]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # For a description of the syntax of this configuration file, | |
3 | # see Documentation/kbuild/kconfig-language.txt. | |
4 | # | |
5 | ||
6 | mainmenu "Linux Kernel Configuration" | |
7 | ||
8 | config ARM | |
9 | bool | |
10 | default y | |
12b824fb | 11 | select RTC_LIB |
75e7153a | 12 | select SYS_SUPPORTS_APM_EMULATION |
1da177e4 LT |
13 | help |
14 | The ARM series is a line of low-power-consumption RISC chip designs | |
f6c8965a | 15 | licensed by ARM Ltd and targeted at embedded applications and |
1da177e4 | 16 | handhelds such as the Compaq IPAQ. ARM-based PCs are no longer |
f6c8965a | 17 | manufactured, but legacy ARM-based PC hardware remains popular in |
1da177e4 LT |
18 | Europe. There is an ARM Linux project with a web page at |
19 | <http://www.arm.linux.org.uk/>. | |
20 | ||
75e7153a RB |
21 | config SYS_SUPPORTS_APM_EMULATION |
22 | bool | |
23 | ||
746140c7 KH |
24 | config GENERIC_TIME |
25 | bool | |
26 | default n | |
27 | ||
1da177e4 LT |
28 | config MMU |
29 | bool | |
30 | default y | |
31 | ||
32 | config EISA | |
33 | bool | |
34 | ---help--- | |
35 | The Extended Industry Standard Architecture (EISA) bus was | |
36 | developed as an open alternative to the IBM MicroChannel bus. | |
37 | ||
38 | The EISA bus provided some of the features of the IBM MicroChannel | |
39 | bus while maintaining backward compatibility with cards made for | |
40 | the older ISA bus. The EISA bus saw limited use between 1988 and | |
41 | 1995 when it was made obsolete by the PCI bus. | |
42 | ||
43 | Say Y here if you are building a kernel for an EISA-based machine. | |
44 | ||
45 | Otherwise, say N. | |
46 | ||
47 | config SBUS | |
48 | bool | |
49 | ||
50 | config MCA | |
51 | bool | |
52 | help | |
53 | MicroChannel Architecture is found in some IBM PS/2 machines and | |
54 | laptops. It is a bus system similar to PCI or ISA. See | |
55 | <file:Documentation/mca.txt> (and especially the web page given | |
56 | there) before attempting to build an MCA bus kernel. | |
57 | ||
4a2581a0 TG |
58 | config GENERIC_HARDIRQS |
59 | bool | |
60 | default y | |
61 | ||
7ad1bcb2 RK |
62 | config TRACE_IRQFLAGS_SUPPORT |
63 | bool | |
64 | default y | |
65 | ||
4a2581a0 TG |
66 | config HARDIRQS_SW_RESEND |
67 | bool | |
68 | default y | |
69 | ||
70 | config GENERIC_IRQ_PROBE | |
71 | bool | |
72 | default y | |
73 | ||
1da177e4 LT |
74 | config RWSEM_GENERIC_SPINLOCK |
75 | bool | |
76 | default y | |
77 | ||
78 | config RWSEM_XCHGADD_ALGORITHM | |
79 | bool | |
80 | ||
f0d1b0b3 DH |
81 | config ARCH_HAS_ILOG2_U32 |
82 | bool | |
83 | default n | |
84 | ||
85 | config ARCH_HAS_ILOG2_U64 | |
86 | bool | |
87 | default n | |
88 | ||
b89c3b16 AM |
89 | config GENERIC_HWEIGHT |
90 | bool | |
91 | default y | |
92 | ||
1da177e4 LT |
93 | config GENERIC_CALIBRATE_DELAY |
94 | bool | |
95 | default y | |
96 | ||
97 | config GENERIC_BUST_SPINLOCK | |
98 | bool | |
99 | ||
a08b6b79 AV |
100 | config ARCH_MAY_HAVE_PC_FDC |
101 | bool | |
102 | ||
1da177e4 LT |
103 | config GENERIC_ISA_DMA |
104 | bool | |
105 | ||
1da177e4 LT |
106 | config FIQ |
107 | bool | |
108 | ||
034d2f5a AV |
109 | config ARCH_MTD_XIP |
110 | bool | |
111 | ||
c760fc19 HC |
112 | config VECTORS_BASE |
113 | hex | |
6afd6fae | 114 | default 0xffff0000 if MMU || CPU_HIGH_VECTOR |
c760fc19 HC |
115 | default DRAM_BASE if REMAP_VECTORS_TO_RAM |
116 | default 0x00000000 | |
117 | help | |
118 | The base address of exception vectors. | |
119 | ||
1da177e4 LT |
120 | source "init/Kconfig" |
121 | ||
122 | menu "System Type" | |
123 | ||
124 | choice | |
125 | prompt "ARM system type" | |
6a0e2430 | 126 | default ARCH_VERSATILE |
1da177e4 | 127 | |
4af6fee1 DS |
128 | config ARCH_AAEC2000 |
129 | bool "Agilent AAEC-2000 based" | |
130 | select ARM_AMBA | |
131 | help | |
132 | This enables support for systems based on the Agilent AAEC-2000 | |
133 | ||
134 | config ARCH_INTEGRATOR | |
135 | bool "ARM Ltd. Integrator family" | |
136 | select ARM_AMBA | |
137 | select ICST525 | |
138 | help | |
139 | Support for ARM's Integrator platform. | |
140 | ||
141 | config ARCH_REALVIEW | |
142 | bool "ARM Ltd. RealView family" | |
143 | select ARM_AMBA | |
144 | select ICST307 | |
145 | help | |
146 | This enables support for ARM Ltd RealView boards. | |
147 | ||
148 | config ARCH_VERSATILE | |
149 | bool "ARM Ltd. Versatile family" | |
150 | select ARM_AMBA | |
151 | select ARM_VIC | |
152 | select ICST307 | |
