]>
Commit | Line | Data |
---|---|---|
b2441318 | 1 | # SPDX-License-Identifier: GPL-2.0 |
1da177e4 LT |
2 | config ARM |
3 | bool | |
4 | default y | |
942fa985 | 5 | select ARCH_32BIT_OFF_T |
1d8f51d4 | 6 | select ARCH_CLOCKSOURCE_DATA |
aef0f78e | 7 | select ARCH_HAS_BINFMT_FLAT |
c7780ab5 | 8 | select ARCH_HAS_DEBUG_VIRTUAL if MMU |
21266be9 | 9 | select ARCH_HAS_DEVMEM_IS_ALLOWED |
419e2f18 | 10 | select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE |
2b68f6ca | 11 | select ARCH_HAS_ELF_RANDOMIZE |
ee333554 | 12 | select ARCH_HAS_FORTIFY_SOURCE |
d8ae8a37 | 13 | select ARCH_HAS_KEEPINITRD |
75851720 | 14 | select ARCH_HAS_KCOV |
e69244d2 | 15 | select ARCH_HAS_MEMBARRIER_SYNC_CORE |
3010a5ea | 16 | select ARCH_HAS_PTE_SPECIAL if ARM_LPAE |
ea8c64ac | 17 | select ARCH_HAS_PHYS_TO_DMA |
347cb6af | 18 | select ARCH_HAS_SETUP_DMA_OPS |
75851720 | 19 | select ARCH_HAS_SET_MEMORY |
ad21fc4f LA |
20 | select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL |
21 | select ARCH_HAS_STRICT_MODULE_RWX if MMU | |
936376f8 CH |
22 | select ARCH_HAS_SYNC_DMA_FOR_DEVICE if SWIOTLB |
23 | select ARCH_HAS_SYNC_DMA_FOR_CPU if SWIOTLB | |
dc2acded | 24 | select ARCH_HAS_TEARDOWN_DMA_OPS if MMU |
3d06770e | 25 | select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST |
171b3f0d | 26 | select ARCH_HAVE_CUSTOM_GPIO_H |
957e3fac | 27 | select ARCH_HAS_GCOV_PROFILE_ALL |
350e88ba | 28 | select ARCH_KEEP_MEMBLOCK if HAVE_ARCH_PFN_VALID || KEXEC |
d7018848 | 29 | select ARCH_MIGHT_HAVE_PC_PARPORT |
7c703e54 | 30 | select ARCH_NO_SG_CHAIN if !ARM_HAS_SG_CHAIN |
ad21fc4f LA |
31 | select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX |
32 | select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7 | |
4badad35 | 33 | select ARCH_SUPPORTS_ATOMIC_RMW |
017f161a | 34 | select ARCH_USE_BUILTIN_BSWAP |
0cbad9c9 | 35 | select ARCH_USE_CMPXCHG_LOCKREF |
dba79c3d | 36 | select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU |
b1b3f49c | 37 | select ARCH_WANT_IPC_PARSE_VERSION |
bdd15a28 | 38 | select BINFMT_FLAT_ARGVP_ENVP_ON_STACK |
ee951c63 | 39 | select BUILDTIME_EXTABLE_SORT if MMU |
171b3f0d | 40 | select CLONE_BACKWARDS |
f00790aa | 41 | select CPU_PM if SUSPEND || CPU_IDLE |
dce5c9e3 | 42 | select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS |
ff4c25f2 | 43 | select DMA_DECLARE_COHERENT |
f0edfea8 | 44 | select DMA_REMAP if MMU |
b01aec9b BP |
45 | select EDAC_SUPPORT |
46 | select EDAC_ATOMIC_SCRUB | |
36d0fd21 | 47 | select GENERIC_ALLOCATOR |
2ef7a295 | 48 | select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY |
f00790aa | 49 | select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI |
b1b3f49c | 50 | select GENERIC_CLOCKEVENTS_BROADCAST if SMP |
ea2d9a96 | 51 | select GENERIC_CPU_AUTOPROBE |
2937367b | 52 | select GENERIC_EARLY_IOREMAP |
171b3f0d | 53 | select GENERIC_IDLE_POLL_SETUP |
b1b3f49c RK |
54 | select GENERIC_IRQ_PROBE |
55 | select GENERIC_IRQ_SHOW | |
7c07005e | 56 | select GENERIC_IRQ_SHOW_LEVEL |
b1b3f49c | 57 | select GENERIC_PCI_IOMAP |
38ff87f7 | 58 | select GENERIC_SCHED_CLOCK |
b1b3f49c RK |
59 | select GENERIC_SMP_IDLE_THREAD |
60 | select GENERIC_STRNCPY_FROM_USER | |
61 | select GENERIC_STRNLEN_USER | |
a71b092a | 62 | select HANDLE_DOMAIN_IRQ |
b1b3f49c | 63 | select HARDIRQS_SW_RESEND |
f00790aa | 64 | select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT |
0b7857db | 65 | select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 |
437682ee AB |
66 | select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU |
67 | select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU | |
e0c25d95 | 68 | select HAVE_ARCH_MMAP_RND_BITS if MMU |
f00790aa | 69 | select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT |
08626a60 | 70 | select HAVE_ARCH_THREAD_STRUCT_WHITELIST |
0693bf68 | 71 | select HAVE_ARCH_TRACEHOOK |
b329f95d | 72 | select HAVE_ARM_SMCCC if CPU_V7 |
39c13c20 | 73 | select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32 |
171b3f0d | 74 | select HAVE_CONTEXT_TRACKING |
b1b3f49c RK |
75 | select HAVE_C_RECORDMCOUNT |
76 | select HAVE_DEBUG_KMEMLEAK | |
b1b3f49c | 77 | select HAVE_DMA_CONTIGUOUS if MMU |
f00790aa | 78 | select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU |
620176f3 | 79 | select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE |
dce5c9e3 | 80 | select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU |
5f56a5df | 81 | select HAVE_EXIT_THREAD |
67a929e0 | 82 | select HAVE_FAST_GUP if ARM_LPAE |
f00790aa | 83 | select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL |
50362162 | 84 | select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG |
b0fe66cf | 85 | select HAVE_FUNCTION_TRACER if !XIP_KERNEL && (CC_IS_GCC || CLANG_VERSION >= 100000) |
6b90bd4b | 86 | select HAVE_GCC_PLUGINS |
f00790aa | 87 | select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7) |
b1b3f49c | 88 | select HAVE_IDE if PCI || ISA || PCMCIA |
87c46b6c | 89 | select HAVE_IRQ_TIME_ACCOUNTING |
e7db7b42 | 90 | select HAVE_KERNEL_GZIP |
f9b493ac | 91 | select HAVE_KERNEL_LZ4 |
6e8699f7 | 92 | select HAVE_KERNEL_LZMA |
b1b3f49c | 93 | select HAVE_KERNEL_LZO |
a7f464f3 | 94 | select HAVE_KERNEL_XZ |
cb1293e2 | 95 | select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M |
f00790aa | 96 | select HAVE_KRETPROBES if HAVE_KPROBES |
7d485f64 | 97 | select HAVE_MOD_ARCH_SPECIFIC |
42a0bb3f | 98 | select HAVE_NMI |
f00790aa | 99 | select HAVE_OPROFILE if HAVE_PERF_EVENTS |
0dc016db | 100 | select HAVE_OPTPROBES if !THUMB2_KERNEL |
7ada189f | 101 | select HAVE_PERF_EVENTS |
49863894 WD |
102 | select HAVE_PERF_REGS |
103 | select HAVE_PERF_USER_STACK_DUMP | |
f00790aa | 104 | select HAVE_RCU_TABLE_FREE if SMP && ARM_LPAE |
e513f8bf | 105 | select HAVE_REGS_AND_STACK_ACCESS_API |
9800b9dc | 106 | select HAVE_RSEQ |
d148eac0 | 107 | select HAVE_STACKPROTECTOR |
b1b3f49c | 108 | select HAVE_SYSCALL_TRACEPOINTS |
af1839eb | 109 | select HAVE_UID16 |
31c1fc81 | 110 | select HAVE_VIRT_CPU_ACCOUNTING_GEN |
da0ec6f7 | 111 | select IRQ_FORCED_THREADING |
171b3f0d | 112 | select MODULES_USE_ELF_REL |
f616ab59 | 113 | select NEED_DMA_MAP_STATE |
aa7d5f18 | 114 | select OF_EARLY_FLATTREE if OF |
171b3f0d RK |
115 | select OLD_SIGACTION |
116 | select OLD_SIGSUSPEND3 | |
20f1b79d | 117 | select PCI_SYSCALL if PCI |
b1b3f49c RK |
118 | select PERF_USE_VMALLOC |
119 | select RTC_LIB | |
120 | select SYS_SUPPORTS_APM_EMULATION | |
171b3f0d RK |
121 | # Above selects are sorted alphabetically; please add new ones |
122 | # according to that. Thanks. | |
1da177e4 LT |
123 | help |
124 | The ARM series is a line of low-power-consumption RISC chip designs | |
f6c8965a | 125 | licensed by ARM Ltd and targeted at embedded applications and |
1da177e4 | 126 | handhelds such as the Compaq IPAQ. ARM-based PCs are no longer |
f6c8965a | 127 | manufactured, but legacy ARM-based PC hardware remains popular in |
1da177e4 LT |
128 | Europe. There is an ARM Linux project with a web page at |
129 | <http://www.arm.linux.org.uk/>. | |
130 | ||
74facffe RK |
131 | config ARM_HAS_SG_CHAIN |
132 | bool | |
133 | ||
4ce63fcd | 134 | config ARM_DMA_USE_IOMMU |
4ce63fcd | 135 | bool |
b1b3f49c RK |
136 | select ARM_HAS_SG_CHAIN |
137 | select NEED_SG_DMA_LENGTH | |
4ce63fcd | 138 | |
60460abf SWK |
139 | if ARM_DMA_USE_IOMMU |
140 | ||
141 | config ARM_DMA_IOMMU_ALIGNMENT | |
142 | int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers" | |
143 | range 4 9 | |
144 | default 8 | |
145 | help | |
146 | DMA mapping framework by default aligns all buffers to the smallest | |
147 | PAGE_SIZE order which is greater than or equal to the requested buffer | |
148 | size. This works well for buffers up to a few hundreds kilobytes, but | |
149 | for larger buffers it just a waste of address space. Drivers which has | |
150 | relatively small addressing window (like 64Mib) might run out of | |
151 | virtual space with just a few allocations. | |
152 | ||
153 | With this parameter you can specify the maximum PAGE_SIZE order for | |
154 | DMA IOMMU buffers. Larger buffers will be aligned only to this | |
155 | specified order. The order is expressed as a power of two multiplied | |
156 | by the PAGE_SIZE. | |
157 | ||
158 | endif | |
159 | ||
75e7153a RB |
160 | config SYS_SUPPORTS_APM_EMULATION |
161 | bool | |
162 | ||
bc581770 LW |
163 | config HAVE_TCM |
164 | bool | |
165 | select GENERIC_ALLOCATOR | |
166 | ||
e119bfff RK |
167 | config HAVE_PROC_CPU |
168 | bool | |
169 | ||
ce816fa8 | 170 | config NO_IOPORT_MAP |
5ea81769 | 171 | bool |
5ea81769 | 172 | |
1da177e4 LT |
173 | config SBUS |
174 | bool | |
175 | ||
f16fb1ec RK |
176 | config STACKTRACE_SUPPORT |
177 | bool | |
178 | default y | |
179 | ||
180 | config LOCKDEP_SUPPORT | |
181 | bool | |
182 | default y | |
183 | ||
7ad1bcb2 RK |
184 | config TRACE_IRQFLAGS_SUPPORT |
185 | bool | |
cb1293e2 | 186 | default !CPU_V7M |
7ad1bcb2 | 187 | |
f0d1b0b3 DH |
188 | config ARCH_HAS_ILOG2_U32 |
189 | bool | |
f0d1b0b3 DH |
190 | |
191 | config ARCH_HAS_ILOG2_U64 | |
192 | bool | |
f0d1b0b3 | 193 | |
4a1b5733 EV |
194 | config ARCH_HAS_BANDGAP |
195 | bool | |
196 | ||
a5f4c561 SA |
197 | config FIX_EARLYCON_MEM |
198 | def_bool y if MMU | |
199 | ||
b89c3b16 AM |
200 | config GENERIC_HWEIGHT |
201 | bool | |
202 | default y | |
203 | ||
1da177e4 LT |
204 | config GENERIC_CALIBRATE_DELAY |
205 | bool | |
206 | default y | |
207 | ||
a08b6b79 AV |
208 | config ARCH_MAY_HAVE_PC_FDC |
209 | bool | |
210 | ||
5ac6da66 CL |
211 | config ZONE_DMA |
212 | bool | |
5ac6da66 | 213 | |
c7edc9e3 DL |
214 | config ARCH_SUPPORTS_UPROBES |
215 | def_bool y | |
216 | ||
58af4a24 RH |
217 | config ARCH_HAS_DMA_SET_COHERENT_MASK |
218 | bool | |
219 | ||
1da177e4 LT |
220 | config GENERIC_ISA_DMA |
221 | bool | |
222 | ||
1da177e4 LT |
223 | config FIQ |
224 | bool | |
225 | ||
13a5045d RH |
226 | config NEED_RET_TO_USER |
227 | bool | |
228 | ||
034d2f5a AV |
229 | config ARCH_MTD_XIP |
230 | bool | |
231 | ||
dc21af99 | 232 | config ARM_PATCH_PHYS_VIRT |
c1becedc RK |
233 | bool "Patch physical to virtual translations at runtime" if EMBEDDED |
234 | default y | |
b511d75d | 235 | depends on !XIP_KERNEL && MMU |
dc21af99 | 236 | help |
111e9a5c RK |
237 | Patch phys-to-virt and virt-to-phys translation functions at |
238 | boot and module load time according to the position of the | |
239 | kernel in system memory. | |
dc21af99 | 240 | |
111e9a5c | 241 | This can only be used with non-XIP MMU kernels where the base |
daece596 | 242 | of physical memory is at a 16MB boundary. |
dc21af99 | 243 | |
c1becedc RK |
244 | Only disable this option if you know that you do not require |
245 | this feature (eg, building a kernel for a single machine) and | |
246 | you need to shrink the kernel to the minimal size. | |
dc21af99 | 247 | |
c334bc15 RH |
248 | config NEED_MACH_IO_H |
249 | bool | |
250 | help | |
251 | Select this when mach/io.h is required to provide special | |
252 | definitions for this platform. The need for mach/io.h should | |
253 | be avoided when possible. | |
254 | ||
0cdc8b92 | 255 | config NEED_MACH_MEMORY_H |
1b9f95f8 NP |
256 | bool |
257 | help | |
0cdc8b92 NP |
258 | Select this when mach/memory.h is required to provide special |
259 | definitions for this platform. The need for mach/memory.h should | |
260 | be avoided when possible. | |
dc21af99 | 261 | |
1b9f95f8 | 262 | config PHYS_OFFSET |
974c0724 | 263 | hex "Physical address of main memory" if MMU |
c6f54a9b | 264 | depends on !ARM_PATCH_PHYS_VIRT |
974c0724 | 265 | default DRAM_BASE if !MMU |
