | |
065909b9 | 1209 | # Select ISA DMA interface |
5cae841b AV |
1210 | config ISA_DMA_API |
1211 | bool | |
5cae841b | 1212 | |
1da177e4 | 1213 | config PCI |
0b05da72 | 1214 | bool "PCI support" if MIGHT_HAVE_PCI |
1da177e4 LT |
1215 | help |
1216 | Find out whether you have a PCI motherboard. PCI is the name of a | |
1217 | bus system, i.e. the way the CPU talks to the other stuff inside | |
1218 | your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or | |
1219 | VESA. If you have PCI, say Y, otherwise N. | |
1220 | ||
52882173 AV |
1221 | config PCI_DOMAINS |
1222 | bool | |
1223 | depends on PCI | |
1224 | ||
8c7d1474 LP |
1225 | config PCI_DOMAINS_GENERIC |
1226 | def_bool PCI_DOMAINS | |
1227 | ||
b080ac8a MRJ |
1228 | config PCI_NANOENGINE |
1229 | bool "BSE nanoEngine PCI support" | |
1230 | depends on SA1100_NANOENGINE | |
1231 | help | |
1232 | Enable PCI on the BSE nanoEngine board. | |
1233 | ||
36e23590 MW |
1234 | config PCI_SYSCALL |
1235 | def_bool PCI | |
1236 | ||
a0113a99 MR |
1237 | config PCI_HOST_ITE8152 |
1238 | bool | |
1239 | depends on PCI && MACH_ARMCORE | |
1240 | default y | |
1241 | select DMABOUNCE | |
1242 | ||
1da177e4 LT |
1243 | source "drivers/pci/Kconfig" |
1244 | ||
1245 | source "drivers/pcmcia/Kconfig" | |
1246 | ||
1247 | endmenu | |
1248 | ||
1249 | menu "Kernel Features" | |
1250 | ||
3b55658a DM |
1251 | config HAVE_SMP |
1252 | bool | |
1253 | help | |
1254 | This option should be selected by machines which have an SMP- | |
1255 | capable CPU. | |
1256 | ||
1257 | The only effect of this option is to make the SMP-related | |
1258 | options available to the user for configuration. | |
1259 | ||
1da177e4 | 1260 | config SMP |
bb2d8130 | 1261 | bool "Symmetric Multi-Processing" |
fbb4ddac | 1262 | depends on CPU_V6K || CPU_V7 |
bc28248e | 1263 | depends on GENERIC_CLOCKEVENTS |
3b55658a | 1264 | depends on HAVE_SMP |
801bb21c | 1265 | depends on MMU || ARM_MPU |
0361748f | 1266 | select IRQ_WORK |
1da177e4 LT |
1267 | help |
1268 | This enables support for systems with more than one CPU. If you have | |
4a474157 RG |
1269 | a system with only one CPU, say N. If you have a system with more |
1270 | than one CPU, say Y. | |
1da177e4 | 1271 | |
4a474157 | 1272 | If you say N here, the kernel will run on uni- and multiprocessor |
1da177e4 | 1273 | machines, but will use only one CPU of a multiprocessor machine. If |
4a474157 RG |
1274 | you say Y here, the kernel will run on many, but not all, |
1275 | uniprocessor machines. On a uniprocessor machine, the kernel | |
1276 | will run faster if you say N here. | |
1da177e4 | 1277 | |
395cf969 | 1278 | See also <file:Documentation/x86/i386/IO-APIC.txt>, |
1da177e4 | 1279 | <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at |
50a23e6e | 1280 | <http://tldp.org/HOWTO/SMP-HOWTO.html>. |
1da177e4 LT |
1281 | |
1282 | If you don't know what to do here, say N. | |
1283 | ||
f00ec48f | 1284 | config SMP_ON_UP |
5744ff43 | 1285 | bool "Allow booting SMP kernel on uniprocessor systems" |
801bb21c | 1286 | depends on SMP && !XIP_KERNEL && MMU |
f00ec48f RK |
1287 | default y |
1288 | help | |
1289 | SMP kernels contain instructions which fail on non-SMP processors. | |
1290 | Enabling this option allows the kernel to modify itself to make | |
1291 | these instructions safe. Disabling it allows about 1K of space | |
1292 | savings. | |
1293 | ||
1294 | If you don't know what to do here, say Y. | |
1295 | ||
c9018aab VG |
1296 | config ARM_CPU_TOPOLOGY |
1297 | bool "Support cpu topology definition" | |
1298 | depends on SMP && CPU_V7 | |
1299 | default y | |
1300 | help | |
1301 | Support ARM cpu topology definition. The MPIDR register defines | |
1302 | affinity between processors which is then used to describe the cpu | |
1303 | topology of an ARM System. | |
1304 | ||
1305 | config SCHED_MC | |
1306 | bool "Multi-core scheduler support" | |
1307 | depends on ARM_CPU_TOPOLOGY | |
1308 | help | |
1309 | Multi-core scheduler support improves the CPU scheduler's decision | |
1310 | making when dealing with multi-core CPU chips at a cost of slightly | |
1311 | increased overhead in some places. If unsure say N here. | |
1312 | ||
1313 | config SCHED_SMT | |
1314 | bool "SMT scheduler support" | |
1315 | depends on ARM_CPU_TOPOLOGY | |
1316 | help | |
1317 | Improves the CPU scheduler's decision making when dealing with | |
1318 | MultiThreading at a cost of slightly increased overhead in some | |
1319 | places. If unsure say N here. | |
1320 | ||
a8cbcd92 RK |
1321 | config HAVE_ARM_SCU |
1322 | bool | |
a8cbcd92 RK |
1323 | help |
1324 | This option enables support for the ARM system coherency unit | |
1325 | ||
8a4da6e3 | 1326 | config HAVE_ARM_ARCH_TIMER |
022c03a2 MZ |
1327 | bool "Architected timer support" |
1328 | depends on CPU_V7 | |
8a4da6e3 | 1329 | select ARM_ARCH_TIMER |
0c403462 | 1330 | select GENERIC_CLOCKEVENTS |
022c03a2 MZ |
1331 | help |
1332 | This option enables support for the ARM architected timer | |
1333 | ||
f32f4ce2 RK |
1334 | config HAVE_ARM_TWD |
1335 | bool | |
da4a686a | 1336 | select CLKSRC_OF if OF |
f32f4ce2 RK |
1337 | help |
1338 | This options enables support for the ARM timer and watchdog unit | |
1339 | ||
e8db288e NP |
1340 | config MCPM |