153 | help | |
154 | This enables support for ARM Ltd Versatile board. | |
155 | ||
8fc5ffa0 AV |
156 | config ARCH_AT91 |
157 | bool "Atmel AT91" | |
4af6fee1 | 158 | help |
8fc5ffa0 AV |
159 | This enables support for systems based on the Atmel AT91RM9200 |
160 | and AT91SAM9xxx processors. | |
4af6fee1 | 161 | |
1da177e4 | 162 | config ARCH_CLPS7500 |
4af6fee1 | 163 | bool "Cirrus CL-PS7500FE" |
1da177e4 | 164 | select TIMER_ACORN |
f7e68bbf | 165 | select ISA |
f999b8bd MM |
166 | help |
167 | Support for the Cirrus Logic PS7500FE system-on-a-chip. | |
1da177e4 LT |
168 | |
169 | config ARCH_CLPS711X | |
4af6fee1 | 170 | bool "Cirrus Logic CLPS711x/EP721x-based" |
f999b8bd MM |
171 | help |
172 | Support for Cirrus Logic 711x/721x based boards. | |
1da177e4 LT |
173 | |
174 | config ARCH_CO285 | |
175 | bool "Co-EBSA285" | |
176 | select FOOTBRIDGE | |
177 | select FOOTBRIDGE_ADDIN | |
f999b8bd MM |
178 | help |
179 | Support for Intel's EBSA285 companion chip. | |
1da177e4 LT |
180 | |
181 | config ARCH_EBSA110 | |
182 | bool "EBSA-110" | |
f7e68bbf | 183 | select ISA |
1da177e4 LT |
184 | help |
185 | This is an evaluation board for the StrongARM processor available | |
f6c8965a | 186 | from Digital. It has limited hardware on-board, including an |
1da177e4 LT |
187 | Ethernet interface, two PCMCIA sockets, two serial ports and a |
188 | parallel port. | |
189 | ||
e7736d47 LB |
190 | config ARCH_EP93XX |
191 | bool "EP93xx-based" | |
192 | select ARM_AMBA | |
193 | select ARM_VIC | |
194 | help | |
195 | This enables support for the Cirrus EP93xx series of CPUs. | |
196 | ||
1da177e4 LT |
197 | config ARCH_FOOTBRIDGE |
198 | bool "FootBridge" | |
199 | select FOOTBRIDGE | |
f999b8bd MM |
200 | help |
201 | Support for systems based on the DC21285 companion chip | |
202 | ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. | |
1da177e4 | 203 | |
4af6fee1 DS |
204 | config ARCH_NETX |
205 | bool "Hilscher NetX based" | |
206 | select ARM_VIC | |
f999b8bd | 207 | help |
4af6fee1 DS |
208 | This enables support for systems based on the Hilscher NetX Soc |
209 | ||
210 | config ARCH_H720X | |
211 | bool "Hynix HMS720x-based" | |
212 | select ISA_DMA_API | |
213 | help | |
214 | This enables support for systems based on the Hynix HMS720x | |
215 | ||
216 | config ARCH_IMX | |
217 | bool "IMX" | |
218 | help | |
219 | Support for Motorola's i.MX family of processors (MX1, MXL). | |
1da177e4 | 220 | |
3f7e5815 LB |
221 | config ARCH_IOP32X |
222 | bool "IOP32x-based" | |
a4f7e763 | 223 | depends on MMU |
7ae1f7ec | 224 | select PLAT_IOP |
f7e68bbf | 225 | select PCI |
f999b8bd | 226 | help |
3f7e5815 LB |
227 | Support for Intel's 80219 and IOP32X (XScale) family of |
228 | processors. | |
229 | ||
230 | config ARCH_IOP33X | |
231 | bool "IOP33x-based" | |
232 | depends on MMU | |
7ae1f7ec | 233 | select PLAT_IOP |
3f7e5815 LB |
234 | select PCI |
235 | help | |
236 | Support for Intel's IOP33X (XScale) family of processors. | |
1da177e4 | 237 | |
285f5fa7 DW |
238 | config ARCH_IOP13XX |
239 | bool "IOP13xx-based" | |
240 | select PCI | |
241 | help | |
242 | Support for Intel's IOP13XX (XScale) family of processors. | |
243 | ||
1da177e4 LT |
244 | config ARCH_IXP4XX |
245 | bool "IXP4xx-based" | |
a4f7e763 | 246 | depends on MMU |
84904d0e | 247 | select GENERIC_TIME |
f999b8bd MM |
248 | help |
249 | Support for Intel's IXP4XX (XScale) family of processors. | |
1da177e4 LT |
250 | |
251 | config ARCH_IXP2000 | |
252 | bool "IXP2400/2800-based" | |
a4f7e763 | 253 | depends on MMU |
f7e68bbf | 254 | select PCI |
f999b8bd MM |
255 | help |
256 | Support for Intel's IXP2400/2800 (XScale) family of processors. | |
1da177e4 | 257 | |
c4713074 LB |
258 | config ARCH_IXP23XX |
259 | bool "IXP23XX-based" | |
a4f7e763 | 260 | depends on MMU |
c4713074 LB |
261 | select PCI |
262 | help | |
263 | Support for Intel's IXP23xx (XScale) family of processors. | |
264 | ||
1da177e4 LT |
265 | config ARCH_L7200 |
266 | bool "LinkUp-L7200" | |
267 | select FIQ | |
268 | help | |
269 | Say Y here if you intend to run this kernel on a LinkUp Systems | |
270 | L7200 Software Development Board which uses an ARM720T processor. | |
271 | Information on this board can be obtained at: | |
272 | ||
273 | <http://www.linkupsys.com/> | |
274 | ||
275 | If you have any questions or comments about the Linux kernel port | |
276 | to this board, send e-mail to <sjhill@cotw.com>. | |
277 | ||
4af6fee1 DS |
