]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | config ARM |
2 | bool | |
3 | default y | |
b1b3f49c | 4 | select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE |
21266be9 | 5 | select ARCH_HAS_DEVMEM_IS_ALLOWED |
2b68f6ca | 6 | select ARCH_HAS_ELF_RANDOMIZE |
3d06770e | 7 | select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST |
171b3f0d | 8 | select ARCH_HAVE_CUSTOM_GPIO_H |
957e3fac | 9 | select ARCH_HAS_GCOV_PROFILE_ALL |
d7018848 | 10 | select ARCH_MIGHT_HAVE_PC_PARPORT |
4badad35 | 11 | select ARCH_SUPPORTS_ATOMIC_RMW |
017f161a | 12 | select ARCH_USE_BUILTIN_BSWAP |
0cbad9c9 | 13 | select ARCH_USE_CMPXCHG_LOCKREF |
b1b3f49c | 14 | select ARCH_WANT_IPC_PARSE_VERSION |
ee951c63 | 15 | select BUILDTIME_EXTABLE_SORT if MMU |
171b3f0d | 16 | select CLONE_BACKWARDS |
b1b3f49c | 17 | select CPU_PM if (SUSPEND || CPU_IDLE) |
dce5c9e3 | 18 | select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS |
b01aec9b BP |
19 | select EDAC_SUPPORT |
20 | select EDAC_ATOMIC_SCRUB | |
36d0fd21 | 21 | select GENERIC_ALLOCATOR |
4477ca45 | 22 | select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI) |
b1b3f49c | 23 | select GENERIC_CLOCKEVENTS_BROADCAST if SMP |
2937367b | 24 | select GENERIC_EARLY_IOREMAP |
171b3f0d | 25 | select GENERIC_IDLE_POLL_SETUP |
b1b3f49c RK |
26 | select GENERIC_IRQ_PROBE |
27 | select GENERIC_IRQ_SHOW | |
7c07005e | 28 | select GENERIC_IRQ_SHOW_LEVEL |
b1b3f49c | 29 | select GENERIC_PCI_IOMAP |
38ff87f7 | 30 | select GENERIC_SCHED_CLOCK |
b1b3f49c RK |
31 | select GENERIC_SMP_IDLE_THREAD |
32 | select GENERIC_STRNCPY_FROM_USER | |
33 | select GENERIC_STRNLEN_USER | |
a71b092a | 34 | select HANDLE_DOMAIN_IRQ |
b1b3f49c | 35 | select HARDIRQS_SW_RESEND |
7a017721 | 36 | select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT) |
0b7857db | 37 | select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 |
437682ee AB |
38 | select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU |
39 | select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU | |
e0c25d95 | 40 | select HAVE_ARCH_MMAP_RND_BITS if MMU |
91702175 | 41 | select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) |
0693bf68 | 42 | select HAVE_ARCH_TRACEHOOK |
b329f95d | 43 | select HAVE_ARM_SMCCC if CPU_V7 |
6077776b | 44 | select HAVE_CBPF_JIT |
51aaf81f | 45 | select HAVE_CC_STACKPROTECTOR |
171b3f0d | 46 | select HAVE_CONTEXT_TRACKING |
b1b3f49c RK |
47 | select HAVE_C_RECORDMCOUNT |
48 | select HAVE_DEBUG_KMEMLEAK | |
49 | select HAVE_DMA_API_DEBUG | |
b1b3f49c | 50 | select HAVE_DMA_CONTIGUOUS if MMU |
437682ee | 51 | select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU |
dce5c9e3 | 52 | select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU |
5f56a5df | 53 | select HAVE_EXIT_THREAD |
b1b3f49c | 54 | select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) |
0e341af8 | 55 | select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) |
b1b3f49c | 56 | select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) |
6b90bd4b | 57 | select HAVE_GCC_PLUGINS |
1fe53268 | 58 | select HAVE_GENERIC_DMA_COHERENT |
b1b3f49c RK |
59 | select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) |
60 | select HAVE_IDE if PCI || ISA || PCMCIA | |
87c46b6c | 61 | select HAVE_IRQ_TIME_ACCOUNTING |
e7db7b42 | 62 | select HAVE_KERNEL_GZIP |
f9b493ac | 63 | select HAVE_KERNEL_LZ4 |
6e8699f7 | 64 | select HAVE_KERNEL_LZMA |
b1b3f49c | 65 | select HAVE_KERNEL_LZO |
a7f464f3 | 66 | select HAVE_KERNEL_XZ |
cb1293e2 | 67 | select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M |
b1b3f49c RK |
68 | select HAVE_KRETPROBES if (HAVE_KPROBES) |
69 | select HAVE_MEMBLOCK | |
7d485f64 | 70 | select HAVE_MOD_ARCH_SPECIFIC |
42a0bb3f | 71 | select HAVE_NMI |
b1b3f49c | 72 | select HAVE_OPROFILE if (HAVE_PERF_EVENTS) |
0dc016db | 73 | select HAVE_OPTPROBES if !THUMB2_KERNEL |
7ada189f | 74 | select HAVE_PERF_EVENTS |
49863894 WD |
75 | select HAVE_PERF_REGS |
76 | select HAVE_PERF_USER_STACK_DUMP | |
a0ad5496 | 77 | select HAVE_RCU_TABLE_FREE if (SMP && ARM_LPAE) |
e513f8bf | 78 | select HAVE_REGS_AND_STACK_ACCESS_API |
b1b3f49c | 79 | select HAVE_SYSCALL_TRACEPOINTS |
af1839eb | 80 | select HAVE_UID16 |
31c1fc81 | 81 | select HAVE_VIRT_CPU_ACCOUNTING_GEN |
da0ec6f7 | 82 | select IRQ_FORCED_THREADING |
171b3f0d | 83 | select MODULES_USE_ELF_REL |
84f452b1 | 84 | select NO_BOOTMEM |
aa7d5f18 AB |
85 | select OF_EARLY_FLATTREE if OF |
86 | select OF_RESERVED_MEM if OF | |
171b3f0d RK |
87 | select OLD_SIGACTION |
88 | select OLD_SIGSUSPEND3 | |
b1b3f49c RK |
89 | select PERF_USE_VMALLOC |
90 | select RTC_LIB | |
91 | select SYS_SUPPORTS_APM_EMULATION | |
171b3f0d RK |
92 | # Above selects are sorted alphabetically; please add new ones |
93 | # according to that. Thanks. | |
1da177e4 LT |
94 | help |
95 | The ARM series is a line of low-power-consumption RISC chip designs | |
f6c8965a | 96 | licensed by ARM Ltd and targeted at embedded applications and |
1da177e4 | 97 | handhelds such as the Compaq IPAQ. ARM-based PCs are no longer |
f6c8965a | 98 | manufactured, but legacy ARM-based PC hardware remains popular in |
1da177e4 LT |
99 | Europe. There is an ARM Linux project with a web page at |
100 | <http://www.arm.linux.org.uk/>. | |
101 | ||
74facffe | 102 | config ARM_HAS_SG_CHAIN |
308c09f1 | 103 | select ARCH_HAS_SG_CHAIN |
74facffe RK |
104 | bool |
105 | ||
4ce63fcd MS |
106 | config NEED_SG_DMA_LENGTH |
107 | bool | |
108 | ||
109 | config ARM_DMA_USE_IOMMU | |
4ce63fcd | 110 | bool |
b1b3f49c RK |
111 | select ARM_HAS_SG_CHAIN |
112 | select NEED_SG_DMA_LENGTH | |
4ce63fcd | 113 | |
60460abf SWK |
114 | if ARM_DMA_USE_IOMMU |
115 | ||
116 | config ARM_DMA_IOMMU_ALIGNMENT | |
117 | int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers" | |
118 | range 4 9 | |
119 | default 8 | |
120 | help | |
121 | DMA mapping framework by default aligns all buffers to the smallest | |
122 | PAGE_SIZE order which is greater than or equal to the requested buffer | |
123 | size. This works well for buffers up to a few hundreds kilobytes, but | |
124 | for larger buffers it just a waste of address space. Drivers which has | |
125 | relatively small addressing window (like 64Mib) might run out of | |
126 | virtual space with just a few allocations. | |
127 | ||
128 | With this parameter you can specify the maximum PAGE_SIZE order for | |
129 | DMA IOMMU buffers. Larger buffers will be aligned only to this | |
130 | specified order. The order is expressed as a power of two multiplied | |
131 | by the PAGE_SIZE. | |
132 | ||
133 | endif | |
134 | ||
0b05da72 HUK |
135 | config MIGHT_HAVE_PCI |
136 | bool | |
137 | ||
75e7153a RB |
138 | config SYS_SUPPORTS_APM_EMULATION |
139 | bool | |
140 | ||
bc581770 LW |
141 | config HAVE_TCM |
142 | bool | |
143 | select GENERIC_ALLOCATOR | |
144 | ||
e119bfff RK |
145 | config HAVE_PROC_CPU |
146 | bool | |
147 | ||
ce816fa8 | 148 | config NO_IOPORT_MAP |
5ea81769 | 149 | bool |
5ea81769 | 150 | |
1da177e4 LT |
151 | config EISA |
152 | bool | |
153 | ---help--- | |
154 | The Extended Industry Standard Architecture (EISA) bus was | |
155 | developed as an open alternative to the IBM MicroChannel bus. | |
156 | ||
157 | The EISA bus provided some of the features of the IBM MicroChannel | |
158 | bus while maintaining backward compatibility with cards made for | |
159 | the older ISA bus. The EISA bus saw limited use between 1988 and | |
160 | 1995 when it was made obsolete by the PCI bus. | |
161 | ||
162 | Say Y here if you are building a kernel for an EISA-based machine. | |
163 | ||
164 | Otherwise, say N. | |
165 | ||
166 | config SBUS | |
167 | bool | |
168 | ||
f16fb1ec RK |
169 | config STACKTRACE_SUPPORT |
170 | bool | |
171 | default y | |
172 | ||
173 | config LOCKDEP_SUPPORT | |
174 | bool | |
175 | default y | |
176 | ||
7ad1bcb2 RK |
177 | config TRACE_IRQFLAGS_SUPPORT |
178 | bool | |
cb1293e2 | 179 | default !CPU_V7M |
7ad1bcb2 | 180 | |
1da177e4 LT |
181 | config RWSEM_XCHGADD_ALGORITHM |
182 | bool | |
8a87411b | 183 | default y |
1da177e4 | 184 | |
f0d1b0b3 DH |
185 | config ARCH_HAS_ILOG2_U32 |
186 | bool | |
f0d1b0b3 DH |
187 | |
188 | config ARCH_HAS_ILOG2_U64 | |
189 | bool | |
f0d1b0b3 | 190 | |
4a1b5733 EV |
191 | config ARCH_HAS_BANDGAP |
192 | bool | |
193 | ||
a5f4c561 SA |
194 | config FIX_EARLYCON_MEM |
195 | def_bool y if MMU | |
196 | ||
b89c3b16 AM |
197 | config GENERIC_HWEIGHT |
198 | bool | |
199 | default y | |
200 | ||
1da177e4 LT |
201 | config GENERIC_CALIBRATE_DELAY |
202 | bool | |
203 | default y | |
204 | ||
a08b6b79 AV |
205 | config ARCH_MAY_HAVE_PC_FDC |
206 | bool | |
207 | ||
5ac6da66 CL |
208 | config ZONE_DMA |
209 | bool | |
5ac6da66 | 210 | |
ccd7ab7f FT |
211 | config NEED_DMA_MAP_STATE |
212 | def_bool y | |
213 | ||
c7edc9e3 DL |
214 | config ARCH_SUPPORTS_UPROBES |
215 | def_bool y | |
216 | ||
58af4a24 RH |
217 | config ARCH_HAS_DMA_SET_COHERENT_MASK |
218 | bool | |
219 | ||
1da177e4 LT |
220 | config GENERIC_ISA_DMA |
221 | bool | |
222 | ||
1da177e4 LT |
223 | config FIQ |
224 | bool | |
225 | ||
13a5045d RH |
226 | config NEED_RET_TO_USER |
227 | bool | |
228 | ||
034d2f5a AV |
229 | config ARCH_MTD_XIP |
230 | bool | |
231 | ||
c760fc19 HC |
232 | config VECTORS_BASE |
233 | hex | |
6afd6fae | 234 | default 0xffff0000 if MMU || CPU_HIGH_VECTOR |
c760fc19 HC |
235 | default DRAM_BASE if REMAP_VECTORS_TO_RAM |
236 | default 0x00000000 | |
237 | help | |
19accfd3 RK |
238 | The base address of exception vectors. This must be two pages |
239 | in size. | |
c760fc19 | 240 | |
dc21af99 | 241 | config ARM_PATCH_PHYS_VIRT |
c1becedc RK |
242 | bool "Patch physical to virtual translations at runtime" if EMBEDDED |
243 | default y | |
b511d75d | 244 | depends on !XIP_KERNEL && MMU |
dc21af99 | 245 | help |
111e9a5c RK |
246 | Patch phys-to-virt and virt-to-phys translation functions at |
247 | boot and module load time according to the position of the | |
248 | kernel in system memory. | |
dc21af99 | 249 | |
111e9a5c | 250 | This can only be used with non-XIP MMU kernels where the base |
daece596 | 251 | of physical memory is at a 16MB boundary. |
dc21af99 | 252 | |
c1becedc RK |
253 | Only disable this option if you know that you do not require |
254 | this feature (eg, building a kernel for a single machine) and | |
255 | you need to shrink the kernel to the minimal size. | |
dc21af99 | 256 | |
c334bc15 RH |
257 | config NEED_MACH_IO_H |
258 | bool | |
259 | help | |
260 | Select this when mach/io.h is required to provide special | |
261 | definitions for this platform. The need for mach/io.h should | |
262 | be avoided when possible. | |
263 | ||
0cdc8b92 | 264 | config NEED_MACH_MEMORY_H |
1b9f95f8 NP |
265 | bool |
266 | help | |
0cdc8b92 NP |
267 | Select this when mach/memory.h is required to provide special |
268 | definitions for this platform. The need for mach/memory.h should | |
269 | be avoided when possible. | |
dc21af99 | 270 | |
1b9f95f8 | 271 | config PHYS_OFFSET |
974c0724 | 272 | hex "Physical address of main memory" if MMU |
c6f54a9b | 273 | depends on !ARM_PATCH_PHYS_VIRT |
974c0724 | 274 | default DRAM_BASE if !MMU |
c6f54a9b | 275 | default 0x00000000 if ARCH_EBSA110 || \ |
c6f54a9b UKK |
276 | ARCH_FOOTBRIDGE || \ |
277 | ARCH_INTEGRATOR || \ | |
278 | ARCH_IOP13XX || \ | |
279 | ARCH_KS8695 || \ | |
280 | (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET) | |
281 | default 0x10000000 if ARCH_OMAP1 || ARCH_RPC | |
282 | default 0x20000000 if ARCH_S5PV210 | |
283 | default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET | |
b8824c9a | 284 | default 0xc0000000 if ARCH_SA1100 |
111e9a5c | 285 | help |
1b9f95f8 NP |
286 | Please provide the physical address corresponding to the |
287 | location of main memory in your system. | |
cada3c08 | 288 | |
87e040b6 SG |
289 | config GENERIC_BUG |
290 | def_bool y | |
291 | depends on BUG | |
292 | ||
1bcad26e KS |
293 | config PGTABLE_LEVELS |
294 | int | |
295 | default 3 if ARM_LPAE | |
296 | default 2 | |
297 | ||
1da177e4 LT |
298 | source "init/Kconfig" |
299 | ||
dc52ddc0 MH |
300 | source "kernel/Kconfig.freezer" |
301 | ||
1da177e4 LT |
302 | menu "System Type" |
303 | ||
3c427975 HC |
304 | config MMU |
305 | bool "MMU-based Paged Memory Management Support" | |
306 | default y | |
307 | help | |
308 | Select if you want MMU-based virtualised addressing space | |
309 | support by paged memory management. If unsure, say 'Y'. | |
310 | ||
e0c25d95 DC |
311 | config ARCH_MMAP_RND_BITS_MIN |
312 | default 8 | |
313 | ||
314 | config ARCH_MMAP_RND_BITS_MAX | |
315 | default 14 if PAGE_OFFSET=0x40000000 | |
316 | default 15 if PAGE_OFFSET=0x80000000 | |
317 | default 16 | |
318 | ||
ccf50e23 RK |
319 | # |
320 | # The "ARM system type" choice list is ordered alphabetically by option | |
321 | # text. Please add new entries in the option alphabetic order. | |
322 | # | |
1da177e4 LT |
323 | choice |
324 | prompt "ARM system type" | |
70722803 | 325 | default ARM_SINGLE_ARMV7M if !MMU |
1420b22b | 326 | default ARCH_MULTIPLATFORM if MMU |
1da177e4 | 327 | |
387798b3 RH |
328 | config ARCH_MULTIPLATFORM |
329 | bool "Allow multiple platforms to be selected" | |
b1b3f49c | 330 | depends on MMU |
ddb902cc | 331 | select ARCH_WANT_OPTIONAL_GPIOLIB |
42dc836d | 332 | select ARM_HAS_SG_CHAIN |
387798b3 RH |
333 | select ARM_PATCH_PHYS_VIRT |
334 | select AUTO_ZRELADDR | |
6d0add40 | 335 | select CLKSRC_OF |
66314223 | 336 | select COMMON_CLK |
ddb902cc | 337 | select GENERIC_CLOCKEVENTS |
08d38beb | 338 | select MIGHT_HAVE_PCI |
387798b3 | 339 | select MULTI_IRQ_HANDLER |
66314223 DN |
340 | select SPARSE_IRQ |
341 | select USE_OF | |
66314223 | 342 | |
9c77bc43 SA |
343 | config ARM_SINGLE_ARMV7M |
344 | bool "ARMv7-M based platforms (Cortex-M0/M3/M4)" | |
345 | depends on !MMU | |
346 | select ARCH_WANT_OPTIONAL_GPIOLIB | |
347 | select ARM_NVIC | |
499f1640 | 348 | select AUTO_ZRELADDR |
9c77bc43 SA |
349 | select CLKSRC_OF |
350 | select COMMON_CLK | |
351 | select CPU_V7M | |
352 | select GENERIC_CLOCKEVENTS | |
353 | select NO_IOPORT_MAP | |
354 | select SPARSE_IRQ | |
355 | select USE_OF | |
356 | ||
4af6fee1 | 357 | |
93e22567 RK |
358 | config ARCH_CLPS711X |
359 | bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" | |
a3b8d4a5 | 360 | select ARCH_REQUIRE_GPIOLIB |
ea7d1bc9 | 361 | select AUTO_ZRELADDR |
c99f72ad | 362 | select CLKSRC_MMIO |
93e22567 RK |
363 | select COMMON_CLK |
364 | select CPU_ARM720T | |
4a8355c4 | 365 | select GENERIC_CLOCKEVENTS |
6597619f | 366 | select MFD_SYSCON |
e4e3a37d | 367 | select SOC_BUS |
93e22567 RK |
368 | help |
369 | Support for Cirrus Logic 711x/721x/731x based boards. | |
370 | ||
788c9700 RK |
371 | config ARCH_GEMINI |
372 | bool "Cortina Systems Gemini" | |
788c9700 | 373 | select ARCH_REQUIRE_GPIOLIB |
f3372c01 | 374 | select CLKSRC_MMIO |
b1b3f49c | 375 | select CPU_FA526 |
f3372c01 | 376 | select GENERIC_CLOCKEVENTS |
788c9700 RK |
377 | help |
378 | Support for the Cortina Systems Gemini family SoCs | |
379 | ||
1da177e4 LT |
380 | config ARCH_EBSA110 |
381 | bool "EBSA-110" | |
b1b3f49c | 382 | select ARCH_USES_GETTIMEOFFSET |
c750815e | 383 | select CPU_SA110 |
f7e68bbf | 384 | select ISA |
c334bc15 | 385 | select NEED_MACH_IO_H |
0cdc8b92 | 386 | select NEED_MACH_MEMORY_H |
ce816fa8 | 387 | select NO_IOPORT_MAP |
1da177e4 LT |
388 | help |
389 | This is an evaluation board for the StrongARM processor available | |
f6c8965a | 390 | from Digital. It has limited hardware on-board, including an |
1da177e4 LT |
391 | Ethernet interface, two PCMCIA sockets, two serial ports and a |
392 | parallel port. | |
393 | ||
e7736d47 LB |
394 | config ARCH_EP93XX |
395 | bool "EP93xx-based" | |
b1b3f49c RK |
396 | select ARCH_HAS_HOLES_MEMORYMODEL |
397 | select ARCH_REQUIRE_GPIOLIB | |
e7736d47 | 398 | select ARM_AMBA |
b8824c9a | 399 | select ARM_PATCH_PHYS_VIRT |
e7736d47 | 400 | select ARM_VIC |
b8824c9a | 401 | select AUTO_ZRELADDR |
6d803ba7 | 402 | select CLKDEV_LOOKUP |
000bc178 | 403 | select CLKSRC_MMIO |
b1b3f49c | 404 | select CPU_ARM920T |
000bc178 | 405 | select GENERIC_CLOCKEVENTS |
e7736d47 LB |
406 | help |
407 | This enables support for the Cirrus EP93xx series of CPUs. | |
408 | ||
1da177e4 LT |
409 | config ARCH_FOOTBRIDGE |
410 | bool "FootBridge" | |
c750815e | 411 | select CPU_SA110 |
1da177e4 | 412 | select FOOTBRIDGE |
4e8d7637 | 413 | select GENERIC_CLOCKEVENTS |
d0ee9f40 | 414 | select HAVE_IDE |
8ef6e620 | 415 | select NEED_MACH_IO_H if !MMU |
0cdc8b92 | 416 | select NEED_MACH_MEMORY_H |
f999b8bd MM |
417 | help |
418 | Support for systems based on the DC21285 companion chip | |
419 | ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. | |
1da177e4 | 420 | |
4af6fee1 DS |
421 | config ARCH_NETX |
422 | bool "Hilscher NetX based" | |
b1b3f49c | 423 | select ARM_VIC |
234b6ced | 424 | select CLKSRC_MMIO |
c750815e | 425 | select CPU_ARM926T |
2fcfe6b8 | 426 | select GENERIC_CLOCKEVENTS |
f999b8bd | 427 | help |
4af6fee1 DS |
428 | This enables support for systems based on the Hilscher NetX Soc |
429 | ||
3b938be6 RK |
430 | config ARCH_IOP13XX |
431 | bool "IOP13xx-based" | |
432 | depends on MMU | |
b1b3f49c | 433 | select CPU_XSC3 |
0cdc8b92 | 434 | select NEED_MACH_MEMORY_H |
13a5045d | 435 | select NEED_RET_TO_USER |
b1b3f49c RK |
436 | select PCI |
437 | select PLAT_IOP | |
438 | select VMSPLIT_1G | |
37ebbcff | 439 | select SPARSE_IRQ |
3b938be6 RK |
440 | help |
441 | Support for Intel's IOP13XX (XScale) family of processors. | |
442 | ||
3f7e5815 LB |
443 | config ARCH_IOP32X |
444 | bool "IOP32x-based" | |
a4f7e763 | 445 | depends on MMU |
b1b3f49c | 446 | select ARCH_REQUIRE_GPIOLIB |
c750815e | 447 | select CPU_XSCALE |
e9004f50 | 448 | select GPIO_IOP |
13a5045d | 449 | select NEED_RET_TO_USER |
f7e68bbf | 450 | select PCI |
b1b3f49c | 451 | select PLAT_IOP |
f999b8bd | 452 | help |
3f7e5815 LB |
453 | Support for Intel's 80219 and IOP32X (XScale) family of |
454 | processors. | |
455 | ||
456 | config ARCH_IOP33X | |
457 | bool "IOP33x-based" | |
458 | depends on MMU | |
b1b3f49c | 459 | select ARCH_REQUIRE_GPIOLIB |
c750815e | 460 | select CPU_XSCALE |
e9004f50 | 461 | select GPIO_IOP |
13a5045d | 462 | select NEED_RET_TO_USER |
3f7e5815 | 463 | select PCI |
b1b3f49c | 464 | select PLAT_IOP |
3f7e5815 LB |
465 | help |
466 | Support for Intel's IOP33X (XScale) family of processors. | |
1da177e4 | 467 | |
3b938be6 RK |
468 | config ARCH_IXP4XX |
469 | bool "IXP4xx-based" | |
a4f7e763 | 470 | depends on MMU |
58af4a24 | 471 | select ARCH_HAS_DMA_SET_COHERENT_MASK |
b1b3f49c | 472 | select ARCH_REQUIRE_GPIOLIB |
51aaf81f | 473 | select ARCH_SUPPORTS_BIG_ENDIAN |
234b6ced | 474 | select CLKSRC_MMIO |
c750815e | 475 | select CPU_XSCALE |
b1b3f49c | 476 | select DMABOUNCE if PCI |
3b938be6 | 477 | select GENERIC_CLOCKEVENTS |
0b05da72 | 478 | select MIGHT_HAVE_PCI |
c334bc15 | 479 | select NEED_MACH_IO_H |
9296d94d | 480 | select USB_EHCI_BIG_ENDIAN_DESC |
171b3f0d | 481 | select USB_EHCI_BIG_ENDIAN_MMIO |
c4713074 | 482 | help |
3b938be6 | 483 | Support for Intel's IXP4XX (XScale) family of processors. |
c4713074 | 484 | |
edabd38e SB |
485 | config ARCH_DOVE |
486 | bool "Marvell Dove" | |
edabd38e | 487 | select ARCH_REQUIRE_GPIOLIB |
756b2531 | 488 | select CPU_PJ4 |
edabd38e | 489 | select GENERIC_CLOCKEVENTS |
0f81bd43 | 490 | select MIGHT_HAVE_PCI |
b8cd337c | 491 | select MULTI_IRQ_HANDLER |
171b3f0d | 492 | select MVEBU_MBUS |
9139acd1 SH |
493 | select PINCTRL |
494 | select PINCTRL_DOVE | |
abcda1dc | 495 | select PLAT_ORION_LEGACY |
0bd86961 | 496 | select SPARSE_IRQ |
c5d431e8 | 497 | select PM_GENERIC_DOMAINS if PM |
788c9700 | 498 | help |
edabd38e | 499 | Support for the Marvell Dove SoC 88AP510 |
788c9700 RK |
500 | |
501 | config ARCH_KS8695 | |
502 | bool "Micrel/Kendin KS8695" | |
98830bc9 | 503 | select ARCH_REQUIRE_GPIOLIB |
c7e783d6 | 504 | select CLKSRC_MMIO |
b1b3f49c | 505 | select CPU_ARM922T |
c7e783d6 | 506 | select GENERIC_CLOCKEVENTS |
b1b3f49c | 507 | select NEED_MACH_MEMORY_H |
788c9700 RK |
508 | help |
509 | Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based | |
510 | System-on-Chip devices. | |
511 | ||
788c9700 RK |
512 | config ARCH_W90X900 |
513 | bool "Nuvoton W90X900 CPU" | |
c52d3d68 | 514 | select ARCH_REQUIRE_GPIOLIB |
6d803ba7 | 515 | select CLKDEV_LOOKUP |
6fa5d5f7 | 516 | select CLKSRC_MMIO |
b1b3f49c | 517 | select CPU_ARM926T |
58b5369e | 518 | select GENERIC_CLOCKEVENTS |
788c9700 | 519 | help |
a8bc4ead | 520 | Support for Nuvoton (Winbond logic dept.) ARM9 processor, |
521 | At present, the w90x900 has been renamed nuc900, regarding | |
522 | the ARM series product line, you can login the following | |
523 | link address to know more. | |
524 | ||
525 | <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/ | |
526 | ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller> | |
788c9700 | 527 | |
93e22567 RK |
528 | config ARCH_LPC32XX |
529 | bool "NXP LPC32XX" | |
530 | select ARCH_REQUIRE_GPIOLIB | |
531 | select ARM_AMBA | |
532 | select CLKDEV_LOOKUP | |
c227f127 VZ |
533 | select CLKSRC_LPC32XX |
534 | select COMMON_CLK | |
93e22567 RK |
535 | select CPU_ARM926T |
536 | select GENERIC_CLOCKEVENTS | |
8cb17b5e VZ |
537 | select MULTI_IRQ_HANDLER |
538 | select SPARSE_IRQ | |
93e22567 RK |
539 | select USE_OF |
540 | help | |
541 | Support for the NXP LPC32XX family of processors | |
542 | ||
1da177e4 | 543 | config ARCH_PXA |
2c8086a5 | 544 | bool "PXA2xx/PXA3xx-based" |
a4f7e763 | 545 | depends on MMU |
b1b3f49c RK |
546 | select ARCH_MTD_XIP |
547 | select ARCH_REQUIRE_GPIOLIB | |
548 | select ARM_CPU_SUSPEND if PM | |
549 | select AUTO_ZRELADDR | |
a1c0a6ad | 550 | select COMMON_CLK |
6d803ba7 | 551 | select CLKDEV_LOOKUP |
389d9b58 | 552 | select CLKSRC_PXA |
234b6ced | 553 | select CLKSRC_MMIO |
6f6caeaa | 554 | select CLKSRC_OF |
2f202861 | 555 | select CPU_XSCALE if !CPU_XSC3 |
981d0f39 | 556 | select GENERIC_CLOCKEVENTS |
157d2644 | 557 | select GPIO_PXA |
d0ee9f40 | 558 | select HAVE_IDE |
d6cf30ca | 559 | select IRQ_DOMAIN |
b1b3f49c | 560 | select MULTI_IRQ_HANDLER |
b1b3f49c RK |
561 | select PLAT_PXA |
562 | select SPARSE_IRQ | |
f999b8bd | 563 | help |
2c8086a5 | 564 | Support for Intel/Marvell's PXA2xx/PXA3xx processor line. |
1da177e4 LT |
565 | |
566 | config ARCH_RPC | |
567 | bool "RiscPC" | |
868e87cc | 568 | depends on MMU |
1da177e4 | 569 | select ARCH_ACORN |
a08b6b79 | 570 | select ARCH_MAY_HAVE_PC_FDC |
07f841b7 | 571 | select ARCH_SPARSEMEM_ENABLE |
5cfc8ee0 | 572 | select ARCH_USES_GETTIMEOFFSET |
fa04e209 | 573 | select CPU_SA110 |
b1b3f49c | 574 | select FIQ |
d0ee9f40 | 575 | select HAVE_IDE |
b1b3f49c RK |
576 | select HAVE_PATA_PLATFORM |
577 | select ISA_DMA_API | |
c334bc15 | 578 | select NEED_MACH_IO_H |
0cdc8b92 | 579 | select NEED_MACH_MEMORY_H |
ce816fa8 | 580 | select NO_IOPORT_MAP |
1da177e4 LT |
581 | help |
582 | On the Acorn Risc-PC, Linux can support the internal IDE disk and | |
583 | CD-ROM interface, serial and parallel port, and the floppy drive. | |
584 | ||
585 | config ARCH_SA1100 | |
586 | bool "SA1100-based" | |