1341 | bool "Multi-Cluster Power Management" | |
1342 | depends on CPU_V7 && SMP | |
1343 | help | |
1344 | This option provides the common power management infrastructure | |
1345 | for (multi-)cluster based systems, such as big.LITTLE based | |
1346 | systems. | |
1347 | ||
ebf4a5c5 HZ |
1348 | config MCPM_QUAD_CLUSTER |
1349 | bool | |
1350 | depends on MCPM | |
1351 | help | |
1352 | To avoid wasting resources unnecessarily, MCPM only supports up | |
1353 | to 2 clusters by default. | |
1354 | Platforms with 3 or 4 clusters that use MCPM must select this | |
1355 | option to allow the additional clusters to be managed. | |
1356 | ||
1c33be57 NP |
1357 | config BIG_LITTLE |
1358 | bool "big.LITTLE support (Experimental)" | |
1359 | depends on CPU_V7 && SMP | |
1360 | select MCPM | |
1361 | help | |
1362 | This option enables support selections for the big.LITTLE | |
1363 | system architecture. | |
1364 | ||
1365 | config BL_SWITCHER | |
1366 | bool "big.LITTLE switcher support" | |
6c044fec | 1367 | depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC |
51aaf81f | 1368 | select CPU_PM |
1c33be57 NP |
1369 | help |
1370 | The big.LITTLE "switcher" provides the core functionality to | |
1371 | transparently handle transition between a cluster of A15's | |
1372 | and a cluster of A7's in a big.LITTLE system. | |
1373 | ||
b22537c6 NP |
1374 | config BL_SWITCHER_DUMMY_IF |
1375 | tristate "Simple big.LITTLE switcher user interface" | |
1376 | depends on BL_SWITCHER && DEBUG_KERNEL | |
1377 | help | |
1378 | This is a simple and dummy char dev interface to control | |
1379 | the big.LITTLE switcher core code. It is meant for | |
1380 | debugging purposes only. | |
1381 | ||
8d5796d2 LB |
1382 | choice |
1383 | prompt "Memory split" | |
006fa259 | 1384 | depends on MMU |
8d5796d2 LB |
1385 | default VMSPLIT_3G |
1386 | help | |
1387 | Select the desired split between kernel and user memory. | |
1388 | ||
1389 | If you are not absolutely sure what you are doing, leave this | |
1390 | option alone! | |
1391 | ||
1392 | config VMSPLIT_3G | |
1393 | bool "3G/1G user/kernel split" | |
63ce446c NP |
1394 | config VMSPLIT_3G_OPT |
1395 | bool "3G/1G user/kernel split (for full 1G low memory)" | |
8d5796d2 LB |
1396 | config VMSPLIT_2G |
1397 | bool "2G/2G user/kernel split" | |
1398 | config VMSPLIT_1G | |
1399 | bool "1G/3G user/kernel split" | |
1400 | endchoice | |
1401 | ||
1402 | config PAGE_OFFSET | |
1403 | hex | |
006fa259 | 1404 | default PHYS_OFFSET if !MMU |
8d5796d2 LB |
1405 | default 0x40000000 if VMSPLIT_1G |
1406 | default 0x80000000 if VMSPLIT_2G | |
63ce446c | 1407 | default 0xB0000000 if VMSPLIT_3G_OPT |
8d5796d2 LB |
1408 | default 0xC0000000 |
1409 | ||
1da177e4 LT |
1410 | config NR_CPUS |
1411 | int "Maximum number of CPUs (2-32)" | |
1412 | range 2 32 | |
1413 | depends on SMP | |
1414 | default "4" | |
1415 | ||
a054a811 | 1416 | config HOTPLUG_CPU |
00b7dede | 1417 | bool "Support for hot-pluggable CPUs" |
40b31360 | 1418 | depends on SMP |
a054a811 RK |
1419 | help |
1420 | Say Y here to experiment with turning CPUs off and on. CPUs | |
1421 | can be controlled through /sys/devices/system/cpu. | |
1422 | ||
2bdd424f WD |
1423 | config ARM_PSCI |
1424 | bool "Support for the ARM Power State Coordination Interface (PSCI)" | |
e679660d | 1425 | depends on HAVE_ARM_SMCCC |
be120397 | 1426 | select ARM_PSCI_FW |
2bdd424f WD |
1427 | help |
1428 | Say Y here if you want Linux to communicate with system firmware | |
1429 | implementing the PSCI specification for CPU-centric power | |
1430 | management operations described in ARM document number ARM DEN | |
1431 | 0022A ("Power State Coordination Interface System Software on | |
1432 | ARM processors"). | |
1433 | ||
2a6ad871 MR |
1434 | # The GPIO number here must be sorted by descending number. In case of |
1435 | # a multiplatform kernel, we just want the highest value required by the | |
1436 | # selected platforms. | |
44986ab0 PDSN |
1437 | config ARCH_NR_GPIO |
1438 | int | |
b35d2e56 GF |
1439 | default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \ |
1440 | ARCH_ZYNQ | |
aa42587a TF |
1441 | default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ |
1442 | SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 | |
eb171a99 | 1443 | default 416 if ARCH_SUNXI |
06b851e5 | 1444 | default 392 if ARCH_U8500 |
01bb914c | 1445 | default 352 if ARCH_VT8500 |
7b5da4c3 | 1446 | default 288 if ARCH_ROCKCHIP |
2a6ad871 | 1447 | default 264 if MACH_H4700 |
44986ab0 PDSN |
1448 | default 0 |
1449 | help | |
1450 | Maximum number of GPIOs in the system. | |
1451 | ||
1452 | If unsure, leave the default value. | |
1453 | ||
d45a398f | 1454 | source kernel/Kconfig.preempt |
1da177e4 | 1455 | |
c9218b16 | 1456 | config HZ_FIXED |
f8065813 | 1457 | int |
070b8b43 | 1458 | default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \ |
a73ddc61 | 1459 | ARCH_S5PV210 || ARCH_EXYNOS4 |
1164f672 | 1460 | default 128 if SOC_AT91RM9200 |
47d84682 | 1461 | default 0 |
c9218b16 RK |
1462 | |
1463 | choice | |
47d84682 | 1464 | depends on HZ_FIXED = 0 |
c9218b16 RK |
1465 | prompt "Timer frequency" |
1466 | ||
1467 | config HZ_100 | |
1468 | bool "100 Hz" | |
1469 | ||
1470 | config HZ_200 | |
1471 | bool "200 Hz" | |