278 | config ARCH_PNX4008 |
279 | bool "Philips Nexperia PNX4008 Mobile" | |
280 | help | |
281 | This enables support for Philips PNX4008 mobile platform. | |
282 | ||
1da177e4 LT |
283 | config ARCH_PXA |
284 | bool "PXA2xx-based" | |
a4f7e763 | 285 | depends on MMU |
034d2f5a | 286 | select ARCH_MTD_XIP |
f999b8bd MM |
287 | help |
288 | Support for Intel's PXA2XX processor line. | |
1da177e4 LT |
289 | |
290 | config ARCH_RPC | |
291 | bool "RiscPC" | |
292 | select ARCH_ACORN | |
293 | select FIQ | |
294 | select TIMER_ACORN | |
a08b6b79 | 295 | select ARCH_MAY_HAVE_PC_FDC |
065909b9 | 296 | select ISA_DMA_API |
1da177e4 LT |
297 | help |
298 | On the Acorn Risc-PC, Linux can support the internal IDE disk and | |
299 | CD-ROM interface, serial and parallel port, and the floppy drive. | |
300 | ||
301 | config ARCH_SA1100 | |
302 | bool "SA1100-based" | |
f7e68bbf | 303 | select ISA |
3cd9e19e | 304 | select ARCH_DISCONTIGMEM_ENABLE |
034d2f5a | 305 | select ARCH_MTD_XIP |
f999b8bd MM |
306 | help |
307 | Support for StrongARM 11x0 based boards. | |
1da177e4 LT |
308 | |
309 | config ARCH_S3C2410 | |
cd701aa2 | 310 | bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442" |
1da177e4 LT |
311 | help |
312 | Samsung S3C2410X CPU based systems, such as the Simtec Electronics | |
313 | BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or | |
f6c8965a | 314 | the Samsung SMDK2410 development board (and derivatives). |
1da177e4 LT |
315 | |
316 | config ARCH_SHARK | |
317 | bool "Shark" | |
f7e68bbf RK |
318 | select ISA |
319 | select ISA_DMA | |
320 | select PCI | |
f999b8bd MM |
321 | help |
322 | Support for the StrongARM based Digital DNARD machine, also known | |
323 | as "Shark" (<http://www.shark-linux.de/shark.html>). | |
1da177e4 LT |
324 | |
325 | config ARCH_LH7A40X | |
326 | bool "Sharp LH7A40X" | |
327 | help | |
328 | Say Y here for systems based on one of the Sharp LH7A40X | |
329 | System on a Chip processors. These CPUs include an ARM922T | |
330 | core with a wide array of integrated devices for | |
331 | hand-held and low-power applications. | |
332 | ||
333 | config ARCH_OMAP | |
334 | bool "TI OMAP" | |
f999b8bd MM |
335 | help |
336 | Support for TI's OMAP platform (OMAP1 and OMAP2). | |
1da177e4 | 337 | |
1da177e4 LT |
338 | endchoice |
339 | ||
340 | source "arch/arm/mach-clps711x/Kconfig" | |
341 | ||
e7736d47 LB |
342 | source "arch/arm/mach-ep93xx/Kconfig" |
343 | ||
1da177e4 LT |
344 | source "arch/arm/mach-footbridge/Kconfig" |
345 | ||
346 | source "arch/arm/mach-integrator/Kconfig" | |
347 | ||
3f7e5815 LB |
348 | source "arch/arm/mach-iop32x/Kconfig" |
349 | ||
350 | source "arch/arm/mach-iop33x/Kconfig" | |
1da177e4 | 351 | |
285f5fa7 DW |
352 | source "arch/arm/mach-iop13xx/Kconfig" |
353 | ||
1da177e4 LT |
354 | source "arch/arm/mach-ixp4xx/Kconfig" |
355 | ||
356 | source "arch/arm/mach-ixp2000/Kconfig" | |
357 | ||
c4713074 LB |
358 | source "arch/arm/mach-ixp23xx/Kconfig" |
359 | ||
1da177e4 LT |
360 | source "arch/arm/mach-pxa/Kconfig" |
361 | ||
362 | source "arch/arm/mach-sa1100/Kconfig" | |
363 | ||
d48af15e TL |
364 | source "arch/arm/plat-omap/Kconfig" |
365 | ||
366 | source "arch/arm/mach-omap1/Kconfig" | |
1da177e4 | 367 | |
1dbae815 TL |
368 | source "arch/arm/mach-omap2/Kconfig" |
369 | ||
1da177e4 LT |
370 | source "arch/arm/mach-s3c2410/Kconfig" |
371 | ||
372 | source "arch/arm/mach-lh7a40x/Kconfig" | |
373 | ||
374 | source "arch/arm/mach-imx/Kconfig" | |
375 | ||
376 | source "arch/arm/mach-h720x/Kconfig" | |
377 | ||
378 | source "arch/arm/mach-versatile/Kconfig" | |
379 | ||
038c5b60 BN |
380 | source "arch/arm/mach-aaec2000/Kconfig" |
381 | ||
8ad68bbf CM |
382 | source "arch/arm/mach-realview/Kconfig" |
383 | ||
73a59c1c SP |
384 | source "arch/arm/mach-at91rm9200/Kconfig" |
385 | ||
bb6d8c88 SH |
386 | source "arch/arm/mach-netx/Kconfig" |
387 | ||
1da177e4 LT |
388 | # Definitions to make life easier |
389 | config ARCH_ACORN | |
390 | bool | |
391 | ||
7ae1f7ec LB |
392 | config PLAT_IOP |
393 | bool | |
394 | ||
1da177e4 LT |
395 | source arch/arm/mm/Kconfig |
396 | ||
afe4b25e LB |
397 | config IWMMXT |
398 | bool "Enable iWMMXt support" | |
399 | depends CPU_XSCALE || CPU_XSC3 | |
400 | default y if PXA27x | |
401 | help | |
402 | Enable support for iWMMXt context switching at run time if | |
403 | running on a CPU that supports it. | |
404 | ||
1da177e4 LT |
405 | # bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER |
406 | config XSCALE_PMU | |
407 | bool | |
408 | depends on CPU_XSCALE && !XSCALE_PMU_TIMER | |
409 | default y | |
410 | ||
3b93e7b0 HC |
411 | if !MMU |
412 | source "arch/arm/Kconfig-nommu" | |
413 | endif | |
414 | ||
1da177e4 LT |
415 | endmenu |
416 | ||
417 | source "arch/arm/common/Kconfig" | |
418 | ||
419 | config FORCE_MAX_ZONEORDER | |
420 | int | |
421 | depends on SA1111 | |
422 | default "9" | |
423 | ||
424 | menu "Bus support" | |
425 | ||
426 | config ARM_AMBA | |
427 | bool | |
428 | ||
429 | config ISA | |
430 | bool | |
1da177e4 LT |
431 | help |
432 | Find out whether you have ISA slots on your motherboard. ISA is the | |
433 | name of a bus system, i.e. the way the CPU talks to the other stuff | |
434 | inside your box. Other bus systems are PCI, EISA, MicroChannel | |
435 | (MCA) or VESA. ISA is an older system, now being displaced by PCI; | |
436 | newer boards don't support it. If you have ISA, say Y, otherwise N. | |
437 | ||
065909b9 | 438 | # Select ISA DMA controller support |
1da177e4 LT |
439 | config ISA_DMA |
440 | bool | |
065909b9 | 441 | select ISA_DMA_API |
1da177e4 | 442 | |
065909b9 | 443 | # Select ISA DMA interface |
5cae841b AV |
444 | config ISA_DMA_API |
445 | bool | |
5cae841b | 446 | |
1da177e4 | 447 | config PCI |
68939121 | 448 | bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX |
1da177e4 LT |
449 | help |
450 | Find out whether you have a PCI motherboard. PCI is the name of a | |
451 | bus system, i.e. the way the CPU talks to the other stuff inside | |
452 | your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or | |
453 | VESA. If you have PCI, say Y, otherwise N. | |
454 | ||
455 | The PCI-HOWTO, available from | |
456 | <http://www.tldp.org/docs.html#howto>, contains valuable | |
457 | information about which PCI hardware does work under Linux and which | |
458 | doesn't. | |
459 | ||
460 | # Select the host bridge type | |
461 | config PCI_HOST_VIA82C505 | |
462 | bool | |
463 | depends on PCI && ARCH_SHARK | |
464 | default y | |
465 | ||
466 | source "drivers/pci/Kconfig" | |
467 | ||
468 | source "drivers/pcmcia/Kconfig" | |
469 | ||
470 | endmenu | |
471 | ||
472 | menu "Kernel Features" | |
473 | ||
474 | config SMP | |
475 | bool "Symmetric Multi-Processing (EXPERIMENTAL)" | |
f6db449c | 476 | depends on EXPERIMENTAL && REALVIEW_MPCORE |
1da177e4 LT |
477 | help |
478 | This enables support for systems with more than one CPU. If you have | |
479 | a system with only one CPU, like most personal computers, say N. If | |
480 | you have a system with more than one CPU, say Y. | |
481 | ||
482 | If you say N here, the kernel will run on single and multiprocessor | |
483 | machines, but will use only one CPU of a multiprocessor machine. If | |
484 | you say Y here, the kernel will run on many, but not all, single | |
485 | processor machines. On a single processor machine, the kernel will | |
486 | run faster if you say N here. | |
487 | ||
12c62c2e AO |
488 | See also the <file:Documentation/smp.txt>, |
489 | <file:Documentation/i386/IO-APIC.txt>, | |
1da177e4 LT |
490 | <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at |
491 | <http://www.linuxdoc.org/docs.html#howto>. | |
492 | ||
493 | If you don't know what to do here, say N. | |
494 | ||
495 | config NR_CPUS | |
496 | int "Maximum number of CPUs (2-32)" | |
497 | range 2 32 | |
498 | depends on SMP | |
499 | default "4" | |
500 | ||
a054a811 RK |
501 | config HOTPLUG_CPU |
502 | bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" | |
503 | depends on SMP && HOTPLUG && EXPERIMENTAL | |
504 | help | |
505 | Say Y here to experiment with turning CPUs off and on. CPUs | |
506 | can be controlled through /sys/devices/system/cpu. | |
507 | ||
37ee16ae RK |
508 | config LOCAL_TIMERS |
509 | bool "Use local timer interrupts" | |
2a98beb6 | 510 | depends on SMP && REALVIEW_MPCORE |
37ee16ae RK |
511 | default y |
512 | help | |
513 | Enable support for local timers on SMP platforms, rather then the | |
514 | legacy IPI broadcast method. Local timers allows the system | |
515 | accounting to be spread across the timer interval, preventing a | |
516 | "thundering herd" at every timer tick. | |
517 | ||
1da177e4 LT |
518 | config PREEMPT |
519 | bool "Preemptible Kernel (EXPERIMENTAL)" | |
520 | depends on EXPERIMENTAL | |
521 | help | |
522 | This option reduces the latency of the kernel when reacting to | |
523 | real-time or interactive events by allowing a low priority process to | |