b1b3f49c RK |
587 | select ARCH_MTD_XIP |
588 | select ARCH_REQUIRE_GPIOLIB | |
589 | select ARCH_SPARSEMEM_ENABLE | |
590 | select CLKDEV_LOOKUP | |
591 | select CLKSRC_MMIO | |
389d9b58 DL |
592 | select CLKSRC_PXA |
593 | select CLKSRC_OF if OF | |
1937f5b9 | 594 | select CPU_FREQ |
b1b3f49c | 595 | select CPU_SA1100 |
3e238be2 | 596 | select GENERIC_CLOCKEVENTS |
d0ee9f40 | 597 | select HAVE_IDE |
1eca42b4 | 598 | select IRQ_DOMAIN |
b1b3f49c | 599 | select ISA |
affcab32 | 600 | select MULTI_IRQ_HANDLER |
0cdc8b92 | 601 | select NEED_MACH_MEMORY_H |
375dec92 | 602 | select SPARSE_IRQ |
f999b8bd MM |
603 | help |
604 | Support for StrongARM 11x0 based boards. | |
1da177e4 | 605 | |
b130d5c2 KK |
606 | config ARCH_S3C24XX |
607 | bool "Samsung S3C24XX SoCs" | |
53650430 | 608 | select ARCH_REQUIRE_GPIOLIB |
335cce74 | 609 | select ATAGS |
b1b3f49c | 610 | select CLKDEV_LOOKUP |
4280506a | 611 | select CLKSRC_SAMSUNG_PWM |
7f78b6eb | 612 | select GENERIC_CLOCKEVENTS |
880cf071 | 613 | select GPIO_SAMSUNG |
20676c15 | 614 | select HAVE_S3C2410_I2C if I2C |
b130d5c2 | 615 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
b1b3f49c | 616 | select HAVE_S3C_RTC if RTC_CLASS |
17453dd2 | 617 | select MULTI_IRQ_HANDLER |
c334bc15 | 618 | select NEED_MACH_IO_H |
cd8dc7ae | 619 | select SAMSUNG_ATAGS |
1da177e4 | 620 | help |
b130d5c2 KK |
621 | Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 |
622 | and S3C2450 SoCs based systems, such as the Simtec Electronics BAST | |
623 | (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the | |
624 | Samsung SMDK2410 development board (and derivatives). | |
63b1f51b | 625 | |
7c6337e2 KH |
626 | config ARCH_DAVINCI |
627 | bool "TI DaVinci" | |
b1b3f49c | 628 | select ARCH_HAS_HOLES_MEMORYMODEL |
dce1115b | 629 | select ARCH_REQUIRE_GPIOLIB |
6d803ba7 | 630 | select CLKDEV_LOOKUP |
ce32c5c5 | 631 | select CPU_ARM926T |
20e9969b | 632 | select GENERIC_ALLOCATOR |
b1b3f49c | 633 | select GENERIC_CLOCKEVENTS |
dc7ad3b3 | 634 | select GENERIC_IRQ_CHIP |
b1b3f49c | 635 | select HAVE_IDE |
689e331f | 636 | select USE_OF |
b1b3f49c | 637 | select ZONE_DMA |
7c6337e2 KH |
638 | help |
639 | Support for TI's DaVinci platform. | |
640 | ||
a0694861 TL |
641 | config ARCH_OMAP1 |
642 | bool "TI OMAP1" | |
00a36698 | 643 | depends on MMU |
9af915da | 644 | select ARCH_HAS_HOLES_MEMORYMODEL |
a0694861 | 645 | select ARCH_OMAP |
21f47fbc | 646 | select ARCH_REQUIRE_GPIOLIB |
b1b3f49c | 647 | select CLKDEV_LOOKUP |
d6e15d78 | 648 | select CLKSRC_MMIO |
b1b3f49c | 649 | select GENERIC_CLOCKEVENTS |
a0694861 | 650 | select GENERIC_IRQ_CHIP |
a0694861 TL |
651 | select HAVE_IDE |
652 | select IRQ_DOMAIN | |
b694331c | 653 | select MULTI_IRQ_HANDLER |
a0694861 TL |
654 | select NEED_MACH_IO_H if PCCARD |
655 | select NEED_MACH_MEMORY_H | |
685e2d08 | 656 | select SPARSE_IRQ |
21f47fbc | 657 | help |
a0694861 | 658 | Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) |
02c981c0 | 659 | |
1da177e4 LT |
660 | endchoice |
661 | ||
387798b3 RH |
662 | menu "Multiple platform selection" |
663 | depends on ARCH_MULTIPLATFORM | |
664 | ||
665 | comment "CPU Core family selection" | |
666 | ||
f8afae40 AB |
667 | config ARCH_MULTI_V4 |
668 | bool "ARMv4 based platforms (FA526)" | |
669 | depends on !ARCH_MULTI_V6_V7 | |
670 | select ARCH_MULTI_V4_V5 | |
671 | select CPU_FA526 | |
672 | ||
387798b3 RH |
673 | config ARCH_MULTI_V4T |
674 | bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" | |
387798b3 | 675 | depends on !ARCH_MULTI_V6_V7 |
b1b3f49c | 676 | select ARCH_MULTI_V4_V5 |
24e860fb AB |
677 | select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \ |
678 | CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \ | |
679 | CPU_ARM925T || CPU_ARM940T) | |
387798b3 RH |
680 | |
681 | config ARCH_MULTI_V5 | |
682 | bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" | |
387798b3 | 683 | depends on !ARCH_MULTI_V6_V7 |
b1b3f49c | 684 | select ARCH_MULTI_V4_V5 |
12567bbd | 685 | select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \ |
24e860fb AB |
686 | CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \ |
687 | CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON) | |
387798b3 RH |
688 | |
689 | config ARCH_MULTI_V4_V5 | |
690 | bool | |
691 | ||
692 | config ARCH_MULTI_V6 | |
8dda05cc | 693 | bool "ARMv6 based platforms (ARM11)" |
387798b3 | 694 | select ARCH_MULTI_V6_V7 |
42f4754a | 695 | select CPU_V6K |
387798b3 RH |
696 | |
697 | config ARCH_MULTI_V7 | |
8dda05cc | 698 | bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" |
387798b3 RH |
699 | default y |
700 | select ARCH_MULTI_V6_V7 | |
b1b3f49c | 701 | select CPU_V7 |
90bc8ac7 | 702 | select HAVE_SMP |
387798b3 RH |
703 | |
704 | config ARCH_MULTI_V6_V7 | |
705 | bool | |
9352b05b | 706 | select MIGHT_HAVE_CACHE_L2X0 |
387798b3 RH |
707 | |
708 | config ARCH_MULTI_CPU_AUTO | |
709 | def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) | |
710 | select ARCH_MULTI_V5 | |
711 | ||
712 | endmenu | |
713 | ||
05e2a3de | 714 | config ARCH_VIRT |
e3246542 MY |
715 | bool "Dummy Virtual Machine" |
716 | depends on ARCH_MULTI_V7 | |
4b8b5f25 | 717 | select ARM_AMBA |
05e2a3de | 718 | select ARM_GIC |
0e2f91e9 | 719 | select ARM_GIC_V2M if PCI_MSI |
0b28f1db | 720 | select ARM_GIC_V3 |
05e2a3de | 721 | select ARM_PSCI |
4b8b5f25 | 722 | select HAVE_ARM_ARCH_TIMER |
05e2a3de | 723 | |
ccf50e23 RK |
724 | # |
725 | # This is sorted alphabetically by mach-* pathname. However, plat-* | |
726 | # Kconfigs may be included either alphabetically (according to the | |
727 | # plat- suffix) or along side the corresponding mach-* source. | |
728 | # | |
3e93a22b GC |
729 | source "arch/arm/mach-mvebu/Kconfig" |
730 | ||
445d9b30 TZ |
731 | source "arch/arm/mach-alpine/Kconfig" |
732 | ||
590b460c LP |
733 | source "arch/arm/mach-artpec/Kconfig" |
734 | ||
d9bfc86d OR |
735 | source "arch/arm/mach-asm9260/Kconfig" |
736 | ||
95b8f20f RK |
737 | source "arch/arm/mach-at91/Kconfig" |
738 | ||
1d22924e AB |
739 | source "arch/arm/mach-axxia/Kconfig" |
740 | ||
8ac49e04 CD |
741 | source "arch/arm/mach-bcm/Kconfig" |
742 | ||
1c37fa10 SH |
743 | source "arch/arm/mach-berlin/Kconfig" |
744 | ||
1da177e4 LT |
745 | source "arch/arm/mach-clps711x/Kconfig" |
746 | ||
d94f944e AV |
747 | source "arch/arm/mach-cns3xxx/Kconfig" |
748 | ||
95b8f20f RK |
749 | source "arch/arm/mach-davinci/Kconfig" |
750 | ||
df8d742e BS |
751 | source "arch/arm/mach-digicolor/Kconfig" |
752 | ||
95b8f20f RK |
753 | source "arch/arm/mach-dove/Kconfig" |
754 | ||
e7736d47 LB |
755 | source "arch/arm/mach-ep93xx/Kconfig" |
756 | ||
1da177e4 LT |
757 | source "arch/arm/mach-footbridge/Kconfig" |
758 | ||
59d3a193 PZ |
759 | source "arch/arm/mach-gemini/Kconfig" |
760 | ||
387798b3 RH |
761 | source "arch/arm/mach-highbank/Kconfig" |
762 | ||
389ee0c2 HZ |
763 | source "arch/arm/mach-hisi/Kconfig" |
764 | ||
1da177e4 LT |
765 | source "arch/arm/mach-integrator/Kconfig" |
766 | ||
3f7e5815 LB |
767 | source "arch/arm/mach-iop32x/Kconfig" |
768 | ||
769 | source "arch/arm/mach-iop33x/Kconfig" | |
1da177e4 | 770 | |
285f5fa7 DW |
771 | source "arch/arm/mach-iop13xx/Kconfig" |
772 | ||
1da177e4 LT |
773 | source "arch/arm/mach-ixp4xx/Kconfig" |
774 | ||
828989ad SS |
775 | source "arch/arm/mach-keystone/Kconfig" |
776 | ||
95b8f20f RK |
777 | source "arch/arm/mach-ks8695/Kconfig" |
778 | ||
3b8f5030 CC |
779 | source "arch/arm/mach-meson/Kconfig" |
780 | ||
17723fd3 JJ |
781 | source "arch/arm/mach-moxart/Kconfig" |
782 | ||
8c2ed9bc JS |
783 | source "arch/arm/mach-aspeed/Kconfig" |
784 | ||
794d15b2 SS |
785 | source "arch/arm/mach-mv78xx0/Kconfig" |
786 | ||
3995eb82 | 787 | source "arch/arm/mach-imx/Kconfig" |
1da177e4 | 788 | |
f682a218 MB |
789 | source "arch/arm/mach-mediatek/Kconfig" |
790 | ||
1d3f33d5 SG |
791 | source "arch/arm/mach-mxs/Kconfig" |
792 | ||
95b8f20f | 793 | source "arch/arm/mach-netx/Kconfig" |
49cbe786 | 794 | |
95b8f20f | 795 | source "arch/arm/mach-nomadik/Kconfig" |
95b8f20f | 796 | |
9851ca57 DT |
797 | source "arch/arm/mach-nspire/Kconfig" |
798 | ||
d48af15e TL |
799 | source "arch/arm/plat-omap/Kconfig" |
800 | ||
801 | source "arch/arm/mach-omap1/Kconfig" | |
1da177e4 | 802 | |
1dbae815 TL |
803 | source "arch/arm/mach-omap2/Kconfig" |
804 | ||
9dd0b194 | 805 | source "arch/arm/mach-orion5x/Kconfig" |
585cf175 | 806 | |
387798b3 RH |
807 | source "arch/arm/mach-picoxcell/Kconfig" |
808 | ||
95b8f20f RK |
809 | source "arch/arm/mach-pxa/Kconfig" |
810 | source "arch/arm/plat-pxa/Kconfig" | |
585cf175 | 811 | |
95b8f20f RK |
812 | source "arch/arm/mach-mmp/Kconfig" |
813 | ||
8c9184b7 NA |
814 | source "arch/arm/mach-oxnas/Kconfig" |
815 | ||
8fc1b0f8 KG |
816 | source "arch/arm/mach-qcom/Kconfig" |
817 | ||
95b8f20f RK |
818 | source "arch/arm/mach-realview/Kconfig" |
819 | ||
d63dc051 HS |
820 | source "arch/arm/mach-rockchip/Kconfig" |
821 | ||
95b8f20f | 822 | source "arch/arm/mach-sa1100/Kconfig" |
edabd38e | 823 | |
387798b3 RH |
824 | source "arch/arm/mach-socfpga/Kconfig" |
825 | ||
a7ed099f | 826 | source "arch/arm/mach-spear/Kconfig" |
a21765a7 | 827 | |
65ebcc11 SK |
828 | source "arch/arm/mach-sti/Kconfig" |
829 | ||
85fd6d63 | 830 | source "arch/arm/mach-s3c24xx/Kconfig" |
1da177e4 | 831 | |
431107ea | 832 | source "arch/arm/mach-s3c64xx/Kconfig" |
a08ab637 | 833 | |
170f4e42 KK |
834 | source "arch/arm/mach-s5pv210/Kconfig" |
835 | ||
83014579 | 836 | source "arch/arm/mach-exynos/Kconfig" |
e509b289 | 837 | source "arch/arm/plat-samsung/Kconfig" |
cc0e72b8 | 838 | |
882d01f9 | 839 | source "arch/arm/mach-shmobile/Kconfig" |
52c543f9 | 840 | |
3b52634f MR |
841 | source "arch/arm/mach-sunxi/Kconfig" |
842 | ||
156a0997 BS |
843 | source "arch/arm/mach-prima2/Kconfig" |
844 | ||
d6de5b02 MG |
845 | source "arch/arm/mach-tango/Kconfig" |
846 | ||
c5f80065 EG |
847 | source "arch/arm/mach-tegra/Kconfig" |
848 | ||
95b8f20f | 849 | source "arch/arm/mach-u300/Kconfig" |
1da177e4 | 850 | |
ba56a987 MY |
851 | source "arch/arm/mach-uniphier/Kconfig" |
852 | ||
95b8f20f | 853 | source "arch/arm/mach-ux500/Kconfig" |
1da177e4 LT |
854 | |
855 | source "arch/arm/mach-versatile/Kconfig" | |
856 | ||
ceade897 | 857 | source "arch/arm/mach-vexpress/Kconfig" |
420c34e4 | 858 | source "arch/arm/plat-versatile/Kconfig" |
ceade897 | 859 | |
6f35f9a9 TP |
860 | source "arch/arm/mach-vt8500/Kconfig" |
861 | ||
7ec80ddf | 862 | source "arch/arm/mach-w90x900/Kconfig" |
863 | ||
acede515 JN |
864 | source "arch/arm/mach-zx/Kconfig" |
865 | ||
9a45eb69 JC |
866 | source "arch/arm/mach-zynq/Kconfig" |
867 | ||
499f1640 SA |
868 | # ARMv7-M architecture |
869 | config ARCH_EFM32 | |
870 | bool "Energy Micro efm32" | |
871 | depends on ARM_SINGLE_ARMV7M | |
872 | select ARCH_REQUIRE_GPIOLIB | |
873 | help | |
874 | Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko | |
875 | processors. | |
876 | ||
877 | config ARCH_LPC18XX | |
878 | bool "NXP LPC18xx/LPC43xx" | |
879 | depends on ARM_SINGLE_ARMV7M | |
880 | select ARCH_HAS_RESET_CONTROLLER | |
881 | select ARM_AMBA | |
882 | select CLKSRC_LPC32XX | |
883 | select PINCTRL | |
884 | help | |
885 | Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4 | |
886 | high performance microcontrollers. | |
887 | ||
888 | config ARCH_STM32 | |
889 | bool "STMicrolectronics STM32" | |
890 | depends on ARM_SINGLE_ARMV7M | |
891 | select ARCH_HAS_RESET_CONTROLLER | |
892 | select ARMV7M_SYSTICK | |
25263186 | 893 | select CLKSRC_STM32 |
f64e9804 | 894 | select PINCTRL |
499f1640 SA |
895 | select RESET_CONTROLLER |