1472 | ||
1473 | config HZ_250 | |
1474 | bool "250 Hz" | |
1475 | ||
1476 | config HZ_300 | |
1477 | bool "300 Hz" | |
1478 | ||
1479 | config HZ_500 | |
1480 | bool "500 Hz" | |
1481 | ||
1482 | config HZ_1000 | |
1483 | bool "1000 Hz" | |
1484 | ||
1485 | endchoice | |
1486 | ||
1487 | config HZ | |
1488 | int | |
47d84682 | 1489 | default HZ_FIXED if HZ_FIXED != 0 |
c9218b16 RK |
1490 | default 100 if HZ_100 |
1491 | default 200 if HZ_200 | |
1492 | default 250 if HZ_250 | |
1493 | default 300 if HZ_300 | |
1494 | default 500 if HZ_500 | |
1495 | default 1000 | |
1496 | ||
1497 | config SCHED_HRTICK | |
1498 | def_bool HIGH_RES_TIMERS | |
f8065813 | 1499 | |
16c79651 | 1500 | config THUMB2_KERNEL |
bc7dea00 | 1501 | bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY |
4477ca45 | 1502 | depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K |
bc7dea00 | 1503 | default y if CPU_THUMBONLY |
16c79651 CM |
1504 | select AEABI |
1505 | select ARM_ASM_UNIFIED | |
89bace65 | 1506 | select ARM_UNWIND |
16c79651 CM |
1507 | help |
1508 | By enabling this option, the kernel will be compiled in | |
1509 | Thumb-2 mode. A compiler/assembler that understand the unified | |
1510 | ARM-Thumb syntax is needed. | |
1511 | ||
1512 | If unsure, say N. | |
1513 | ||
6f685c5c DM |
1514 | config THUMB2_AVOID_R_ARM_THM_JUMP11 |
1515 | bool "Work around buggy Thumb-2 short branch relocations in gas" | |
1516 | depends on THUMB2_KERNEL && MODULES | |
1517 | default y | |
1518 | help | |
1519 | Various binutils versions can resolve Thumb-2 branches to | |
1520 | locally-defined, preemptible global symbols as short-range "b.n" | |
1521 | branch instructions. | |
1522 | ||
1523 | This is a problem, because there's no guarantee the final | |
1524 | destination of the symbol, or any candidate locations for a | |
1525 | trampoline, are within range of the branch. For this reason, the | |
1526 | kernel does not support fixing up the R_ARM_THM_JUMP11 (102) | |
1527 | relocation in modules at all, and it makes little sense to add | |
1528 | support. | |
1529 | ||
1530 | The symptom is that the kernel fails with an "unsupported | |
1531 | relocation" error when loading some modules. | |
1532 | ||
1533 | Until fixed tools are available, passing | |
1534 | -fno-optimize-sibling-calls to gcc should prevent gcc generating | |
1535 | code which hits this problem, at the cost of a bit of extra runtime | |
1536 | stack usage in some cases. | |
1537 | ||
1538 | The problem is described in more detail at: | |
1539 | https://bugs.launchpad.net/binutils-linaro/+bug/725126 | |
1540 | ||
1541 | Only Thumb-2 kernels are affected. | |
1542 | ||
1543 | Unless you are sure your tools don't have this problem, say Y. | |
1544 | ||
0becb088 CM |
1545 | config ARM_ASM_UNIFIED |
1546 | bool | |
1547 | ||
42f25bdd NP |
1548 | config ARM_PATCH_IDIV |
1549 | bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()" | |
1550 | depends on CPU_32v7 && !XIP_KERNEL | |
1551 | default y | |
1552 | help | |
1553 | The ARM compiler inserts calls to __aeabi_idiv() and | |
1554 | __aeabi_uidiv() when it needs to perform division on signed | |
1555 | and unsigned integers. Some v7 CPUs have support for the sdiv | |
1556 | and udiv instructions that can be used to implement those | |
1557 | functions. | |
1558 | ||
1559 | Enabling this option allows the kernel to modify itself to | |
1560 | replace the first two instructions of these library functions | |
1561 | with the sdiv or udiv plus "bx lr" instructions when the CPU | |
1562 | it is running on supports them. Typically this will be faster | |
1563 | and less power intensive than running the original library | |
1564 | code to do integer division. | |
1565 | ||
704bdda0 NP |
1566 | config AEABI |
1567 | bool "Use the ARM EABI to compile the kernel" | |
1568 | help | |
1569 | This option allows for the kernel to be compiled using the latest | |
1570 | ARM ABI (aka EABI). This is only useful if you are using a user | |
1571 | space environment that is also compiled with EABI. | |
1572 | ||
1573 | Since there are major incompatibilities between the legacy ABI and | |
1574 | EABI, especially with regard to structure member alignment, this | |
1575 | option also changes the kernel syscall calling convention to | |
1576 | disambiguate both ABIs and allow for backward compatibility support | |
1577 | (selected with CONFIG_OABI_COMPAT). | |
1578 | ||
1579 | To use this you need GCC version 4.0.0 or later. | |
1580 | ||
6c90c872 | 1581 | config OABI_COMPAT |
a73a3ff1 | 1582 | bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" |
d6f94fa0 | 1583 | depends on AEABI && !THUMB2_KERNEL |
6c90c872 NP |
1584 | help |
1585 | This option preserves the old syscall interface along with the | |
1586 | new (ARM EABI) one. It also provides a compatibility layer to | |
1587 | intercept syscalls that have structure arguments which layout | |
1588 | in memory differs between the legacy ABI and the new ARM EABI | |
1589 | (only for non "thumb" binaries). This option adds a tiny | |
1590 | overhead to all syscalls and produces a slightly larger kernel. | |
91702175 KC |
1591 | |
1592 | The seccomp filter system will not be available when this is | |
1593 | selected, since there is no way yet to sensibly distinguish | |
