]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # For a description of the syntax of this configuration file, | |
3 | # see Documentation/kbuild/kconfig-language.txt. | |
4 | # | |
5 | ||
6 | mainmenu "Linux Kernel Configuration" | |
7 | ||
8 | config ARM | |
9 | bool | |
10 | default y | |
12b824fb | 11 | select RTC_LIB |
75e7153a | 12 | select SYS_SUPPORTS_APM_EMULATION |
42d4b839 | 13 | select HAVE_OPROFILE |
3f550096 | 14 | select HAVE_KPROBES if (!XIP_KERNEL) |
1da177e4 LT |
15 | help |
16 | The ARM series is a line of low-power-consumption RISC chip designs | |
f6c8965a | 17 | licensed by ARM Ltd and targeted at embedded applications and |
1da177e4 | 18 | handhelds such as the Compaq IPAQ. ARM-based PCs are no longer |
f6c8965a | 19 | manufactured, but legacy ARM-based PC hardware remains popular in |
1da177e4 LT |
20 | Europe. There is an ARM Linux project with a web page at |
21 | <http://www.arm.linux.org.uk/>. | |
22 | ||
75e7153a RB |
23 | config SYS_SUPPORTS_APM_EMULATION |
24 | bool | |
25 | ||
0a938b97 DB |
26 | config GENERIC_GPIO |
27 | bool | |
28 | default n | |
29 | ||
746140c7 KH |
30 | config GENERIC_TIME |
31 | bool | |
32 | default n | |
33 | ||
0567a0c0 KH |
34 | config GENERIC_CLOCKEVENTS |
35 | bool | |
36 | default n | |
37 | ||
a8655e83 CM |
38 | config GENERIC_CLOCKEVENTS_BROADCAST |
39 | bool | |
40 | depends on GENERIC_CLOCKEVENTS | |
41 | default y if SMP && !LOCAL_TIMERS | |
42 | ||
1da177e4 LT |
43 | config MMU |
44 | bool | |
45 | default y | |
46 | ||
5ea81769 AV |
47 | config NO_IOPORT |
48 | bool | |
49 | default n | |
50 | ||
1da177e4 LT |
51 | config EISA |
52 | bool | |
53 | ---help--- | |
54 | The Extended Industry Standard Architecture (EISA) bus was | |
55 | developed as an open alternative to the IBM MicroChannel bus. | |
56 | ||
57 | The EISA bus provided some of the features of the IBM MicroChannel | |
58 | bus while maintaining backward compatibility with cards made for | |
59 | the older ISA bus. The EISA bus saw limited use between 1988 and | |
60 | 1995 when it was made obsolete by the PCI bus. | |
61 | ||
62 | Say Y here if you are building a kernel for an EISA-based machine. | |
63 | ||
64 | Otherwise, say N. | |
65 | ||
66 | config SBUS | |
67 | bool | |
68 | ||
69 | config MCA | |
70 | bool | |
71 | help | |
72 | MicroChannel Architecture is found in some IBM PS/2 machines and | |
73 | laptops. It is a bus system similar to PCI or ISA. See | |
74 | <file:Documentation/mca.txt> (and especially the web page given | |
75 | there) before attempting to build an MCA bus kernel. | |
76 | ||
4a2581a0 TG |
77 | config GENERIC_HARDIRQS |
78 | bool | |
79 | default y | |
80 | ||
f16fb1ec RK |
81 | config STACKTRACE_SUPPORT |
82 | bool | |
83 | default y | |
84 | ||
85 | config LOCKDEP_SUPPORT | |
86 | bool | |
87 | default y | |
88 | ||
7ad1bcb2 RK |
89 | config TRACE_IRQFLAGS_SUPPORT |
90 | bool | |
91 | default y | |
92 | ||
4a2581a0 TG |
93 | config HARDIRQS_SW_RESEND |
94 | bool | |
95 | default y | |
96 | ||
97 | config GENERIC_IRQ_PROBE | |
98 | bool | |
99 | default y | |
100 | ||
95c354fe NP |
101 | config GENERIC_LOCKBREAK |
102 | bool | |
103 | default y | |
104 | depends on SMP && PREEMPT | |
105 | ||
1da177e4 LT |
106 | config RWSEM_GENERIC_SPINLOCK |
107 | bool | |
108 | default y | |
109 | ||
110 | config RWSEM_XCHGADD_ALGORITHM | |
111 | bool | |
112 | ||
f0d1b0b3 DH |
113 | config ARCH_HAS_ILOG2_U32 |
114 | bool | |
115 | default n | |
116 | ||
117 | config ARCH_HAS_ILOG2_U64 | |
118 | bool | |
119 | default n | |
120 | ||
b89c3b16 AM |
121 | config GENERIC_HWEIGHT |
122 | bool | |
123 | default y | |
124 | ||
1da177e4 LT |
125 | config GENERIC_CALIBRATE_DELAY |
126 | bool | |
127 | default y | |
128 | ||
b0b933c0 DH |
129 | config ARCH_SUPPORTS_AOUT |
130 | def_bool y | |
131 | ||
a08b6b79 AV |
132 | config ARCH_MAY_HAVE_PC_FDC |
133 | bool | |
134 | ||
5ac6da66 CL |
135 | config ZONE_DMA |
136 | bool | |
137 | default y | |
138 | ||
1da177e4 LT |
139 | config GENERIC_ISA_DMA |
140 | bool | |
141 | ||
1da177e4 LT |
142 | config FIQ |
143 | bool | |
144 | ||
034d2f5a AV |
145 | config ARCH_MTD_XIP |
146 | bool | |
147 | ||
c0ffa3a9 MD |
148 | if OPROFILE |
149 | ||
150 | config OPROFILE_ARMV6 | |
151 | def_bool y | |
152 | depends on CPU_V6 && !SMP | |
153 | select OPROFILE_ARM11_CORE | |
154 | ||
155 | config OPROFILE_MPCORE | |
156 | def_bool y | |
157 | depends on CPU_V6 && SMP | |
158 | select OPROFILE_ARM11_CORE | |
159 | ||
160 | config OPROFILE_ARM11_CORE | |
161 | bool | |
162 | ||
163 | endif | |
164 | ||
c760fc19 HC |
165 | config VECTORS_BASE |
166 | hex | |
6afd6fae | 167 | default 0xffff0000 if MMU || CPU_HIGH_VECTOR |
c760fc19 HC |
168 | default DRAM_BASE if REMAP_VECTORS_TO_RAM |
169 | default 0x00000000 | |
170 | help | |
171 | The base address of exception vectors. | |
172 | ||
1da177e4 LT |
173 | source "init/Kconfig" |
174 | ||
175 | menu "System Type" | |
176 | ||
177 | choice | |
178 | prompt "ARM system type" | |
6a0e2430 | 179 | default ARCH_VERSATILE |
1da177e4 | 180 | |
4af6fee1 DS |
181 | config ARCH_AAEC2000 |
182 | bool "Agilent AAEC-2000 based" | |
183 | select ARM_AMBA | |
184 | help | |
185 | This enables support for systems based on the Agilent AAEC-2000 | |
186 | ||
187 | config ARCH_INTEGRATOR | |
188 | bool "ARM Ltd. Integrator family" | |
189 | select ARM_AMBA | |
190 | select ICST525 | |
191 | help | |
192 | Support for ARM's Integrator platform. | |
193 | ||
194 | config ARCH_REALVIEW | |