524 | be preempted even if it is in kernel mode executing a system call. | |
525 | This allows applications to run more reliably even when the system is | |
526 | under load. | |
527 | ||
528 | Say Y here if you are building a kernel for a desktop, embedded | |
529 | or real-time system. Say N if you are unsure. | |
530 | ||
8749af68 RK |
531 | config NO_IDLE_HZ |
532 | bool "Dynamic tick timer" | |
533 | help | |
534 | Select this option if you want to disable continuous timer ticks | |
535 | and have them programmed to occur as required. This option saves | |
536 | power as the system can remain in idle state for longer. | |
537 | ||
538 | By default dynamic tick is disabled during the boot, and can be | |
539 | manually enabled with: | |
540 | ||
541 | echo 1 > /sys/devices/system/timer/timer0/dyn_tick | |
542 | ||
543 | Alternatively, if you want dynamic tick automatically enabled | |
544 | during boot, pass "dyntick=enable" via the kernel command string. | |
545 | ||
f2be64b3 TL |
546 | Please note that dynamic tick may affect the accuracy of |
547 | timekeeping on some platforms depending on the implementation. | |
569d2c34 NP |
548 | Currently at least OMAP, PXA2xx and SA11x0 platforms are known |
549 | to have accurate timekeeping with dynamic tick. | |
f2be64b3 | 550 | |
f8065813 RK |
551 | config HZ |
552 | int | |
553 | default 128 if ARCH_L7200 | |
554 | default 200 if ARCH_EBSA110 || ARCH_S3C2410 | |
bfe65704 | 555 | default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER |
f8065813 RK |
556 | default 100 |
557 | ||
704bdda0 NP |
558 | config AEABI |
559 | bool "Use the ARM EABI to compile the kernel" | |
560 | help | |
561 | This option allows for the kernel to be compiled using the latest | |
562 | ARM ABI (aka EABI). This is only useful if you are using a user | |
563 | space environment that is also compiled with EABI. | |
564 | ||
565 | Since there are major incompatibilities between the legacy ABI and | |
566 | EABI, especially with regard to structure member alignment, this | |
567 | option also changes the kernel syscall calling convention to | |
568 | disambiguate both ABIs and allow for backward compatibility support | |
569 | (selected with CONFIG_OABI_COMPAT). | |
570 | ||
571 | To use this you need GCC version 4.0.0 or later. | |
572 | ||
6c90c872 | 573 | config OABI_COMPAT |
a73a3ff1 | 574 | bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" |
61c484d4 | 575 | depends on AEABI && EXPERIMENTAL |
6c90c872 NP |
576 | default y |
577 | help | |
578 | This option preserves the old syscall interface along with the | |
579 | new (ARM EABI) one. It also provides a compatibility layer to | |
580 | intercept syscalls that have structure arguments which layout | |
581 | in memory differs between the legacy ABI and the new ARM EABI | |
582 | (only for non "thumb" binaries). This option adds a tiny | |
583 | overhead to all syscalls and produces a slightly larger kernel. | |
584 | If you know you'll be using only pure EABI user space then you | |
585 | can say N here. If this option is not selected and you attempt | |
586 | to execute a legacy ABI binary then the result will be | |
587 | UNPREDICTABLE (in fact it can be predicted that it won't work | |
588 | at all). If in doubt say Y. | |
589 | ||
3f22ab27 | 590 | config ARCH_DISCONTIGMEM_ENABLE |
1da177e4 | 591 | bool |
f7e68bbf | 592 | default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM) |
1da177e4 LT |
593 | help |
594 | Say Y to support efficient handling of discontiguous physical memory, | |
595 | for architectures which are either NUMA (Non-Uniform Memory Access) | |
596 | or have huge holes in the physical address space for other reasons. | |
597 | See <file:Documentation/vm/numa> for more. | |
598 | ||
c80d79d7 YG |
599 | config NODES_SHIFT |
600 | int | |
601 | default "4" if ARCH_LH7A40X | |
602 | default "2" | |
603 | depends on NEED_MULTIPLE_NODES | |
604 | ||
3f22ab27 DH |
605 | source "mm/Kconfig" |
606 | ||
1da177e4 LT |
607 | config LEDS |
608 | bool "Timer and CPU usage LEDs" | |
609 | depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \ | |
610 | ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ | |
611 | ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ | |
612 | ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ | |
73a59c1c | 613 | ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ |
58a0cd78 | 614 | ARCH_AT91 || MACH_TRIZEPS4 |
1da177e4 LT |
615 | help |