896 | help | |
897 | Support for STMicroelectronics STM32 processors. | |
898 | ||
fa65fc6b MC |
899 | config MACH_STM32F429 |
900 | bool "STMicrolectronics STM32F429" | |
901 | depends on ARCH_STM32 | |
902 | default y | |
903 | ||
1847119d VM |
904 | config ARCH_MPS2 |
905 | bool "ARM MPS2 paltform" | |
906 | depends on ARM_SINGLE_ARMV7M | |
907 | select ARM_AMBA | |
908 | select CLKSRC_MPS2 | |
909 | help | |
910 | Support for Cortex-M Prototyping System (or V2M-MPS2) which comes | |
911 | with a range of available cores like Cortex-M3/M4/M7. | |
912 | ||
913 | Please, note that depends which Application Note is used memory map | |
914 | for the platform may vary, so adjustment of RAM base might be needed. | |
915 | ||
1da177e4 LT |
916 | # Definitions to make life easier |
917 | config ARCH_ACORN | |
918 | bool | |
919 | ||
7ae1f7ec LB |
920 | config PLAT_IOP |
921 | bool | |
469d3044 | 922 | select GENERIC_CLOCKEVENTS |
7ae1f7ec | 923 | |
69b02f6a LB |
924 | config PLAT_ORION |
925 | bool | |
bfe45e0b | 926 | select CLKSRC_MMIO |
b1b3f49c | 927 | select COMMON_CLK |
dc7ad3b3 | 928 | select GENERIC_IRQ_CHIP |
278b45b0 | 929 | select IRQ_DOMAIN |
69b02f6a | 930 | |
abcda1dc TP |
931 | config PLAT_ORION_LEGACY |
932 | bool | |
933 | select PLAT_ORION | |
934 | ||
bd5ce433 EM |
935 | config PLAT_PXA |
936 | bool | |
937 | ||
f4b8b319 RK |
938 | config PLAT_VERSATILE |
939 | bool | |
940 | ||
d9a1beaa AC |
941 | source "arch/arm/firmware/Kconfig" |
942 | ||
1da177e4 LT |
943 | source arch/arm/mm/Kconfig |
944 | ||
afe4b25e | 945 | config IWMMXT |
d93003e8 SH |
946 | bool "Enable iWMMXt support" |
947 | depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B | |
948 | default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B | |
afe4b25e LB |
949 | help |
950 | Enable support for iWMMXt context switching at run time if | |
951 | running on a CPU that supports it. | |
952 | ||
52108641 | 953 | config MULTI_IRQ_HANDLER |
954 | bool | |
955 | help | |
956 | Allow each machine to specify it's own IRQ handler at run time. | |
957 | ||
3b93e7b0 HC |
958 | if !MMU |
959 | source "arch/arm/Kconfig-nommu" | |
960 | endif | |
961 | ||
3e0a07f8 GC |
962 | config PJ4B_ERRATA_4742 |
963 | bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation" | |
964 | depends on CPU_PJ4B && MACH_ARMADA_370 | |
965 | default y | |
966 | help | |
967 | When coming out of either a Wait for Interrupt (WFI) or a Wait for | |
968 | Event (WFE) IDLE states, a specific timing sensitivity exists between | |
969 | the retiring WFI/WFE instructions and the newly issued subsequent | |
970 | instructions. This sensitivity can result in a CPU hang scenario. | |
971 | Workaround: | |
972 | The software must insert either a Data Synchronization Barrier (DSB) | |
973 | or Data Memory Barrier (DMB) command immediately after the WFI/WFE | |
974 | instruction | |
975 | ||
f0c4b8d6 WD |
976 | config ARM_ERRATA_326103 |
977 | bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" | |
978 | depends on CPU_V6 | |
979 | help | |
980 | Executing a SWP instruction to read-only memory does not set bit 11 | |
981 | of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to | |
982 | treat the access as a read, preventing a COW from occurring and | |
983 | causing the faulting task to livelock. | |
984 | ||
9cba3ccc CM |
985 | config ARM_ERRATA_411920 |
986 | bool "ARM errata: Invalidation of the Instruction Cache operation can fail" | |
e399b1a4 | 987 | depends on CPU_V6 || CPU_V6K |
9cba3ccc CM |
988 | help |
989 | Invalidation of the Instruction Cache operation can | |
990 | fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. | |
991 | It does not affect the MPCore. This option enables the ARM Ltd. | |
992 | recommended workaround. | |
993 | ||
7ce236fc CM |
994 | config ARM_ERRATA_430973 |
995 | bool "ARM errata: Stale prediction on replaced interworking branch" | |
996 | depends on CPU_V7 | |
997 | help | |
998 | This option enables the workaround for the 430973 Cortex-A8 | |
79403cda | 999 | r1p* erratum. If a code sequence containing an ARM/Thumb |
7ce236fc CM |
1000 | interworking branch is replaced with another code sequence at the |
1001 | same virtual address, whether due to self-modifying code or virtual | |
1002 | to physical address re-mapping, Cortex-A8 does not recover from the | |
1003 | stale interworking branch prediction. This results in Cortex-A8 | |
1004 | executing the new code sequence in the incorrect ARM or Thumb state. | |
1005 | The workaround enables the BTB/BTAC operations by setting ACTLR.IBE | |
1006 | and also flushes the branch target cache at every context switch. | |
1007 | Note that setting specific bits in the ACTLR register may not be | |
1008 | available in non-secure mode. | |
1009 | ||
855c551f CM |
1010 | config ARM_ERRATA_458693 |
1011 | bool "ARM errata: Processor deadlock when a false hazard is created" | |
1012 | depends on CPU_V7 | |
62e4d357 | 1013 | depends on !ARCH_MULTIPLATFORM |
855c551f CM |
1014 | help |
1015 | This option enables the workaround for the 458693 Cortex-A8 (r2p0) | |
1016 | erratum. For very specific sequences of memory operations, it is | |
1017 | possible for a hazard condition intended for a cache line to instead | |
1018 | be incorrectly associated with a different cache line. This false | |
1019 | hazard might then cause a processor deadlock. The workaround enables | |
1020 | the L1 caching of the NEON accesses and disables the PLD instruction | |
1021 | in the ACTLR register. Note that setting specific bits in the ACTLR | |
1022 | register may not be available in non-secure mode. | |
1023 | ||
0516e464 CM |
1024 | config ARM_ERRATA_460075 |
1025 | bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" | |
1026 | depends on CPU_V7 | |
62e4d357 | 1027 | depends on !ARCH_MULTIPLATFORM |
0516e464 CM |
1028 | help |
1029 | This option enables the workaround for the 460075 Cortex-A8 (r2p0) | |
1030 | erratum. Any asynchronous access to the L2 cache may encounter a | |
1031 | situation in which recent store transactions to the L2 cache are lost | |
1032 | and overwritten with stale memory contents from external memory. The | |
1033 | workaround disables the write-allocate mode for the L2 cache via the | |
1034 | ACTLR register. Note that setting specific bits in the ACTLR register | |
1035 | may not be available in non-secure mode. | |
1036 | ||
9f05027c WD |
1037 | config ARM_ERRATA_742230 |
1038 | bool "ARM errata: DMB operation may be faulty" | |
1039 | depends on CPU_V7 && SMP | |
62e4d357 | 1040 | depends on !ARCH_MULTIPLATFORM |
9f05027c WD |
1041 | help |
1042 | This option enables the workaround for the 742230 Cortex-A9 | |
1043 | (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction | |
1044 | between two write operations may not ensure the correct visibility | |
1045 | ordering of the two writes. This workaround sets a specific bit in | |
1046 | the diagnostic register of the Cortex-A9 which causes the DMB | |
1047 | instruction to behave as a DSB, ensuring the correct behaviour of | |
1048 | the two writes. | |
1049 | ||
a672e99b WD |
1050 | config ARM_ERRATA_742231 |
1051 | bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption" | |
1052 | depends on CPU_V7 && SMP | |
62e4d357 | 1053 | depends on !ARCH_MULTIPLATFORM |
a672e99b WD |
1054 | help |
1055 | This option enables the workaround for the 742231 Cortex-A9 | |
1056 | (r2p0..r2p2) erratum. Under certain conditions, specific to the | |
1057 | Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode, | |
1058 | accessing some data located in the same cache line, may get corrupted | |
1059 | data due to bad handling of the address hazard when the line gets | |
1060 | replaced from one of the CPUs at the same time as another CPU is | |
1061 | accessing it. This workaround sets specific bits in the diagnostic | |
1062 | register of the Cortex-A9 which reduces the linefill issuing | |
1063 | capabilities of the processor. | |
1064 | ||
69155794 JM |
1065 | config ARM_ERRATA_643719 |
1066 | bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" | |
1067 | depends on CPU_V7 && SMP | |
e5a5de44 | 1068 | default y |
69155794 JM |
1069 | help |
1070 | This option enables the workaround for the 643719 Cortex-A9 (prior to | |
1071 | r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR | |
1072 | register returns zero when it should return one. The workaround | |
1073 | corrects this value, ensuring cache maintenance operations which use | |
1074 | it behave as intended and avoiding data corruption. | |
1075 | ||
cdf357f1 WD |
1076 | config ARM_ERRATA_720789 |
1077 | bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" | |
e66dc745 | 1078 | depends on CPU_V7 |
cdf357f1 WD |
1079 | help |
1080 | This option enables the workaround for the 720789 Cortex-A9 (prior to | |
1081 | r2p0) erratum. A faulty ASID can be sent to the other CPUs for the | |
1082 | broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS. | |
1083 | As a consequence of this erratum, some TLB entries which should be | |
1084 | invalidated are not, resulting in an incoherency in the system page | |
1085 | tables. The workaround changes the TLB flushing routines to invalidate | |
1086 | entries regardless of the ASID. | |
475d92fc WD |
1087 | |
1088 | config ARM_ERRATA_743622 | |
1089 | bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" | |
1090 | depends on CPU_V7 | |
62e4d357 | 1091 | depends on !ARCH_MULTIPLATFORM |
475d92fc WD |
1092 | help |
1093 | This option enables the workaround for the 743622 Cortex-A9 | |
efbc74ac | 1094 | (r2p*) erratum. Under very rare conditions, a faulty |
475d92fc WD |
1095 | optimisation in the Cortex-A9 Store Buffer may lead to data |
1096 | corruption. This workaround sets a specific bit in the diagnostic | |
1097 | register of the Cortex-A9 which disables the Store Buffer | |
1098 | optimisation, preventing the defect from occurring. This has no | |
1099 | visible impact on the overall performance or power consumption of the | |
1100 | processor. | |
1101 | ||
9a27c27c WD |
1102 | config ARM_ERRATA_751472 |
1103 | bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" | |
ba90c516 | 1104 | depends on CPU_V7 |
62e4d357 | 1105 | depends on !ARCH_MULTIPLATFORM |
9a27c27c WD |
1106 | help |
1107 | This option enables the workaround for the 751472 Cortex-A9 (prior | |
1108 | to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the | |
1109 | completion of a following broadcasted operation if the second | |
1110 | operation is received by a CPU before the ICIALLUIS has completed, | |
1111 | potentially leading to corrupted entries in the cache or TLB. | |
1112 | ||
fcbdc5fe WD |
1113 | config ARM_ERRATA_754322 |
1114 | bool "ARM errata: possible faulty MMU translations following an ASID switch" | |
1115 | depends on CPU_V7 | |
1116 | help | |
1117 | This option enables the workaround for the 754322 Cortex-A9 (r2p*, | |
1118 | r3p*) erratum. A speculative memory access may cause a page table walk | |
1119 | which starts prior to an ASID switch but completes afterwards. This | |
1120 | can populate the micro-TLB with a stale entry which may be hit with | |
1121 | the new ASID. This workaround places two dsb instructions in the mm | |
1122 | switching code so that no page table walks can cross the ASID switch. | |
1123 | ||
5dab26af WD |
1124 | config ARM_ERRATA_754327 |
1125 | bool "ARM errata: no automatic Store Buffer drain" | |
1126 | depends on CPU_V7 && SMP | |
1127 | help | |
1128 | This option enables the workaround for the 754327 Cortex-A9 (prior to | |