1594 | between calling conventions during filtering. | |
1595 | ||
6c90c872 NP |
1596 | If you know you'll be using only pure EABI user space then you |
1597 | can say N here. If this option is not selected and you attempt | |
1598 | to execute a legacy ABI binary then the result will be | |
1599 | UNPREDICTABLE (in fact it can be predicted that it won't work | |
b02f8467 | 1600 | at all). If in doubt say N. |
6c90c872 | 1601 | |
eb33575c | 1602 | config ARCH_HAS_HOLES_MEMORYMODEL |
e80d6a24 | 1603 | bool |
e80d6a24 | 1604 | |
05944d74 RK |
1605 | config ARCH_SPARSEMEM_ENABLE |
1606 | bool | |
1607 | ||
07a2f737 RK |
1608 | config ARCH_SPARSEMEM_DEFAULT |
1609 | def_bool ARCH_SPARSEMEM_ENABLE | |
1610 | ||
05944d74 | 1611 | config ARCH_SELECT_MEMORY_MODEL |
be370302 | 1612 | def_bool ARCH_SPARSEMEM_ENABLE |
c80d79d7 | 1613 | |
7b7bf499 WD |
1614 | config HAVE_ARCH_PFN_VALID |
1615 | def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM | |
1616 | ||
b8cd51af SC |
1617 | config HAVE_GENERIC_RCU_GUP |
1618 | def_bool y | |
1619 | depends on ARM_LPAE | |
1620 | ||
053a96ca | 1621 | config HIGHMEM |
e8db89a2 RK |
1622 | bool "High Memory Support" |
1623 | depends on MMU | |
053a96ca NP |
1624 | help |
1625 | The address space of ARM processors is only 4 Gigabytes large | |
1626 | and it has to accommodate user address space, kernel address | |
1627 | space as well as some memory mapped IO. That means that, if you | |
1628 | have a large amount of physical memory and/or IO, not all of the | |
1629 | memory can be "permanently mapped" by the kernel. The physical | |
1630 | memory that is not permanently mapped is called "high memory". | |
1631 | ||
1632 | Depending on the selected kernel/user memory split, minimum | |
1633 | vmalloc space and actual amount of RAM, you may not need this | |
1634 | option which should result in a slightly faster kernel. | |
1635 | ||
1636 | If unsure, say n. | |
1637 | ||
65cec8e3 | 1638 | config HIGHPTE |
9a431bd5 | 1639 | bool "Allocate 2nd-level pagetables from highmem" if EXPERT |
65cec8e3 | 1640 | depends on HIGHMEM |
9a431bd5 | 1641 | default y |
b4d103d1 RK |
1642 | help |
1643 | The VM uses one page of physical memory for each page table. | |
1644 | For systems with a lot of processes, this can use a lot of | |
1645 | precious low memory, eventually leading to low memory being | |
1646 | consumed by page tables. Setting this option will allow | |
1647 | user-space 2nd level page tables to reside in high memory. | |
65cec8e3 | 1648 | |
a5e090ac RK |
1649 | config CPU_SW_DOMAIN_PAN |
1650 | bool "Enable use of CPU domains to implement privileged no-access" | |
1651 | depends on MMU && !ARM_LPAE | |
1b8873a0 JI |
1652 | default y |
1653 | help | |
a5e090ac RK |
1654 | Increase kernel security by ensuring that normal kernel accesses |
1655 | are unable to access userspace addresses. This can help prevent | |
1656 | use-after-free bugs becoming an exploitable privilege escalation | |
1657 | by ensuring that magic values (such as LIST_POISON) will always | |
1658 | fault when dereferenced. | |
1659 | ||
1660 | CPUs with low-vector mappings use a best-efforts implementation. | |
1661 | Their lower 1MB needs to remain accessible for the vectors, but | |
1662 | the remainder of userspace will become appropriately inaccessible. | |
65cec8e3 | 1663 | |
1b8873a0 | 1664 | config HW_PERF_EVENTS |
fa8ad788 MR |
1665 | def_bool y |
1666 | depends on ARM_PMU | |
1b8873a0 | 1667 | |
1355e2a6 CM |
1668 | config SYS_SUPPORTS_HUGETLBFS |
1669 | def_bool y | |
1670 | depends on ARM_LPAE | |
1671 | ||
8d962507 CM |
1672 | config HAVE_ARCH_TRANSPARENT_HUGEPAGE |
1673 | def_bool y | |
1674 | depends on ARM_LPAE | |
1675 | ||
4bfab203 SC |
1676 | config ARCH_WANT_GENERAL_HUGETLB |
1677 | def_bool y | |
1678 | ||
7d485f64 AB |
1679 | config ARM_MODULE_PLTS |
1680 | bool "Use PLTs to allow module memory to spill over into vmalloc area" | |
1681 | depends on MODULES | |
1682 | help | |
1683 | Allocate PLTs when loading modules so that jumps and calls whose | |
1684 | targets are too far away for their relative offsets to be encoded | |
1685 | in the instructions themselves can be bounced via veneers in the | |
1686 | module's PLT. This allows modules to be allocated in the generic | |
1687 | vmalloc area after the dedicated module memory area has been | |
1688 | exhausted. The modules will use slightly more memory, but after | |
1689 | rounding up to page size, the actual memory footprint is usually | |
1690 | the same. | |
1691 | ||
1692 | Say y if you are getting out of memory errors while loading modules | |
1693 | ||
3f22ab27 DH |
1694 | source "mm/Kconfig" |
1695 | ||
c1b2d970 | 1696 | config FORCE_MAX_ZONEORDER |
36d6c928 | 1697 | int "Maximum zone order" |
898f08e1 | 1698 | default "12" if SOC_AM33XX |
6d85e2b0 | 1699 | default "9" if SA1111 || ARCH_EFM32 |
c1b2d970 MD |
1700 | default "11" |
1701 | help | |
1702 | The kernel memory allocator divides physically contiguous memory | |
1703 | blocks into "zones", where each zone is a power of two number of | |
1704 | pages. This option selects the largest power of two that the kernel | |
1705 | keeps in the memory allocator. If you need to allocate very large | |