616 | If you say Y here, the LEDs on your machine will be used | |
617 | to provide useful information about your current system status. | |
618 | ||
619 | If you are compiling a kernel for a NetWinder or EBSA-285, you will | |
620 | be able to select which LEDs are active using the options below. If | |
621 | you are compiling a kernel for the EBSA-110 or the LART however, the | |
622 | red LED will simply flash regularly to indicate that the system is | |
623 | still functional. It is safe to say Y here if you have a CATS | |
624 | system, but the driver will do nothing. | |
625 | ||
626 | config LEDS_TIMER | |
627 | bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \ | |
628 | MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 | |
629 | depends on LEDS | |
630 | default y if ARCH_EBSA110 | |
631 | help | |
632 | If you say Y here, one of the system LEDs (the green one on the | |
633 | NetWinder, the amber one on the EBSA285, or the red one on the LART) | |
634 | will flash regularly to indicate that the system is still | |
635 | operational. This is mainly useful to kernel hackers who are | |
636 | debugging unstable kernels. | |
637 | ||
638 | The LART uses the same LED for both Timer LED and CPU usage LED | |
639 | functions. You may choose to use both, but the Timer LED function | |
640 | will overrule the CPU usage LED. | |
641 | ||
642 | config LEDS_CPU | |
643 | bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \ | |
644 | !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 | |
645 | depends on LEDS | |
646 | help | |
647 | If you say Y here, the red LED will be used to give a good real | |
648 | time indication of CPU usage, by lighting whenever the idle task | |
649 | is not currently executing. | |
650 | ||
651 | The LART uses the same LED for both Timer LED and CPU usage LED | |
652 | functions. You may choose to use both, but the Timer LED function | |
653 | will overrule the CPU usage LED. | |
654 | ||
655 | config ALIGNMENT_TRAP | |
656 | bool | |
f12d0d7c | 657 | depends on CPU_CP15_MMU |
1da177e4 LT |
658 | default y if !ARCH_EBSA110 |
659 | help | |
84eb8d06 | 660 | ARM processors cannot fetch/store information which is not |
1da177e4 LT |
661 | naturally aligned on the bus, i.e., a 4 byte fetch must start at an |
662 | address divisible by 4. On 32-bit ARM processors, these non-aligned | |
663 | fetch/store instructions will be emulated in software if you say | |
664 | here, which has a severe performance impact. This is necessary for | |
665 | correct operation of some network protocols. With an IP-only | |
666 | configuration it is safe to say N, otherwise say Y. | |
667 | ||
668 | endmenu | |
669 | ||
670 | menu "Boot options" | |
671 | ||
672 | # Compressed boot loader in ROM. Yes, we really want to ask about | |
673 | # TEXT and BSS so we preserve their values in the config files. | |
674 | config ZBOOT_ROM_TEXT | |
675 | hex "Compressed ROM boot loader base address" | |
676 | default "0" | |
677 | help | |
678 | The physical address at which the ROM-able zImage is to be | |
679 | placed in the target. Platforms which normally make use of | |
680 | ROM-able zImage formats normally set this to a suitable | |
681 | value in their defconfig file. | |
682 | ||
683 | If ZBOOT_ROM is not enabled, this has no effect. | |
684 | ||
685 | config ZBOOT_ROM_BSS | |
686 | hex "Compressed ROM boot loader BSS address" | |
687 | default "0" | |
688 | help | |
f8c440b2 DF |
689 | The base address of an area of read/write memory in the target |
690 | for the ROM-able zImage which must be available while the | |
691 | decompressor is running. It must be large enough to hold the | |
692 | entire decompressed kernel plus an additional 128 KiB. | |
693 | Platforms which normally make use of ROM-able zImage formats | |
694 | normally set this to a suitable value in their defconfig file. | |
1da177e4 LT |
695 | |
696 | If ZBOOT_ROM is not enabled, this has no effect. | |
697 | ||
698 | config ZBOOT_ROM | |
699 | bool "Compressed boot loader in ROM/flash" | |
700 | depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS | |
701 | help | |
702 | Say Y here if you intend to execute your compressed kernel image | |
703 | (zImage) directly from ROM or flash. If unsure, say N. | |
704 | ||
705 | config CMDLINE | |
706 | string "Default kernel command string" | |
707 | default "" | |
708 | help | |
709 | On some architectures (EBSA110 and CATS), there is currently no way | |