c6f54a9b | 266 | default 0x00000000 if ARCH_EBSA110 || \ |
c6f54a9b UKK |
267 | ARCH_FOOTBRIDGE || \ |
268 | ARCH_INTEGRATOR || \ | |
8f2c0062 | 269 | ARCH_REALVIEW |
c6f54a9b UKK |
270 | default 0x10000000 if ARCH_OMAP1 || ARCH_RPC |
271 | default 0x20000000 if ARCH_S5PV210 | |
b8824c9a | 272 | default 0xc0000000 if ARCH_SA1100 |
111e9a5c | 273 | help |
1b9f95f8 NP |
274 | Please provide the physical address corresponding to the |
275 | location of main memory in your system. | |
cada3c08 | 276 | |
87e040b6 SG |
277 | config GENERIC_BUG |
278 | def_bool y | |
279 | depends on BUG | |
280 | ||
1bcad26e KS |
281 | config PGTABLE_LEVELS |
282 | int | |
283 | default 3 if ARM_LPAE | |
284 | default 2 | |
285 | ||
1da177e4 LT |
286 | menu "System Type" |
287 | ||
3c427975 HC |
288 | config MMU |
289 | bool "MMU-based Paged Memory Management Support" | |
290 | default y | |
291 | help | |
292 | Select if you want MMU-based virtualised addressing space | |
293 | support by paged memory management. If unsure, say 'Y'. | |
294 | ||
e0c25d95 DC |
295 | config ARCH_MMAP_RND_BITS_MIN |
296 | default 8 | |
297 | ||
298 | config ARCH_MMAP_RND_BITS_MAX | |
299 | default 14 if PAGE_OFFSET=0x40000000 | |
300 | default 15 if PAGE_OFFSET=0x80000000 | |
301 | default 16 | |
302 | ||
ccf50e23 RK |
303 | # |
304 | # The "ARM system type" choice list is ordered alphabetically by option | |
305 | # text. Please add new entries in the option alphabetic order. | |
306 | # | |
1da177e4 LT |
307 | choice |
308 | prompt "ARM system type" | |
70722803 | 309 | default ARM_SINGLE_ARMV7M if !MMU |
1420b22b | 310 | default ARCH_MULTIPLATFORM if MMU |
1da177e4 | 311 | |
387798b3 RH |
312 | config ARCH_MULTIPLATFORM |
313 | bool "Allow multiple platforms to be selected" | |
b1b3f49c | 314 | depends on MMU |
42dc836d | 315 | select ARM_HAS_SG_CHAIN |
387798b3 RH |
316 | select ARM_PATCH_PHYS_VIRT |
317 | select AUTO_ZRELADDR | |
bb0eb050 | 318 | select TIMER_OF |
66314223 | 319 | select COMMON_CLK |
ddb902cc | 320 | select GENERIC_CLOCKEVENTS |
4c301f9b | 321 | select GENERIC_IRQ_MULTI_HANDLER |
eb01d42a | 322 | select HAVE_PCI |
2eac9c2d | 323 | select PCI_DOMAINS_GENERIC if PCI |
66314223 DN |
324 | select SPARSE_IRQ |
325 | select USE_OF | |
66314223 | 326 | |
9c77bc43 SA |
327 | config ARM_SINGLE_ARMV7M |
328 | bool "ARMv7-M based platforms (Cortex-M0/M3/M4)" | |
329 | depends on !MMU | |
9c77bc43 | 330 | select ARM_NVIC |
499f1640 | 331 | select AUTO_ZRELADDR |
bb0eb050 | 332 | select TIMER_OF |
9c77bc43 SA |
333 | select COMMON_CLK |
334 | select CPU_V7M | |
335 | select GENERIC_CLOCKEVENTS | |
336 | select NO_IOPORT_MAP | |
337 | select SPARSE_IRQ | |
338 | select USE_OF | |
339 | ||
1da177e4 LT |
340 | config ARCH_EBSA110 |
341 | bool "EBSA-110" | |
b1b3f49c | 342 | select ARCH_USES_GETTIMEOFFSET |
c750815e | 343 | select CPU_SA110 |
f7e68bbf | 344 | select ISA |
c334bc15 | 345 | select NEED_MACH_IO_H |
0cdc8b92 | 346 | select NEED_MACH_MEMORY_H |
ce816fa8 | 347 | select NO_IOPORT_MAP |
1da177e4 LT |
348 | help |
349 | This is an evaluation board for the StrongARM processor available | |
f6c8965a | 350 | from Digital. It has limited hardware on-board, including an |
1da177e4 LT |
351 | Ethernet interface, two PCMCIA sockets, two serial ports and a |
352 | parallel port. | |
353 | ||
e7736d47 LB |
354 | config ARCH_EP93XX |
355 | bool "EP93xx-based" | |
80320927 | 356 | select ARCH_SPARSEMEM_ENABLE |
e7736d47 | 357 | select ARM_AMBA |
cd5bad41 | 358 | imply ARM_PATCH_PHYS_VIRT |
e7736d47 | 359 | select ARM_VIC |
b8824c9a | 360 | select AUTO_ZRELADDR |
6d803ba7 | 361 | select CLKDEV_LOOKUP |
000bc178 | 362 | select CLKSRC_MMIO |
b1b3f49c | 363 | select CPU_ARM920T |
000bc178 | 364 | select GENERIC_CLOCKEVENTS |
5c34a4e8 | 365 | select GPIOLIB |
e7736d47 LB |
366 | help |
367 | This enables support for the Cirrus EP93xx series of CPUs. | |
368 | ||
1da177e4 LT |
369 | config ARCH_FOOTBRIDGE |
370 | bool "FootBridge" | |
c750815e | 371 | select CPU_SA110 |
1da177e4 | 372 | select FOOTBRIDGE |
4e8d7637 | 373 | select GENERIC_CLOCKEVENTS |
d0ee9f40 | 374 | select HAVE_IDE |
8ef6e620 | 375 | select NEED_MACH_IO_H if !MMU |
0cdc8b92 | 376 | select NEED_MACH_MEMORY_H |
f999b8bd MM |
377 | help |
378 | Support for systems based on the DC21285 companion chip | |
379 | ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. | |
1da177e4 | 380 | |
3f7e5815 LB |
381 | config ARCH_IOP32X |
382 | bool "IOP32x-based" | |
a4f7e763 | 383 | depends on MMU |
c750815e | 384 | select CPU_XSCALE |
e9004f50 | 385 | select GPIO_IOP |
5c34a4e8 | 386 | select GPIOLIB |
13a5045d | 387 | select NEED_RET_TO_USER |
eb01d42a | 388 | select FORCE_PCI |
b1b3f49c | 389 | select PLAT_IOP |
f999b8bd | 390 | help |
3f7e5815 LB |
391 | Support for Intel's 80219 and IOP32X (XScale) family of |
392 | processors. | |
393 | ||
3b938be6 RK |
394 | config ARCH_IXP4XX |
395 | bool "IXP4xx-based" | |
a4f7e763 | 396 | depends on MMU |
58af4a24 | 397 | select ARCH_HAS_DMA_SET_COHERENT_MASK |
51aaf81f | 398 | select ARCH_SUPPORTS_BIG_ENDIAN |
c750815e | 399 | select CPU_XSCALE |
b1b3f49c | 400 | select DMABOUNCE if PCI |
3b938be6 | 401 | select GENERIC_CLOCKEVENTS |
98ac0cc2 | 402 | select GENERIC_IRQ_MULTI_HANDLER |
55ec465e | 403 | select GPIO_IXP4XX |
5c34a4e8 | 404 | select GPIOLIB |
eb01d42a | 405 | select HAVE_PCI |
55ec465e | 406 | select IXP4XX_IRQ |
65af6667 | 407 | select IXP4XX_TIMER |
c334bc15 | 408 | select NEED_MACH_IO_H |
9296d94d | 409 | select USB_EHCI_BIG_ENDIAN_DESC |
171b3f0d | 410 | select USB_EHCI_BIG_ENDIAN_MMIO |
c4713074 | 411 | help |
3b938be6 | 412 | Support for Intel's IXP4XX (XScale) family of processors. |
c4713074 | 413 | |
edabd38e SB |
414 | config ARCH_DOVE |
415 | bool "Marvell Dove" | |
756b2531 | 416 | select CPU_PJ4 |
edabd38e | 417 | select GENERIC_CLOCKEVENTS |
4c301f9b | 418 | select GENERIC_IRQ_MULTI_HANDLER |
5c34a4e8 | 419 | select GPIOLIB |
eb01d42a | 420 | select HAVE_PCI |
171b3f0d | 421 | select MVEBU_MBUS |
9139acd1 SH |
422 | select PINCTRL |
423 | select PINCTRL_DOVE | |
abcda1dc | 424 | select PLAT_ORION_LEGACY |
0bd86961 | 425 | select SPARSE_IRQ |
c5d431e8 | 426 | select PM_GENERIC_DOMAINS if PM |
788c9700 | 427 | help |
edabd38e | 428 | Support for the Marvell Dove SoC 88AP510 |
788c9700 | 429 | |
1da177e4 | 430 | config ARCH_PXA |
2c8086a5 | 431 | bool "PXA2xx/PXA3xx-based" |
a4f7e763 | 432 | depends on MMU |
b1b3f49c | 433 | select ARCH_MTD_XIP |
b1b3f49c RK |
434 | select ARM_CPU_SUSPEND if PM |
435 | select AUTO_ZRELADDR | |
a1c0a6ad | 436 | select COMMON_CLK |
6d803ba7 | 437 | select CLKDEV_LOOKUP |
389d9b58 | 438 | select CLKSRC_PXA |
234b6ced | 439 | select CLKSRC_MMIO |
bb0eb050 | 440 | select TIMER_OF |
2f202861 | 441 | select CPU_XSCALE if !CPU_XSC3 |
981d0f39 | 442 | select GENERIC_CLOCKEVENTS |
4c301f9b | 443 | select GENERIC_IRQ_MULTI_HANDLER |
157d2644 | 444 | select GPIO_PXA |
5c34a4e8 | 445 | select GPIOLIB |
d0ee9f40 | 446 | select HAVE_IDE |
d6cf30ca | 447 | select IRQ_DOMAIN |
b1b3f49c RK |
448 | select PLAT_PXA |
449 | select SPARSE_IRQ | |
f999b8bd | 450 | help |
2c8086a5 | 451 | Support for Intel/Marvell's PXA2xx/PXA3xx processor line. |
1da177e4 LT |
452 | |
453 | config ARCH_RPC | |
454 | bool "RiscPC" | |
868e87cc | 455 | depends on MMU |
1da177e4 | 456 | select ARCH_ACORN |
a08b6b79 | 457 | select ARCH_MAY_HAVE_PC_FDC |
07f841b7 | 458 | select ARCH_SPARSEMEM_ENABLE |
0b40deee | 459 | select ARM_HAS_SG_CHAIN |
fa04e209 | 460 | select CPU_SA110 |
b1b3f49c | 461 | select FIQ |
d0ee9f40 | 462 | select HAVE_IDE |
b1b3f49c RK |
463 | select HAVE_PATA_PLATFORM |
464 | select ISA_DMA_API | |
c334bc15 | 465 | select NEED_MACH_IO_H |
0cdc8b92 | 466 | select NEED_MACH_MEMORY_H |
ce816fa8 | 467 | select NO_IOPORT_MAP |
1da177e4 LT |
468 | help |
469 | On the Acorn Risc-PC, Linux can support the internal IDE disk and | |
470 | CD-ROM interface, serial and parallel port, and the floppy drive. | |
471 | ||
472 | config ARCH_SA1100 | |
473 | bool "SA1100-based" | |
b1b3f49c | 474 | select ARCH_MTD_XIP |
b1b3f49c RK |
475 | select ARCH_SPARSEMEM_ENABLE |
476 | select CLKDEV_LOOKUP | |
477 | select CLKSRC_MMIO | |
389d9b58 | 478 | select CLKSRC_PXA |
bb0eb050 | 479 | select TIMER_OF if OF |
d6c82046 | 480 | select COMMON_CLK |
1937f5b9 | 481 | select CPU_FREQ |
b1b3f49c | 482 | select CPU_SA1100 |
3e238be2 | 483 | select GENERIC_CLOCKEVENTS |
4c301f9b | 484 | select GENERIC_IRQ_MULTI_HANDLER |
5c34a4e8 | 485 | select GPIOLIB |
d0ee9f40 | 486 | select HAVE_IDE |
1eca42b4 | 487 | select IRQ_DOMAIN |
b1b3f49c | 488 | select ISA |
0cdc8b92 | 489 | select NEED_MACH_MEMORY_H |
375dec92 | 490 | select SPARSE_IRQ |
f999b8bd MM |
491 | help |
492 | Support for StrongARM 11x0 based boards. | |
1da177e4 | 493 | |
b130d5c2 KK |
494 | config ARCH_S3C24XX |
495 | bool "Samsung S3C24XX SoCs" | |
335cce74 | 496 | select ATAGS |
b1b3f49c | 497 | select CLKDEV_LOOKUP |
4280506a | 498 | select CLKSRC_SAMSUNG_PWM |
7f78b6eb | 499 | select GENERIC_CLOCKEVENTS |
880cf071 | 500 | select GPIO_SAMSUNG |
5c34a4e8 | 501 | select GPIOLIB |
4c301f9b | 502 | select GENERIC_IRQ_MULTI_HANDLER |
20676c15 | 503 | select HAVE_S3C2410_I2C if I2C |
b130d5c2 | 504 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
b1b3f49c | 505 | select HAVE_S3C_RTC if RTC_CLASS |
c334bc15 | 506 | select NEED_MACH_IO_H |
cd8dc7ae | 507 | select SAMSUNG_ATAGS |
ea04d6b4 | 508 | select USE_OF |
1da177e4 | 509 | help |
b130d5c2 KK |
510 | Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 |
511 | and S3C2450 SoCs based systems, such as the Simtec Electronics BAST | |
512 | (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the | |
513 | Samsung SMDK2410 development board (and derivatives). | |
63b1f51b | 514 | |
a0694861 TL |
515 | config ARCH_OMAP1 |
516 | bool "TI OMAP1" | |
00a36698 | 517 | depends on MMU |
9af915da | 518 | select ARCH_HAS_HOLES_MEMORYMODEL |
a0694861 | 519 | select ARCH_OMAP |
b1b3f49c | 520 | select CLKDEV_LOOKUP |
d6e15d78 | 521 | select CLKSRC_MMIO |
b1b3f49c | 522 | select GENERIC_CLOCKEVENTS |
a0694861 | 523 | select GENERIC_IRQ_CHIP |
4c301f9b | 524 | select GENERIC_IRQ_MULTI_HANDLER |
5c34a4e8 | 525 | select GPIOLIB |
a0694861 TL |
526 | select HAVE_IDE |
527 | select IRQ_DOMAIN | |
528 | select NEED_MACH_IO_H if PCCARD | |
529 | select NEED_MACH_MEMORY_H | |
685e2d08 | 530 | select SPARSE_IRQ |
21f47fbc | 531 | help |
a0694861 | 532 | Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) |
02c981c0 | 533 | |
1da177e4 LT |
534 | endchoice |
535 | ||
387798b3 RH |
536 | menu "Multiple platform selection" |
537 | depends on ARCH_MULTIPLATFORM | |
538 | ||
539 | comment "CPU Core family selection" | |
540 | ||
f8afae40 AB |
541 | config ARCH_MULTI_V4 |
542 | bool "ARMv4 based platforms (FA526)" | |
543 | depends on !ARCH_MULTI_V6_V7 | |
544 | select ARCH_MULTI_V4_V5 | |
545 | select CPU_FA526 | |
546 | ||
387798b3 RH |
547 | config ARCH_MULTI_V4T |
548 | bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" | |
387798b3 | 549 | depends on !ARCH_MULTI_V6_V7 |
b1b3f49c | 550 | select ARCH_MULTI_V4_V5 |
24e860fb AB |
551 | select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \ |
552 | CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \ | |
553 | CPU_ARM925T || CPU_ARM940T) | |
387798b3 RH |
554 | |
555 | config ARCH_MULTI_V5 | |
556 | bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" | |
387798b3 | 557 | depends on !ARCH_MULTI_V6_V7 |
b1b3f49c | 558 | select ARCH_MULTI_V4_V5 |
12567bbd | 559 | select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \ |
24e860fb AB |
560 | CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \ |
561 | CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON) | |
387798b3 RH |
562 | |
563 | config ARCH_MULTI_V4_V5 | |
564 | bool | |
565 | ||
566 | config ARCH_MULTI_V6 | |
8dda05cc | 567 | bool "ARMv6 based platforms (ARM11)" |
387798b3 | 568 | select ARCH_MULTI_V6_V7 |
42f4754a | 569 | select CPU_V6K |
387798b3 RH |
570 | |
571 | config ARCH_MULTI_V7 | |
8dda05cc | 572 | bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" |
387798b3 RH |
573 | default y |
574 | select ARCH_MULTI_V6_V7 | |
b1b3f49c | 575 | select CPU_V7 |
90bc8ac7 | 576 | select HAVE_SMP |
387798b3 RH |
577 | |
578 | config ARCH_MULTI_V6_V7 | |
579 | bool | |
9352b05b | 580 | select MIGHT_HAVE_CACHE_L2X0 |
387798b3 RH |
581 | |
582 | config ARCH_MULTI_CPU_AUTO | |
583 | def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) | |
584 | select ARCH_MULTI_V5 | |
585 | ||
586 | endmenu | |
587 | ||
05e2a3de | 588 | config ARCH_VIRT |
e3246542 MY |
589 | bool "Dummy Virtual Machine" |
590 | depends on ARCH_MULTI_V7 | |
4b8b5f25 | 591 | select ARM_AMBA |
05e2a3de | 592 | select ARM_GIC |
3ee80364 | 593 | select ARM_GIC_V2M if PCI |
0b28f1db | 594 | select ARM_GIC_V3 |
bb29cecb | 595 | select ARM_GIC_V3_ITS if PCI |
05e2a3de | 596 | select ARM_PSCI |
4b8b5f25 | 597 | select HAVE_ARM_ARCH_TIMER |
8e2649d0 | 598 | select ARCH_SUPPORTS_BIG_ENDIAN |
05e2a3de | 599 | |
ccf50e23 RK |
600 | # |
601 | # This is sorted alphabetically by mach-* pathname. However, plat-* | |
602 | # Kconfigs may be included either alphabetically (according to the | |
603 | # plat- suffix) or along side the corresponding mach-* source. | |
604 | # | |
6bb8536c AF |
605 | source "arch/arm/mach-actions/Kconfig" |
606 | ||
445d9b30 TZ |
607 | source "arch/arm/mach-alpine/Kconfig" |
608 | ||
590b460c LP |
609 | source "arch/arm/mach-artpec/Kconfig" |
610 | ||
d9bfc86d OR |
611 | source "arch/arm/mach-asm9260/Kconfig" |
612 | ||
a66c51f9 AB |
613 | source "arch/arm/mach-aspeed/Kconfig" |
614 | ||
95b8f20f RK |
615 | source "arch/arm/mach-at91/Kconfig" |
616 | ||
1d22924e AB |
617 | source "arch/arm/mach-axxia/Kconfig" |
618 | ||
8ac49e04 CD |
619 | source "arch/arm/mach-bcm/Kconfig" |
620 | ||
1c37fa10 SH |
621 | source "arch/arm/mach-berlin/Kconfig" |
622 | ||
1da177e4 LT |
623 | source "arch/arm/mach-clps711x/Kconfig" |
624 | ||
d94f944e AV |
625 | source "arch/arm/mach-cns3xxx/Kconfig" |
626 | ||
95b8f20f RK |
627 | source "arch/arm/mach-davinci/Kconfig" |
628 | ||
df8d742e BS |
629 | source "arch/arm/mach-digicolor/Kconfig" |
630 | ||
95b8f20f RK |
631 | source "arch/arm/mach-dove/Kconfig" |
632 | ||
e7736d47 LB |
633 | source "arch/arm/mach-ep93xx/Kconfig" |
634 | ||
a66c51f9 AB |
635 | source "arch/arm/mach-exynos/Kconfig" |
636 | source "arch/arm/plat-samsung/Kconfig" | |
637 | ||
1da177e4 LT |
638 | source "arch/arm/mach-footbridge/Kconfig" |
639 | ||
59d3a193 PZ |
640 | source "arch/arm/mach-gemini/Kconfig" |
641 | ||
387798b3 RH |
642 | source "arch/arm/mach-highbank/Kconfig" |
643 | ||
389ee0c2 HZ |
644 | source "arch/arm/mach-hisi/Kconfig" |
645 | ||
a66c51f9 AB |
646 | source "arch/arm/mach-imx/Kconfig" |
647 | ||
1da177e4 LT |
648 | source "arch/arm/mach-integrator/Kconfig" |
649 | ||
3f7e5815 LB |
650 | source "arch/arm/mach-iop32x/Kconfig" |
651 | ||
1da177e4 LT |
652 | source "arch/arm/mach-ixp4xx/Kconfig" |
653 | ||
828989ad SS |
654 | source "arch/arm/mach-keystone/Kconfig" |
655 | ||
75bf1bd7 | 656 | source "arch/arm/mach-lpc32xx/Kconfig" |
95b8f20f | 657 | |
a66c51f9 AB |
658 | source "arch/arm/mach-mediatek/Kconfig" |
659 | ||
3b8f5030 CC |
660 | source "arch/arm/mach-meson/Kconfig" |
661 | ||
9fb29c73 ST |
662 | source "arch/arm/mach-milbeaut/Kconfig" |
663 | ||
a66c51f9 | 664 | source "arch/arm/mach-mmp/Kconfig" |
17723fd3 | 665 | |
a66c51f9 | 666 | source "arch/arm/mach-moxart/Kconfig" |
8c2ed9bc | 667 | |
794d15b2 SS |
668 | source "arch/arm/mach-mv78xx0/Kconfig" |
669 | ||
a66c51f9 | 670 | source "arch/arm/mach-mvebu/Kconfig" |
f682a218 | 671 | |
1d3f33d5 SG |
672 | source "arch/arm/mach-mxs/Kconfig" |
673 | ||
95b8f20f | 674 | source "arch/arm/mach-nomadik/Kconfig" |
95b8f20f | 675 | |
7bffa14c BH |
676 | source "arch/arm/mach-npcm/Kconfig" |
677 | ||
9851ca57 DT |
678 | source "arch/arm/mach-nspire/Kconfig" |
679 | ||
d48af15e TL |
680 | source "arch/arm/plat-omap/Kconfig" |
681 | ||
682 | source "arch/arm/mach-omap1/Kconfig" | |
1da177e4 | 683 | |
1dbae815 TL |
684 | source "arch/arm/mach-omap2/Kconfig" |
685 | ||
9dd0b194 | 686 | source "arch/arm/mach-orion5x/Kconfig" |
585cf175 | 687 | |
a66c51f9 AB |
688 | source "arch/arm/mach-oxnas/Kconfig" |
689 | ||
387798b3 RH |
690 | source "arch/arm/mach-picoxcell/Kconfig" |
691 | ||
a66c51f9 AB |
692 | source "arch/arm/mach-prima2/Kconfig" |
693 | ||
95b8f20f RK |
694 | source "arch/arm/mach-pxa/Kconfig" |
695 | source "arch/arm/plat-pxa/Kconfig" | |
585cf175 | 696 | |
8fc1b0f8 KG |
697 | source "arch/arm/mach-qcom/Kconfig" |
698 | ||
78e3dbc1 AF |
699 | source "arch/arm/mach-rda/Kconfig" |
700 | ||
95b8f20f RK |
701 | source "arch/arm/mach-realview/Kconfig" |
702 | ||
d63dc051 HS |
703 | source "arch/arm/mach-rockchip/Kconfig" |
704 | ||
a66c51f9 AB |
705 | source "arch/arm/mach-s3c24xx/Kconfig" |
706 | ||
707 | source "arch/arm/mach-s3c64xx/Kconfig" | |
708 | ||
709 | source "arch/arm/mach-s5pv210/Kconfig" | |
710 | ||
95b8f20f | 711 | source "arch/arm/mach-sa1100/Kconfig" |
edabd38e | 712 | |
a66c51f9 AB |
713 | source "arch/arm/mach-shmobile/Kconfig" |
714 | ||
387798b3 RH |
715 | source "arch/arm/mach-socfpga/Kconfig" |
716 | ||
a7ed099f | 717 | source "arch/arm/mach-spear/Kconfig" |
a21765a7 | 718 | |
65ebcc11 SK |
719 | source "arch/arm/mach-sti/Kconfig" |
720 | ||
bcb84fb4 AT |
721 | source "arch/arm/mach-stm32/Kconfig" |
722 | ||
3b52634f MR |
723 | source "arch/arm/mach-sunxi/Kconfig" |
724 | ||
d6de5b02 MG |
725 | source "arch/arm/mach-tango/Kconfig" |
726 | ||
c5f80065 EG |
727 | source "arch/arm/mach-tegra/Kconfig" |
728 | ||
95b8f20f | 729 | source "arch/arm/mach-u300/Kconfig" |
1da177e4 | 730 | |
ba56a987 MY |
731 | source "arch/arm/mach-uniphier/Kconfig" |
732 | ||
95b8f20f | 733 | source "arch/arm/mach-ux500/Kconfig" |
1da177e4 LT |
734 | |
735 | source "arch/arm/mach-versatile/Kconfig" | |
736 | ||
ceade897 | 737 | source "arch/arm/mach-vexpress/Kconfig" |
420c34e4 | 738 | source "arch/arm/plat-versatile/Kconfig" |
ceade897 | 739 | |
6f35f9a9 TP |
740 | source "arch/arm/mach-vt8500/Kconfig" |
741 | ||
acede515 JN |
742 | source "arch/arm/mach-zx/Kconfig" |
743 | ||
9a45eb69 JC |
744 | source "arch/arm/mach-zynq/Kconfig" |
745 | ||
499f1640 SA |
746 | # ARMv7-M architecture |
747 | config ARCH_EFM32 | |
748 | bool "Energy Micro efm32" | |
749 | depends on ARM_SINGLE_ARMV7M | |
5c34a4e8 | 750 | select GPIOLIB |
499f1640 SA |
751 | help |
752 | Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko | |
753 | processors. | |
754 | ||
755 | config ARCH_LPC18XX | |
756 | bool "NXP LPC18xx/LPC43xx" | |
757 | depends on ARM_SINGLE_ARMV7M | |
758 | select ARCH_HAS_RESET_CONTROLLER | |
759 | select ARM_AMBA | |
760 | select CLKSRC_LPC32XX | |
761 | select PINCTRL | |
762 | help | |
763 | Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4 | |
764 | high performance microcontrollers. | |
765 | ||
1847119d | 766 | config ARCH_MPS2 |
17bd274e | 767 | bool "ARM MPS2 platform" |
1847119d VM |
768 | depends on ARM_SINGLE_ARMV7M |
769 | select ARM_AMBA | |
770 | select CLKSRC_MPS2 | |
771 | help | |
772 | Support for Cortex-M Prototyping System (or V2M-MPS2) which comes | |
773 | with a range of available cores like Cortex-M3/M4/M7. | |
774 | ||
775 | Please, note that depends which Application Note is used memory map | |
776 | for the platform may vary, so adjustment of RAM base might be needed. | |
777 | ||
1da177e4 LT |
778 | # Definitions to make life easier |
779 | config ARCH_ACORN | |
780 | bool | |
781 | ||
7ae1f7ec LB |
782 | config PLAT_IOP |
783 | bool | |
469d3044 | 784 | select GENERIC_CLOCKEVENTS |
7ae1f7ec | 785 | |
69b02f6a LB |
786 | config PLAT_ORION |
787 | bool | |
bfe45e0b | 788 | select CLKSRC_MMIO |
b1b3f49c | 789 | select COMMON_CLK |
dc7ad3b3 | 790 | select GENERIC_IRQ_CHIP |
278b45b0 | 791 | select IRQ_DOMAIN |
69b02f6a | 792 | |
abcda1dc TP |
793 | config PLAT_ORION_LEGACY |
794 | bool | |
795 | select PLAT_ORION | |
796 | ||
bd5ce433 EM |
797 | config PLAT_PXA |
798 | bool | |
799 | ||
f4b8b319 RK |
800 | config PLAT_VERSATILE |
801 | bool | |
802 | ||
8636a1f9 | 803 | source "arch/arm/mm/Kconfig" |
1da177e4 | 804 | |
afe4b25e | 805 | config IWMMXT |
d93003e8 SH |
806 | bool "Enable iWMMXt support" |
807 | depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B | |
808 | default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B | |
afe4b25e LB |
809 | help |
810 | Enable support for iWMMXt context switching at run time if | |
811 | running on a CPU that supports it. | |
812 | ||
3b93e7b0 HC |
813 | if !MMU |
814 | source "arch/arm/Kconfig-nommu" | |
815 | endif | |
816 | ||
3e0a07f8 GC |
817 | config PJ4B_ERRATA_4742 |
818 | bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation" | |
819 | depends on CPU_PJ4B && MACH_ARMADA_370 | |
820 | default y | |
821 | help | |
822 | When coming out of either a Wait for Interrupt (WFI) or a Wait for | |
823 | Event (WFE) IDLE states, a specific timing sensitivity exists between | |
824 | the retiring WFI/WFE instructions and the newly issued subsequent | |
825 | instructions. This sensitivity can result in a CPU hang scenario. | |
826 | Workaround: | |
827 | The software must insert either a Data Synchronization Barrier (DSB) | |
828 | or Data Memory Barrier (DMB) command immediately after the WFI/WFE | |
829 | instruction | |
830 | ||
f0c4b8d6 WD |
831 | config ARM_ERRATA_326103 |
832 | bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" | |
833 | depends on CPU_V6 | |
834 | help | |
835 | Executing a SWP instruction to read-only memory does not set bit 11 | |
836 | of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to | |
837 | treat the access as a read, preventing a COW from occurring and | |
838 | causing the faulting task to livelock. | |
839 | ||
9cba3ccc CM |
840 | config ARM_ERRATA_411920 |
841 | bool "ARM errata: Invalidation of the Instruction Cache operation can fail" | |
e399b1a4 | 842 | depends on CPU_V6 || CPU_V6K |
9cba3ccc CM |
843 | help |
844 | Invalidation of the Instruction Cache operation can | |
845 | fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. | |
846 | It does not affect the MPCore. This option enables the ARM Ltd. | |
847 | recommended workaround. | |
848 | ||
7ce236fc CM |
849 | config ARM_ERRATA_430973 |
850 | bool "ARM errata: Stale prediction on replaced interworking branch" | |
851 | depends on CPU_V7 | |
852 | help | |
853 | This option enables the workaround for the 430973 Cortex-A8 | |
79403cda | 854 | r1p* erratum. If a code sequence containing an ARM/Thumb |
7ce236fc CM |
855 | interworking branch is replaced with another code sequence at the |
856 | same virtual address, whether due to self-modifying code or virtual | |
857 | to physical address re-mapping, Cortex-A8 does not recover from the | |
858 | stale interworking branch prediction. This results in Cortex-A8 | |
859 | executing the new code sequence in the incorrect ARM or Thumb state. | |
860 | The workaround enables the BTB/BTAC operations by setting ACTLR.IBE | |
861 | and also flushes the branch target cache at every context switch. | |
862 | Note that setting specific bits in the ACTLR register may not be | |
863 | available in non-secure mode. | |
864 | ||
855c551f CM |