195 | bool "ARM Ltd. RealView family" | |
196 | select ARM_AMBA | |
197 | select ICST307 | |
85802afe | 198 | select GENERIC_TIME |
ae30ceac | 199 | select GENERIC_CLOCKEVENTS |
4af6fee1 DS |
200 | help |
201 | This enables support for ARM Ltd RealView boards. | |
202 | ||
203 | config ARCH_VERSATILE | |
204 | bool "ARM Ltd. Versatile family" | |
205 | select ARM_AMBA | |
206 | select ARM_VIC | |
207 | select ICST307 | |
b49c87c2 | 208 | select GENERIC_TIME |
89df1272 | 209 | select GENERIC_CLOCKEVENTS |
4af6fee1 DS |
210 | help |
211 | This enables support for ARM Ltd Versatile board. | |
212 | ||
8fc5ffa0 AV |
213 | config ARCH_AT91 |
214 | bool "Atmel AT91" | |
0a938b97 | 215 | select GENERIC_GPIO |
4af6fee1 | 216 | help |
2b3b3516 AV |
217 | This enables support for systems based on the Atmel AT91RM9200, |
218 | AT91SAM9 and AT91CAP9 processors. | |
4af6fee1 | 219 | |
1da177e4 | 220 | config ARCH_CLPS7500 |
4af6fee1 | 221 | bool "Cirrus CL-PS7500FE" |
1da177e4 | 222 | select TIMER_ACORN |
f7e68bbf | 223 | select ISA |
e4169889 | 224 | select NO_IOPORT |
ec7748b5 | 225 | select HAVE_IDE |
f999b8bd MM |
226 | help |
227 | Support for the Cirrus Logic PS7500FE system-on-a-chip. | |
1da177e4 LT |
228 | |
229 | config ARCH_CLPS711X | |
4af6fee1 | 230 | bool "Cirrus Logic CLPS711x/EP721x-based" |
f999b8bd MM |
231 | help |
232 | Support for Cirrus Logic 711x/721x based boards. | |
1da177e4 LT |
233 | |
234 | config ARCH_CO285 | |
235 | bool "Co-EBSA285" | |
236 | select FOOTBRIDGE | |
237 | select FOOTBRIDGE_ADDIN | |
ec7748b5 | 238 | select HAVE_IDE |
f999b8bd MM |
239 | help |
240 | Support for Intel's EBSA285 companion chip. | |
1da177e4 LT |
241 | |
242 | config ARCH_EBSA110 | |
243 | bool "EBSA-110" | |
f7e68bbf | 244 | select ISA |
c5eb2a2b | 245 | select NO_IOPORT |
1da177e4 LT |
246 | help |
247 | This is an evaluation board for the StrongARM processor available | |
f6c8965a | 248 | from Digital. It has limited hardware on-board, including an |
1da177e4 LT |
249 | Ethernet interface, two PCMCIA sockets, two serial ports and a |
250 | parallel port. | |
251 | ||
e7736d47 LB |
252 | config ARCH_EP93XX |
253 | bool "EP93xx-based" | |
254 | select ARM_AMBA | |
255 | select ARM_VIC | |
4e9f9fd5 | 256 | select GENERIC_GPIO |
e7736d47 LB |
257 | help |
258 | This enables support for the Cirrus EP93xx series of CPUs. | |
259 | ||
1da177e4 LT |
260 | config ARCH_FOOTBRIDGE |
261 | bool "FootBridge" | |
262 | select FOOTBRIDGE | |
ec7748b5 | 263 | select HAVE_IDE |
f999b8bd MM |
264 | help |
265 | Support for systems based on the DC21285 companion chip | |
266 | ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. | |
1da177e4 | 267 | |
4af6fee1 DS |
268 | config ARCH_NETX |
269 | bool "Hilscher NetX based" | |
270 | select ARM_VIC | |
f999b8bd | 271 | help |
4af6fee1 DS |
272 | This enables support for systems based on the Hilscher NetX Soc |
273 | ||
274 | config ARCH_H720X | |
275 | bool "Hynix HMS720x-based" | |
276 | select ISA_DMA_API | |
277 | help | |
278 | This enables support for systems based on the Hynix HMS720x | |
279 | ||
280 | config ARCH_IMX | |
281 | bool "IMX" | |
b3e6a508 | 282 | select GENERIC_GPIO |
89bba435 PP |
283 | select GENERIC_TIME |
284 | select GENERIC_CLOCKEVENTS | |
4af6fee1 DS |
285 | help |
286 | Support for Motorola's i.MX family of processors (MX1, MXL). | |
1da177e4 | 287 | |
3b938be6 RK |
288 | config ARCH_IOP13XX |
289 | bool "IOP13xx-based" | |
290 | depends on MMU | |
291 | select PLAT_IOP | |
292 | select PCI | |
293 | select ARCH_SUPPORTS_MSI | |
294 | help | |
295 | Support for Intel's IOP13XX (XScale) family of processors. | |
296 | ||
3f7e5815 LB |
297 | config ARCH_IOP32X |
298 | bool "IOP32x-based" | |
a4f7e763 | 299 | depends on MMU |
7ae1f7ec | 300 | select PLAT_IOP |
f7e68bbf | 301 | select PCI |
ec7748b5 | 302 | select HAVE_IDE |
f999b8bd | 303 | help |
3f7e5815 LB |
304 | Support for Intel's 80219 and IOP32X (XScale) family of |
305 | processors. | |
306 | ||
307 | config ARCH_IOP33X | |
308 | bool "IOP33x-based" | |
309 | depends on MMU | |
7ae1f7ec | 310 | select PLAT_IOP |
3f7e5815 | 311 | select PCI |
ec7748b5 | 312 | select HAVE_IDE |
3f7e5815 LB |
313 | help |
314 | Support for Intel's IOP33X (XScale) family of processors. | |
1da177e4 | 315 | |
3b938be6 RK |
316 | config ARCH_IXP23XX |
317 | bool "IXP23XX-based" | |
a4f7e763 | 318 | depends on MMU |
ec7748b5 | 319 | select HAVE_IDE |
3b938be6 | 320 | select PCI |
f999b8bd | 321 | help |
3b938be6 | 322 | Support for Intel's IXP23xx (XScale) family of processors. |
1da177e4 LT |
323 | |
324 | config ARCH_IXP2000 | |
325 | bool "IXP2400/2800-based" | |
a4f7e763 | 326 | depends on MMU |
f7e68bbf | 327 | select PCI |
f999b8bd MM |
328 | help |
329 | Support for Intel's IXP2400/2800 (XScale) family of processors. | |
1da177e4 | 330 | |
3b938be6 RK |
331 | config ARCH_IXP4XX |
332 | bool "IXP4xx-based" | |
a4f7e763 | 333 | depends on MMU |
8858e9af | 334 | select GENERIC_GPIO |
3b938be6 RK |
335 | select GENERIC_TIME |
336 | select GENERIC_CLOCKEVENTS | |
ec7748b5 | 337 | select HAVE_IDE |
c4713074 | 338 | help |
3b938be6 | 339 | Support for Intel's IXP4XX (XScale) family of processors. |
c4713074 | 340 | |
1da177e4 LT |
341 | config ARCH_L7200 |
342 | bool "LinkUp-L7200" | |
343 | select FIQ | |
ec7748b5 | 344 | select HAVE_IDE |
1da177e4 LT |
345 | help |
346 | Say Y here if you intend to run this kernel on a LinkUp Systems | |
347 | L7200 Software Development Board which uses an ARM720T processor. | |