1706 | blocks of physically contiguous memory, then you may need to | |
1707 | increase this value. | |
1708 | ||
1709 | This config option is actually maximum order plus one. For example, | |
1710 | a value of 11 means that the largest free memory block is 2^10 pages. | |
1711 | ||
1da177e4 LT |
1712 | config ALIGNMENT_TRAP |
1713 | bool | |
f12d0d7c | 1714 | depends on CPU_CP15_MMU |
1da177e4 | 1715 | default y if !ARCH_EBSA110 |
e119bfff | 1716 | select HAVE_PROC_CPU if PROC_FS |
1da177e4 | 1717 | help |
84eb8d06 | 1718 | ARM processors cannot fetch/store information which is not |
1da177e4 LT |
1719 | naturally aligned on the bus, i.e., a 4 byte fetch must start at an |
1720 | address divisible by 4. On 32-bit ARM processors, these non-aligned | |
1721 | fetch/store instructions will be emulated in software if you say | |
1722 | here, which has a severe performance impact. This is necessary for | |
1723 | correct operation of some network protocols. With an IP-only | |
1724 | configuration it is safe to say N, otherwise say Y. | |
1725 | ||
39ec58f3 | 1726 | config UACCESS_WITH_MEMCPY |
38ef2ad5 LW |
1727 | bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()" |
1728 | depends on MMU | |
39ec58f3 LB |
1729 | default y if CPU_FEROCEON |
1730 | help | |
1731 | Implement faster copy_to_user and clear_user methods for CPU | |
1732 | cores where a 8-word STM instruction give significantly higher | |
1733 | memory write throughput than a sequence of individual 32bit stores. | |
1734 | ||
1735 | A possible side effect is a slight increase in scheduling latency | |
1736 | between threads sharing the same address space if they invoke | |
1737 | such copy operations with large buffers. | |
1738 | ||
1739 | However, if the CPU data cache is using a write-allocate mode, | |
1740 | this option is unlikely to provide any performance gain. | |
1741 | ||
70c70d97 NP |
1742 | config SECCOMP |
1743 | bool | |
1744 | prompt "Enable seccomp to safely compute untrusted bytecode" | |
1745 | ---help--- | |
1746 | This kernel feature is useful for number crunching applications | |
1747 | that may need to compute untrusted bytecode during their | |
1748 | execution. By using pipes or other transports made available to | |
1749 | the process as file descriptors supporting the read/write | |
1750 | syscalls, it's possible to isolate those applications in | |
1751 | their own address space using seccomp. Once seccomp is | |
1752 | enabled via prctl(PR_SET_SECCOMP), it cannot be disabled | |
1753 | and the task is only allowed to execute a few safe syscalls | |
1754 | defined by each seccomp mode. | |
1755 | ||
06e6295b SS |
1756 | config SWIOTLB |
1757 | def_bool y | |
1758 | ||
1759 | config IOMMU_HELPER | |
1760 | def_bool SWIOTLB | |
1761 | ||
02c2433b SS |
1762 | config PARAVIRT |
1763 | bool "Enable paravirtualization code" | |
1764 | help | |
1765 | This changes the kernel so it can modify itself when it is run | |
1766 | under a hypervisor, potentially improving performance significantly | |
1767 | over full virtualization. | |
1768 | ||
1769 | config PARAVIRT_TIME_ACCOUNTING | |
1770 | bool "Paravirtual steal time accounting" | |
1771 | select PARAVIRT | |
1772 | default n | |
1773 | help | |
1774 | Select this option to enable fine granularity task steal time | |
1775 | accounting. Time spent executing other tasks in parallel with | |
1776 | the current vCPU is discounted from the vCPU power. To account for | |
1777 | that, there can be a small performance impact. | |
1778 | ||
1779 | If in doubt, say N here. | |
1780 | ||
eff8d644 SS |
1781 | config XEN_DOM0 |
1782 | def_bool y | |
1783 | depends on XEN | |
1784 | ||
1785 | config XEN | |
c2ba1f7d | 1786 | bool "Xen guest support on ARM" |
85323a99 | 1787 | depends on ARM && AEABI && OF |
f880b67d | 1788 | depends on CPU_V7 && !CPU_V6 |
85323a99 | 1789 | depends on !GENERIC_ATOMIC64 |
7693decc | 1790 | depends on MMU |
51aaf81f | 1791 | select ARCH_DMA_ADDR_T_64BIT |
17b7ab80 | 1792 | select ARM_PSCI |
83862ccf | 1793 | select SWIOTLB_XEN |
02c2433b | 1794 | select PARAVIRT |
eff8d644 SS |
1795 | help |
1796 | Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. | |
1797 | ||
1da177e4 LT |
1798 | endmenu |
1799 | ||
1800 | menu "Boot options" | |
1801 | ||
9eb8f674 GL |
1802 | config USE_OF |
1803 | bool "Flattened Device Tree support" | |
b1b3f49c | 1804 | select IRQ_DOMAIN |
9eb8f674 | 1805 | select OF |
9eb8f674 GL |
1806 | help |
1807 | Include support for flattened device tree machine descriptions. | |
1808 | ||
bd51e2f5 NP |
1809 | config ATAGS |
1810 | bool "Support for the traditional ATAGS boot data passing" if USE_OF | |
1811 | default y | |
1812 | help | |
1813 | This is the traditional way of passing data to the kernel at boot | |
1814 | time. If you are solely relying on the flattened device tree (or | |
1815 | the ARM_ATAG_DTB_COMPAT option) then you may unselect this option | |
1816 | to remove ATAGS support from your kernel binary. If unsure, | |
1817 | leave this to y. | |
1818 | ||
1819 | config DEPRECATED_PARAM_STRUCT | |
1820 | bool "Provide old way to pass kernel parameters" | |
1821 | depends on ATAGS | |
1822 | help | |
1823 | This was deprecated in 2001 and announced to live on for 5 years. | |