865 | config ARM_ERRATA_458693 |
866 | bool "ARM errata: Processor deadlock when a false hazard is created" | |
867 | depends on CPU_V7 | |
62e4d357 | 868 | depends on !ARCH_MULTIPLATFORM |
855c551f CM |
869 | help |
870 | This option enables the workaround for the 458693 Cortex-A8 (r2p0) | |
871 | erratum. For very specific sequences of memory operations, it is | |
872 | possible for a hazard condition intended for a cache line to instead | |
873 | be incorrectly associated with a different cache line. This false | |
874 | hazard might then cause a processor deadlock. The workaround enables | |
875 | the L1 caching of the NEON accesses and disables the PLD instruction | |
876 | in the ACTLR register. Note that setting specific bits in the ACTLR | |
877 | register may not be available in non-secure mode. | |
878 | ||
0516e464 CM |
879 | config ARM_ERRATA_460075 |
880 | bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" | |
881 | depends on CPU_V7 | |
62e4d357 | 882 | depends on !ARCH_MULTIPLATFORM |
0516e464 CM |
883 | help |
884 | This option enables the workaround for the 460075 Cortex-A8 (r2p0) | |
885 | erratum. Any asynchronous access to the L2 cache may encounter a | |
886 | situation in which recent store transactions to the L2 cache are lost | |
887 | and overwritten with stale memory contents from external memory. The | |
888 | workaround disables the write-allocate mode for the L2 cache via the | |
889 | ACTLR register. Note that setting specific bits in the ACTLR register | |
890 | may not be available in non-secure mode. | |
891 | ||
9f05027c WD |
892 | config ARM_ERRATA_742230 |
893 | bool "ARM errata: DMB operation may be faulty" | |
894 | depends on CPU_V7 && SMP | |
62e4d357 | 895 | depends on !ARCH_MULTIPLATFORM |
9f05027c WD |
896 | help |
897 | This option enables the workaround for the 742230 Cortex-A9 | |
898 | (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction | |
899 | between two write operations may not ensure the correct visibility | |
900 | ordering of the two writes. This workaround sets a specific bit in | |
901 | the diagnostic register of the Cortex-A9 which causes the DMB | |
902 | instruction to behave as a DSB, ensuring the correct behaviour of | |
903 | the two writes. | |
904 | ||
a672e99b WD |
905 | config ARM_ERRATA_742231 |
906 | bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption" | |
907 | depends on CPU_V7 && SMP | |
62e4d357 | 908 | depends on !ARCH_MULTIPLATFORM |
a672e99b WD |
909 | help |
910 | This option enables the workaround for the 742231 Cortex-A9 | |
911 | (r2p0..r2p2) erratum. Under certain conditions, specific to the | |
912 | Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode, | |
913 | accessing some data located in the same cache line, may get corrupted | |
914 | data due to bad handling of the address hazard when the line gets | |
915 | replaced from one of the CPUs at the same time as another CPU is | |
916 | accessing it. This workaround sets specific bits in the diagnostic | |
917 | register of the Cortex-A9 which reduces the linefill issuing | |
918 | capabilities of the processor. | |
919 | ||
69155794 JM |
920 | config ARM_ERRATA_643719 |
921 | bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" | |
922 | depends on CPU_V7 && SMP | |
e5a5de44 | 923 | default y |
69155794 JM |
924 | help |
925 | This option enables the workaround for the 643719 Cortex-A9 (prior to | |
926 | r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR | |
927 | register returns zero when it should return one. The workaround | |
928 | corrects this value, ensuring cache maintenance operations which use | |
929 | it behave as intended and avoiding data corruption. | |
930 | ||
cdf357f1 WD |
931 | config ARM_ERRATA_720789 |
932 | bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" | |
e66dc745 | 933 | depends on CPU_V7 |
cdf357f1 WD |
934 | help |
935 | This option enables the workaround for the 720789 Cortex-A9 (prior to | |
936 | r2p0) erratum. A faulty ASID can be sent to the other CPUs for the | |
937 | broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS. | |
938 | As a consequence of this erratum, some TLB entries which should be | |
939 | invalidated are not, resulting in an incoherency in the system page | |
940 | tables. The workaround changes the TLB flushing routines to invalidate | |
941 | entries regardless of the ASID. | |
475d92fc WD |
942 | |
943 | config ARM_ERRATA_743622 | |
944 | bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" | |
945 | depends on CPU_V7 | |
62e4d357 | 946 | depends on !ARCH_MULTIPLATFORM |
475d92fc WD |
947 | help |
948 | This option enables the workaround for the 743622 Cortex-A9 | |
efbc74ac | 949 | (r2p*) erratum. Under very rare conditions, a faulty |
475d92fc WD |
950 | optimisation in the Cortex-A9 Store Buffer may lead to data |
951 | corruption. This workaround sets a specific bit in the diagnostic | |
952 | register of the Cortex-A9 which disables the Store Buffer | |
953 | optimisation, preventing the defect from occurring. This has no | |
954 | visible impact on the overall performance or power consumption of the | |
955 | processor. | |
956 | ||
9a27c27c WD |
957 | config ARM_ERRATA_751472 |
958 | bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" | |
ba90c516 | 959 | depends on CPU_V7 |
62e4d357 | 960 | depends on !ARCH_MULTIPLATFORM |
9a27c27c WD |
961 | help |
962 | This option enables the workaround for the 751472 Cortex-A9 (prior | |
963 | to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the | |
964 | completion of a following broadcasted operation if the second | |
965 | operation is received by a CPU before the ICIALLUIS has completed, | |
966 | potentially leading to corrupted entries in the cache or TLB. | |
967 | ||
fcbdc5fe WD |
968 | config ARM_ERRATA_754322 |
969 | bool "ARM errata: possible faulty MMU translations following an ASID switch" | |
970 | depends on CPU_V7 | |
971 | help | |
972 | This option enables the workaround for the 754322 Cortex-A9 (r2p*, | |
973 | r3p*) erratum. A speculative memory access may cause a page table walk | |
974 | which starts prior to an ASID switch but completes afterwards. This | |
975 | can populate the micro-TLB with a stale entry which may be hit with | |
976 | the new ASID. This workaround places two dsb instructions in the mm | |
977 | switching code so that no page table walks can cross the ASID switch. | |
978 | ||
5dab26af WD |
979 | config ARM_ERRATA_754327 |
980 | bool "ARM errata: no automatic Store Buffer drain" | |
981 | depends on CPU_V7 && SMP | |
982 | help | |
983 | This option enables the workaround for the 754327 Cortex-A9 (prior to | |
984 | r2p0) erratum. The Store Buffer does not have any automatic draining | |
985 | mechanism and therefore a livelock may occur if an external agent | |
986 | continuously polls a memory location waiting to observe an update. | |
987 | This workaround defines cpu_relax() as smp_mb(), preventing correctly | |
988 | written polling loops from denying visibility of updates to memory. | |
989 | ||
145e10e1 CM |
990 | config ARM_ERRATA_364296 |
991 | bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" | |
fd832478 | 992 | depends on CPU_V6 |
145e10e1 CM |
993 | help |
994 | This options enables the workaround for the 364296 ARM1136 | |
995 | r0p2 erratum (possible cache data corruption with | |
996 | hit-under-miss enabled). It sets the undocumented bit 31 in | |
997 | the auxiliary control register and the FI bit in the control | |
998 | register, thus disabling hit-under-miss without putting the | |
999 | processor into full low interrupt latency mode. ARM11MPCore | |
1000 | is not affected. | |
1001 | ||
f630c1bd WD |
1002 | config ARM_ERRATA_764369 |
1003 | bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" | |
1004 | depends on CPU_V7 && SMP | |
1005 | help | |
1006 | This option enables the workaround for erratum 764369 | |
1007 | affecting Cortex-A9 MPCore with two or more processors (all | |
1008 | current revisions). Under certain timing circumstances, a data | |
1009 | cache line maintenance operation by MVA targeting an Inner | |
1010 | Shareable memory region may fail to proceed up to either the | |
1011 | Point of Coherency or to the Point of Unification of the | |
1012 | system. This workaround adds a DSB instruction before the | |
1013 | relevant cache maintenance functions and sets a specific bit | |
1014 | in the diagnostic control register of the SCU. | |
1015 | ||
7253b85c SH |
1016 | config ARM_ERRATA_775420 |
1017 | bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" | |
1018 | depends on CPU_V7 | |
1019 | help | |
1020 | This option enables the workaround for the 775420 Cortex-A9 (r2p2, | |
cb73737e | 1021 | r2p6,r2p8,r2p10,r3p0) erratum. In case a data cache maintenance |
7253b85c SH |
1022 | operation aborts with MMU exception, it might cause the processor |
1023 | to deadlock. This workaround puts DSB before executing ISB if | |
1024 | an abort may occur on cache maintenance. | |
1025 | ||
93dc6887 CM |
1026 | config ARM_ERRATA_798181 |
1027 | bool "ARM errata: TLBI/DSB failure on Cortex-A15" | |
1028 | depends on CPU_V7 && SMP | |
1029 | help | |
1030 | On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not | |
1031 | adequately shooting down all use of the old entries. This | |
1032 | option enables the Linux kernel workaround for this erratum | |
1033 | which sends an IPI to the CPUs that are running the same ASID | |
1034 | as the one being invalidated. | |
1035 | ||
84b6504f WD |
1036 | config ARM_ERRATA_773022 |
1037 | bool "ARM errata: incorrect instructions may be executed from loop buffer" | |
1038 | depends on CPU_V7 | |
1039 | help | |
1040 | This option enables the workaround for the 773022 Cortex-A15 | |
1041 | (up to r0p4) erratum. In certain rare sequences of code, the | |
1042 | loop buffer may deliver incorrect instructions. This | |
1043 | workaround disables the loop buffer to avoid the erratum. | |
1044 | ||
62c0f4a5 DA |
1045 | config ARM_ERRATA_818325_852422 |
1046 | bool "ARM errata: A12: some seqs of opposed cond code instrs => deadlock or corruption" | |
1047 | depends on CPU_V7 | |
1048 | help | |
1049 | This option enables the workaround for: | |
1050 | - Cortex-A12 818325: Execution of an UNPREDICTABLE STR or STM | |
1051 | instruction might deadlock. Fixed in r0p1. | |
1052 | - Cortex-A12 852422: Execution of a sequence of instructions might | |
1053 | lead to either a data corruption or a CPU deadlock. Not fixed in | |
1054 | any Cortex-A12 cores yet. | |
1055 | This workaround for all both errata involves setting bit[12] of the | |
1056 | Feature Register. This bit disables an optimisation applied to a | |
1057 | sequence of 2 instructions that use opposing condition codes. | |
1058 | ||
416bcf21 DA |
1059 | config ARM_ERRATA_821420 |
1060 | bool "ARM errata: A12: sequence of VMOV to core registers might lead to a dead lock" | |
1061 | depends on CPU_V7 | |
1062 | help | |
1063 | This option enables the workaround for the 821420 Cortex-A12 | |
1064 | (all revs) erratum. In very rare timing conditions, a sequence | |
1065 | of VMOV to Core registers instructions, for which the second | |
1066 | one is in the shadow of a branch or abort, can lead to a | |
1067 | deadlock when the VMOV instructions are issued out-of-order. | |
1068 | ||
9f6f9354 DA |
1069 | config ARM_ERRATA_825619 |
1070 | bool "ARM errata: A12: DMB NSHST/ISHST mixed ... might cause deadlock" | |
1071 | depends on CPU_V7 | |
1072 | help | |
1073 | This option enables the workaround for the 825619 Cortex-A12 | |