348 | Information on this board can be obtained at: | |
349 | ||
350 | <http://www.linkupsys.com/> | |
351 | ||
352 | If you have any questions or comments about the Linux kernel port | |
353 | to this board, send e-mail to <sjhill@cotw.com>. | |
354 | ||
c53c9cf6 AV |
355 | config ARCH_KS8695 |
356 | bool "Micrel/Kendin KS8695" | |
8a87a996 | 357 | select GENERIC_GPIO |
c53c9cf6 AV |
358 | help |
359 | Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based | |
360 | System-on-Chip devices. | |
361 | ||
9918cda5 UKK |
362 | config ARCH_NS9XXX |
363 | bool "NetSilicon NS9xxx" | |
689f2a01 | 364 | select GENERIC_GPIO |
cef5975d | 365 | select GENERIC_TIME |
c0bb87f7 | 366 | select GENERIC_CLOCKEVENTS |
9918cda5 UKK |
367 | help |
368 | Say Y here if you intend to run this kernel on a NetSilicon NS9xxx | |
369 | System. | |
370 | ||
371 | <http://www.digi.com/products/microprocessors/index.jsp> | |
372 | ||
52c543f9 QJ |
373 | config ARCH_MXC |
374 | bool "Freescale MXC/iMX-based" | |
375 | select ARCH_MTD_XIP | |
376 | help | |
377 | Support for Freescale MXC/iMX-based family of processors | |
378 | ||
585cf175 TP |
379 | config ARCH_ORION |
380 | bool "Marvell Orion" | |
381 | depends on MMU | |
038ee083 | 382 | select PCI |
01af72e4 | 383 | select GENERIC_GPIO |
51cbff1d TP |
384 | select GENERIC_TIME |
385 | select GENERIC_CLOCKEVENTS | |
585cf175 TP |
386 | help |
387 | Support for Marvell Orion System on Chip family. | |
388 | ||
4af6fee1 DS |
389 | config ARCH_PNX4008 |
390 | bool "Philips Nexperia PNX4008 Mobile" | |
391 | help | |
392 | This enables support for Philips PNX4008 mobile platform. | |
393 | ||
1da177e4 | 394 | config ARCH_PXA |
2c8086a5 | 395 | bool "PXA2xx/PXA3xx-based" |
a4f7e763 | 396 | depends on MMU |
034d2f5a | 397 | select ARCH_MTD_XIP |
0a938b97 | 398 | select GENERIC_GPIO |
ec7748b5 | 399 | select HAVE_IDE |
1c44f5f1 | 400 | select HAVE_GPIO_LIB |
45cf5eef | 401 | select GENERIC_TIME |
981d0f39 | 402 | select GENERIC_CLOCKEVENTS |
a88264c2 | 403 | select TICK_ONESHOT |
f999b8bd | 404 | help |
2c8086a5 | 405 | Support for Intel/Marvell's PXA2xx/PXA3xx processor line. |
1da177e4 LT |
406 | |
407 | config ARCH_RPC | |
408 | bool "RiscPC" | |
409 | select ARCH_ACORN | |
410 | select FIQ | |
411 | select TIMER_ACORN | |
a08b6b79 | 412 | select ARCH_MAY_HAVE_PC_FDC |
065909b9 | 413 | select ISA_DMA_API |
5ea81769 | 414 | select NO_IOPORT |
ec7748b5 | 415 | select HAVE_IDE |
1da177e4 LT |
416 | help |
417 | On the Acorn Risc-PC, Linux can support the internal IDE disk and | |
418 | CD-ROM interface, serial and parallel port, and the floppy drive. | |
419 | ||
420 | config ARCH_SA1100 | |
421 | bool "SA1100-based" | |
f7e68bbf | 422 | select ISA |
3cd9e19e | 423 | select ARCH_DISCONTIGMEM_ENABLE |
034d2f5a | 424 | select ARCH_MTD_XIP |
0a938b97 | 425 | select GENERIC_GPIO |
d142b6e7 | 426 | select GENERIC_TIME |
ec7748b5 | 427 | select HAVE_IDE |
f999b8bd MM |
428 | help |
429 | Support for StrongARM 11x0 based boards. | |
1da177e4 LT |
430 | |
431 | config ARCH_S3C2410 | |
e4d06e39 | 432 | bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" |
0a938b97 | 433 | select GENERIC_GPIO |
ec7748b5 | 434 | select HAVE_IDE |
1da177e4 LT |
435 | help |
436 | Samsung S3C2410X CPU based systems, such as the Simtec Electronics | |
437 | BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or | |
f6c8965a | 438 | the Samsung SMDK2410 development board (and derivatives). |
1da177e4 LT |
439 | |
440 | config ARCH_SHARK | |
441 | bool "Shark" | |
ec7748b5 | 442 | select HAVE_IDE |
f7e68bbf RK |
443 | select ISA |
444 | select ISA_DMA | |
445 | select PCI | |
f999b8bd MM |
446 | help |
447 | Support for the StrongARM based Digital DNARD machine, also known | |
448 | as "Shark" (<http://www.shark-linux.de/shark.html>). | |
1da177e4 LT |
449 | |
450 | config ARCH_LH7A40X | |
451 | bool "Sharp LH7A40X" | |
ec7748b5 | 452 | select HAVE_IDE |
1da177e4 LT |
453 | help |
454 | Say Y here for systems based on one of the Sharp LH7A40X | |
455 | System on a Chip processors. These CPUs include an ARM922T | |
456 | core with a wide array of integrated devices for | |
457 | hand-held and low-power applications. | |
458 | ||
7c6337e2 KH |
459 | config ARCH_DAVINCI |
460 | bool "TI DaVinci" | |
461 | select GENERIC_TIME | |
462 | select GENERIC_CLOCKEVENTS | |
3d9edf09 | 463 | select GENERIC_GPIO |
7c6337e2 KH |
464 | help |
465 | Support for TI's DaVinci platform. | |
466 | ||
3b938be6 RK |
467 | config ARCH_OMAP |
468 | bool "TI OMAP" | |
469 | select GENERIC_GPIO | |
470 | select GENERIC_TIME | |
471 | help | |
472 | Support for TI's OMAP platform (OMAP1 and OMAP2). | |
473 | ||
3042102a BS |
474 | config ARCH_MSM7X00A |
475 | bool "Qualcomm MSM7X00A" | |
476 | select GENERIC_TIME | |
477 | select GENERIC_CLOCKEVENTS | |
478 | help | |
479 | Support for Qualcomm MSM7X00A based systems. This runs on the ARM11 | |
480 | apps processor of the MSM7X00A and depends on a shared memory | |
481 | interface to the ARM9 modem processor which runs the baseband stack | |
482 | and controls some vital subsystems (clock and power control, etc). | |
483 | <http://www.cdmatech.com/products/msm7200_chipset_solution.jsp> | |
484 | ||
1da177e4 LT |
485 | endchoice |
486 | ||
487 | source "arch/arm/mach-clps711x/Kconfig" | |
488 | ||
e7736d47 LB |
489 | source "arch/arm/mach-ep93xx/Kconfig" |
490 | ||
1da177e4 LT |
491 | source "arch/arm/mach-footbridge/Kconfig" |
492 | ||
493 | source "arch/arm/mach-integrator/Kconfig" | |
494 | ||
3f7e5815 LB |