1824 | Some old boot loaders still use this way. | |
1825 | ||
1da177e4 LT |
1826 | # Compressed boot loader in ROM. Yes, we really want to ask about |
1827 | # TEXT and BSS so we preserve their values in the config files. | |
1828 | config ZBOOT_ROM_TEXT | |
1829 | hex "Compressed ROM boot loader base address" | |
1830 | default "0" | |
1831 | help | |
1832 | The physical address at which the ROM-able zImage is to be | |
1833 | placed in the target. Platforms which normally make use of | |
1834 | ROM-able zImage formats normally set this to a suitable | |
1835 | value in their defconfig file. | |
1836 | ||
1837 | If ZBOOT_ROM is not enabled, this has no effect. | |
1838 | ||
1839 | config ZBOOT_ROM_BSS | |
1840 | hex "Compressed ROM boot loader BSS address" | |
1841 | default "0" | |
1842 | help | |
f8c440b2 DF |
1843 | The base address of an area of read/write memory in the target |
1844 | for the ROM-able zImage which must be available while the | |
1845 | decompressor is running. It must be large enough to hold the | |
1846 | entire decompressed kernel plus an additional 128 KiB. | |
1847 | Platforms which normally make use of ROM-able zImage formats | |
1848 | normally set this to a suitable value in their defconfig file. | |
1da177e4 LT |
1849 | |
1850 | If ZBOOT_ROM is not enabled, this has no effect. | |
1851 | ||
1852 | config ZBOOT_ROM | |
1853 | bool "Compressed boot loader in ROM/flash" | |
1854 | depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS | |
10968131 | 1855 | depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR |
1da177e4 LT |
1856 | help |
1857 | Say Y here if you intend to execute your compressed kernel image | |
1858 | (zImage) directly from ROM or flash. If unsure, say N. | |
1859 | ||
e2a6a3aa JB |
1860 | config ARM_APPENDED_DTB |
1861 | bool "Use appended device tree blob to zImage (EXPERIMENTAL)" | |
10968131 | 1862 | depends on OF |
e2a6a3aa JB |
1863 | help |
1864 | With this option, the boot code will look for a device tree binary | |
1865 | (DTB) appended to zImage | |
1866 | (e.g. cat zImage <filename>.dtb > zImage_w_dtb). | |
1867 | ||
1868 | This is meant as a backward compatibility convenience for those | |
1869 | systems with a bootloader that can't be upgraded to accommodate | |
1870 | the documented boot protocol using a device tree. | |
1871 | ||
1872 | Beware that there is very little in terms of protection against | |
1873 | this option being confused by leftover garbage in memory that might | |
1874 | look like a DTB header after a reboot if no actual DTB is appended | |
1875 | to zImage. Do not leave this option active in a production kernel | |
1876 | if you don't intend to always append a DTB. Proper passing of the | |
1877 | location into r2 of a bootloader provided DTB is always preferable | |
1878 | to this option. | |
1879 | ||
b90b9a38 NP |
1880 | config ARM_ATAG_DTB_COMPAT |
1881 | bool "Supplement the appended DTB with traditional ATAG information" | |
1882 | depends on ARM_APPENDED_DTB | |
1883 | help | |
1884 | Some old bootloaders can't be updated to a DTB capable one, yet | |
1885 | they provide ATAGs with memory configuration, the ramdisk address, | |
1886 | the kernel cmdline string, etc. Such information is dynamically | |
1887 | provided by the bootloader and can't always be stored in a static | |
1888 | DTB. To allow a device tree enabled kernel to be used with such | |
1889 | bootloaders, this option allows zImage to extract the information | |
1890 | from the ATAG list and store it at run time into the appended DTB. | |
1891 | ||
d0f34a11 GR |
1892 | choice |
1893 | prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT | |
1894 | default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER | |
1895 | ||
1896 | config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER | |
1897 | bool "Use bootloader kernel arguments if available" | |
1898 | help | |
1899 | Uses the command-line options passed by the boot loader instead of | |
1900 | the device tree bootargs property. If the boot loader doesn't provide | |
1901 | any, the device tree bootargs property will be used. | |
1902 | ||
1903 | config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND | |
1904 | bool "Extend with bootloader kernel arguments" | |
1905 | help | |
1906 | The command-line arguments provided by the boot loader will be | |
1907 | appended to the the device tree bootargs property. | |
1908 | ||
1909 | endchoice | |
1910 | ||
1da177e4 LT |
1911 | config CMDLINE |
1912 | string "Default kernel command string" | |
1913 | default "" | |
1914 | help | |
1915 | On some architectures (EBSA110 and CATS), there is currently no way | |
1916 | for the boot loader to pass arguments to the kernel. For these | |
1917 | architectures, you should supply some command-line options at build | |
1918 | time by entering them here. As a minimum, you should specify the | |
1919 | memory size and the root device (e.g., mem=64M root=/dev/nfs). | |
1920 | ||
4394c124 VB |
1921 | choice |
1922 | prompt "Kernel command line type" if CMDLINE != "" | |
1923 | default CMDLINE_FROM_BOOTLOADER | |
bd51e2f5 | 1924 | depends on ATAGS |
4394c124 VB |
1925 | |
1926 | config CMDLINE_FROM_BOOTLOADER | |
1927 | bool "Use bootloader kernel arguments if available" | |