1074 | (all revs) erratum. Within rare timing constraints, executing a | |
1075 | DMB NSHST or DMB ISHST instruction followed by a mix of Cacheable | |
1076 | and Device/Strongly-Ordered loads and stores might cause deadlock | |
1077 | ||
304009a1 DA |
1078 | config ARM_ERRATA_857271 |
1079 | bool "ARM errata: A12: CPU might deadlock under some very rare internal conditions" | |
1080 | depends on CPU_V7 | |
1081 | help | |
1082 | This option enables the workaround for the 857271 Cortex-A12 | |
1083 | (all revs) erratum. Under very rare timing conditions, the CPU might | |
1084 | hang. The workaround is expected to have a < 1% performance impact. | |
1085 | ||
9f6f9354 DA |
1086 | config ARM_ERRATA_852421 |
1087 | bool "ARM errata: A17: DMB ST might fail to create order between stores" | |
1088 | depends on CPU_V7 | |
1089 | help | |
1090 | This option enables the workaround for the 852421 Cortex-A17 | |
1091 | (r1p0, r1p1, r1p2) erratum. Under very rare timing conditions, | |
1092 | execution of a DMB ST instruction might fail to properly order | |
1093 | stores from GroupA and stores from GroupB. | |
1094 | ||
62c0f4a5 DA |
1095 | config ARM_ERRATA_852423 |
1096 | bool "ARM errata: A17: some seqs of opposed cond code instrs => deadlock or corruption" | |
1097 | depends on CPU_V7 | |
1098 | help | |
1099 | This option enables the workaround for: | |
1100 | - Cortex-A17 852423: Execution of a sequence of instructions might | |
1101 | lead to either a data corruption or a CPU deadlock. Not fixed in | |
1102 | any Cortex-A17 cores yet. | |
1103 | This is identical to Cortex-A12 erratum 852422. It is a separate | |
1104 | config option from the A12 erratum due to the way errata are checked | |
1105 | for and handled. | |
1106 | ||
304009a1 DA |
1107 | config ARM_ERRATA_857272 |
1108 | bool "ARM errata: A17: CPU might deadlock under some very rare internal conditions" | |
1109 | depends on CPU_V7 | |
1110 | help | |
1111 | This option enables the workaround for the 857272 Cortex-A17 erratum. | |
1112 | This erratum is not known to be fixed in any A17 revision. | |
1113 | This is identical to Cortex-A12 erratum 857271. It is a separate | |
1114 | config option from the A12 erratum due to the way errata are checked | |
1115 | for and handled. | |
1116 | ||
1da177e4 LT |
1117 | endmenu |
1118 | ||
1119 | source "arch/arm/common/Kconfig" | |
1120 | ||
1da177e4 LT |
1121 | menu "Bus support" |
1122 | ||
1da177e4 LT |
1123 | config ISA |
1124 | bool | |
1da177e4 LT |
1125 | help |
1126 | Find out whether you have ISA slots on your motherboard. ISA is the | |
1127 | name of a bus system, i.e. the way the CPU talks to the other stuff | |
1128 | inside your box. Other bus systems are PCI, EISA, MicroChannel | |
1129 | (MCA) or VESA. ISA is an older system, now being displaced by PCI; | |
1130 | newer boards don't support it. If you have ISA, say Y, otherwise N. | |
1131 | ||
065909b9 | 1132 | # Select ISA DMA controller support |
1da177e4 LT |
1133 | config ISA_DMA |
1134 | bool | |
065909b9 | 1135 | select ISA_DMA_API |
1da177e4 | 1136 | |
065909b9 | 1137 | # Select ISA DMA interface |
5cae841b AV |
1138 | config ISA_DMA_API |
1139 | bool | |
5cae841b | 1140 | |
b080ac8a MRJ |
1141 | config PCI_NANOENGINE |
1142 | bool "BSE nanoEngine PCI support" | |
1143 | depends on SA1100_NANOENGINE | |
1144 | help | |
1145 | Enable PCI on the BSE nanoEngine board. | |
1146 | ||
a0113a99 MR |
1147 | config PCI_HOST_ITE8152 |
1148 | bool | |
1149 | depends on PCI && MACH_ARMCORE | |
1150 | default y | |
1151 | select DMABOUNCE | |
1152 | ||
779eb41c BG |
1153 | config ARM_ERRATA_814220 |
1154 | bool "ARM errata: Cache maintenance by set/way operations can execute out of order" | |
1155 | depends on CPU_V7 | |
1156 | help | |
1157 | The v7 ARM states that all cache and branch predictor maintenance | |
1158 | operations that do not specify an address execute, relative to | |
1159 | each other, in program order. | |
1160 | However, because of this erratum, an L2 set/way cache maintenance | |
1161 | operation can overtake an L1 set/way cache maintenance operation. | |
1162 | This ERRATA only affected the Cortex-A7 and present in r0p2, r0p3, | |
1163 | r0p4, r0p5. | |
1164 | ||
1da177e4 LT |
1165 | endmenu |
1166 | ||
1167 | menu "Kernel Features" | |
1168 | ||
3b55658a DM |
1169 | config HAVE_SMP |
1170 | bool | |
1171 | help | |
1172 | This option should be selected by machines which have an SMP- | |
1173 | capable CPU. | |
1174 | ||
1175 | The only effect of this option is to make the SMP-related | |
1176 | options available to the user for configuration. | |
1177 | ||
1da177e4 | 1178 | config SMP |
bb2d8130 | 1179 | bool "Symmetric Multi-Processing" |
fbb4ddac | 1180 | depends on CPU_V6K || CPU_V7 |
bc28248e | 1181 | depends on GENERIC_CLOCKEVENTS |
3b55658a | 1182 | depends on HAVE_SMP |
801bb21c | 1183 | depends on MMU || ARM_MPU |
0361748f | 1184 | select IRQ_WORK |
1da177e4 LT |
1185 | help |
1186 | This enables support for systems with more than one CPU. If you have | |
4a474157 RG |
1187 | a system with only one CPU, say N. If you have a system with more |
1188 | than one CPU, say Y. | |
1da177e4 | 1189 | |
4a474157 | 1190 | If you say N here, the kernel will run on uni- and multiprocessor |
1da177e4 | 1191 | machines, but will use only one CPU of a multiprocessor machine. If |
4a474157 RG |
1192 | you say Y here, the kernel will run on many, but not all, |
1193 | uniprocessor machines. On a uniprocessor machine, the kernel | |
1194 | will run faster if you say N here. | |
1da177e4 | 1195 | |
cb1aaebe | 1196 | See also <file:Documentation/x86/i386/IO-APIC.rst>, |
4f4cfa6c | 1197 | <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at |
50a23e6e | 1198 | <http://tldp.org/HOWTO/SMP-HOWTO.html>. |
1da177e4 LT |
1199 | |
1200 | If you don't know what to do here, say N. | |
1201 | ||
f00ec48f | 1202 | config SMP_ON_UP |
5744ff43 | 1203 | bool "Allow booting SMP kernel on uniprocessor systems" |
801bb21c | 1204 | depends on SMP && !XIP_KERNEL && MMU |
f00ec48f RK |
1205 | default y |
1206 | help | |
1207 | SMP kernels contain instructions which fail on non-SMP processors. | |
1208 | Enabling this option allows the kernel to modify itself to make | |
1209 | these instructions safe. Disabling it allows about 1K of space | |
1210 | savings. | |
1211 | ||
1212 | If you don't know what to do here, say Y. | |
1213 | ||
c9018aab VG |
1214 | config ARM_CPU_TOPOLOGY |
1215 | bool "Support cpu topology definition" | |
1216 | depends on SMP && CPU_V7 | |
1217 | default y | |
1218 | help | |
1219 | Support ARM cpu topology definition. The MPIDR register defines | |
1220 | affinity between processors which is then used to describe the cpu | |
1221 | topology of an ARM System. | |
1222 | ||
1223 | config SCHED_MC | |
1224 | bool "Multi-core scheduler support" | |
1225 | depends on ARM_CPU_TOPOLOGY | |
1226 | help | |
1227 | Multi-core scheduler support improves the CPU scheduler's decision | |
1228 | making when dealing with multi-core CPU chips at a cost of slightly | |
1229 | increased overhead in some places. If unsure say N here. | |
1230 | ||
1231 | config SCHED_SMT | |
1232 | bool "SMT scheduler support" | |
1233 | depends on ARM_CPU_TOPOLOGY | |
1234 | help | |
1235 | Improves the CPU scheduler's decision making when dealing with | |
1236 | MultiThreading at a cost of slightly increased overhead in some | |
1237 | places. If unsure say N here. | |
1238 | ||
a8cbcd92 RK |
1239 | config HAVE_ARM_SCU |
1240 | bool | |
a8cbcd92 | 1241 | help |
8f433ec4 | 1242 | This option enables support for the ARM snoop control unit |
a8cbcd92 | 1243 | |
8a4da6e3 | 1244 | config HAVE_ARM_ARCH_TIMER |
022c03a2 MZ |
1245 | bool "Architected timer support" |
1246 | depends on CPU_V7 | |
8a4da6e3 | 1247 | select ARM_ARCH_TIMER |
0c403462 | 1248 | select GENERIC_CLOCKEVENTS |
022c03a2 MZ |
1249 | help |
1250 | This option enables support for the ARM architected timer | |
1251 | ||
f32f4ce2 RK |
1252 | config HAVE_ARM_TWD |
1253 | bool | |
f32f4ce2 RK |
1254 | help |
1255 | This options enables support for the ARM timer and watchdog unit | |
1256 | ||
e8db288e NP |
1257 | config MCPM |
1258 | bool "Multi-Cluster Power Management" | |
1259 | depends on CPU_V7 && SMP | |
1260 | help | |
1261 | This option provides the common power management infrastructure | |
1262 | for (multi-)cluster based systems, such as big.LITTLE based | |
1263 | systems. | |
1264 | ||
ebf4a5c5 HZ |
1265 | config MCPM_QUAD_CLUSTER |
1266 | bool | |
1267 | depends on MCPM | |
1268 | help | |
1269 | To avoid wasting resources unnecessarily, MCPM only supports up | |
1270 | to 2 clusters by default. | |
1271 | Platforms with 3 or 4 clusters that use MCPM must select this | |
1272 | option to allow the additional clusters to be managed. | |
1273 | ||
1c33be57 NP |
1274 | config BIG_LITTLE |
1275 | bool "big.LITTLE support (Experimental)" | |
1276 | depends on CPU_V7 && SMP | |
1277 | select MCPM | |
1278 | help | |
1279 | This option enables support selections for the big.LITTLE | |
1280 | system architecture. | |
1281 | ||
1282 | config BL_SWITCHER | |
1283 | bool "big.LITTLE switcher support" | |
6c044fec | 1284 | depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC |
51aaf81f | 1285 | select CPU_PM |
1c33be57 NP |
1286 | help |
1287 | The big.LITTLE "switcher" provides the core functionality to | |
1288 | transparently handle transition between a cluster of A15's | |
1289 | and a cluster of A7's in a big.LITTLE system. | |
1290 | ||
b22537c6 NP |
1291 | config BL_SWITCHER_DUMMY_IF |
1292 | tristate "Simple big.LITTLE switcher user interface" | |
1293 | depends on BL_SWITCHER && DEBUG_KERNEL | |
1294 | help | |
1295 | This is a simple and dummy char dev interface to control | |
1296 | the big.LITTLE switcher core code. It is meant for | |
1297 | debugging purposes only. | |
1298 | ||
8d5796d2 LB |
1299 | choice |
1300 | prompt "Memory split" | |
006fa259 | 1301 | depends on MMU |
8d5796d2 LB |
1302 | default VMSPLIT_3G |
1303 | help | |
1304 | Select the desired split between kernel and user memory. | |
1305 | ||
1306 | If you are not absolutely sure what you are doing, leave this | |
1307 | option alone! | |
1308 | ||
1309 | config VMSPLIT_3G | |
1310 | bool "3G/1G user/kernel split" | |
63ce446c | 1311 | config VMSPLIT_3G_OPT |
bbeedfda | 1312 | depends on !ARM_LPAE |
63ce446c | 1313 | bool "3G/1G user/kernel split (for full 1G low memory)" |
8d5796d2 LB |
1314 | config VMSPLIT_2G |
1315 | bool "2G/2G user/kernel split" | |
1316 | config VMSPLIT_1G | |
1317 | bool "1G/3G user/kernel split" | |
1318 | endchoice | |
1319 | ||
1320 | config PAGE_OFFSET | |
1321 | hex | |
006fa259 | 1322 | default PHYS_OFFSET if !MMU |
8d5796d2 LB |
1323 | default 0x40000000 if VMSPLIT_1G |
1324 | default 0x80000000 if VMSPLIT_2G | |
63ce446c | 1325 | default 0xB0000000 if VMSPLIT_3G_OPT |
8d5796d2 LB |
1326 | default 0xC0000000 |
1327 | ||
1da177e4 LT |
1328 | config NR_CPUS |
1329 | int "Maximum number of CPUs (2-32)" | |
1330 | range 2 32 | |
1331 | depends on SMP | |
1332 | default "4" | |
1333 | ||
a054a811 | 1334 | config HOTPLUG_CPU |
00b7dede | 1335 | bool "Support for hot-pluggable CPUs" |
40b31360 | 1336 | depends on SMP |
1b5ba350 | 1337 | select GENERIC_IRQ_MIGRATION |
a054a811 RK |
1338 | help |
1339 | Say Y here to experiment with turning CPUs off and on. CPUs | |
1340 | can be controlled through /sys/devices/system/cpu. | |
1341 | ||
2bdd424f WD |
1342 | config ARM_PSCI |
1343 | bool "Support for the ARM Power State Coordination Interface (PSCI)" | |