495 | source "arch/arm/mach-iop32x/Kconfig" |
496 | ||
497 | source "arch/arm/mach-iop33x/Kconfig" | |
1da177e4 | 498 | |
285f5fa7 DW |
499 | source "arch/arm/mach-iop13xx/Kconfig" |
500 | ||
1da177e4 LT |
501 | source "arch/arm/mach-ixp4xx/Kconfig" |
502 | ||
503 | source "arch/arm/mach-ixp2000/Kconfig" | |
504 | ||
c4713074 LB |
505 | source "arch/arm/mach-ixp23xx/Kconfig" |
506 | ||
1da177e4 LT |
507 | source "arch/arm/mach-pxa/Kconfig" |
508 | ||
509 | source "arch/arm/mach-sa1100/Kconfig" | |
510 | ||
d48af15e TL |
511 | source "arch/arm/plat-omap/Kconfig" |
512 | ||
513 | source "arch/arm/mach-omap1/Kconfig" | |
1da177e4 | 514 | |
1dbae815 TL |
515 | source "arch/arm/mach-omap2/Kconfig" |
516 | ||
585cf175 TP |
517 | source "arch/arm/mach-orion/Kconfig" |
518 | ||
a21765a7 | 519 | source "arch/arm/plat-s3c24xx/Kconfig" |
d58153d8 | 520 | source "arch/arm/plat-s3c/Kconfig" |
a21765a7 BD |
521 | |
522 | if ARCH_S3C2410 | |
523 | source "arch/arm/mach-s3c2400/Kconfig" | |
1da177e4 | 524 | source "arch/arm/mach-s3c2410/Kconfig" |
a21765a7 BD |
525 | source "arch/arm/mach-s3c2412/Kconfig" |
526 | source "arch/arm/mach-s3c2440/Kconfig" | |
527 | source "arch/arm/mach-s3c2442/Kconfig" | |
e4d06e39 | 528 | source "arch/arm/mach-s3c2443/Kconfig" |
a21765a7 | 529 | endif |
1da177e4 LT |
530 | |
531 | source "arch/arm/mach-lh7a40x/Kconfig" | |
532 | ||
533 | source "arch/arm/mach-imx/Kconfig" | |
534 | ||
535 | source "arch/arm/mach-h720x/Kconfig" | |
536 | ||
537 | source "arch/arm/mach-versatile/Kconfig" | |
538 | ||
038c5b60 BN |
539 | source "arch/arm/mach-aaec2000/Kconfig" |
540 | ||
8ad68bbf CM |
541 | source "arch/arm/mach-realview/Kconfig" |
542 | ||
9d041268 | 543 | source "arch/arm/mach-at91/Kconfig" |
73a59c1c | 544 | |
52c543f9 QJ |
545 | source "arch/arm/plat-mxc/Kconfig" |
546 | ||
bb6d8c88 SH |
547 | source "arch/arm/mach-netx/Kconfig" |
548 | ||
9918cda5 UKK |
549 | source "arch/arm/mach-ns9xxx/Kconfig" |
550 | ||
7c6337e2 KH |
551 | source "arch/arm/mach-davinci/Kconfig" |
552 | ||
c53c9cf6 AV |
553 | source "arch/arm/mach-ks8695/Kconfig" |
554 | ||
9e73c84c BS |
555 | source "arch/arm/mach-msm/Kconfig" |
556 | ||
1da177e4 LT |
557 | # Definitions to make life easier |
558 | config ARCH_ACORN | |
559 | bool | |
560 | ||
7ae1f7ec LB |
561 | config PLAT_IOP |
562 | bool | |
563 | ||
1da177e4 LT |
564 | source arch/arm/mm/Kconfig |
565 | ||
afe4b25e LB |
566 | config IWMMXT |
567 | bool "Enable iWMMXt support" | |
6340aa61 | 568 | depends on CPU_XSCALE || CPU_XSC3 |
2c8086a5 | 569 | default y if PXA27x || PXA3xx |
afe4b25e LB |
570 | help |
571 | Enable support for iWMMXt context switching at run time if | |
572 | running on a CPU that supports it. | |
573 | ||
1da177e4 LT |
574 | # bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER |
575 | config XSCALE_PMU | |
576 | bool | |
577 | depends on CPU_XSCALE && !XSCALE_PMU_TIMER | |
578 | default y | |
579 | ||
3b93e7b0 HC |
580 | if !MMU |
581 | source "arch/arm/Kconfig-nommu" | |
582 | endif | |
583 | ||
1da177e4 LT |
584 | endmenu |
585 | ||
586 | source "arch/arm/common/Kconfig" | |
587 | ||
588 | config FORCE_MAX_ZONEORDER | |
589 | int | |
590 | depends on SA1111 | |
591 | default "9" | |
592 | ||
593 | menu "Bus support" | |
594 | ||
595 | config ARM_AMBA | |
596 | bool | |
597 | ||
598 | config ISA | |
599 | bool | |
1da177e4 LT |
600 | help |
601 | Find out whether you have ISA slots on your motherboard. ISA is the | |
602 | name of a bus system, i.e. the way the CPU talks to the other stuff | |
603 | inside your box. Other bus systems are PCI, EISA, MicroChannel | |
604 | (MCA) or VESA. ISA is an older system, now being displaced by PCI; | |
605 | newer boards don't support it. If you have ISA, say Y, otherwise N. | |
606 | ||
065909b9 | 607 | # Select ISA DMA controller support |
1da177e4 LT |
608 | config ISA_DMA |
609 | bool | |
065909b9 | 610 | select ISA_DMA_API |
1da177e4 | 611 | |
065909b9 | 612 | # Select ISA DMA interface |
5cae841b AV |
613 | config ISA_DMA_API |
614 | bool | |
5cae841b | 615 | |
1da177e4 | 616 | config PCI |
a0113a99 | 617 | bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE |
1da177e4 LT |
618 | help |
619 | Find out whether you have a PCI motherboard. PCI is the name of a | |
620 | bus system, i.e. the way the CPU talks to the other stuff inside | |
621 | your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or | |
622 | VESA. If you have PCI, say Y, otherwise N. | |
623 | ||
36e23590 MW |
624 | config PCI_SYSCALL |
625 | def_bool PCI | |
626 | ||
1da177e4 LT |
627 | # Select the host bridge type |
628 | config PCI_HOST_VIA82C505 | |
629 | bool | |
630 | depends on PCI && ARCH_SHARK | |
631 | default y | |
632 | ||
a0113a99 MR |
633 | config PCI_HOST_ITE8152 |
634 | bool | |
635 | depends on PCI && MACH_ARMCORE | |
636 | default y | |
637 | select DMABOUNCE | |
638 | ||
1da177e4 LT |
639 | source "drivers/pci/Kconfig" |
640 | ||
641 | source "drivers/pcmcia/Kconfig" | |
642 | ||
643 | endmenu | |
644 | ||
645 | menu "Kernel Features" | |
646 | ||
0567a0c0 KH |
647 | source "kernel/time/Kconfig" |
648 | ||
1da177e4 LT |
649 | config SMP |
650 | bool "Symmetric Multi-Processing (EXPERIMENTAL)" | |
41579f49 | 651 | depends on EXPERIMENTAL && REALVIEW_EB_ARM11MP |
1da177e4 LT |
652 | help |
653 | This enables support for systems with more than one CPU. If you have | |
654 | a system with only one CPU, like most personal computers, say N. If | |
655 | you have a system with more than one CPU, say Y. | |
656 | ||