1928 | help | |
1929 | Uses the command-line options passed by the boot loader. If | |
1930 | the boot loader doesn't provide any, the default kernel command | |
1931 | string provided in CMDLINE will be used. | |
1932 | ||
1933 | config CMDLINE_EXTEND | |
1934 | bool "Extend bootloader kernel arguments" | |
1935 | help | |
1936 | The command-line arguments provided by the boot loader will be | |
1937 | appended to the default kernel command string. | |
1938 | ||
92d2040d AH |
1939 | config CMDLINE_FORCE |
1940 | bool "Always use the default kernel command string" | |
92d2040d AH |
1941 | help |
1942 | Always use the default kernel command string, even if the boot | |
1943 | loader passes other arguments to the kernel. | |
1944 | This is useful if you cannot or don't want to change the | |
1945 | command-line options your boot loader passes to the kernel. | |
4394c124 | 1946 | endchoice |
92d2040d | 1947 | |
1da177e4 LT |
1948 | config XIP_KERNEL |
1949 | bool "Kernel Execute-In-Place from ROM" | |
10968131 | 1950 | depends on !ARM_LPAE && !ARCH_MULTIPLATFORM |
1da177e4 LT |
1951 | help |
1952 | Execute-In-Place allows the kernel to run from non-volatile storage | |
1953 | directly addressable by the CPU, such as NOR flash. This saves RAM | |
1954 | space since the text section of the kernel is not loaded from flash | |
1955 | to RAM. Read-write sections, such as the data section and stack, | |
1956 | are still copied to RAM. The XIP kernel is not compressed since | |
1957 | it has to run directly from flash, so it will take more space to | |
1958 | store it. The flash address used to link the kernel object files, | |
1959 | and for storing it, is configuration dependent. Therefore, if you | |
1960 | say Y here, you must know the proper physical address where to | |
1961 | store the kernel image depending on your own flash memory usage. | |
1962 | ||
1963 | Also note that the make target becomes "make xipImage" rather than | |
1964 | "make zImage" or "make Image". The final kernel binary to put in | |
1965 | ROM memory will be arch/arm/boot/xipImage. | |
1966 | ||
1967 | If unsure, say N. | |
1968 | ||
1969 | config XIP_PHYS_ADDR | |
1970 | hex "XIP Kernel Physical Location" | |
1971 | depends on XIP_KERNEL | |
1972 | default "0x00080000" | |
1973 | help | |
1974 | This is the physical address in your flash memory the kernel will | |
1975 | be linked for and stored to. This address is dependent on your | |
1976 | own flash usage. | |
1977 | ||
c587e4a6 RP |
1978 | config KEXEC |
1979 | bool "Kexec system call (EXPERIMENTAL)" | |
19ab428f | 1980 | depends on (!SMP || PM_SLEEP_SMP) |
cb1293e2 | 1981 | depends on !CPU_V7M |
2965faa5 | 1982 | select KEXEC_CORE |
c587e4a6 RP |
1983 | help |
1984 | kexec is a system call that implements the ability to shutdown your | |
1985 | current kernel, and to start another kernel. It is like a reboot | |
01dd2fbf | 1986 | but it is independent of the system firmware. And like a reboot |
c587e4a6 RP |
1987 | you can start any kernel with it, not just Linux. |
1988 | ||
1989 | It is an ongoing process to be certain the hardware in a machine | |
1990 | is properly shutdown, so do not be surprised if this code does not | |
bf220695 | 1991 | initially work for you. |
c587e4a6 | 1992 | |
4cd9d6f7 RP |
1993 | config ATAGS_PROC |
1994 | bool "Export atags in procfs" | |
bd51e2f5 | 1995 | depends on ATAGS && KEXEC |
b98d7291 | 1996 | default y |
4cd9d6f7 RP |
1997 | help |
1998 | Should the atags used to boot the kernel be exported in an "atags" | |
1999 | file in procfs. Useful with kexec. | |
2000 | ||
cb5d39b3 MW |
2001 | config CRASH_DUMP |
2002 | bool "Build kdump crash kernel (EXPERIMENTAL)" | |
cb5d39b3 MW |
2003 | help |
2004 | Generate crash dump after being started by kexec. This should | |
2005 | be normally only set in special crash dump kernels which are | |
2006 | loaded in the main kernel with kexec-tools into a specially | |
2007 | reserved region and then later executed after a crash by | |
2008 | kdump/kexec. The crash dump kernel must be compiled to a | |
2009 | memory address not used by the main kernel | |
2010 | ||
2011 | For more details see Documentation/kdump/kdump.txt | |
2012 | ||
e69edc79 EM |
2013 | config AUTO_ZRELADDR |
2014 | bool "Auto calculation of the decompressed kernel image address" | |
e69edc79 EM |
2015 | help |
2016 | ZRELADDR is the physical address where the decompressed kernel | |
2017 | image will be placed. If AUTO_ZRELADDR is selected, the address | |
2018 | will be determined at run-time by masking the current IP with | |
2019 | 0xf8000000. This assumes the zImage being placed in the first 128MB | |
2020 | from start of memory. | |
2021 | ||
81a0bc39 RF |
2022 | config EFI_STUB |
2023 | bool | |
2024 | ||
2025 | config EFI | |
2026 | bool "UEFI runtime support" | |
2027 | depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL | |
2028 | select UCS2_STRING | |
2029 | select EFI_PARAMS_FROM_FDT | |
2030 | select EFI_STUB | |
2031 | select EFI_ARMSTUB | |
2032 | select EFI_RUNTIME_WRAPPERS | |
2033 | ---help--- | |
2034 | This option provides support for runtime services provided | |
2035 | by UEFI firmware (such as non-volatile variables, realtime | |
2036 | clock, and platform reset). A UEFI stub is also provided to | |