e679660d | 1344 | depends on HAVE_ARM_SMCCC |
be120397 | 1345 | select ARM_PSCI_FW |
2bdd424f WD |
1346 | help |
1347 | Say Y here if you want Linux to communicate with system firmware | |
1348 | implementing the PSCI specification for CPU-centric power | |
1349 | management operations described in ARM document number ARM DEN | |
1350 | 0022A ("Power State Coordination Interface System Software on | |
1351 | ARM processors"). | |
1352 | ||
2a6ad871 MR |
1353 | # The GPIO number here must be sorted by descending number. In case of |
1354 | # a multiplatform kernel, we just want the highest value required by the | |
1355 | # selected platforms. | |
44986ab0 PDSN |
1356 | config ARCH_NR_GPIO |
1357 | int | |
139358be | 1358 | default 2048 if ARCH_SOCFPGA |
d9be9ceb | 1359 | default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \ |
a3ee4fea | 1360 | ARCH_ZYNQ || ARCH_ASPEED |
aa42587a TF |
1361 | default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ |
1362 | SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 | |
eb171a99 | 1363 | default 416 if ARCH_SUNXI |
06b851e5 | 1364 | default 392 if ARCH_U8500 |
01bb914c | 1365 | default 352 if ARCH_VT8500 |
7b5da4c3 | 1366 | default 288 if ARCH_ROCKCHIP |
2a6ad871 | 1367 | default 264 if MACH_H4700 |
44986ab0 PDSN |
1368 | default 0 |
1369 | help | |
1370 | Maximum number of GPIOs in the system. | |
1371 | ||
1372 | If unsure, leave the default value. | |
1373 | ||
c9218b16 | 1374 | config HZ_FIXED |
f8065813 | 1375 | int |
da6b21e9 | 1376 | default 200 if ARCH_EBSA110 |
1164f672 | 1377 | default 128 if SOC_AT91RM9200 |
47d84682 | 1378 | default 0 |
c9218b16 RK |
1379 | |
1380 | choice | |
47d84682 | 1381 | depends on HZ_FIXED = 0 |
c9218b16 RK |
1382 | prompt "Timer frequency" |
1383 | ||
1384 | config HZ_100 | |
1385 | bool "100 Hz" | |
1386 | ||
1387 | config HZ_200 | |
1388 | bool "200 Hz" | |
1389 | ||
1390 | config HZ_250 | |
1391 | bool "250 Hz" | |
1392 | ||
1393 | config HZ_300 | |
1394 | bool "300 Hz" | |
1395 | ||
1396 | config HZ_500 | |
1397 | bool "500 Hz" | |
1398 | ||
1399 | config HZ_1000 | |
1400 | bool "1000 Hz" | |
1401 | ||
1402 | endchoice | |
1403 | ||
1404 | config HZ | |
1405 | int | |
47d84682 | 1406 | default HZ_FIXED if HZ_FIXED != 0 |
c9218b16 RK |
1407 | default 100 if HZ_100 |
1408 | default 200 if HZ_200 | |
1409 | default 250 if HZ_250 | |
1410 | default 300 if HZ_300 | |
1411 | default 500 if HZ_500 | |
1412 | default 1000 | |
1413 | ||
1414 | config SCHED_HRTICK | |
1415 | def_bool HIGH_RES_TIMERS | |
f8065813 | 1416 | |
16c79651 | 1417 | config THUMB2_KERNEL |
bc7dea00 | 1418 | bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY |
4477ca45 | 1419 | depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K |
bc7dea00 | 1420 | default y if CPU_THUMBONLY |
89bace65 | 1421 | select ARM_UNWIND |
16c79651 CM |
1422 | help |
1423 | By enabling this option, the kernel will be compiled in | |
75fea300 | 1424 | Thumb-2 mode. |
16c79651 CM |
1425 | |
1426 | If unsure, say N. | |
1427 | ||
6f685c5c DM |
1428 | config THUMB2_AVOID_R_ARM_THM_JUMP11 |
1429 | bool "Work around buggy Thumb-2 short branch relocations in gas" | |
1430 | depends on THUMB2_KERNEL && MODULES | |
1431 | default y | |
1432 | help | |
1433 | Various binutils versions can resolve Thumb-2 branches to | |
1434 | locally-defined, preemptible global symbols as short-range "b.n" | |
1435 | branch instructions. | |
1436 | ||
1437 | This is a problem, because there's no guarantee the final | |
1438 | destination of the symbol, or any candidate locations for a | |
1439 | trampoline, are within range of the branch. For this reason, the | |
1440 | kernel does not support fixing up the R_ARM_THM_JUMP11 (102) | |
1441 | relocation in modules at all, and it makes little sense to add | |
1442 | support. | |
1443 | ||
1444 | The symptom is that the kernel fails with an "unsupported | |
1445 | relocation" error when loading some modules. | |
1446 | ||
1447 | Until fixed tools are available, passing | |
1448 | -fno-optimize-sibling-calls to gcc should prevent gcc generating | |
1449 | code which hits this problem, at the cost of a bit of extra runtime | |
1450 | stack usage in some cases. | |
1451 | ||
1452 | The problem is described in more detail at: | |
1453 | https://bugs.launchpad.net/binutils-linaro/+bug/725126 | |
1454 | ||
1455 | Only Thumb-2 kernels are affected. | |
1456 | ||
1457 | Unless you are sure your tools don't have this problem, say Y. | |
1458 | ||
42f25bdd NP |
1459 | config ARM_PATCH_IDIV |
1460 | bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()" | |
1461 | depends on CPU_32v7 && !XIP_KERNEL | |
1462 | default y | |
1463 | help | |
1464 | The ARM compiler inserts calls to __aeabi_idiv() and | |
1465 | __aeabi_uidiv() when it needs to perform division on signed | |
1466 | and unsigned integers. Some v7 CPUs have support for the sdiv | |
1467 | and udiv instructions that can be used to implement those | |
1468 | functions. | |
1469 | ||
1470 | Enabling this option allows the kernel to modify itself to | |
1471 | replace the first two instructions of these library functions | |
1472 | with the sdiv or udiv plus "bx lr" instructions when the CPU | |
1473 | it is running on supports them. Typically this will be faster | |
1474 | and less power intensive than running the original library | |
1475 | code to do integer division. | |
1476 | ||
704bdda0 | 1477 | config AEABI |
a05b9608 ND |
1478 | bool "Use the ARM EABI to compile the kernel" if !CPU_V7 && \ |
1479 | !CPU_V7M && !CPU_V6 && !CPU_V6K && !CC_IS_CLANG | |
1480 | default CPU_V7 || CPU_V7M || CPU_V6 || CPU_V6K || CC_IS_CLANG | |
704bdda0 NP |
1481 | help |
1482 | This option allows for the kernel to be compiled using the latest | |
1483 | ARM ABI (aka EABI). This is only useful if you are using a user | |
1484 | space environment that is also compiled with EABI. | |
1485 | ||
1486 | Since there are major incompatibilities between the legacy ABI and | |
1487 | EABI, especially with regard to structure member alignment, this | |
1488 | option also changes the kernel syscall calling convention to | |
1489 | disambiguate both ABIs and allow for backward compatibility support | |
1490 | (selected with CONFIG_OABI_COMPAT). | |
1491 | ||
1492 | To use this you need GCC version 4.0.0 or later. | |
1493 | ||
6c90c872 | 1494 | config OABI_COMPAT |
a73a3ff1 | 1495 | bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" |
d6f94fa0 | 1496 | depends on AEABI && !THUMB2_KERNEL |
6c90c872 NP |
1497 | help |
1498 | This option preserves the old syscall interface along with the | |
1499 | new (ARM EABI) one. It also provides a compatibility layer to | |
1500 | intercept syscalls that have structure arguments which layout | |
1501 | in memory differs between the legacy ABI and the new ARM EABI | |
1502 | (only for non "thumb" binaries). This option adds a tiny | |
1503 | overhead to all syscalls and produces a slightly larger kernel. | |
91702175 KC |
1504 | |
1505 | The seccomp filter system will not be available when this is | |
1506 | selected, since there is no way yet to sensibly distinguish | |
1507 | between calling conventions during filtering. | |
1508 | ||
6c90c872 NP |
1509 | If you know you'll be using only pure EABI user space then you |
1510 | can say N here. If this option is not selected and you attempt | |
1511 | to execute a legacy ABI binary then the result will be | |
1512 | UNPREDICTABLE (in fact it can be predicted that it won't work | |
b02f8467 | 1513 | at all). If in doubt say N. |
6c90c872 | 1514 | |
eb33575c | 1515 | config ARCH_HAS_HOLES_MEMORYMODEL |
e80d6a24 | 1516 | bool |
e80d6a24 | 1517 | |
05944d74 RK |
1518 | config ARCH_SPARSEMEM_ENABLE |
1519 | bool | |
1520 | ||
07a2f737 RK |
1521 | config ARCH_SPARSEMEM_DEFAULT |
1522 | def_bool ARCH_SPARSEMEM_ENABLE | |
1523 | ||
7b7bf499 WD |
1524 | config HAVE_ARCH_PFN_VALID |
1525 | def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM | |
1526 | ||
053a96ca | 1527 | config HIGHMEM |
e8db89a2 RK |
1528 | bool "High Memory Support" |
1529 | depends on MMU | |
053a96ca NP |
1530 | help |
1531 | The address space of ARM processors is only 4 Gigabytes large | |
1532 | and it has to accommodate user address space, kernel address | |
1533 | space as well as some memory mapped IO. That means that, if you | |
1534 | have a large amount of physical memory and/or IO, not all of the | |
1535 | memory can be "permanently mapped" by the kernel. The physical | |
1536 | memory that is not permanently mapped is called "high memory". | |
1537 | ||
1538 | Depending on the selected kernel/user memory split, minimum | |
1539 | vmalloc space and actual amount of RAM, you may not need this | |
1540 | option which should result in a slightly faster kernel. | |
1541 | ||
1542 | If unsure, say n. | |
1543 | ||
65cec8e3 | 1544 | config HIGHPTE |
9a431bd5 | 1545 | bool "Allocate 2nd-level pagetables from highmem" if EXPERT |
65cec8e3 | 1546 | depends on HIGHMEM |
9a431bd5 | 1547 | default y |
b4d103d1 RK |
1548 | help |
1549 | The VM uses one page of physical memory for each page table. | |
1550 | For systems with a lot of processes, this can use a lot of | |
1551 | precious low memory, eventually leading to low memory being | |
1552 | consumed by page tables. Setting this option will allow | |
1553 | user-space 2nd level page tables to reside in high memory. | |
65cec8e3 | 1554 | |
a5e090ac RK |
1555 | config CPU_SW_DOMAIN_PAN |
1556 | bool "Enable use of CPU domains to implement privileged no-access" | |
1557 | depends on MMU && !ARM_LPAE | |
1b8873a0 JI |
1558 | default y |
1559 | help | |
a5e090ac RK |
1560 | Increase kernel security by ensuring that normal kernel accesses |
1561 | are unable to access userspace addresses. This can help prevent | |
1562 | use-after-free bugs becoming an exploitable privilege escalation | |
1563 | by ensuring that magic values (such as LIST_POISON) will always | |
1564 | fault when dereferenced. | |
1565 | ||
1566 | CPUs with low-vector mappings use a best-efforts implementation. | |
1567 | Their lower 1MB needs to remain accessible for the vectors, but | |
1568 | the remainder of userspace will become appropriately inaccessible. | |
65cec8e3 | 1569 | |
1b8873a0 | 1570 | config HW_PERF_EVENTS |
fa8ad788 MR |
1571 | def_bool y |
1572 | depends on ARM_PMU | |
1b8873a0 | 1573 | |
1355e2a6 CM |
1574 | config SYS_SUPPORTS_HUGETLBFS |
1575 | def_bool y | |
1576 | depends on ARM_LPAE | |
1577 | ||
8d962507 CM |
1578 | config HAVE_ARCH_TRANSPARENT_HUGEPAGE |
1579 | def_bool y | |
1580 | depends on ARM_LPAE | |
1581 | ||
4bfab203 SC |
1582 | config ARCH_WANT_GENERAL_HUGETLB |
1583 | def_bool y | |
1584 | ||
7d485f64 AB |
1585 | config ARM_MODULE_PLTS |
1586 | bool "Use PLTs to allow module memory to spill over into vmalloc area" | |
1587 | depends on MODULES | |
e7229f7d | 1588 | default y |
7d485f64 AB |
1589 | help |
1590 | Allocate PLTs when loading modules so that jumps and calls whose | |
1591 | targets are too far away for their relative offsets to be encoded | |
1592 | in the instructions themselves can be bounced via veneers in the | |
1593 | module's PLT. This allows modules to be allocated in the generic | |
1594 | vmalloc area after the dedicated module memory area has been | |
1595 | exhausted. The modules will use slightly more memory, but after | |
1596 | rounding up to page size, the actual memory footprint is usually | |
1597 | the same. | |
1598 | ||
e7229f7d AR |
1599 | Disabling this is usually safe for small single-platform |
1600 | configurations. If unsure, say y. | |
7d485f64 | 1601 | |