657 | If you say N here, the kernel will run on single and multiprocessor | |
658 | machines, but will use only one CPU of a multiprocessor machine. If | |
659 | you say Y here, the kernel will run on many, but not all, single | |
660 | processor machines. On a single processor machine, the kernel will | |
661 | run faster if you say N here. | |
662 | ||
03502faa | 663 | See also <file:Documentation/i386/IO-APIC.txt>, |
1da177e4 LT |
664 | <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at |
665 | <http://www.linuxdoc.org/docs.html#howto>. | |
666 | ||
667 | If you don't know what to do here, say N. | |
668 | ||
669 | config NR_CPUS | |
670 | int "Maximum number of CPUs (2-32)" | |
671 | range 2 32 | |
672 | depends on SMP | |
673 | default "4" | |
674 | ||
a054a811 RK |
675 | config HOTPLUG_CPU |
676 | bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" | |
677 | depends on SMP && HOTPLUG && EXPERIMENTAL | |
678 | help | |
679 | Say Y here to experiment with turning CPUs off and on. CPUs | |
680 | can be controlled through /sys/devices/system/cpu. | |
681 | ||
37ee16ae RK |
682 | config LOCAL_TIMERS |
683 | bool "Use local timer interrupts" | |
41579f49 | 684 | depends on SMP && REALVIEW_EB_ARM11MP |
37ee16ae RK |
685 | default y |
686 | help | |
687 | Enable support for local timers on SMP platforms, rather then the | |
688 | legacy IPI broadcast method. Local timers allows the system | |
689 | accounting to be spread across the timer interval, preventing a | |
690 | "thundering herd" at every timer tick. | |
691 | ||
1da177e4 LT |
692 | config PREEMPT |
693 | bool "Preemptible Kernel (EXPERIMENTAL)" | |
694 | depends on EXPERIMENTAL | |
695 | help | |
696 | This option reduces the latency of the kernel when reacting to | |
697 | real-time or interactive events by allowing a low priority process to | |
698 | be preempted even if it is in kernel mode executing a system call. | |
699 | This allows applications to run more reliably even when the system is | |
700 | under load. | |
701 | ||
702 | Say Y here if you are building a kernel for a desktop, embedded | |
703 | or real-time system. Say N if you are unsure. | |
704 | ||
8749af68 RK |
705 | config NO_IDLE_HZ |
706 | bool "Dynamic tick timer" | |
0567a0c0 | 707 | depends on !GENERIC_CLOCKEVENTS |
8749af68 RK |
708 | help |
709 | Select this option if you want to disable continuous timer ticks | |
710 | and have them programmed to occur as required. This option saves | |
711 | power as the system can remain in idle state for longer. | |
712 | ||
713 | By default dynamic tick is disabled during the boot, and can be | |
714 | manually enabled with: | |
715 | ||
716 | echo 1 > /sys/devices/system/timer/timer0/dyn_tick | |
717 | ||
718 | Alternatively, if you want dynamic tick automatically enabled | |
719 | during boot, pass "dyntick=enable" via the kernel command string. | |
720 | ||
f2be64b3 TL |
721 | Please note that dynamic tick may affect the accuracy of |
722 | timekeeping on some platforms depending on the implementation. | |
569d2c34 NP |
723 | Currently at least OMAP, PXA2xx and SA11x0 platforms are known |
724 | to have accurate timekeeping with dynamic tick. | |
f2be64b3 | 725 | |
f8065813 RK |
726 | config HZ |
727 | int | |
728 | default 128 if ARCH_L7200 | |
729 | default 200 if ARCH_EBSA110 || ARCH_S3C2410 | |
bfe65704 | 730 | default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER |
5248c657 | 731 | default AT91_TIMER_HZ if ARCH_AT91 |
f8065813 RK |
732 | default 100 |
733 | ||
704bdda0 NP |
734 | config AEABI |
735 | bool "Use the ARM EABI to compile the kernel" | |
736 | help | |
737 | This option allows for the kernel to be compiled using the latest | |
738 | ARM ABI (aka EABI). This is only useful if you are using a user | |
739 | space environment that is also compiled with EABI. | |
740 | ||
741 | Since there are major incompatibilities between the legacy ABI and | |
742 | EABI, especially with regard to structure member alignment, this | |
743 | option also changes the kernel syscall calling convention to | |
744 | disambiguate both ABIs and allow for backward compatibility support | |
745 | (selected with CONFIG_OABI_COMPAT). | |
746 | ||
747 | To use this you need GCC version 4.0.0 or later. | |
748 | ||
6c90c872 | 749 | config OABI_COMPAT |
a73a3ff1 | 750 | bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" |
61c484d4 | 751 | depends on AEABI && EXPERIMENTAL |
6c90c872 NP |
752 | default y |
753 | help | |
754 | This option preserves the old syscall interface along with the | |
755 | new (ARM EABI) one. It also provides a compatibility layer to | |
756 | intercept syscalls that have structure arguments which layout | |
757 | in memory differs between the legacy ABI and the new ARM EABI | |
758 | (only for non "thumb" binaries). This option adds a tiny | |
759 | overhead to all syscalls and produces a slightly larger kernel. | |
760 | If you know you'll be using only pure EABI user space then you | |
761 | can say N here. If this option is not selected and you attempt | |
762 | to execute a legacy ABI binary then the result will be | |
763 | UNPREDICTABLE (in fact it can be predicted that it won't work | |
764 | at all). If in doubt say Y. | |
765 | ||
3f22ab27 | 766 | config ARCH_DISCONTIGMEM_ENABLE |
1da177e4 | 767 | bool |
f7e68bbf | 768 | default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM) |
1da177e4 LT |
769 | help |
770 | Say Y to support efficient handling of discontiguous physical memory, | |