1129 | r2p0) erratum. The Store Buffer does not have any automatic draining | |
1130 | mechanism and therefore a livelock may occur if an external agent | |
1131 | continuously polls a memory location waiting to observe an update. | |
1132 | This workaround defines cpu_relax() as smp_mb(), preventing correctly | |
1133 | written polling loops from denying visibility of updates to memory. | |
1134 | ||
145e10e1 CM |
1135 | config ARM_ERRATA_364296 |
1136 | bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" | |
fd832478 | 1137 | depends on CPU_V6 |
145e10e1 CM |
1138 | help |
1139 | This options enables the workaround for the 364296 ARM1136 | |
1140 | r0p2 erratum (possible cache data corruption with | |
1141 | hit-under-miss enabled). It sets the undocumented bit 31 in | |
1142 | the auxiliary control register and the FI bit in the control | |
1143 | register, thus disabling hit-under-miss without putting the | |
1144 | processor into full low interrupt latency mode. ARM11MPCore | |
1145 | is not affected. | |
1146 | ||
f630c1bd WD |
1147 | config ARM_ERRATA_764369 |
1148 | bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" | |
1149 | depends on CPU_V7 && SMP | |
1150 | help | |
1151 | This option enables the workaround for erratum 764369 | |
1152 | affecting Cortex-A9 MPCore with two or more processors (all | |
1153 | current revisions). Under certain timing circumstances, a data | |
1154 | cache line maintenance operation by MVA targeting an Inner | |
1155 | Shareable memory region may fail to proceed up to either the | |
1156 | Point of Coherency or to the Point of Unification of the | |
1157 | system. This workaround adds a DSB instruction before the | |
1158 | relevant cache maintenance functions and sets a specific bit | |
1159 | in the diagnostic control register of the SCU. | |
1160 | ||
7253b85c SH |
1161 | config ARM_ERRATA_775420 |
1162 | bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" | |
1163 | depends on CPU_V7 | |
1164 | help | |
1165 | This option enables the workaround for the 775420 Cortex-A9 (r2p2, | |
1166 | r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance | |
1167 | operation aborts with MMU exception, it might cause the processor | |
1168 | to deadlock. This workaround puts DSB before executing ISB if | |
1169 | an abort may occur on cache maintenance. | |
1170 | ||
93dc6887 CM |
1171 | config ARM_ERRATA_798181 |
1172 | bool "ARM errata: TLBI/DSB failure on Cortex-A15" | |
1173 | depends on CPU_V7 && SMP | |
1174 | help | |
1175 | On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not | |
1176 | adequately shooting down all use of the old entries. This | |
1177 | option enables the Linux kernel workaround for this erratum | |
1178 | which sends an IPI to the CPUs that are running the same ASID | |
1179 | as the one being invalidated. | |
1180 | ||
84b6504f WD |
1181 | config ARM_ERRATA_773022 |
1182 | bool "ARM errata: incorrect instructions may be executed from loop buffer" | |
1183 | depends on CPU_V7 | |
1184 | help | |
1185 | This option enables the workaround for the 773022 Cortex-A15 | |
1186 | (up to r0p4) erratum. In certain rare sequences of code, the | |
1187 | loop buffer may deliver incorrect instructions. This | |
1188 | workaround disables the loop buffer to avoid the erratum. | |
1189 | ||
1da177e4 LT |
1190 | endmenu |
1191 | ||
1192 | source "arch/arm/common/Kconfig" | |
1193 | ||
1da177e4 LT |
1194 | menu "Bus support" |
1195 | ||
1da177e4 LT |
1196 | config ISA |
1197 | bool | |
1da177e4 LT |
1198 | help |
1199 | Find out whether you have ISA slots on your motherboard. ISA is the | |
1200 | name of a bus system, i.e. the way the CPU talks to the other stuff | |
1201 | inside your box. Other bus systems are PCI, EISA, MicroChannel | |
1202 | (MCA) or VESA. ISA is an older system, now being displaced by PCI; | |
1203 | newer boards don't support it. If you have ISA, say Y, otherwise N. | |
1204 | ||
065909b9 | 1205 | # Select ISA DMA controller support |
1da177e4 LT |
1206 | config ISA_DMA |
1207 | bool | |
065909b9 | 1208 | select ISA_DMA_API |
1da177e4 | 1209 | |
065909b9 | 1210 | # Select ISA DMA interface |
5cae841b AV |
1211 | config ISA_DMA_API |
1212 | bool | |
5cae841b | 1213 | |
1da177e4 | 1214 | config PCI |
0b05da72 | 1215 | bool "PCI support" if MIGHT_HAVE_PCI |
1da177e4 LT |
1216 | help |
1217 | Find out whether you have a PCI motherboard. PCI is the name of a | |
1218 | bus system, i.e. the way the CPU talks to the other stuff inside | |
1219 | your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or | |
1220 | VESA. If you have PCI, say Y, otherwise N. | |
1221 | ||
52882173 AV |
1222 | config PCI_DOMAINS |
1223 | bool | |
1224 | depends on PCI | |
1225 | ||
8c7d1474 LP |
1226 | config PCI_DOMAINS_GENERIC |
1227 | def_bool PCI_DOMAINS | |
1228 | ||
b080ac8a MRJ |
1229 | config PCI_NANOENGINE |
1230 | bool "BSE nanoEngine PCI support" | |
1231 | depends on SA1100_NANOENGINE | |
1232 | help | |
1233 | Enable PCI on the BSE nanoEngine board. | |
1234 | ||
36e23590 MW |
1235 | config PCI_SYSCALL |
1236 | def_bool PCI | |
1237 | ||
a0113a99 MR |
1238 | config PCI_HOST_ITE8152 |
1239 | bool | |
1240 | depends on PCI && MACH_ARMCORE | |
1241 | default y | |
1242 | select DMABOUNCE | |
1243 | ||
1da177e4 LT |
1244 | source "drivers/pci/Kconfig" |
1245 | ||
1246 | source "drivers/pcmcia/Kconfig" | |
1247 | ||
1248 | endmenu | |
1249 | ||
1250 | menu "Kernel Features" | |
1251 | ||
3b55658a DM |
1252 | config HAVE_SMP |
1253 | bool | |
1254 | help | |
1255 | This option should be selected by machines which have an SMP- | |
1256 | capable CPU. | |
1257 | ||
1258 | The only effect of this option is to make the SMP-related | |
1259 | options available to the user for configuration. | |
1260 | ||
1da177e4 | 1261 | config SMP |
bb2d8130 | 1262 | bool "Symmetric Multi-Processing" |
fbb4ddac | 1263 | depends on CPU_V6K || CPU_V7 |
bc28248e | 1264 | depends on GENERIC_CLOCKEVENTS |
3b55658a | 1265 | depends on HAVE_SMP |
801bb21c | 1266 | depends on MMU || ARM_MPU |
0361748f | 1267 | select IRQ_WORK |
1da177e4 LT |
1268 | help |
1269 | This enables support for systems with more than one CPU. If you have | |
4a474157 RG |
1270 | a system with only one CPU, say N. If you have a system with more |
1271 | than one CPU, say Y. | |
1da177e4 | 1272 | |
4a474157 | 1273 | If you say N here, the kernel will run on uni- and multiprocessor |
1da177e4 | 1274 | machines, but will use only one CPU of a multiprocessor machine. If |
4a474157 RG |
1275 | you say Y here, the kernel will run on many, but not all, |
1276 | uniprocessor machines. On a uniprocessor machine, the kernel | |
1277 | will run faster if you say N here. | |
1da177e4 | 1278 | |
395cf969 | 1279 | See also <file:Documentation/x86/i386/IO-APIC.txt>, |
1da177e4 | 1280 | <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at |
50a23e6e | 1281 | <http://tldp.org/HOWTO/SMP-HOWTO.html>. |
1da177e4 LT |
1282 | |
1283 | If you don't know what to do here, say N. | |
1284 | ||
f00ec48f | 1285 | config SMP_ON_UP |
5744ff43 | 1286 | bool "Allow booting SMP kernel on uniprocessor systems" |
801bb21c | 1287 | depends on SMP && !XIP_KERNEL && MMU |
f00ec48f RK |
1288 | default y |
1289 | help | |
1290 | SMP kernels contain instructions which fail on non-SMP processors. | |
1291 | Enabling this option allows the kernel to modify itself to make | |
1292 | these instructions safe. Disabling it allows about 1K of space | |
1293 | savings. | |
1294 | ||
1295 | If you don't know what to do here, say Y. | |
1296 | ||
c9018aab VG |
1297 | config ARM_CPU_TOPOLOGY |
1298 | bool "Support cpu topology definition" | |
1299 | depends on SMP && CPU_V7 | |
1300 | default y | |
1301 | help | |
1302 | Support ARM cpu topology definition. The MPIDR register defines | |
1303 | affinity between processors which is then used to describe the cpu | |
1304 | topology of an ARM System. | |
1305 | ||
1306 | config SCHED_MC | |
1307 | bool "Multi-core scheduler support" | |
1308 | depends on ARM_CPU_TOPOLOGY | |
1309 | help | |
1310 | Multi-core scheduler support improves the CPU scheduler's decision | |
1311 | making when dealing with multi-core CPU chips at a cost of slightly | |
1312 | increased overhead in some places. If unsure say N here. | |
1313 | ||
1314 | config SCHED_SMT | |
1315 | bool "SMT scheduler support" | |
1316 | depends on ARM_CPU_TOPOLOGY | |
1317 | help | |
1318 | Improves the CPU scheduler's decision making when dealing with | |
1319 | MultiThreading at a cost of slightly increased overhead in some | |
1320 | places. If unsure say N here. | |
1321 | ||
a8cbcd92 RK |
1322 | config HAVE_ARM_SCU |
1323 | bool | |
a8cbcd92 RK |
1324 | help |
1325 | This option enables support for the ARM system coherency unit | |
1326 | ||
8a4da6e3 | 1327 | config HAVE_ARM_ARCH_TIMER |
022c03a2 MZ |
1328 | bool "Architected timer support" |
1329 | depends on CPU_V7 | |
8a4da6e3 | 1330 | select ARM_ARCH_TIMER |
0c403462 | 1331 | select GENERIC_CLOCKEVENTS |
022c03a2 MZ |
1332 | help |
1333 | This option enables support for the ARM architected timer | |
1334 | ||
f32f4ce2 RK |
1335 | config HAVE_ARM_TWD |
1336 | bool | |
da4a686a | 1337 | select CLKSRC_OF if OF |
f32f4ce2 RK |
1338 | help |
1339 | This options enables support for the ARM timer and watchdog unit | |
1340 | ||
e8db288e NP |
1341 | config MCPM |
1342 | bool "Multi-Cluster Power Management" | |
1343 | depends on CPU_V7 && SMP | |
1344 | help | |
1345 | This option provides the common power management infrastructure | |
1346 | for (multi-)cluster based systems, such as big.LITTLE based | |
1347 | systems. | |
1348 | ||
ebf4a5c5 HZ |
1349 | config MCPM_QUAD_CLUSTER |
1350 | bool | |
1351 | depends on MCPM | |
1352 | help | |
1353 | To avoid wasting resources unnecessarily, MCPM only supports up | |
1354 | to 2 clusters by default. | |
1355 | Platforms with 3 or 4 clusters that use MCPM must select this | |
1356 | option to allow the additional clusters to be managed. | |
1357 | ||
1c33be57 NP |
1358 | config BIG_LITTLE |
1359 | bool "big.LITTLE support (Experimental)" | |
1360 | depends on CPU_V7 && SMP | |
1361 | select MCPM | |
1362 | help | |
1363 | This option enables support selections for the big.LITTLE | |
1364 | system architecture. | |
1365 | ||
1366 | config BL_SWITCHER | |
1367 | bool "big.LITTLE switcher support" | |
6c044fec | 1368 | depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC |
51aaf81f | 1369 | select CPU_PM |
1c33be57 NP |
1370 | help |
1371 | The big.LITTLE "switcher" provides the core functionality to | |
1372 | transparently handle transition between a cluster of A15's | |
1373 | and a cluster of A7's in a big.LITTLE system. | |
1374 | ||
b22537c6 NP |
1375 | config BL_SWITCHER_DUMMY_IF |
1376 | tristate "Simple big.LITTLE switcher user interface" | |
1377 | depends on BL_SWITCHER && DEBUG_KERNEL | |
1378 | help | |
1379 | This is a simple and dummy char dev interface to control | |
1380 | the big.LITTLE switcher core code. It is meant for | |
1381 | debugging purposes only. | |
1382 | ||
8d5796d2 LB |
1383 | choice |
1384 | prompt "Memory split" | |
006fa259 | 1385 | depends on MMU |
8d5796d2 LB |
1386 | default VMSPLIT_3G |
1387 | help | |
1388 | Select the desired split between kernel and user memory. | |
1389 | ||
1390 | If you are not absolutely sure what you are doing, leave this | |
1391 | option alone! | |
1392 | ||
1393 | config VMSPLIT_3G | |
1394 | bool "3G/1G user/kernel split" | |
63ce446c NP |
1395 | config VMSPLIT_3G_OPT |