c1b2d970 | 1602 | config FORCE_MAX_ZONEORDER |
36d6c928 | 1603 | int "Maximum zone order" |
898f08e1 | 1604 | default "12" if SOC_AM33XX |
6d85e2b0 | 1605 | default "9" if SA1111 || ARCH_EFM32 |
c1b2d970 MD |
1606 | default "11" |
1607 | help | |
1608 | The kernel memory allocator divides physically contiguous memory | |
1609 | blocks into "zones", where each zone is a power of two number of | |
1610 | pages. This option selects the largest power of two that the kernel | |
1611 | keeps in the memory allocator. If you need to allocate very large | |
1612 | blocks of physically contiguous memory, then you may need to | |
1613 | increase this value. | |
1614 | ||
1615 | This config option is actually maximum order plus one. For example, | |
1616 | a value of 11 means that the largest free memory block is 2^10 pages. | |
1617 | ||
1da177e4 LT |
1618 | config ALIGNMENT_TRAP |
1619 | bool | |
f12d0d7c | 1620 | depends on CPU_CP15_MMU |
1da177e4 | 1621 | default y if !ARCH_EBSA110 |
e119bfff | 1622 | select HAVE_PROC_CPU if PROC_FS |
1da177e4 | 1623 | help |
84eb8d06 | 1624 | ARM processors cannot fetch/store information which is not |
1da177e4 LT |
1625 | naturally aligned on the bus, i.e., a 4 byte fetch must start at an |
1626 | address divisible by 4. On 32-bit ARM processors, these non-aligned | |
1627 | fetch/store instructions will be emulated in software if you say | |
1628 | here, which has a severe performance impact. This is necessary for | |
1629 | correct operation of some network protocols. With an IP-only | |
1630 | configuration it is safe to say N, otherwise say Y. | |
1631 | ||
39ec58f3 | 1632 | config UACCESS_WITH_MEMCPY |
38ef2ad5 LW |
1633 | bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()" |
1634 | depends on MMU | |
39ec58f3 LB |
1635 | default y if CPU_FEROCEON |
1636 | help | |
1637 | Implement faster copy_to_user and clear_user methods for CPU | |
1638 | cores where a 8-word STM instruction give significantly higher | |
1639 | memory write throughput than a sequence of individual 32bit stores. | |
1640 | ||
1641 | A possible side effect is a slight increase in scheduling latency | |
1642 | between threads sharing the same address space if they invoke | |
1643 | such copy operations with large buffers. | |
1644 | ||
1645 | However, if the CPU data cache is using a write-allocate mode, | |
1646 | this option is unlikely to provide any performance gain. | |
1647 | ||
70c70d97 NP |
1648 | config SECCOMP |
1649 | bool | |
1650 | prompt "Enable seccomp to safely compute untrusted bytecode" | |
1651 | ---help--- | |
1652 | This kernel feature is useful for number crunching applications | |
1653 | that may need to compute untrusted bytecode during their | |
1654 | execution. By using pipes or other transports made available to | |
1655 | the process as file descriptors supporting the read/write | |
1656 | syscalls, it's possible to isolate those applications in | |
1657 | their own address space using seccomp. Once seccomp is | |
1658 | enabled via prctl(PR_SET_SECCOMP), it cannot be disabled | |
1659 | and the task is only allowed to execute a few safe syscalls | |
1660 | defined by each seccomp mode. | |
1661 | ||
02c2433b SS |
1662 | config PARAVIRT |
1663 | bool "Enable paravirtualization code" | |
1664 | help | |
1665 | This changes the kernel so it can modify itself when it is run | |
1666 | under a hypervisor, potentially improving performance significantly | |
1667 | over full virtualization. | |
1668 | ||
1669 | config PARAVIRT_TIME_ACCOUNTING | |
1670 | bool "Paravirtual steal time accounting" | |
1671 | select PARAVIRT | |
02c2433b SS |
1672 | help |
1673 | Select this option to enable fine granularity task steal time | |
1674 | accounting. Time spent executing other tasks in parallel with | |
1675 | the current vCPU is discounted from the vCPU power. To account for | |
1676 | that, there can be a small performance impact. | |
1677 | ||
1678 | If in doubt, say N here. | |
1679 | ||
eff8d644 SS |
1680 | config XEN_DOM0 |
1681 | def_bool y | |
1682 | depends on XEN | |
1683 | ||
1684 | config XEN | |
c2ba1f7d | 1685 | bool "Xen guest support on ARM" |
85323a99 | 1686 | depends on ARM && AEABI && OF |
f880b67d | 1687 | depends on CPU_V7 && !CPU_V6 |
85323a99 | 1688 | depends on !GENERIC_ATOMIC64 |
7693decc | 1689 | depends on MMU |
51aaf81f | 1690 | select ARCH_DMA_ADDR_T_64BIT |
17b7ab80 | 1691 | select ARM_PSCI |
f21254cd | 1692 | select SWIOTLB |
83862ccf | 1693 | select SWIOTLB_XEN |
02c2433b | 1694 | select PARAVIRT |
eff8d644 SS |
1695 | help |
1696 | Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. | |
1697 | ||
189af465 AB |
1698 | config STACKPROTECTOR_PER_TASK |
1699 | bool "Use a unique stack canary value for each task" | |
1700 | depends on GCC_PLUGINS && STACKPROTECTOR && SMP && !XIP_DEFLATED_DATA | |
1701 | select GCC_PLUGIN_ARM_SSP_PER_TASK | |
1702 | default y | |
1703 | help | |
1704 | Due to the fact that GCC uses an ordinary symbol reference from | |
1705 | which to load the value of the stack canary, this value can only | |
1706 | change at reboot time on SMP systems, and all tasks running in the | |
1707 | kernel's address space are forced to use the same canary value for | |
1708 | the entire duration that the system is up. | |
1709 | ||
1710 | Enable this option to switch to a different method that uses a | |
1711 | different canary value for each task. | |
1712 | ||
1da177e4 LT |
1713 | endmenu |
1714 | ||
1715 | menu "Boot options" | |
1716 | ||
9eb8f674 GL |
1717 | config USE_OF |
1718 | bool "Flattened Device Tree support" | |
b1b3f49c | 1719 | select IRQ_DOMAIN |
9eb8f674 | 1720 | select OF |
9eb8f674 GL |
1721 | help |
1722 | Include support for flattened device tree machine descriptions. | |
1723 | ||
bd51e2f5 NP |
1724 | config ATAGS |
1725 | bool "Support for the traditional ATAGS boot data passing" if USE_OF | |
1726 | default y | |
1727 | help | |
1728 | This is the traditional way of passing data to the kernel at boot | |
1729 | time. If you are solely relying on the flattened device tree (or | |
1730 | the ARM_ATAG_DTB_COMPAT option) then you may unselect this option | |
1731 | to remove ATAGS support from your kernel binary. If unsure, | |
1732 | leave this to y. | |
1733 | ||
1734 | config DEPRECATED_PARAM_STRUCT | |
1735 | bool "Provide old way to pass kernel parameters" | |
1736 | depends on ATAGS | |
1737 | help | |
1738 | This was deprecated in 2001 and announced to live on for 5 years. | |
1739 | Some old boot loaders still use this way. | |
1740 | ||
1da177e4 LT |
1741 | # Compressed boot loader in ROM. Yes, we really want to ask about |
1742 | # TEXT and BSS so we preserve their values in the config files. | |
1743 | config ZBOOT_ROM_TEXT | |
1744 | hex "Compressed ROM boot loader base address" | |
1745 | default "0" | |
1746 | help | |
1747 | The physical address at which the ROM-able zImage is to be | |
1748 | placed in the target. Platforms which normally make use of | |
1749 | ROM-able zImage formats normally set this to a suitable | |
1750 | value in their defconfig file. | |
1751 | ||
1752 | If ZBOOT_ROM is not enabled, this has no effect. | |
1753 | ||
1754 | config ZBOOT_ROM_BSS | |
1755 | hex "Compressed ROM boot loader BSS address" | |
1756 | default "0" | |
1757 | help | |
f8c440b2 DF |
1758 | The base address of an area of read/write memory in the target |
1759 | for the ROM-able zImage which must be available while the | |
1760 | decompressor is running. It must be large enough to hold the | |
1761 | entire decompressed kernel plus an additional 128 KiB. | |
1762 | Platforms which normally make use of ROM-able zImage formats | |
1763 | normally set this to a suitable value in their defconfig file. | |
1da177e4 LT |
1764 | |
1765 | If ZBOOT_ROM is not enabled, this has no effect. | |
1766 | ||
1767 | config ZBOOT_ROM | |
1768 | bool "Compressed boot loader in ROM/flash" | |
1769 | depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS | |
10968131 | 1770 | depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR |
1da177e4 LT |
1771 | help |
1772 | Say Y here if you intend to execute your compressed kernel image | |
1773 | (zImage) directly from ROM or flash. If unsure, say N. | |
1774 | ||
e2a6a3aa JB |
1775 | config ARM_APPENDED_DTB |
1776 | bool "Use appended device tree blob to zImage (EXPERIMENTAL)" | |
10968131 | 1777 | depends on OF |
e2a6a3aa JB |
1778 | help |
1779 | With this option, the boot code will look for a device tree binary | |
1780 | (DTB) appended to zImage | |
1781 | (e.g. cat zImage <filename>.dtb > zImage_w_dtb). | |
1782 | ||
1783 | This is meant as a backward compatibility convenience for those | |
1784 | systems with a bootloader that can't be upgraded to accommodate | |
1785 | the documented boot protocol using a device tree. | |
1786 | ||
1787 | Beware that there is very little in terms of protection against | |
1788 | this option being confused by leftover garbage in memory that might | |
1789 | look like a DTB header after a reboot if no actual DTB is appended | |
1790 | to zImage. Do not leave this option active in a production kernel | |
1791 | if you don't intend to always append a DTB. Proper passing of the | |
1792 | location into r2 of a bootloader provided DTB is always preferable | |
1793 | to this option. | |
1794 | ||
b90b9a38 NP |
1795 | config ARM_ATAG_DTB_COMPAT |
1796 | bool "Supplement the appended DTB with traditional ATAG information" | |
1797 | depends on ARM_APPENDED_DTB | |
1798 | help | |
1799 | Some old bootloaders can't be updated to a DTB capable one, yet | |
1800 | they provide ATAGs with memory configuration, the ramdisk address, | |
1801 | the kernel cmdline string, etc. Such information is dynamically | |
1802 | provided by the bootloader and can't always be stored in a static | |
1803 | DTB. To allow a device tree enabled kernel to be used with such | |
1804 | bootloaders, this option allows zImage to extract the information | |
1805 | from the ATAG list and store it at run time into the appended DTB. | |
1806 | ||
d0f34a11 GR |
1807 | choice |
1808 | prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT | |
1809 | default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER | |
1810 | ||
1811 | config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER | |
1812 | bool "Use bootloader kernel arguments if available" | |
1813 | help | |
1814 | Uses the command-line options passed by the boot loader instead of | |
1815 | the device tree bootargs property. If the boot loader doesn't provide | |
1816 | any, the device tree bootargs property will be used. | |
1817 | ||
1818 | config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND | |
1819 | bool "Extend with bootloader kernel arguments" | |
1820 | help | |
1821 | The command-line arguments provided by the boot loader will be | |
1822 | appended to the the device tree bootargs property. | |
1823 | ||
1824 | endchoice | |
1825 | ||
1da177e4 LT |
1826 | config CMDLINE |
1827 | string "Default kernel command string" | |
1828 | default "" | |
1829 | help | |
1830 | On some architectures (EBSA110 and CATS), there is currently no way | |
1831 | for the boot loader to pass arguments to the kernel. For these | |
1832 | architectures, you should supply some command-line options at build | |
1833 | time by entering them here. As a minimum, you should specify the | |
1834 | memory size and the root device (e.g., mem=64M root=/dev/nfs). | |
1835 | ||
4394c124 VB |
1836 | choice |
1837 | prompt "Kernel command line type" if CMDLINE != "" | |
1838 | default CMDLINE_FROM_BOOTLOADER | |