771 | for architectures which are either NUMA (Non-Uniform Memory Access) | |
772 | or have huge holes in the physical address space for other reasons. | |
773 | See <file:Documentation/vm/numa> for more. | |
774 | ||
c80d79d7 YG |
775 | config NODES_SHIFT |
776 | int | |
777 | default "4" if ARCH_LH7A40X | |
778 | default "2" | |
779 | depends on NEED_MULTIPLE_NODES | |
780 | ||
3f22ab27 DH |
781 | source "mm/Kconfig" |
782 | ||
1da177e4 LT |
783 | config LEDS |
784 | bool "Timer and CPU usage LEDs" | |
785 | depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \ | |
786 | ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ | |
787 | ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ | |
788 | ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ | |
73a59c1c | 789 | ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ |
c53c9cf6 | 790 | ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \ |
817eb210 | 791 | ARCH_KS8695 || MACH_RD88F5182 |
1da177e4 LT |
792 | help |
793 | If you say Y here, the LEDs on your machine will be used | |
794 | to provide useful information about your current system status. | |
795 | ||
796 | If you are compiling a kernel for a NetWinder or EBSA-285, you will | |
797 | be able to select which LEDs are active using the options below. If | |
798 | you are compiling a kernel for the EBSA-110 or the LART however, the | |
799 | red LED will simply flash regularly to indicate that the system is | |
800 | still functional. It is safe to say Y here if you have a CATS | |
801 | system, but the driver will do nothing. | |
802 | ||
803 | config LEDS_TIMER | |
804 | bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \ | |
eebdf7d7 DB |
805 | OMAP_OSK_MISTRAL || MACH_OMAP_H2 \ |
806 | || MACH_OMAP_PERSEUS2 | |
1da177e4 | 807 | depends on LEDS |
0567a0c0 | 808 | depends on !GENERIC_CLOCKEVENTS |
1da177e4 LT |
809 | default y if ARCH_EBSA110 |
810 | help | |
811 | If you say Y here, one of the system LEDs (the green one on the | |
812 | NetWinder, the amber one on the EBSA285, or the red one on the LART) | |
813 | will flash regularly to indicate that the system is still | |
814 | operational. This is mainly useful to kernel hackers who are | |
815 | debugging unstable kernels. | |
816 | ||
817 | The LART uses the same LED for both Timer LED and CPU usage LED | |
818 | functions. You may choose to use both, but the Timer LED function | |
819 | will overrule the CPU usage LED. | |
820 | ||
821 | config LEDS_CPU | |
822 | bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \ | |
eebdf7d7 DB |
823 | !ARCH_OMAP) \ |
824 | || OMAP_OSK_MISTRAL || MACH_OMAP_H2 \ | |
825 | || MACH_OMAP_PERSEUS2 | |
1da177e4 LT |
826 | depends on LEDS |
827 | help | |
828 | If you say Y here, the red LED will be used to give a good real | |
829 | time indication of CPU usage, by lighting whenever the idle task | |
830 | is not currently executing. | |
831 | ||
832 | The LART uses the same LED for both Timer LED and CPU usage LED | |
833 | functions. You may choose to use both, but the Timer LED function | |
834 | will overrule the CPU usage LED. | |
835 | ||
836 | config ALIGNMENT_TRAP | |
837 | bool | |
f12d0d7c | 838 | depends on CPU_CP15_MMU |
1da177e4 LT |
839 | default y if !ARCH_EBSA110 |
840 | help | |
84eb8d06 | 841 | ARM processors cannot fetch/store information which is not |
1da177e4 LT |
842 | naturally aligned on the bus, i.e., a 4 byte fetch must start at an |
843 | address divisible by 4. On 32-bit ARM processors, these non-aligned | |
844 | fetch/store instructions will be emulated in software if you say | |
845 | here, which has a severe performance impact. This is necessary for | |
846 | correct operation of some network protocols. With an IP-only | |
847 | configuration it is safe to say N, otherwise say Y. | |
848 | ||
849 | endmenu | |
850 | ||
851 | menu "Boot options" | |
852 | ||
853 | # Compressed boot loader in ROM. Yes, we really want to ask about | |
854 | # TEXT and BSS so we preserve their values in the config files. | |
855 | config ZBOOT_ROM_TEXT | |
856 | hex "Compressed ROM boot loader base address" | |
857 | default "0" | |
858 | help | |
859 | The physical address at which the ROM-able zImage is to be | |
860 | placed in the target. Platforms which normally make use of | |
861 | ROM-able zImage formats normally set this to a suitable | |
862 | value in their defconfig file. | |
863 | ||
864 | If ZBOOT_ROM is not enabled, this has no effect. | |
865 | ||
866 | config ZBOOT_ROM_BSS | |
867 | hex "Compressed ROM boot loader BSS address" | |
868 | default "0" | |
869 | help | |
f8c440b2 DF |
870 | The base address of an area of read/write memory in the target |
871 | for the ROM-able zImage which must be available while the | |
872 | decompressor is running. It must be large enough to hold the | |
873 | entire decompressed kernel plus an additional 128 KiB. | |
874 | Platforms which normally make use of ROM-able zImage formats | |
875 | normally set this to a suitable value in their defconfig file. | |
1da177e4 LT |
876 | |
877 | If ZBOOT_ROM is not enabled, this has no effect. | |
878 | ||
879 | config ZBOOT_ROM | |
880 | bool "Compressed boot loader in ROM/flash" | |
881 | depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS | |
882 | help | |
883 | Say Y here if you intend to execute your compressed kernel image | |
884 | (zImage) directly from ROM or flash. If unsure, say N. | |
885 | ||
886 | config CMDLINE | |
887 | string "Default kernel command string" | |
888 | default "" | |