1396 | bool "3G/1G user/kernel split (for full 1G low memory)" | |
8d5796d2 LB |
1397 | config VMSPLIT_2G |
1398 | bool "2G/2G user/kernel split" | |
1399 | config VMSPLIT_1G | |
1400 | bool "1G/3G user/kernel split" | |
1401 | endchoice | |
1402 | ||
1403 | config PAGE_OFFSET | |
1404 | hex | |
006fa259 | 1405 | default PHYS_OFFSET if !MMU |
8d5796d2 LB |
1406 | default 0x40000000 if VMSPLIT_1G |
1407 | default 0x80000000 if VMSPLIT_2G | |
63ce446c | 1408 | default 0xB0000000 if VMSPLIT_3G_OPT |
8d5796d2 LB |
1409 | default 0xC0000000 |
1410 | ||
1da177e4 LT |
1411 | config NR_CPUS |
1412 | int "Maximum number of CPUs (2-32)" | |
1413 | range 2 32 | |
1414 | depends on SMP | |
1415 | default "4" | |
1416 | ||
a054a811 | 1417 | config HOTPLUG_CPU |
00b7dede | 1418 | bool "Support for hot-pluggable CPUs" |
40b31360 | 1419 | depends on SMP |
a054a811 RK |
1420 | help |
1421 | Say Y here to experiment with turning CPUs off and on. CPUs | |
1422 | can be controlled through /sys/devices/system/cpu. | |
1423 | ||
2bdd424f WD |
1424 | config ARM_PSCI |
1425 | bool "Support for the ARM Power State Coordination Interface (PSCI)" | |
e679660d | 1426 | depends on HAVE_ARM_SMCCC |
be120397 | 1427 | select ARM_PSCI_FW |
2bdd424f WD |
1428 | help |
1429 | Say Y here if you want Linux to communicate with system firmware | |
1430 | implementing the PSCI specification for CPU-centric power | |
1431 | management operations described in ARM document number ARM DEN | |
1432 | 0022A ("Power State Coordination Interface System Software on | |
1433 | ARM processors"). | |
1434 | ||
2a6ad871 MR |
1435 | # The GPIO number here must be sorted by descending number. In case of |
1436 | # a multiplatform kernel, we just want the highest value required by the | |
1437 | # selected platforms. | |
44986ab0 PDSN |
1438 | config ARCH_NR_GPIO |
1439 | int | |
b35d2e56 GF |
1440 | default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \ |
1441 | ARCH_ZYNQ | |
aa42587a TF |
1442 | default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ |
1443 | SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 | |
eb171a99 | 1444 | default 416 if ARCH_SUNXI |
06b851e5 | 1445 | default 392 if ARCH_U8500 |
01bb914c | 1446 | default 352 if ARCH_VT8500 |
7b5da4c3 | 1447 | default 288 if ARCH_ROCKCHIP |
2a6ad871 | 1448 | default 264 if MACH_H4700 |
44986ab0 PDSN |
1449 | default 0 |
1450 | help | |
1451 | Maximum number of GPIOs in the system. | |
1452 | ||
1453 | If unsure, leave the default value. | |
1454 | ||
d45a398f | 1455 | source kernel/Kconfig.preempt |
1da177e4 | 1456 | |
c9218b16 | 1457 | config HZ_FIXED |
f8065813 | 1458 | int |
070b8b43 | 1459 | default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \ |
a73ddc61 | 1460 | ARCH_S5PV210 || ARCH_EXYNOS4 |
1164f672 | 1461 | default 128 if SOC_AT91RM9200 |
47d84682 | 1462 | default 0 |
c9218b16 RK |
1463 | |
1464 | choice | |
47d84682 | 1465 | depends on HZ_FIXED = 0 |
c9218b16 RK |
1466 | prompt "Timer frequency" |
1467 | ||
1468 | config HZ_100 | |
1469 | bool "100 Hz" | |
1470 | ||
1471 | config HZ_200 | |
1472 | bool "200 Hz" | |
1473 | ||
1474 | config HZ_250 | |
1475 | bool "250 Hz" | |
1476 | ||
1477 | config HZ_300 | |
1478 | bool "300 Hz" | |
1479 | ||
1480 | config HZ_500 | |
1481 | bool "500 Hz" | |
1482 | ||
1483 | config HZ_1000 | |
1484 | bool "1000 Hz" | |
1485 | ||
1486 | endchoice | |
1487 | ||
1488 | config HZ | |
1489 | int | |
47d84682 | 1490 | default HZ_FIXED if HZ_FIXED != 0 |
c9218b16 RK |
1491 | default 100 if HZ_100 |
1492 | default 200 if HZ_200 | |
1493 | default 250 if HZ_250 | |
1494 | default 300 if HZ_300 | |
1495 | default 500 if HZ_500 | |
1496 | default 1000 | |
1497 | ||
1498 | config SCHED_HRTICK | |
1499 | def_bool HIGH_RES_TIMERS | |
f8065813 | 1500 | |
16c79651 | 1501 | config THUMB2_KERNEL |
bc7dea00 | 1502 | bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY |
4477ca45 | 1503 | depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K |
bc7dea00 | 1504 | default y if CPU_THUMBONLY |
16c79651 CM |
1505 | select AEABI |
1506 | select ARM_ASM_UNIFIED | |
89bace65 | 1507 | select ARM_UNWIND |
16c79651 CM |
1508 | help |
1509 | By enabling this option, the kernel will be compiled in | |
1510 | Thumb-2 mode. A compiler/assembler that understand the unified | |
1511 | ARM-Thumb syntax is needed. | |
1512 | ||
1513 | If unsure, say N. | |
1514 | ||
6f685c5c DM |
1515 | config THUMB2_AVOID_R_ARM_THM_JUMP11 |
1516 | bool "Work around buggy Thumb-2 short branch relocations in gas" | |
1517 | depends on THUMB2_KERNEL && MODULES | |
1518 | default y | |
1519 | help | |
1520 | Various binutils versions can resolve Thumb-2 branches to | |
1521 | locally-defined, preemptible global symbols as short-range "b.n" | |
1522 | branch instructions. | |
1523 | ||
1524 | This is a problem, because there's no guarantee the final | |
1525 | destination of the symbol, or any candidate locations for a | |
1526 | trampoline, are within range of the branch. For this reason, the | |
1527 | kernel does not support fixing up the R_ARM_THM_JUMP11 (102) | |
1528 | relocation in modules at all, and it makes little sense to add | |
1529 | support. | |
1530 | ||
1531 | The symptom is that the kernel fails with an "unsupported | |
1532 | relocation" error when loading some modules. | |
1533 | ||
1534 | Until fixed tools are available, passing | |
1535 | -fno-optimize-sibling-calls to gcc should prevent gcc generating | |
1536 | code which hits this problem, at the cost of a bit of extra runtime | |
1537 | stack usage in some cases. | |
1538 | ||
1539 | The problem is described in more detail at: | |
1540 | https://bugs.launchpad.net/binutils-linaro/+bug/725126 | |
1541 | ||
1542 | Only Thumb-2 kernels are affected. | |
1543 | ||
1544 | Unless you are sure your tools don't have this problem, say Y. | |
1545 | ||
0becb088 CM |
1546 | config ARM_ASM_UNIFIED |
1547 | bool | |
1548 | ||
42f25bdd NP |
1549 | config ARM_PATCH_IDIV |
1550 | bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()" | |
1551 | depends on CPU_32v7 && !XIP_KERNEL | |
1552 | default y | |
1553 | help | |
1554 | The ARM compiler inserts calls to __aeabi_idiv() and | |
1555 | __aeabi_uidiv() when it needs to perform division on signed | |
1556 | and unsigned integers. Some v7 CPUs have support for the sdiv | |
1557 | and udiv instructions that can be used to implement those | |
1558 | functions. | |
1559 | ||
1560 | Enabling this option allows the kernel to modify itself to | |
1561 | replace the first two instructions of these library functions | |
1562 | with the sdiv or udiv plus "bx lr" instructions when the CPU | |
1563 | it is running on supports them. Typically this will be faster | |
1564 | and less power intensive than running the original library | |
1565 | code to do integer division. | |
1566 | ||
704bdda0 NP |
1567 | config AEABI |
1568 | bool "Use the ARM EABI to compile the kernel" | |
1569 | help | |
1570 | This option allows for the kernel to be compiled using the latest | |
1571 | ARM ABI (aka EABI). This is only useful if you are using a user | |
1572 | space environment that is also compiled with EABI. | |
1573 | ||
1574 | Since there are major incompatibilities between the legacy ABI and | |
1575 | EABI, especially with regard to structure member alignment, this | |
1576 | option also changes the kernel syscall calling convention to | |
1577 | disambiguate both ABIs and allow for backward compatibility support | |
1578 | (selected with CONFIG_OABI_COMPAT). | |
1579 | ||
1580 | To use this you need GCC version 4.0.0 or later. | |
1581 | ||
6c90c872 | 1582 | config OABI_COMPAT |
a73a3ff1 | 1583 | bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" |
d6f94fa0 | 1584 | depends on AEABI && !THUMB2_KERNEL |
6c90c872 NP |
1585 | help |
1586 | This option preserves the old syscall interface along with the | |
1587 | new (ARM EABI) one. It also provides a compatibility layer to | |
1588 | intercept syscalls that have structure arguments which layout | |
1589 | in memory differs between the legacy ABI and the new ARM EABI | |
1590 | (only for non "thumb" binaries). This option adds a tiny | |
1591 | overhead to all syscalls and produces a slightly larger kernel. | |
91702175 KC |
1592 | |
1593 | The seccomp filter system will not be available when this is | |
1594 | selected, since there is no way yet to sensibly distinguish | |
1595 | between calling conventions during filtering. | |
1596 | ||
6c90c872 NP |
1597 | If you know you'll be using only pure EABI user space then you |
1598 | can say N here. If this option is not selected and you attempt | |
1599 | to execute a legacy ABI binary then the result will be | |
1600 | UNPREDICTABLE (in fact it can be predicted that it won't work | |
b02f8467 | 1601 | at all). If in doubt say N. |
6c90c872 | 1602 | |
eb33575c | 1603 | config ARCH_HAS_HOLES_MEMORYMODEL |
e80d6a24 | 1604 | bool |
e80d6a24 | 1605 | |
05944d74 RK |
1606 | config ARCH_SPARSEMEM_ENABLE |
1607 | bool | |
1608 | ||
07a2f737 RK |
1609 | config ARCH_SPARSEMEM_DEFAULT |
1610 | def_bool ARCH_SPARSEMEM_ENABLE | |
1611 | ||
05944d74 | 1612 | config ARCH_SELECT_MEMORY_MODEL |
be370302 | 1613 | def_bool ARCH_SPARSEMEM_ENABLE |
c80d79d7 | 1614 | |
7b7bf499 WD |
1615 | config HAVE_ARCH_PFN_VALID |
1616 | def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM | |
1617 | ||
b8cd51af SC |
1618 | config HAVE_GENERIC_RCU_GUP |
1619 | def_bool y | |
1620 | depends on ARM_LPAE | |
1621 | ||
053a96ca | 1622 | config HIGHMEM |
e8db89a2 RK |
1623 | bool "High Memory Support" |
1624 | depends on MMU | |
053a96ca NP |
1625 | help |
1626 | The address space of ARM processors is only 4 Gigabytes large | |
1627 | and it has to accommodate user address space, kernel address | |
1628 | space as well as some memory mapped IO. That means that, if you | |
1629 | have a large amount of physical memory and/or IO, not all of the | |
1630 | memory can be "permanently mapped" by the kernel. The physical | |
1631 | memory that is not permanently mapped is called "high memory". | |
1632 | ||
1633 | Depending on the selected kernel/user memory split, minimum | |
1634 | vmalloc space and actual amount of RAM, you may not need this | |
1635 | option which should result in a slightly faster kernel. | |
1636 | ||
1637 | If unsure, say n. | |
1638 | ||
65cec8e3 | 1639 | config HIGHPTE |
9a431bd5 | 1640 | bool "Allocate 2nd-level pagetables from highmem" if EXPERT |
65cec8e3 | 1641 | depends on HIGHMEM |
9a431bd5 | 1642 | default y |
b4d103d1 RK |
1643 | help |
1644 | The VM uses one page of physical memory for each page table. | |
1645 | For systems with a lot of processes, this can use a lot of | |
1646 | precious low memory, eventually leading to low memory being | |
1647 | consumed by page tables. Setting this option will allow | |
1648 | user-space 2nd level page tables to reside in high memory. | |
65cec8e3 | 1649 | |
a5e090ac RK |
1650 | config CPU_SW_DOMAIN_PAN |
1651 | bool "Enable use of CPU domains to implement privileged no-access" | |
1652 | depends on MMU && !ARM_LPAE | |
1b8873a0 JI |
1653 | default y |
1654 | help | |
a5e090ac RK |
1655 | Increase kernel security by ensuring that normal kernel accesses |
1656 | are unable to access userspace addresses. This can help prevent | |
1657 | use-after-free bugs becoming an exploitable privilege escalation | |
1658 | by ensuring that magic values (such as LIST_POISON) will always | |
1659 | fault when dereferenced. | |
1660 | ||
1661 | CPUs with low-vector mappings use a best-efforts implementation. | |