2037 | allow the kernel to be booted as an EFI application. This | |
2038 | is only useful for kernels that may run on systems that have | |
2039 | UEFI firmware. | |
2040 | ||
1da177e4 LT |
2041 | endmenu |
2042 | ||
ac9d7efc | 2043 | menu "CPU Power Management" |
1da177e4 | 2044 | |
1da177e4 | 2045 | source "drivers/cpufreq/Kconfig" |
1da177e4 | 2046 | |
ac9d7efc RK |
2047 | source "drivers/cpuidle/Kconfig" |
2048 | ||
2049 | endmenu | |
2050 | ||
1da177e4 LT |
2051 | menu "Floating point emulation" |
2052 | ||
2053 | comment "At least one emulation must be selected" | |
2054 | ||
2055 | config FPE_NWFPE | |
2056 | bool "NWFPE math emulation" | |
593c252a | 2057 | depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL |
1da177e4 LT |
2058 | ---help--- |
2059 | Say Y to include the NWFPE floating point emulator in the kernel. | |
2060 | This is necessary to run most binaries. Linux does not currently | |
2061 | support floating point hardware so you need to say Y here even if | |
2062 | your machine has an FPA or floating point co-processor podule. | |
2063 | ||
2064 | You may say N here if you are going to load the Acorn FPEmulator | |
2065 | early in the bootup. | |
2066 | ||
2067 | config FPE_NWFPE_XP | |
2068 | bool "Support extended precision" | |
bedf142b | 2069 | depends on FPE_NWFPE |
1da177e4 LT |
2070 | help |
2071 | Say Y to include 80-bit support in the kernel floating-point | |
2072 | emulator. Otherwise, only 32 and 64-bit support is compiled in. | |
2073 | Note that gcc does not generate 80-bit operations by default, | |
2074 | so in most cases this option only enlarges the size of the | |
2075 | floating point emulator without any good reason. | |
2076 | ||
2077 | You almost surely want to say N here. | |
2078 | ||
2079 | config FPE_FASTFPE | |
2080 | bool "FastFPE math emulation (EXPERIMENTAL)" | |
d6f94fa0 | 2081 | depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 |
1da177e4 LT |
2082 | ---help--- |
2083 | Say Y here to include the FAST floating point emulator in the kernel. | |
2084 | This is an experimental much faster emulator which now also has full | |
2085 | precision for the mantissa. It does not support any exceptions. | |
2086 | It is very simple, and approximately 3-6 times faster than NWFPE. | |
2087 | ||
2088 | It should be sufficient for most programs. It may be not suitable | |
2089 | for scientific calculations, but you have to check this for yourself. | |
2090 | If you do not feel you need a faster FP emulation you should better | |
2091 | choose NWFPE. | |
2092 | ||
2093 | config VFP | |
2094 | bool "VFP-format floating point maths" | |
e399b1a4 | 2095 | depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON |
1da177e4 LT |
2096 | help |
2097 | Say Y to include VFP support code in the kernel. This is needed | |
2098 | if your hardware includes a VFP unit. | |
2099 | ||
2100 | Please see <file:Documentation/arm/VFP/release-notes.txt> for | |
2101 | release notes and additional status information. | |
2102 | ||
2103 | Say N if your target does not have VFP hardware. | |
2104 | ||
25ebee02 CM |
2105 | config VFPv3 |
2106 | bool | |
2107 | depends on VFP | |
2108 | default y if CPU_V7 | |
2109 | ||
b5872db4 CM |
2110 | config NEON |
2111 | bool "Advanced SIMD (NEON) Extension support" | |
2112 | depends on VFPv3 && CPU_V7 | |
2113 | help | |
2114 | Say Y to include support code for NEON, the ARMv7 Advanced SIMD | |
2115 | Extension. | |
2116 | ||
73c132c1 AB |
2117 | config KERNEL_MODE_NEON |
2118 | bool "Support for NEON in kernel mode" | |
c4a30c3b | 2119 | depends on NEON && AEABI |
73c132c1 AB |
2120 | help |
2121 | Say Y to include support for NEON in kernel mode. | |
2122 | ||
1da177e4 LT |
2123 | endmenu |
2124 | ||
2125 | menu "Userspace binary formats" | |
2126 | ||
2127 | source "fs/Kconfig.binfmt" | |
2128 | ||
1da177e4 LT |
2129 | endmenu |
2130 | ||
2131 | menu "Power management options" | |
2132 | ||
eceab4ac | 2133 | source "kernel/power/Kconfig" |
1da177e4 | 2134 | |
f4cb5700 | 2135 | config ARCH_SUSPEND_POSSIBLE |
19a0519d | 2136 | depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \ |
f0d75153 | 2137 | CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK |
f4cb5700 JB |
2138 | def_bool y |
2139 | ||
15e0d9e3 | 2140 | config ARM_CPU_SUSPEND |
8b6f2499 | 2141 | def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW |
1b9bdf5c | 2142 | depends on ARCH_SUSPEND_POSSIBLE |
15e0d9e3 | 2143 | |
603fb42a SC |
2144 | config ARCH_HIBERNATION_POSSIBLE |
2145 | bool | |
2146 | depends on MMU | |
2147 | default y if ARCH_SUSPEND_POSSIBLE | |
2148 | ||
1da177e4 LT |
2149 | endmenu |
2150 | ||
d5950b43 SR |
2151 | source "net/Kconfig" |
2152 | ||
ac25150f | 2153 | source "drivers/Kconfig" |
1da177e4 | 2154 | |
916f743d KG |
2155 | source "drivers/firmware/Kconfig" |
2156 | ||
1da177e4 LT |
2157 | source "fs/Kconfig" |
2158 | ||
1da177e4 LT |
2159 | source "arch/arm/Kconfig.debug" |
2160 | ||
2161 | source "security/Kconfig" | |
2162 | ||
2163 | source "crypto/Kconfig" | |
652ccae5 AB |
2164 | if CRYPTO |
2165 | source "arch/arm/crypto/Kconfig" | |
2166 | endif | |
1da177e4 LT |
2167 | |
2168 | source "lib/Kconfig" | |
749cf76c CD |
2169 | |
2170 | source "arch/arm/kvm/Kconfig" |