889 | help | |
890 | On some architectures (EBSA110 and CATS), there is currently no way | |
891 | for the boot loader to pass arguments to the kernel. For these | |
892 | architectures, you should supply some command-line options at build | |
893 | time by entering them here. As a minimum, you should specify the | |
894 | memory size and the root device (e.g., mem=64M root=/dev/nfs). | |
895 | ||
896 | config XIP_KERNEL | |
897 | bool "Kernel Execute-In-Place from ROM" | |
898 | depends on !ZBOOT_ROM | |
899 | help | |
900 | Execute-In-Place allows the kernel to run from non-volatile storage | |
901 | directly addressable by the CPU, such as NOR flash. This saves RAM | |
902 | space since the text section of the kernel is not loaded from flash | |
903 | to RAM. Read-write sections, such as the data section and stack, | |
904 | are still copied to RAM. The XIP kernel is not compressed since | |
905 | it has to run directly from flash, so it will take more space to | |
906 | store it. The flash address used to link the kernel object files, | |
907 | and for storing it, is configuration dependent. Therefore, if you | |
908 | say Y here, you must know the proper physical address where to | |
909 | store the kernel image depending on your own flash memory usage. | |
910 | ||
911 | Also note that the make target becomes "make xipImage" rather than | |
912 | "make zImage" or "make Image". The final kernel binary to put in | |
913 | ROM memory will be arch/arm/boot/xipImage. | |
914 | ||
915 | If unsure, say N. | |
916 | ||
917 | config XIP_PHYS_ADDR | |
918 | hex "XIP Kernel Physical Location" | |
919 | depends on XIP_KERNEL | |
920 | default "0x00080000" | |
921 | help | |
922 | This is the physical address in your flash memory the kernel will | |
923 | be linked for and stored to. This address is dependent on your | |
924 | own flash usage. | |
925 | ||
c587e4a6 RP |
926 | config KEXEC |
927 | bool "Kexec system call (EXPERIMENTAL)" | |
928 | depends on EXPERIMENTAL | |
929 | help | |
930 | kexec is a system call that implements the ability to shutdown your | |
931 | current kernel, and to start another kernel. It is like a reboot | |
01dd2fbf | 932 | but it is independent of the system firmware. And like a reboot |
c587e4a6 RP |
933 | you can start any kernel with it, not just Linux. |
934 | ||
935 | It is an ongoing process to be certain the hardware in a machine | |
936 | is properly shutdown, so do not be surprised if this code does not | |
937 | initially work for you. It may help to enable device hotplugging | |
938 | support. | |
939 | ||
4cd9d6f7 RP |
940 | config ATAGS_PROC |
941 | bool "Export atags in procfs" | |
942 | default n | |
943 | help | |
944 | Should the atags used to boot the kernel be exported in an "atags" | |
945 | file in procfs. Useful with kexec. | |
946 | ||
1da177e4 LT |
947 | endmenu |
948 | ||
9e2697ff | 949 | if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA) |
1da177e4 LT |
950 | |
951 | menu "CPU Frequency scaling" | |
952 | ||
953 | source "drivers/cpufreq/Kconfig" | |
954 | ||
955 | config CPU_FREQ_SA1100 | |
956 | bool | |
07c6d48f | 957 | depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT) |
1da177e4 LT |
958 | default y |
959 | ||
960 | config CPU_FREQ_SA1110 | |
961 | bool | |
962 | depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3) | |
963 | default y | |
964 | ||
965 | config CPU_FREQ_INTEGRATOR | |
966 | tristate "CPUfreq driver for ARM Integrator CPUs" | |
967 | depends on ARCH_INTEGRATOR && CPU_FREQ | |
968 | default y | |
969 | help | |
970 | This enables the CPUfreq driver for ARM Integrator CPUs. | |
971 | ||
972 | For details, take a look at <file:Documentation/cpu-freq>. | |
973 | ||
974 | If in doubt, say Y. | |
975 | ||
3c8cd0cc PP |
976 | config CPU_FREQ_IMX |
977 | tristate "CPUfreq driver for i.MX CPUs" | |
978 | depends on ARCH_IMX && CPU_FREQ | |
979 | default n | |
980 | help | |
981 | This enables the CPUfreq driver for i.MX CPUs. | |
982 | ||
983 | If in doubt, say N. | |
984 | ||
9e2697ff RK |
985 | config CPU_FREQ_PXA |
986 | bool | |
987 | depends on CPU_FREQ && ARCH_PXA && PXA25x | |
988 | default y | |
989 | select CPU_FREQ_DEFAULT_GOV_USERSPACE | |
990 | ||
1da177e4 LT |
991 | endmenu |
992 | ||
993 | endif | |
994 | ||
995 | menu "Floating point emulation" | |
996 | ||
997 | comment "At least one emulation must be selected" | |
998 | ||
999 | config FPE_NWFPE | |
1000 | bool "NWFPE math emulation" | |
8993a44c | 1001 | depends on !AEABI || OABI_COMPAT |
1da177e4 LT |
1002 | ---help--- |
1003 | Say Y to include the NWFPE floating point emulator in the kernel. | |
1004 | This is necessary to run most binaries. Linux does not currently | |
1005 | support floating point hardware so you need to say Y here even if | |
1006 | your machine has an FPA or floating point co-processor podule. | |
1007 | ||
1008 | You may say N here if you are going to load the Acorn FPEmulator | |
1009 | early in the bootup. | |
1010 | ||
1011 | config FPE_NWFPE_XP | |
1012 | bool "Support extended precision" | |
bedf142b | 1013 | depends on FPE_NWFPE |
1da177e4 LT |
1014 | help |
1015 | Say Y to include 80-bit support in the kernel floating-point | |
1016 | emulator. Otherwise, only 32 and 64-bit support is compiled in. | |
1017 | Note that gcc does not generate 80-bit operations by default, | |
1018 | so in most cases this option only enlarges the size of the | |
1019 | floating point emulator without any good reason. | |
1020 | ||