1662 | Their lower 1MB needs to remain accessible for the vectors, but | |
1663 | the remainder of userspace will become appropriately inaccessible. | |
65cec8e3 | 1664 | |
1b8873a0 | 1665 | config HW_PERF_EVENTS |
fa8ad788 MR |
1666 | def_bool y |
1667 | depends on ARM_PMU | |
1b8873a0 | 1668 | |
1355e2a6 CM |
1669 | config SYS_SUPPORTS_HUGETLBFS |
1670 | def_bool y | |
1671 | depends on ARM_LPAE | |
1672 | ||
8d962507 CM |
1673 | config HAVE_ARCH_TRANSPARENT_HUGEPAGE |
1674 | def_bool y | |
1675 | depends on ARM_LPAE | |
1676 | ||
4bfab203 SC |
1677 | config ARCH_WANT_GENERAL_HUGETLB |
1678 | def_bool y | |
1679 | ||
7d485f64 AB |
1680 | config ARM_MODULE_PLTS |
1681 | bool "Use PLTs to allow module memory to spill over into vmalloc area" | |
1682 | depends on MODULES | |
1683 | help | |
1684 | Allocate PLTs when loading modules so that jumps and calls whose | |
1685 | targets are too far away for their relative offsets to be encoded | |
1686 | in the instructions themselves can be bounced via veneers in the | |
1687 | module's PLT. This allows modules to be allocated in the generic | |
1688 | vmalloc area after the dedicated module memory area has been | |
1689 | exhausted. The modules will use slightly more memory, but after | |
1690 | rounding up to page size, the actual memory footprint is usually | |
1691 | the same. | |
1692 | ||
1693 | Say y if you are getting out of memory errors while loading modules | |
1694 | ||
3f22ab27 DH |
1695 | source "mm/Kconfig" |
1696 | ||
c1b2d970 | 1697 | config FORCE_MAX_ZONEORDER |
36d6c928 | 1698 | int "Maximum zone order" |
898f08e1 | 1699 | default "12" if SOC_AM33XX |
6d85e2b0 | 1700 | default "9" if SA1111 || ARCH_EFM32 |
c1b2d970 MD |
1701 | default "11" |
1702 | help | |
1703 | The kernel memory allocator divides physically contiguous memory | |
1704 | blocks into "zones", where each zone is a power of two number of | |
1705 | pages. This option selects the largest power of two that the kernel | |
1706 | keeps in the memory allocator. If you need to allocate very large | |
1707 | blocks of physically contiguous memory, then you may need to | |
1708 | increase this value. | |
1709 | ||
1710 | This config option is actually maximum order plus one. For example, | |
1711 | a value of 11 means that the largest free memory block is 2^10 pages. | |
1712 | ||
1da177e4 LT |
1713 | config ALIGNMENT_TRAP |
1714 | bool | |
f12d0d7c | 1715 | depends on CPU_CP15_MMU |
1da177e4 | 1716 | default y if !ARCH_EBSA110 |
e119bfff | 1717 | select HAVE_PROC_CPU if PROC_FS |
1da177e4 | 1718 | help |
84eb8d06 | 1719 | ARM processors cannot fetch/store information which is not |
1da177e4 LT |
1720 | naturally aligned on the bus, i.e., a 4 byte fetch must start at an |
1721 | address divisible by 4. On 32-bit ARM processors, these non-aligned | |
1722 | fetch/store instructions will be emulated in software if you say | |
1723 | here, which has a severe performance impact. This is necessary for | |
1724 | correct operation of some network protocols. With an IP-only | |
1725 | configuration it is safe to say N, otherwise say Y. | |
1726 | ||
39ec58f3 | 1727 | config UACCESS_WITH_MEMCPY |
38ef2ad5 LW |
1728 | bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()" |
1729 | depends on MMU | |
39ec58f3 LB |
1730 | default y if CPU_FEROCEON |
1731 | help | |
1732 | Implement faster copy_to_user and clear_user methods for CPU | |
1733 | cores where a 8-word STM instruction give significantly higher | |
1734 | memory write throughput than a sequence of individual 32bit stores. | |
1735 | ||
1736 | A possible side effect is a slight increase in scheduling latency | |
1737 | between threads sharing the same address space if they invoke | |
1738 | such copy operations with large buffers. | |
1739 | ||
1740 | However, if the CPU data cache is using a write-allocate mode, | |
1741 | this option is unlikely to provide any performance gain. | |
1742 | ||
70c70d97 NP |
1743 | config SECCOMP |
1744 | bool | |
1745 | prompt "Enable seccomp to safely compute untrusted bytecode" | |
1746 | ---help--- | |
1747 | This kernel feature is useful for number crunching applications | |
1748 | that may need to compute untrusted bytecode during their | |
1749 | execution. By using pipes or other transports made available to | |
1750 | the process as file descriptors supporting the read/write | |
1751 | syscalls, it's possible to isolate those applications in | |
1752 | their own address space using seccomp. Once seccomp is | |
1753 | enabled via prctl(PR_SET_SECCOMP), it cannot be disabled | |
1754 | and the task is only allowed to execute a few safe syscalls | |
1755 | defined by each seccomp mode. | |
1756 | ||
06e6295b SS |
1757 | config SWIOTLB |
1758 | def_bool y | |
1759 | ||
1760 | config IOMMU_HELPER | |
1761 | def_bool SWIOTLB | |
1762 | ||
02c2433b SS |
1763 | config PARAVIRT |
1764 | bool "Enable paravirtualization code" | |
1765 | help | |
1766 | This changes the kernel so it can modify itself when it is run | |
1767 | under a hypervisor, potentially improving performance significantly | |
1768 | over full virtualization. | |
1769 | ||
1770 | config PARAVIRT_TIME_ACCOUNTING | |
1771 | bool "Paravirtual steal time accounting" | |
1772 | select PARAVIRT | |
1773 | default n | |
1774 | help | |
1775 | Select this option to enable fine granularity task steal time | |
1776 | accounting. Time spent executing other tasks in parallel with | |
1777 | the current vCPU is discounted from the vCPU power. To account for | |
1778 | that, there can be a small performance impact. | |
1779 | ||
1780 | If in doubt, say N here. | |
1781 | ||
eff8d644 SS |
1782 | config XEN_DOM0 |
1783 | def_bool y | |
1784 | depends on XEN | |
1785 | ||
1786 | config XEN | |
c2ba1f7d | 1787 | bool "Xen guest support on ARM" |
85323a99 | 1788 | depends on ARM && AEABI && OF |
f880b67d | 1789 | depends on CPU_V7 && !CPU_V6 |
85323a99 | 1790 | depends on !GENERIC_ATOMIC64 |
7693decc | 1791 | depends on MMU |
51aaf81f | 1792 | select ARCH_DMA_ADDR_T_64BIT |
17b7ab80 | 1793 | select ARM_PSCI |
83862ccf | 1794 | select SWIOTLB_XEN |
02c2433b | 1795 | select PARAVIRT |
eff8d644 SS |
1796 | help |
1797 | Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. | |
1798 | ||
1da177e4 LT |
1799 | endmenu |
1800 | ||
1801 | menu "Boot options" | |
1802 | ||
9eb8f674 GL |
1803 | config USE_OF |
1804 | bool "Flattened Device Tree support" | |
b1b3f49c | 1805 | select IRQ_DOMAIN |
9eb8f674 | 1806 | select OF |
9eb8f674 GL |
1807 | help |
1808 | Include support for flattened device tree machine descriptions. | |
1809 | ||
bd51e2f5 NP |
1810 | config ATAGS |
1811 | bool "Support for the traditional ATAGS boot data passing" if USE_OF | |
1812 | default y | |
1813 | help | |
1814 | This is the traditional way of passing data to the kernel at boot | |
1815 | time. If you are solely relying on the flattened device tree (or | |
1816 | the ARM_ATAG_DTB_COMPAT option) then you may unselect this option | |
1817 | to remove ATAGS support from your kernel binary. If unsure, | |
1818 | leave this to y. | |
1819 | ||
1820 | config DEPRECATED_PARAM_STRUCT | |
1821 | bool "Provide old way to pass kernel parameters" | |
1822 | depends on ATAGS | |
1823 | help | |
1824 | This was deprecated in 2001 and announced to live on for 5 years. | |
1825 | Some old boot loaders still use this way. | |
1826 | ||
1da177e4 LT |
1827 | # Compressed boot loader in ROM. Yes, we really want to ask about |
1828 | # TEXT and BSS so we preserve their values in the config files. | |
1829 | config ZBOOT_ROM_TEXT | |
1830 | hex "Compressed ROM boot loader base address" | |
1831 | default "0" | |
1832 | help | |
1833 | The physical address at which the ROM-able zImage is to be | |
1834 | placed in the target. Platforms which normally make use of | |
1835 | ROM-able zImage formats normally set this to a suitable | |
1836 | value in their defconfig file. | |
1837 | ||
1838 | If ZBOOT_ROM is not enabled, this has no effect. | |
1839 | ||
1840 | config ZBOOT_ROM_BSS | |
1841 | hex "Compressed ROM boot loader BSS address" | |
1842 | default "0" | |
1843 | help | |
f8c440b2 DF |
1844 | The base address of an area of read/write memory in the target |
1845 | for the ROM-able zImage which must be available while the | |
1846 | decompressor is running. It must be large enough to hold the | |
1847 | entire decompressed kernel plus an additional 128 KiB. | |
1848 | Platforms which normally make use of ROM-able zImage formats | |
1849 | normally set this to a suitable value in their defconfig file. | |
1da177e4 LT |
1850 | |
1851 | If ZBOOT_ROM is not enabled, this has no effect. | |
1852 | ||
1853 | config ZBOOT_ROM | |
1854 | bool "Compressed boot loader in ROM/flash" | |
1855 | depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS | |
10968131 | 1856 | depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR |
1da177e4 LT |
1857 | help |
1858 | Say Y here if you intend to execute your compressed kernel image | |
1859 | (zImage) directly from ROM or flash. If unsure, say N. | |
1860 | ||
e2a6a3aa JB |
1861 | config ARM_APPENDED_DTB |
1862 | bool "Use appended device tree blob to zImage (EXPERIMENTAL)" | |
10968131 | 1863 | depends on OF |
e2a6a3aa JB |
1864 | help |
1865 | With this option, the boot code will look for a device tree binary | |
1866 | (DTB) appended to zImage | |
1867 | (e.g. cat zImage <filename>.dtb > zImage_w_dtb). | |
1868 | ||
1869 | This is meant as a backward compatibility convenience for those | |
1870 | systems with a bootloader that can't be upgraded to accommodate | |
1871 | the documented boot protocol using a device tree. | |
1872 | ||
1873 | Beware that there is very little in terms of protection against | |
1874 | this option being confused by leftover garbage in memory that might | |
1875 | look like a DTB header after a reboot if no actual DTB is appended | |
1876 | to zImage. Do not leave this option active in a production kernel | |
1877 | if you don't intend to always append a DTB. Proper passing of the | |
1878 | location into r2 of a bootloader provided DTB is always preferable | |
1879 | to this option. | |
1880 | ||
b90b9a38 NP |
1881 | config ARM_ATAG_DTB_COMPAT |
1882 | bool "Supplement the appended DTB with traditional ATAG information" | |
1883 | depends on ARM_APPENDED_DTB | |
1884 | help | |
1885 | Some old bootloaders can't be updated to a DTB capable one, yet | |
1886 | they provide ATAGs with memory configuration, the ramdisk address, | |
1887 | the kernel cmdline string, etc. Such information is dynamically | |
1888 | provided by the bootloader and can't always be stored in a static | |
1889 | DTB. To allow a device tree enabled kernel to be used with such | |
1890 | bootloaders, this option allows zImage to extract the information | |
1891 | from the ATAG list and store it at run time into the appended DTB. | |
1892 | ||
d0f34a11 GR |
1893 | choice |
1894 | prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT | |
1895 | default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER | |
1896 | ||
1897 | config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER | |
1898 | bool "Use bootloader kernel arguments if available" | |
1899 | help | |
1900 | Uses the command-line options passed by the boot loader instead of | |
1901 | the device tree bootargs property. If the boot loader doesn't provide | |
1902 | any, the device tree bootargs property will be used. | |
1903 | ||
1904 | config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND | |
1905 | bool "Extend with bootloader kernel arguments" | |