bd51e2f5 | 1839 | depends on ATAGS |
4394c124 VB |
1840 | |
1841 | config CMDLINE_FROM_BOOTLOADER | |
1842 | bool "Use bootloader kernel arguments if available" | |
1843 | help | |
1844 | Uses the command-line options passed by the boot loader. If | |
1845 | the boot loader doesn't provide any, the default kernel command | |
1846 | string provided in CMDLINE will be used. | |
1847 | ||
1848 | config CMDLINE_EXTEND | |
1849 | bool "Extend bootloader kernel arguments" | |
1850 | help | |
1851 | The command-line arguments provided by the boot loader will be | |
1852 | appended to the default kernel command string. | |
1853 | ||
92d2040d AH |
1854 | config CMDLINE_FORCE |
1855 | bool "Always use the default kernel command string" | |
92d2040d AH |
1856 | help |
1857 | Always use the default kernel command string, even if the boot | |
1858 | loader passes other arguments to the kernel. | |
1859 | This is useful if you cannot or don't want to change the | |
1860 | command-line options your boot loader passes to the kernel. | |
4394c124 | 1861 | endchoice |
92d2040d | 1862 | |
1da177e4 LT |
1863 | config XIP_KERNEL |
1864 | bool "Kernel Execute-In-Place from ROM" | |
10968131 | 1865 | depends on !ARM_LPAE && !ARCH_MULTIPLATFORM |
1da177e4 LT |
1866 | help |
1867 | Execute-In-Place allows the kernel to run from non-volatile storage | |
1868 | directly addressable by the CPU, such as NOR flash. This saves RAM | |
1869 | space since the text section of the kernel is not loaded from flash | |
1870 | to RAM. Read-write sections, such as the data section and stack, | |
1871 | are still copied to RAM. The XIP kernel is not compressed since | |
1872 | it has to run directly from flash, so it will take more space to | |
1873 | store it. The flash address used to link the kernel object files, | |
1874 | and for storing it, is configuration dependent. Therefore, if you | |
1875 | say Y here, you must know the proper physical address where to | |
1876 | store the kernel image depending on your own flash memory usage. | |
1877 | ||
1878 | Also note that the make target becomes "make xipImage" rather than | |
1879 | "make zImage" or "make Image". The final kernel binary to put in | |
1880 | ROM memory will be arch/arm/boot/xipImage. | |
1881 | ||
1882 | If unsure, say N. | |
1883 | ||
1884 | config XIP_PHYS_ADDR | |
1885 | hex "XIP Kernel Physical Location" | |
1886 | depends on XIP_KERNEL | |
1887 | default "0x00080000" | |
1888 | help | |
1889 | This is the physical address in your flash memory the kernel will | |
1890 | be linked for and stored to. This address is dependent on your | |
1891 | own flash usage. | |
1892 | ||
ca8b5d97 NP |
1893 | config XIP_DEFLATED_DATA |
1894 | bool "Store kernel .data section compressed in ROM" | |
1895 | depends on XIP_KERNEL | |
1896 | select ZLIB_INFLATE | |
1897 | help | |
1898 | Before the kernel is actually executed, its .data section has to be | |
1899 | copied to RAM from ROM. This option allows for storing that data | |
1900 | in compressed form and decompressed to RAM rather than merely being | |
1901 | copied, saving some precious ROM space. A possible drawback is a | |
1902 | slightly longer boot delay. | |
1903 | ||
c587e4a6 RP |
1904 | config KEXEC |
1905 | bool "Kexec system call (EXPERIMENTAL)" | |
19ab428f | 1906 | depends on (!SMP || PM_SLEEP_SMP) |
cb1293e2 | 1907 | depends on !CPU_V7M |
2965faa5 | 1908 | select KEXEC_CORE |
c587e4a6 RP |
1909 | help |
1910 | kexec is a system call that implements the ability to shutdown your | |
1911 | current kernel, and to start another kernel. It is like a reboot | |
01dd2fbf | 1912 | but it is independent of the system firmware. And like a reboot |
c587e4a6 RP |
1913 | you can start any kernel with it, not just Linux. |
1914 | ||
1915 | It is an ongoing process to be certain the hardware in a machine | |
1916 | is properly shutdown, so do not be surprised if this code does not | |
bf220695 | 1917 | initially work for you. |
c587e4a6 | 1918 | |
4cd9d6f7 RP |
1919 | config ATAGS_PROC |
1920 | bool "Export atags in procfs" | |
bd51e2f5 | 1921 | depends on ATAGS && KEXEC |
b98d7291 | 1922 | default y |
4cd9d6f7 RP |
1923 | help |
1924 | Should the atags used to boot the kernel be exported in an "atags" | |
1925 | file in procfs. Useful with kexec. | |
1926 | ||
cb5d39b3 MW |
1927 | config CRASH_DUMP |
1928 | bool "Build kdump crash kernel (EXPERIMENTAL)" | |
cb5d39b3 MW |
1929 | help |
1930 | Generate crash dump after being started by kexec. This should | |
1931 | be normally only set in special crash dump kernels which are | |
1932 | loaded in the main kernel with kexec-tools into a specially | |
1933 | reserved region and then later executed after a crash by | |
1934 | kdump/kexec. The crash dump kernel must be compiled to a | |
1935 | memory address not used by the main kernel | |
1936 | ||
330d4810 | 1937 | For more details see Documentation/admin-guide/kdump/kdump.rst |
cb5d39b3 | 1938 | |
e69edc79 EM |
1939 | config AUTO_ZRELADDR |
1940 | bool "Auto calculation of the decompressed kernel image address" | |
e69edc79 EM |
1941 | help |
1942 | ZRELADDR is the physical address where the decompressed kernel | |
1943 | image will be placed. If AUTO_ZRELADDR is selected, the address | |
1944 | will be determined at run-time by masking the current IP with | |
1945 | 0xf8000000. This assumes the zImage being placed in the first 128MB | |
1946 | from start of memory. | |
1947 | ||
81a0bc39 RF |
1948 | config EFI_STUB |
1949 | bool | |
1950 | ||
1951 | config EFI | |
1952 | bool "UEFI runtime support" | |
1953 | depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL | |
1954 | select UCS2_STRING | |
1955 | select EFI_PARAMS_FROM_FDT | |
1956 | select EFI_STUB | |
1957 | select EFI_ARMSTUB | |
1958 | select EFI_RUNTIME_WRAPPERS | |
1959 | ---help--- | |
1960 | This option provides support for runtime services provided | |
1961 | by UEFI firmware (such as non-volatile variables, realtime | |
1962 | clock, and platform reset). A UEFI stub is also provided to | |
1963 | allow the kernel to be booted as an EFI application. This | |
1964 | is only useful for kernels that may run on systems that have | |
1965 | UEFI firmware. | |
1966 | ||
bb817bef AB |
1967 | config DMI |
1968 | bool "Enable support for SMBIOS (DMI) tables" | |
1969 | depends on EFI | |
1970 | default y | |
1971 | help | |
1972 | This enables SMBIOS/DMI feature for systems. | |
1973 | ||
1974 | This option is only useful on systems that have UEFI firmware. | |
1975 | However, even with this option, the resultant kernel should | |
1976 | continue to boot on existing non-UEFI platforms. | |
1977 | ||
1978 | NOTE: This does *NOT* enable or encourage the use of DMI quirks, | |
1979 | i.e., the the practice of identifying the platform via DMI to | |
1980 | decide whether certain workarounds for buggy hardware and/or | |
1981 | firmware need to be enabled. This would require the DMI subsystem | |
1982 | to be enabled much earlier than we do on ARM, which is non-trivial. | |
1983 | ||
1da177e4 LT |
1984 | endmenu |
1985 | ||
ac9d7efc | 1986 | menu "CPU Power Management" |
1da177e4 | 1987 | |
1da177e4 | 1988 | source "drivers/cpufreq/Kconfig" |
1da177e4 | 1989 | |
ac9d7efc RK |
1990 | source "drivers/cpuidle/Kconfig" |
1991 | ||
1992 | endmenu | |
1993 | ||
1da177e4 LT |
1994 | menu "Floating point emulation" |
1995 | ||
1996 | comment "At least one emulation must be selected" | |
1997 | ||
1998 | config FPE_NWFPE | |
1999 | bool "NWFPE math emulation" | |
593c252a | 2000 | depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL |
1da177e4 LT |
2001 | ---help--- |
2002 | Say Y to include the NWFPE floating point emulator in the kernel. | |
2003 | This is necessary to run most binaries. Linux does not currently | |
2004 | support floating point hardware so you need to say Y here even if | |
2005 | your machine has an FPA or floating point co-processor podule. | |
2006 | ||
2007 | You may say N here if you are going to load the Acorn FPEmulator | |
2008 | early in the bootup. | |
2009 | ||
2010 | config FPE_NWFPE_XP | |
2011 | bool "Support extended precision" | |
bedf142b | 2012 | depends on FPE_NWFPE |
1da177e4 LT |
2013 | help |
2014 | Say Y to include 80-bit support in the kernel floating-point | |
2015 | emulator. Otherwise, only 32 and 64-bit support is compiled in. | |
2016 | Note that gcc does not generate 80-bit operations by default, | |
2017 | so in most cases this option only enlarges the size of the | |
2018 | floating point emulator without any good reason. | |
2019 | ||
2020 | You almost surely want to say N here. | |
2021 | ||
2022 | config FPE_FASTFPE | |
2023 | bool "FastFPE math emulation (EXPERIMENTAL)" | |
d6f94fa0 | 2024 | depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 |
1da177e4 LT |
2025 | ---help--- |
2026 | Say Y here to include the FAST floating point emulator in the kernel. | |
2027 | This is an experimental much faster emulator which now also has full | |
2028 | precision for the mantissa. It does not support any exceptions. | |
2029 | It is very simple, and approximately 3-6 times faster than NWFPE. | |
2030 | ||
2031 | It should be sufficient for most programs. It may be not suitable | |
2032 | for scientific calculations, but you have to check this for yourself. | |
2033 | If you do not feel you need a faster FP emulation you should better | |
2034 | choose NWFPE. | |
2035 | ||
2036 | config VFP | |
2037 | bool "VFP-format floating point maths" | |
e399b1a4 | 2038 | depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON |
1da177e4 LT |
2039 | help |
2040 | Say Y to include VFP support code in the kernel. This is needed | |
2041 | if your hardware includes a VFP unit. | |
2042 | ||
dc7a12bd | 2043 | Please see <file:Documentation/arm/vfp/release-notes.rst> for |
1da177e4 LT |
2044 | release notes and additional status information. |
2045 | ||
2046 | Say N if your target does not have VFP hardware. | |
2047 | ||
25ebee02 CM |
2048 | config VFPv3 |
2049 | bool | |
2050 | depends on VFP | |
2051 | default y if CPU_V7 | |
2052 | ||
b5872db4 CM |
2053 | config NEON |
2054 | bool "Advanced SIMD (NEON) Extension support" | |
2055 | depends on VFPv3 && CPU_V7 | |
2056 | help | |
2057 | Say Y to include support code for NEON, the ARMv7 Advanced SIMD | |
2058 | Extension. | |
2059 | ||
73c132c1 AB |
2060 | config KERNEL_MODE_NEON |
2061 | bool "Support for NEON in kernel mode" | |
c4a30c3b | 2062 | depends on NEON && AEABI |
73c132c1 AB |
2063 | help |
2064 | Say Y to include support for NEON in kernel mode. | |
2065 | ||
1da177e4 LT |
2066 | endmenu |
2067 | ||
1da177e4 LT |
2068 | menu "Power management options" |
2069 | ||
eceab4ac | 2070 | source "kernel/power/Kconfig" |
1da177e4 | 2071 | |
f4cb5700 | 2072 | config ARCH_SUSPEND_POSSIBLE |
19a0519d | 2073 | depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \ |
f0d75153 | 2074 | CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK |
f4cb5700 JB |
2075 | def_bool y |
2076 | ||
15e0d9e3 | 2077 | config ARM_CPU_SUSPEND |
8b6f2499 | 2078 | def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW |
1b9bdf5c | 2079 | depends on ARCH_SUSPEND_POSSIBLE |
15e0d9e3 | 2080 | |
603fb42a SC |
2081 | config ARCH_HIBERNATION_POSSIBLE |
2082 | bool | |
2083 | depends on MMU | |
2084 | default y if ARCH_SUSPEND_POSSIBLE | |
2085 | ||
1da177e4 LT |
2086 | endmenu |
2087 | ||
916f743d KG |
2088 | source "drivers/firmware/Kconfig" |
2089 | ||
652ccae5 AB |
2090 | if CRYPTO |
2091 | source "arch/arm/crypto/Kconfig" | |
2092 | endif | |
1da177e4 | 2093 | |
749cf76c | 2094 | source "arch/arm/kvm/Kconfig" |