710 | for the boot loader to pass arguments to the kernel. For these | |
711 | architectures, you should supply some command-line options at build | |
712 | time by entering them here. As a minimum, you should specify the | |
713 | memory size and the root device (e.g., mem=64M root=/dev/nfs). | |
714 | ||
715 | config XIP_KERNEL | |
716 | bool "Kernel Execute-In-Place from ROM" | |
717 | depends on !ZBOOT_ROM | |
718 | help | |
719 | Execute-In-Place allows the kernel to run from non-volatile storage | |
720 | directly addressable by the CPU, such as NOR flash. This saves RAM | |
721 | space since the text section of the kernel is not loaded from flash | |
722 | to RAM. Read-write sections, such as the data section and stack, | |
723 | are still copied to RAM. The XIP kernel is not compressed since | |
724 | it has to run directly from flash, so it will take more space to | |
725 | store it. The flash address used to link the kernel object files, | |
726 | and for storing it, is configuration dependent. Therefore, if you | |
727 | say Y here, you must know the proper physical address where to | |
728 | store the kernel image depending on your own flash memory usage. | |
729 | ||
730 | Also note that the make target becomes "make xipImage" rather than | |
731 | "make zImage" or "make Image". The final kernel binary to put in | |
732 | ROM memory will be arch/arm/boot/xipImage. | |
733 | ||
734 | If unsure, say N. | |
735 | ||
736 | config XIP_PHYS_ADDR | |
737 | hex "XIP Kernel Physical Location" | |
738 | depends on XIP_KERNEL | |
739 | default "0x00080000" | |
740 | help | |
741 | This is the physical address in your flash memory the kernel will | |
742 | be linked for and stored to. This address is dependent on your | |
743 | own flash usage. | |
744 | ||
745 | endmenu | |
746 | ||
3c8cd0cc | 747 | if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX ) |
1da177e4 LT |
748 | |
749 | menu "CPU Frequency scaling" | |
750 | ||
751 | source "drivers/cpufreq/Kconfig" | |
752 | ||
753 | config CPU_FREQ_SA1100 | |
754 | bool | |
07c6d48f | 755 | depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT) |
1da177e4 LT |
756 | default y |
757 | ||
758 | config CPU_FREQ_SA1110 | |
759 | bool | |
760 | depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3) | |
761 | default y | |
762 | ||
763 | config CPU_FREQ_INTEGRATOR | |
764 | tristate "CPUfreq driver for ARM Integrator CPUs" | |
765 | depends on ARCH_INTEGRATOR && CPU_FREQ | |
766 | default y | |
767 | help | |
768 | This enables the CPUfreq driver for ARM Integrator CPUs. | |
769 | ||
770 | For details, take a look at <file:Documentation/cpu-freq>. | |
771 | ||
772 | If in doubt, say Y. | |
773 | ||
3c8cd0cc PP |
774 | config CPU_FREQ_IMX |
775 | tristate "CPUfreq driver for i.MX CPUs" | |
776 | depends on ARCH_IMX && CPU_FREQ | |
777 | default n | |
778 | help | |
779 | This enables the CPUfreq driver for i.MX CPUs. | |
780 | ||
781 | If in doubt, say N. | |
782 | ||
1da177e4 LT |
783 | endmenu |
784 | ||
785 | endif | |
786 | ||
787 | menu "Floating point emulation" | |
788 | ||
789 | comment "At least one emulation must be selected" | |
790 | ||
791 | config FPE_NWFPE | |
792 | bool "NWFPE math emulation" | |
8993a44c | 793 | depends on !AEABI || OABI_COMPAT |
1da177e4 LT |
794 | ---help--- |
795 | Say Y to include the NWFPE floating point emulator in the kernel. | |
796 | This is necessary to run most binaries. Linux does not currently | |
797 | support floating point hardware so you need to say Y here even if | |
798 | your machine has an FPA or floating point co-processor podule. | |
799 | ||
800 | You may say N here if you are going to load the Acorn FPEmulator | |
801 | early in the bootup. | |
802 | ||
803 | config FPE_NWFPE_XP | |
804 | bool "Support extended precision" | |
bedf142b | 805 | depends on FPE_NWFPE |
1da177e4 LT |
806 | help |
807 | Say Y to include 80-bit support in the kernel floating-point | |
808 | emulator. Otherwise, only 32 and 64-bit support is compiled in. | |
809 | Note that gcc does not generate 80-bit operations by default, | |
810 | so in most cases this option only enlarges the size of the | |
811 | floating point emulator without any good reason. | |
812 | ||
813 | You almost surely want to say N here. | |
814 | ||
815 | config FPE_FASTFPE | |
816 | bool "FastFPE math emulation (EXPERIMENTAL)" | |
8993a44c | 817 | depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL |
1da177e4 LT |
818 | ---help--- |