1906 | help | |
1907 | The command-line arguments provided by the boot loader will be | |
1908 | appended to the the device tree bootargs property. | |
1909 | ||
1910 | endchoice | |
1911 | ||
1da177e4 LT |
1912 | config CMDLINE |
1913 | string "Default kernel command string" | |
1914 | default "" | |
1915 | help | |
1916 | On some architectures (EBSA110 and CATS), there is currently no way | |
1917 | for the boot loader to pass arguments to the kernel. For these | |
1918 | architectures, you should supply some command-line options at build | |
1919 | time by entering them here. As a minimum, you should specify the | |
1920 | memory size and the root device (e.g., mem=64M root=/dev/nfs). | |
1921 | ||
4394c124 VB |
1922 | choice |
1923 | prompt "Kernel command line type" if CMDLINE != "" | |
1924 | default CMDLINE_FROM_BOOTLOADER | |
bd51e2f5 | 1925 | depends on ATAGS |
4394c124 VB |
1926 | |
1927 | config CMDLINE_FROM_BOOTLOADER | |
1928 | bool "Use bootloader kernel arguments if available" | |
1929 | help | |
1930 | Uses the command-line options passed by the boot loader. If | |
1931 | the boot loader doesn't provide any, the default kernel command | |
1932 | string provided in CMDLINE will be used. | |
1933 | ||
1934 | config CMDLINE_EXTEND | |
1935 | bool "Extend bootloader kernel arguments" | |
1936 | help | |
1937 | The command-line arguments provided by the boot loader will be | |
1938 | appended to the default kernel command string. | |
1939 | ||
92d2040d AH |
1940 | config CMDLINE_FORCE |
1941 | bool "Always use the default kernel command string" | |
92d2040d AH |
1942 | help |
1943 | Always use the default kernel command string, even if the boot | |
1944 | loader passes other arguments to the kernel. | |
1945 | This is useful if you cannot or don't want to change the | |
1946 | command-line options your boot loader passes to the kernel. | |
4394c124 | 1947 | endchoice |
92d2040d | 1948 | |
1da177e4 LT |
1949 | config XIP_KERNEL |
1950 | bool "Kernel Execute-In-Place from ROM" | |
10968131 | 1951 | depends on !ARM_LPAE && !ARCH_MULTIPLATFORM |
1da177e4 LT |
1952 | help |
1953 | Execute-In-Place allows the kernel to run from non-volatile storage | |
1954 | directly addressable by the CPU, such as NOR flash. This saves RAM | |
1955 | space since the text section of the kernel is not loaded from flash | |
1956 | to RAM. Read-write sections, such as the data section and stack, | |
1957 | are still copied to RAM. The XIP kernel is not compressed since | |
1958 | it has to run directly from flash, so it will take more space to | |
1959 | store it. The flash address used to link the kernel object files, | |
1960 | and for storing it, is configuration dependent. Therefore, if you | |
1961 | say Y here, you must know the proper physical address where to | |
1962 | store the kernel image depending on your own flash memory usage. | |
1963 | ||
1964 | Also note that the make target becomes "make xipImage" rather than | |
1965 | "make zImage" or "make Image". The final kernel binary to put in | |
1966 | ROM memory will be arch/arm/boot/xipImage. | |
1967 | ||
1968 | If unsure, say N. | |
1969 | ||
1970 | config XIP_PHYS_ADDR | |
1971 | hex "XIP Kernel Physical Location" | |
1972 | depends on XIP_KERNEL | |
1973 | default "0x00080000" | |
1974 | help | |
1975 | This is the physical address in your flash memory the kernel will | |
1976 | be linked for and stored to. This address is dependent on your | |
1977 | own flash usage. | |
1978 | ||
c587e4a6 RP |
1979 | config KEXEC |
1980 | bool "Kexec system call (EXPERIMENTAL)" | |
19ab428f | 1981 | depends on (!SMP || PM_SLEEP_SMP) |
cb1293e2 | 1982 | depends on !CPU_V7M |
2965faa5 | 1983 | select KEXEC_CORE |
c587e4a6 RP |
1984 | help |
1985 | kexec is a system call that implements the ability to shutdown your | |
1986 | current kernel, and to start another kernel. It is like a reboot | |
01dd2fbf | 1987 | but it is independent of the system firmware. And like a reboot |
c587e4a6 RP |
1988 | you can start any kernel with it, not just Linux. |
1989 | ||
1990 | It is an ongoing process to be certain the hardware in a machine | |
1991 | is properly shutdown, so do not be surprised if this code does not | |
bf220695 | 1992 | initially work for you. |
c587e4a6 | 1993 | |
4cd9d6f7 RP |
1994 | config ATAGS_PROC |
1995 | bool "Export atags in procfs" | |
bd51e2f5 | 1996 | depends on ATAGS && KEXEC |
b98d7291 | 1997 | default y |
4cd9d6f7 RP |
1998 | help |
1999 | Should the atags used to boot the kernel be exported in an "atags" | |
2000 | file in procfs. Useful with kexec. | |
2001 | ||
cb5d39b3 MW |
2002 | config CRASH_DUMP |
2003 | bool "Build kdump crash kernel (EXPERIMENTAL)" | |
cb5d39b3 MW |
2004 | help |
2005 | Generate crash dump after being started by kexec. This should | |
2006 | be normally only set in special crash dump kernels which are | |
2007 | loaded in the main kernel with kexec-tools into a specially | |
2008 | reserved region and then later executed after a crash by | |
2009 | kdump/kexec. The crash dump kernel must be compiled to a | |
2010 | memory address not used by the main kernel | |
2011 | ||
2012 | For more details see Documentation/kdump/kdump.txt | |
2013 | ||
e69edc79 EM |
2014 | config AUTO_ZRELADDR |
2015 | bool "Auto calculation of the decompressed kernel image address" | |
e69edc79 EM |
2016 | help |
2017 | ZRELADDR is the physical address where the decompressed kernel | |
2018 | image will be placed. If AUTO_ZRELADDR is selected, the address | |
2019 | will be determined at run-time by masking the current IP with | |
2020 | 0xf8000000. This assumes the zImage being placed in the first 128MB | |
2021 | from start of memory. | |
2022 | ||
81a0bc39 RF |
2023 | config EFI_STUB |
2024 | bool | |
2025 | ||
2026 | config EFI | |
2027 | bool "UEFI runtime support" | |
2028 | depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL | |
2029 | select UCS2_STRING | |
2030 | select EFI_PARAMS_FROM_FDT | |
2031 | select EFI_STUB | |
2032 | select EFI_ARMSTUB | |
2033 | select EFI_RUNTIME_WRAPPERS | |
2034 | ---help--- | |
2035 | This option provides support for runtime services provided | |
2036 | by UEFI firmware (such as non-volatile variables, realtime | |
2037 | clock, and platform reset). A UEFI stub is also provided to | |
2038 | allow the kernel to be booted as an EFI application. This | |
2039 | is only useful for kernels that may run on systems that have | |
2040 | UEFI firmware. | |
2041 | ||
1da177e4 LT |
2042 | endmenu |
2043 | ||
ac9d7efc | 2044 | menu "CPU Power Management" |
1da177e4 | 2045 | |
1da177e4 | 2046 | source "drivers/cpufreq/Kconfig" |
1da177e4 | 2047 | |
ac9d7efc RK |
2048 | source "drivers/cpuidle/Kconfig" |
2049 | ||
2050 | endmenu | |
2051 | ||
1da177e4 LT |
2052 | menu "Floating point emulation" |
2053 | ||
2054 | comment "At least one emulation must be selected" | |
2055 | ||
2056 | config FPE_NWFPE | |
2057 | bool "NWFPE math emulation" | |
593c252a | 2058 | depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL |
1da177e4 LT |
2059 | ---help--- |
2060 | Say Y to include the NWFPE floating point emulator in the kernel. | |
2061 | This is necessary to run most binaries. Linux does not currently | |
2062 | support floating point hardware so you need to say Y here even if | |
2063 | your machine has an FPA or floating point co-processor podule. | |
2064 | ||
2065 | You may say N here if you are going to load the Acorn FPEmulator | |
2066 | early in the bootup. | |
2067 | ||
2068 | config FPE_NWFPE_XP | |
2069 | bool "Support extended precision" | |
bedf142b | 2070 | depends on FPE_NWFPE |
1da177e4 LT |
2071 | help |
2072 | Say Y to include 80-bit support in the kernel floating-point | |
2073 | emulator. Otherwise, only 32 and 64-bit support is compiled in. | |
2074 | Note that gcc does not generate 80-bit operations by default, | |
2075 | so in most cases this option only enlarges the size of the | |
2076 | floating point emulator without any good reason. | |
2077 | ||
2078 | You almost surely want to say N here. | |
2079 | ||
2080 | config FPE_FASTFPE | |
2081 | bool "FastFPE math emulation (EXPERIMENTAL)" | |
d6f94fa0 | 2082 | depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 |
1da177e4 LT |
2083 | ---help--- |
2084 | Say Y here to include the FAST floating point emulator in the kernel. | |
2085 | This is an experimental much faster emulator which now also has full | |
2086 | precision for the mantissa. It does not support any exceptions. | |
2087 | It is very simple, and approximately 3-6 times faster than NWFPE. | |
2088 | ||
2089 | It should be sufficient for most programs. It may be not suitable | |
2090 | for scientific calculations, but you have to check this for yourself. | |
2091 | If you do not feel you need a faster FP emulation you should better | |
2092 | choose NWFPE. | |
2093 | ||
2094 | config VFP | |
2095 | bool "VFP-format floating point maths" | |
e399b1a4 | 2096 | depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON |
1da177e4 LT |
2097 | help |
2098 | Say Y to include VFP support code in the kernel. This is needed | |
2099 | if your hardware includes a VFP unit. | |
2100 | ||
2101 | Please see <file:Documentation/arm/VFP/release-notes.txt> for | |
2102 | release notes and additional status information. | |
2103 | ||
2104 | Say N if your target does not have VFP hardware. | |
2105 | ||
25ebee02 CM |
2106 | config VFPv3 |
2107 | bool | |
2108 | depends on VFP | |
2109 | default y if CPU_V7 | |
2110 | ||
b5872db4 CM |
2111 | config NEON |
2112 | bool "Advanced SIMD (NEON) Extension support" | |
2113 | depends on VFPv3 && CPU_V7 | |
2114 | help | |
2115 | Say Y to include support code for NEON, the ARMv7 Advanced SIMD | |
2116 | Extension. | |
2117 | ||
73c132c1 AB |
2118 | config KERNEL_MODE_NEON |
2119 | bool "Support for NEON in kernel mode" | |
c4a30c3b | 2120 | depends on NEON && AEABI |
73c132c1 AB |
2121 | help |
2122 | Say Y to include support for NEON in kernel mode. | |
2123 | ||
1da177e4 LT |
2124 | endmenu |
2125 | ||
2126 | menu "Userspace binary formats" | |
2127 | ||
2128 | source "fs/Kconfig.binfmt" | |
2129 | ||
1da177e4 LT |
2130 | endmenu |
2131 | ||
2132 | menu "Power management options" | |
2133 | ||
eceab4ac | 2134 | source "kernel/power/Kconfig" |
1da177e4 | 2135 | |
f4cb5700 | 2136 | config ARCH_SUSPEND_POSSIBLE |
19a0519d | 2137 | depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \ |
f0d75153 | 2138 | CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK |
f4cb5700 JB |
2139 | def_bool y |
2140 | ||
15e0d9e3 | 2141 | config ARM_CPU_SUSPEND |
8b6f2499 | 2142 | def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW |
1b9bdf5c | 2143 | depends on ARCH_SUSPEND_POSSIBLE |
15e0d9e3 | 2144 | |
603fb42a SC |
2145 | config ARCH_HIBERNATION_POSSIBLE |
2146 | bool | |
2147 | depends on MMU | |
2148 | default y if ARCH_SUSPEND_POSSIBLE | |
2149 | ||
1da177e4 LT |
2150 | endmenu |
2151 | ||
d5950b43 SR |
2152 | source "net/Kconfig" |
2153 | ||
ac25150f | 2154 | source "drivers/Kconfig" |
1da177e4 | 2155 | |
916f743d KG |
2156 | source "drivers/firmware/Kconfig" |
2157 | ||
1da177e4 LT |
2158 | source "fs/Kconfig" |
2159 | ||
1da177e4 LT |
2160 | source "arch/arm/Kconfig.debug" |
2161 | ||
2162 | source "security/Kconfig" | |
2163 | ||
2164 | source "crypto/Kconfig" | |
652ccae5 AB |
2165 | if CRYPTO |
2166 | source "arch/arm/crypto/Kconfig" | |
2167 | endif | |
1da177e4 LT |
2168 | |
2169 | source "lib/Kconfig" | |
749cf76c CD |
2170 | |
2171 | source "arch/arm/kvm/Kconfig" |