1021 | You almost surely want to say N here. | |
1022 | ||
1023 | config FPE_FASTFPE | |
1024 | bool "FastFPE math emulation (EXPERIMENTAL)" | |
8993a44c | 1025 | depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL |
1da177e4 LT |
1026 | ---help--- |
1027 | Say Y here to include the FAST floating point emulator in the kernel. | |
1028 | This is an experimental much faster emulator which now also has full | |
1029 | precision for the mantissa. It does not support any exceptions. | |
1030 | It is very simple, and approximately 3-6 times faster than NWFPE. | |
1031 | ||
1032 | It should be sufficient for most programs. It may be not suitable | |
1033 | for scientific calculations, but you have to check this for yourself. | |
1034 | If you do not feel you need a faster FP emulation you should better | |
1035 | choose NWFPE. | |
1036 | ||
1037 | config VFP | |
1038 | bool "VFP-format floating point maths" | |
c00d4ffd | 1039 | depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON |
1da177e4 LT |
1040 | help |
1041 | Say Y to include VFP support code in the kernel. This is needed | |
1042 | if your hardware includes a VFP unit. | |
1043 | ||
1044 | Please see <file:Documentation/arm/VFP/release-notes.txt> for | |
1045 | release notes and additional status information. | |
1046 | ||
1047 | Say N if your target does not have VFP hardware. | |
1048 | ||
25ebee02 CM |
1049 | config VFPv3 |
1050 | bool | |
1051 | depends on VFP | |
1052 | default y if CPU_V7 | |
1053 | ||
b5872db4 CM |
1054 | config NEON |
1055 | bool "Advanced SIMD (NEON) Extension support" | |
1056 | depends on VFPv3 && CPU_V7 | |
1057 | help | |
1058 | Say Y to include support code for NEON, the ARMv7 Advanced SIMD | |
1059 | Extension. | |
1060 | ||
1da177e4 LT |
1061 | endmenu |
1062 | ||
1063 | menu "Userspace binary formats" | |
1064 | ||
1065 | source "fs/Kconfig.binfmt" | |
1066 | ||
1067 | config ARTHUR | |
1068 | tristate "RISC OS personality" | |
704bdda0 | 1069 | depends on !AEABI |
1da177e4 LT |
1070 | help |
1071 | Say Y here to include the kernel code necessary if you want to run | |
1072 | Acorn RISC OS/Arthur binaries under Linux. This code is still very | |
1073 | experimental; if this sounds frightening, say N and sleep in peace. | |
1074 | You can also say M here to compile this support as a module (which | |
1075 | will be called arthur). | |
1076 | ||
1077 | endmenu | |
1078 | ||
1079 | menu "Power management options" | |
1080 | ||
eceab4ac | 1081 | source "kernel/power/Kconfig" |
1da177e4 | 1082 | |
f4cb5700 JB |
1083 | config ARCH_SUSPEND_POSSIBLE |
1084 | def_bool y | |
1085 | ||
1da177e4 LT |
1086 | endmenu |
1087 | ||
d5950b43 SR |
1088 | source "net/Kconfig" |
1089 | ||
1da177e4 LT |
1090 | menu "Device Drivers" |
1091 | ||
1092 | source "drivers/base/Kconfig" | |
1093 | ||
c35bf4a5 PM |
1094 | source "drivers/connector/Kconfig" |
1095 | ||
f12d0d7c | 1096 | if ALIGNMENT_TRAP || !CPU_CP15_MMU |
1da177e4 LT |
1097 | source "drivers/mtd/Kconfig" |
1098 | endif | |
1099 | ||
1100 | source "drivers/parport/Kconfig" | |
1101 | ||
1102 | source "drivers/pnp/Kconfig" | |
1103 | ||
1104 | source "drivers/block/Kconfig" | |
1105 | ||
58273e55 RK |
1106 | # misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4 |
1107 | ||
1108 | source "drivers/misc/Kconfig" | |
1109 | ||
1da177e4 | 1110 | source "drivers/ide/Kconfig" |
1da177e4 LT |
1111 | |
1112 | source "drivers/scsi/Kconfig" | |
1113 | ||
eb370f0b MM |
1114 | source "drivers/ata/Kconfig" |
1115 | ||
1da177e4 LT |
1116 | source "drivers/md/Kconfig" |
1117 | ||
1118 | source "drivers/message/fusion/Kconfig" | |
1119 | ||
1120 | source "drivers/ieee1394/Kconfig" | |
1121 | ||
1122 | source "drivers/message/i2o/Kconfig" | |
1123 | ||
d5950b43 | 1124 | source "drivers/net/Kconfig" |
1da177e4 LT |
1125 | |
1126 | source "drivers/isdn/Kconfig" | |
1127 | ||
1128 | # input before char - char/joystick depends on it. As does USB. | |
1129 | ||
1130 | source "drivers/input/Kconfig" | |
1131 | ||
1132 | source "drivers/char/Kconfig" | |
1133 | ||
1134 | source "drivers/i2c/Kconfig" | |
1135 | ||
8ae12a0d DB |
1136 | source "drivers/spi/Kconfig" |
1137 | ||
a9c5fff5 DB |
1138 | source "drivers/gpio/Kconfig" |
1139 | ||
04916c0e AZ |
1140 | source "drivers/w1/Kconfig" |
1141 | ||
58273e55 RK |
1142 | source "drivers/power/Kconfig" |
1143 | ||
ad2f931d JD |
1144 | source "drivers/hwmon/Kconfig" |
1145 | ||
70dfa3f8 RK |
1146 | source "drivers/watchdog/Kconfig" |
1147 | ||
58273e55 | 1148 | source "drivers/ssb/Kconfig" |
1da177e4 | 1149 | |
58273e55 | 1150 | #source "drivers/l3/Kconfig" |
1da177e4 | 1151 | |
a4e137ab RK |
1152 | source "drivers/mfd/Kconfig" |
1153 | ||
1da177e4 LT |
1154 | source "drivers/media/Kconfig" |
1155 | ||
1156 | source "drivers/video/Kconfig" | |
1157 | ||
1158 | source "sound/Kconfig" | |
1159 | ||
c2dade51 SH |
1160 | source "drivers/hid/Kconfig" |
1161 | ||
1da177e4 LT |
1162 | source "drivers/usb/Kconfig" |
1163 | ||
1164 | source "drivers/mmc/Kconfig" | |
1165 | ||
58273e55 RK |
1166 | source "drivers/leds/Kconfig" |
1167 | ||
12b824fb AZ |
1168 | source "drivers/rtc/Kconfig" |
1169 | ||
5816815f DW |
1170 | source "drivers/dma/Kconfig" |
1171 | ||
abf07b19 DW |
1172 | source "drivers/dca/Kconfig" |
1173 | ||
1da177e4 LT |
1174 | endmenu |
1175 | ||
1176 | source "fs/Kconfig" | |
1177 | ||
1da177e4 LT |
1178 | source "arch/arm/Kconfig.debug" |
1179 | ||
1180 | source "security/Kconfig" | |
1181 | ||
1182 | source "crypto/Kconfig" | |
1183 | ||
1184 | source "lib/Kconfig" |