819 | Say Y here to include the FAST floating point emulator in the kernel. | |
820 | This is an experimental much faster emulator which now also has full | |
821 | precision for the mantissa. It does not support any exceptions. | |
822 | It is very simple, and approximately 3-6 times faster than NWFPE. | |
823 | ||
824 | It should be sufficient for most programs. It may be not suitable | |
825 | for scientific calculations, but you have to check this for yourself. | |
826 | If you do not feel you need a faster FP emulation you should better | |
827 | choose NWFPE. | |
828 | ||
829 | config VFP | |
830 | bool "VFP-format floating point maths" | |
831 | depends on CPU_V6 || CPU_ARM926T | |
832 | help | |
833 | Say Y to include VFP support code in the kernel. This is needed | |
834 | if your hardware includes a VFP unit. | |
835 | ||
836 | Please see <file:Documentation/arm/VFP/release-notes.txt> for | |
837 | release notes and additional status information. | |
838 | ||
839 | Say N if your target does not have VFP hardware. | |
840 | ||
841 | endmenu | |
842 | ||
843 | menu "Userspace binary formats" | |
844 | ||
845 | source "fs/Kconfig.binfmt" | |
846 | ||
847 | config ARTHUR | |
848 | tristate "RISC OS personality" | |
704bdda0 | 849 | depends on !AEABI |
1da177e4 LT |
850 | help |
851 | Say Y here to include the kernel code necessary if you want to run | |
852 | Acorn RISC OS/Arthur binaries under Linux. This code is still very | |
853 | experimental; if this sounds frightening, say N and sleep in peace. | |
854 | You can also say M here to compile this support as a module (which | |
855 | will be called arthur). | |
856 | ||
857 | endmenu | |
858 | ||
859 | menu "Power management options" | |
860 | ||
eceab4ac | 861 | source "kernel/power/Kconfig" |
1da177e4 | 862 | |
1da177e4 LT |
863 | endmenu |
864 | ||
d5950b43 SR |
865 | source "net/Kconfig" |
866 | ||
1da177e4 LT |
867 | menu "Device Drivers" |
868 | ||
869 | source "drivers/base/Kconfig" | |
870 | ||
c35bf4a5 PM |
871 | source "drivers/connector/Kconfig" |
872 | ||
f12d0d7c | 873 | if ALIGNMENT_TRAP || !CPU_CP15_MMU |
1da177e4 LT |
874 | source "drivers/mtd/Kconfig" |
875 | endif | |
876 | ||
877 | source "drivers/parport/Kconfig" | |
878 | ||
879 | source "drivers/pnp/Kconfig" | |
880 | ||
881 | source "drivers/block/Kconfig" | |
882 | ||
883 | source "drivers/acorn/block/Kconfig" | |
884 | ||
3f7e5815 | 885 | if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \ |
bb011b8e | 886 | || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ |
c4713074 LB |
887 | || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ |
888 | || ARCH_IXP23XX | |
1da177e4 LT |
889 | source "drivers/ide/Kconfig" |
890 | endif | |
891 | ||
892 | source "drivers/scsi/Kconfig" | |
893 | ||
eb370f0b MM |
894 | source "drivers/ata/Kconfig" |
895 | ||
1da177e4 LT |
896 | source "drivers/md/Kconfig" |
897 | ||
898 | source "drivers/message/fusion/Kconfig" | |
899 | ||
900 | source "drivers/ieee1394/Kconfig" | |
901 | ||
902 | source "drivers/message/i2o/Kconfig" | |
903 | ||
d5950b43 | 904 | source "drivers/net/Kconfig" |
1da177e4 LT |
905 | |
906 | source "drivers/isdn/Kconfig" | |
907 | ||
908 | # input before char - char/joystick depends on it. As does USB. | |
909 | ||
910 | source "drivers/input/Kconfig" | |
911 | ||
912 | source "drivers/char/Kconfig" | |
913 | ||
914 | source "drivers/i2c/Kconfig" | |
915 | ||
8ae12a0d DB |
916 | source "drivers/spi/Kconfig" |
917 | ||
04916c0e AZ |
918 | source "drivers/w1/Kconfig" |
919 | ||
ad2f931d JD |
920 | source "drivers/hwmon/Kconfig" |
921 | ||
1da177e4 LT |
922 | #source "drivers/l3/Kconfig" |
923 | ||
924 | source "drivers/misc/Kconfig" | |
925 | ||
a4e137ab RK |
926 | source "drivers/mfd/Kconfig" |
927 | ||
c72a1d60 RP |
928 | source "drivers/leds/Kconfig" |
929 | ||
1da177e4 LT |
930 | source "drivers/media/Kconfig" |
931 | ||
932 | source "drivers/video/Kconfig" | |
933 | ||
934 | source "sound/Kconfig" | |
935 | ||
c2dade51 SH |
936 | source "drivers/hid/Kconfig" |
937 | ||
1da177e4 LT |
938 | source "drivers/usb/Kconfig" |
939 | ||
940 | source "drivers/mmc/Kconfig" | |
941 | ||
12b824fb AZ |
942 | source "drivers/rtc/Kconfig" |
943 | ||
1da177e4 LT |
944 | endmenu |
945 | ||
946 | source "fs/Kconfig" | |
947 | ||
948 | source "arch/arm/oprofile/Kconfig" | |
949 | ||
950 | source "arch/arm/Kconfig.debug" | |
951 | ||
952 | source "security/Kconfig" | |
953 | ||
954 | source "crypto/Kconfig" | |
955 | ||
956 | source "lib/Kconfig" |